[media] dvb_usb_v2: rework USB streaming logic
authorAntti Palosaari <crope@iki.fi>
Sat, 9 Mar 2013 19:10:55 +0000 (16:10 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Sat, 23 Mar 2013 13:02:04 +0000 (10:02 -0300)
Control flow order changed a little bit. HW PID filter is now
disabled also when streaming is stopped - earlier it was just
set only when streaming was started.
Control flow is now:
* set streaming status bit
* submit USB streaming packets
* enable HW PID filter
* ask device to start streaming
* N x add PID to device HW PID filter
... streaming video ...
* N x remove PID from device HW PID filter
* ask device to stop streaming
* disable HW PID filter
* kill USB streaming packets
* clear streaming status bit

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/usb/dvb-usb-v2/dvb_usb_core.c

index 9b24a0e..19f6737 100644 (file)
@@ -260,135 +260,152 @@ static int wait_schedule(void *ptr)
        return 0;
 }
 
-static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed,
-               int count)
+static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
 {
        struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv;
        struct dvb_usb_device *d = adap_to_d(adap);
-       int ret;
-       dev_dbg(&d->udev->dev, "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d '%s'\n",
+       int ret = 0;
+       struct usb_data_stream_properties stream_props;
+       dev_dbg(&d->udev->dev,
+                       "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n",
                        __func__, adap->id, adap->active_fe, dvbdmxfeed->type,
                        adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid,
-                       dvbdmxfeed->pid, dvbdmxfeed->index,
-                       (count == 1) ? "on" : "off");
+                       dvbdmxfeed->pid, dvbdmxfeed->index);
 
+       /* wait init is done */
        wait_on_bit(&adap->state_bits, ADAP_INIT, wait_schedule,
                        TASK_UNINTERRUPTIBLE);
 
        if (adap->active_fe == -1)
                return -EINVAL;
 
-       adap->feed_count += count;
-
-       /* stop feeding if it is last pid */
-       if (adap->feed_count == 0) {
-               dev_dbg(&d->udev->dev, "%s: stop feeding\n", __func__);
-
-               if (d->props->streaming_ctrl) {
-                       ret = d->props->streaming_ctrl(
-                                       adap->fe[adap->active_fe], 0);
-                       if (ret < 0) {
-                               dev_err(&d->udev->dev,
-                                               "%s: streaming_ctrl() failed=%d\n",
-                                               KBUILD_MODNAME, ret);
-                               usb_urb_killv2(&adap->stream);
-                               goto err_clear_wait;
-                       }
-               }
-               usb_urb_killv2(&adap->stream);
+       /* skip feed setup if we are already feeding */
+       if (adap->feed_count++ > 0)
+               goto skip_feed_start;
 
-               clear_bit(ADAP_STREAMING, &adap->state_bits);
-               smp_mb__after_clear_bit();
-               wake_up_bit(&adap->state_bits, ADAP_STREAMING);
+       /* set 'streaming' status bit */
+       set_bit(ADAP_STREAMING, &adap->state_bits);
+
+       /* resolve input and output streaming parameters */
+       if (d->props->get_stream_config) {
+               memcpy(&stream_props, &adap->props->stream,
+                               sizeof(struct usb_data_stream_properties));
+               ret = d->props->get_stream_config(adap->fe[adap->active_fe],
+                               &adap->ts_type, &stream_props);
+               if (ret)
+                       dev_err(&d->udev->dev,
+                                       "%s: get_stream_config() failed=%d\n",
+                                       KBUILD_MODNAME, ret);
+       } else {
+               stream_props = adap->props->stream;
+       }
+
+       switch (adap->ts_type) {
+       case DVB_USB_FE_TS_TYPE_204:
+               adap->stream.complete = dvb_usb_data_complete_204;
+               break;
+       case DVB_USB_FE_TS_TYPE_RAW:
+               adap->stream.complete = dvb_usb_data_complete_raw;
+               break;
+       case DVB_USB_FE_TS_TYPE_188:
+       default:
+               adap->stream.complete = dvb_usb_data_complete;
+               break;
+       }
+
+       /* submit USB streaming packets */
+       usb_urb_submitv2(&adap->stream, &stream_props);
+
+       /* enable HW PID filter */
+       if (adap->pid_filtering && adap->props->pid_filter_ctrl) {
+               ret = adap->props->pid_filter_ctrl(adap, 1);
+               if (ret)
+                       dev_err(&d->udev->dev,
+                                       "%s: pid_filter_ctrl() failed=%d\n",
+                                       KBUILD_MODNAME, ret);
        }
 
-       /* activate the pid on the device pid filter */
-       if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER &&
-                       adap->pid_filtering && adap->props->pid_filter) {
+       /* ask device to start streaming */
+       if (d->props->streaming_ctrl) {
+               ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 1);
+               if (ret)
+                       dev_err(&d->udev->dev,
+                                       "%s: streaming_ctrl() failed=%d\n",
+                                       KBUILD_MODNAME, ret);
+       }
+skip_feed_start:
+
+       /* add PID to device HW PID filter */
+       if (adap->pid_filtering && adap->props->pid_filter) {
                ret = adap->props->pid_filter(adap, dvbdmxfeed->index,
-                               dvbdmxfeed->pid, (count == 1) ? 1 : 0);
-               if (ret < 0)
+                               dvbdmxfeed->pid, 1);
+               if (ret)
                        dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n",
                                        KBUILD_MODNAME, ret);
        }
 
-       /* start feeding if it is first pid */
-       if (adap->feed_count == 1 && count == 1) {
-               struct usb_data_stream_properties stream_props;
-               set_bit(ADAP_STREAMING, &adap->state_bits);
-               dev_dbg(&d->udev->dev, "%s: start feeding\n", __func__);
+       if (ret)
+               dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+       return ret;
+}
 
-               /* resolve input and output streaming paramters */
-               if (d->props->get_stream_config) {
-                       memcpy(&stream_props, &adap->props->stream,
-                               sizeof(struct usb_data_stream_properties));
-                       ret = d->props->get_stream_config(
-                                       adap->fe[adap->active_fe],
-                                       &adap->ts_type, &stream_props);
-                       if (ret < 0)
-                               goto err_clear_wait;
-               } else {
-                       stream_props = adap->props->stream;
-               }
+static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
+{
+       struct dvb_usb_adapter *adap = dvbdmxfeed->demux->priv;
+       struct dvb_usb_device *d = adap_to_d(adap);
+       int ret = 0;
+       dev_dbg(&d->udev->dev,
+                       "%s: adap=%d active_fe=%d feed_type=%d setting pid [%s]: %04x (%04d) at index %d\n",
+                       __func__, adap->id, adap->active_fe, dvbdmxfeed->type,
+                       adap->pid_filtering ? "yes" : "no", dvbdmxfeed->pid,
+                       dvbdmxfeed->pid, dvbdmxfeed->index);
 
-               switch (adap->ts_type) {
-               case DVB_USB_FE_TS_TYPE_204:
-                       adap->stream.complete = dvb_usb_data_complete_204;
-                       break;
-               case DVB_USB_FE_TS_TYPE_RAW:
-                       adap->stream.complete = dvb_usb_data_complete_raw;
-                       break;
-               case DVB_USB_FE_TS_TYPE_188:
-               default:
-                       adap->stream.complete = dvb_usb_data_complete;
-                       break;
-               }
+       if (adap->active_fe == -1)
+               return -EINVAL;
 
-               usb_urb_submitv2(&adap->stream, &stream_props);
-
-               if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER &&
-                               adap->props->caps &
-                               DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF &&
-                               adap->props->pid_filter_ctrl) {
-                       ret = adap->props->pid_filter_ctrl(adap,
-                                       adap->pid_filtering);
-                       if (ret < 0) {
-                               dev_err(&d->udev->dev,
-                                               "%s: pid_filter_ctrl() failed=%d\n",
-                                               KBUILD_MODNAME, ret);
-                               goto err_clear_wait;
-                       }
-               }
+       /* remove PID from device HW PID filter */
+       if (adap->pid_filtering && adap->props->pid_filter) {
+               ret = adap->props->pid_filter(adap, dvbdmxfeed->index,
+                               dvbdmxfeed->pid, 0);
+               if (ret)
+                       dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n",
+                                       KBUILD_MODNAME, ret);
+       }
 
-               if (d->props->streaming_ctrl) {
-                       ret = d->props->streaming_ctrl(
-                                       adap->fe[adap->active_fe], 1);
-                       if (ret < 0) {
-                               dev_err(&d->udev->dev,
-                                               "%s: streaming_ctrl() failed=%d\n",
-                                               KBUILD_MODNAME, ret);
-                               goto err_clear_wait;
-                       }
-               }
+       /* we cannot stop streaming until last PID is removed */
+       if (--adap->feed_count > 0)
+               goto skip_feed_stop;
+
+       /* ask device to stop streaming */
+       if (d->props->streaming_ctrl) {
+               ret = d->props->streaming_ctrl(adap->fe[adap->active_fe], 0);
+               if (ret)
+                       dev_err(&d->udev->dev,
+                                       "%s: streaming_ctrl() failed=%d\n",
+                                       KBUILD_MODNAME, ret);
        }
 
-       return 0;
-err_clear_wait:
+       /* disable HW PID filter */
+       if (adap->pid_filtering && adap->props->pid_filter_ctrl) {
+               ret = adap->props->pid_filter_ctrl(adap, 0);
+               if (ret)
+                       dev_err(&d->udev->dev,
+                                       "%s: pid_filter_ctrl() failed=%d\n",
+                                       KBUILD_MODNAME, ret);
+       }
+
+       /* kill USB streaming packets */
+       usb_urb_killv2(&adap->stream);
+
+       /* clear 'streaming' status bit */
        clear_bit(ADAP_STREAMING, &adap->state_bits);
        smp_mb__after_clear_bit();
        wake_up_bit(&adap->state_bits, ADAP_STREAMING);
-       dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
-       return ret;
-}
-
-static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-       return dvb_usb_ctrl_feed(dvbdmxfeed, 1);
-}
+skip_feed_stop:
 
-static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
-{
-       return dvb_usb_ctrl_feed(dvbdmxfeed, -1);
+       if (ret)
+               dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
+       return ret;
 }
 
 static int dvb_usbv2_adapter_dvb_init(struct dvb_usb_adapter *adap)