#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/device.h>
+#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
enum {
+ /* register offsets */
+ PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */
+ PDC_SECTOR_COUNT = 0x08, /* Sector count reg (per port) */
+ PDC_SECTOR_NUMBER = 0x0C, /* Sector number reg (per port) */
+ PDC_CYLINDER_LOW = 0x10, /* Cylinder low reg (per port) */
+ PDC_CYLINDER_HIGH = 0x14, /* Cylinder high reg (per port) */
+ PDC_DEVICE = 0x18, /* Device/Head reg (per port) */
+ PDC_COMMAND = 0x1C, /* Command/status reg (per port) */
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
PDC_FLASH_CTL = 0x44, /* Flash control register */
PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */
+ /* Sequence counter control registers bit definitions */
+ PDC_SEQCNTRL_INT_MASK = (1 << 5), /* Sequence Interrupt Mask */
+
+ /* Feature register values */
+ PDC_FEATURE_ATAPI_PIO = 0x00, /* ATAPI data xfer by PIO */
+ PDC_FEATURE_ATAPI_DMA = 0x01, /* ATAPI data xfer by DMA */
+
+ /* Device/Head register values */
+ PDC_DEVICE_SATA = 0xE0, /* Device/Head value for SATA devices */
+
/* PDC_CTLSTAT bit definitions */
PDC_DMA_ENABLE = (1 << 7),
PDC_IRQ_DISABLE = (1 << 10),
PDC_RESET = (1 << 11), /* HDMA reset */
PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY |
- ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
+ ATA_FLAG_MMIO |
ATA_FLAG_PIO_POLLING,
/* hp->flags bits */
static void pdc_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
+static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc);
static void pdc_irq_clear(struct ata_port *ap);
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc);
static void pdc_host_stop(struct ata_host *host);
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
+ .check_atapi_dma = pdc_check_atapi_dma,
+
+ .qc_prep = pdc_qc_prep,
+ .qc_issue = pdc_qc_issue_prot,
+ .freeze = pdc_freeze,
+ .thaw = pdc_thaw,
+ .error_handler = pdc_error_handler,
+ .post_internal_cmd = pdc_post_internal_cmd,
+ .data_xfer = ata_mmio_data_xfer,
+ .irq_handler = pdc_interrupt,
+ .irq_clear = pdc_irq_clear,
+
+ .scr_read = pdc_sata_scr_read,
+ .scr_write = pdc_sata_scr_write,
+ .port_start = pdc_port_start,
+ .port_stop = pdc_port_stop,
+ .host_stop = pdc_host_stop,
+};
+
+/* First-generation chips need a more restrictive ->check_atapi_dma op */
+static const struct ata_port_operations pdc_old_sata_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = pdc_tf_load_mmio,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = pdc_exec_command_mmio,
+ .dev_select = ata_std_dev_select,
+ .check_atapi_dma = pdc_old_check_atapi_dma,
.qc_prep = pdc_qc_prep,
.qc_issue = pdc_qc_issue_prot,
.check_status = ata_check_status,
.exec_command = pdc_exec_command_mmio,
.dev_select = ata_std_dev_select,
+ .check_atapi_dma = pdc_check_atapi_dma,
.phy_reset = pdc_pata_phy_reset,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
- .port_ops = &pdc_sata_ops,
+ .port_ops = &pdc_old_sata_ops,
},
/* board_20319 */
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
- .port_ops = &pdc_sata_ops,
+ .port_ops = &pdc_old_sata_ops,
},
/* board_20619 */
writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4));
}
+static void pdc_atapi_dma_pkt(struct ata_taskfile *tf,
+ dma_addr_t sg_table,
+ unsigned int cdb_len, u8 *cdb,
+ u8 *buf)
+{
+ u32 *buf32 = (u32 *) buf;
+
+ /* set control bits (byte 0), zero delay seq id (byte 3),
+ * and seq id (byte 2)
+ */
+ if (!(tf->flags & ATA_TFLAG_WRITE))
+ buf32[0] = cpu_to_le32(PDC_PKT_READ);
+ else
+ buf32[0] = 0;
+ buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */
+ buf32[2] = 0; /* no next-packet */
+
+ /* we can represent cdb lengths 2/4/6/8/10/12/14/16 */
+ BUG_ON(cdb_len & ~0x1E);
+
+ buf[12] = (((cdb_len >> 1) & 7) << 5) | ATA_REG_DATA | PDC_LAST_REG;
+ memcpy(buf+13, cdb, cdb_len);
+}
+
static void pdc_qc_prep(struct ata_queued_cmd *qc)
{
struct pdc_port_priv *pp = qc->ap->private_data;
pdc_pkt_footer(&qc->tf, pp->pkt, i);
break;
+ case ATA_PROT_ATAPI:
+ case ATA_PROT_ATAPI_NODATA:
+ ata_qc_prep(qc);
+ break;
+
+ case ATA_PROT_ATAPI_DMA:
+ ata_qc_prep(qc);
+ pdc_atapi_dma_pkt(&qc->tf, qc->ap->prd_dma, qc->dev->cdb_len, qc->cdb, pp->pkt);
+ break;
+
default:
break;
}
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
+ case ATA_PROT_ATAPI_DMA:
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
ata_qc_complete(qc);
handled = 1;
readl((void __iomem *) ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
}
+static unsigned int pdc_wait_for_drq(struct ata_port *ap)
+{
+ void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
+ unsigned int i;
+ unsigned int status;
+
+ /* Following pdc-ultra's WaitForDrq() we loop here until BSY
+ * is clear and DRQ is set in altstatus. We could possibly call
+ * ata_busy_wait() and loop until DRQ is set, but since we don't
+ * know how much time a call to ata_busy_wait() took, we don't
+ * know when to time out the outer loop.
+ */
+ for(i = 0; i < 1000; ++i) {
+ status = readb(port_mmio + 0x38); /* altstatus */
+ if (status == 0xFF)
+ break;
+ if (status & ATA_BUSY)
+ ;
+ else if (status & (ATA_DRQ | ATA_ERR))
+ break;
+ mdelay(1);
+ }
+ if (i >= 1000)
+ ata_port_printk(ap, KERN_WARNING, "%s timed out", __FUNCTION__);
+ return status;
+}
+
+static void pdc_issue_atapi_pkt_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = (void __iomem *) ap->ioaddr.cmd_addr;
+ void __iomem *host_mmio = ap->host->mmio_base;
+ unsigned int nbytes;
+ unsigned int tmp;
+
+ writeb(0x00, port_mmio + PDC_CTLSTAT); /* route drive INT to SEQ 0 */
+ writeb(PDC_SEQCNTRL_INT_MASK, host_mmio + 0); /* but mask SEQ 0 INT */
+
+ /* select drive */
+ if (sata_scr_valid(ap)) {
+ tmp = PDC_DEVICE_SATA;
+ } else {
+ tmp = ATA_DEVICE_OBS;
+ if (qc->dev->devno != 0)
+ tmp |= ATA_DEV1;
+ }
+ writeb(tmp, port_mmio + PDC_DEVICE);
+ ata_busy_wait(ap, ATA_BUSY, 1000);
+
+ writeb(0x00, port_mmio + PDC_SECTOR_COUNT);
+ writeb(0x00, port_mmio + PDC_SECTOR_NUMBER);
+
+ /* set feature and byte counter registers */
+ if (qc->tf.protocol != ATA_PROT_ATAPI_DMA) {
+ tmp = PDC_FEATURE_ATAPI_PIO;
+ /* set byte counter register to real transfer byte count */
+ nbytes = qc->nbytes;
+ if (!nbytes)
+ nbytes = qc->nsect << 9;
+ if (nbytes > 0xffff)
+ nbytes = 0xffff;
+ } else {
+ tmp = PDC_FEATURE_ATAPI_DMA;
+ /* set byte counter register to 0 */
+ nbytes = 0;
+ }
+ writeb(tmp, port_mmio + PDC_FEATURE);
+ writeb(nbytes & 0xFF, port_mmio + PDC_CYLINDER_LOW);
+ writeb((nbytes >> 8) & 0xFF, port_mmio + PDC_CYLINDER_HIGH);
+
+ /* send ATAPI packet command 0xA0 */
+ writeb(ATA_CMD_PACKET, port_mmio + PDC_COMMAND);
+
+ /*
+ * At this point in the issuing of a packet command, the Promise
+ * driver busy-waits for INT (CTLSTAT bit 27) if it detected
+ * (at port init time) that the device interrupts with assertion
+ * of DRQ after receiving a packet command.
+ *
+ * XXX: Do we need to handle this case as well? Does libata detect
+ * this case for us, or do we have to do our own per-port init?
+ */
+
+ pdc_wait_for_drq(ap);
+
+ /* now the device only waits for the CDB */
+}
+
static unsigned int pdc_qc_issue_prot(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
+ case ATA_PROT_ATAPI_DMA:
+ pdc_issue_atapi_pkt_cmd(qc);
+ /*FALLTHROUGH*/
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
pdc_packet_start(qc);
return 0;
- case ATA_PROT_ATAPI_DMA:
- BUG();
- break;
-
default:
break;
}
ata_exec_command(ap, tf);
}
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ u8 *scsicmd = qc->scsicmd->cmnd;
+ int pio = 1; /* atapi dma off by default */
+
+ /* Whitelist commands that may use DMA. */
+ switch (scsicmd[0]) {
+ case WRITE_12:
+ case WRITE_10:
+ case WRITE_6:
+ case READ_12:
+ case READ_10:
+ case READ_6:
+ case 0xad: /* READ_DVD_STRUCTURE */
+ case 0xbe: /* READ_CD */
+ pio = 0;
+ }
+ /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
+ if (scsicmd[0] == WRITE_10) {
+ unsigned int lba;
+ lba = (scsicmd[2] << 24) | (scsicmd[3] << 16) | (scsicmd[4] << 8) | scsicmd[5];
+ if (lba >= 0xFFFF4FA2)
+ pio = 1;
+ }
+ return pio;
+}
+
+static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* First generation chips cannot use ATAPI DMA on SATA ports */
+ if (sata_scr_valid(ap))
+ return 1;
+ return pdc_check_atapi_dma(qc);
+}
static void pdc_ata_setup_port(struct ata_ioports *port, unsigned long base)
{
projects / platform / kernel / linux-starfive.git / commitdiff