arm64: dts: rockchip: add reg property to brcmf sub-nodes
authorJohan Jonker <jbx6244@gmail.com>
Fri, 10 Jan 2020 14:21:28 +0000 (15:21 +0100)
committerHeiko Stuebner <heiko@sntech.de>
Mon, 13 Jan 2020 09:21:38 +0000 (10:21 +0100)
An experimental test with the command below gives this error:
rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts

index 7584351..d63faf3 100644 (file)
        vqmmc-supply = &vcc1v8_s3;      /* IO line */
        vmmc-supply = &vcc_sdio;        /* card's power */
 
+       #address-cells = <1>;
+       #size-cells = <0>;
        status = "okay";
 
        brcmf: wifi@1 {
+               reg = <1>;
                compatible = "brcm,bcm4329-fmac";
                interrupt-parent = <&gpio0>;
                interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
index 4944d78..e87a044 100644 (file)
        sd-uhs-sdr104;
        vqmmc-supply = <&vcc1v8_s3>;
        vmmc-supply = <&vccio_sd>;
+       #address-cells = <1>;
+       #size-cells = <0>;
        status = "okay";
 
        brcmf: wifi@1 {
+               reg = <1>;
                compatible = "brcm,bcm4329-fmac";
                interrupt-parent = <&gpio0>;
                interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
index 0541dfc..9c659f3 100644 (file)
        pinctrl-names = "default";
        pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
        sd-uhs-sdr104;
+       #address-cells = <1>;
+       #size-cells = <0>;
        status = "okay";
 
        brcmf: wifi@1 {
+               reg = <1>;
                compatible = "brcm,bcm4329-fmac";
                interrupt-parent = <&gpio0>;
                interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;