[POWERPC] FSL: Cleanup how we detect if we are a PCIe controller

Use the PCI capabilities to determine if we are PCIe PHB.  Also use
PPC_INDIRECT_TYPE_NO_PCIE_LINK since the Freescale PCIe controllers
will lock the system if they don't have link and you try to do a config
access to anything but the PHB.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 10c47b5..69d3c6e 100644 (file)
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -102,6 +102,10 @@ static void __devinit quirk_fsl_pcie_transparent(struct pci_dev *dev)
        int i, res_idx = PCI_BRIDGE_RESOURCES;
        struct pci_controller *hose;
 
+       /* if we aren't a PCIe don't bother */
+       if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
+               return ;
+
        /*
         * Make the bridge be transparent.
         */
@@ -167,20 +171,16 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
        hose->first_busno = bus_range ? bus_range[0] : 0x0;
        hose->last_busno = bus_range ? bus_range[1] : 0xff;
 
-       /* check PCI express bridge */
-       if (of_device_is_compatible(dev, "fsl,mpc8548-pcie") ||
-               of_device_is_compatible(dev, "fsl,mpc8641-pcie"))
-               hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG |
-                       PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
-
        setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4);
        setup_pci_cmd(hose);
 
        /* check PCI express link status */
-       if (of_device_is_compatible(dev, "fsl,mpc8548-pcie") ||
-               of_device_is_compatible(dev, "fsl,mpc8641-pcie"))
+       if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+               hose->indirect_type = PPC_INDIRECT_TYPE_EXT_REG |
+                       PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS;
                if (fsl_pcie_check_link(hose))
-                       return -ENXIO;
+                       hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK;
+       }
 
        printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx."
                "Firmware bus number: %d->%d\n",