serial: Rename driver vcth to vct to support other board variants

Moved driver vcth.c to vct.c to better reflect the VCT board series.
This driver is now used by the VCT platforms:

vct_premium
vct_platinum
vct_platinumsvc

Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 17235ff..c7a1882 100644 (file)
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -38,7 +38,7 @@ COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
 COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
 COBJS-$(CONFIG_USB_TTY) += usbtty.o
-COBJS-$(CONFIG_VCTH_SERIAL) += vcth.o
+COBJS-$(CONFIG_VCT_SERIAL) += vct.o
 
 COBJS  := $(sort $(COBJS-y))
 SRCS   := $(COBJS:.o=.c)

diff --git a/drivers/serial/vcth.c b/drivers/serial/vct.c
similarity index 94%
rename from drivers/serial/vcth.c
rename to drivers/serial/vct.c
index 2c847d0..556c114 100755 (executable)
--- a/drivers/serial/vcth.c
+++ b/drivers/serial/vct.c
@@ -21,7 +21,11 @@
 #include <common.h>
 #include <asm/io.h>
 
+#ifdef CONFIG_VCT_PLATINUMAVC
+#define UART_1_BASE            0xBDC30000
+#else
 #define UART_1_BASE            0xBF89C000
+#endif
 
 #define        UART_RBR_OFF            0x00    /* receiver buffer reg          */
 #define        UART_THR_OFF            0x00    /* transmit holding  reg        */
@@ -53,7 +57,7 @@
 #define UART_7DATA_BITS                0x0002  /*   7 [bits]  1   bits   2     */
 #define UART_8DATA_BITS                0x0003  /*   8 [bits]  1   bits   2     */
 
-static void vcth_uart_set_baud_rate(u32 address, u32 dh, u32 dl)
+static void vct_uart_set_baud_rate(u32 address, u32 dh, u32 dl)
 {
        u32 val = __raw_readl(UART_1_BASE + UART_LCR_OFF);
 
@@ -74,7 +78,7 @@ static void vcth_uart_set_baud_rate(u32 address, u32 dh, u32 dl)
 int serial_init(void)
 {
        __raw_writel(UART_DIS_ALL_INTER, UART_1_BASE + UART_IER_OFF);
-       vcth_uart_set_baud_rate(UART_1_BASE, 0, UART_115200_BDR);
+       vct_uart_set_baud_rate(UART_1_BASE, 0, UART_115200_BDR);
        __raw_writel(UART_8DATA_BITS, UART_1_BASE + UART_LCR_OFF);
 
        return 0;