[BNX2]: Add remote PHY bit definitions.

Add new fields in struct bnx2 and other bit definitions in shared
memory to support remote PHY.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 49a5de2..14c0a1e 100644 (file)
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6537,6 +6537,7 @@ struct bnx2 {
 #define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100
 #define PHY_INT_MODE_LINK_READY_FLAG   0x200
 #define PHY_DIS_EARLY_DAC_FLAG         0x400
+#define REMOTE_PHY_CAP_FLAG            0x800
 
        u32                     mii_bmcr;
        u32                     mii_bmsr;
@@ -6625,6 +6626,7 @@ struct bnx2 {
        u16                     req_line_speed;
        u8                      req_duplex;
 
+       u8                      phy_port;
        u8                      link_up;
 
        u16                     line_speed;
@@ -6770,7 +6772,7 @@ struct fw_info {
  * the firmware has timed out, the driver will assume there is no firmware
  * running and there won't be any firmware-driver synchronization during a
  * driver reset. */
-#define FW_ACK_TIME_OUT_MS                  100
+#define FW_ACK_TIME_OUT_MS                  1000
 
 
 #define BNX2_DRV_RESET_SIGNATURE               0x00000000
@@ -6788,6 +6790,7 @@ struct fw_info {
 #define BNX2_DRV_MSG_CODE_DIAG                  0x07000000
 #define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL        0x09000000
 #define BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN                 0x0b000000
+#define BNX2_DRV_MSG_CODE_CMD_SET_LINK          0x10000000
 
 #define BNX2_DRV_MSG_DATA                       0x00ff0000
 #define BNX2_DRV_MSG_DATA_WAIT0                         0x00010000
@@ -6845,6 +6848,30 @@ struct fw_info {
  * This is used for debugging. */
 #define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE       0x00080000
 
+#define BNX2_DRV_MB_ARG0                       0x00000014
+#define BNX2_NETLINK_SET_LINK_SPEED_10HALF      (1<<0)
+#define BNX2_NETLINK_SET_LINK_SPEED_10FULL      (1<<1)
+#define BNX2_NETLINK_SET_LINK_SPEED_10          \
+       (BNX2_NETLINK_SET_LINK_SPEED_10HALF |    \
+        BNX2_NETLINK_SET_LINK_SPEED_10FULL)
+#define BNX2_NETLINK_SET_LINK_SPEED_100HALF     (1<<2)
+#define BNX2_NETLINK_SET_LINK_SPEED_100FULL     (1<<3)
+#define BNX2_NETLINK_SET_LINK_SPEED_100                 \
+       (BNX2_NETLINK_SET_LINK_SPEED_100HALF |   \
+        BNX2_NETLINK_SET_LINK_SPEED_100FULL)
+#define BNX2_NETLINK_SET_LINK_SPEED_1GHALF      (1<<4)
+#define BNX2_NETLINK_SET_LINK_SPEED_1GFULL      (1<<5)
+#define BNX2_NETLINK_SET_LINK_SPEED_2G5HALF     (1<<6)
+#define BNX2_NETLINK_SET_LINK_SPEED_2G5FULL     (1<<7)
+#define BNX2_NETLINK_SET_LINK_SPEED_10GHALF     (1<<8)
+#define BNX2_NETLINK_SET_LINK_SPEED_10GFULL     (1<<9)
+#define BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG    (1<<10)
+#define BNX2_NETLINK_SET_LINK_PHY_APP_REMOTE    (1<<11)
+#define BNX2_NETLINK_SET_LINK_FC_SYM_PAUSE      (1<<12)
+#define BNX2_NETLINK_SET_LINK_FC_ASYM_PAUSE     (1<<13)
+#define BNX2_NETLINK_SET_LINK_ETH_AT_WIRESPEED  (1<<14)
+#define BNX2_NETLINK_SET_LINK_PHY_RESET                 (1<<15)
+
 #define BNX2_DEV_INFO_SIGNATURE                        0x00000020
 #define BNX2_DEV_INFO_SIGNATURE_MAGIC           0x44564900
 #define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK      0xffffff00
@@ -7065,6 +7092,28 @@ struct fw_info {
 #define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK  0xffff
 #define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE  0xffff
 
+#define BNX2_FW_EVT_CODE_MB                    0x354
+#define BNX2_FW_EVT_CODE_SW_TIMER_EXPIRATION_EVENT 0x00000000
+#define BNX2_FW_EVT_CODE_LINK_EVENT             0x00000001
+
+#define BNX2_DRV_ACK_CAP_MB                    0x364
+#define BNX2_DRV_ACK_CAP_SIGNATURE              0x35450000
+#define BNX2_CAPABILITY_SIGNATURE_MASK          0xFFFF0000
+
+#define BNX2_FW_CAP_MB                         0x368
+#define BNX2_FW_CAP_SIGNATURE                   0xaa550000
+#define BNX2_FW_ACK_DRV_SIGNATURE               0x52500000
+#define BNX2_FW_CAP_SIGNATURE_MASK              0xffff0000
+#define BNX2_FW_CAP_REMOTE_PHY_CAPABLE          0x00000001
+#define BNX2_FW_CAP_REMOTE_PHY_PRESENT          0x00000002
+
+#define BNX2_RPHY_SIGNATURE                    0x36c
+#define BNX2_RPHY_LOAD_SIGNATURE                0x5a5a5a5a
+
+#define BNX2_RPHY_FLAGS                                0x370
+#define BNX2_RPHY_SERDES_LINK                  0x374
+#define BNX2_RPHY_COPPER_LINK                  0x378
+
 #define HOST_VIEW_SHMEM_BASE                   0x167c00
 
 #endif