riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
authorSamuel Holland <samuel@sholland.org>
Thu, 26 Jan 2023 04:57:35 +0000 (22:57 -0600)
committerJernej Skrabec <jernej.skrabec@gmail.com>
Fri, 27 Jan 2023 22:01:32 +0000 (23:01 +0100)
The MangoPi MQ Pro is a tiny SBC with a layout compatible to the
Raspberry Pi Zero. It includes the Allwinner D1 SoC, 512M or 1G of DDR3,
and an RTL8723DS-based WiFi/Bluetooth module.

The board also exposes GPIO Port E via a connector on the end of the
board, which can support either a camera or an RMII Ethernet PHY. The
additional regulators supply that connector.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-9-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
arch/riscv/boot/dts/allwinner/Makefile
arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts [new file with mode: 0644]

index f1c70b9..2ed586f 100644 (file)
@@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-mangopi-mq-pro.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
new file mode 100644 (file)
index 0000000..f2e0704
--- /dev/null
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+       model = "MangoPi MQ Pro";
+       compatible = "widora,mangopi-mq-pro", "allwinner,sun20i-d1";
+
+       aliases {
+               ethernet0 = &rtl8723ds;
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       color = <LED_COLOR_ID_BLUE>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
+               };
+       };
+
+       reg_avdd2v8: avdd2v8 {
+               compatible = "regulator-fixed";
+               regulator-name = "avdd2v8";
+               regulator-min-microvolt = <2800000>;
+               regulator-max-microvolt = <2800000>;
+               vin-supply = <&reg_vcc_3v3>;
+       };
+
+       reg_dvdd: dvdd {
+               compatible = "regulator-fixed";
+               regulator-name = "dvdd";
+               regulator-min-microvolt = <1200000>;
+               regulator-max-microvolt = <1200000>;
+               vin-supply = <&reg_vcc_3v3>;
+       };
+
+       reg_vdd_cpu: vdd-cpu {
+               compatible = "regulator-fixed";
+               regulator-name = "vdd-cpu";
+               regulator-min-microvolt = <1100000>;
+               regulator-max-microvolt = <1100000>;
+               vin-supply = <&reg_vcc>;
+       };
+
+       wifi_pwrseq: wifi-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               reset-gpios = <&pio 6 17 GPIO_ACTIVE_LOW>; /* PG17 */
+       };
+};
+
+&cpu0 {
+       cpu-supply = <&reg_vdd_cpu>;
+};
+
+&dcxo {
+       clock-frequency = <24000000>;
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&mmc0 {
+       bus-width = <4>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+       disable-wp;
+       vmmc-supply = <&reg_vcc_3v3>;
+       vqmmc-supply = <&reg_vcc_3v3>;
+       pinctrl-0 = <&mmc0_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&mmc1 {
+       bus-width = <4>;
+       mmc-pwrseq = <&wifi_pwrseq>;
+       non-removable;
+       vmmc-supply = <&reg_vcc_3v3>;
+       vqmmc-supply = <&reg_vcc_3v3>;
+       pinctrl-0 = <&mmc1_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       rtl8723ds: wifi@1 {
+               reg = <1>;
+               interrupt-parent = <&pio>;
+               interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+               interrupt-names = "host-wake";
+       };
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&pio {
+       vcc-pe-supply = <&reg_avdd2v8>;
+};
+
+&uart0 {
+       pinctrl-0 = <&uart0_pb8_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&uart1 {
+       uart-has-rtscts;
+       pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+
+       bluetooth {
+               compatible = "realtek,rtl8723ds-bt";
+               device-wake-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
+               enable-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG15 */
+               host-wake-gpios = <&pio 6 14 GPIO_ACTIVE_HIGH>; /* PG14 */
+       };
+};
+
+&usb_otg {
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
+&usbphy {
+       usb1_vbus-supply = <&reg_vcc>;
+       status = "okay";
+};