[media] friio-fe: convert set_fontend to use DVBv5 parameters

Instead of using dvb_frontend_parameters struct, that were
designed for a subset of the supported standards, use the DVBv5
cache information.

Also, fill the supported delivery systems at dvb_frontend_ops
struct.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/dvb-usb/friio-fe.c b/drivers/media/dvb/dvb-usb/friio-fe.c
index 7973aaf..375815d 100644 (file)
--- a/drivers/media/dvb/dvb-usb/friio-fe.c
+++ b/drivers/media/dvb/dvb-usb/friio-fe.c
@@ -283,22 +283,23 @@ static int jdvbt90502_set_property(struct dvb_frontend *fe,
 }
 
 static int jdvbt90502_get_frontend(struct dvb_frontend *fe,
-                                  struct dvb_frontend_parameters *p)
+                                  struct dtv_frontend_properties *p)
 {
        p->inversion = INVERSION_AUTO;
-       p->u.ofdm.bandwidth = BANDWIDTH_6_MHZ;
-       p->u.ofdm.code_rate_HP = FEC_AUTO;
-       p->u.ofdm.code_rate_LP = FEC_AUTO;
-       p->u.ofdm.constellation = QAM_64;
-       p->u.ofdm.transmission_mode = TRANSMISSION_MODE_AUTO;
-       p->u.ofdm.guard_interval = GUARD_INTERVAL_AUTO;
-       p->u.ofdm.hierarchy_information = HIERARCHY_AUTO;
+       p->bandwidth_hz = 6000000;
+       p->code_rate_HP = FEC_AUTO;
+       p->code_rate_LP = FEC_AUTO;
+       p->modulation = QAM_64;
+       p->transmission_mode = TRANSMISSION_MODE_AUTO;
+       p->guard_interval = GUARD_INTERVAL_AUTO;
+       p->hierarchy = HIERARCHY_AUTO;
        return 0;
 }
 
-static int jdvbt90502_set_frontend(struct dvb_frontend *fe,
-                                  struct dvb_frontend_parameters *p)
+static int jdvbt90502_set_frontend(struct dvb_frontend *fe)
 {
+       struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+
        /**
         * NOTE: ignore all the parameters except frequency.
         *       others should be fixed to the proper value for ISDB-T,
@@ -438,14 +439,13 @@ error:
 }
 
 static struct dvb_frontend_ops jdvbt90502_ops = {
-
+       .delsys = { SYS_ISDBT },
        .info = {
                .name                   = "Comtech JDVBT90502 ISDB-T",
                .type                   = FE_OFDM,
                .frequency_min          = 473000000, /* UHF 13ch, center */
                .frequency_max          = 767142857, /* UHF 62ch, center */
-               .frequency_stepsize     = JDVBT90502_PLL_CLK /
-                                                       JDVBT90502_PLL_DIVIDER,
+               .frequency_stepsize     = JDVBT90502_PLL_CLK / JDVBT90502_PLL_DIVIDER,
                .frequency_tolerance    = 0,
 
                /* NOTE: this driver ignores all parameters but frequency. */
@@ -466,8 +466,8 @@ static struct dvb_frontend_ops jdvbt90502_ops = {
 
        .set_property = jdvbt90502_set_property,
 
-       .set_frontend_legacy = jdvbt90502_set_frontend,
-       .get_frontend_legacy = jdvbt90502_get_frontend,
+       .set_frontend = jdvbt90502_set_frontend,
+       .get_frontend = jdvbt90502_get_frontend,
 
        .read_status = jdvbt90502_read_status,
        .read_signal_strength = jdvbt90502_read_signal_strength,