serial: dcc: Move driver to DM

Enabling this driver requires some DT changes.
Adding DCC to root or main bus:
dcc: dcc {
	compatible = "arm,dcc";
	u-boot,dm-pre-reloc;
};

Extend alias list to link DCC:
	serial0 = &uart0;
	serial1 = &uart1;
	serial2 = &dcc;

Change stdout-path to point to dcc port.
	stdout-path = "serial2:115200n8";

Also add support for debug uart to help with early debug.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index fac3176..92d4212 100644 (file)
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -119,6 +119,17 @@ config DEBUG_UART_UARTLITE
          You will need to provide parameters to make this work. The driver will
          be available until the real driver-model serial is running.
 
+config DEBUG_UART_ARM_DCC
+       bool "ARM DCC"
+       help
+         Select this to enable a debug UART using the ARM JTAG DCC port.
+         The DCC port can be used for very early debugging and doesn't require
+         any additional setting like address/baudrate/clock. On systems without
+         any serial interface this is the easiest way how to get console.
+         Every ARM core has own DCC port which is the part of debug interface.
+         This port is available at least on ARMv6, ARMv7, ARMv8 and XScale
+         architectures.
+
 config DEBUG_UART_ZYNQ
        bool "Xilinx Zynq"
        help

diff --git a/drivers/serial/arm_dcc.c b/drivers/serial/arm_dcc.c
index 4624666..07981e1 100644 (file)
--- a/drivers/serial/arm_dcc.c
+++ b/drivers/serial/arm_dcc.c
@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2004-2007 ARM Limited.
  * Copyright (C) 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2015 - 2016 Xilinx, Inc, Michal Simek
  *
  * SPDX-License-Identifier:    GPL-2.0
  *
@@ -16,6 +17,7 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <serial.h>
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V7)
@@ -94,12 +96,7 @@
 
 #define TIMEOUT_COUNT 0x4000000
 
-static int arm_dcc_init(void)
-{
-       return 0;
-}
-
-static int arm_dcc_getc(void)
+static int arm_dcc_getc(struct udevice *dev)
 {
        int ch;
        register unsigned int reg;
@@ -112,7 +109,7 @@ static int arm_dcc_getc(void)
        return ch;
 }
 
-static void arm_dcc_putc(char ch)
+static int arm_dcc_putc(struct udevice *dev, char ch)
 {
        register unsigned int reg;
        unsigned int timeout_count = TIMEOUT_COUNT;
@@ -123,41 +120,57 @@ static void arm_dcc_putc(char ch)
                        break;
        }
        if (timeout_count == 0)
-               return;
+               return -EAGAIN;
        else
                write_dcc(ch);
+
+       return 0;
 }
 
-static int arm_dcc_tstc(void)
+static int arm_dcc_pending(struct udevice *dev, bool input)
 {
        register unsigned int reg;
 
-       can_read_dcc(reg);
+       if (input) {
+               can_read_dcc(reg);
+       } else {
+               can_write_dcc(reg);
+       }
 
        return reg;
 }
 
-static void arm_dcc_setbrg(void)
-{
-}
+static const struct dm_serial_ops arm_dcc_ops = {
+       .putc = arm_dcc_putc,
+       .pending = arm_dcc_pending,
+       .getc = arm_dcc_getc,
+};
+
+static const struct udevice_id arm_dcc_ids[] = {
+       { .compatible = "arm,dcc", },
+       { }
+};
 
-static struct serial_device arm_dcc_drv = {
+U_BOOT_DRIVER(serial_dcc) = {
        .name   = "arm_dcc",
-       .start  = arm_dcc_init,
-       .stop   = NULL,
-       .setbrg = arm_dcc_setbrg,
-       .putc   = arm_dcc_putc,
-       .puts   = default_serial_puts,
-       .getc   = arm_dcc_getc,
-       .tstc   = arm_dcc_tstc,
+       .id     = UCLASS_SERIAL,
+       .of_match = arm_dcc_ids,
+       .ops    = &arm_dcc_ops,
+       .flags = DM_FLAG_PRE_RELOC,
 };
 
-void arm_dcc_initialize(void)
+#ifdef CONFIG_DEBUG_UART_ARM_DCC
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
 {
-       serial_register(&arm_dcc_drv);
 }
 
-__weak struct serial_device *default_serial_console(void)
+static inline void _debug_uart_putc(int ch)
 {
-       return &arm_dcc_drv;
+       arm_dcc_putc(NULL, ch);
 }
+
+DEBUG_UART_FUNCS
+#endif