Fix handling of low-speed devices with SL811 USB controller (again).
authorwdenk <wdenk>
Wed, 12 May 2004 13:20:19 +0000 (13:20 +0000)
committerwdenk <wdenk>
Wed, 12 May 2004 13:20:19 +0000 (13:20 +0000)
drivers/sl811_usb.c

index 61604e5..37ed982 100644 (file)
@@ -226,42 +226,46 @@ int usb_lowlevel_stop(void)
        return 0;
 }
 
-static int calc_needed_buswidth(int bytes, int low_speed)
+static int calc_needed_buswidth(int bytes, int need_preamble)
 {
-       return low_speed ? 0 : bytes * 8 + 512;
+       return !need_preamble ? bytes * 8 + 256 : 8 * 8 * bytes + 2048;
 }
 
-static int sl811_send_packet(int dir_to_host, int data1, __u8 *buffer, int len)
+static int sl811_send_packet(struct usb_device *dev, unsigned long pipe, __u8 *buffer, int len)
 {
        __u8 ctrl = SL811_USB_CTRL_ARM | SL811_USB_CTRL_ENABLE;
        __u16 status = 0;
-       int err = 0, timeout = get_timer(0) + 5*CFG_HZ;
+       int err = 0, time_start = get_timer(0);
+       int need_preamble = !(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
+               usb_pipeslow(pipe);
 
        if (len > 239)
                return -1;
 
-       if (!dir_to_host)
+       if (usb_pipeout(pipe))
                ctrl |= SL811_USB_CTRL_DIR_OUT;
-       if (data1)
+       if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)))
                ctrl |= SL811_USB_CTRL_TOGGLE_1;
-
+       if (need_preamble)
+               ctrl |= SL811_USB_CTRL_PREAMBLE;
+       
        sl811_write(SL811_INTRSTS, 0xff);
 
        while (err < 3) {
                sl811_write(SL811_ADDR_A, 0x10);
                sl811_write(SL811_LEN_A, len);
-               if (!dir_to_host && len)
+               if (usb_pipeout(pipe) && len)
                        sl811_write_buf(0x10, buffer, len);
 
-               if (sl811_read(SL811_SOFCNTDIV)*64 < 
-                   calc_needed_buswidth(len, rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED))
+               if (!(rh_status.wPortStatus & USB_PORT_STAT_LOW_SPEED) &&
+                   sl811_read(SL811_SOFCNTDIV)*64 < calc_needed_buswidth(len, need_preamble))
                        ctrl |= SL811_USB_CTRL_SOF;
                else
                        ctrl &= ~SL811_USB_CTRL_SOF;
 
                sl811_write(SL811_CTRL_A, ctrl);
                while (!(sl811_read(SL811_INTRSTS) & SL811_INTR_DONE_A)) {
-                       if (timeout < get_timer(0)) {
+                       if (5*CFG_HZ < get_timer(time_start)) {
                                printf("USB transmit timed out\n");
                                return -USB_ST_CRC_ERR;
                        }
@@ -276,7 +280,7 @@ static int sl811_send_packet(int dir_to_host, int data1, __u8 *buffer, int len)
                                PDEBUG(0, "usb transfer remainder = %d\n", remainder);
                                len -= remainder;
                        }
-                       if (dir_to_host && len)
+                       if (usb_pipein(pipe) && len)
                                sl811_read_buf(0x10, buffer, len);
                        return len;
                }
@@ -305,7 +309,6 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 {
        int dir_out = usb_pipeout(pipe);
        int ep = usb_pipeendpoint(pipe);
-       __u8* buf = (__u8*)buffer;
        int max = usb_maxpacket(dev, pipe);
        int done = 0;
 
@@ -317,8 +320,7 @@ int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
        sl811_write(SL811_DEV_A, usb_pipedevice(pipe));
        sl811_write(SL811_PIDEP_A, PIDEP(!dir_out ? USB_PID_IN : USB_PID_OUT, ep));
        while (done < len) {
-               int res = sl811_send_packet(!dir_out, usb_gettoggle(dev, ep, dir_out),
-                                           buf+done,
+               int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
                                            max > len - done ? len - done : max);
                if (res < 0) {
                        dev->status = -res;
@@ -342,47 +344,52 @@ int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
 {
        int done = 0;
        int devnum = usb_pipedevice(pipe);
+       int ep = usb_pipeendpoint(pipe);
 
        dev->status = 0;
 
        if (devnum == root_hub_devnum)
                return sl811_rh_submit_urb(dev, pipe, buffer, len, setup);
 
-       PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x\n",
-              devnum, usb_pipeendpoint(pipe), buffer, len, (int)setup->requesttype,
-              (int)setup->request);
+       PDEBUG(7, "dev = %d pipe = %ld buf = %p size = %d rt = %#x req = %#x bus = %i\n",
+              devnum, ep, buffer, len, (int)setup->requesttype,
+              (int)setup->request, sl811_read(SL811_SOFCNTDIV)*64);
 
        sl811_write(SL811_DEV_A, devnum);
-       sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, 0));
+       sl811_write(SL811_PIDEP_A, PIDEP(USB_PID_SETUP, ep));
        /* setup phase */
-       if (sl811_send_packet(0, 0, (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
-               int dir_in = setup->requesttype & USB_DIR_IN;
-               __u8* buf = (__u8*)buffer;
-               int data1 = 1;
+       usb_settoggle(dev, ep, 1, 0);
+       if (sl811_send_packet(dev, usb_sndctrlpipe(dev, ep),
+                             (__u8*)setup, sizeof(*setup)) == sizeof(*setup)) {
+               int dir_in = usb_pipein(pipe);
                int max = usb_maxpacket(dev, pipe);
 
                /* data phase */
                sl811_write(SL811_PIDEP_A,
-                           PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, 0));
+                           PIDEP(dir_in ? USB_PID_IN : USB_PID_OUT, ep));
+               usb_settoggle(dev, ep, usb_pipeout(pipe), 1);
                while (done < len) {
-                       int res = sl811_send_packet(dir_in, data1, buf+done,
+                       int res = sl811_send_packet(dev, pipe, (__u8*)buffer+done,
                                                    max > len - done ? len - done : max);
                        if (res < 0) {
+                               PDEBUG(0, "status data failed!\n");
                                dev->status = -res;
                                return 0;
                        }
                        done += res;
-
+                       usb_dotoggle(dev, ep, usb_pipeout(pipe));
                        if (dir_in && res < max) /* short packet */
                                break;
-
-                       data1 = !data1;
                }
 
                /* status phase */
                sl811_write(SL811_PIDEP_A,
-                           PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, 0));
-               if (sl811_send_packet(!dir_in, 1, 0, 0) < 0) {
+                           PIDEP(!dir_in ? USB_PID_IN : USB_PID_OUT, ep));
+               usb_settoggle(dev, ep, !usb_pipeout(pipe), 1);
+               if (sl811_send_packet(dev, 
+                                     !dir_in ? usb_rcvctrlpipe(dev, ep) : 
+                                     usb_sndctrlpipe(dev, ep), 
+                                     0, 0) < 0) {
                        PDEBUG(0, "status phase failed!\n");
                        dev->status = -1;
                }
@@ -509,13 +516,13 @@ static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int
 
        /* language ids */
        if (id == 0) {
-               *data++ = 3; *data++ = 4;       /* 4 bytes data */
+               *data++ = 4; *data++ = 3;       /* 4 bytes data */
                *data++ = 0; *data++ = 0;       /* some language id */
                return 4;
 
        /* serial number */
        } else if (id == 1) {
-               sprintf (buf, "%x", serial);
+               sprintf (buf, "%#x", serial);
 
        /* product description */
        } else if (id == 2) {
@@ -527,7 +534,8 @@ static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int
        } else
            return 0;
 
-       data [0] = 2 + ascii2utf (buf, data + 2, len - 2);
+       ascii2utf (buf, data + 2, len - 2);
+       data [0] = 2 + strlen(buf) * 2;
        data [1] = 3;
        return data [0];
 }