powerpc/85xx: Rework MPC8569MDS pci_init_board to use common FSL PCIe code
authorKumar Gala <galak@kernel.crashing.org>
Fri, 17 Dec 2010 16:18:07 +0000 (10:18 -0600)
committerKumar Gala <galak@kernel.crashing.org>
Fri, 14 Jan 2011 07:32:20 +0000 (01:32 -0600)
Remove duplicated code in MPC8569MDS board and utilize the common
fsl_pcie_init_board().  We also now dynamically setup the LAWs for PCI
controllers based on which PCIe controllers are enabled.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
board/freescale/mpc8569mds/law.c
board/freescale/mpc8569mds/mpc8569mds.c
include/configs/MPC8569MDS.h

index 60eea45..bcd0311 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -51,8 +51,6 @@ struct law_entry law_table[] = {
 #ifndef CONFIG_SPD_EEPROM
        SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_1G, LAW_TRGT_IF_DDR),
 #endif
-       SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_1),
-       SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1),
        SET_LAW(CONFIG_SYS_BCSR_BASE_PHYS, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
        SET_LAW(CONFIG_SYS_SRIO_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_RIO),
 };
index 07db16a..ecda222 100644 (file)
@@ -518,51 +518,14 @@ static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd)
        clrbits_8(&bcsr[17], BCSR17_nUSBEN);
 }
 
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif  /* CONFIG_PCIE1 */
-
 #ifdef CONFIG_PCI
 void pci_init_board(void)
 {
-       volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       struct fsl_pci_info pci_info[1];
-       u32 devdisr, pordevsr, io_sel;
-       int first_free_busno = 0;
-       int num = 0;
-
-       int pcie_ep, pcie_configured;
-
-       devdisr = in_be32(&gur->devdisr);
-       pordevsr = in_be32(&gur->pordevsr);
-       io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
-
-       debug ("   pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
-
 #if defined(CONFIG_PQ_MDS_PIB)
        pib_init();
 #endif
 
-#ifdef CONFIG_PCIE1
-       pcie_configured = is_serdes_configured(PCIE1);
-
-       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
-               SET_STD_PCIE_INFO(pci_info[num], 1);
-               pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
-                       pcie_ep ? "Endpoint" : "Root Complex",
-                       pci_info[num].regs);
-               first_free_busno = fsl_pci_init_port(&pci_info[num++],
-                                       &pcie1_hose, first_free_busno);
-       } else {
-               printf("PCIE1: disabled\n");
-       }
-
-       puts("\n");
-#else
-       setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
-#endif
-
+       fsl_pcie_init_board(0);
 }
 #endif /* CONFIG_PCI */
 
index 177d5d5..814c175 100644 (file)
@@ -345,6 +345,7 @@ extern unsigned long get_clock_freq(void);
  * General PCI
  * Memory Addresses are mapped 1-1. I/O is mapped from 0
  */
+#define CONFIG_SYS_PCIE1_NAME          "Slot"
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_BUS       0xa0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS      0xa0000000