Minor cleanup.

diff --git a/CHANGELOG b/CHANGELOG
index 494d0b0..a0b6f05 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Minor cleanup.
+
 * Update yosemite configuration to enable flash write buffer support
   Patch by Stefan Roese, 10 May 2006
 

diff --git a/board/m5271evb/m5271evb.c b/board/m5271evb/m5271evb.c
index d364bd6..c26c91d 100644 (file)
--- a/board/m5271evb/m5271evb.c
+++ b/board/m5271evb/m5271evb.c
@@ -53,10 +53,9 @@ long int initdram (int board_type) {
         * Check to see if the SDRAM has already been initialized
         * by a run control tool
         */
-       if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE))
-       {
+       if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) {
                /* Initialize DRAM Control Register: DCR */
-               mbar_writeShort(MCF_SDRAMC_DCR, 
+               mbar_writeShort(MCF_SDRAMC_DCR,
                                MCF_SDRAMC_DCR_RTIM(0x01)
                                | MCF_SDRAMC_DCR_RC(0x30));
 
@@ -74,7 +73,7 @@ long int initdram (int board_type) {
                                | MCF_SDRAMC_DACRn_PS(0));
 
                /* Initialize DMR0 */
-               mbar_writeLong(MCF_SDRAMC_DMR0, 
+               mbar_writeLong(MCF_SDRAMC_DMR0,
                                MCF_SDRAMC_DMRn_BAM_16M
                                | MCF_SDRAMC_DMRn_V);
 

diff --git a/board/r5200/r5200.c b/board/r5200/r5200.c
index e51ad25..69f3a76 100644 (file)
--- a/board/r5200/r5200.c
+++ b/board/r5200/r5200.c
@@ -47,8 +47,7 @@ long int initdram (int board_type) {
         * Check to see if the SDRAM has already been initialized
         * by a run control tool
         */
-       if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE))
-       {
+       if (!(mbar_readLong(MCF_SDRAMC_DACR0) & MCF_SDRAMC_DACRn_RE)) {
                /*
                 * Initialize DRAM Control Register: DCR
                 */
@@ -67,7 +66,7 @@ long int initdram (int board_type) {
                /*
                 * Initialize DMR0
                 */
-               mbar_writeLong(MCF_SDRAMC_DMR0, 
+               mbar_writeLong(MCF_SDRAMC_DMR0,
                                MCF_SDRAMC_DMRn_BAM_8M
                                | MCF_SDRAMC_DMRn_V);
 

diff --git a/cpu/arm926ejs/cpuinfo.c b/cpu/arm926ejs/cpuinfo.c
index 410a235..8c98631 100644 (file)
--- a/cpu/arm926ejs/cpuinfo.c
+++ b/cpu/arm926ejs/cpuinfo.c
@@ -242,4 +242,3 @@ int print_cpuinfo (void)
 }
 
 #endif /* #if defined(CONFIG_DISPLAY_CPUINFO) && defined(CONFIG_OMAP) */
-

diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index d33adc2..451e3f3 100644 (file)
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -12,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -58,9 +58,9 @@ void cpu_init_f (void)
 
        /* Enable UART pins */
        mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD |
-                        MCF_GPIO_PAR_UART_U0RXD |
-                        MCF_GPIO_PAR_UART_U1RXD_UART1 |
-                        MCF_GPIO_PAR_UART_U1TXD_UART1);
+                       MCF_GPIO_PAR_UART_U0RXD |
+                       MCF_GPIO_PAR_UART_U1RXD_UART1 |
+                       MCF_GPIO_PAR_UART_U1TXD_UART1);
 
        /* Enable Ethernet pins */
        mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C);
@@ -69,7 +69,7 @@ void cpu_init_f (void)
 /*
  * initialize higher level parts of CPU like timers
  */
-int cpu_init_r  (void)
+int cpu_init_r (void)
 {
        return (0);
 }
@@ -97,7 +97,7 @@ void cpu_init_f (void)
        regp->sysctrl_reg.sc_scr = CFG_SCR;
        regp->sysctrl_reg.sc_spr = CFG_SPR;
 
-       /* Setup Ports: */
+       /* Setup Ports: */
        regp->gpio_reg.gpio_pacnt = CFG_PACNT;
        regp->gpio_reg.gpio_paddr = CFG_PADDR;
        regp->gpio_reg.gpio_padat = CFG_PADAT;
@@ -147,15 +147,15 @@ void cpu_init_f (void)
 
 #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */
 
-    /* enable instruction cache now */
-    icache_enable();
+       /* enable instruction cache now */
+       icache_enable();
 
 }
 
 /*
  * initialize higher level parts of CPU like timers
  */
-int cpu_init_r  (void)
+int cpu_init_r (void)
 {
        return (0);
 }
@@ -178,7 +178,7 @@ void cpu_init_f (void)
 /*
  * initialize higher level parts of CPU like timers
  */
-int cpu_init_r  (void)
+int cpu_init_r (void)
 {
        return (0);
 }
@@ -202,23 +202,23 @@ void cpu_init_f (void)
        volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR);
        unsigned long pllcr;
 #ifdef CFG_FAST_CLK
-       pllcr = 0x925a3100;                       /* ~140MHz clock (PLL bypass = 0) */
+       pllcr = 0x925a3100;                       /* ~140MHz clock (PLL bypass = 0) */
 #else
-       pllcr = 0x135a4140;                       /* ~72MHz clock (PLL bypass = 0) */
+       pllcr = 0x135a4140;                       /* ~72MHz clock (PLL bypass = 0) */
 #endif
-       cpll = cpll & 0xfffffffe;                 /* Set PLL bypass mode = 0 (PSTCLK = crystal) */
-       mbar2_writeLong(MCFSIM_PLLCR, cpll);      /* Set the PLL to bypass mode (PSTCLK = crystal) */
-       mbar2_writeLong(MCFSIM_PLLCR, pllcr);     /* set the clock speed */
-       pllcr ^= 0x00000001;                      /* Set pll bypass to 1 */
-       mbar2_writeLong(MCFSIM_PLLCR, pllcr);     /* Start locking (pll bypass = 1) */
-       udelay(0x20);                             /* Wait for a lock ... */
+       cpll = cpll & 0xfffffffe;                 /* Set PLL bypass mode = 0 (PSTCLK = crystal) */
+       mbar2_writeLong(MCFSIM_PLLCR, cpll);      /* Set the PLL to bypass mode (PSTCLK = crystal) */
+       mbar2_writeLong(MCFSIM_PLLCR, pllcr);     /* set the clock speed */
+       pllcr ^= 0x00000001;                      /* Set pll bypass to 1 */
+       mbar2_writeLong(MCFSIM_PLLCR, pllcr);     /* Start locking (pll bypass = 1) */
+       udelay(0x20);                             /* Wait for a lock ... */
 #endif /* #ifndef CFG_PLL_BYPASS */
 
        /*
         *  NOTE: by setting the GPIO_FUNCTION registers, we ensure that the UART pins
-        *        (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins
-        *        which is their primary function.
-        *        ~Jeremy
+        *        (UART0: gpio 30,27, UART1: gpio 31, 28) will be used as UART pins
+        *        which is their primary function.
+        *        ~Jeremy
         */
        mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC);
        mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC);
@@ -233,7 +233,7 @@ void cpu_init_f (void)
         *    (Internal Register Display) command
         *    ~Jeremy
         *
-        */
+        */
        mbar_writeByte(MCFSIM_MPARK, 0x30);    /* 5249 Internal Core takes priority over DMA */
        mbar_writeByte(MCFSIM_SYPCR, 0x00);
        mbar_writeByte(MCFSIM_SWIVR, 0x0f);
@@ -252,9 +252,9 @@ void cpu_init_f (void)
        mbar_writeByte(MCFSIM_QSPIICR, 0x00);
 
        mbar2_writeLong(MCFSIM_GPIO_INT_EN, 0x00000080);
-       mbar2_writeByte(MCFSIM_INTBASE, 0x40);  /* Base interrupts at 64 */
+       mbar2_writeByte(MCFSIM_INTBASE, 0x40);  /* Base interrupts at 64 */
        mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
-       mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020);  /* Enable a 1 cycle pre-drive cycle on CS1 */
+       mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020);  /* Enable a 1 cycle pre-drive cycle on CS1 */
 
        /* Setup interrupt priorities for gpio7 */
        /* mbar2_writeLong(MCFSIM_INTLEV5, 0x70000000); */
@@ -282,7 +282,7 @@ void cpu_init_f (void)
 /*
  * initialize higher level parts of CPU like timers
  */
-int cpu_init_r  (void)
+int cpu_init_r (void)
 {
        return (0);
 }

diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
index c66bdef..1011788 100644 (file)
--- a/cpu/mcf52x2/serial.c
+++ b/cpu/mcf52x2/serial.c
@@ -106,7 +106,7 @@ void rs_serial_init(int port,int baudrate)
 
        /* Set clock Select Register: Tx/Rx clock is timer */
        uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
-       
+
        rs_serial_setbaudrate(port,baudrate);
 
        /* Enable Tx/Rx */

diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index 0300b0d..66f1646 100644 (file)
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -39,7 +39,7 @@
 #define CONFIG_MPC8349         1       /* MPC8349 specific */
 #define CONFIG_MPC8349EMDS     1       /* MPC8349EMDS board specific */
 
-#undef CONFIG_PCI              
+#undef CONFIG_PCI
 #undef CONFIG_MPC83XX_PCI2             /* support for 2nd PCI controller */
 
 #define PCI_66M

diff --git a/include/configs/r5200.h b/include/configs/r5200.h
index 7049704..e1e406b 100644 (file)
--- a/include/configs/r5200.h
+++ b/include/configs/r5200.h
@@ -72,7 +72,7 @@
 #include <cmd_confdefs.h>
 
 /* Note: We only copy one sectors worth of application code from location
- * 10200000 for speed purposes.  Increase the size if necessary */ 
+ * 10200000 for speed purposes.  Increase the size if necessary */
 #define CONFIG_BOOTCOMMAND     "cp.b 10200000 0 20000; go 400"
 #define        CONFIG_BOOTDELAY        1
 

diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 73d2e3f..6aaf609 100644 (file)
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -363,7 +363,7 @@ board_init_f (ulong bootflag)
        *paddr-- = 0;
        *paddr-- = 0;
        addr_sp = (ulong)paddr;
-       
+
        debug ("Stack Pointer at: %08lx\n", addr_sp);
 
        /*