ARM: at91: dts: sama5d3: change name of pinctrl_isi_{power,reset}
authorJosh Wu <josh.wu@atmel.com>
Sun, 4 Jan 2015 09:02:30 +0000 (17:02 +0800)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Thu, 15 Jan 2015 15:14:01 +0000 (16:14 +0100)
For sama5d3xmb board, the pins: pinctrl_isi_{power,reset} is used to
power-down or reset camera sensor.
So we should let camera sensor instead of ISI to configure the pins.

This patch will change pinctrl name from pinctrl_isi_{power,reset} to
pinctrl_sensor_{power,reset}. And remove these two pinctrl from ISI's
DT node. We will add these two pinctrl to sensor's DT node.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
arch/arm/boot/dts/sama5d3xmb.dtsi

index 6af1cba..db47f8b 100644 (file)
@@ -61,7 +61,7 @@
 
                        isi: isi@f0034000 {
                                pinctrl-names = "default";
-                               pinctrl-0 = <&pinctrl_isi_data_0_7 &pinctrl_isi_pck_as_mck &pinctrl_isi_power &pinctrl_isi_reset>;
+                               pinctrl-0 = <&pinctrl_isi_data_0_7 &pinctrl_isi_pck_as_mck>;
                        };
 
                        mmc1: mmc@f8000000 {
                                                        <AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD31 periph B ISI_MCK */
                                        };
 
-                                       pinctrl_isi_reset: isi_reset-0 {
+                                       pinctrl_sensor_reset: sensor_reset-0 {
                                                atmel,pins =
                                                        <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;   /* PE24 gpio */
                                        };
 
-                                       pinctrl_isi_power: isi_power-0 {
+                                       pinctrl_sensor_power: sensor_power-0 {
                                                atmel,pins =
                                                        <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
                                        };