mtd: spi-nor: cadence-quadspi: write upto 8-bytes data in STIG mode
authorPurna Chandra Mandal <purna.chandra.mandal@intel.com>
Mon, 28 Jan 2019 05:02:29 +0000 (21:02 -0800)
committerBoris Brezillon <boris.brezillon@collabora.com>
Sun, 10 Feb 2019 14:06:31 +0000 (15:06 +0100)
cadence-quadspi controller allows upto eight bytes of data to
be written in software Triggered Instruction generator (STIG) mode
of operation. Lower 4 bytes are written through writedatalower and
upper 4 bytes by writedataupper register.

This patch allows all the 8 bytes to be written.

Signed-off-by: Purna Chandra Mandal <purna.chandra.mandal@intel.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
drivers/mtd/spi-nor/cadence-quadspi.c

index 04cedd3..7f78f94 100644 (file)
@@ -418,9 +418,10 @@ static int cqspi_command_write(struct spi_nor *nor, const u8 opcode,
        void __iomem *reg_base = cqspi->iobase;
        unsigned int reg;
        unsigned int data;
+       u32 write_len;
        int ret;
 
-       if (n_tx > 4 || (n_tx && !txbuf)) {
+       if (n_tx > CQSPI_STIG_DATA_LEN_MAX || (n_tx && !txbuf)) {
                dev_err(nor->dev,
                        "Invalid input argument, cmdlen %d txbuf 0x%p\n",
                        n_tx, txbuf);
@@ -433,10 +434,18 @@ static int cqspi_command_write(struct spi_nor *nor, const u8 opcode,
                reg |= ((n_tx - 1) & CQSPI_REG_CMDCTRL_WR_BYTES_MASK)
                        << CQSPI_REG_CMDCTRL_WR_BYTES_LSB;
                data = 0;
-               memcpy(&data, txbuf, n_tx);
+               write_len = (n_tx > 4) ? 4 : n_tx;
+               memcpy(&data, txbuf, write_len);
+               txbuf += write_len;
                writel(data, reg_base + CQSPI_REG_CMDWRITEDATALOWER);
-       }
 
+               if (n_tx > 4) {
+                       data = 0;
+                       write_len = n_tx - 4;
+                       memcpy(&data, txbuf, write_len);
+                       writel(data, reg_base + CQSPI_REG_CMDWRITEDATAUPPER);
+               }
+       }
        ret = cqspi_exec_flash_cmd(cqspi, reg);
        return ret;
 }