M: Julia Lawall <Julia.Lawall@lip6.fr>
M: Gilles Muller <Gilles.Muller@lip6.fr>
M: Nicolas Palix <nicolas.palix@imag.fr>
-M: Michal Marek <mmarek@suse.com>
+M: Michal Marek <michal.lkml@markovi.net>
L: cocci@systeme.lip6.fr (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild.git misc
W: http://coccinelle.lip6.fr/
F: scripts/Makefile.kasan
KCONFIG
-M: "Yann E. MORIN" <yann.morin.1998@free.fr>
L: linux-kbuild@vger.kernel.org
-T: git git://gitorious.org/linux-kconfig/linux-kconfig
-S: Maintained
+S: Orphan
F: Documentation/kbuild/kconfig-language.txt
F: scripts/kconfig/
KERNEL BUILD + files below scripts/ (unless maintained elsewhere)
M: Masahiro Yamada <yamada.masahiro@socionext.com>
-M: Michal Marek <mmarek@suse.com>
+M: Michal Marek <michal.lkml@markovi.net>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git
L: linux-kbuild@vger.kernel.org
S: Maintained
M: Bastien Nocera <hadess@hadess.net>
L: linux-input@vger.kernel.org
S: Maintained
-F: drivers/hid/hid-udraw.c
+F: drivers/hid/hid-udraw-ps3.c
UFS FILESYSTEM
M: Evgeniy Dushistov <dushistov@mail.ru>
Generic kernels will auto-detect QEMU. But when building a
system-specific kernel, the assumption is that we want to
- elimiate as many runtime tests as possible.
+ eliminate as many runtime tests as possible.
If unsure, say N.
config ARC_MMU_V2
bool "MMU v2"
help
- Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
+ Fixed the deficiency of v1 - possible thrashing in memcpy scenario
when 2 D-TLB and 1 I-TLB entries index into same 2way set.
config ARC_MMU_V3
bool "Enable FPU state persistence across context switch"
default n
help
- Double Precision Floating Point unit had dedictaed regs which
+ Double Precision Floating Point unit had dedicated regs which
need to be saved/restored across context-switch.
Note that ARC FPU is overly simplistic, unlike say x86, which has
hardware pieces to allow software to conditionally save/restore,
bool
config ARC_KVADDR_SIZE
- int "Kernel Virtaul Address Space size (MB)"
+ int "Kernel Virtual Address Space size (MB)"
range 0 512
default "256"
help
help
This enables support for systems based on Broadcom IPROC architected SoCs.
The IPROC complex contains one or more ARM CPUs along with common
- core periperals. Application specific SoCs are created by adding a
+ core peripherals. Application specific SoCs are created by adding a
uArchitecture containing peripherals outside of the IPROC complex.
Currently supported SoCs are Cygnus.
Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
This is a network SoC line mostly used in home routers and
- wifi access points, it's internal name is Northstar.
- This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+ wifi access points, its internal name is Northstar.
+ This includes the following SoC: BCM53010, BCM53011, BCM53012,
BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
BCM4708 and BCM4709.
help
Set the chunksize in Kilobytes of the CRC for checking memory
corruption over suspend and resume. A smaller value will mean that
- the CRC data block will take more memory, but wil identify any
+ the CRC data block will take more memory, but will identify any
faults with better precision.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
help
User Access Override (UAO; part of the ARMv8.2 Extensions)
causes the 'unprivileged' variant of the load/store instructions to
- be overriden to be privileged.
+ be overridden to be privileged.
This option changes get_user() and friends to use the 'unprivileged'
variant of the load/store instructions. This ensures that user-space
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_BRIDGE=y
-CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=y
CONFIG_IRDA=y
CONFIG_IRLAN=y
config PPC_SMP_MUXED_IPI
bool
help
- Select this opton if your platform supports SMP and your
+ Select this option if your platform supports SMP and your
interrupt controller provides less than 4 interrupts to each
cpu. This will enable the generic code to multiplex the 4
messages on to one ipi.
source "arch/unicore32/mm/Kconfig"
-comment "Floating poing support"
+comment "Floating point support"
config UNICORE_FPU_F64
def_bool y if !ARCH_FPGA
then enter your normal kernel breakpoints once the MMU was mapped
to the kernel mappings (0XC0000000).
- This unfortunately doesn't work for U-Boot and likley also wont
+ This unfortunately won't work for U-Boot and likely also wont
work for using KEXEC to have a hot kernel ready for doing a
KDUMP.
/* initialize with zero autocenter to get wheel in usable state */
hidpp_ff_set_autocenter(dev, 0);
- hid_info(hid, "Force feeback support loaded (firmware release %d).\n", version);
+ hid_info(hid, "Force feedback support loaded (firmware release %d).\n",
+ version);
return 0;
}
buffer = kmalloc(sizeof(struct event_buffer), GFP_KERNEL);
if (!buffer)
- return 1;
+ return -ENOMEM;
buffer->next_index = 0;
buffer->next_serial_number = 1;
snprintf(sp->dirname, IBMASM_NAME_SIZE, "%d", sp->number);
snprintf(sp->devname, IBMASM_NAME_SIZE, "%s%d", DRIVER_NAME, sp->number);
- if (ibmasm_event_buffer_init(sp)) {
+ result = ibmasm_event_buffer_init(sp);
+ if (result) {
dev_err(sp->dev, "Failed to allocate event buffer\n");
goto error_eventbuffer;
}
- if (ibmasm_heartbeat_init(sp)) {
+ result = ibmasm_heartbeat_init(sp);
+ if (result) {
dev_err(sp->dev, "Failed to allocate heartbeat command\n");
goto error_heartbeat;
}
Set this to y if you have an Ethernet network cards that uses the aQuantia
AQC107/AQC108 chipset.
- This option does not build any drivers; it casues the aQuantia
+ This option does not build any drivers; it causes the aQuantia
drivers that can be built to appear in the list of Ethernet drivers.
select NFC_ST_NCI
---help---
This module adds support for an I2C interface to the
- STMicroelectronics NFC NCI chips familly.
+ STMicroelectronics NFC NCI chips family.
Select this if your platform is using the i2c bus.
If you choose to build a module, it'll be called st-nci_i2c.
select NFC_ST_NCI
---help---
This module adds support for an SPI interface to the
- STMicroelectronics NFC NCI chips familly.
+ STMicroelectronics NFC NCI chips family.
Select this if your platform is using the spi bus.
If you choose to build a module, it'll be called st-nci_spi.
help
Support raw device dax access to a persistent memory
namespace. For environments that want to hard partition
- peristent memory, this capability provides a mechanism to
+ persistent memory, this capability provides a mechanism to
sub-divide a namespace into character devices that can only be
accessed via DAX (mmap(2)).
WARNING: This driver is incomplete as it lacks a proper keymap and the
*notify function only prints the ACPI event type value. Be warned that
you will need to provide some information if you have a Toshiba model
- with WMI event hotkeys and want to help with the develpment of this
+ with WMI event hotkeys and want to help with the development of this
driver.
If you have a WMI-based hotkeys Toshiba laptop, say Y or M here.
tristate "SBS Compliant charger"
depends on I2C
help
- Say Y to include support for SBS compilant battery chargers.
+ Say Y to include support for SBS compliant battery chargers.
config MANAGER_SBS
tristate "Smart Battery System Manager"
depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
help
This is the IBM POWER Virtual SCSI Target Server
- This driver uses the SRP protocol for communication betwen servers
+ This driver uses the SRP protocol for communication between servers
guest and/or the host that run on the same server.
More information on VSCSI protocol can be found at www.power.org
decisions concerning filesystem events. This is used by some fanotify
listeners which need to scan files before allowing the system access to
use those files. This is used by some anti-malware vendors and by some
- hierarchical storage managent systems.
+ hierarchical storage management systems.
If unsure, say N.
*
* This macro dynamically allocates a new fifo buffer.
*
- * The numer of elements will be rounded-up to a power of 2.
+ * The number of elements will be rounded-up to a power of 2.
* The fifo will be release with kfifo_free().
* Return 0 if no error, otherwise an error code.
*/
* @buffer: the preallocated buffer to be used
* @size: the size of the internal buffer, this have to be a power of 2
*
- * This macro initialize a fifo using a preallocated buffer.
+ * This macro initializes a fifo using a preallocated buffer.
*
- * The numer of elements will be rounded-up to a power of 2.
+ * The number of elements will be rounded-up to a power of 2.
* Return 0 if no error, otherwise an error code.
*/
#define kfifo_init(fifo, buffer, size) \
help
Check modules for valid signatures upon load: the signature
is simply appended to the module. For more information see
- Documentation/module-signing.txt.
+ <file:Documentation/admin-guide/module-signing.rst>.
Note that this option adds the OpenSSL development packages as a
kernel build dependency so that the signing tool can use its crypto
select GENERIC_TRACER
help
This tracer, when enabled will create one or more kernel threads,
- depening on what the cpumask file is set to, which each thread
+ depending on what the cpumask file is set to, which each thread
spinning in a loop looking for interruptions caused by
something other than the kernel. For example, if a
System Management Interrupt (SMI) takes a noticeable amount of
iteration
A kernel thread is created that will spin with interrupts disabled
- for "width" microseconds in every "widow" cycle. It will not spin
+ for "width" microseconds in every "window" cycle. It will not spin
for "window - width" microseconds, where the system can
continue to operate.
if (ret != XZ_OK)
return ret;
+ /* Fall through */
+
case SEQ_BLOCK_START:
/* We need one byte of input to continue. */
if (b->in_pos == b->in_size)
s->temp.pos = 0;
s->sequence = SEQ_BLOCK_HEADER;
+ /* Fall through */
+
case SEQ_BLOCK_HEADER:
if (!fill_temp(s, b))
return XZ_OK;
s->sequence = SEQ_BLOCK_UNCOMPRESS;
+ /* Fall through */
+
case SEQ_BLOCK_UNCOMPRESS:
ret = dec_block(s, b);
if (ret != XZ_STREAM_END)
s->sequence = SEQ_BLOCK_PADDING;
+ /* Fall through */
+
case SEQ_BLOCK_PADDING:
/*
* Size of Compressed Data + Block Padding
s->sequence = SEQ_BLOCK_CHECK;
+ /* Fall through */
+
case SEQ_BLOCK_CHECK:
if (s->check_type == XZ_CHECK_CRC32) {
ret = crc32_validate(s, b);
s->sequence = SEQ_INDEX_PADDING;
+ /* Fall through */
+
case SEQ_INDEX_PADDING:
while ((s->index.size + (b->in_pos - s->in_start))
& 3) {
s->sequence = SEQ_INDEX_CRC32;
+ /* Fall through */
+
case SEQ_INDEX_CRC32:
ret = crc32_validate(s, b);
if (ret != XZ_STREAM_END)
s->temp.size = STREAM_HEADER_SIZE;
s->sequence = SEQ_STREAM_FOOTER;
+ /* Fall through */
+
case SEQ_STREAM_FOOTER:
if (!fill_temp(s, b))
return XZ_OK;
#include "internal.h"
/*
- * By default transparent hugepage support is disabled in order that avoid
- * to risk increase the memory footprint of applications without a guaranteed
- * benefit. When transparent hugepage support is enabled, is for all mappings,
- * and khugepaged scans all mappings.
+ * By default, transparent hugepage support is disabled in order to avoid
+ * risking an increased memory footprint for applications that are not
+ * guaranteed to benefit from it. When transparent hugepage support is
+ * enabled, it is for all mappings, and khugepaged scans all mappings.
* Defrag is invoked by khugepaged hugepage allocations and by page faults
* for all hugepage allocations.
*/
* __entry->bar.x = y;
* __array: There are three fields (type, name, size). The type is the
- * type of elements in teh array, the name is the name of the array.
+ * type of elements in the array, the name is the name of the array.
* size is the number of items in the array (not the total size).
*
* __array( char, foo, 10) is the same as saying: char foo[10];
* type is the type of the element, name is the name of the array.
* The size is different than __array. It is not a static number,
* but the algorithm to figure out the length of the array for the
- * specific instance of tracepoint. Again, size is the numebr of
+ * specific instance of tracepoint. Again, size is the number of
* items in the array, not the total length in bytes.
*
* __dynamic_array( int, foo, bar) is similar to: int foo[bar];
* Notice, that "__entry" is not needed here.
*
* __string: This is a special kind of __dynamic_array. It expects to
- * have a nul terminated character array passed to it (it allows
+ * have a null terminated character array passed to it (it allows
* for NULL too, which would be converted into "(null)"). __string
- * takes two paramenter (name, src), where name is the name of
+ * takes two parameter (name, src), where name is the name of
* the string saved, and src is the string to copy into the
* ring buffer.
*
/*
* Here's a better way for the previous samples (except, the first
- * exmaple had more fields and could not be used here).
+ * example had more fields and could not be used here).
*/
DEFINE_EVENT(foo_template, foo_with_template_simple,
TP_PROTO(const char *foo, int bar),
projects / platform / kernel / linux-rpi.git / commitdiff