Convert uart_handle_cts_change() to bool which is more appropriate
than unsigned int.
Rename status to active to better describe what the parameter means.
While at it, make the comment about the active parameter easier to
parse.
Cleanup callsites from operations that are not necessary with bool.
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230117090358.4796-10-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
imx_uart_writel(sport, USR1_RTSD, USR1);
usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS;
- uart_handle_cts_change(&sport->port, !!usr1);
+ uart_handle_cts_change(&sport->port, usr1);
wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
return IRQ_HANDLED;
cts = (rx & MAX3100_CTS) > 0;
if (s->cts != cts) {
s->cts = cts;
- uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0);
+ uart_handle_cts_change(&s->port, cts);
}
return ret;
if (ists & MAX310X_IRQ_CTS_BIT) {
lsr = max310x_port_read(port, MAX310X_LSR_IRQSTS_REG);
- uart_handle_cts_change(port,
- !!(lsr & MAX310X_LSR_CTS_BIT));
+ uart_handle_cts_change(port, lsr & MAX310X_LSR_CTS_BIT);
}
if (rxlen)
max310x_handle_rx(port, rxlen);
/**
* uart_handle_cts_change - handle a change of clear-to-send state
* @uport: uart_port structure for the open port
- * @status: new clear to send status, nonzero if active
+ * @active: new clear-to-send status
*
* Caller must hold uport->lock.
*/
-void uart_handle_cts_change(struct uart_port *uport, unsigned int status)
+void uart_handle_cts_change(struct uart_port *uport, bool active)
{
lockdep_assert_held_once(&uport->lock);
if (uart_softcts_mode(uport)) {
if (uport->hw_stopped) {
- if (status) {
+ if (active) {
uport->hw_stopped = 0;
uport->ops->start_tx(uport);
uart_write_wakeup(uport);
}
} else {
- if (!status) {
+ if (!active) {
uport->hw_stopped = 1;
uport->ops->stop_tx(uport);
}
*/
extern void uart_handle_dcd_change(struct uart_port *uport, bool active);
-extern void uart_handle_cts_change(struct uart_port *uport,
- unsigned int status);
+extern void uart_handle_cts_change(struct uart_port *uport, bool active);
extern void uart_insert_char(struct uart_port *port, unsigned int status,
unsigned int overrun, unsigned int ch, unsigned int flag);