iwl_set_flags_for_band(priv, ctx, priv->band, ctx->vif);
- ctx->staging.ofdm_basic_rates =
- (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
- ctx->staging.cck_basic_rates =
- (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
-
/* clear both MIX and PURE40 mode flag */
ctx->staging.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED |
RXON_FLG_CHANNEL_MODE_PURE_40);
}
}
-void iwl_set_rate(struct iwl_priv *priv)
-{
- struct iwl_rxon_context *ctx;
-
- for_each_context(priv, ctx) {
- ctx->staging.cck_basic_rates =
- (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF;
-
- ctx->staging.ofdm_basic_rates =
- (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
- }
-}
-
static void iwl_set_rxon_hwcrypto(struct iwl_priv *priv,
struct iwl_rxon_context *ctx, int hw_decrypt)
{
}
#endif
+static void iwl_calc_basic_rates(struct iwl_priv *priv,
+ struct iwl_rxon_context *ctx)
+{
+ int lowest_present_ofdm = 100;
+ int lowest_present_cck = 100;
+ u8 cck = 0;
+ u8 ofdm = 0;
+
+ if (ctx->vif) {
+ struct ieee80211_supported_band *sband;
+ unsigned long basic = ctx->vif->bss_conf.basic_rates;
+ int i;
+
+ sband = priv->hw->wiphy->bands[priv->hw->conf.channel->band];
+
+ for_each_set_bit(i, &basic, BITS_PER_LONG) {
+ int hw = sband->bitrates[i].hw_value;
+ if (hw >= IWL_FIRST_OFDM_RATE) {
+ ofdm |= BIT(hw - IWL_FIRST_OFDM_RATE);
+ if (lowest_present_ofdm > hw)
+ lowest_present_ofdm = hw;
+ } else {
+ BUILD_BUG_ON(IWL_FIRST_CCK_RATE != 0);
+
+ cck |= BIT(hw);
+ if (lowest_present_cck > hw)
+ lowest_present_cck = hw;
+ }
+ }
+ }
+
+ /*
+ * Now we've got the basic rates as bitmaps in the ofdm and cck
+ * variables. This isn't sufficient though, as there might not
+ * be all the right rates in the bitmap. E.g. if the only basic
+ * rates are 5.5 Mbps and 11 Mbps, we still need to add 1 Mbps
+ * and 6 Mbps because the 802.11-2007 standard says in 9.6:
+ *
+ * [...] a STA responding to a received frame shall transmit
+ * its Control Response frame [...] at the highest rate in the
+ * BSSBasicRateSet parameter that is less than or equal to the
+ * rate of the immediately previous frame in the frame exchange
+ * sequence ([...]) and that is of the same modulation class
+ * ([...]) as the received frame. If no rate contained in the
+ * BSSBasicRateSet parameter meets these conditions, then the
+ * control frame sent in response to a received frame shall be
+ * transmitted at the highest mandatory rate of the PHY that is
+ * less than or equal to the rate of the received frame, and
+ * that is of the same modulation class as the received frame.
+ *
+ * As a consequence, we need to add all mandatory rates that are
+ * lower than all of the basic rates to these bitmaps.
+ */
+
+ if (IWL_RATE_24M_INDEX < lowest_present_ofdm)
+ ofdm |= IWL_RATE_24M_MASK >> IWL_FIRST_OFDM_RATE;
+ if (IWL_RATE_12M_INDEX < lowest_present_ofdm)
+ ofdm |= IWL_RATE_12M_MASK >> IWL_FIRST_OFDM_RATE;
+ /* 6M already there or needed so always add */
+ ofdm |= IWL_RATE_6M_MASK >> IWL_FIRST_OFDM_RATE;
+
+ /*
+ * CCK is a bit more complex with DSSS vs. HR/DSSS vs. ERP.
+ * Note, however:
+ * - if no CCK rates are basic, it must be ERP since there must
+ * be some basic rates at all, so they're OFDM => ERP PHY
+ * (or we're in 5 GHz, and the cck bitmap will never be used)
+ * - if 11M is a basic rate, it must be ERP as well, so add 5.5M
+ * - if 5.5M is basic, 1M and 2M are mandatory
+ * - if 2M is basic, 1M is mandatory
+ * - if 1M is basic, that's the only valid ACK rate.
+ * As a consequence, it's not as complicated as it sounds, just add
+ * any lower rates to the ACK rate bitmap.
+ */
+ if (IWL_RATE_11M_INDEX < lowest_present_ofdm)
+ ofdm |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE;
+ if (IWL_RATE_5M_INDEX < lowest_present_ofdm)
+ ofdm |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE;
+ if (IWL_RATE_2M_INDEX < lowest_present_ofdm)
+ ofdm |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE;
+ /* 1M already there or needed so always add */
+ cck |= IWL_RATE_1M_MASK >> IWL_FIRST_CCK_RATE;
+
+ IWL_DEBUG_RATE(priv, "Set basic rates cck:0x%.2x ofdm:0x%.2x\n",
+ cck, ofdm);
+
+ /* "basic_rates" is a misnomer here -- should be called ACK rates */
+ ctx->staging.cck_basic_rates = cck;
+ ctx->staging.ofdm_basic_rates = ofdm;
+}
+
/**
* iwlagn_commit_rxon - commit staging_rxon to hardware
*
/* always get timestamp with Rx frame */
ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
+ /* recalculate basic rates */
+ iwl_calc_basic_rates(priv, ctx);
+
/*
* force CTS-to-self frames protection if RTS-CTS is not preferred
* one aggregation protection method
}
iwl_update_bcast_stations(priv);
-
- /*
- * The list of supported rates and rate mask can be different
- * for each band; since the band may have changed, reset
- * the rate mask to what mac80211 lists.
- */
- iwl_set_rate(priv);
}
if (changed & (IEEE80211_CONF_CHANGE_PS |
projects / platform / upstream / kernel-adaptation-pc.git / commitdiff