pch_uart: Fix rx error interrupt setting issue
authorTomoya MORINAGA <tomoya.rohm@gmail.com>
Fri, 6 Jul 2012 08:19:42 +0000 (17:19 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Thu, 26 Jul 2012 20:37:14 +0000 (13:37 -0700)
Rx Error interrupt(E.G. parity error) is not enabled.
So, when parity error occurs, error interrupt is not occurred.
As a result, the received data is not dropped.

This patch adds enable/disable rx error interrupt code.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/pch_uart.c

index c5bc23d..2cc9b46 100644 (file)
@@ -757,7 +757,8 @@ static void pch_dma_rx_complete(void *arg)
                tty_flip_buffer_push(tty);
        tty_kref_put(tty);
        async_tx_ack(priv->desc_rx);
-       pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+       pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+                                           PCH_UART_HAL_RX_ERR_INT);
 }
 
 static void pch_dma_tx_complete(void *arg)
@@ -812,7 +813,8 @@ static int handle_rx_to(struct eg20t_port *priv)
        int rx_size;
        int ret;
        if (!priv->start_rx) {
-               pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+               pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+                                                    PCH_UART_HAL_RX_ERR_INT);
                return 0;
        }
        buf = &priv->rxbuf;
@@ -1081,11 +1083,13 @@ static irqreturn_t pch_uart_interrupt(int irq, void *dev_id)
                case PCH_UART_IID_RDR:  /* Received Data Ready */
                        if (priv->use_dma) {
                                pch_uart_hal_disable_interrupt(priv,
-                                                       PCH_UART_HAL_RX_INT);
+                                               PCH_UART_HAL_RX_INT |
+                                               PCH_UART_HAL_RX_ERR_INT);
                                ret = dma_handle_rx(priv);
                                if (!ret)
                                        pch_uart_hal_enable_interrupt(priv,
-                                                       PCH_UART_HAL_RX_INT);
+                                               PCH_UART_HAL_RX_INT |
+                                               PCH_UART_HAL_RX_ERR_INT);
                        } else {
                                ret = handle_rx(priv);
                        }
@@ -1211,7 +1215,8 @@ static void pch_uart_stop_rx(struct uart_port *port)
        struct eg20t_port *priv;
        priv = container_of(port, struct eg20t_port, port);
        priv->start_rx = 0;
-       pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT);
+       pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_RX_INT |
+                                            PCH_UART_HAL_RX_ERR_INT);
 }
 
 /* Enable the modem status interrupts. */
@@ -1304,7 +1309,8 @@ static int pch_uart_startup(struct uart_port *port)
                pch_request_dma(port);
 
        priv->start_rx = 1;
-       pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT);
+       pch_uart_hal_enable_interrupt(priv, PCH_UART_HAL_RX_INT |
+                                           PCH_UART_HAL_RX_ERR_INT);
        uart_update_timeout(port, CS8, default_baud);
 
        return 0;