+2005-04-02 Kazu Hirata <kazu@cs.umass.edu>
+
+ * config/iq2000/iq2000.c (uns_arith_operand, arith_operand,
+ small_int, large_int, reg_or_0_operand, simple_memory_operand,
+ equality_op, cmp_op, pc_or_label_operand, call_insn_operand,
+ move_operand, power_of_2_operand): Move to predicates.md.
+ * config/iq2000/iq2000.h (SPECIAL_MODE_PREDICATES,
+ PREDICATE_CODE): Remove.
+ * config/iq2000/iq2000.md: Include predicates.md.
+ * config/iq2000/predicates.md: New.
+
2005-04-02 Richard Sandiford <rsandifo@redhat.com>
* config/m68hc11/m68hc11.h (target_flags, MASK_SHORT)
struct gcc_target targetm = TARGET_INITIALIZER;
\f
-/* Return 1 if OP can be used as an operand where a register or 16 bit unsigned
- integer is needed. */
-
-int
-uns_arith_operand (rtx op, enum machine_mode mode)
-{
- if (GET_CODE (op) == CONST_INT && SMALL_INT_UNSIGNED (op))
- return 1;
-
- return register_operand (op, mode);
-}
-
-/* Return 1 if OP can be used as an operand where a 16 bit integer is needed. */
-
-int
-arith_operand (rtx op, enum machine_mode mode)
-{
- if (GET_CODE (op) == CONST_INT && SMALL_INT (op))
- return 1;
-
- return register_operand (op, mode);
-}
-
-/* Return 1 if OP is a integer which fits in 16 bits. */
-
-int
-small_int (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
-{
- return (GET_CODE (op) == CONST_INT && SMALL_INT (op));
-}
-
-/* Return 1 if OP is a 32 bit integer which is too big to be loaded with one
- instruction. */
-
-int
-large_int (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
-{
- HOST_WIDE_INT value;
-
- if (GET_CODE (op) != CONST_INT)
- return 0;
-
- value = INTVAL (op);
-
- /* IOR reg,$r0,value. */
- if ((value & ~ ((HOST_WIDE_INT) 0x0000ffff)) == 0)
- return 0;
-
- /* SUBU reg,$r0,value. */
- if (((unsigned HOST_WIDE_INT) (value + 32768)) <= 32767)
- return 0;
-
- /* LUI reg,value >> 16. */
- if ((value & 0x0000ffff) == 0)
- return 0;
-
- return 1;
-}
-
-/* Return 1 if OP is a register or the constant 0. */
-
-int
-reg_or_0_operand (rtx op, enum machine_mode mode)
-{
- switch (GET_CODE (op))
- {
- case CONST_INT:
- return INTVAL (op) == 0;
-
- case CONST_DOUBLE:
- return op == CONST0_RTX (mode);
-
- case REG:
- case SUBREG:
- return register_operand (op, mode);
-
- default:
- break;
- }
-
- return 0;
-}
-
-/* Return 1 if OP is a memory operand that fits in a single instruction
- (i.e., register + small offset). */
-
-int
-simple_memory_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
-{
- rtx addr, plus0, plus1;
-
- /* Eliminate non-memory operations. */
- if (GET_CODE (op) != MEM)
- return 0;
-
- /* Dword operations really put out 2 instructions, so eliminate them. */
- if (GET_MODE_SIZE (GET_MODE (op)) > (unsigned) UNITS_PER_WORD)
- return 0;
-
- /* Decode the address now. */
- addr = XEXP (op, 0);
- switch (GET_CODE (addr))
- {
- case REG:
- case LO_SUM:
- return 1;
-
- case CONST_INT:
- return SMALL_INT (addr);
-
- case PLUS:
- plus0 = XEXP (addr, 0);
- plus1 = XEXP (addr, 1);
- if (GET_CODE (plus0) == REG
- && GET_CODE (plus1) == CONST_INT && SMALL_INT (plus1)
- && SMALL_INT_UNSIGNED (plus1) /* No negative offsets. */)
- return 1;
-
- else if (GET_CODE (plus1) == REG
- && GET_CODE (plus0) == CONST_INT && SMALL_INT (plus0)
- && SMALL_INT_UNSIGNED (plus1) /* No negative offsets. */)
- return 1;
-
- else
- return 0;
-
- case SYMBOL_REF:
- return 0;
-
- default:
- break;
- }
-
- return 0;
-}
-
-/* Return nonzero if the code of this rtx pattern is EQ or NE. */
-
-int
-equality_op (rtx op, enum machine_mode mode)
-{
- if (mode != GET_MODE (op))
- return 0;
-
- return GET_CODE (op) == EQ || GET_CODE (op) == NE;
-}
-
-/* Return nonzero if the code is a relational operations (EQ, LE, etc). */
-
-int
-cmp_op (rtx op, enum machine_mode mode)
-{
- if (mode != GET_MODE (op))
- return 0;
-
- return COMPARISON_P (op);
-}
-
-/* Return nonzero if the operand is either the PC or a label_ref. */
-
-int
-pc_or_label_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
-{
- if (op == pc_rtx)
- return 1;
-
- if (GET_CODE (op) == LABEL_REF)
- return 1;
-
- return 0;
-}
-
-/* Return nonzero if OP is a valid operand for a call instruction. */
-
-int
-call_insn_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
-{
- return (CONSTANT_ADDRESS_P (op)
- || (GET_CODE (op) == REG && op != arg_pointer_rtx
- && ! (REGNO (op) >= FIRST_PSEUDO_REGISTER
- && REGNO (op) <= LAST_VIRTUAL_REGISTER)));
-}
-
-/* Return nonzero if OP is valid as a source operand for a move instruction. */
-
-int
-move_operand (rtx op, enum machine_mode mode)
-{
- /* Accept any general operand after reload has started; doing so
- avoids losing if reload does an in-place replacement of a register
- with a SYMBOL_REF or CONST. */
- return (general_operand (op, mode)
- && (! (iq2000_check_split (op, mode))
- || reload_in_progress || reload_completed));
-}
-
-/* Return nonzero if OP is a constant power of 2. */
-
-int
-power_of_2_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
-{
- int intval;
-
- if (GET_CODE (op) != CONST_INT)
- return 0;
- else
- intval = INTVAL (op);
-
- return ((intval & ((unsigned)(intval) - 1)) == 0);
-}
-
/* Return nonzero if we split the address into high and low parts. */
int
\f
/* Miscellaneous Parameters. */
-#define PREDICATE_CODES \
- {"uns_arith_operand", { REG, CONST_INT, SUBREG }}, \
- {"arith_operand", { REG, CONST_INT, SUBREG }}, \
- {"small_int", { CONST_INT }}, \
- {"large_int", { CONST_INT }}, \
- {"reg_or_0_operand", { REG, CONST_INT, CONST_DOUBLE, SUBREG }}, \
- {"simple_memory_operand", { MEM, SUBREG }}, \
- {"equality_op", { EQ, NE }}, \
- {"cmp_op", { EQ, NE, GT, GE, GTU, GEU, LT, LE, \
- LTU, LEU }}, \
- {"pc_or_label_operand", { PC, LABEL_REF }}, \
- {"call_insn_operand", { CONST_INT, CONST, SYMBOL_REF, REG}}, \
- {"move_operand", { CONST_INT, CONST_DOUBLE, CONST, \
- SYMBOL_REF, LABEL_REF, SUBREG, \
- REG, MEM}}, \
- {"power_of_2_operand", { CONST_INT }},
-
#define CASE_VECTOR_MODE SImode
#define WORD_REGISTER_OPERATIONS
((LENGTH) = iq2000_adjust_insn_length ((INSN), (LENGTH)))
\f
-/* A list of predicates that do special things with modes, and so
- should not elicit warnings for VOIDmode match_operand. */
-
-#define SPECIAL_MODE_PREDICATES \
- "pc_or_label_operand",
-
-\f
/* How to tell the debugger about changes of source files. */
;; iq2000.md Machine Description for Vitesse IQ2000 processors
-;; Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+;; Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
;; This file is part of GCC.
(nil)
(nil)])
+(include "predicates.md")
\f
;; .........................
--- /dev/null
+;; Predicate definitions for Vitesse IQ2000.
+;; Copyright (C) 2005 Free Software Foundation, Inc.
+;;
+;; This file is part of GCC.
+;;
+;; GCC is free software; you can redistribute it and/or modify
+;; it under the terms of the GNU General Public License as published by
+;; the Free Software Foundation; either version 2, or (at your option)
+;; any later version.
+;;
+;; GCC is distributed in the hope that it will be useful,
+;; but WITHOUT ANY WARRANTY; without even the implied warranty of
+;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+;; GNU General Public License for more details.
+;;
+;; You should have received a copy of the GNU General Public License
+;; along with GCC; see the file COPYING. If not, write to
+;; the Free Software Foundation, 59 Temple Place - Suite 330,
+;; Boston, MA 02111-1307, USA.
+
+;; Return 1 if OP can be used as an operand where a register or 16 bit
+;; unsigned integer is needed.
+
+(define_predicate "uns_arith_operand"
+ (match_code "reg,const_int,subreg")
+{
+ if (GET_CODE (op) == CONST_INT && SMALL_INT_UNSIGNED (op))
+ return 1;
+
+ return register_operand (op, mode);
+})
+
+;; Return 1 if OP can be used as an operand where a 16 bit integer is
+;; needed.
+
+(define_predicate "arith_operand"
+ (match_code "reg,const_int,subreg")
+{
+ if (GET_CODE (op) == CONST_INT && SMALL_INT (op))
+ return 1;
+
+ return register_operand (op, mode);
+})
+
+;; Return 1 if OP is a integer which fits in 16 bits.
+
+(define_predicate "small_int"
+ (match_code "const_int")
+{
+ return (GET_CODE (op) == CONST_INT && SMALL_INT (op));
+})
+
+;; Return 1 if OP is a 32 bit integer which is too big to be loaded
+;; with one instruction.
+
+(define_predicate "large_int"
+ (match_code "const_int")
+{
+ HOST_WIDE_INT value;
+
+ if (GET_CODE (op) != CONST_INT)
+ return 0;
+
+ value = INTVAL (op);
+
+ /* IOR reg,$r0,value. */
+ if ((value & ~ ((HOST_WIDE_INT) 0x0000ffff)) == 0)
+ return 0;
+
+ /* SUBU reg,$r0,value. */
+ if (((unsigned HOST_WIDE_INT) (value + 32768)) <= 32767)
+ return 0;
+
+ /* LUI reg,value >> 16. */
+ if ((value & 0x0000ffff) == 0)
+ return 0;
+
+ return 1;
+})
+
+;; Return 1 if OP is a register or the constant 0.
+
+(define_predicate "reg_or_0_operand"
+ (match_code "reg,const_int,const_double,subreg")
+{
+ switch (GET_CODE (op))
+ {
+ case CONST_INT:
+ return INTVAL (op) == 0;
+
+ case CONST_DOUBLE:
+ return op == CONST0_RTX (mode);
+
+ case REG:
+ case SUBREG:
+ return register_operand (op, mode);
+
+ default:
+ break;
+ }
+
+ return 0;
+})
+
+;; Return 1 if OP is a memory operand that fits in a single
+;; instruction (i.e., register + small offset).
+
+(define_predicate "simple_memory_operand"
+ (match_code "mem,subreg")
+{
+ rtx addr, plus0, plus1;
+
+ /* Eliminate non-memory operations. */
+ if (GET_CODE (op) != MEM)
+ return 0;
+
+ /* Dword operations really put out 2 instructions, so eliminate them. */
+ if (GET_MODE_SIZE (GET_MODE (op)) > (unsigned) UNITS_PER_WORD)
+ return 0;
+
+ /* Decode the address now. */
+ addr = XEXP (op, 0);
+ switch (GET_CODE (addr))
+ {
+ case REG:
+ case LO_SUM:
+ return 1;
+
+ case CONST_INT:
+ return SMALL_INT (addr);
+
+ case PLUS:
+ plus0 = XEXP (addr, 0);
+ plus1 = XEXP (addr, 1);
+ if (GET_CODE (plus0) == REG
+ && GET_CODE (plus1) == CONST_INT && SMALL_INT (plus1)
+ && SMALL_INT_UNSIGNED (plus1) /* No negative offsets. */)
+ return 1;
+
+ else if (GET_CODE (plus1) == REG
+ && GET_CODE (plus0) == CONST_INT && SMALL_INT (plus0)
+ && SMALL_INT_UNSIGNED (plus1) /* No negative offsets. */)
+ return 1;
+
+ else
+ return 0;
+
+ case SYMBOL_REF:
+ return 0;
+
+ default:
+ break;
+ }
+
+ return 0;
+})
+
+;; Return nonzero if the code of this rtx pattern is EQ or NE.
+
+(define_predicate "equality_op"
+ (match_code "eq,ne")
+{
+ if (mode != GET_MODE (op))
+ return 0;
+
+ return GET_CODE (op) == EQ || GET_CODE (op) == NE;
+})
+
+;; Return nonzero if the code is a relational operations (EQ, LE,
+;; etc).
+
+(define_predicate "cmp_op"
+ (match_code "eq,ne,gt,ge,gtu,geu,lt,le,ltu,leu")
+{
+ if (mode != GET_MODE (op))
+ return 0;
+
+ return COMPARISON_P (op);
+})
+
+;; Return nonzero if the operand is either the PC or a label_ref.
+
+(define_special_predicate "pc_or_label_operand"
+ (match_code "pc,label_ref")
+{
+ if (op == pc_rtx)
+ return 1;
+
+ if (GET_CODE (op) == LABEL_REF)
+ return 1;
+
+ return 0;
+})
+
+;; Return nonzero if OP is a valid operand for a call instruction.
+
+(define_predicate "call_insn_operand"
+ (match_code "const_int,const,symbol_ref,reg")
+{
+ return (CONSTANT_ADDRESS_P (op)
+ || (GET_CODE (op) == REG && op != arg_pointer_rtx
+ && ! (REGNO (op) >= FIRST_PSEUDO_REGISTER
+ && REGNO (op) <= LAST_VIRTUAL_REGISTER)));
+})
+
+;; Return nonzero if OP is valid as a source operand for a move
+;; instruction.
+
+(define_predicate "move_operand"
+ (match_code "const_int,const_double,const,symbol_ref,label_ref,subreg,reg,mem")
+{
+ /* Accept any general operand after reload has started; doing so
+ avoids losing if reload does an in-place replacement of a register
+ with a SYMBOL_REF or CONST. */
+ return (general_operand (op, mode)
+ && (! (iq2000_check_split (op, mode))
+ || reload_in_progress || reload_completed));
+})
+
+;; Return nonzero if OP is a constant power of 2.
+
+(define_predicate "power_of_2_operand"
+ (match_code "const_int")
+{
+ int intval;
+
+ if (GET_CODE (op) != CONST_INT)
+ return 0;
+ else
+ intval = INTVAL (op);
+
+ return ((intval & ((unsigned)(intval) - 1)) == 0);
+})
projects / platform / upstream / linaro-gcc.git / commitdiff