arm: dts: rockchip: sync rk3066/rk3188 DT files from linux-next v6.2-rc4

Sync rk3066/rk3188 DT files from Linux.
This is the state as of linux-next v6.2-rc4.
New nfc node for MK808 rk3066a.
CRU nodes now have a clock property.
To prefend dtoc errors a fixed clock must also be
included for tpl/spl in the rk3xxx-u-boot.dtsi file.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/dts/rk3066a-mk808.dts b/arch/arm/dts/rk3066a-mk808.dts
index 667d57a..06790f0 100644 (file)
--- a/arch/arm/dts/rk3066a-mk808.dts
+++ b/arch/arm/dts/rk3066a-mk808.dts
@@ -32,7 +32,7 @@
                keyup-threshold-microvolt = <2500000>;
                poll-interval = <100>;
 
-               recovery {
+               button-recovery {
                        label = "recovery";
                        linux,code = <KEY_VENDOR>;
                        press-threshold-microvolt = <0>;
@@ -157,7 +157,32 @@
        pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
        pinctrl-names = "default";
        vmmc-supply = <&vcc_wifi>;
+       #address-cells = <1>;
+       #size-cells = <0>;
        status = "okay";
+
+       brcmf: wifi@1 {
+               compatible = "brcm,bcm4329-fmac";
+               reg = <1>;
+       };
+};
+
+&nfc {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       status = "okay";
+
+       nand@0 {
+               reg = <0>;
+               label = "rk-nand";
+               nand-bus-width = <8>;
+               nand-ecc-mode = "hw";
+               nand-ecc-step-size = <1024>;
+               nand-ecc-strength = <40>;
+               nand-is-boot-medium;
+               rockchip,boot-blks = <8>;
+               rockchip,boot-ecc-strength = <24>;
+       };
 };
 
 &pinctrl {

diff --git a/arch/arm/dts/rk3066a.dtsi b/arch/arm/dts/rk3066a.dtsi
index c25b969..de9915d 100644 (file)
--- a/arch/arm/dts/rk3066a.dtsi
+++ b/arch/arm/dts/rk3066a.dtsi
@@ -202,8 +202,9 @@
        cru: clock-controller@20000000 {
                compatible = "rockchip,rk3066a-cru";
                reg = <0x20000000 0x1000>;
+               clocks = <&xin24m>;
+               clock-names = "xin24m";
                rockchip,grf = <&grf>;
-
                #clock-cells = <1>;
                #reset-cells = <1>;
                assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>,

diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
index e7138a4..118deac 100644 (file)
--- a/arch/arm/dts/rk3188-radxarock.dts
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -6,7 +6,6 @@
 /dts-v1/;
 #include <dt-bindings/input/input.h>
 #include "rk3188.dtsi"
-#include "rk3188-radxarock-u-boot.dtsi"
 
 / {
        model = "Radxa Rock";
@@ -25,7 +24,7 @@
                compatible = "gpio-keys";
                autorepeat;
 
-               power {
+               key-power {
                        gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_POWER>;
                        label = "GPIO Key Power";
@@ -72,7 +71,7 @@
                #sound-dai-cells = <0>;
        };
 
-       ir_recv: gpio-ir-receiver {
+       ir_recv: ir-receiver {
                compatible = "gpio-ir-receiver";
                gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
                pinctrl-names = "default";
@@ -127,18 +126,21 @@
 };
 
 &emac {
-       status = "okay";
-
+       phy = <&phy0>;
+       phy-supply = <&vcc_rmii>;
        pinctrl-names = "default";
        pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+       status = "okay";
 
-       phy = <&phy0>;
-       phy-supply = <&vcc_rmii>;
+       mdio {
+               #address-cells = <1>;
+               #size-cells = <0>;
 
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-               interrupt-parent = <&gpio3>;
-               interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+                       interrupt-parent = <&gpio3>;
+                       interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
+               };
        };
 };
 

diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi
index 9a80f83..44b54af 100644 (file)
--- a/arch/arm/dts/rk3188.dtsi
+++ b/arch/arm/dts/rk3188.dtsi
@@ -54,7 +54,7 @@
                };
        };
 
-       cpu0_opp_table: opp_table0 {
+       cpu0_opp_table: opp-table-0 {
                compatible = "operating-points-v2";
                opp-shared;
 
@@ -195,8 +195,9 @@
        cru: clock-controller@20000000 {
                compatible = "rockchip,rk3188-cru";
                reg = <0x20000000 0x1000>;
+               clocks = <&xin24m>;
+               clock-names = "xin24m";
                rockchip,grf = <&grf>;
-
                #clock-cells = <1>;
                #reset-cells = <1>;
        };
@@ -223,7 +224,7 @@
                #size-cells = <1>;
                ranges;
 
-               gpio0: gpio0@2000a000 {
+               gpio0: gpio@2000a000 {
                        compatible = "rockchip,rk3188-gpio-bank0";
                        reg = <0x2000a000 0x100>;
                        interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +237,7 @@
                        #interrupt-cells = <2>;
                };
 
-               gpio1: gpio1@2003c000 {
+               gpio1: gpio@2003c000 {
                        compatible = "rockchip,gpio-bank";
                        reg = <0x2003c000 0x100>;
                        interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -249,7 +250,7 @@
                        #interrupt-cells = <2>;
                };
 
-               gpio2: gpio2@2003e000 {
+               gpio2: gpio@2003e000 {
                        compatible = "rockchip,gpio-bank";
                        reg = <0x2003e000 0x100>;
                        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +263,7 @@
                        #interrupt-cells = <2>;
                };
 
-               gpio3: gpio3@20080000 {
+               gpio3: gpio@20080000 {
                        compatible = "rockchip,gpio-bank";
                        reg = <0x20080000 0x100>;
                        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -275,15 +276,15 @@
                        #interrupt-cells = <2>;
                };
 
-               pcfg_pull_up: pcfg_pull_up {
+               pcfg_pull_up: pcfg-pull-up {
                        bias-pull-up;
                };
 
-               pcfg_pull_down: pcfg_pull_down {
+               pcfg_pull_down: pcfg-pull-down {
                        bias-pull-down;
                };
 
-               pcfg_pull_none: pcfg_pull_none {
+               pcfg_pull_none: pcfg-pull-none {
                        bias-disable;
                };
 
@@ -378,7 +379,7 @@
                                rockchip,pins = <2 RK_PD3 1 &pcfg_pull_none>;
                        };
 
-                       lcdc1_rgb24: ldcd1-rgb24 {
+                       lcdc1_rgb24: lcdc1-rgb24 {
                                rockchip,pins = <2 RK_PA0 1 &pcfg_pull_none>,
                                                <2 RK_PA1 1 &pcfg_pull_none>,
                                                <2 RK_PA2 1 &pcfg_pull_none>,
@@ -606,7 +607,6 @@
 
 &global_timer {
        interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-       status = "disabled";
 };
 
 &local_timer {
@@ -641,6 +641,11 @@
 &grf {
        compatible = "rockchip,rk3188-grf", "syscon", "simple-mfd";
 
+       io_domains: io-domains {
+               compatible = "rockchip,rk3188-io-voltage-domain";
+               status = "disabled";
+       };
+
        usbphy: usbphy {
                compatible = "rockchip,rk3188-usb-phy";
                #address-cells = <1>;

diff --git a/arch/arm/dts/rk3xxx-u-boot.dtsi b/arch/arm/dts/rk3xxx-u-boot.dtsi
index f50bacd..6af6a45 100644 (file)
--- a/arch/arm/dts/rk3xxx-u-boot.dtsi
+++ b/arch/arm/dts/rk3xxx-u-boot.dtsi
@@ -33,3 +33,7 @@
 &uart2 {
        clock-frequency = <24000000>;
 };
+
+&xin24m {
+       bootph-all;
+};

diff --git a/arch/arm/dts/rk3xxx.dtsi b/arch/arm/dts/rk3xxx.dtsi
index 616a828..cb4e42e 100644 (file)
--- a/arch/arm/dts/rk3xxx.dtsi
+++ b/arch/arm/dts/rk3xxx.dtsi
@@ -76,6 +76,13 @@
                reg = <0x1013c200 0x20>;
                interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
                clocks = <&cru CORE_PERI>;
+               status = "disabled";
+               /* The clock source and the sched_clock provided by the arm_global_timer
+                * on Rockchip rk3066a/rk3188 are quite unstable because their rates
+                * depend on the CPU frequency.
+                * Keep the arm_global_timer disabled in order to have the
+                * DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default.
+                */
        };
 
        local_timer: local-timer@1013c600 {
@@ -186,8 +193,6 @@
                compatible = "snps,arc-emac";
                reg = <0x10204000 0x3c>;
                interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-               #address-cells = <1>;
-               #size-cells = <0>;
 
                rockchip,grf = <&grf>;