# check all our modules to see if they should be sourced.
# This builds a list of modules that we will install next.
-check_modules
+check_module_dir
# source our modules.
for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
if strstr "$mods_to_load" " $mod "; then
dinfo "*** Sourcing module $mod"
if [[ $kernel_only = yes ]]; then
- [[ -x $moddir/installkernel ]] && . "$moddir/installkernel"
+ module_installkernel $mod
else
- . "$moddir/install"
- if [[ $no_kernel != yes && -x $moddir/installkernel ]]; then
- . "$moddir/installkernel"
+ module_install $mod
+ if [[ $no_kernel != yes ]]; then
+ module_installkernel $mod
fi
fi
mods_to_load=${mods_to_load// $mod /}
esac
}
+is_func() {
+ [[ $(type -t $1) = "function" ]]
+}
+
# Log initrd creation.
if ! [[ $dracutlogfile ]]; then
[[ $dracutbasedir = /usr/share/dracut ]] && \
done
}
-check_module_deps() {
- local moddir dep ret
- # if we are already set to be loaded, we do not have to be checked again.
- strstr " $mods_to_load " " $1 " && return
- strstr " $omit_dracutmodules " " $1 " && return 1
- # turn a module name into a directory, if we can.
- moddir=$(echo ${dracutbasedir}/modules.d/??${1})
- [[ -d $moddir && -x $moddir/install ]] || return 1
- # if we do not have a check script, we are unconditionally included
- if [[ -x $moddir/check ]]; then
- "$moddir/check"
+module_check() {
+ local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+ [[ -d $moddir ]] || return 1
+ if [[ ! -f $moddir/module-info.sh ]]; then
+ # if we do not have a check script, we are unconditionally included
+ [[ -x $moddir/check ]] || return 0
+ $moddir/check $hostonly
+ return $?
+ else
+ unset check depends install installkernel
+ . $moddir/module-info.sh
+ is_func check || return 0
+ check
ret=$?
- # a return value of 255 = load module only as a dependency.
- ((ret==0||ret==255)) || return 1
- for dep in $("$moddir/check" -d); do
- check_module_deps "$dep" && continue
- dwarning "Dependency $mod failed."
- return 1
- done
+ unset check depends install installkernel
+ return $ret
fi
- mods_to_load+=" $1 "
}
-should_source_module() {
- local dep
- local ret
- if [[ $kernel_only = yes ]]; then
- [[ -x $1/installkernel ]] && return 0
- return 1
+module_depends() {
+ local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+ [[ -d $moddir ]] || return 1
+ if [[ ! -f $moddir/module-info.sh ]]; then
+ # if we do not have a check script, we have no deps
+ [[ -x $moddir/check ]] || return 0
+ $moddir/check -d
+ return $?
+ else
+ unset check depends install installkernel
+ . $moddir/module-info.sh
+ is_func depends || return 0
+ depends
+ ret=$?
+ unset check depends install installkernel
+ return $ret
fi
- [[ -x $1/install || -x $1/installkernel ]] || return 1
- [[ -x $1/check ]] || return 0
- "$1/check" $hostonly || continue
- for dep in $("$1/check" -d); do
- check_module_deps "$dep" && continue
- dwarning "Cannot load dracut module \"$mod\", dependencies failed."
- return 1
- done
}
-check_modules() {
- local modcheck;
- local mod;
- for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
- local mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
- # If we are already scheduled to be loaded, no need to check again.
- strstr " $mods_to_load " " $mod " && continue
- # This should never happen, but...
- [[ -d $moddir ]] || continue
- strstr " $omit_dracutmodules " " $mod " && continue
-
- if ! strstr " $dracutmodules $add_dracutmodules " " $mod "; then
- # module not in our list
- if [[ $dracutmodules = all ]]; then
- # check, if we can install this module
- should_source_module "$moddir" || continue
- else
- # skip this module
- continue
- fi
+module_install() {
+ local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+ [[ -d $moddir ]] || return 1
+ if [[ ! -f $moddir/module-info.sh ]]; then
+ [[ -x $moddir/install ]] && . "$moddir/install"
+ return $?
+ else
+ unset check depends install installkernel
+ . $moddir/module-info.sh
+ is_func install || return 0
+ install
+ ret=$?
+ unset check depends install installkernel
+ return $ret
+ fi
+}
+
+module_installkernel() {
+ local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+ [[ -d $moddir ]] || return 1
+ if [[ ! -f $moddir/module-info.sh ]]; then
+ [[ -x $moddir/installkernel ]] && . "$moddir/installkernel"
+ return $?
+ else
+ unset check depends install installkernel
+ . $moddir/module-info.sh
+ is_func installkernel || return 0
+ installkernel
+ ret=$?
+ unset check depends install installkernel
+ return $ret
+ fi
+}
+
+check_module() {
+ local mod=$1;
+ local moddir=$(echo ${dracutbasedir}/modules.d/??${1})
+ local moddep;
+ # If we are already scheduled to be loaded, no need to check again.
+ strstr " $mods_to_load " " $mod " && return 0
+ strstr " $mods_checked_as_dep " " $mod " && return 1
+
+ # This should never happen, but...
+ [[ -d $moddir ]] || return 1
+
+ [[ $2 ]] || mods_checked_as_dep+=" $mod "
+
+ strstr " $omit_dracutmodules " " $mod " && return 1
+
+ if strstr " $dracutmodules $add_dracutmodules " " $mod "; then
+ module_check $mod; ret=$?
+ # explicit module, so also accept ret=255
+ [[ $ret = 0 || $ret = 255 ]] || return 1
+ else
+ # module not in our list
+ if [[ $dracutmodules = all ]]; then
+ # check, if we can and should install this module
+ module_check $mod || return 1
else
- if [ -x "$moddir/check" ] \
- && "$moddir/check" -d > /dev/null 2>&1; then
- check_module_deps "$mod" || {
- dwarning "Cannot load dracut module \"$mod\", dependencies failed."
- continue
- }
- fi
+ # skip this module
+ return 1
fi
+ fi
- mods_to_load+=" $mod "
+ for moddep in $(module_depends $mod); do
+ # handle deps as if they were manually added
+ strstr " $add_dracutmodules " " $moddep " || \
+ add_dracutmodules+=" $moddep "
+ # if a module we depend on fail, fail also
+ check_module $moddep || return 1
done
- modcheck=$add_dracutmodules
- [[ $dracutmodules != all ]] && modcheck="$m $dracutmodules"
- for mod in $modcheck; do
- strstr " $mods_to_load " " $mod " && continue
- strstr " $omit_dracutmodules " " $mod " && continue
- dwarning "Dracut module \"$mod\" cannot be found."
+ strstr " $mods_to_load " " $mod " || \
+ mods_to_load+=" $mod "
+
+ return 0
+}
+
+check_module_dir() {
+ local modcheck;
+ local mod;
+ mods_to_load=""
+ for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
+ local mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
+ check_module $mod 1
done
}
<?xml version='1.0' encoding='UTF-8'?>
+<!-- This document was created with Syntext Serna Free. -->
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd" []>
<book>
- <title>
- <inlinemediaobject><imageobject><imagedata valign="middle" fileref="dracut.png" format="PNG"/></imageobject><imageobject><imagedata valign="middle" fileref="dracut.svg" format="SVG"/></imageobject><imageobject>
- <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="dracut.svg" encoding="UTF-8" parse="xml"/></imageobject></inlinemediaobject>dracut</title>
+ <title><inlinemediaobject>
+ <imageobject>
+ <imagedata valign="middle" fileref="dracut.png" format="PNG"/>
+ </imageobject>
+ <imageobject>
+ <imagedata valign="middle" fileref="dracut.svg" format="SVG"/>
+ </imageobject>
+ <imageobject>
+ <xi:include xmlns:xi="http://www.w3.org/2001/XInclude" href="dracut.svg" encoding="UTF-8" parse="xml"/>
+ </imageobject>
+ </inlinemediaobject>dracut</title>
<bookinfo>
<author>
<firstname>Harald</firstname>
<section>
<title>Writing a Module</title>
<para>A simple example module is <filename>96insmodpost</filename>, which modprobes a kernel module after udev has settled and the basic device drivers have been loaded.</para>
- <para>First we create a <filename>check</filename> script, which just exits with <errorcode>0</errorcode> indicating that this module should be included by default.</para>
- <para><filename>check</filename>:</para>
- <programlisting>exit 0</programlisting>
- <para>The we create the install script, which installs a cmdline hook with priority number 20 called <filename>parse-insmodpost.sh</filename>. It also installs the <filename>insmodpost.sh</filename> script in <filename>/sbin</filename>.</para>
- <para><filename>install</filename>:</para>
+ <para>All module installation information is in the file module-info.sh.</para>
+ <para>First we create a <function>check()</function> function, which just exits with <errorcode>0</errorcode> indicating that this module should be included by default.</para>
+ <para><function>check()</function>:</para>
+ <programlisting>return 0</programlisting>
+ <para>The we create the <function>install()</function> function, which installs a cmdline hook with priority number 20 called <filename>parse-insmodpost.sh</filename>. It also installs the <filename>insmodpost.sh</filename> script in <filename>/sbin</filename>.</para>
+ <para><function>install()</function>:</para>
<programlisting>inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh</programlisting>
<para>The <filename>pase-instmodpost.sh</filename> parses the kernel command line for a argument <envar>rd.driver.post</envar>, blacklists the module from being autoloaded and installs the hook <filename>insmodpost.sh</filename> in the <filename>initqueue-settled</filename>.</para>
done
</programlisting>
<section>
- <title>check</title>
- <para><filename>check</filename> is called by dracut to evaluate the inclusion of a dracut module in the initramfs.</para>
- <para><filename>check</filename> also can be called with arguments, which are described in the following list.</para>
+ <title>check()</title>
+ <para><filename>
+ <function>check()</function>
+ </filename> is called by dracut to evaluate the inclusion of a dracut module in the initramfs.</para>
<variablelist>
<varlistentry>
- <term><filename>check</filename> -d</term>
+ <term> $hostonly</term>
<listitem>
- <para>If <filename>check</filename> is called with parameter <parameter>-d</parameter>, then the stdout output is taken as the dracut module names of the dependencies this module needs.</para>
- </listitem>
- </varlistentry>
- <varlistentry>
- <term><filename>check</filename> -h</term>
- <listitem>
- <para>If check is called with parameter <parameter>-h</parameter>, then the module check should be in "hostonly" mode, which means, that the check should only return 0, if the module is really needed to boot this specific host.</para>
+ <para>If the $hostonly variable is set, then the module check() function should be in "hostonly" mode, which means, that the check() should only return 0, if the module is really needed to boot this specific host.</para>
</listitem>
</varlistentry>
</variablelist>
- <para>If <filename>check</filename> is called without parameters, it should return the following exit codes.</para>
+ <para><function>check()</function> should return with:</para>
<variablelist>
<varlistentry>
- <term>exit 0</term>
+ <term>0</term>
<listitem>
<para>Include the dracut module in the initramfs.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>exit 1</term>
+ <term>1</term>
<listitem>
<para>Do not include the dracut module. The requirements are not fullfilled (missing tools, etc.)</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>exit 255</term>
+ <term>255</term>
<listitem>
<para>Only include the dracut module, if another module requires it or if explicitly specified in the config file or on the argument list.</para>
</listitem>
</variablelist>
</section>
<section>
- <title>Install</title>
+ <title>depends()</title>
+ <para>The function <function>depends()</function> should <function>echo</function> all other dracut module names the module depends on.</para>
+ </section>
+ <section>
+ <title>install()</title>
<para>dracut_install</para>
<para>inst</para>
<para>inst_hook</para>
<para/>
</section>
<section>
- <title>Installkernel</title>
+ <title>installkernel()</title>
<para>instmods</para>
</section>
<section>
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-[ -x /sbin/bootchartd ] || exit 1
-
-# do not enable bootchartd by default
-exit 255
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-inst /sbin/bootchartd
-inst /bin/bash
-inst_symlink /init /sbin/init
-inst_dir /lib/bootchart/tmpfs
-inst /lib/bootchart/bootchart-collector
-inst /etc/bootchartd.conf
-inst /sbin/accton
-inst /usr/bin/pkill /bin/pkill
-inst /bin/echo
-inst /bin/grep
-inst /bin/usleep
-inst /usr/bin/[ /bin/[
-
-mknod -m 0666 "${initdir}/dev/null" c 1 3
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ [ -x /sbin/bootchartd ] || return 1
+ return 255
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ inst /sbin/bootchartd
+ inst /bin/bash
+ inst_symlink /init /sbin/init
+ inst_dir /lib/bootchart/tmpfs
+ inst /lib/bootchart/bootchart-collector
+ inst /etc/bootchartd.conf
+ inst /sbin/accton
+ inst /usr/bin/pkill /bin/pkill
+ inst /bin/echo
+ inst /bin/grep
+ inst /bin/usleep
+ inst /usr/bin/[ /bin/[
+
+ mknod -m 0666 "${initdir}/dev/null" c 1 3
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-[ -x /bin/dash ]
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# If another shell is already installed, do not use dash
-[[ -x $initdir/bin/sh ]] && return
-
-# Prefer dash as /bin/sh if it is available.
-inst /bin/dash && ln -sf dash "${initdir}/bin/sh"
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ [ -x /bin/dash ]
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ # If another shell is already installed, do not use dash
+ [[ -x $initdir/bin/sh ]] && return
+
+ # Prefer dash as /bin/sh if it is available.
+ inst /bin/dash && ln -sf dash "${initdir}/bin/sh"
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-[[ $1 = -d ]] && exit 0
-exit 255
-
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-inst_hook pre-trigger 01 "$moddir/fips.sh"
-dracut_install sha512hmac rmmod insmod mount uname umount
-
-for dir in "$usrlibdir" "$libdir"; do
- [[ -e $dir/libsoftokn3.so ]] && \
- dracut_install $dir/libsoftokn3.so $dir/libsoftokn3.chk \
- $dir/libfreebl3.so $dir/libfreebl3.chk && \
- break
-done
-
-dracut_install $usrlibdir/hmaccalc/sha512hmac.hmac
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-FIPSMODULES="aead aes_generic aes-x86_64 ansi_cprng cbc ccm chainiv ctr"
-FIPSMODULES="$FIPSMODULES des deflate ecb eseqiv hmac seqiv sha256 sha512"
-FIPSMODULES="$FIPSMODULES cryptomgr crypto_null tcrypt"
-
-mkdir -p "${initdir}/etc/modprobe.d"
-
-for mod in $FIPSMODULES; do
- if instmods $mod; then
- echo $mod >> "${initdir}/etc/fipsmodules"
- echo "blacklist $mod" >> "${initdir}/etc/modprobe.d/fips.conf"
- fi
-done
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ return 255
+}
+
+depends() {
+ return 0
+}
+
+installkernel() {
+ FIPSMODULES="aead aes_generic aes-x86_64 ansi_cprng cbc ccm chainiv ctr"
+ FIPSMODULES="$FIPSMODULES des deflate ecb eseqiv hmac seqiv sha256 sha512"
+ FIPSMODULES="$FIPSMODULES cryptomgr crypto_null tcrypt"
+
+ mkdir -p "${initdir}/etc/modprobe.d"
+
+ for mod in $FIPSMODULES; do
+ if instmods $mod; then
+ echo $mod >> "${initdir}/etc/fipsmodules"
+ echo "blacklist $mod" >> "${initdir}/etc/modprobe.d/fips.conf"
+ fi
+ done
+}
+
+install() {
+ inst_hook pre-trigger 01 "$moddir/fips.sh"
+ dracut_install sha512hmac rmmod insmod mount uname umount
+
+ for dir in "$usrlibdir" "$libdir"; do
+ [[ -e $dir/libsoftokn3.so ]] && \
+ dracut_install $dir/libsoftokn3.so $dir/libsoftokn3.chk \
+ $dir/libfreebl3.so $dir/libfreebl3.chk && \
+ break
+ done
+
+ dracut_install $usrlibdir/hmaccalc/sha512hmac.hmac
+}
+
+++ /dev/null
-#!/bin/bash
-
-[[ $1 = -d ]] && exit 0
-
-type -P busybox >/dev/null || exit 1
-
-exit 255
+++ /dev/null
-#!/bin/bash
-
-inst busybox /sbin/busybox
-
-# List of shell programs that we use in other official dracut modules, that
-# must be supported by the busybox installed on the host system
-progs="echo grep usleep [ rmmod insmod mount uname umount setfont kbd_mode stty gzip bzip2 chvt readlink blkid dd losetup tr sed seq ps more cat rm free ping netstat vi ping6 fsck ip hostname basename mknod mkdir pidof sleep chroot ls cp mv dmesg mkfifo less ln modprobe"
-
-# FIXME: switch_root should be in the above list, but busybox version hangs
-# (using busybox-1.15.1-7.fc14.i686 at the time of writing)
-
-for i in $progs; do
- path=$(find_binary "$i")
- ln -s /sbin/busybox "$initdir/$path"
-done
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ type -P busybox >/dev/null || return 1
+
+ return 255
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ inst busybox /sbin/busybox
+
+ # List of shell programs that we use in other official dracut modules, that
+ # must be supported by the busybox installed on the host system
+ progs="echo grep usleep [ rmmod insmod mount uname umount setfont kbd_mode stty gzip bzip2 chvt readlink blkid dd losetup tr sed seq ps more cat rm free ping netstat vi ping6 fsck ip hostname basename mknod mkdir pidof sleep chroot ls cp mv dmesg mkfifo less ln modprobe"
+
+ # FIXME: switch_root should be in the above list, but busybox version hangs
+ # (using busybox-1.15.1-7.fc14.i686 at the time of writing)
+
+ for i in $progs; do
+ path=$(find_binary "$i")
+ ln -s /sbin/busybox "$initdir/$path"
+ done
+
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
-DEFAULT_FONT=LatArCyrHeb-16
-I18N_CONF="/etc/locale.conf"
-VCONFIG_CONF="/etc/vconsole.conf"
-
-# This is from 10redhat-i18n.
-findkeymap () {
- local MAP=$1
- [[ ! -f $MAP ]] && \
- MAP=$(find ${kbddir}/keymaps -type f -name $MAP -o -name $MAP.\* | head -n1)
- [[ " $KEYMAPS " = *" $MAP "* ]] && return
- KEYMAPS="$KEYMAPS $MAP"
- case $MAP in
- *.gz) cmd=zgrep;;
- *.bz2) cmd=bzgrep;;
- *) cmd=grep ;;
- esac
-
- for INCL in $($cmd "^include " $MAP | cut -d' ' -f2 | tr -d '"'); do
- for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do
- findkeymap $FN
- done
- done
-}
-
-# Function gathers variables from distributed files among the tree, maps to
-# specified names and prints the result in format "new-name=value".
-#
-# $@ = list in format specified below (BNF notation)
-#
-# <list> ::= <element> | <element> " " <list>
-# <element> ::= <conf-file-name> ":" <map-list>
-# <map-list> ::= <mapping> | <mapping> "," <map-list>
-# <mapping> ::= <src-var> "-" <dst-var> | <src-var>
-#
-# We assume no whitespace are allowed between symbols.
-# <conf-file-name> is a file holding <src-var> in your system.
-# <src-var> is a variable holding value of meaning the same as <dst-var>.
-# <dst-var> is a variable which will be set up inside initramfs.
-# If <dst-var> has the same name as <src-var> we can omit <dst-var>.
-#
-# Example:
-# /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
-# <list> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
-# <element> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
-# <conf-file-name> = /etc/conf.d/keymaps
-# <map-list> = KEYMAP,extended_keymaps-EXT_KEYMAPS
-# <mapping> = KEYMAP
-# <src-var> = KEYMAP
-# <mapping> = extended_keymaps-EXT_KEYMAPS
-# <src-var> = extended_keymaps
-# <dst-var> = EXT_KEYMAPS
-gather_vars() {
- local item map value
-
- for item in $@
- do
- item=(${item/:/ })
- for map in ${item[1]//,/ }
- do
- map=(${map//-/ })
- value=$(grep "^${map[0]}=" "${item[0]}")
- value=${value#*=}
- echo "${map[1]:-${map[0]}}=${value}"
- done
- done
-}
-
-install_base() {
- dracut_install setfont loadkeys kbd_mode stty
-
- inst ${moddir}/console_init /lib/udev/console_init
- inst_rules ${moddir}/10-console.rules
- inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
-}
-
-install_all_kbd() {
- local rel f
-
- for f in $(eval find ${kbddir}/{${KBDSUBDIRS}} -type f -print)
- do
- inst $f
- done
-
- # remove unnecessary files
- rm -f "${initdir}${kbddir}/consoletrans/utflist"
- find "${initdir}${kbddir}/" -name README\* -delete
-
- dracut_install gzip bzip2
-}
-
-install_local_i18n() {
- local map
-
- eval $(gather_vars ${i18n_vars})
- [ -f $I18N_CONF ] && . $I18N_CONF
- [ -f $VCONFIG_CONF ] && . $VCONFIG_CONF
-
- # Gentoo user may have KEYMAP set to something like "-u pl2",
- KEYMAP=${KEYMAP#-* }
- # I'm not sure of the purpose of UNIKEYMAP and GRP_TOGGLE. They were in
- # original redhat-i18n module. Anyway it won't hurt.
- EXT_KEYMAPS+=\ ${UNIKEYMAP}\ ${GRP_TOGGLE}
-
- [[ ${KEYMAP} ]] || dwarning 'No KEYMAP.' || return 1
- findkeymap ${KEYMAP}
-
- for map in ${EXT_KEYMAPS}
- do
- dinfo "Adding extra map: ${map}"
- findkeymap ${map}
- done
-
- inst_opt_decompress ${KEYMAPS}
-
- inst_opt_decompress ${kbddir}/consolefonts/${DEFAULT_FONT}.*
-
- if [[ ${FONT} ]]
- then
- FONT=${FONT%.psf*}
- inst_opt_decompress ${kbddir}/consolefonts/${FONT}.*
- fi
-
- if [[ ${FONT_MAP} ]]
- then
- FONT_MAP=${FONT_MAP%.trans}
- inst ${kbddir}/consoletrans/${FONT_MAP}.trans
- fi
-
- if [[ ${FONT_UNIMAP} ]]
- then
- FONT_UNIMAP=${FONT_UNIMAP%.uni}
- inst ${kbddir}/unimaps/${FONT_UNIMAP}.uni
- fi
-
- if [[ ${UNICODE} ]]
- then
- if [[ ${UNICODE^^} = YES || ${UNICODE} = 1 ]]
- then
- UNICODE=1
- elif [[ ${UNICODE^^} = NO || ${UNICODE} = 0 ]]
- then
- UNICODE=0
- else
- UNICODE=''
- fi
- fi
- if [[ ! ${UNICODE} && ${LANG^^} =~ .*\.UTF-?8 ]]
- then
- UNICODE=1
- fi
-
- mksubdirs ${initdir}${I18N_CONF}
- mksubdirs ${initdir}${VCONFIG_CONF}
- print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
- print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
- return 0
-}
-
-checks() {
- for kbddir in ${kbddir} /usr/lib/kbd /lib/kbd /usr/share /usr/share/kbd
- do
- [[ -d "${kbddir}" ]] && \
- for dir in ${KBDSUBDIRS//,/ }
- do
- [[ -d "${kbddir}/${dir}" ]] && continue
- false
- done && break
- kbddir=''
- done
-
- [[ ${kbddir} ]] || {
- derror "Directories ${KBDSUBDIRS//,/, } not found. Please inform us about the issue including your OS name and version."
- return 1
- }
-
- [[ -f $I18N_CONF && -f $VCONFIG_CONF ]] || \
- [[ ! ${hostonly} || ${i18n_vars} ]] || {
- dwarning 'Please set up i18n_vars in configuration file.'
- }
- return 0
-}
-
-
-if checks
-then
- install_base
-
- if [[ ${hostonly} ]]
- then
- install_local_i18n || install_all_kbd
- else
- install_all_kbd
- fi
-fi
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ return 0
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
+ DEFAULT_FONT=LatArCyrHeb-16
+ I18N_CONF="/etc/locale.conf"
+ VCONFIG_CONF="/etc/vconsole.conf"
+
+ # This is from 10redhat-i18n.
+ findkeymap () {
+ local MAP=$1
+ [[ ! -f $MAP ]] && \
+ MAP=$(find ${kbddir}/keymaps -type f -name $MAP -o -name $MAP.\* | head -n1)
+ [[ " $KEYMAPS " = *" $MAP "* ]] && return
+ KEYMAPS="$KEYMAPS $MAP"
+ case $MAP in
+ *.gz) cmd=zgrep;;
+ *.bz2) cmd=bzgrep;;
+ *) cmd=grep ;;
+ esac
+
+ for INCL in $($cmd "^include " $MAP | cut -d' ' -f2 | tr -d '"'); do
+ for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do
+ findkeymap $FN
+ done
+ done
+ }
+
+# Function gathers variables from distributed files among the tree, maps to
+# specified names and prints the result in format "new-name=value".
+#
+# $@ = list in format specified below (BNF notation)
+#
+# <list> ::= <element> | <element> " " <list>
+# <element> ::= <conf-file-name> ":" <map-list>
+# <map-list> ::= <mapping> | <mapping> "," <map-list>
+# <mapping> ::= <src-var> "-" <dst-var> | <src-var>
+#
+# We assume no whitespace are allowed between symbols.
+# <conf-file-name> is a file holding <src-var> in your system.
+# <src-var> is a variable holding value of meaning the same as <dst-var>.
+# <dst-var> is a variable which will be set up inside initramfs.
+# If <dst-var> has the same name as <src-var> we can omit <dst-var>.
+#
+# Example:
+# /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
+# <list> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
+# <element> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
+# <conf-file-name> = /etc/conf.d/keymaps
+# <map-list> = KEYMAP,extended_keymaps-EXT_KEYMAPS
+# <mapping> = KEYMAP
+# <src-var> = KEYMAP
+# <mapping> = extended_keymaps-EXT_KEYMAPS
+# <src-var> = extended_keymaps
+# <dst-var> = EXT_KEYMAPS
+ gather_vars() {
+ local item map value
+
+ for item in $@
+ do
+ item=${item/:/ }
+ for map in ${item[1]//,/ }
+ do
+ map=${map//-/ }
+ value=$(grep "^${map[0]}=" "${item[0]}")
+ value=${value#*=}
+ echo "${map[1]:-${map[0]}}=${value}"
+ done
+ done
+ }
+
+ install_base() {
+ dracut_install setfont loadkeys kbd_mode stty
+
+ inst ${moddir}/console_init /lib/udev/console_init
+ inst_rules ${moddir}/10-console.rules
+ inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
+ }
+
+ install_all_kbd() {
+ local rel f
+
+ for f in $(eval find ${kbddir}/{${KBDSUBDIRS}} -type f -print)
+ do
+ inst $f
+ done
+
+ # remove unnecessary files
+ rm -f "${initdir}${kbddir}/consoletrans/utflist"
+ find "${initdir}${kbddir}/" -name README\* -delete
+
+ dracut_install gzip bzip2
+ }
+
+ install_local_i18n() {
+ local map
+
+ eval $(gather_vars ${i18n_vars})
+ [ -f $I18N_CONF ] && . $I18N_CONF
+ [ -f $VCONFIG_CONF ] && . $VCONFIG_CONF
+
+ # Gentoo user may have KEYMAP set to something like "-u pl2",
+ KEYMAP=${KEYMAP#-* }
+ # I'm not sure of the purpose of UNIKEYMAP and GRP_TOGGLE. They were in
+ # original redhat-i18n module. Anyway it won't hurt.
+ EXT_KEYMAPS+=\ ${UNIKEYMAP}\ ${GRP_TOGGLE}
+
+ [[ ${KEYMAP} ]] || dwarning 'No KEYMAP.' || return 1
+ findkeymap ${KEYMAP}
+
+ for map in ${EXT_KEYMAPS}
+ do
+ dinfo "Adding extra map: ${map}"
+ findkeymap ${map}
+ done
+
+ inst_opt_decompress ${KEYMAPS}
+
+ inst_opt_decompress ${kbddir}/consolefonts/${DEFAULT_FONT}.*
+
+ if [[ ${FONT} ]]
+ then
+ FONT=${FONT%.psf*}
+ inst_opt_decompress ${kbddir}/consolefonts/${FONT}.*
+ fi
+
+ if [[ ${FONT_MAP} ]]
+ then
+ FONT_MAP=${FONT_MAP%.trans}
+ inst ${kbddir}/consoletrans/${FONT_MAP}.trans
+ fi
+
+ if [[ ${FONT_UNIMAP} ]]
+ then
+ FONT_UNIMAP=${FONT_UNIMAP%.uni}
+ inst ${kbddir}/unimaps/${FONT_UNIMAP}.uni
+ fi
+
+ if [[ ${UNICODE} ]]
+ then
+ if [[ ${UNICODE^^} = YES || ${UNICODE} = 1 ]]
+ then
+ UNICODE=1
+ elif [[ ${UNICODE^^} = NO || ${UNICODE} = 0 ]]
+ then
+ UNICODE=0
+ else
+ UNICODE=''
+ fi
+ fi
+ if [[ ! ${UNICODE} && ${LANG^^} =~ .*\.UTF-?8 ]]
+ then
+ UNICODE=1
+ fi
+
+ mksubdirs ${initdir}${I18N_CONF}
+ mksubdirs ${initdir}${VCONFIG_CONF}
+ print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
+ print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
+ return 0
+ }
+
+ checks() {
+ for kbddir in ${kbddir} /usr/lib/kbd /lib/kbd /usr/share /usr/share/kbd
+ do
+ [[ -d "${kbddir}" ]] && \
+ for dir in ${KBDSUBDIRS//,/ }
+ do
+ [[ -d "${kbddir}/${dir}" ]] && continue
+ false
+ done && break
+ kbddir=''
+ done
+
+ [[ ${kbddir} ]] || {
+ derror "Directories ${KBDSUBDIRS//,/, } not found. Please inform us about the issue including your OS name and version."
+ return 1
+ }
+
+ [[ -f $I18N_CONF && -f $VCONFIG_CONF ]] || \
+ [[ ! ${hostonly} || ${i18n_vars} ]] || {
+ dwarning 'Please set up i18n_vars in configuration file.'
+ }
+ return 0
+ }
+
+ if checks
+ then
+ install_base
+
+ if [[ ${hostonly} ]]
+ then
+ install_local_i18n || install_all_kbd
+ else
+ install_all_kbd
+ fi
+ fi
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-[ -f /etc/redhat-release ]
-
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-if [ -e "$moddir/dracut-version" ]; then
- dracut_rpm_version=$(cat "$moddir/dracut-version")
- inst "$moddir/dracut-version" /$dracut_rpm_version
-else
- if rpm -qf $(type -P $0) &>/dev/null; then
- dracut_rpm_version=$(rpm -qf --qf '%{name}-%{version}-%{release}\n' $(type -P $0) | { ver="";while read line;do ver=$line;done;echo $ver;} )
- echo $dracut_rpm_version > $initdir/$dracut_rpm_version
- fi
-fi
-inst_hook cmdline 01 "$moddir/version.sh"
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ [ -f /etc/redhat-release ]
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ if [ -e "$moddir/dracut-version" ]; then
+ dracut_rpm_version=$(cat "$moddir/dracut-version")
+ inst "$moddir/dracut-version" /$dracut_rpm_version
+ else
+ if rpm -qf $(type -P $0) &>/dev/null; then
+ dracut_rpm_version=$(rpm -qf --qf '%{name}-%{version}-%{release}\n' $(type -P $0) | { ver="";while read line;do ver=$line;done;echo $ver;} )
+ echo $dracut_rpm_version > $initdir/$dracut_rpm_version
+ fi
+ fi
+ inst_hook cmdline 01 "$moddir/version.sh"
+
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-if [[ $1 = -d ]]; then
- [ -d /etc/sysconfig/network-scripts/ ] && echo ifcfg
- exit 0
-fi
-
-. $dracutfunctions
-
-for program in ip arping; do
- if ! type -P $program >/dev/null; then
- dwarning "Could not find program \"$program\" required by network."
- exit 1
- fi
-done
-for program in dhclient brctl ifenslave tr; do
- if ! type -P $program >/dev/null; then
- dwarning "Could not find program \"$program\" it might be required by network."
- fi
-done
-
-exit 255
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-dracut_install ip dhclient brctl arping ifenslave tr
-inst "$moddir/ifup" "/sbin/ifup"
-inst "$moddir/netroot" "/sbin/netroot"
-inst "$moddir/dhclient-script" "/sbin/dhclient-script"
-inst "$moddir/dhclient.conf" "/etc/dhclient.conf"
-inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
-inst_hook pre-udev 60 "$moddir/net-genrules.sh"
-inst_hook cmdline 91 "$moddir/dhcp-root.sh"
-inst_hook cmdline 99 "$moddir/parse-ip-opts.sh"
-inst_hook cmdline 97 "$moddir/parse-bond.sh"
-inst_hook cmdline 98 "$moddir/parse-bridge.sh"
-inst_hook cmdline 99 "$moddir/parse-ifname.sh"
-inst_hook pre-pivot 10 "$moddir/kill-dhclient.sh"
-
-arch=$(uname -m)
-
-for dir in "$usrlibdir/tls/$arch" "$usrlibdir/tls" "$usrlibdir/$arch" \
- "$usrlibdir" "$libdir"; do
- for i in "$dir"/libnss_dns.so.* "$dir"/libnss_mdns4_minimal.so.*; do
- [ -e "$i" ] && dracut_install "$i"
- done
-done
-
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# Include wired net drivers, excluding wireless
-
-net_module_test() {
- local net_drivers='eth_type_trans|register_virtio_device'
- local unwanted_drivers='/(wireless|isdn|uwb)/'
- egrep -q $net_drivers "$1" && \
- egrep -qv 'iw_handler_get_spy' "$1" && \
- [[ ! $1 =~ $unwanted_drivers ]]
-}
-
-instmods $(filter_kernel_modules net_module_test)
-
-instmods ecb arc4
-# bridge modules
-instmods bridge stp llc
-instmods ipv6
-# bonding
-instmods bonding
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ . $dracutfunctions
+
+ for program in ip arping; do
+ if ! type -P $program >/dev/null; then
+ dwarning "Could not find program \"$program\" required by network."
+ return 1
+ fi
+ done
+ for program in dhclient brctl ifenslave tr; do
+ if ! type -P $program >/dev/null; then
+ dwarning "Could not find program \"$program\" it might be required by network."
+ fi
+ done
+
+ return 255
+}
+
+depends() {
+ [ -d /etc/sysconfig/network-scripts/ ] && echo ifcfg
+ return 0
+}
+
+installkernel() {
+ # Include wired net drivers, excluding wireless
+
+ net_module_test() {
+ local net_drivers='eth_type_trans|register_virtio_device'
+ local unwanted_drivers='/(wireless|isdn|uwb)/'
+ egrep -q $net_drivers "$1" && \
+ egrep -qv 'iw_handler_get_spy' "$1" && \
+ [[ ! $1 =~ $unwanted_drivers ]]
+ }
+
+ instmods $(filter_kernel_modules net_module_test)
+
+ instmods ecb arc4
+ # bridge modules
+ instmods bridge stp llc
+ instmods ipv6
+ # bonding
+ instmods bonding
+}
+
+install() {
+ dracut_install ip dhclient brctl arping ifenslave tr
+ inst "$moddir/ifup" "/sbin/ifup"
+ inst "$moddir/netroot" "/sbin/netroot"
+ inst "$moddir/dhclient-script" "/sbin/dhclient-script"
+ inst "$moddir/dhclient.conf" "/etc/dhclient.conf"
+ inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
+ inst_hook pre-udev 60 "$moddir/net-genrules.sh"
+ inst_hook cmdline 91 "$moddir/dhcp-root.sh"
+ inst_hook cmdline 99 "$moddir/parse-ip-opts.sh"
+ inst_hook cmdline 97 "$moddir/parse-bond.sh"
+ inst_hook cmdline 98 "$moddir/parse-bridge.sh"
+ inst_hook cmdline 99 "$moddir/parse-ifname.sh"
+ inst_hook pre-pivot 10 "$moddir/kill-dhclient.sh"
+
+ arch=$(uname -m)
+
+ for dir in "$usrlibdir/tls/$arch" "$usrlibdir/tls" "$usrlibdir/$arch" \
+ "$usrlibdir" "$libdir"; do
+ for i in "$dir"/libnss_dns.so.* "$dir"/libnss_mdns4_minimal.so.*; do
+ [ -e "$i" ] && dracut_install "$i"
+ done
+ done
+
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# ifcfg is required by network
-#[[ $1 = -d ]] && echo network
-
-exit 255
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
-[[ $1 = '-h' ]] && {
- [ -x "/usr/sbin/load_policy" -o -x "/sbin/load_policy" ] || exit 1
- exit 0
+check() {
+ return 255
}
-exit 0
+depends() {
+ return 0
+}
+
+install() {
+ inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
+}
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# TODO: splash_geninitramfs
-# TODO: /usr/share/splashutils/initrd.splash
-exit 255
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-call_splash_geninitramfs() {
- local out ret
-
- out=$(splash_geninitramfs -c "$1" ${@:2} 2>&1)
- ret=$?
-
- if [[ ${out} ]]; then
- local IFS='
-'
- for line in ${out}; do
- if [[ ${line} =~ ^Warning ]]; then
- dwarning "${line}"
- else
- derror "${line}"
- (( ret == 0 )) && ret=1
- fi
- done
- fi
-
- return ${ret}
-}
-
-
-type -P splash_geninitramfs >/dev/null || exit 1
-
-opts=''
-
-if [[ ${DRACUT_GENSPLASH_THEME} ]]; then
- # Variables from the environment
- # They're supposed to be set up by e.g. Genkernel in basis of cmdline args.
- # If user set them he/she would expect to be included only given theme
- # rather then all even if we're building generic initramfs.
- SPLASH_THEME=${DRACUT_GENSPLASH_THEME}
- SPLASH_RES=${DRACUT_GENSPLASH_RES}
-elif [[ ${hostonly} ]]; then
- # Settings from config only in hostonly
- [[ -e /etc/conf.d/splash ]] && source /etc/conf.d/splash
- [[ ! ${SPLASH_THEME} ]] && SPLASH_THEME=default
- [[ ${SPLASH_RES} ]] && opts+=" -r ${SPLASH_RES}"
-else
- # generic
- SPLASH_THEME=--all
-fi
-
-dinfo "Installing Gentoo Splash (using the ${SPLASH_THEME} theme)"
-
-pushd "${initdir}" >/dev/null
-mv dev dev.old
-call_splash_geninitramfs "${initdir}" ${opts} ${SPLASH_THEME} || {
- derror "Could not build splash"
- exit 1
-}
-rm -rf dev
-mv dev.old dev
-popd >/dev/null
-
-dracut_install chvt
-inst /usr/share/splashutils/initrd.splash /lib/gensplash-lib.sh
-inst_hook pre-pivot 90 "${moddir}"/gensplash-newroot.sh
-inst_hook pre-trigger 10 "${moddir}"/gensplash-pretrigger.sh
-inst_hook emergency 50 "${moddir}"/gensplash-emergency.sh
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # TODO: splash_geninitramfs
+ # TODO: /usr/share/splashutils/initrd.splash
+ return 255
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ call_splash_geninitramfs() {
+ local out ret
+
+ out=$(splash_geninitramfs -c "$1" ${@:2} 2>&1)
+ ret=$?
+
+ if [[ ${out} ]]; then
+ local IFS='
+'
+ for line in ${out}; do
+ if [[ ${line} =~ ^Warning ]]; then
+ dwarning "${line}"
+ else
+ derror "${line}"
+ (( ret == 0 )) && ret=1
+ fi
+ done
+ fi
+
+ return ${ret}
+ }
+
+
+ type -P splash_geninitramfs >/dev/null || return 1
+
+ opts=''
+
+ if [[ ${DRACUT_GENSPLASH_THEME} ]]; then
+ # Variables from the environment
+ # They're supposed to be set up by e.g. Genkernel in basis of cmdline args.
+ # If user set them he/she would expect to be included only given theme
+ # rather then all even if we're building generic initramfs.
+ SPLASH_THEME=${DRACUT_GENSPLASH_THEME}
+ SPLASH_RES=${DRACUT_GENSPLASH_RES}
+ elif [[ ${hostonly} ]]; then
+ # Settings from config only in hostonly
+ [[ -e /etc/conf.d/splash ]] && source /etc/conf.d/splash
+ [[ ! ${SPLASH_THEME} ]] && SPLASH_THEME=default
+ [[ ${SPLASH_RES} ]] && opts+=" -r ${SPLASH_RES}"
+ else
+ # generic
+ SPLASH_THEME=--all
+ fi
+
+ dinfo "Installing Gentoo Splash (using the ${SPLASH_THEME} theme)"
+
+ pushd "${initdir}" >/dev/null
+ mv dev dev.old
+ call_splash_geninitramfs "${initdir}" ${opts} ${SPLASH_THEME} || {
+ derror "Could not build splash"
+ return 1
+ }
+ rm -rf dev
+ mv dev.old dev
+ popd >/dev/null
+
+ dracut_install chvt
+ inst /usr/share/splashutils/initrd.splash /lib/gensplash-lib.sh
+ inst_hook pre-pivot 90 "${moddir}"/gensplash-newroot.sh
+ inst_hook pre-trigger 10 "${moddir}"/gensplash-pretrigger.sh
+ inst_hook emergency 50 "${moddir}"/gensplash-emergency.sh
+}
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-[[ $1 = -d ]] && type -P cryptsetup >/dev/null && echo crypt
-[[ -x /sbin/plymouthd && -x /bin/plymouth && -x /usr/sbin/plymouth-set-default-theme ]]
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
- || ! grep -q PLYMOUTH_POPULATE_SOURCE_FUNCTIONS /usr/libexec/plymouth/plymouth-populate-initrd \
- || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
- . "$moddir"/plymouth-populate-initrd
-else
- PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
- /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
-fi
-
-inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
-inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
-inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
-inst readlink
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-# Include KMS capable drm drivers
-for modname in $(find "$srcmods/kernel/drivers/gpu/drm" "$srcmods/extra" -name '*.ko' 2>/dev/null); do
- grep -q drm_crtc_init $modname && instmods $modname
-done
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ [[ -x /sbin/plymouthd && -x /bin/plymouth && -x /usr/sbin/plymouth-set-default-theme ]]
+}
+
+depends() {
+ return 0
+}
+
+installkernel() {
+ # Include KMS capable drm drivers
+ for modname in $(find "$srcmods/kernel/drivers/gpu/drm" "$srcmods/extra" -name '*.ko' 2>/dev/null); do
+ grep -q drm_crtc_init $modname && instmods $modname
+ done
+}
+
+install() {
+ if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
+ || ! grep -q PLYMOUTH_POPULATE_SOURCE_FUNCTIONS /usr/libexec/plymouth/plymouth-populate-initrd \
+ || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
+ . "$moddir"/plymouth-populate-initrd
+ else
+ PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
+ /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
+ fi
+
+ inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
+ inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
+ inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
+ inst readlink
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# No Xen-detect? Boo!!
-if ! hash xen-detect 2>/dev/null; then
- [[ -d /usr/lib/xen-default ]] && \
- hash -p /usr/lib/xen-default/bin/xen-detect xen-detect || exit 1
-fi
-
-. $dracutfunctions
-[[ $debug ]] && set -x
-
-# Yes, we are under Xen PV env.
-xen-detect | grep -q -v PV || exit 0
-
-exit 1
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-hash xen-detect 2>/dev/null || \
- hash -p /usr/lib/xen-default/bin/xen-detect xen-detect
-inst "$(hash -t xen-detect)" /sbin/xen-detect
-inst_hook pre-udev 40 "$moddir/xen-pre-udev.sh"
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-for i in \
- xenbus_probe_frontend xen-pcifront \
- xen-fbfront xen-kbdfront xen-blkfront xen-netfront \
- ; do
- modinfo -k $kernel $i >/dev/null 2>&1 && instmods $i
-done
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # No Xen-detect? Boo!!
+ if ! hash xen-detect 2>/dev/null; then
+ [[ -d /usr/lib/xen-default ]] && \
+ hash -p /usr/lib/xen-default/bin/xen-detect xen-detect || return 1
+ fi
+
+ . $dracutfunctions
+ [[ $debug ]] && set -x
+
+ # Yes, we are under Xen PV env.
+ xen-detect | grep -q -v PV || return 0
+
+ return 1
+}
+
+depends() {
+ return 0
+}
+
+installkernel() {
+ for i in \
+ xenbus_probe_frontend xen-pcifront \
+ xen-fbfront xen-kbdfront xen-blkfront xen-netfront \
+ ; do
+ modinfo -k $kernel $i >/dev/null 2>&1 && instmods $i
+ done
+
+}
+
+install() {
+ hash xen-detect 2>/dev/null || \
+ hash -p /usr/lib/xen-default/bin/xen-detect xen-detect
+ inst "$(hash -t xen-detect)" /sbin/xen-detect
+ inst_hook pre-udev 40 "$moddir/xen-pre-udev.sh"
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# We depend on udev-rules being loaded
-[[ "$1" = "-d" ]] && exit 0
-
-# if we don't have btrfs (btrfsctl) installed on the host system,
-# no point in trying to support it in the initramfs.
-type -P btrfsctl >/dev/null || exit 1
-
-. $dracutfunctions
-[[ $debug ]] && set -x
-
-is_btrfs() { get_fs_type /dev/block/$1 |grep -q btrfs; }
-
-if [[ "$1" = "-h" ]]; then
- rootdev=$(find_root_block_device)
- if [[ $rootdev ]]; then
- is_btrfs "$rootdev" || exit 1
- fi
-fi
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-inst_rules "$moddir/80-btrfs.rules"
-dracut_install btrfsctl
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # if we don't have btrfs (btrfsctl) installed on the host system,
+ # no point in trying to support it in the initramfs.
+ type -P btrfsctl >/dev/null || return 1
+
+ . $dracutfunctions
+ [[ $debug ]] && set -x
+
+ is_btrfs() { get_fs_type /dev/block/$1 | grep -q btrfs; }
+
+ if [[ $hostonly ]]; then
+ rootdev=$(find_root_block_device)
+ if [[ $rootdev ]]; then
+ is_btrfs "$rootdev" || return 1
+ fi
+ fi
+
+ return 0
+}
+
+depends() {
+ echo udev-rules
+ return 0
+}
+
+install() {
+ inst_rules "$moddir/80-btrfs.rules"
+ dracut_install btrfsctl
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# if cryptsetup is not installed, then we cannot support encrypted devices.
-type -P cryptsetup >/dev/null || exit 1
-
-[ "$1" = "-d" ] && echo dm
-
-. $dracutfunctions
-
-is_crypt() { [[ $(get_fs_type /dev/block/$1) = crypto_LUKS ]]; }
-
-[[ $1 = '-h' ]] && {
- rootdev=$(find_root_block_device)
- if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_crypt "$rootdev" || exit 1
- else
- # root is not on a block device, use the shotgun approach
- blkid | grep -q crypto\?_LUKS || exit 1
- fi
-}
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-inst cryptsetup
-inst rmdir
-inst readlink
-inst "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
-inst "$moddir"/probe-keydev.sh /sbin/probe-keydev
-inst_hook cmdline 10 "$moddir/parse-keydev.sh"
-inst_hook cmdline 30 "$moddir/parse-crypt.sh"
-inst_hook pre-pivot 30 "$moddir/crypt-cleanup.sh"
-inst /etc/crypttab
-inst "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh"
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-instmods dm_crypt cbc sha256 xts aes aes_generic aesni-intel aes-x86_64 fpu
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # if cryptsetup is not installed, then we cannot support encrypted devices.
+ type -P cryptsetup >/dev/null || return 1
+
+ . $dracutfunctions
+
+ is_crypt() { [[ $(get_fs_type /dev/block/$1) = crypto_LUKS ]]; }
+
+ [[ $hostonly ]] && {
+ rootdev=$(find_root_block_device)
+ if [[ $rootdev ]]; then
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_crypt "$rootdev" || return 1
+ else
+ # root is not on a block device, use the shotgun approach
+ blkid | grep -q crypto\?_LUKS || return 1
+ fi
+ }
+
+ return 0
+}
+
+depends() {
+ echo dm rootfs-block
+ return 0
+}
+
+installkernel() {
+ instmods dm_crypt cbc sha256 xts aes aes_generic aesni-intel aes-x86_64 fpu
+
+}
+
+install() {
+ inst cryptsetup
+ inst rmdir
+ inst readlink
+ inst "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
+ inst "$moddir"/probe-keydev.sh /sbin/probe-keydev
+ inst_hook cmdline 10 "$moddir/parse-keydev.sh"
+ inst_hook cmdline 30 "$moddir/parse-crypt.sh"
+ inst_hook pre-pivot 30 "$moddir/crypt-cleanup.sh"
+ inst /etc/crypttab
+ inst "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh"
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-exit 255
-
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-modinfo -k $kernel dm_mod >/dev/null 2>&1 && \
- inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh"
-
-inst dmsetup
-
-type -P dmeventd >/dev/null && dracut_install dmeventd
-inst_rules 10-dm.rules 95-dm-notify.rules
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-instmods =drivers/md
-
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ return 255
+}
+
+depends() {
+ return 0
+}
+
+installkernel() {
+ instmods =drivers/md
+}
+
+install() {
+ modinfo -k $kernel dm_mod >/dev/null 2>&1 && \
+ inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh"
+
+ inst dmsetup
+
+ type -P dmeventd >/dev/null && dracut_install dmeventd
+ inst_rules 10-dm.rules 95-dm-notify.rules
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# We depend on dm_mod being loaded
-[ "$1" = "-d" ] && echo dm
-
-# if we don't have dmraid installed on the host system, no point
-# in trying to support it in the initramfs.
-type -P dmraid >/dev/null || exit 1
-
-. $dracutfunctions
-[[ $debug ]] && set -x
-
-is_dmraid() { get_fs_type /dev/block/$1 |grep -v linux_raid_member | \
- grep -q _raid_member; }
-
-[[ $1 = '-h' ]] && {
- rootdev=$(find_root_block_device)
- if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_dmraid "$rootdev" || exit 1
- else
- # root is not on a block device, use the shotgun approach
- dmraid -r | grep -q ok || exit 1
- fi
-}
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-dracut_install dmraid partx kpartx
-
-inst dmeventd
-
-for i in {"$libdir","$usrlibdir"}/libdmraid-events*.so; do
- [ -e "$i" ] && dracut_install "$i"
-done
-
-inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules
-
-inst "$moddir/dmraid.sh" /sbin/dmraid_scan
-
-if [ ! -x /lib/udev/vol_id ]; then
- inst_rules 64-md-raid.rules
-fi
-
-inst_rules "$moddir/61-dmraid-imsm.rules"
-inst "$moddir/dmraid-cleanup.sh" /sbin/dmraid-cleanup
-inst_hook pre-trigger 30 "$moddir/parse-dm.sh"
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # if we don't have dmraid installed on the host system, no point
+ # in trying to support it in the initramfs.
+ type -P dmraid >/dev/null || return 1
+
+ . $dracutfunctions
+ [[ $debug ]] && set -x
+
+ is_dmraid() { get_fs_type /dev/block/$1 |grep -v linux_raid_member | \
+ grep -q _raid_member; }
+
+ [[ $hostonly ]] && {
+ rootdev=$(find_root_block_device)
+ if [[ $rootdev ]]; then
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_dmraid "$rootdev" || return 1
+ else
+ # root is not on a block device, use the shotgun approach
+ dmraid -r | grep -q ok || return 1
+ fi
+ }
+
+ return 0
+}
+
+depends() {
+ echo dm rootfs-block
+ return 0
+}
+
+install() {
+ dracut_install dmraid partx kpartx
+
+ inst dmeventd
+
+ for i in {"$libdir","$usrlibdir"}/libdmraid-events*.so; do
+ [ -e "$i" ] && dracut_install "$i"
+ done
+
+ inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules
+
+ inst "$moddir/dmraid.sh" /sbin/dmraid_scan
+
+ if [ ! -x /lib/udev/vol_id ]; then
+ inst_rules 64-md-raid.rules
+ fi
+
+ inst_rules "$moddir/61-dmraid-imsm.rules"
+ inst "$moddir/dmraid-cleanup.sh" /sbin/dmraid-cleanup
+ inst_hook pre-trigger 30 "$moddir/parse-dm.sh"
+
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# if dmsetup is not installed, then we cannot support fedora/red hat
-# style live images
-if [ "$1" = "-d" ]; then
- echo dm
- exit 0
-fi
-
-# a live host-only image doesn't really make a lot of sense
-if [ "$1" = "-h" ] ; then
- exit 1
-fi
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-dracut_install umount
-inst dmsetup
-inst blkid
-inst dd
-inst losetup
-inst grep
-
-# eject might be a symlink to consolehelper
-if [ -L /usr/bin/eject ]; then
- dracut_install /usr/sbin/eject
-else
- inst eject
-fi
-
-inst blockdev
-type -P checkisomd5 >/dev/null && inst checkisomd5
-inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
-inst_hook pre-udev 30 "$moddir/dmsquash-live-genrules.sh"
-inst_hook pre-udev 30 "$moddir/dmsquash-liveiso-genrules.sh"
-inst "$moddir/dmsquash-live-root" "/sbin/dmsquash-live-root"
-# should probably just be generally included
-inst_rules 60-cdrom_id.rules
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # a live host-only image doesn't really make a lot of sense
+ [[ $hostonly ]] && return 1
+ return 0
+}
+
+depends() {
+ # if dmsetup is not installed, then we cannot support fedora/red hat
+ # style live images
+ echo dm rootfs-block
+ return 0
+}
+
+install() {
+ dracut_install umount
+ inst dmsetup
+ inst blkid
+ inst dd
+ inst losetup
+ inst grep
+
+ # eject might be a symlink to consolehelper
+ if [ -L /usr/bin/eject ]; then
+ dracut_install /usr/sbin/eject
+ else
+ inst eject
+ fi
+
+ inst blockdev
+ type -P checkisomd5 >/dev/null && inst checkisomd5
+ inst_hook cmdline 30 "$moddir/parse-dmsquash-live.sh"
+ inst_hook pre-udev 30 "$moddir/dmsquash-live-genrules.sh"
+ inst_hook pre-udev 30 "$moddir/dmsquash-liveiso-genrules.sh"
+ inst "$moddir/dmsquash-live-root" "/sbin/dmsquash-live-root"
+ # should probably just be generally included
+ inst_rules 60-cdrom_id.rules
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-[ -f /etc/modprobe.conf ] && dracut_install /etc/modprobe.conf
-dracut_install $(find /etc/modprobe.d/ -type f -name '*.conf')
-inst_hook cmdline 01 "$moddir/parse-kernel.sh"
-inst "$srcmods/modules.builtin.bin" "/lib/modules/$kernel/modules.builtin.bin"
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-if [[ -z $drivers ]]; then
- block_module_test() {
- local blockfuncs='ahci_init_controller|ata_scsi_ioctl|scsi_add_host|blk_init_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device'
-
- egrep -q "$blockfuncs" "$1"
- }
- hostonly='' instmods sr_mod sd_mod scsi_dh scsi_dh_rdac scsi_dh_emc
- hostonly='' instmods pcmcia firewire-ohci
- hostonly='' instmods usb_storage sdhci sdhci-pci
-
- # install keyboard support
- hostonly='' instmods atkbd i8042 usbhid hid-apple hid-sunplus ehci-hcd ohci-hcd uhci-hcd
-
- instmods "=drivers/pcmcia" =ide "=drivers/usb/storage"
- instmods $(filter_kernel_modules block_module_test)
- # if not on hostonly mode, install all known filesystems if the required list is not set via the filesystems variable
- if ! [[ $hostonly ]]; then
- if [[ -z $filesystems ]]; then
- instmods '=fs'
- # hardcoded list of exceptions
- # to save a lot of space
- rm -fr ${initdir}/lib/modules/*/kernel/fs/ocfs2
- else
- instmods $filesystems
- fi
- else
- hostonly='' instmods $(get_fs_type "/dev/block/$(find_root_block_device)")
- fi
-else
- hostonly='' instmods $drivers $filesystems
-fi
-
-[[ $add_drivers ]] && hostonly='' instmods $add_drivers
-
-# force install of scsi_wait_scan
-hostonly='' instmods scsi_wait_scan
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+installkernel() {
+ if [[ -z $drivers ]]; then
+ block_module_test() {
+ local blockfuncs='ahci_init_controller|ata_scsi_ioctl|scsi_add_host|blk_init_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device'
+
+ egrep -q "$blockfuncs" "$1"
+ }
+ hostonly='' instmods sr_mod sd_mod scsi_dh scsi_dh_rdac scsi_dh_emc
+ hostonly='' instmods pcmcia firewire-ohci
+ hostonly='' instmods usb_storage sdhci sdhci-pci
+
+ # install keyboard support
+ hostonly='' instmods atkbd i8042 usbhid hid-apple hid-sunplus ehci-hcd ohci-hcd uhci-hcd
+
+ instmods "=drivers/pcmcia" =ide "=drivers/usb/storage"
+ instmods $(filter_kernel_modules block_module_test)
+ # if not on hostonly mode, install all known filesystems,
+ # if the required list is not set via the filesystems variable
+ if ! [[ $hostonly ]]; then
+ if [[ -z $filesystems ]]; then
+ instmods '=fs'
+ # hardcoded list of exceptions
+ # to save a lot of space
+ rm -fr ${initdir}/lib/modules/*/kernel/fs/ocfs2
+ else
+ instmods $filesystems
+ fi
+ else
+ hostonly='' instmods $(get_fs_type "/dev/block/$(find_root_block_device)")
+ fi
+ else
+ hostonly='' instmods $drivers $filesystems
+ fi
+
+ [[ $add_drivers ]] && hostonly='' instmods $add_drivers
+
+ # force install of scsi_wait_scan
+ hostonly='' instmods scsi_wait_scan
+}
+
+install() {
+ [ -f /etc/modprobe.conf ] && dracut_install /etc/modprobe.conf
+ dracut_install $(find /etc/modprobe.d/ -type f -name '*.conf')
+ inst_hook cmdline 01 "$moddir/parse-kernel.sh"
+ inst "$srcmods/modules.builtin.bin" "/lib/modules/$kernel/modules.builtin.bin"
+}
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# We depend on dm_mod being loaded
-[ "$1" = "-d" ] && echo dm
-
-# No point trying to support lvm if the binaries are missing
-type -P lvm >/dev/null || exit 1
-
-. $dracutfunctions
-[[ $debug ]] && set -x
-
-is_lvm() { [[ $(get_fs_type /dev/block/$1) = LVM2_member ]]; }
-
-[[ $1 = '-h' ]] && {
- rootdev=$(find_root_block_device)
- if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_lvm "$rootdev" || exit 1
- else
- # root is not on a block device, use the shotgun approach
- blkid | grep -q LVM2_member || exit 1
- fi
-}
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-inst lvm
-
-inst_rules "$moddir/64-lvm.rules"
-
-if [[ $hostonly ]] || [[ $lvmconf = "yes" ]]; then
- if [ -f /etc/lvm/lvm.conf ]; then
- inst /etc/lvm/lvm.conf
- # FIXME: near-term hack to establish read-only locking;
- # use command-line lvm.conf editor once it is available
- sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf
- fi
-fi
-
-inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules 11-dm-lvm.rules
-
-inst "$moddir/lvm_scan.sh" /sbin/lvm_scan
-inst_hook cmdline 30 "$moddir/parse-lvm.sh"
-
-for i in {"$libdir","$usrlibdir"}/libdevmapper-event-lvm*.so; do
- [ -e "$i" ] && dracut_install "$i"
-done
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # No point trying to support lvm if the binaries are missing
+ type -P lvm >/dev/null || return 1
+
+ . $dracutfunctions
+ [[ $debug ]] && set -x
+
+ is_lvm() { [[ $(get_fs_type /dev/block/$1) = LVM2_member ]]; }
+
+ [[ $hostonly ]] && {
+ rootdev=$(find_root_block_device)
+ if [[ $rootdev ]]; then
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_lvm "$rootdev" || return 1
+ else
+ # root is not on a block device, use the shotgun approach
+ blkid | grep -q LVM2_member || return 1
+ fi
+ }
+
+ return 0
+}
+
+depends() {
+ # We depend on dm_mod being loaded
+ echo rootfs-block dm
+ return 0
+}
+
+install() {
+ inst lvm
+
+ inst_rules "$moddir/64-lvm.rules"
+
+ if [[ $hostonly ]] || [[ $lvmconf = "yes" ]]; then
+ if [ -f /etc/lvm/lvm.conf ]; then
+ inst /etc/lvm/lvm.conf
+ # FIXME: near-term hack to establish read-only locking;
+ # use command-line lvm.conf editor once it is available
+ sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf
+ fi
+ fi
+
+ inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules 11-dm-lvm.rules
+
+ inst "$moddir/lvm_scan.sh" /sbin/lvm_scan
+ inst_hook cmdline 30 "$moddir/parse-lvm.sh"
+
+ for i in {"$libdir","$usrlibdir"}/libdevmapper-event-lvm*.so; do
+ [ -e "$i" ] && dracut_install "$i"
+ done
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# No mdadm? No mdraid support.
-type -P mdadm >/dev/null || exit 1
-
-. $dracutfunctions
-[[ $debug ]] && set -x
-
-is_mdraid() { [[ -d "/sys/dev/block/$1/md" ]]; }
-
-[[ $1 = '-h' ]] && {
- rootdev=$(find_root_block_device)
- if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_mdraid "$rootdev" || exit 1
- else
- # root is not on a block device, use the shotgun approach
- blkid | egrep -q '(linux|isw)_raid' || exit 1
- fi
-}
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-dracut_install mdadm partx
-
-
-# XXX: mdmon really needs to run as non-root?
-# If so, write only the user it needs in the initrd's /etc/passwd (and maybe /etc/group)
-# in a similar fashion to modules.d/95nfs. Do not copy /etc/passwd and /etc/group from
-# the system into the initrd.
-# dledford has hardware to test this, so he should be able to clean this up.
-# inst /etc/passwd
-# inst /etc/group
-
-if [ ! -x /lib/udev/vol_id ]; then
- inst_rules 64-md-raid.rules
-fi
-
-inst_rules "$moddir/65-md-incremental-imsm.rules"
-
-if ! mdadm -Q -e imsm /dev/null &> /dev/null; then
- inst_hook pre-trigger 30 "$moddir/md-noimsm.sh"
-fi
-
-if [[ $hostonly ]] || [[ $mdadmconf = "yes" ]]; then
- if [ -f /etc/mdadm.conf ]; then
- inst /etc/mdadm.conf
- else
- [ -f /etc/mdadm/mdadm.conf ] && inst /etc/mdadm/mdadm.conf /etc/mdadm.conf
- fi
-fi
-
-if [ -x /sbin/mdmon ] ; then
- dracut_install mdmon
-fi
-inst_hook pre-udev 30 "$moddir/mdmon-pre-udev.sh"
-
-inst "$moddir/mdraid_start.sh" /sbin/mdraid_start
-inst "$moddir/mdcontainer_start.sh" /sbin/mdcontainer_start
-inst "$moddir/mdadm_auto.sh" /sbin/mdadm_auto
-inst "$moddir/md_finished.sh" /sbin/md_finished.sh
-inst_hook pre-trigger 30 "$moddir/parse-md.sh"
-inst "$moddir/mdraid-cleanup.sh" /sbin/mdraid-cleanup
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-instmods =drivers/md
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # No mdadm? No mdraid support.
+ type -P mdadm >/dev/null || return 1
+
+ . $dracutfunctions
+ [[ $debug ]] && set -x
+
+ is_mdraid() { [[ -d "/sys/dev/block/$1/md" ]]; }
+
+ [[ $hostonly ]] && {
+ rootdev=$(find_root_block_device)
+ if [[ $rootdev ]]; then
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_mdraid "$rootdev" || return 1
+ else
+ # root is not on a block device, use the shotgun approach
+ blkid | egrep -q '(linux|isw)_raid' || return 1
+ fi
+ }
+
+ return 0
+}
+
+depends() {
+ echo rootfs-block
+ return 0
+}
+
+installkernel() {
+ instmods =drivers/md
+}
+
+install() {
+ dracut_install mdadm partx
+
+
+ # XXX: mdmon really needs to run as non-root?
+ # If so, write only the user it needs in the initrd's /etc/passwd (and maybe /etc/group)
+ # in a similar fashion to modules.d/95nfs. Do not copy /etc/passwd and /etc/group from
+ # the system into the initrd.
+ # dledford has hardware to test this, so he should be able to clean this up.
+ # inst /etc/passwd
+ # inst /etc/group
+
+ if [ ! -x /lib/udev/vol_id ]; then
+ inst_rules 64-md-raid.rules
+ fi
+
+ inst_rules "$moddir/65-md-incremental-imsm.rules"
+
+ if ! mdadm -Q -e imsm /dev/null &> /dev/null; then
+ inst_hook pre-trigger 30 "$moddir/md-noimsm.sh"
+ fi
+
+ if [[ $hostonly ]] || [[ $mdadmconf = "yes" ]]; then
+ if [ -f /etc/mdadm.conf ]; then
+ inst /etc/mdadm.conf
+ else
+ [ -f /etc/mdadm/mdadm.conf ] && inst /etc/mdadm/mdadm.conf /etc/mdadm.conf
+ fi
+ fi
+
+ if [ -x /sbin/mdmon ] ; then
+ dracut_install mdmon
+ fi
+ inst_hook pre-udev 30 "$moddir/mdmon-pre-udev.sh"
+
+ inst "$moddir/mdraid_start.sh" /sbin/mdraid_start
+ inst "$moddir/mdcontainer_start.sh" /sbin/mdcontainer_start
+ inst "$moddir/mdadm_auto.sh" /sbin/mdadm_auto
+ inst "$moddir/md_finished.sh" /sbin/md_finished.sh
+ inst_hook pre-trigger 30 "$moddir/parse-md.sh"
+ inst "$moddir/mdraid-cleanup.sh" /sbin/mdraid-cleanup
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# if there's no multipath binary, no go.
-type -P multipath >/dev/null || exit 1
-
-[[ $1 = -d ]] && exit 0
-
-. $dracutfunctions
-[[ $debug ]] && set -x
-
-is_mpath() {
- [ -e /sys/dev/block/$1/dm/uuid ] || return 1
- [[ $(cat /sys/dev/block/$1/dm/uuid) =~ ^mpath- ]] && return 0
- return 1
-}
-
-if [[ $1 = -h ]]; then
- rootdev=$(find_root_block_device)
- if [[ $rootdev ]]; then
- check_block_and_slaves is_mpath "$rootdev" && exit 0
- fi
- exit 1
-fi
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-for f in \
- /sbin/dmsetup \
- /sbin/kpartx \
- /sbin/mpath_wait \
- /sbin/multipath \
- /sbin/multipathd \
- /sbin/xdrgetuid \
- /sbin/xdrgetprio \
- /etc/xdrdevices.conf \
- /etc/multipath.conf \
- /etc/multipath/* \
- "$libdir"/libmultipath* "$libdir"/multipath/*; do
- [ -e "$f" ] && inst "$f"
-done
-
-inst_hook pre-trigger 02 "$moddir/multipathd.sh"
-inst_hook pre-pivot 02 "$moddir/multipathd-stop.sh"
-inst_rules 40-multipath.rules
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-mp_mod_test() {
- local mpfuncs='scsi_register_device_handler|dm_dirty_log_type_register|dm_register_path_selector|dm_register_target'
- egrep -q "$mpfuncs" "$1"
-}
-
-instmods $(filter_kernel_modules mp_mod_test)
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # if there's no multipath binary, no go.
+ type -P multipath >/dev/null || return 1
+
+ . $dracutfunctions
+ [[ $debug ]] && set -x
+
+ is_mpath() {
+ [ -e /sys/dev/block/$1/dm/uuid ] || return 1
+ [[ $(cat /sys/dev/block/$1/dm/uuid) =~ ^mpath- ]] && return 0
+ return 1
+ }
+
+ if [[ $hostonly ]]; then
+ rootdev=$(find_root_block_device)
+ if [[ $rootdev ]]; then
+ check_block_and_slaves is_mpath "$rootdev" && return 0
+ fi
+ return 1
+ fi
+
+ return 0
+}
+
+depends() {
+ echo rootfs-block
+ return 0
+}
+
+installkernel() {
+ mp_mod_test() {
+ local mpfuncs='scsi_register_device_handler|dm_dirty_log_type_register|dm_register_path_selector|dm_register_target'
+ egrep -q "$mpfuncs" "$1"
+ }
+
+ instmods $(filter_kernel_modules mp_mod_test)
+}
+
+install() {
+ for f in \
+ /sbin/dmsetup \
+ /sbin/kpartx \
+ /sbin/mpath_wait \
+ /sbin/multipath \
+ /sbin/multipathd \
+ /sbin/xdrgetuid \
+ /sbin/xdrgetprio \
+ /etc/xdrdevices.conf \
+ /etc/multipath.conf \
+ /etc/multipath/* \
+ "$libdir"/libmultipath* "$libdir"/multipath/*; do
+ [ -e "$f" ] && inst "$f"
+ done
+
+ inst_hook pre-trigger 02 "$moddir/multipathd.sh"
+ inst_hook pre-pivot 02 "$moddir/multipathd-stop.sh"
+ inst_rules 40-multipath.rules
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-arch=$(uname -m)
-[ "$arch" = "s390" -o "$arch" = "s390x" ] || exit 1
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-inst_hook cmdline 30 "$moddir/parse-dasd.sh"
-dracut_install tr dasdinfo dasdconf.sh
-if [[ $hostonly ]]; then
- inst /etc/dasd.conf
-fi
-inst_rules 56-dasd.rules
-inst_rules 59-dasd.rules
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-instmods dasd_mod dasd_eckd_mod dasd_fba_mod dasd_diag_mod
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ arch=$(uname -m)
+ [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
+ return 0
+}
+
+depends() {
+ return 0
+}
+
+installkernel() {
+ instmods dasd_mod dasd_eckd_mod dasd_fba_mod dasd_diag_mod
+}
+
+install() {
+ inst_hook cmdline 30 "$moddir/parse-dasd.sh"
+ dracut_install tr dasdinfo dasdconf.sh
+ if [[ $hostonly ]]; then
+ inst /etc/dasd.conf
+ fi
+ inst_rules 56-dasd.rules
+ inst_rules 59-dasd.rules
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-arch=$(uname -m)
-[ "$arch" = "s390" -o "$arch" = "s390x" ] || exit 1
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-inst_hook cmdline 31 "$moddir/parse-dasd-mod.sh"
-dracut_install dasd_cio_free grep sed seq
-
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-instmods dasd_mod dasd_eckd_mod dasd_fba_mod dasd_diag_mod
-
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ arch=$(uname -m)
+ [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
+
+ return 0
+}
+
+depends() {
+ return 0
+}
+
+installkernel() {
+ instmods dasd_mod dasd_eckd_mod dasd_fba_mod dasd_diag_mod
+}
+
+install() {
+ inst_hook cmdline 31 "$moddir/parse-dasd-mod.sh"
+ dracut_install dasd_cio_free grep sed seq
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# do not add this module by default
-exit 1
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-dracut_install -o ps grep more cat rm strace free showmount
-dracut_install -o ping netstat rpcinfo vi scp ping6 ssh
-dracut_install -o fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # do not add this module by default
+ return 255
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ dracut_install -o ps grep more cat rm strace free showmount
+ dracut_install -o ping netstat rpcinfo vi scp ping6 ssh
+ dracut_install -o fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat e2fsck
+
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# We depend on network modules being loaded
-[ "$1" = "-d" ] && echo network
-
-# FIXME
-# If hostonly was requested, fail the check until we have some way of
-# knowing we are booting from FCoE
-[ "$1" = "-h" ] && exit 1
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-dracut_install ip
-inst dcbtool
-inst fipvlan
-inst lldpad
-
-mkdir -p "$initdir/var/lib/lldpad"
-
-inst "$moddir/fcoe-up" "/sbin/fcoe-up"
-inst_hook pre-udev 60 "$moddir/fcoe-genrules.sh"
-inst_hook cmdline 99 "$moddir/parse-fcoe.sh"
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-instmods fcoe 8021q
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # FIXME
+ # If hostonly was requested, fail the check until we have some way of
+ # knowing we are booting from FCoE
+ [[ $hostonly ]] && return 1
+
+ return 0
+}
+
+depends() {
+ echo network rootfs-block
+ return 0
+}
+
+installkernel() {
+ instmods fcoe 8021q
+}
+
+install() {
+ dracut_install ip
+ inst dcbtool
+ inst fipvlan
+ inst lldpad
+
+ mkdir -p "$initdir/var/lib/lldpad"
+
+ inst "$moddir/fcoe-up" "/sbin/fcoe-up"
+ inst_hook pre-udev 60 "$moddir/fcoe-genrules.sh"
+ inst_hook cmdline 99 "$moddir/parse-fcoe.sh"
+}
+
+++ /dev/null
-#!/bin/sh
-test -f /etc/fstab.sys
+++ /dev/null
-#!/bin/sh
-dracut_install /etc/fstab.sys
-inst_hook pre-pivot 00 "$moddir/mount-sys.sh"
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ test -f /etc/fstab.sys
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ dracut_install /etc/fstab.sys
+ inst_hook pre-pivot 00 "$moddir/mount-sys.sh"
+}
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# We depend on network modules being loaded
-[ "$1" = "-d" ] && echo network
-
-# If our prerequisites are not met, fail anyways.
-type -P iscsistart hostname iscsi-iname >/dev/null || exit 1
-
-# If hostonly was requested, fail the check if we are not actually
-# booting from root.
-
-. $dracutfunctions
-
-[[ $debug ]] && set -x
-
-is_iscsi() (
- [[ -L /sys/dev/block/$1 ]] || return
- cd "$(readlink -f /sys/dev/block/$1)"
- until [[ -d sys || -d iscsi_session ]]; do
- cd ..
- done
- [[ -d iscsi_session ]]
-)
-
-case $1 in
- -h) rootdev=$(find_root_block_device)
- if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_iscsi "$rootdev" || exit 1
- else
- exit 1
- fi ;;
-esac
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-dracut_install umount
-inst iscsistart
-inst hostname
-inst iscsi-iname
-inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
-inst "$moddir/iscsiroot" "/sbin/iscsiroot"
-inst "$moddir/mount-lun.sh" "/bin/mount-lun.sh"
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-instmods iscsi_tcp crc32c iscsi_ibft
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # If our prerequisites are not met, fail anyways.
+ type -P iscsistart hostname iscsi-iname >/dev/null || return 1
+
+ # If hostonly was requested, fail the check if we are not actually
+ # booting from root.
+
+ . $dracutfunctions
+
+ [[ $debug ]] && set -x
+
+ is_iscsi() (
+ [[ -L /sys/dev/block/$1 ]] || return
+ cd "$(readlink -f /sys/dev/block/$1)"
+ until [[ -d sys || -d iscsi_session ]]; do
+ cd ..
+ done
+ [[ -d iscsi_session ]]
+ )
+
+ [[ $hostonly ]] && {
+ rootdev=$(find_root_block_device)
+ if [[ $rootdev ]]; then
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_iscsi "$rootdev" || return 1
+ else
+ return 1
+ fi
+ }
+ return 0
+}
+
+depends() {
+ echo network rootfs-block
+}
+
+installkernel() {
+ instmods iscsi_tcp crc32c iscsi_ibft
+}
+
+install() {
+ dracut_install umount
+ inst iscsistart
+ inst hostname
+ inst iscsi-iname
+ inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
+ inst "$moddir/iscsiroot" "/sbin/iscsiroot"
+ inst "$moddir/mount-lun.sh" "/bin/mount-lun.sh"
+}
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-# We depend on network modules being loaded
-[ "$1" = "-d" ] && echo network
-
-# If our prerequisites are not met, fail.
-type -P nbd-client >/dev/null || exit 1
-
-# if an nbd device is not somewhere in the chain of devices root is mounted on,
-# fail the hostonly check.
-[ "$1" = "-h" ] && {
- is_nbd() { [[ -b /dev/block/$1 && $1 == 43:* ]] ;}
- . $dracutfunctions
-
- rootdev=$(find_root_block_device)
- [[ -b /dev/block/$rootdev ]] || exit 1
- check_block_and_slaves is_nbd "$rootdev" || exit 1
-}
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-inst nbd-client
-inst_hook cmdline 90 "$moddir/parse-nbdroot.sh"
-
-inst "$moddir/nbdroot" "/sbin/nbdroot"
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-instmods nbd
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # If our prerequisites are not met, fail.
+ type -P nbd-client >/dev/null || return 1
+
+ # if an nbd device is not somewhere in the chain of devices root is
+ # mounted on, fail the hostonly check.
+ [[ $hostonly ]] && {
+ is_nbd() { [[ -b /dev/block/$1 && $1 == 43:* ]] ;}
+ . $dracutfunctions
+
+ rootdev=$(find_root_block_device)
+ [[ -b /dev/block/$rootdev ]] || return 1
+ check_block_and_slaves is_nbd "$rootdev" || return 1
+ }
+
+ return 0
+}
+
+depends() {
+ # We depend on network modules being loaded
+ echo network rootfs-block
+}
+
+installkernel() {
+ instmods nbd
+}
+
+install() {
+ inst nbd-client
+ inst_hook cmdline 90 "$moddir/parse-nbdroot.sh"
+
+ inst "$moddir/nbdroot" "/sbin/nbdroot"
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# We depend on network modules being loaded
-[ "$1" = "-d" ] && echo network
-
-# If hostonly was requested, fail the check if we are not actually
-# booting from root.
-[ "$1" = "-h" ] && ! egrep -q '/ nfs[34 ]' /proc/mounts && exit 1
-
-# If our prerequisites are not met, fail anyways.
-type -P rpcbind >/dev/null || type -P portmap >/dev/null || exit 1
-type -P rpc.statd mount.nfs mount.nfs4 umount >/dev/null || exit 1
-exit 0
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-type -P portmap >/dev/null && dracut_install portmap
-type -P rpcbind >/dev/null && dracut_install rpcbind
-
-dracut_install rpc.statd mount.nfs mount.nfs4 umount
-[ -f /etc/netconfig ] && dracut_install /etc/netconfig
-dracut_install /etc/services
-dracut_install /etc/nsswitch.conf /etc/rpc /etc/protocols
-dracut_install rpc.idmapd /etc/idmapd.conf
-dracut_install sed
-
-for i in {"$libdir","$usrlibdir"}/libnfsidmap_nsswitch.so* \
- {"$libdir","$usrlibdir"}/libnfsidmap/*.so \
- {"$libdir","$usrlibdir"}/libnfsidmap*.so*; do
- [ -e "$i" ] && dracut_install "$i"
-done
-
-nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
- | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
-nsslibs=${nsslibs#|}
-nsslibs=${nsslibs%|}
-
-dracut_install $(for i in $(ls {/usr,}$libdir/libnss*.so 2>/dev/null); do echo $i;done | egrep "$nsslibs")
-
-inst_hook cmdline 90 "$moddir/parse-nfsroot.sh"
-inst_hook pre-pivot 99 "$moddir/nfsroot-cleanup.sh"
-inst "$moddir/nfsroot" "/sbin/nfsroot"
-mkdir -p "$initdir/var/lib/nfs/rpc_pipefs"
-mkdir -p "$initdir/var/lib/rpcbind"
-mkdir -p "$initdir/var/lib/nfs/statd/sm"
-
-# Rather than copy the passwd file in, just set a user for rpcbind
-# We'll save the state and restart the daemon from the root anyway
-egrep '^root:' "$initdir/etc/passwd" 2>/dev/null || echo 'root:x:0:0::/:/bin/sh' >> "$initdir/etc/passwd"
-egrep '^nobody:' /etc/passwd >> "$initdir/etc/passwd"
-egrep '^nfsnobody:' /etc/passwd >> "$initdir/etc/passwd"
-egrep '^rpc:' /etc/passwd >> "$initdir/etc/passwd"
-egrep '^rpcuser:' /etc/passwd >> "$initdir/etc/passwd"
-#type -P nologin >/dev/null && dracut_install nologin
-
-# rpc user needs to be able to write to this directory to save the warmstart
-# file
-chmod 777 "$initdir/var/lib/rpcbind"
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-instmods nfs sunrpc ipv6
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # If hostonly was requested, fail the check if we are not actually
+ # booting from root.
+ [ $hostonly ] && ! egrep -q '/ nfs[34 ]' /proc/mounts && return 1
+
+ # If our prerequisites are not met, fail anyways.
+ type -P rpcbind >/dev/null || type -P portmap >/dev/null || return 1
+ type -P rpc.statd mount.nfs mount.nfs4 umount >/dev/null || return 1
+ return 0
+}
+
+depends() {
+ # We depend on network modules being loaded
+ echo network
+}
+
+installkernel() {
+ instmods nfs sunrpc ipv6
+}
+
+install() {
+ type -P portmap >/dev/null && dracut_install portmap
+ type -P rpcbind >/dev/null && dracut_install rpcbind
+
+ dracut_install rpc.statd mount.nfs mount.nfs4 umount
+ [ -f /etc/netconfig ] && dracut_install /etc/netconfig
+ dracut_install /etc/services
+ dracut_install /etc/nsswitch.conf /etc/rpc /etc/protocols
+ dracut_install rpc.idmapd /etc/idmapd.conf
+ dracut_install sed
+
+ for i in {"$libdir","$usrlibdir"}/libnfsidmap_nsswitch.so* \
+ {"$libdir","$usrlibdir"}/libnfsidmap/*.so \
+ {"$libdir","$usrlibdir"}/libnfsidmap*.so*; do
+ [ -e "$i" ] && dracut_install "$i"
+ done
+
+ nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
+ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
+ nsslibs=${nsslibs#|}
+ nsslibs=${nsslibs%|}
+
+ dracut_install $(for i in $(ls {/usr,}$libdir/libnss*.so 2>/dev/null); do echo $i;done | egrep "$nsslibs")
+
+ inst_hook cmdline 90 "$moddir/parse-nfsroot.sh"
+ inst_hook pre-pivot 99 "$moddir/nfsroot-cleanup.sh"
+ inst "$moddir/nfsroot" "/sbin/nfsroot"
+ mkdir -p "$initdir/var/lib/nfs/rpc_pipefs"
+ mkdir -p "$initdir/var/lib/rpcbind"
+ mkdir -p "$initdir/var/lib/nfs/statd/sm"
+
+ # Rather than copy the passwd file in, just set a user for rpcbind
+ # We'll save the state and restart the daemon from the root anyway
+ egrep '^root:' "$initdir/etc/passwd" 2>/dev/null || echo 'root:x:0:0::/:/bin/sh' >> "$initdir/etc/passwd"
+ egrep '^nobody:' /etc/passwd >> "$initdir/etc/passwd"
+ egrep '^nfsnobody:' /etc/passwd >> "$initdir/etc/passwd"
+ egrep '^rpc:' /etc/passwd >> "$initdir/etc/passwd"
+ egrep '^rpcuser:' /etc/passwd >> "$initdir/etc/passwd"
+ #type -P nologin >/dev/null && dracut_install nologin
+
+ # rpc user needs to be able to write to this directory to save the warmstart
+ # file
+ chmod 777 "$initdir/var/lib/rpcbind"
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# Optional uswsusp support
-for bin in /usr/sbin/resume /usr/lib/suspend/resume
-do
- [[ -x "${bin}" ]] && {
- inst "${bin}" /usr/sbin/resume
- [[ -f /etc/suspend.conf ]] && inst /etc/suspend.conf
- break
- }
-done
-
-inst_hook cmdline 10 "$moddir/parse-resume.sh"
-inst_hook pre-udev 30 "$moddir/resume-genrules.sh"
-inst_hook mount 10 "$moddir/resume.sh"
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+install() {
+ # Optional uswsusp support
+ for bin in /usr/sbin/resume /usr/lib/suspend/resume
+ do
+ [[ -x "${bin}" ]] && {
+ inst "${bin}" /usr/sbin/resume
+ [[ -f /etc/suspend.conf ]] && inst /etc/suspend.conf
+ break
+ }
+ done
+
+ inst_hook cmdline 10 "$moddir/parse-resume.sh"
+ inst_hook pre-udev 30 "$moddir/resume-genrules.sh"
+ inst_hook mount 10 "$moddir/resume.sh"
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-dracut_install umount
-dracut_install /sbin/fsck*
-type -P e2fsck >/dev/null && dracut_install e2fsck
-inst_hook cmdline 95 "$moddir/parse-block.sh"
-inst_hook pre-udev 30 "$moddir/block-genrules.sh"
-inst_hook mount 99 "$moddir/mount-root.sh"
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+install() {
+ dracut_install umount
+ dracut_install /sbin/fsck*
+ type -P e2fsck >/dev/null && dracut_install e2fsck
+ inst_hook cmdline 95 "$moddir/parse-block.sh"
+ inst_hook pre-udev 30 "$moddir/block-genrules.sh"
+ inst_hook mount 99 "$moddir/mount-root.sh"
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# terminfo bits make things work better if you fall into interactive mode
-for TERMINFODIR in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
- [ -d ${TERMINFODIR} ] && break
-done
-
-[ -d ${TERMINFODIR} ] && \
- dracut_install $(find ${TERMINFODIR} -type f)
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+install() {
+ # terminfo bits make things work better if you fall into interactive mode
+ for TERMINFODIR in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
+ [ -d ${TERMINFODIR} ] && break
+ done
+
+ [ -d ${TERMINFODIR} ] && \
+ dracut_install $(find ${TERMINFODIR} -type f)
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# FIXME: would be nice if we didn't have to know which rules to grab....
-# ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
-# of the rules we want so that we just copy those in would be best
-dracut_install udevd udevadm /etc/udev/udev.conf /etc/group
-dracut_install basename
-inst_rules 50-udev-default.rules 60-persistent-storage.rules \
- 61-persistent-storage-edd.rules 80-drivers.rules 95-udev-late.rules \
- 60-pcmcia.rules
-#Some debian udev rules are named differently
-inst_rules 50-udev.rules 95-late.rules
-
-# ignore some devices in the initrd
-inst_rules "$moddir/01-ignore.rules"
-
-# for firmware loading
-inst_rules 50-firmware.rules
-dracut_install cat uname
-
-if [ ! -x /lib/udev/vol_id ]; then
- dracut_install blkid
- inst_rules "$moddir/59-persistent-storage.rules"
-else
- inst_rules "$moddir/59-persistent-storage-volid.rules"
-fi
-inst_rules "$moddir/61-persistent-storage.rules"
-
-for i in \
- ata_id \
- cdrom_id \
- create_floppy_devices \
- edd_id \
- firmware.sh \
- firmware \
- firmware.agent \
- hotplug.functions \
- fw_unit_symlinks.sh \
- hid2hci \
- path_id \
- scsi_id \
- usb_id \
- vol_id \
- pcmcia-socket-startup \
- pcmcia-check-broken-cis \
- ; do
- [ -e /lib/udev/$i ] && dracut_install /lib/udev/$i
-done
-
-[ -f /etc/arch-release ] && inst "$moddir/load-modules.sh" /lib/udev/load-modules.sh
-
-for i in {"$libdir","$usrlibdir"}/libnss_files*; do
- [ -e "$i" ] && dracut_install "$i"
-done
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+install() {
+ # FIXME: would be nice if we didn't have to know which rules to grab....
+ # ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
+ # of the rules we want so that we just copy those in would be best
+ dracut_install udevd udevadm /etc/udev/udev.conf /etc/group
+ dracut_install basename
+ inst_rules 50-udev-default.rules 60-persistent-storage.rules \
+ 61-persistent-storage-edd.rules 80-drivers.rules 95-udev-late.rules \
+ 60-pcmcia.rules
+ #Some debian udev rules are named differently
+ inst_rules 50-udev.rules 95-late.rules
+
+ # ignore some devices in the initrd
+ inst_rules "$moddir/01-ignore.rules"
+
+ # for firmware loading
+ inst_rules 50-firmware.rules
+ dracut_install cat uname
+
+ if [ ! -x /lib/udev/vol_id ]; then
+ dracut_install blkid
+ inst_rules "$moddir/59-persistent-storage.rules"
+ else
+ inst_rules "$moddir/59-persistent-storage-volid.rules"
+ fi
+ inst_rules "$moddir/61-persistent-storage.rules"
+
+ for i in \
+ ata_id \
+ cdrom_id \
+ create_floppy_devices \
+ edd_id \
+ firmware.sh \
+ firmware \
+ firmware.agent \
+ hotplug.functions \
+ fw_unit_symlinks.sh \
+ hid2hci \
+ path_id \
+ scsi_id \
+ usb_id \
+ vol_id \
+ pcmcia-socket-startup \
+ pcmcia-check-broken-cis \
+ ; do
+ [ -e /lib/udev/$i ] && dracut_install /lib/udev/$i
+ done
+
+ [ -f /etc/arch-release ] && \
+ inst "$moddir/load-modules.sh" /lib/udev/load-modules.sh
+
+ for i in {"$libdir","$usrlibdir"}/libnss_files*; do
+ [ -e "$i" ] && dracut_install "$i"
+ done
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-arch=$(uname -m)
-[ "$arch" = "s390" -o "$arch" = "s390x" ] || exit 1
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-inst_hook cmdline 30 "$moddir/parse-zfcp.sh"
-dracut_install tr
-
-inst /sbin/zfcpconf.sh
-inst_rules 56-zfcp.rules
-
-if [[ $hostonly ]]; then
- inst /etc/zfcp.conf
-fi
-dracut_install zfcp_cio_free grep sed seq
-
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-instmods zfcp
-
-
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ arch=$(uname -m)
+ [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
+
+ return 0
+}
+
+depends() {
+ arch=$(uname -m)
+ [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
+
+ return 0
+}
+
+installkernel() {
+ instmods zfcp
+}
+
+install() {
+ inst_hook cmdline 30 "$moddir/parse-zfcp.sh"
+ dracut_install tr
+
+ inst /sbin/zfcpconf.sh
+ inst_rules 56-zfcp.rules
+
+ if [[ $hostonly ]]; then
+ inst /etc/zfcp.conf
+ fi
+ dracut_install zfcp_cio_free grep sed seq
+}
\ No newline at end of file
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-arch=$(uname -m)
-[ "$arch" = "s390" -o "$arch" = "s390x" ] || exit 1
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-inst_hook cmdline 30 "$moddir/parse-ccw.sh"
-inst /lib/udev/ccw_init
-inst_rules 81-ccw.rules
-dracut_install znet_cio_free grep sed seq readlink
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ arch=$(uname -m)
+ [ "$arch" = "s390" -o "$arch" = "s390x" ] || return 1
+
+ return 0
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ inst_hook cmdline 30 "$moddir/parse-ccw.sh"
+ inst /lib/udev/ccw_init
+ inst_rules 81-ccw.rules
+ dracut_install znet_cio_free grep sed seq readlink
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-exit 0
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
-inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ return 0
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ inst_hook cmdline 20 "$moddir/parse-insmodpost.sh"
+ inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-type -P biosdevname >/dev/null || exit 1
-
-# do not enable bootchartd by default
-exit 0
+++ /dev/null
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-dracut_install biosdevname
-inst_rules 71-biosdevname.rules
-inst_hook pre-trigger 30 "$moddir/parse-biosdevname.sh"
-
-# set the default state according to the config
-if [[ -e /etc/sysconfig/network ]]; then
- . /etc/sysconfig/network
-fi
-
-if [[ "$BIOSDEVNAME" = "no" ]]; then
- echo "biosdevname=0" >> ${initdir}/etc/cmdline
-fi
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ type -P biosdevname >/dev/null || return 1
+ return 0
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ dracut_install biosdevname
+ inst_rules 71-biosdevname.rules
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-inst_hook pre-pivot 50 "$moddir/selinux-loadpolicy.sh"
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ [[ $hostonly ]] && {
+ [ -x "/usr/sbin/load_policy" -o -x "/sbin/load_policy" ] || return 1
+ return 0
+ }
+ return 0
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ inst_hook pre-pivot 50 "$moddir/selinux-loadpolicy.sh"
+}
+
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-# do not add this module by default
-exit 255
+++ /dev/null
-#!/bin/sh
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-if type -P rsyslogd >/dev/null; then
- installs="rsyslogd"
- for i in {"$libdir","$usrlibdir"}/rsyslog/lmnet.so \
- {"$libdir","$usrlibdir"}/rsyslog/imklog.so \
- {"$libdir","$usrlibdir"}/rsyslog/imuxsock.so ; do
- [ -e "$i" ] && installs="$installs $i"
- done
-elif type -P syslogd >/dev/null; then
- installs="syslogd"
-elif type -P syslog-ng >/dev/null; then
- installs="syslog-ng"
-else
- dwarn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
-fi
-if [ -n "$installs" ]; then
- dracut_install cat
- dracut_install $installs
- inst_hook cmdline 90 "$moddir/parse-syslog-opts.sh"
- inst_hook pre-udev 61 "$moddir/syslog-genrules.sh"
- inst_hook pre-pivot 99 "$moddir/syslog-cleanup.sh"
- inst_simple "$moddir/rsyslogd-start.sh" /sbin/rsyslogd-start
- inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop
- mkdir -p ${initdir}/etc/templates
- inst_simple "${moddir}/rsyslog.conf" /etc/templates
-fi
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ # do not add this module by default
+ return 255
+}
+
+depends() {
+ return 0
+}
+
+install() {
+ if type -P rsyslogd >/dev/null; then
+ installs="rsyslogd"
+ for i in {"$libdir","$usrlibdir"}/rsyslog/lmnet.so \
+ {"$libdir","$usrlibdir"}/rsyslog/imklog.so \
+ {"$libdir","$usrlibdir"}/rsyslog/imuxsock.so ; do
+ [ -e "$i" ] && installs="$installs $i"
+ done
+ elif type -P syslogd >/dev/null; then
+ installs="syslogd"
+ elif type -P syslog-ng >/dev/null; then
+ installs="syslog-ng"
+ else
+ dwarn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
+ fi
+ if [ -n "$installs" ]; then
+ dracut_install cat
+ dracut_install $installs
+ inst_hook cmdline 90 "$moddir/parse-syslog-opts.sh"
+ inst_hook pre-udev 61 "$moddir/syslog-genrules.sh"
+ inst_hook pre-pivot 99 "$moddir/syslog-cleanup.sh"
+ inst_simple "$moddir/rsyslogd-start.sh" /sbin/rsyslogd-start
+ inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop
+ mkdir -p ${initdir}/etc/templates
+ inst_simple "${moddir}/rsyslog.conf" /etc/templates
+ fi
+}
+
+++ /dev/null
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-[[ $1 = -d ]] && echo udev-rules
-exit 0
+++ /dev/null
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-
-dracut_install mount mknod mkdir modprobe pidof sleep chroot \
- sed ls flock cp mv dmesg rm ln rmmod mkfifo
-dracut_install -o less
-if [ ! -e "${initdir}/bin/sh" ]; then
- dracut_install bash
- (ln -s bash "${initdir}/bin/sh" || :)
-fi
-# install our scripts and hooks
-inst "$moddir/init" "/init"
-inst "$moddir/initqueue" "/sbin/initqueue"
-inst "$moddir/loginit" "/sbin/loginit"
-mkdir -p ${initdir}/initqueue
-mkdir -p ${initdir}/emergency
-mkdir -p ${initdir}/initqueue-finished
-mkdir -p ${initdir}/initqueue-settled
-mkdir -p ${initdir}/tmp
-# Bail out if switch_root does not exist
-if type -P switch_root >/dev/null; then
- inst $(type -P switch_root) /sbin/switch_root \
- || derror "Failed to install switch_root"
-else
- inst "$moddir/switch_root" "/sbin/switch_root" \
- || derror "Failed to install switch_root"
-fi
-inst "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh"
-inst_hook cmdline 10 "$moddir/parse-root-opts.sh"
-inst_hook cmdline 20 "$moddir/parse-blacklist.sh"
-mkdir -p "${initdir}/var/run"
-[ -x /lib/systemd/systemd-timestamp ] && inst /lib/systemd/systemd-timestamp
--- /dev/null
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
+check() {
+ return 0
+}
+
+depends() {
+ echo udev-rules
+ return 0
+}
+
+install() {
+ dracut_install mount mknod mkdir modprobe pidof sleep chroot \
+ sed ls flock cp mv dmesg rm ln rmmod mkfifo
+ dracut_install -o less
+ if [ ! -e "${initdir}/bin/sh" ]; then
+ dracut_install bash
+ (ln -s bash "${initdir}/bin/sh" || :)
+ fi
+ # install our scripts and hooks
+ inst "$moddir/init" "/init"
+ inst "$moddir/initqueue" "/sbin/initqueue"
+ inst "$moddir/loginit" "/sbin/loginit"
+ mkdir -p ${initdir}/initqueue
+ mkdir -p ${initdir}/emergency
+ mkdir -p ${initdir}/initqueue-finished
+ mkdir -p ${initdir}/initqueue-settled
+ mkdir -p ${initdir}/tmp
+ # Bail out if switch_root does not exist
+ if type -P switch_root >/dev/null; then
+ inst $(type -P switch_root) /sbin/switch_root \
+ || derror "Failed to install switch_root"
+ else
+ inst "$moddir/switch_root" "/sbin/switch_root" \
+ || derror "Failed to install switch_root"
+ fi
+ inst "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh"
+ inst_hook cmdline 10 "$moddir/parse-root-opts.sh"
+ inst_hook cmdline 20 "$moddir/parse-blacklist.sh"
+ mkdir -p "${initdir}/var/run"
+ [ -x /lib/systemd/systemd-timestamp ] && inst /lib/systemd/systemd-timestamp
+}
+
projects / platform / upstream / dracut.git / commitdiff