INSTALL: Fix pod verbatim lines

These are fixed to correctly line up and to fit into 79 columns

diff --git a/INSTALL b/INSTALL
index 8567d0e..99c65ab 100644 (file)
--- a/INSTALL
+++ b/INSTALL
@@ -569,16 +569,18 @@ After perl is installed, you may later wish to add modules (e.g. from
 CPAN) or scripts.  Configure will set up the following directories to
 be used for installing those add-on modules and scripts.
 
-    Configure variable Default value
-    $siteprefixexp     $prefixexp
-    $sitebinexp                $siteprefixexp/bin
-    $sitescriptexp     $siteprefixexp/bin
-    $sitelibexp                $siteprefixexp/lib/perl5/site_perl/$version
-    $sitearchexp       $siteprefixexp/lib/perl5/site_perl/$version/$archname
-    $siteman1direxp    $siteprefixexp/man/man1
-    $siteman3direxp    $siteprefixexp/man/man3
-    $sitehtml1direxp   (none)
-    $sitehtml3direxp   (none)
+   Configure        Default
+   variable          value
+ $siteprefixexp    $prefixexp
+ $sitebinexp       $siteprefixexp/bin
+ $sitescriptexp    $siteprefixexp/bin
+ $sitelibexp       $siteprefixexp/lib/perl5/site_perl/$version
+ $sitearchexp
+               $siteprefixexp/lib/perl5/site_perl/$version/$archname
+ $siteman1direxp   $siteprefixexp/man/man1
+ $siteman3direxp   $siteprefixexp/man/man3
+ $sitehtml1direxp  (none)
+ $sitehtml3direxp  (none)
 
 By default, ExtUtils::MakeMaker will install architecture-independent
 modules into $sitelib and architecture-dependent modules into $sitearch.
@@ -589,49 +591,51 @@ Lastly, if you are building a binary distribution of perl for
 distribution, Configure can optionally set up the following directories
 for you to use to distribute add-on modules.
 
-    Configure variable Default value
-    $vendorprefixexp   (none)
-    (The next ones are set only if vendorprefix is set.)
-    $vendorbinexp      $vendorprefixexp/bin
-    $vendorscriptexp   $vendorprefixexp/bin
-    $vendorlibexp
-       $vendorprefixexp/lib/perl5/vendor_perl/$version
-    $vendorarchexp
-       $vendorprefixexp/lib/perl5/vendor_perl/$version/$archname
-    $vendorman1direxp  $vendorprefixexp/man/man1
-    $vendorman3direxp  $vendorprefixexp/man/man3
-    $vendorhtml1direxp (none)
-    $vendorhtml3direxp (none)
+   Configure          Default
+   variable            value
+ $vendorprefixexp    (none)
+
+ (The next ones are set only if vendorprefix is set.)
+
+ $vendorbinexp       $vendorprefixexp/bin
+ $vendorscriptexp    $vendorprefixexp/bin
+ $vendorlibexp       $vendorprefixexp/lib/perl5/vendor_perl/$version
+ $vendorarchexp
+           $vendorprefixexp/lib/perl5/vendor_perl/$version/$archname
+ $vendorman1direxp   $vendorprefixexp/man/man1
+ $vendorman3direxp   $vendorprefixexp/man/man3
+ $vendorhtml1direxp  (none)
+ $vendorhtml3direxp  (none)
 
 These are normally empty, but may be set as needed.  For example,
 a vendor might choose the following settings:
 
-    $prefix            /usr
-    $siteprefix                /usr/local
-    $vendorprefix      /usr
+ $prefix           /usr
+ $siteprefix       /usr/local
+ $vendorprefix     /usr
 
 This would have the effect of setting the following:
 
-    $binexp            /usr/bin
-    $scriptdirexp      /usr/bin
-    $privlibexp                /usr/lib/perl5/$version
-    $archlibexp        /usr/lib/perl5/$version/$archname
-    $man1direxp                /usr/man/man1
-    $man3direxp                /usr/man/man3
-
-    $sitebinexp                /usr/local/bin
-    $sitescriptexp     /usr/local/bin
-    $sitelibexp                /usr/local/lib/perl5/site_perl/$version
-    $sitearchexp       /usr/local/lib/perl5/site_perl/$version/$archname
-    $siteman1direxp    /usr/local/man/man1
-    $siteman3direxp    /usr/local/man/man3
-
-    $vendorbinexp      /usr/bin
-    $vendorscriptexp   /usr/bin
-    $vendorlibexp      /usr/lib/perl5/vendor_perl/$version
-    $vendorarchexp     /usr/lib/perl5/vendor_perl/$version/$archname
-    $vendorman1direxp  /usr/man/man1
-    $vendorman3direxp  /usr/man/man3
+ $binexp           /usr/bin
+ $scriptdirexp     /usr/bin
+ $privlibexp       /usr/lib/perl5/$version
+ $archlibexp       /usr/lib/perl5/$version/$archname
+ $man1direxp       /usr/man/man1
+ $man3direxp       /usr/man/man3
+
+ $sitebinexp       /usr/local/bin
+ $sitescriptexp    /usr/local/bin
+ $sitelibexp       /usr/local/lib/perl5/site_perl/$version
+ $sitearchexp      /usr/local/lib/perl5/site_perl/$version/$archname
+ $siteman1direxp   /usr/local/man/man1
+ $siteman3direxp   /usr/local/man/man3
+
+ $vendorbinexp     /usr/bin
+ $vendorscriptexp  /usr/bin
+ $vendorlibexp     /usr/lib/perl5/vendor_perl/$version
+ $vendorarchexp    /usr/lib/perl5/vendor_perl/$version/$archname
+ $vendorman1direxp /usr/man/man1
+ $vendorman3direxp /usr/man/man3
 
 Note how in this example, the vendor-supplied directories are in the
 /usr hierarchy, while the directories reserved for the end user are in
@@ -650,7 +654,7 @@ are stored locally on your own disk and use $vendorprefix for
 site-specific files that are stored elsewhere on your organization's
 network.  One way to do that would be something like
 
-       sh Configure -Dsiteprefix=/usr/local -Dvendorprefix=/usr/share/perl
+ sh Configure -Dsiteprefix=/usr/local -Dvendorprefix=/usr/share/perl
 
 =item otherlibdirs
 
@@ -932,7 +936,7 @@ much, much more slowly than a standard perl.
 
 =head2 DTrace support
 
-On platforms where DTrace is available, it may be enabled by 
+On platforms where DTrace is available, it may be enabled by
 using the -Dusedtrace option to Configure. DTrace probes are available for
 subroutine entry (sub-entry) and subroutine exit (sub-exit). Here's a
 simple D script that uses them:
@@ -1039,10 +1043,11 @@ BerkeleyDB shared libraries.
 It is possible to specify this from the command line (all on one
 line):
 
-    sh Configure -de \
-        -Dlocincpth='/usr/local/BerkeleyDB.4.7/include /usr/local/include' \
-        -Dloclibpth='/usr/local/BerkeleyDB.4.7/lib /usr/local/lib' \
-        -Aldflags='-R/usr/local/BerkeleyDB.4.7/lib'
+ sh Configure -de \
+    -Dlocincpth='/usr/local/BerkeleyDB.4.7/include             \
+                                           /usr/local/include' \
+    -Dloclibpth='/usr/local/BerkeleyDB.4.7/lib /usr/local/lib' \
+    -Aldflags='-R/usr/local/BerkeleyDB.4.7/lib'
 
 locincpth is a space-separated list of include directories to search.
 Configure will automatically add the appropriate -I directives.
@@ -2095,11 +2100,13 @@ make install will install the following:
 
     scripts
 
-       cppstdin        This is used by the deprecated switch perl -P, if
-                       your cc -E can't read from stdin.
-       c2ph, pstruct   Scripts for handling C structures in header files.
+       cppstdin        This is used by the deprecated switch perl -P,
+                       if your cc -E can't read from stdin.
+       c2ph, pstruct   Scripts for handling C structures in header
+                        files.
        config_data     Manage Module::Build-like module configuration.
-       corelist        Shows versions of modules that come with different
+       corelist        Shows versions of modules that come with
+                        different
                        versions of perl.
        cpan            The CPAN shell.
        cpan2dist       The CPANPLUS distribution creator.
@@ -2107,7 +2114,8 @@ make install will install the following:
        cpanp-run-perl  A helper for cpanp.
        enc2xs          Encoding module generator.
        find2perl       find-to-perl translator.
-       h2ph            Extract constants and simple macros from C headers.
+       h2ph            Extract constants and simple macros from C
+                        headers.
        h2xs            Converts C .h header files to Perl extensions.
        instmodsh       A shell to examine installed modules.
        libnetcfg       Configure libnet.
@@ -2133,7 +2141,7 @@ make install will install the following:
        shasum          A tool to print or check SHA checksums.
        splain          Describe Perl warnings and errors.
        xsubpp          Compiler to convert Perl XS code into C code.
-       zipdetails              display the internal structure of zip files
+       zipdetails      display the internal structure of zip files
 
     library files
 
@@ -2544,7 +2552,8 @@ need to run a Perl program is
 it's a minimal set) and if you want to find out all the files you can
 use something like the below
 
-   strace perl -le 'do "x.pl"' 2>&1 | perl -nle '/^open\(\"(.+?)"/ && print $1'
+ strace perl -le 'do "x.pl"' 2>&1 \
+                             | perl -nle '/^open\(\"(.+?)"/ && print $1'
 
 (The 'strace' is Linux-specific, other similar utilities include 'truss'
 and 'ktrace'.)

diff --git a/t/porting/known_pod_issues.dat b/t/porting/known_pod_issues.dat
index fbf3582..c0879b7 100644 (file)
--- a/t/porting/known_pod_issues.dat
+++ b/t/porting/known_pod_issues.dat
@@ -202,7 +202,6 @@ ext/vms-dclsym/dclsym.pm    Verbatim line length including indents exceeds 79 by    1
 ext/vms-stdio/stdio.pm Verbatim line length including indents exceeds 79 by    1
 ext/xs-apitest/apitest.pm      Verbatim line length including indents exceeds 79 by    1
 install        ? Should you be using F<...> or maybe L<...> instead of 1
-install        Verbatim line length including indents exceeds 79 by    11
 installhtml    Verbatim line length including indents exceeds 79 by    3
 os2/os2/os2-extattr/extattr.pm ? Should you be using F<...> or maybe L<...> instead of 1
 os2/os2/os2-process/process.pm Verbatim line length including indents exceeds 79 by    27