__le32 value;
};
-/* currently the best mechanism for determining SIFS is the band in use */
-static u16 get_sifs(struct brcms_band *band)
-{
- return band->bandtype == BRCM_BAND_5G ? APHY_SIFS_TIME :
- BPHY_SIFS_TIME;
-}
-
-
-/*
- * Detect Card removed.
- * Even checking an sbconfig register read will not false trigger when the core
- * is in reset it breaks CF address mechanism. Accessing gphy phyversion will
- * cause SB error if aphy is in reset on 4306B0-DB. Need a simple accessible
- * reg with fixed 0/1 pattern (some platforms return all 0).
- * If clocks are present, call the sb routine which will figure out if the
- * device is removed.
- */
-static bool brcms_deviceremoved(struct brcms_c_info *wlc)
-{
- if (!wlc->hw->clk)
- return ai_deviceremoved(wlc->hw->sih);
- return (R_REG(&wlc->hw->regs->maccontrol) &
- (MCTL_PSM_JMP_0 | MCTL_IHR_EN)) != MCTL_IHR_EN;
-}
-
-/* sum the individual fifo tx pending packet counts */
-static s16 brcms_txpktpendtot(struct brcms_c_info *wlc)
-{
- return wlc->core->txpktpend[0] + wlc->core->txpktpend[1] +
- wlc->core->txpktpend[2] + wlc->core->txpktpend[3];
-}
-
-static bool brcms_is_mband_unlocked(struct brcms_c_info *wlc)
-{
- return wlc->pub->_nbands > 1 && !wlc->bandlocked;
-}
-
-static int brcms_chspec_bw(u16 chanspec)
-{
- if (CHSPEC_IS40(chanspec))
- return BRCMS_40_MHZ;
- if (CHSPEC_IS20(chanspec))
- return BRCMS_20_MHZ;
-
- return BRCMS_10_MHZ;
-}
-
struct edcf_acparam {
u8 ACI;
u8 ECW;
static struct brcms_c_info *wlc_info_dbg = (struct brcms_c_info *) (NULL);
#endif
+/* currently the best mechanism for determining SIFS is the band in use */
+static u16 get_sifs(struct brcms_band *band)
+{
+ return band->bandtype == BRCM_BAND_5G ? APHY_SIFS_TIME :
+ BPHY_SIFS_TIME;
+}
+
+/*
+ * Detect Card removed.
+ * Even checking an sbconfig register read will not false trigger when the core
+ * is in reset it breaks CF address mechanism. Accessing gphy phyversion will
+ * cause SB error if aphy is in reset on 4306B0-DB. Need a simple accessible
+ * reg with fixed 0/1 pattern (some platforms return all 0).
+ * If clocks are present, call the sb routine which will figure out if the
+ * device is removed.
+ */
+static bool brcms_deviceremoved(struct brcms_c_info *wlc)
+{
+ if (!wlc->hw->clk)
+ return ai_deviceremoved(wlc->hw->sih);
+ return (R_REG(&wlc->hw->regs->maccontrol) &
+ (MCTL_PSM_JMP_0 | MCTL_IHR_EN)) != MCTL_IHR_EN;
+}
+
+/* sum the individual fifo tx pending packet counts */
+static s16 brcms_txpktpendtot(struct brcms_c_info *wlc)
+{
+ return wlc->core->txpktpend[0] + wlc->core->txpktpend[1] +
+ wlc->core->txpktpend[2] + wlc->core->txpktpend[3];
+}
+
+static bool brcms_is_mband_unlocked(struct brcms_c_info *wlc)
+{
+ return wlc->pub->_nbands > 1 && !wlc->bandlocked;
+}
+
+static int brcms_chspec_bw(u16 chanspec)
+{
+ if (CHSPEC_IS40(chanspec))
+ return BRCMS_40_MHZ;
+ if (CHSPEC_IS20(chanspec))
+ return BRCMS_20_MHZ;
+
+ return BRCMS_10_MHZ;
+}
+
+/*
+ * return true if Minimum Power Consumption should
+ * be entered, false otherwise
+ */
+static bool brcms_c_is_non_delay_mpc(struct brcms_c_info *wlc)
+{
+ return false;
+}
+
+static bool brcms_c_ismpc(struct brcms_c_info *wlc)
+{
+ return (wlc->mpc_delay_off == 0) && (brcms_c_is_non_delay_mpc(wlc));
+}
+
static void brcms_c_bsscfg_mfree(struct brcms_bss_cfg *cfg)
{
if (cfg == NULL)
}
}
+/*
+ * calculate frame duration of a given rate and length, return
+ * time in usec unit
+ */
+uint
+brcms_c_calc_frame_time(struct brcms_c_info *wlc, u32 ratespec,
+ u8 preamble_type, uint mac_len)
+{
+ uint nsyms, dur = 0, Ndps, kNdps;
+ uint rate = rspec2rate(ratespec);
+
+ if (rate == 0) {
+ wiphy_err(wlc->wiphy, "wl%d: WAR: using rate of 1 mbps\n",
+ wlc->pub->unit);
+ rate = BRCM_RATE_1M;
+ }
+
+ BCMMSG(wlc->wiphy, "wl%d: rspec 0x%x, preamble_type %d, len%d\n",
+ wlc->pub->unit, ratespec, preamble_type, mac_len);
+
+ if (is_mcs_rate(ratespec)) {
+ uint mcs = ratespec & RSPEC_RATE_MASK;
+ int tot_streams = mcs_2_txstreams(mcs) + rspec_stc(ratespec);
+
+ dur = PREN_PREAMBLE + (tot_streams * PREN_PREAMBLE_EXT);
+ if (preamble_type == BRCMS_MM_PREAMBLE)
+ dur += PREN_MM_EXT;
+ /* 1000Ndbps = kbps * 4 */
+ kNdps = mcs_2_rate(mcs, rspec_is40mhz(ratespec),
+ rspec_issgi(ratespec)) * 4;
+
+ if (rspec_stc(ratespec) == 0)
+ nsyms =
+ CEIL((APHY_SERVICE_NBITS + 8 * mac_len +
+ APHY_TAIL_NBITS) * 1000, kNdps);
+ else
+ /* STBC needs to have even number of symbols */
+ nsyms =
+ 2 *
+ CEIL((APHY_SERVICE_NBITS + 8 * mac_len +
+ APHY_TAIL_NBITS) * 1000, 2 * kNdps);
+
+ dur += APHY_SYMBOL_TIME * nsyms;
+ if (wlc->band->bandtype == BRCM_BAND_2G)
+ dur += DOT11_OFDM_SIGNAL_EXTENSION;
+ } else if (is_ofdm_rate(rate)) {
+ dur = APHY_PREAMBLE_TIME;
+ dur += APHY_SIGNAL_TIME;
+ /* Ndbps = Mbps * 4 = rate(500Kbps) * 2 */
+ Ndps = rate * 2;
+ /* NSyms = CEILING((SERVICE + 8*NBytes + TAIL) / Ndbps) */
+ nsyms =
+ CEIL((APHY_SERVICE_NBITS + 8 * mac_len + APHY_TAIL_NBITS),
+ Ndps);
+ dur += APHY_SYMBOL_TIME * nsyms;
+ if (wlc->band->bandtype == BRCM_BAND_2G)
+ dur += DOT11_OFDM_SIGNAL_EXTENSION;
+ } else {
+ /*
+ * calc # bits * 2 so factor of 2 in rate (1/2 mbps)
+ * will divide out
+ */
+ mac_len = mac_len * 8 * 2;
+ /* calc ceiling of bits/rate = microseconds of air time */
+ dur = (mac_len + rate - 1) / rate;
+ if (preamble_type & BRCMS_SHORT_PREAMBLE)
+ dur += BPHY_PLCP_SHORT_TIME;
+ else
+ dur += BPHY_PLCP_TIME;
+ }
+ return dur;
+}
+
static void brcms_c_write_inits(struct brcms_hardware *wlc_hw,
const struct d11init *inits)
{
}
}
+/* low-level band switch utility routine */
+static void brcms_c_setxband(struct brcms_hardware *wlc_hw, uint bandunit)
+{
+ BCMMSG(wlc_hw->wlc->wiphy, "wl%d: bandunit %d\n", wlc_hw->unit,
+ bandunit);
+
+ wlc_hw->band = wlc_hw->bandstate[bandunit];
+
+ /*
+ * BMAC_NOTE:
+ * until we eliminate need for wlc->band refs in low level code
+ */
+ wlc_hw->wlc->band = wlc_hw->wlc->bandstate[bandunit];
+
+ /* set gmode core flag */
+ if (wlc_hw->sbclk && !wlc_hw->noreset)
+ ai_core_cflags(wlc_hw->sih, SICF_GMODE,
+ ((bandunit == 0) ? SICF_GMODE : 0));
+}
+
/* switch to new band but leave it inactive */
static u32 brcms_c_setband_inact(struct brcms_c_info *wlc, uint bandunit)
{
return macintmask;
}
-/* Process received frames */
-/*
- * Return true if more frames need to be processed. false otherwise.
- * Param 'bound' indicates max. # frames to process before break out.
- */
+/* process an individual struct tx_status */
static bool
-brcms_b_recv(struct brcms_hardware *wlc_hw, uint fifo, bool bound)
+brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
{
struct sk_buff *p;
- struct sk_buff *head = NULL;
- struct sk_buff *tail = NULL;
- uint n = 0;
- uint bound_limit = bound ? RXBND : -1;
-
- BCMMSG(wlc_hw->wlc->wiphy, "wl%d\n", wlc_hw->unit);
- /* gather received frames */
- while ((p = dma_rx(wlc_hw->di[fifo]))) {
+ uint queue;
+ struct d11txh *txh;
+ struct scb *scb = NULL;
+ bool free_pdu;
+ int tx_rts, tx_frame_count, tx_rts_count;
+ uint totlen, supr_status;
+ bool lastframe;
+ struct ieee80211_hdr *h;
+ u16 mcl;
+ struct ieee80211_tx_info *tx_info;
+ struct ieee80211_tx_rate *txrate;
+ int i;
- if (!tail)
- head = tail = p;
- else {
- tail->prev = p;
- tail = p;
- }
+ /* discard intermediate indications for ucode with one legitimate case:
+ * e.g. if "useRTS" is set. ucode did a successful rts/cts exchange,
+ * but the subsequent tx of DATA failed. so it will start rts/cts
+ * from the beginning (resetting the rts transmission count)
+ */
+ if (!(txs->status & TX_STATUS_AMPDU)
+ && (txs->status & TX_STATUS_INTERMEDIATE)) {
+ wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n",
+ __func__);
+ return false;
+ }
- /* !give others some time to run! */
- if (++n >= bound_limit)
- break;
+ queue = txs->frameid & TXFID_QUEUE_MASK;
+ if (queue >= NFIFO) {
+ p = NULL;
+ goto fatal;
}
- /* post more rbufs */
- dma_rxfill(wlc_hw->di[fifo]);
-
- /* process each frame */
- while ((p = head) != NULL) {
- struct d11rxhdr_le *rxh_le;
- struct d11rxhdr *rxh;
- head = head->prev;
- p->prev = NULL;
-
- rxh_le = (struct d11rxhdr_le *)p->data;
- rxh = (struct d11rxhdr *)p->data;
-
- /* fixup rx header endianness */
- rxh->RxFrameSize = le16_to_cpu(rxh_le->RxFrameSize);
- rxh->PhyRxStatus_0 = le16_to_cpu(rxh_le->PhyRxStatus_0);
- rxh->PhyRxStatus_1 = le16_to_cpu(rxh_le->PhyRxStatus_1);
- rxh->PhyRxStatus_2 = le16_to_cpu(rxh_le->PhyRxStatus_2);
- rxh->PhyRxStatus_3 = le16_to_cpu(rxh_le->PhyRxStatus_3);
- rxh->PhyRxStatus_4 = le16_to_cpu(rxh_le->PhyRxStatus_4);
- rxh->PhyRxStatus_5 = le16_to_cpu(rxh_le->PhyRxStatus_5);
- rxh->RxStatus1 = le16_to_cpu(rxh_le->RxStatus1);
- rxh->RxStatus2 = le16_to_cpu(rxh_le->RxStatus2);
- rxh->RxTSFTime = le16_to_cpu(rxh_le->RxTSFTime);
- rxh->RxChan = le16_to_cpu(rxh_le->RxChan);
-
- brcms_c_recv(wlc_hw->wlc, p);
- }
-
- return n >= bound_limit;
-}
-
-/* process an individual struct tx_status */
-static bool
-brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
-{
- struct sk_buff *p;
- uint queue;
- struct d11txh *txh;
- struct scb *scb = NULL;
- bool free_pdu;
- int tx_rts, tx_frame_count, tx_rts_count;
- uint totlen, supr_status;
- bool lastframe;
- struct ieee80211_hdr *h;
- u16 mcl;
- struct ieee80211_tx_info *tx_info;
- struct ieee80211_tx_rate *txrate;
- int i;
-
- /* discard intermediate indications for ucode with one legitimate case:
- * e.g. if "useRTS" is set. ucode did a successful rts/cts exchange,
- * but the subsequent tx of DATA failed. so it will start rts/cts
- * from the beginning (resetting the rts transmission count)
- */
- if (!(txs->status & TX_STATUS_AMPDU)
- && (txs->status & TX_STATUS_INTERMEDIATE)) {
- wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n",
- __func__);
- return false;
- }
-
- queue = txs->frameid & TXFID_QUEUE_MASK;
- if (queue >= NFIFO) {
- p = NULL;
- goto fatal;
- }
-
- p = dma_getnexttxp(wlc->hw->di[queue], DMA_RANGE_TRANSMITTED);
- if (p == NULL)
- goto fatal;
+ p = dma_getnexttxp(wlc->hw->di[queue], DMA_RANGE_TRANSMITTED);
+ if (p == NULL)
+ goto fatal;
txh = (struct d11txh *) (p->data);
mcl = le16_to_cpu(txh->MacTxControlLow);
return morepending;
}
-/* second-level interrupt processing
- * Return true if another dpc needs to be re-scheduled. false otherwise.
- * Param 'bounded' indicates if applicable loops should be bounded.
- */
-bool brcms_c_dpc(struct brcms_c_info *wlc, bool bounded)
+static void brcms_c_tbtt(struct brcms_c_info *wlc)
{
- u32 macintstatus;
- struct brcms_hardware *wlc_hw = wlc->hw;
- struct d11regs __iomem *regs = wlc_hw->regs;
- struct wiphy *wiphy = wlc->wiphy;
-
- if (brcms_deviceremoved(wlc)) {
- wiphy_err(wiphy, "wl%d: %s: dead chip\n", wlc_hw->unit,
- __func__);
- brcms_down(wlc->wl);
- return false;
- }
-
- /* grab and clear the saved software intstatus bits */
- macintstatus = wlc->macintstatus;
- wlc->macintstatus = 0;
-
- BCMMSG(wlc->wiphy, "wl%d: macintstatus 0x%x\n",
- wlc_hw->unit, macintstatus);
-
- WARN_ON(macintstatus & MI_PRQ); /* PRQ Interrupt in non-MBSS */
-
- /* tx status */
- if (macintstatus & MI_TFS) {
- bool fatal;
- if (brcms_b_txstatus(wlc->hw, bounded, &fatal))
- wlc->macintstatus |= MI_TFS;
- if (fatal) {
- wiphy_err(wiphy, "MI_TFS: fatal\n");
- goto fatal;
- }
- }
-
- if (macintstatus & (MI_TBTT | MI_DTIM_TBTT))
- brcms_c_tbtt(wlc);
-
- /* ATIM window end */
- if (macintstatus & MI_ATIMWINEND) {
- BCMMSG(wlc->wiphy, "end of ATIM window\n");
- OR_REG(®s->maccommand, wlc->qvalid);
- wlc->qvalid = 0;
- }
-
- /*
- * received data or control frame, MI_DMAINT is
- * indication of RX_FIFO interrupt
- */
- if (macintstatus & MI_DMAINT)
- if (brcms_b_recv(wlc_hw, RX_FIFO, bounded))
- wlc->macintstatus |= MI_DMAINT;
-
- /* noise sample collected */
- if (macintstatus & MI_BG_NOISE)
- wlc_phy_noise_sample_intr(wlc_hw->band->pi);
-
- if (macintstatus & MI_GP0) {
- wiphy_err(wiphy, "wl%d: PSM microcode watchdog fired at %d "
- "(seconds). Resetting.\n", wlc_hw->unit, wlc_hw->now);
-
- printk_once("%s : PSM Watchdog, chipid 0x%x, chiprev 0x%x\n",
- __func__, wlc_hw->sih->chip,
- wlc_hw->sih->chiprev);
- /* big hammer */
- brcms_init(wlc->wl);
- }
-
- /* gptimer timeout */
- if (macintstatus & MI_TO)
- W_REG(®s->gptimer, 0);
-
- if (macintstatus & MI_RFDISABLE) {
- BCMMSG(wlc->wiphy, "wl%d: BMAC Detected a change on the"
- " RF Disable Input\n", wlc_hw->unit);
- brcms_rfkill_set_hw_state(wlc->wl);
- }
-
- /* send any enq'd tx packets. Just makes sure to jump start tx */
- if (!pktq_empty(&wlc->pkt_queue->q))
- brcms_c_send_q(wlc);
-
- /* it isn't done and needs to be resched if macintstatus is non-zero */
- return wlc->macintstatus != 0;
-
- fatal:
- brcms_init(wlc->wl);
- return wlc->macintstatus != 0;
+ if (!wlc->bsscfg->BSS)
+ /*
+ * DirFrmQ is now valid...defer setting until end
+ * of ATIM window
+ */
+ wlc->qvalid |= MCMD_DIRFRMQVAL;
}
/* set initial host flags value */
WARN_ON((R_REG(&wlc_hw->regs->maccontrol) & MCTL_EN_MAC) != 0);
}
-/* low-level band switch utility routine */
-void brcms_c_setxband(struct brcms_hardware *wlc_hw, uint bandunit)
-{
- BCMMSG(wlc_hw->wlc->wiphy, "wl%d: bandunit %d\n", wlc_hw->unit,
- bandunit);
-
- wlc_hw->band = wlc_hw->bandstate[bandunit];
-
- /*
- * BMAC_NOTE:
- * until we eliminate need for wlc->band refs in low level code
- */
- wlc_hw->wlc->band = wlc_hw->wlc->bandstate[bandunit];
-
- /* set gmode core flag */
- if (wlc_hw->sbclk && !wlc_hw->noreset)
- ai_core_cflags(wlc_hw->sih, SICF_GMODE,
- ((bandunit == 0) ? SICF_GMODE : 0));
-}
-
static bool brcms_c_isgoodchip(struct brcms_hardware *wlc_hw)
{
wlc_phy_antsel_type_set(wlc_hw->band->pi, antsel_type);
}
+static void brcms_c_fatal_error(struct brcms_c_info *wlc)
+{
+ wiphy_err(wlc->wiphy, "wl%d: fatal error, reinitializing\n",
+ wlc->pub->unit);
+ brcms_init(wlc->wl);
+}
+
static void brcms_b_fifoerrors(struct brcms_hardware *wlc_hw)
{
bool fatal = false;
}
}
-void brcms_c_coredisable(struct brcms_hardware *wlc_hw)
+static void brcms_c_coredisable(struct brcms_hardware *wlc_hw)
{
bool dev_gone;
}
}
+/* Copy a buffer to shared memory.
+ * SHM 'offset' needs to be an even address and
+ * Buffer length 'len' must be an even number of bytes
+ */
+static void brcms_c_copyto_shm(struct brcms_c_info *wlc, uint offset,
+ const void *buf, int len)
+{
+ brcms_b_copyto_objmem(wlc->hw, offset, buf, len, OBJADDR_SHM_SEL);
+}
+
static void brcms_b_retrylimit_upd(struct brcms_hardware *wlc_hw,
u16 SRL, u16 LRL)
{
* conditions under which the PM bit should be set in outgoing frames
* and STAY_AWAKE is meaningful
*/
-bool brcms_c_ps_allowed(struct brcms_c_info *wlc)
+static bool brcms_c_ps_allowed(struct brcms_c_info *wlc)
{
struct brcms_bss_cfg *cfg = wlc->bsscfg;
return true;
}
+static void brcms_c_statsupd(struct brcms_c_info *wlc)
+{
+ int i;
+ struct macstat macstats;
+#ifdef BCMDBG
+ u16 delta;
+ u16 rxf0ovfl;
+ u16 txfunfl[NFIFO];
+#endif /* BCMDBG */
+
+ /* if driver down, make no sense to update stats */
+ if (!wlc->pub->up)
+ return;
+
+#ifdef BCMDBG
+ /* save last rx fifo 0 overflow count */
+ rxf0ovfl = wlc->core->macstat_snapshot->rxf0ovfl;
+
+ /* save last tx fifo underflow count */
+ for (i = 0; i < NFIFO; i++)
+ txfunfl[i] = wlc->core->macstat_snapshot->txfunfl[i];
+#endif /* BCMDBG */
+
+ /* Read mac stats from contiguous shared memory */
+ brcms_b_copyfrom_objmem(wlc->hw, M_UCODE_MACSTAT, &macstats,
+ sizeof(struct macstat), OBJADDR_SHM_SEL);
+
+#ifdef BCMDBG
+ /* check for rx fifo 0 overflow */
+ delta = (u16) (wlc->core->macstat_snapshot->rxf0ovfl - rxf0ovfl);
+ if (delta)
+ wiphy_err(wlc->wiphy, "wl%d: %u rx fifo 0 overflows!\n",
+ wlc->pub->unit, delta);
+
+ /* check for tx fifo underflows */
+ for (i = 0; i < NFIFO; i++) {
+ delta =
+ (u16) (wlc->core->macstat_snapshot->txfunfl[i] -
+ txfunfl[i]);
+ if (delta)
+ wiphy_err(wlc->wiphy, "wl%d: %u tx fifo %d underflows!"
+ "\n", wlc->pub->unit, delta, i);
+ }
+#endif /* BCMDBG */
+
+ /* merge counters from dma module */
+ for (i = 0; i < NFIFO; i++) {
+ if (wlc->hw->di[i])
+ dma_counterreset(wlc->hw->di[i]);
+ }
+}
+
static void brcms_b_reset(struct brcms_hardware *wlc_hw)
{
BCMMSG(wlc_hw->wlc->wiphy, "wl%d\n", wlc_hw->unit);
brcms_b_reset(wlc->hw);
}
-void brcms_c_fatal_error(struct brcms_c_info *wlc)
-{
- wiphy_err(wlc->wiphy, "wl%d: fatal error, reinitializing\n",
- wlc->pub->unit);
- brcms_init(wlc->wl);
-}
-
/* Return the channel the driver should initialize during brcms_c_init.
* the channel may have to be changed from the currently configured channel
* if other configurations are in conflict (bandlocked, 11n mode disabled,
chanspec);
brcms_c_stf_ss_update(wlc, wlc->band);
-
}
-static void brcms_c_bandinit_ordered(struct brcms_c_info *wlc,
- u16 chanspec)
+static void
+brcms_default_rateset(struct brcms_c_info *wlc, struct brcms_c_rateset *rs)
+{
+ brcms_c_rateset_default(rs, NULL, wlc->band->phytype,
+ wlc->band->bandtype, false, BRCMS_RATE_MASK_FULL,
+ (bool) (wlc->pub->_n_enab & SUPPORT_11N),
+ brcms_chspec_bw(wlc->default_bss->chanspec),
+ wlc->stf->txstreams);
+}
+
+/* derive wlc->band->basic_rate[] table from 'rateset' */
+static void brcms_c_rate_lookup_init(struct brcms_c_info *wlc,
+ struct brcms_c_rateset *rateset)
+{
+ u8 rate;
+ u8 mandatory;
+ u8 cck_basic = 0;
+ u8 ofdm_basic = 0;
+ u8 *br = wlc->band->basic_rate;
+ uint i;
+
+ /* incoming rates are in 500kbps units as in 802.11 Supported Rates */
+ memset(br, 0, BRCM_MAXRATE + 1);
+
+ /* For each basic rate in the rates list, make an entry in the
+ * best basic lookup.
+ */
+ for (i = 0; i < rateset->count; i++) {
+ /* only make an entry for a basic rate */
+ if (!(rateset->rates[i] & BRCMS_RATE_FLAG))
+ continue;
+
+ /* mask off basic bit */
+ rate = (rateset->rates[i] & BRCMS_RATE_MASK);
+
+ if (rate > BRCM_MAXRATE) {
+ wiphy_err(wlc->wiphy, "brcms_c_rate_lookup_init: "
+ "invalid rate 0x%X in rate set\n",
+ rateset->rates[i]);
+ continue;
+ }
+
+ br[rate] = rate;
+ }
+
+ /* The rate lookup table now has non-zero entries for each
+ * basic rate, equal to the basic rate: br[basicN] = basicN
+ *
+ * To look up the best basic rate corresponding to any
+ * particular rate, code can use the basic_rate table
+ * like this
+ *
+ * basic_rate = wlc->band->basic_rate[tx_rate]
+ *
+ * Make sure there is a best basic rate entry for
+ * every rate by walking up the table from low rates
+ * to high, filling in holes in the lookup table
+ */
+
+ for (i = 0; i < wlc->band->hw_rateset.count; i++) {
+ rate = wlc->band->hw_rateset.rates[i];
+
+ if (br[rate] != 0) {
+ /* This rate is a basic rate.
+ * Keep track of the best basic rate so far by
+ * modulation type.
+ */
+ if (is_ofdm_rate(rate))
+ ofdm_basic = rate;
+ else
+ cck_basic = rate;
+
+ continue;
+ }
+
+ /* This rate is not a basic rate so figure out the
+ * best basic rate less than this rate and fill in
+ * the hole in the table
+ */
+
+ br[rate] = is_ofdm_rate(rate) ? ofdm_basic : cck_basic;
+
+ if (br[rate] != 0)
+ continue;
+
+ if (is_ofdm_rate(rate)) {
+ /*
+ * In 11g and 11a, the OFDM mandatory rates
+ * are 6, 12, and 24 Mbps
+ */
+ if (rate >= BRCM_RATE_24M)
+ mandatory = BRCM_RATE_24M;
+ else if (rate >= BRCM_RATE_12M)
+ mandatory = BRCM_RATE_12M;
+ else
+ mandatory = BRCM_RATE_6M;
+ } else {
+ /* In 11b, all CCK rates are mandatory 1 - 11 Mbps */
+ mandatory = rate;
+ }
+
+ br[rate] = mandatory;
+ }
+}
+
+static void brcms_c_bandinit_ordered(struct brcms_c_info *wlc,
+ u16 chanspec)
{
struct brcms_c_rateset default_rateset;
uint parkband;
brcms_c_set_phy_chanspec(wlc, chanspec);
}
+static void brcms_c_mac_bcn_promisc(struct brcms_c_info *wlc)
+{
+ if (wlc->bcnmisc_monitor)
+ brcms_b_mctrl(wlc->hw, MCTL_BCNS_PROMISC, MCTL_BCNS_PROMISC);
+ else
+ brcms_b_mctrl(wlc->hw, MCTL_BCNS_PROMISC, 0);
+}
+
+void brcms_c_mac_bcn_promisc_change(struct brcms_c_info *wlc, bool promisc)
+{
+ wlc->bcnmisc_monitor = promisc;
+ brcms_c_mac_bcn_promisc(wlc);
+}
+
+/* set or clear maccontrol bits MCTL_PROMISC and MCTL_KEEPCONTROL */
+static void brcms_c_mac_promisc(struct brcms_c_info *wlc)
+{
+ u32 promisc_bits = 0;
+
+ /*
+ * promiscuous mode just sets MCTL_PROMISC
+ * Note: APs get all BSS traffic without the need to set
+ * the MCTL_PROMISC bit since all BSS data traffic is
+ * directed at the AP
+ */
+ if (wlc->pub->promisc)
+ promisc_bits |= MCTL_PROMISC;
+
+ /* monitor mode needs both MCTL_PROMISC and MCTL_KEEPCONTROL
+ * Note: monitor mode also needs MCTL_BCNS_PROMISC, but that is
+ * handled in brcms_c_mac_bcn_promisc()
+ */
+ if (wlc->monitor)
+ promisc_bits |= MCTL_PROMISC | MCTL_KEEPCONTROL;
+
+ brcms_b_mctrl(wlc->hw, MCTL_PROMISC | MCTL_KEEPCONTROL, promisc_bits);
+}
+
/*
* ucode, hwmac update
* Channel dependent updates for ucode and hw
brcms_c_mac_promisc(wlc);
}
+static void brcms_c_write_rate_shm(struct brcms_c_info *wlc, u8 rate,
+ u8 basic_rate)
+{
+ u8 phy_rate, index;
+ u8 basic_phy_rate, basic_index;
+ u16 dir_table, basic_table;
+ u16 basic_ptr;
+
+ /* Shared memory address for the table we are reading */
+ dir_table = is_ofdm_rate(basic_rate) ? M_RT_DIRMAP_A : M_RT_DIRMAP_B;
+
+ /* Shared memory address for the table we are writing */
+ basic_table = is_ofdm_rate(rate) ? M_RT_BBRSMAP_A : M_RT_BBRSMAP_B;
+
+ /*
+ * for a given rate, the LS-nibble of the PLCP SIGNAL field is
+ * the index into the rate table.
+ */
+ phy_rate = rate_info[rate] & BRCMS_RATE_MASK;
+ basic_phy_rate = rate_info[basic_rate] & BRCMS_RATE_MASK;
+ index = phy_rate & 0xf;
+ basic_index = basic_phy_rate & 0xf;
+
+ /* Find the SHM pointer to the ACK rate entry by looking in the
+ * Direct-map Table
+ */
+ basic_ptr = brcms_b_read_shm(wlc->hw, (dir_table + basic_index * 2));
+
+ /* Update the SHM BSS-basic-rate-set mapping table with the pointer
+ * to the correct basic rate for the given incoming rate
+ */
+ brcms_b_write_shm(wlc->hw, (basic_table + index * 2), basic_ptr);
+}
+
+static const struct brcms_c_rateset *
+brcms_c_rateset_get_hwrs(struct brcms_c_info *wlc)
+{
+ const struct brcms_c_rateset *rs_dflt;
+
+ if (BRCMS_PHY_11N_CAP(wlc->band)) {
+ if (wlc->band->bandtype == BRCM_BAND_5G)
+ rs_dflt = &ofdm_mimo_rates;
+ else
+ rs_dflt = &cck_ofdm_mimo_rates;
+ } else if (wlc->band->gmode)
+ rs_dflt = &cck_ofdm_rates;
+ else
+ rs_dflt = &cck_rates;
+
+ return rs_dflt;
+}
+
+static void brcms_c_set_ratetable(struct brcms_c_info *wlc)
+{
+ const struct brcms_c_rateset *rs_dflt;
+ struct brcms_c_rateset rs;
+ u8 rate, basic_rate;
+ uint i;
+
+ rs_dflt = brcms_c_rateset_get_hwrs(wlc);
+
+ brcms_c_rateset_copy(rs_dflt, &rs);
+ brcms_c_rateset_mcs_upd(&rs, wlc->stf->txstreams);
+
+ /* walk the phy rate table and update SHM basic rate lookup table */
+ for (i = 0; i < rs.count; i++) {
+ rate = rs.rates[i] & BRCMS_RATE_MASK;
+
+ /* for a given rate brcms_basic_rate returns the rate at
+ * which a response ACK/CTS should be sent.
+ */
+ basic_rate = brcms_basic_rate(wlc, rate);
+ if (basic_rate == 0)
+ /* This should only happen if we are using a
+ * restricted rateset.
+ */
+ basic_rate = rs.rates[0] & BRCMS_RATE_MASK;
+
+ brcms_c_write_rate_shm(wlc, rate, basic_rate);
+ }
+}
+
/* band-specific init */
static void brcms_c_bsinit(struct brcms_c_info *wlc)
{
}
}
-void brcms_c_init(struct brcms_c_info *wlc)
+/* push sw hps and wake state through hardware */
+static void brcms_c_set_ps_ctrl(struct brcms_c_info *wlc)
{
- struct d11regs __iomem *regs;
- u16 chanspec;
- bool mute = false;
-
- BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
+ u32 v1, v2;
+ bool hps;
+ bool awake_before;
- regs = wlc->regs;
+ hps = brcms_c_ps_allowed(wlc);
- /*
- * This will happen if a big-hammer was executed. In
- * that case, we want to go back to the channel that
- * we were on and not new channel
- */
- if (wlc->pub->associated)
- chanspec = wlc->home_chanspec;
- else
- chanspec = brcms_c_init_chanspec(wlc);
+ BCMMSG(wlc->wiphy, "wl%d: hps %d\n", wlc->pub->unit, hps);
- brcms_b_init(wlc->hw, chanspec, mute);
+ v1 = R_REG(&wlc->regs->maccontrol);
+ v2 = MCTL_WAKE;
+ if (hps)
+ v2 |= MCTL_HPS;
- /* update beacon listen interval */
- brcms_c_bcn_li_upd(wlc);
+ brcms_b_mctrl(wlc->hw, MCTL_WAKE | MCTL_HPS, v2);
- /* write ethernet address to core */
- brcms_c_set_mac(wlc->bsscfg);
- brcms_c_set_bssid(wlc->bsscfg);
-
- /* Update tsf_cfprep if associated and up */
- if (wlc->pub->associated && wlc->bsscfg->up) {
- u32 bi;
-
- /* get beacon period and convert to uS */
- bi = wlc->bsscfg->current_bss->beacon_period << 10;
- /*
- * update since init path would reset
- * to default value
- */
- W_REG(®s->tsf_cfprep,
- (bi << CFPREP_CBI_SHIFT));
-
- /* Update maccontrol PM related bits */
- brcms_c_set_ps_ctrl(wlc);
- }
-
- brcms_c_bandinit_ordered(wlc, chanspec);
-
- /* init probe response timeout */
- brcms_b_write_shm(wlc->hw, M_PRS_MAXTIME, wlc->prb_resp_timeout);
-
- /* init max burst txop (framebursting) */
- brcms_b_write_shm(wlc->hw, M_MBURST_TXOP,
- (wlc->
- _rifs ? (EDCF_AC_VO_TXOP_AP << 5) : MAXFRAMEBURST_TXOP));
-
- /* initialize maximum allowed duty cycle */
- brcms_c_duty_cycle_set(wlc, wlc->tx_duty_cycle_ofdm, true, true);
- brcms_c_duty_cycle_set(wlc, wlc->tx_duty_cycle_cck, false, true);
-
- /*
- * Update some shared memory locations related to
- * max AMPDU size allowed to received
- */
- brcms_c_ampdu_shm_upd(wlc->ampdu);
-
- /* band-specific inits */
- brcms_c_bsinit(wlc);
-
- /* Enable EDCF mode (while the MAC is suspended) */
- OR_REG(®s->ifs_ctl, IFS_USEEDCF);
- brcms_c_edcf_setparams(wlc, false);
-
- /* Init precedence maps for empty FIFOs */
- brcms_c_tx_prec_map_init(wlc);
-
- /* read the ucode version if we have not yet done so */
- if (wlc->ucode_rev == 0) {
- wlc->ucode_rev =
- brcms_b_read_shm(wlc->hw, M_BOM_REV_MAJOR) << NBITS(u16);
- wlc->ucode_rev |= brcms_b_read_shm(wlc->hw, M_BOM_REV_MINOR);
- }
-
- /* ..now really unleash hell (allow the MAC out of suspend) */
- brcms_c_enable_mac(wlc);
-
- /* clear tx flow control */
- brcms_c_txflowcontrol_reset(wlc);
-
- /* enable the RF Disable Delay timer */
- W_REG(&wlc->regs->rfdisabledly, RFDISABLE_DEFAULT);
-
- /* initialize mpc delay */
- wlc->mpc_delay_off = wlc->mpc_dlycnt = BRCMS_MPC_MIN_DELAYCNT;
-
- /*
- * Initialize WME parameters; if they haven't been set by some other
- * mechanism (IOVar, etc) then read them from the hardware.
- */
- if (GFIELD(wlc->wme_retries[0], EDCF_SHORT) == 0) {
- /* Uninitialized; read from HW */
- int ac;
-
- for (ac = 0; ac < AC_COUNT; ac++)
- wlc->wme_retries[ac] =
- brcms_b_read_shm(wlc->hw, M_AC_TXLMT_ADDR(ac));
- }
-}
-
-void brcms_c_mac_bcn_promisc_change(struct brcms_c_info *wlc, bool promisc)
-{
- wlc->bcnmisc_monitor = promisc;
- brcms_c_mac_bcn_promisc(wlc);
-}
-
-void brcms_c_mac_bcn_promisc(struct brcms_c_info *wlc)
-{
- if (wlc->bcnmisc_monitor)
- brcms_b_mctrl(wlc->hw, MCTL_BCNS_PROMISC, MCTL_BCNS_PROMISC);
- else
- brcms_b_mctrl(wlc->hw, MCTL_BCNS_PROMISC, 0);
-}
-
-/* set or clear maccontrol bits MCTL_PROMISC and MCTL_KEEPCONTROL */
-void brcms_c_mac_promisc(struct brcms_c_info *wlc)
-{
- u32 promisc_bits = 0;
-
- /*
- * promiscuous mode just sets MCTL_PROMISC
- * Note: APs get all BSS traffic without the need to set
- * the MCTL_PROMISC bit since all BSS data traffic is
- * directed at the AP
- */
- if (wlc->pub->promisc)
- promisc_bits |= MCTL_PROMISC;
-
- /* monitor mode needs both MCTL_PROMISC and MCTL_KEEPCONTROL
- * Note: monitor mode also needs MCTL_BCNS_PROMISC, but that is
- * handled in brcms_c_mac_bcn_promisc()
- */
- if (wlc->monitor)
- promisc_bits |= MCTL_PROMISC | MCTL_KEEPCONTROL;
-
- brcms_b_mctrl(wlc->hw, MCTL_PROMISC | MCTL_KEEPCONTROL, promisc_bits);
-}
-
-/* push sw hps and wake state through hardware */
-void brcms_c_set_ps_ctrl(struct brcms_c_info *wlc)
-{
- u32 v1, v2;
- bool hps;
- bool awake_before;
-
- hps = brcms_c_ps_allowed(wlc);
-
- BCMMSG(wlc->wiphy, "wl%d: hps %d\n", wlc->pub->unit, hps);
-
- v1 = R_REG(&wlc->regs->maccontrol);
- v2 = MCTL_WAKE;
- if (hps)
- v2 |= MCTL_HPS;
-
- brcms_b_mctrl(wlc->hw, MCTL_WAKE | MCTL_HPS, v2);
-
- awake_before = ((v1 & MCTL_WAKE) || ((v1 & MCTL_HPS) == 0));
+ awake_before = ((v1 & MCTL_WAKE) || ((v1 & MCTL_HPS) == 0));
if (!awake_before)
brcms_b_wait_for_wake(wlc->hw);
-
}
/*
* Write this BSS config's MAC address to core.
* Updates RXE match engine.
*/
-int brcms_c_set_mac(struct brcms_bss_cfg *bsscfg)
+static int brcms_c_set_mac(struct brcms_bss_cfg *bsscfg)
{
int err = 0;
struct brcms_c_info *wlc = bsscfg->wlc;
/* Write the BSS config's BSSID address to core (set_bssid in d11procs.tcl).
* Updates RXE match engine.
*/
-void brcms_c_set_bssid(struct brcms_bss_cfg *bsscfg)
+static void brcms_c_set_bssid(struct brcms_bss_cfg *bsscfg)
{
/* we need to update BSSID in RXE match registers */
brcms_c_set_addrmatch(bsscfg->wlc, RCM_BSSID_OFFSET, bsscfg->BSSID);
* Suspend the the MAC and update the slot timing
* for standard 11b/g (20us slots) or shortslot 11g (9us slots).
*/
-void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
+static void brcms_c_switch_shortslot(struct brcms_c_info *wlc, bool shortslot)
{
/* use the override if it is set */
if (wlc->shortslot_override != BRCMS_SHORTSLOT_AUTO)
brcms_b_set_shortslot(wlc->hw, shortslot);
}
-void brcms_c_set_home_chanspec(struct brcms_c_info *wlc, u16 chanspec)
+static void brcms_c_set_home_chanspec(struct brcms_c_info *wlc, u16 chanspec)
{
if (wlc->home_chanspec != chanspec) {
wlc->home_chanspec = chanspec;
brcms_c_bsinit(wlc);
}
-void brcms_c_set_chanspec(struct brcms_c_info *wlc, u16 chanspec)
+static void brcms_c_set_chanspec(struct brcms_c_info *wlc, u16 chanspec)
{
uint bandunit;
bool switchband = false;
brcms_c_ucode_mac_upd(wlc);
}
-u32 brcms_c_lowest_basic_rspec(struct brcms_c_info *wlc,
- struct brcms_c_rateset *rs)
-{
- u32 lowest_basic_rspec;
- uint i;
-
- /* Use the lowest basic rate */
- lowest_basic_rspec = rs->rates[0] & BRCMS_RATE_MASK;
- for (i = 0; i < rs->count; i++) {
- if (rs->rates[i] & BRCMS_RATE_FLAG) {
- lowest_basic_rspec = rs->rates[i] & BRCMS_RATE_MASK;
- break;
- }
- }
-
- /*
- * pick siso/cdd as default for OFDM (note no basic
- * rate MCSs are supported yet)
- */
- if (is_ofdm_rate(lowest_basic_rspec))
- lowest_basic_rspec |= (wlc->stf->ss_opmode << RSPEC_STF_SHIFT);
-
- return lowest_basic_rspec;
-}
-
/*
* This function changes the phytxctl for beacon based on current
* beacon ratespec AND txant setting as per this table:
brcms_add_timer(wlc->radio_timer, TIMER_INTERVAL_RADIOCHK, true);
}
-void brcms_c_radio_disable(struct brcms_c_info *wlc)
+static void brcms_c_radio_disable(struct brcms_c_info *wlc)
{
if (!wlc->pub->up) {
brcms_c_down_led_upd(wlc);
brcms_up(wlc->wl);
}
-bool brcms_c_radio_monitor_stop(struct brcms_c_info *wlc)
+static bool brcms_c_radio_monitor_stop(struct brcms_c_info *wlc)
{
if (!wlc->radio_monitor)
return true;
wlc_phy_watchdog(wlc_hw->band->pi);
}
+static void brcms_c_radio_mpc_upd(struct brcms_c_info *wlc)
+{
+ bool mpc_radio, radio_state;
+
+ /*
+ * Clear the WL_RADIO_MPC_DISABLE bit when mpc feature is disabled
+ * in case the WL_RADIO_MPC_DISABLE bit was set. Stop the radio
+ * monitor also when WL_RADIO_MPC_DISABLE is the only reason that
+ * the radio is going down.
+ */
+ if (!wlc->mpc) {
+ if (!wlc->pub->radio_disabled)
+ return;
+ mboolclr(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE);
+ brcms_c_radio_upd(wlc);
+ if (!wlc->pub->radio_disabled)
+ brcms_c_radio_monitor_stop(wlc);
+ return;
+ }
+
+ /*
+ * sync ismpc logic with WL_RADIO_MPC_DISABLE bit in
+ * wlc->pub->radio_disabled to go ON, always call radio_upd
+ * synchronously to go OFF, postpone radio_upd to later when
+ * context is safe(e.g. watchdog)
+ */
+ radio_state =
+ (mboolisset(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE) ? OFF :
+ ON);
+ mpc_radio = (brcms_c_ismpc(wlc) == true) ? OFF : ON;
+
+ if (radio_state == ON && mpc_radio == OFF)
+ wlc->mpc_delay_off = wlc->mpc_dlycnt;
+ else if (radio_state == OFF && mpc_radio == ON) {
+ mboolclr(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE);
+ brcms_c_radio_upd(wlc);
+ if (wlc->mpc_offcnt < BRCMS_MPC_THRESHOLD)
+ wlc->mpc_dlycnt = BRCMS_MPC_MAX_DELAYCNT;
+ else
+ wlc->mpc_dlycnt = BRCMS_MPC_MIN_DELAYCNT;
+ }
+ /*
+ * Below logic is meant to capture the transition from mpc off
+ * to mpc on for reasons other than wlc->mpc_delay_off keeping
+ * the mpc off. In that case reset wlc->mpc_delay_off to
+ * wlc->mpc_dlycnt, so that we restart the countdown of mpc_delay_off
+ */
+ if ((wlc->prev_non_delay_mpc == false) &&
+ (brcms_c_is_non_delay_mpc(wlc) == true) && wlc->mpc_delay_off)
+ wlc->mpc_delay_off = wlc->mpc_dlycnt;
+
+ wlc->prev_non_delay_mpc = brcms_c_is_non_delay_mpc(wlc);
+}
+
/* common watchdog code */
static void brcms_c_watchdog(void *arg)
{
brcms_c_watchdog(arg);
}
-bool brcms_c_timers_init(struct brcms_c_info *wlc, int unit)
+static bool brcms_c_timers_init(struct brcms_c_info *wlc, int unit)
{
wlc->wdtimer = brcms_init_timer(wlc->wl, brcms_c_watchdog_by_timer,
wlc, "watchdog");
* Initialize brcms_c_info default values ...
* may get overrides later in this function
*/
-void brcms_c_info_init(struct brcms_c_info *wlc, int unit)
+static void brcms_c_info_init(struct brcms_c_info *wlc, int unit)
{
int i;
}
}
-/*
- * The common driver entry routine. Error codes should be unique
- */
-struct brcms_c_info *
-brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
- bool piomode, void __iomem *regsva, struct pci_dev *btparam,
- uint *perr)
+static void brcms_c_timers_deinit(struct brcms_c_info *wlc)
{
- struct brcms_c_info *wlc;
- uint err = 0;
- uint i, j;
- struct brcms_pub *pub;
-
- /* allocate struct brcms_c_info state and its substructures */
- wlc = (struct brcms_c_info *) brcms_c_attach_malloc(unit, &err, device);
- if (wlc == NULL)
- goto fail;
- wlc->wiphy = wl->wiphy;
- pub = wlc->pub;
-
-#if defined(BCMDBG)
- wlc_info_dbg = wlc;
-#endif
+ /* free timer state */
+ if (wlc->wdtimer) {
+ brcms_free_timer(wlc->wdtimer);
+ wlc->wdtimer = NULL;
+ }
+ if (wlc->radio_timer) {
+ brcms_free_timer(wlc->radio_timer);
+ wlc->radio_timer = NULL;
+ }
+}
- wlc->band = wlc->bandstate[0];
- wlc->core = wlc->corestate;
- wlc->wl = wl;
- pub->unit = unit;
- pub->_piomode = piomode;
- wlc->bandinit_pending = false;
+static void brcms_c_detach_module(struct brcms_c_info *wlc)
+{
+ if (wlc->asi) {
+ brcms_c_antsel_detach(wlc->asi);
+ wlc->asi = NULL;
+ }
- /* populate struct brcms_c_info with default values */
- brcms_c_info_init(wlc, unit);
+ if (wlc->ampdu) {
+ brcms_c_ampdu_detach(wlc->ampdu);
+ wlc->ampdu = NULL;
+ }
- /* update sta/ap related parameters */
- brcms_c_ap_upd(wlc);
-
- /*
- * low level attach steps(all hw accesses go
- * inside, no more in rest of the attach)
- */
- err = brcms_b_attach(wlc, vendor, device, unit, piomode, regsva,
- btparam);
- if (err)
- goto fail;
-
- brcms_c_protection_upd(wlc, BRCMS_PROT_N_PAM_OVR, OFF);
-
- pub->phy_11ncapable = BRCMS_PHY_11N_CAP(wlc->band);
-
- /* disable allowed duty cycle */
- wlc->tx_duty_cycle_ofdm = 0;
- wlc->tx_duty_cycle_cck = 0;
-
- brcms_c_stf_phy_chain_calc(wlc);
-
- /* txchain 1: txant 0, txchain 2: txant 1 */
- if (BRCMS_ISNPHY(wlc->band) && (wlc->stf->txstreams == 1))
- wlc->stf->txant = wlc->stf->hw_txchain - 1;
-
- /* push to BMAC driver */
- wlc_phy_stf_chain_init(wlc->band->pi, wlc->stf->hw_txchain,
- wlc->stf->hw_rxchain);
-
- /* pull up some info resulting from the low attach */
- for (i = 0; i < NFIFO; i++)
- wlc->core->txavail[i] = wlc->hw->txavail[i];
-
- memcpy(&wlc->perm_etheraddr, &wlc->hw->etheraddr, ETH_ALEN);
- memcpy(&pub->cur_etheraddr, &wlc->hw->etheraddr, ETH_ALEN);
-
- for (j = 0; j < wlc->pub->_nbands; j++) {
- wlc->band = wlc->bandstate[j];
-
- if (!brcms_c_attach_stf_ant_init(wlc)) {
- err = 24;
- goto fail;
- }
-
- /* default contention windows size limits */
- wlc->band->CWmin = APHY_CWMIN;
- wlc->band->CWmax = PHY_CWMAX;
-
- /* init gmode value */
- if (wlc->band->bandtype == BRCM_BAND_2G) {
- wlc->band->gmode = GMODE_AUTO;
- brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER,
- wlc->band->gmode);
- }
-
- /* init _n_enab supported mode */
- if (BRCMS_PHY_11N_CAP(wlc->band)) {
- pub->_n_enab = SUPPORT_11N;
- brcms_c_protection_upd(wlc, BRCMS_PROT_N_USER,
- ((pub->_n_enab ==
- SUPPORT_11N) ? WL_11N_2x2 :
- WL_11N_3x3));
- }
-
- /* init per-band default rateset, depend on band->gmode */
- brcms_default_rateset(wlc, &wlc->band->defrateset);
-
- /* fill in hw_rateset */
- brcms_c_rateset_filter(&wlc->band->defrateset,
- &wlc->band->hw_rateset, false,
- BRCMS_RATES_CCK_OFDM, BRCMS_RATE_MASK,
- (bool) (wlc->pub->_n_enab & SUPPORT_11N));
- }
-
- /*
- * update antenna config due to
- * wlc->stf->txant/txchain/ant_rx_ovr change
- */
- brcms_c_stf_phy_txant_upd(wlc);
-
- /* attach each modules */
- err = brcms_c_attach_module(wlc);
- if (err != 0)
- goto fail;
-
- if (!brcms_c_timers_init(wlc, unit)) {
- wiphy_err(wl->wiphy, "wl%d: %s: init_timer failed\n", unit,
- __func__);
- err = 32;
- goto fail;
- }
-
- /* depend on rateset, gmode */
- wlc->cmi = brcms_c_channel_mgr_attach(wlc);
- if (!wlc->cmi) {
- wiphy_err(wl->wiphy, "wl%d: %s: channel_mgr_attach failed"
- "\n", unit, __func__);
- err = 33;
- goto fail;
- }
-
- /* init default when all parameters are ready, i.e. ->rateset */
- brcms_c_bss_default_init(wlc);
-
- /*
- * Complete the wlc default state initializations..
- */
-
- /* allocate our initial queue */
- wlc->pkt_queue = brcms_c_txq_alloc(wlc);
- if (wlc->pkt_queue == NULL) {
- wiphy_err(wl->wiphy, "wl%d: %s: failed to malloc tx queue\n",
- unit, __func__);
- err = 100;
- goto fail;
- }
-
- wlc->bsscfg->wlc = wlc;
-
- wlc->mimoft = FT_HT;
- wlc->mimo_40txbw = AUTO;
- wlc->ofdm_40txbw = AUTO;
- wlc->cck_40txbw = AUTO;
- brcms_c_update_mimo_band_bwcap(wlc, BRCMS_N_BW_20IN2G_40IN5G);
-
- /* Set default values of SGI */
- if (BRCMS_SGI_CAP_PHY(wlc)) {
- brcms_c_ht_update_sgi_rx(wlc, (BRCMS_N_SGI_20 |
- BRCMS_N_SGI_40));
- } else if (BRCMS_ISSSLPNPHY(wlc->band)) {
- brcms_c_ht_update_sgi_rx(wlc, (BRCMS_N_SGI_20 |
- BRCMS_N_SGI_40));
- } else {
- brcms_c_ht_update_sgi_rx(wlc, 0);
- }
-
- /* initialize radio_mpc_disable according to wlc->mpc */
- brcms_c_radio_mpc_upd(wlc);
- brcms_b_antsel_set(wlc->hw, wlc->asi->antsel_avail);
-
- if (perr)
- *perr = 0;
-
- return wlc;
-
- fail:
- wiphy_err(wl->wiphy, "wl%d: %s: failed with err %d\n",
- unit, __func__, err);
- if (wlc)
- brcms_c_detach(wlc);
-
- if (perr)
- *perr = err;
- return NULL;
-}
-
-static void brcms_c_timers_deinit(struct brcms_c_info *wlc)
-{
- /* free timer state */
- if (wlc->wdtimer) {
- brcms_free_timer(wlc->wdtimer);
- wlc->wdtimer = NULL;
- }
- if (wlc->radio_timer) {
- brcms_free_timer(wlc->radio_timer);
- wlc->radio_timer = NULL;
- }
-}
-
-static void brcms_c_detach_module(struct brcms_c_info *wlc)
-{
- if (wlc->asi) {
- brcms_c_antsel_detach(wlc->asi);
- wlc->asi = NULL;
- }
-
- if (wlc->ampdu) {
- brcms_c_ampdu_detach(wlc->ampdu);
- wlc->ampdu = NULL;
- }
-
- brcms_c_stf_detach(wlc);
-}
+ brcms_c_stf_detach(wlc);
+}
/*
* low level detach
}
/* update state that depends on the current value of "ap" */
-void brcms_c_ap_upd(struct brcms_c_info *wlc)
+static void brcms_c_ap_upd(struct brcms_c_info *wlc)
{
/* STA-BSS; short capable */
wlc->PLCPHdr_override = BRCMS_PLCP_SHORT;
wlc->mpc = true;
}
-/*
- * return true if Minimum Power Consumption should
- * be entered, false otherwise
- */
-bool brcms_c_is_non_delay_mpc(struct brcms_c_info *wlc)
-{
- return false;
-}
-
-bool brcms_c_ismpc(struct brcms_c_info *wlc)
-{
- return (wlc->mpc_delay_off == 0) && (brcms_c_is_non_delay_mpc(wlc));
-}
-
-void brcms_c_radio_mpc_upd(struct brcms_c_info *wlc)
-{
- bool mpc_radio, radio_state;
-
- /*
- * Clear the WL_RADIO_MPC_DISABLE bit when mpc feature is disabled
- * in case the WL_RADIO_MPC_DISABLE bit was set. Stop the radio
- * monitor also when WL_RADIO_MPC_DISABLE is the only reason that
- * the radio is going down.
- */
- if (!wlc->mpc) {
- if (!wlc->pub->radio_disabled)
- return;
- mboolclr(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE);
- brcms_c_radio_upd(wlc);
- if (!wlc->pub->radio_disabled)
- brcms_c_radio_monitor_stop(wlc);
- return;
- }
-
- /*
- * sync ismpc logic with WL_RADIO_MPC_DISABLE bit in
- * wlc->pub->radio_disabled to go ON, always call radio_upd
- * synchronously to go OFF, postpone radio_upd to later when
- * context is safe(e.g. watchdog)
- */
- radio_state =
- (mboolisset(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE) ? OFF :
- ON);
- mpc_radio = (brcms_c_ismpc(wlc) == true) ? OFF : ON;
-
- if (radio_state == ON && mpc_radio == OFF)
- wlc->mpc_delay_off = wlc->mpc_dlycnt;
- else if (radio_state == OFF && mpc_radio == ON) {
- mboolclr(wlc->pub->radio_disabled, WL_RADIO_MPC_DISABLE);
- brcms_c_radio_upd(wlc);
- if (wlc->mpc_offcnt < BRCMS_MPC_THRESHOLD)
- wlc->mpc_dlycnt = BRCMS_MPC_MAX_DELAYCNT;
- else
- wlc->mpc_dlycnt = BRCMS_MPC_MIN_DELAYCNT;
- }
- /*
- * Below logic is meant to capture the transition from mpc off
- * to mpc on for reasons other than wlc->mpc_delay_off keeping
- * the mpc off. In that case reset wlc->mpc_delay_off to
- * wlc->mpc_dlycnt, so that we restart the countdown of mpc_delay_off
- */
- if ((wlc->prev_non_delay_mpc == false) &&
- (brcms_c_is_non_delay_mpc(wlc) == true) && wlc->mpc_delay_off)
- wlc->mpc_delay_off = wlc->mpc_dlycnt;
-
- wlc->prev_non_delay_mpc = brcms_c_is_non_delay_mpc(wlc);
-}
/* Initialize just the hardware when coming out of POR or S3/S5 system states */
static void brcms_b_hw_up(struct brcms_hardware *wlc_hw)
{
#endif /* defined(BCMDBG) */
}
-void brcms_c_statsupd(struct brcms_c_info *wlc)
-{
- int i;
- struct macstat macstats;
-#ifdef BCMDBG
- u16 delta;
- u16 rxf0ovfl;
- u16 txfunfl[NFIFO];
-#endif /* BCMDBG */
-
- /* if driver down, make no sense to update stats */
- if (!wlc->pub->up)
- return;
-
-#ifdef BCMDBG
- /* save last rx fifo 0 overflow count */
- rxf0ovfl = wlc->core->macstat_snapshot->rxf0ovfl;
-
- /* save last tx fifo underflow count */
- for (i = 0; i < NFIFO; i++)
- txfunfl[i] = wlc->core->macstat_snapshot->txfunfl[i];
-#endif /* BCMDBG */
-
- /* Read mac stats from contiguous shared memory */
- brcms_b_copyfrom_objmem(wlc->hw, M_UCODE_MACSTAT, &macstats,
- sizeof(struct macstat), OBJADDR_SHM_SEL);
-
-#ifdef BCMDBG
- /* check for rx fifo 0 overflow */
- delta = (u16) (wlc->core->macstat_snapshot->rxf0ovfl - rxf0ovfl);
- if (delta)
- wiphy_err(wlc->wiphy, "wl%d: %u rx fifo 0 overflows!\n",
- wlc->pub->unit, delta);
-
- /* check for tx fifo underflows */
- for (i = 0; i < NFIFO; i++) {
- delta =
- (u16) (wlc->core->macstat_snapshot->txfunfl[i] -
- txfunfl[i]);
- if (delta)
- wiphy_err(wlc->wiphy, "wl%d: %u tx fifo %d underflows!"
- "\n", wlc->pub->unit, delta, i);
- }
-#endif /* BCMDBG */
-
- /* merge counters from dma module */
- for (i = 0; i < NFIFO; i++) {
- if (wlc->hw->di[i])
- dma_counterreset(wlc->hw->di[i]);
- }
-}
-
-bool brcms_c_chipmatch(u16 vendor, u16 device)
+bool brcms_c_chipmatch(u16 vendor, u16 device)
{
if (vendor != PCI_VENDOR_ID_BROADCOM) {
pr_err("chipmatch: unknown vendor id %04x\n", vendor);
return 2 * brcms_b_read_shm(wlc_hw, table_ptr + (index * 2));
}
-/* Callback for device removed */
-
-/*
- * Attempts to queue a packet onto a multiple-precedence queue,
- * if necessary evicting a lower precedence packet from the queue.
- *
- * 'prec' is the precedence number that has already been mapped
- * from the packet priority.
- *
- * Returns true if packet consumed (queued), false if not.
- */
-static bool brcms_c_prec_enq(struct brcms_c_info *wlc, struct pktq *q,
- struct sk_buff *pkt, int prec)
-{
- return brcms_c_prec_enq_head(wlc, q, pkt, prec, false);
-}
-
-bool
+static bool
brcms_c_prec_enq_head(struct brcms_c_info *wlc, struct pktq *q,
struct sk_buff *pkt, int prec, bool head)
{
return true;
}
+/*
+ * Attempts to queue a packet onto a multiple-precedence queue,
+ * if necessary evicting a lower precedence packet from the queue.
+ *
+ * 'prec' is the precedence number that has already been mapped
+ * from the packet priority.
+ *
+ * Returns true if packet consumed (queued), false if not.
+ */
+static bool brcms_c_prec_enq(struct brcms_c_info *wlc, struct pktq *q,
+ struct sk_buff *pkt, int prec)
+{
+ return brcms_c_prec_enq_head(wlc, q, pkt, prec, false);
+}
+
void brcms_c_txq_enq(struct brcms_c_info *wlc, struct scb *scb,
struct sk_buff *sdu, uint prec)
{
return mac_len;
}
+/*
+ * Return true if the specified rate is supported by the specified band.
+ * BRCM_BAND_AUTO indicates the current band.
+ */
+static bool brcms_c_valid_rate(struct brcms_c_info *wlc, u32 rspec, int band,
+ bool verbose)
+{
+ struct brcms_c_rateset *hw_rateset;
+ uint i;
+
+ if ((band == BRCM_BAND_AUTO) || (band == wlc->band->bandtype))
+ hw_rateset = &wlc->band->hw_rateset;
+ else if (wlc->pub->_nbands > 1)
+ hw_rateset = &wlc->bandstate[OTHERBANDUNIT(wlc)]->hw_rateset;
+ else
+ /* other band specified and we are a single band device */
+ return false;
+
+ /* check if this is a mimo rate */
+ if (is_mcs_rate(rspec)) {
+ if ((rspec & RSPEC_RATE_MASK) >= MCS_TABLE_SIZE)
+ goto error;
+
+ return isset(hw_rateset->mcs, (rspec & RSPEC_RATE_MASK));
+ }
+
+ for (i = 0; i < hw_rateset->count; i++)
+ if (hw_rateset->rates[i] == rspec2rate(rspec))
+ return true;
+ error:
+ if (verbose)
+ wiphy_err(wlc->wiphy, "wl%d: valid_rate: rate spec 0x%x "
+ "not in hw_rateset\n", wlc->pub->unit, rspec);
+
+ return false;
+}
+
static u32
mac80211_wlc_set_nrate(struct brcms_c_info *wlc, struct brcms_band *cur_band,
u32 int_val)
}
/*
- * Add struct d11txh, struct cck_phy_hdr.
- *
- * 'p' data must start with 802.11 MAC header
- * 'p' must allow enough bytes of local headers to be "pushed" onto the packet
- *
- * headroom == D11_PHY_HDR_LEN + D11_TXH_LEN (D11_TXH_LEN is now 104 bytes)
- *
+ * Compute PLCP, but only requires actual rate and length of pkt.
+ * Rate is given in the driver standard multiple of 500 kbps.
+ * le is set for 11 Mbps rate if necessary.
+ * Broken out for PRQ.
*/
-static u16
-brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw,
- struct sk_buff *p, struct scb *scb, uint frag,
- uint nfrags, uint queue, uint next_frag_len)
-{
- struct ieee80211_hdr *h;
- struct d11txh *txh;
- u8 *plcp, plcp_fallback[D11_PHY_HDR_LEN];
- int len, phylen, rts_phylen;
- u16 mch, phyctl, xfts, mainrates;
- u16 seq = 0, mcl = 0, status = 0, frameid = 0;
- u32 rspec[2] = { BRCM_RATE_1M, BRCM_RATE_1M };
- u32 rts_rspec[2] = { BRCM_RATE_1M, BRCM_RATE_1M };
- bool use_rts = false;
- bool use_cts = false;
- bool use_rifs = false;
- bool short_preamble[2] = { false, false };
- u8 preamble_type[2] = { BRCMS_LONG_PREAMBLE, BRCMS_LONG_PREAMBLE };
- u8 rts_preamble_type[2] = { BRCMS_LONG_PREAMBLE, BRCMS_LONG_PREAMBLE };
- u8 *rts_plcp, rts_plcp_fallback[D11_PHY_HDR_LEN];
- struct ieee80211_rts *rts = NULL;
- bool qos;
- uint ac;
- bool hwtkmic = false;
- u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ;
-#define ANTCFG_NONE 0xFF
- u8 antcfg = ANTCFG_NONE;
- u8 fbantcfg = ANTCFG_NONE;
- uint phyctl1_stf = 0;
- u16 durid = 0;
- struct ieee80211_tx_rate *txrate[2];
- int k;
- struct ieee80211_tx_info *tx_info;
- bool is_mcs;
- u16 mimo_txbw;
- u8 mimo_preamble_type;
- /* locate 802.11 MAC header */
- h = (struct ieee80211_hdr *)(p->data);
- qos = ieee80211_is_data_qos(h->frame_control);
+static void brcms_c_cck_plcp_set(struct brcms_c_info *wlc, int rate_500,
+ uint length, u8 *plcp)
+{
+ u16 usec = 0;
+ u8 le = 0;
- /* compute length of frame in bytes for use in PLCP computations */
- len = brcmu_pkttotlen(p);
- phylen = len + FCS_LEN;
+ switch (rate_500) {
+ case BRCM_RATE_1M:
+ usec = length << 3;
+ break;
+ case BRCM_RATE_2M:
+ usec = length << 2;
+ break;
+ case BRCM_RATE_5M5:
+ usec = (length << 4) / 11;
+ if ((length << 4) - (usec * 11) > 0)
+ usec++;
+ break;
+ case BRCM_RATE_11M:
+ usec = (length << 3) / 11;
+ if ((length << 3) - (usec * 11) > 0) {
+ usec++;
+ if ((usec * 11) - (length << 3) >= 8)
+ le = D11B_PLCP_SIGNAL_LE;
+ }
+ break;
- /* Get tx_info */
- tx_info = IEEE80211_SKB_CB(p);
+ default:
+ wiphy_err(wlc->wiphy,
+ "brcms_c_cck_plcp_set: unsupported rate %d\n",
+ rate_500);
+ rate_500 = BRCM_RATE_1M;
+ usec = length << 3;
+ break;
+ }
+ /* PLCP signal byte */
+ plcp[0] = rate_500 * 5; /* r (500kbps) * 5 == r (100kbps) */
+ /* PLCP service byte */
+ plcp[1] = (u8) (le | D11B_PLCP_SIGNAL_LOCKED);
+ /* PLCP length u16, little endian */
+ plcp[2] = usec & 0xff;
+ plcp[3] = (usec >> 8) & 0xff;
+ /* PLCP CRC16 */
+ plcp[4] = 0;
+ plcp[5] = 0;
+}
- /* add PLCP */
- plcp = skb_push(p, D11_PHY_HDR_LEN);
+/* Rate: 802.11 rate code, length: PSDU length in octets */
+static void brcms_c_compute_mimo_plcp(u32 rspec, uint length, u8 *plcp)
+{
+ u8 mcs = (u8) (rspec & RSPEC_RATE_MASK);
+ plcp[0] = mcs;
+ if (rspec_is40mhz(rspec) || (mcs == 32))
+ plcp[0] |= MIMO_PLCP_40MHZ;
+ BRCMS_SET_MIMO_PLCP_LEN(plcp, length);
+ plcp[3] = rspec_mimoplcp3(rspec); /* rspec already holds this byte */
+ plcp[3] |= 0x7; /* set smoothing, not sounding ppdu & reserved */
+ plcp[4] = 0; /* number of extension spatial streams bit 0 & 1 */
+ plcp[5] = 0;
+}
- /* add Broadcom tx descriptor header */
- txh = (struct d11txh *) skb_push(p, D11_TXH_LEN);
- memset(txh, 0, D11_TXH_LEN);
+/* Rate: 802.11 rate code, length: PSDU length in octets */
+static void
+brcms_c_compute_ofdm_plcp(u32 rspec, u32 length, u8 *plcp)
+{
+ u8 rate_signal;
+ u32 tmp = 0;
+ int rate = rspec2rate(rspec);
- /* setup frameid */
- if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
- /* non-AP STA should never use BCMC queue */
- if (queue == TX_BCMC_FIFO) {
- wiphy_err(wlc->wiphy, "wl%d: %s: ASSERT queue == "
- "TX_BCMC!\n", wlc->pub->unit, __func__);
- frameid = bcmc_fid_generate(wlc, NULL, txh);
- } else {
- /* Increment the counter for first fragment */
- if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
- scb->seqnum[p->priority]++;
+ /*
+ * encode rate per 802.11a-1999 sec 17.3.4.1, with lsb
+ * transmitted first
+ */
+ rate_signal = rate_info[rate] & BRCMS_RATE_MASK;
+ memset(plcp, 0, D11_PHY_HDR_LEN);
+ D11A_PHY_HDR_SRATE((struct ofdm_phy_hdr *) plcp, rate_signal);
- /* extract fragment number from frame first */
- seq = le16_to_cpu(h->seq_ctrl) & FRAGNUM_MASK;
- seq |= (scb->seqnum[p->priority] << SEQNUM_SHIFT);
+ tmp = (length & 0xfff) << 5;
+ plcp[2] |= (tmp >> 16) & 0xff;
+ plcp[1] |= (tmp >> 8) & 0xff;
+ plcp[0] |= tmp & 0xff;
+}
+
+/* Rate: 802.11 rate code, length: PSDU length in octets */
+static void brcms_c_compute_cck_plcp(struct brcms_c_info *wlc, u32 rspec,
+ uint length, u8 *plcp)
+{
+ int rate = rspec2rate(rspec);
+
+ brcms_c_cck_plcp_set(wlc, rate, length, plcp);
+}
+
+static void
+brcms_c_compute_plcp(struct brcms_c_info *wlc, u32 rspec,
+ uint length, u8 *plcp)
+{
+ if (is_mcs_rate(rspec))
+ brcms_c_compute_mimo_plcp(rspec, length, plcp);
+ else if (is_ofdm_rate(rspec))
+ brcms_c_compute_ofdm_plcp(rspec, length, plcp);
+ else
+ brcms_c_compute_cck_plcp(wlc, rspec, length, plcp);
+}
+
+/* brcms_c_compute_rtscts_dur()
+ *
+ * Calculate the 802.11 MAC header DUR field for an RTS or CTS frame
+ * DUR for normal RTS/CTS w/ frame = 3 SIFS + 1 CTS + next frame time + 1 ACK
+ * DUR for CTS-TO-SELF w/ frame = 2 SIFS + next frame time + 1 ACK
+ *
+ * cts cts-to-self or rts/cts
+ * rts_rate rts or cts rate in unit of 500kbps
+ * rate next MPDU rate in unit of 500kbps
+ * frame_len next MPDU frame length in bytes
+ */
+u16
+brcms_c_compute_rtscts_dur(struct brcms_c_info *wlc, bool cts_only,
+ u32 rts_rate,
+ u32 frame_rate, u8 rts_preamble_type,
+ u8 frame_preamble_type, uint frame_len, bool ba)
+{
+ u16 dur, sifs;
+
+ sifs = get_sifs(wlc->band);
+
+ if (!cts_only) {
+ /* RTS/CTS */
+ dur = 3 * sifs;
+ dur +=
+ (u16) brcms_c_calc_cts_time(wlc, rts_rate,
+ rts_preamble_type);
+ } else {
+ /* CTS-TO-SELF */
+ dur = 2 * sifs;
+ }
+
+ dur +=
+ (u16) brcms_c_calc_frame_time(wlc, frame_rate, frame_preamble_type,
+ frame_len);
+ if (ba)
+ dur +=
+ (u16) brcms_c_calc_ba_time(wlc, frame_rate,
+ BRCMS_SHORT_PREAMBLE);
+ else
+ dur +=
+ (u16) brcms_c_calc_ack_time(wlc, frame_rate,
+ frame_preamble_type);
+ return dur;
+}
+
+static u16 brcms_c_phytxctl1_calc(struct brcms_c_info *wlc, u32 rspec)
+{
+ u16 phyctl1 = 0;
+ u16 bw;
+
+ if (BRCMS_ISLCNPHY(wlc->band)) {
+ bw = PHY_TXC1_BW_20MHZ;
+ } else {
+ bw = rspec_get_bw(rspec);
+ /* 10Mhz is not supported yet */
+ if (bw < PHY_TXC1_BW_20MHZ) {
+ wiphy_err(wlc->wiphy, "phytxctl1_calc: bw %d is "
+ "not supported yet, set to 20L\n", bw);
+ bw = PHY_TXC1_BW_20MHZ;
+ }
+ }
+
+ if (is_mcs_rate(rspec)) {
+ uint mcs = rspec & RSPEC_RATE_MASK;
+
+ /* bw, stf, coding-type is part of rspec_phytxbyte2 returns */
+ phyctl1 = rspec_phytxbyte2(rspec);
+ /* set the upper byte of phyctl1 */
+ phyctl1 |= (mcs_table[mcs].tx_phy_ctl3 << 8);
+ } else if (is_cck_rate(rspec) && !BRCMS_ISLCNPHY(wlc->band)
+ && !BRCMS_ISSSLPNPHY(wlc->band)) {
+ /*
+ * In CCK mode LPPHY overloads OFDM Modulation bits with CCK
+ * Data Rate. Eventually MIMOPHY would also be converted to
+ * this format
+ */
+ /* 0 = 1Mbps; 1 = 2Mbps; 2 = 5.5Mbps; 3 = 11Mbps */
+ phyctl1 = (bw | (rspec_stf(rspec) << PHY_TXC1_MODE_SHIFT));
+ } else { /* legacy OFDM/CCK */
+ s16 phycfg;
+ /* get the phyctl byte from rate phycfg table */
+ phycfg = brcms_c_rate_legacy_phyctl(rspec2rate(rspec));
+ if (phycfg == -1) {
+ wiphy_err(wlc->wiphy, "phytxctl1_calc: wrong "
+ "legacy OFDM/CCK rate\n");
+ phycfg = 0;
+ }
+ /* set the upper byte of phyctl1 */
+ phyctl1 =
+ (bw | (phycfg << 8) |
+ (rspec_stf(rspec) << PHY_TXC1_MODE_SHIFT));
+ }
+ return phyctl1;
+}
+
+/*
+ * Add struct d11txh, struct cck_phy_hdr.
+ *
+ * 'p' data must start with 802.11 MAC header
+ * 'p' must allow enough bytes of local headers to be "pushed" onto the packet
+ *
+ * headroom == D11_PHY_HDR_LEN + D11_TXH_LEN (D11_TXH_LEN is now 104 bytes)
+ *
+ */
+static u16
+brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw,
+ struct sk_buff *p, struct scb *scb, uint frag,
+ uint nfrags, uint queue, uint next_frag_len)
+{
+ struct ieee80211_hdr *h;
+ struct d11txh *txh;
+ u8 *plcp, plcp_fallback[D11_PHY_HDR_LEN];
+ int len, phylen, rts_phylen;
+ u16 mch, phyctl, xfts, mainrates;
+ u16 seq = 0, mcl = 0, status = 0, frameid = 0;
+ u32 rspec[2] = { BRCM_RATE_1M, BRCM_RATE_1M };
+ u32 rts_rspec[2] = { BRCM_RATE_1M, BRCM_RATE_1M };
+ bool use_rts = false;
+ bool use_cts = false;
+ bool use_rifs = false;
+ bool short_preamble[2] = { false, false };
+ u8 preamble_type[2] = { BRCMS_LONG_PREAMBLE, BRCMS_LONG_PREAMBLE };
+ u8 rts_preamble_type[2] = { BRCMS_LONG_PREAMBLE, BRCMS_LONG_PREAMBLE };
+ u8 *rts_plcp, rts_plcp_fallback[D11_PHY_HDR_LEN];
+ struct ieee80211_rts *rts = NULL;
+ bool qos;
+ uint ac;
+ bool hwtkmic = false;
+ u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ;
+#define ANTCFG_NONE 0xFF
+ u8 antcfg = ANTCFG_NONE;
+ u8 fbantcfg = ANTCFG_NONE;
+ uint phyctl1_stf = 0;
+ u16 durid = 0;
+ struct ieee80211_tx_rate *txrate[2];
+ int k;
+ struct ieee80211_tx_info *tx_info;
+ bool is_mcs;
+ u16 mimo_txbw;
+ u8 mimo_preamble_type;
+
+ /* locate 802.11 MAC header */
+ h = (struct ieee80211_hdr *)(p->data);
+ qos = ieee80211_is_data_qos(h->frame_control);
+
+ /* compute length of frame in bytes for use in PLCP computations */
+ len = brcmu_pkttotlen(p);
+ phylen = len + FCS_LEN;
+
+ /* Get tx_info */
+ tx_info = IEEE80211_SKB_CB(p);
+
+ /* add PLCP */
+ plcp = skb_push(p, D11_PHY_HDR_LEN);
+
+ /* add Broadcom tx descriptor header */
+ txh = (struct d11txh *) skb_push(p, D11_TXH_LEN);
+ memset(txh, 0, D11_TXH_LEN);
+
+ /* setup frameid */
+ if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
+ /* non-AP STA should never use BCMC queue */
+ if (queue == TX_BCMC_FIFO) {
+ wiphy_err(wlc->wiphy, "wl%d: %s: ASSERT queue == "
+ "TX_BCMC!\n", wlc->pub->unit, __func__);
+ frameid = bcmc_fid_generate(wlc, NULL, txh);
+ } else {
+ /* Increment the counter for first fragment */
+ if (tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
+ scb->seqnum[p->priority]++;
+
+ /* extract fragment number from frame first */
+ seq = le16_to_cpu(h->seq_ctrl) & FRAGNUM_MASK;
+ seq |= (scb->seqnum[p->priority] << SEQNUM_SHIFT);
h->seq_ctrl = cpu_to_le16(seq);
frameid = ((seq << TXFID_SEQ_SHIFT) & TXFID_SEQ_MASK) |
wiphy_err(wlc->wiphy, "txfifo: fatal, toss frames !!!\n");
}
-/*
- * Compute PLCP, but only requires actual rate and length of pkt.
- * Rate is given in the driver standard multiple of 500 kbps.
- * le is set for 11 Mbps rate if necessary.
- * Broken out for PRQ.
- */
-
-static void brcms_c_cck_plcp_set(struct brcms_c_info *wlc, int rate_500,
- uint length, u8 *plcp)
+u32
+brcms_c_rspec_to_rts_rspec(struct brcms_c_info *wlc, u32 rspec,
+ bool use_rspec, u16 mimo_ctlchbw)
{
- u16 usec = 0;
- u8 le = 0;
+ u32 rts_rspec = 0;
- switch (rate_500) {
- case BRCM_RATE_1M:
- usec = length << 3;
- break;
- case BRCM_RATE_2M:
- usec = length << 2;
- break;
- case BRCM_RATE_5M5:
- usec = (length << 4) / 11;
- if ((length << 4) - (usec * 11) > 0)
- usec++;
- break;
- case BRCM_RATE_11M:
- usec = (length << 3) / 11;
- if ((length << 3) - (usec * 11) > 0) {
- usec++;
- if ((usec * 11) - (length << 3) >= 8)
- le = D11B_PLCP_SIGNAL_LE;
- }
- break;
-
- default:
- wiphy_err(wlc->wiphy,
- "brcms_c_cck_plcp_set: unsupported rate %d\n",
- rate_500);
- rate_500 = BRCM_RATE_1M;
- usec = length << 3;
- break;
- }
- /* PLCP signal byte */
- plcp[0] = rate_500 * 5; /* r (500kbps) * 5 == r (100kbps) */
- /* PLCP service byte */
- plcp[1] = (u8) (le | D11B_PLCP_SIGNAL_LOCKED);
- /* PLCP length u16, little endian */
- plcp[2] = usec & 0xff;
- plcp[3] = (usec >> 8) & 0xff;
- /* PLCP CRC16 */
- plcp[4] = 0;
- plcp[5] = 0;
-}
-
-/* Rate: 802.11 rate code, length: PSDU length in octets */
-static void brcms_c_compute_mimo_plcp(u32 rspec, uint length, u8 *plcp)
-{
- u8 mcs = (u8) (rspec & RSPEC_RATE_MASK);
- plcp[0] = mcs;
- if (rspec_is40mhz(rspec) || (mcs == 32))
- plcp[0] |= MIMO_PLCP_40MHZ;
- BRCMS_SET_MIMO_PLCP_LEN(plcp, length);
- plcp[3] = rspec_mimoplcp3(rspec); /* rspec already holds this byte */
- plcp[3] |= 0x7; /* set smoothing, not sounding ppdu & reserved */
- plcp[4] = 0; /* number of extension spatial streams bit 0 & 1 */
- plcp[5] = 0;
-}
-
-/* Rate: 802.11 rate code, length: PSDU length in octets */
-static void
-brcms_c_compute_ofdm_plcp(u32 rspec, u32 length, u8 *plcp)
-{
- u8 rate_signal;
- u32 tmp = 0;
- int rate = rspec2rate(rspec);
-
- /*
- * encode rate per 802.11a-1999 sec 17.3.4.1, with lsb
- * transmitted first
- */
- rate_signal = rate_info[rate] & BRCMS_RATE_MASK;
- memset(plcp, 0, D11_PHY_HDR_LEN);
- D11A_PHY_HDR_SRATE((struct ofdm_phy_hdr *) plcp, rate_signal);
-
- tmp = (length & 0xfff) << 5;
- plcp[2] |= (tmp >> 16) & 0xff;
- plcp[1] |= (tmp >> 8) & 0xff;
- plcp[0] |= tmp & 0xff;
-}
-
-/* Rate: 802.11 rate code, length: PSDU length in octets */
-static void brcms_c_compute_cck_plcp(struct brcms_c_info *wlc, u32 rspec,
- uint length, u8 *plcp)
-{
- int rate = rspec2rate(rspec);
-
- brcms_c_cck_plcp_set(wlc, rate, length, plcp);
-}
-
-void
-brcms_c_compute_plcp(struct brcms_c_info *wlc, u32 rspec,
- uint length, u8 *plcp)
-{
- if (is_mcs_rate(rspec))
- brcms_c_compute_mimo_plcp(rspec, length, plcp);
- else if (is_ofdm_rate(rspec))
- brcms_c_compute_ofdm_plcp(rspec, length, plcp);
- else
- brcms_c_compute_cck_plcp(wlc, rspec, length, plcp);
-}
-
-/* brcms_c_compute_rtscts_dur()
- *
- * Calculate the 802.11 MAC header DUR field for an RTS or CTS frame
- * DUR for normal RTS/CTS w/ frame = 3 SIFS + 1 CTS + next frame time + 1 ACK
- * DUR for CTS-TO-SELF w/ frame = 2 SIFS + next frame time + 1 ACK
- *
- * cts cts-to-self or rts/cts
- * rts_rate rts or cts rate in unit of 500kbps
- * rate next MPDU rate in unit of 500kbps
- * frame_len next MPDU frame length in bytes
- */
-u16
-brcms_c_compute_rtscts_dur(struct brcms_c_info *wlc, bool cts_only,
- u32 rts_rate,
- u32 frame_rate, u8 rts_preamble_type,
- u8 frame_preamble_type, uint frame_len, bool ba)
-{
- u16 dur, sifs;
-
- sifs = get_sifs(wlc->band);
-
- if (!cts_only) {
- /* RTS/CTS */
- dur = 3 * sifs;
- dur +=
- (u16) brcms_c_calc_cts_time(wlc, rts_rate,
- rts_preamble_type);
- } else {
- /* CTS-TO-SELF */
- dur = 2 * sifs;
- }
-
- dur +=
- (u16) brcms_c_calc_frame_time(wlc, frame_rate, frame_preamble_type,
- frame_len);
- if (ba)
- dur +=
- (u16) brcms_c_calc_ba_time(wlc, frame_rate,
- BRCMS_SHORT_PREAMBLE);
- else
- dur +=
- (u16) brcms_c_calc_ack_time(wlc, frame_rate,
- frame_preamble_type);
- return dur;
-}
-
-u16 brcms_c_phytxctl1_calc(struct brcms_c_info *wlc, u32 rspec)
-{
- u16 phyctl1 = 0;
- u16 bw;
-
- if (BRCMS_ISLCNPHY(wlc->band)) {
- bw = PHY_TXC1_BW_20MHZ;
- } else {
- bw = rspec_get_bw(rspec);
- /* 10Mhz is not supported yet */
- if (bw < PHY_TXC1_BW_20MHZ) {
- wiphy_err(wlc->wiphy, "phytxctl1_calc: bw %d is "
- "not supported yet, set to 20L\n", bw);
- bw = PHY_TXC1_BW_20MHZ;
- }
- }
-
- if (is_mcs_rate(rspec)) {
- uint mcs = rspec & RSPEC_RATE_MASK;
-
- /* bw, stf, coding-type is part of rspec_phytxbyte2 returns */
- phyctl1 = rspec_phytxbyte2(rspec);
- /* set the upper byte of phyctl1 */
- phyctl1 |= (mcs_table[mcs].tx_phy_ctl3 << 8);
- } else if (is_cck_rate(rspec) && !BRCMS_ISLCNPHY(wlc->band)
- && !BRCMS_ISSSLPNPHY(wlc->band)) {
- /*
- * In CCK mode LPPHY overloads OFDM Modulation bits with CCK
- * Data Rate. Eventually MIMOPHY would also be converted to
- * this format
- */
- /* 0 = 1Mbps; 1 = 2Mbps; 2 = 5.5Mbps; 3 = 11Mbps */
- phyctl1 = (bw | (rspec_stf(rspec) << PHY_TXC1_MODE_SHIFT));
- } else { /* legacy OFDM/CCK */
- s16 phycfg;
- /* get the phyctl byte from rate phycfg table */
- phycfg = brcms_c_rate_legacy_phyctl(rspec2rate(rspec));
- if (phycfg == -1) {
- wiphy_err(wlc->wiphy, "phytxctl1_calc: wrong "
- "legacy OFDM/CCK rate\n");
- phycfg = 0;
- }
- /* set the upper byte of phyctl1 */
- phyctl1 =
- (bw | (phycfg << 8) |
- (rspec_stf(rspec) << PHY_TXC1_MODE_SHIFT));
- }
- return phyctl1;
-}
-
-u32
-brcms_c_rspec_to_rts_rspec(struct brcms_c_info *wlc, u32 rspec,
- bool use_rspec, u16 mimo_ctlchbw)
-{
- u32 rts_rspec = 0;
-
- if (use_rspec)
- /* use frame rate as rts rate */
- rts_rspec = rspec;
- else if (wlc->band->gmode && wlc->protection->_g && !is_cck_rate(rspec))
- /* Use 11Mbps as the g protection RTS target rate and fallback.
- * Use the brcms_basic_rate() lookup to find the best basic rate
- * under the target in case 11 Mbps is not Basic.
- * 6 and 9 Mbps are not usually selected by rate selection, but
- * even if the OFDM rate we are protecting is 6 or 9 Mbps, 11
- * is more robust.
- */
- rts_rspec = brcms_basic_rate(wlc, BRCM_RATE_11M);
- else
- /* calculate RTS rate and fallback rate based on the frame rate
- * RTS must be sent at a basic rate since it is a
- * control frame, sec 9.6 of 802.11 spec
- */
- rts_rspec = brcms_basic_rate(wlc, rspec);
+ if (use_rspec)
+ /* use frame rate as rts rate */
+ rts_rspec = rspec;
+ else if (wlc->band->gmode && wlc->protection->_g && !is_cck_rate(rspec))
+ /* Use 11Mbps as the g protection RTS target rate and fallback.
+ * Use the brcms_basic_rate() lookup to find the best basic rate
+ * under the target in case 11 Mbps is not Basic.
+ * 6 and 9 Mbps are not usually selected by rate selection, but
+ * even if the OFDM rate we are protecting is 6 or 9 Mbps, 11
+ * is more robust.
+ */
+ rts_rspec = brcms_basic_rate(wlc, BRCM_RATE_11M);
+ else
+ /* calculate RTS rate and fallback rate based on the frame rate
+ * RTS must be sent at a basic rate since it is a
+ * control frame, sec 9.6 of 802.11 spec
+ */
+ rts_rspec = brcms_basic_rate(wlc, rspec);
if (BRCMS_PHY_11N_CAP(wlc->band)) {
/* set rts txbw to correct side band */
return rts_rspec;
}
-void brcms_c_tbtt(struct brcms_c_info *wlc)
-{
- if (!wlc->bsscfg->BSS)
- /*
- * DirFrmQ is now valid...defer setting until end
- * of ATIM window
- */
- wlc->qvalid |= MCMD_DIRFRMQVAL;
-}
-
void
brcms_c_txfifo_complete(struct brcms_c_info *wlc, uint fifo, s8 txpktpend)
{
}
/* Update beacon listen interval in shared memory */
-void brcms_c_bcn_li_upd(struct brcms_c_info *wlc)
+static void brcms_c_bcn_li_upd(struct brcms_c_info *wlc)
{
/* wake up every DTIM is the default */
if (wlc->bcn_li_dtim == 1)
ieee80211_rx_irqsafe(wlc->pub->ieee_hw, p);
}
-/* Process received frames */
-/*
- * Return true if more frames need to be processed. false otherwise.
- * Param 'bound' indicates max. # frames to process before break out.
+/* calculate frame duration for Mixed-mode L-SIG spoofing, return
+ * number of bytes goes in the length field
+ *
+ * Formula given by HT PHY Spec v 1.13
+ * len = 3(nsyms + nstream + 3) - 3
*/
-void brcms_c_recv(struct brcms_c_info *wlc, struct sk_buff *p)
+u16
+brcms_c_calc_lsig_len(struct brcms_c_info *wlc, u32 ratespec,
+ uint mac_len)
{
- struct d11rxhdr *rxh;
- struct ieee80211_hdr *h;
- uint len;
- bool is_amsdu;
-
- BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
-
- /* frame starts with rxhdr */
- rxh = (struct d11rxhdr *) (p->data);
+ uint nsyms, len = 0, kNdps;
- /* strip off rxhdr */
- skb_pull(p, BRCMS_HWRXOFF);
+ BCMMSG(wlc->wiphy, "wl%d: rate %d, len%d\n",
+ wlc->pub->unit, rspec2rate(ratespec), mac_len);
- /* MAC inserts 2 pad bytes for a4 headers or QoS or A-MSDU subframes */
- if (rxh->RxStatus1 & RXS_PBPRES) {
- if (p->len < 2) {
- wiphy_err(wlc->wiphy, "wl%d: recv: rcvd runt of "
- "len %d\n", wlc->pub->unit, p->len);
- goto toss;
- }
- skb_pull(p, 2);
- }
+ if (is_mcs_rate(ratespec)) {
+ uint mcs = ratespec & RSPEC_RATE_MASK;
+ int tot_streams = (mcs_2_txstreams(mcs) + 1) +
+ rspec_stc(ratespec);
- h = (struct ieee80211_hdr *)(p->data + D11_PHY_HDR_LEN);
- len = p->len;
-
- if (rxh->RxStatus1 & RXS_FCSERR) {
- if (wlc->pub->mac80211_state & MAC80211_PROMISC_BCNS) {
- wiphy_err(wlc->wiphy, "FCSERR while scanning******* -"
- " tossing\n");
- goto toss;
- } else {
- wiphy_err(wlc->wiphy, "RCSERR!!!\n");
- goto toss;
- }
- }
-
- /* check received pkt has at least frame control field */
- if (len < D11_PHY_HDR_LEN + sizeof(h->frame_control))
- goto toss;
-
- /* not supporting A-MSDU */
- is_amsdu = rxh->RxStatus2 & RXS_AMSDU_MASK;
- if (is_amsdu)
- goto toss;
-
- brcms_c_recvctl(wlc, rxh, p);
- return;
-
- toss:
- brcmu_pkt_buf_free_skb(p);
-}
-
-/* calculate frame duration for Mixed-mode L-SIG spoofing, return
- * number of bytes goes in the length field
- *
- * Formula given by HT PHY Spec v 1.13
- * len = 3(nsyms + nstream + 3) - 3
- */
-u16
-brcms_c_calc_lsig_len(struct brcms_c_info *wlc, u32 ratespec,
- uint mac_len)
-{
- uint nsyms, len = 0, kNdps;
-
- BCMMSG(wlc->wiphy, "wl%d: rate %d, len%d\n",
- wlc->pub->unit, rspec2rate(ratespec), mac_len);
-
- if (is_mcs_rate(ratespec)) {
- uint mcs = ratespec & RSPEC_RATE_MASK;
- int tot_streams = (mcs_2_txstreams(mcs) + 1) +
- rspec_stc(ratespec);
-
- /*
- * the payload duration calculation matches that
- * of regular ofdm
- */
- /* 1000Ndbps = kbps * 4 */
- kNdps = mcs_2_rate(mcs, rspec_is40mhz(ratespec),
- rspec_issgi(ratespec)) * 4;
+ /*
+ * the payload duration calculation matches that
+ * of regular ofdm
+ */
+ /* 1000Ndbps = kbps * 4 */
+ kNdps = mcs_2_rate(mcs, rspec_is40mhz(ratespec),
+ rspec_issgi(ratespec)) * 4;
if (rspec_stc(ratespec) == 0)
nsyms =
return (u16) len;
}
-/*
- * calculate frame duration of a given rate and length, return
- * time in usec unit
- */
-uint
-brcms_c_calc_frame_time(struct brcms_c_info *wlc, u32 ratespec,
- u8 preamble_type, uint mac_len)
+static void
+brcms_c_mod_prb_rsp_rate_table(struct brcms_c_info *wlc, uint frame_len)
{
- uint nsyms, dur = 0, Ndps, kNdps;
- uint rate = rspec2rate(ratespec);
+ const struct brcms_c_rateset *rs_dflt;
+ struct brcms_c_rateset rs;
+ u8 rate;
+ u16 entry_ptr;
+ u8 plcp[D11_PHY_HDR_LEN];
+ u16 dur, sifs;
+ uint i;
- if (rate == 0) {
- wiphy_err(wlc->wiphy, "wl%d: WAR: using rate of 1 mbps\n",
- wlc->pub->unit);
- rate = BRCM_RATE_1M;
- }
+ sifs = get_sifs(wlc->band);
- BCMMSG(wlc->wiphy, "wl%d: rspec 0x%x, preamble_type %d, len%d\n",
- wlc->pub->unit, ratespec, preamble_type, mac_len);
+ rs_dflt = brcms_c_rateset_get_hwrs(wlc);
- if (is_mcs_rate(ratespec)) {
- uint mcs = ratespec & RSPEC_RATE_MASK;
- int tot_streams = mcs_2_txstreams(mcs) + rspec_stc(ratespec);
+ brcms_c_rateset_copy(rs_dflt, &rs);
+ brcms_c_rateset_mcs_upd(&rs, wlc->stf->txstreams);
- dur = PREN_PREAMBLE + (tot_streams * PREN_PREAMBLE_EXT);
- if (preamble_type == BRCMS_MM_PREAMBLE)
- dur += PREN_MM_EXT;
- /* 1000Ndbps = kbps * 4 */
- kNdps = mcs_2_rate(mcs, rspec_is40mhz(ratespec),
- rspec_issgi(ratespec)) * 4;
+ /*
+ * walk the phy rate table and update MAC core SHM
+ * basic rate table entries
+ */
+ for (i = 0; i < rs.count; i++) {
+ rate = rs.rates[i] & BRCMS_RATE_MASK;
- if (rspec_stc(ratespec) == 0)
- nsyms =
- CEIL((APHY_SERVICE_NBITS + 8 * mac_len +
- APHY_TAIL_NBITS) * 1000, kNdps);
- else
- /* STBC needs to have even number of symbols */
- nsyms =
- 2 *
- CEIL((APHY_SERVICE_NBITS + 8 * mac_len +
- APHY_TAIL_NBITS) * 1000, 2 * kNdps);
+ entry_ptr = brcms_b_rate_shm_offset(wlc->hw, rate);
+
+ /* Calculate the Probe Response PLCP for the given rate */
+ brcms_c_compute_plcp(wlc, rate, frame_len, plcp);
- dur += APHY_SYMBOL_TIME * nsyms;
- if (wlc->band->bandtype == BRCM_BAND_2G)
- dur += DOT11_OFDM_SIGNAL_EXTENSION;
- } else if (is_ofdm_rate(rate)) {
- dur = APHY_PREAMBLE_TIME;
- dur += APHY_SIGNAL_TIME;
- /* Ndbps = Mbps * 4 = rate(500Kbps) * 2 */
- Ndps = rate * 2;
- /* NSyms = CEILING((SERVICE + 8*NBytes + TAIL) / Ndbps) */
- nsyms =
- CEIL((APHY_SERVICE_NBITS + 8 * mac_len + APHY_TAIL_NBITS),
- Ndps);
- dur += APHY_SYMBOL_TIME * nsyms;
- if (wlc->band->bandtype == BRCM_BAND_2G)
- dur += DOT11_OFDM_SIGNAL_EXTENSION;
- } else {
/*
- * calc # bits * 2 so factor of 2 in rate (1/2 mbps)
- * will divide out
+ * Calculate the duration of the Probe Response
+ * frame plus SIFS for the MAC
*/
- mac_len = mac_len * 8 * 2;
- /* calc ceiling of bits/rate = microseconds of air time */
- dur = (mac_len + rate - 1) / rate;
- if (preamble_type & BRCMS_SHORT_PREAMBLE)
- dur += BPHY_PLCP_SHORT_TIME;
- else
- dur += BPHY_PLCP_TIME;
+ dur = (u16) brcms_c_calc_frame_time(wlc, rate,
+ BRCMS_LONG_PREAMBLE, frame_len);
+ dur += sifs;
+
+ /* Update the SHM Rate Table entry Probe Response values */
+ brcms_b_write_shm(wlc->hw, entry_ptr + M_RT_PRS_PLCP_POS,
+ (u16) (plcp[0] + (plcp[1] << 8)));
+ brcms_b_write_shm(wlc->hw, entry_ptr + M_RT_PRS_PLCP_POS + 2,
+ (u16) (plcp[2] + (plcp[3] << 8)));
+ brcms_b_write_shm(wlc->hw, entry_ptr + M_RT_PRS_DUR_POS, dur);
}
- return dur;
}
-/* derive wlc->band->basic_rate[] table from 'rateset' */
-void brcms_c_rate_lookup_init(struct brcms_c_info *wlc,
- struct brcms_c_rateset *rateset)
+/* Max buffering needed for beacon template/prb resp template is 142 bytes.
+ *
+ * PLCP header is 6 bytes.
+ * 802.11 A3 header is 24 bytes.
+ * Max beacon frame body template length is 112 bytes.
+ * Max probe resp frame body template length is 110 bytes.
+ *
+ * *len on input contains the max length of the packet available.
+ *
+ * The *len value is set to the number of bytes in buf used, and starts
+ * with the PLCP and included up to, but not including, the 4 byte FCS.
+ */
+static void
+brcms_c_bcn_prb_template(struct brcms_c_info *wlc, u16 type,
+ u32 bcn_rspec,
+ struct brcms_bss_cfg *cfg, u16 *buf, int *len)
{
- u8 rate;
- u8 mandatory;
- u8 cck_basic = 0;
- u8 ofdm_basic = 0;
- u8 *br = wlc->band->basic_rate;
- uint i;
-
- /* incoming rates are in 500kbps units as in 802.11 Supported Rates */
- memset(br, 0, BRCM_MAXRATE + 1);
+ static const u8 ether_bcast[ETH_ALEN] = {255, 255, 255, 255, 255, 255};
+ struct cck_phy_hdr *plcp;
+ struct ieee80211_mgmt *h;
+ int hdr_len, body_len;
- /* For each basic rate in the rates list, make an entry in the
- * best basic lookup.
- */
- for (i = 0; i < rateset->count; i++) {
- /* only make an entry for a basic rate */
- if (!(rateset->rates[i] & BRCMS_RATE_FLAG))
- continue;
+ hdr_len = D11_PHY_HDR_LEN + DOT11_MAC_HDR_LEN;
- /* mask off basic bit */
- rate = (rateset->rates[i] & BRCMS_RATE_MASK);
+ /* calc buffer size provided for frame body */
+ body_len = *len - hdr_len;
+ /* return actual size */
+ *len = hdr_len + body_len;
- if (rate > BRCM_MAXRATE) {
- wiphy_err(wlc->wiphy, "brcms_c_rate_lookup_init: "
- "invalid rate 0x%X in rate set\n",
- rateset->rates[i]);
- continue;
- }
+ /* format PHY and MAC headers */
+ memset((char *)buf, 0, hdr_len);
- br[rate] = rate;
- }
+ plcp = (struct cck_phy_hdr *) buf;
- /* The rate lookup table now has non-zero entries for each
- * basic rate, equal to the basic rate: br[basicN] = basicN
- *
- * To look up the best basic rate corresponding to any
- * particular rate, code can use the basic_rate table
- * like this
- *
- * basic_rate = wlc->band->basic_rate[tx_rate]
- *
- * Make sure there is a best basic rate entry for
- * every rate by walking up the table from low rates
- * to high, filling in holes in the lookup table
+ /*
+ * PLCP for Probe Response frames are filled in from
+ * core's rate table
*/
+ if (type == IEEE80211_STYPE_BEACON)
+ /* fill in PLCP */
+ brcms_c_compute_plcp(wlc, bcn_rspec,
+ (DOT11_MAC_HDR_LEN + body_len + FCS_LEN),
+ (u8 *) plcp);
- for (i = 0; i < wlc->band->hw_rateset.count; i++) {
- rate = wlc->band->hw_rateset.rates[i];
+ /* "Regular" and 16 MBSS but not for 4 MBSS */
+ /* Update the phytxctl for the beacon based on the rspec */
+ brcms_c_beacon_phytxctl_txant_upd(wlc, bcn_rspec);
- if (br[rate] != 0) {
- /* This rate is a basic rate.
- * Keep track of the best basic rate so far by
- * modulation type.
- */
- if (is_ofdm_rate(rate))
- ofdm_basic = rate;
- else
- cck_basic = rate;
+ h = (struct ieee80211_mgmt *)&plcp[1];
- continue;
- }
+ /* fill in 802.11 header */
+ h->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | type);
- /* This rate is not a basic rate so figure out the
- * best basic rate less than this rate and fill in
- * the hole in the table
- */
+ /* DUR is 0 for multicast bcn, or filled in by MAC for prb resp */
+ /* A1 filled in by MAC for prb resp, broadcast for bcn */
+ if (type == IEEE80211_STYPE_BEACON)
+ memcpy(&h->da, ðer_bcast, ETH_ALEN);
+ memcpy(&h->sa, &cfg->cur_etheraddr, ETH_ALEN);
+ memcpy(&h->bssid, &cfg->BSSID, ETH_ALEN);
- br[rate] = is_ofdm_rate(rate) ? ofdm_basic : cck_basic;
+ /* SEQ filled in by MAC */
+}
- if (br[rate] != 0)
- continue;
+int brcms_c_get_header_len(void)
+{
+ return TXOFF;
+}
- if (is_ofdm_rate(rate)) {
- /*
- * In 11g and 11a, the OFDM mandatory rates
- * are 6, 12, and 24 Mbps
- */
- if (rate >= BRCM_RATE_24M)
- mandatory = BRCM_RATE_24M;
- else if (rate >= BRCM_RATE_12M)
- mandatory = BRCM_RATE_12M;
- else
- mandatory = BRCM_RATE_6M;
- } else {
- /* In 11b, all CCK rates are mandatory 1 - 11 Mbps */
- mandatory = rate;
- }
+/*
+ * Update all beacons for the system.
+ */
+void brcms_c_update_beacon(struct brcms_c_info *wlc)
+{
+ struct brcms_bss_cfg *bsscfg = wlc->bsscfg;
- br[rate] = mandatory;
- }
+ if (bsscfg->up && !bsscfg->BSS)
+ /* Clear the soft intmask */
+ wlc->defmacintmask &= ~MI_BCNTPL;
}
-static void brcms_c_write_rate_shm(struct brcms_c_info *wlc, u8 rate,
- u8 basic_rate)
+/* Write ssid into shared memory */
+static void
+brcms_c_shm_ssid_upd(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg)
{
- u8 phy_rate, index;
- u8 basic_phy_rate, basic_index;
- u16 dir_table, basic_table;
- u16 basic_ptr;
+ u8 *ssidptr = cfg->SSID;
+ u16 base = M_SSID;
+ u8 ssidbuf[IEEE80211_MAX_SSID_LEN];
- /* Shared memory address for the table we are reading */
- dir_table = is_ofdm_rate(basic_rate) ? M_RT_DIRMAP_A : M_RT_DIRMAP_B;
+ /* padding the ssid with zero and copy it into shm */
+ memset(ssidbuf, 0, IEEE80211_MAX_SSID_LEN);
+ memcpy(ssidbuf, ssidptr, cfg->SSID_len);
- /* Shared memory address for the table we are writing */
- basic_table = is_ofdm_rate(rate) ? M_RT_BBRSMAP_A : M_RT_BBRSMAP_B;
+ brcms_c_copyto_shm(wlc, base, ssidbuf, IEEE80211_MAX_SSID_LEN);
+ brcms_b_write_shm(wlc->hw, M_SSIDLEN, (u16) cfg->SSID_len);
+}
+
+static void
+brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc,
+ struct brcms_bss_cfg *cfg,
+ bool suspend)
+{
+ u16 prb_resp[BCN_TMPL_LEN / 2];
+ int len = BCN_TMPL_LEN;
/*
- * for a given rate, the LS-nibble of the PLCP SIGNAL field is
- * the index into the rate table.
+ * write the probe response to hardware, or save in
+ * the config structure
*/
- phy_rate = rate_info[rate] & BRCMS_RATE_MASK;
- basic_phy_rate = rate_info[basic_rate] & BRCMS_RATE_MASK;
- index = phy_rate & 0xf;
- basic_index = basic_phy_rate & 0xf;
- /* Find the SHM pointer to the ACK rate entry by looking in the
- * Direct-map Table
- */
- basic_ptr = brcms_b_read_shm(wlc->hw, (dir_table + basic_index * 2));
+ /* create the probe response template */
+ brcms_c_bcn_prb_template(wlc, IEEE80211_STYPE_PROBE_RESP, 0,
+ cfg, prb_resp, &len);
- /* Update the SHM BSS-basic-rate-set mapping table with the pointer
- * to the correct basic rate for the given incoming rate
+ if (suspend)
+ brcms_c_suspend_mac_and_wait(wlc);
+
+ /* write the probe response into the template region */
+ brcms_b_write_template_ram(wlc->hw, T_PRS_TPL_BASE,
+ (len + 3) & ~3, prb_resp);
+
+ /* write the length of the probe response frame (+PLCP/-FCS) */
+ brcms_b_write_shm(wlc->hw, M_PRB_RESP_FRM_LEN, (u16) len);
+
+ /* write the SSID and SSID length */
+ brcms_c_shm_ssid_upd(wlc, cfg);
+
+ /*
+ * Write PLCP headers and durations for probe response frames
+ * at all rates. Use the actual frame length covered by the
+ * PLCP header for the call to brcms_c_mod_prb_rsp_rate_table()
+ * by subtracting the PLCP len and adding the FCS.
*/
- brcms_b_write_shm(wlc->hw, (basic_table + index * 2), basic_ptr);
+ len += (-D11_PHY_HDR_LEN + FCS_LEN);
+ brcms_c_mod_prb_rsp_rate_table(wlc, (u16) len);
+
+ if (suspend)
+ brcms_c_enable_mac(wlc);
}
-static const struct brcms_c_rateset *
-brcms_c_rateset_get_hwrs(struct brcms_c_info *wlc)
+void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend)
{
- const struct brcms_c_rateset *rs_dflt;
-
- if (BRCMS_PHY_11N_CAP(wlc->band)) {
- if (wlc->band->bandtype == BRCM_BAND_5G)
- rs_dflt = &ofdm_mimo_rates;
- else
- rs_dflt = &cck_ofdm_mimo_rates;
- } else if (wlc->band->gmode)
- rs_dflt = &cck_ofdm_rates;
- else
- rs_dflt = &cck_rates;
+ struct brcms_bss_cfg *bsscfg = wlc->bsscfg;
- return rs_dflt;
+ /* update AP or IBSS probe responses */
+ if (bsscfg->up && !bsscfg->BSS)
+ brcms_c_bss_update_probe_resp(wlc, bsscfg, suspend);
}
-void brcms_c_set_ratetable(struct brcms_c_info *wlc)
+/* prepares pdu for transmission. returns BCM error codes */
+int brcms_c_prep_pdu(struct brcms_c_info *wlc, struct sk_buff *pdu, uint *fifop)
{
- const struct brcms_c_rateset *rs_dflt;
- struct brcms_c_rateset rs;
- u8 rate, basic_rate;
- uint i;
+ uint fifo;
+ struct d11txh *txh;
+ struct ieee80211_hdr *h;
+ struct scb *scb;
- rs_dflt = brcms_c_rateset_get_hwrs(wlc);
+ txh = (struct d11txh *) (pdu->data);
+ h = (struct ieee80211_hdr *)((u8 *) (txh + 1) + D11_PHY_HDR_LEN);
- brcms_c_rateset_copy(rs_dflt, &rs);
- brcms_c_rateset_mcs_upd(&rs, wlc->stf->txstreams);
+ /* get the pkt queue info. This was put at brcms_c_sendctl or
+ * brcms_c_send for PDU */
+ fifo = le16_to_cpu(txh->TxFrameID) & TXFID_QUEUE_MASK;
- /* walk the phy rate table and update SHM basic rate lookup table */
- for (i = 0; i < rs.count; i++) {
- rate = rs.rates[i] & BRCMS_RATE_MASK;
+ scb = NULL;
- /* for a given rate brcms_basic_rate returns the rate at
- * which a response ACK/CTS should be sent.
- */
- basic_rate = brcms_basic_rate(wlc, rate);
- if (basic_rate == 0)
- /* This should only happen if we are using a
- * restricted rateset.
- */
- basic_rate = rs.rates[0] & BRCMS_RATE_MASK;
+ *fifop = fifo;
- brcms_c_write_rate_shm(wlc, rate, basic_rate);
+ /* return if insufficient dma resources */
+ if (*wlc->core->txavail[fifo] < MAX_DMA_SEGS) {
+ /* Mark precedences related to this FIFO, unsendable */
+ /* A fifo is full. Clear precedences related to that FIFO */
+ wlc->tx_prec_map &= ~(wlc->fifo2prec_map[fifo]);
+ return -EBUSY;
}
+ return 0;
}
-/*
- * Return true if the specified rate is supported by the specified band.
- * BRCM_BAND_AUTO indicates the current band.
- */
-bool brcms_c_valid_rate(struct brcms_c_info *wlc, u32 rspec, int band,
- bool verbose)
+int brcms_b_xmtfifo_sz_get(struct brcms_hardware *wlc_hw, uint fifo,
+ uint *blocks)
{
- struct brcms_c_rateset *hw_rateset;
- uint i;
+ if (fifo >= NFIFO)
+ return -EINVAL;
- if ((band == BRCM_BAND_AUTO) || (band == wlc->band->bandtype))
- hw_rateset = &wlc->band->hw_rateset;
- else if (wlc->pub->_nbands > 1)
- hw_rateset = &wlc->bandstate[OTHERBANDUNIT(wlc)]->hw_rateset;
- else
- /* other band specified and we are a single band device */
- return false;
+ *blocks = wlc_hw->xmtfifo_sz[fifo];
- /* check if this is a mimo rate */
- if (is_mcs_rate(rspec)) {
- if ((rspec & RSPEC_RATE_MASK) >= MCS_TABLE_SIZE)
- goto error;
+ return 0;
+}
- return isset(hw_rateset->mcs, (rspec & RSPEC_RATE_MASK));
- }
+void
+brcms_c_set_addrmatch(struct brcms_c_info *wlc, int match_reg_offset,
+ const u8 *addr)
+{
+ brcms_b_set_addrmatch(wlc->hw, match_reg_offset, addr);
+ if (match_reg_offset == RCM_BSSID_OFFSET)
+ memcpy(wlc->bsscfg->BSSID, addr, ETH_ALEN);
+}
- for (i = 0; i < hw_rateset->count; i++)
- if (hw_rateset->rates[i] == rspec2rate(rspec))
- return true;
- error:
- if (verbose)
- wiphy_err(wlc->wiphy, "wl%d: valid_rate: rate spec 0x%x "
- "not in hw_rateset\n", wlc->pub->unit, rspec);
+/*
+ * Flag 'scan in progress' to withhold dynamic phy calibration
+ */
+void brcms_c_scan_start(struct brcms_c_info *wlc)
+{
+ wlc_phy_hold_upd(wlc->band->pi, PHY_HOLD_FOR_SCAN, true);
+}
- return false;
+void brcms_c_scan_stop(struct brcms_c_info *wlc)
+{
+ wlc_phy_hold_upd(wlc->band->pi, PHY_HOLD_FOR_SCAN, false);
}
-void brcms_c_mod_prb_rsp_rate_table(struct brcms_c_info *wlc, uint frame_len)
+void brcms_c_associate_upd(struct brcms_c_info *wlc, bool state)
{
- const struct brcms_c_rateset *rs_dflt;
- struct brcms_c_rateset rs;
- u8 rate;
- u16 entry_ptr;
- u8 plcp[D11_PHY_HDR_LEN];
- u16 dur, sifs;
- uint i;
+ wlc->pub->associated = state;
+ wlc->bsscfg->associated = state;
+}
- sifs = get_sifs(wlc->band);
+/*
+ * When a remote STA/AP is removed by Mac80211, or when it can no longer accept
+ * AMPDU traffic, packets pending in hardware have to be invalidated so that
+ * when later on hardware releases them, they can be handled appropriately.
+ */
+void brcms_c_inval_dma_pkts(struct brcms_hardware *hw,
+ struct ieee80211_sta *sta,
+ void (*dma_callback_fn))
+{
+ struct dma_pub *dmah;
+ int i;
+ for (i = 0; i < NFIFO; i++) {
+ dmah = hw->di[i];
+ if (dmah != NULL)
+ dma_walk_packets(dmah, dma_callback_fn, sta);
+ }
+}
- rs_dflt = brcms_c_rateset_get_hwrs(wlc);
+int brcms_c_get_curband(struct brcms_c_info *wlc)
+{
+ return wlc->band->bandunit;
+}
- brcms_c_rateset_copy(rs_dflt, &rs);
- brcms_c_rateset_mcs_upd(&rs, wlc->stf->txstreams);
+void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc, bool drop)
+{
+ /* flush packet queue when requested */
+ if (drop)
+ brcmu_pktq_flush(&wlc->pkt_queue->q, false, NULL, NULL);
- /*
- * walk the phy rate table and update MAC core SHM
- * basic rate table entries
- */
- for (i = 0; i < rs.count; i++) {
- rate = rs.rates[i] & BRCMS_RATE_MASK;
+ /* wait for queue and DMA fifos to run dry */
+ while (!pktq_empty(&wlc->pkt_queue->q) || brcms_txpktpendtot(wlc) > 0)
+ brcms_msleep(wlc->wl, 1);
+}
- entry_ptr = brcms_b_rate_shm_offset(wlc->hw, rate);
+void brcms_c_set_beacon_listen_interval(struct brcms_c_info *wlc, u8 interval)
+{
+ wlc->bcn_li_bcn = interval;
+ if (wlc->pub->up)
+ brcms_c_bcn_li_upd(wlc);
+}
- /* Calculate the Probe Response PLCP for the given rate */
- brcms_c_compute_plcp(wlc, rate, frame_len, plcp);
+int brcms_c_set_tx_power(struct brcms_c_info *wlc, int txpwr)
+{
+ uint qdbm;
- /*
- * Calculate the duration of the Probe Response
- * frame plus SIFS for the MAC
- */
- dur = (u16) brcms_c_calc_frame_time(wlc, rate,
- BRCMS_LONG_PREAMBLE, frame_len);
- dur += sifs;
+ /* Remove override bit and clip to max qdbm value */
+ qdbm = min_t(uint, txpwr * BRCMS_TXPWR_DB_FACTOR, 0xff);
+ return wlc_phy_txpower_set(wlc->band->pi, qdbm, false);
+}
- /* Update the SHM Rate Table entry Probe Response values */
- brcms_b_write_shm(wlc->hw, entry_ptr + M_RT_PRS_PLCP_POS,
- (u16) (plcp[0] + (plcp[1] << 8)));
- brcms_b_write_shm(wlc->hw, entry_ptr + M_RT_PRS_PLCP_POS + 2,
- (u16) (plcp[2] + (plcp[3] << 8)));
- brcms_b_write_shm(wlc->hw, entry_ptr + M_RT_PRS_DUR_POS, dur);
- }
+int brcms_c_get_tx_power(struct brcms_c_info *wlc)
+{
+ uint qdbm;
+ bool override;
+
+ wlc_phy_txpower_get(wlc->band->pi, &qdbm, &override);
+
+ /* Return qdbm units */
+ return (int)(qdbm / BRCMS_TXPWR_DB_FACTOR);
}
-/* Max buffering needed for beacon template/prb resp template is 142 bytes.
- *
- * PLCP header is 6 bytes.
- * 802.11 A3 header is 24 bytes.
- * Max beacon frame body template length is 112 bytes.
- * Max probe resp frame body template length is 110 bytes.
- *
- * *len on input contains the max length of the packet available.
- *
- * The *len value is set to the number of bytes in buf used, and starts
- * with the PLCP and included up to, but not including, the 4 byte FCS.
- */
-static void
-brcms_c_bcn_prb_template(struct brcms_c_info *wlc, u16 type,
- u32 bcn_rspec,
- struct brcms_bss_cfg *cfg, u16 *buf, int *len)
+void brcms_c_set_radio_mpc(struct brcms_c_info *wlc, bool mpc)
{
- static const u8 ether_bcast[ETH_ALEN] = {255, 255, 255, 255, 255, 255};
- struct cck_phy_hdr *plcp;
- struct ieee80211_mgmt *h;
- int hdr_len, body_len;
+ wlc->mpc = mpc;
+ brcms_c_radio_mpc_upd(wlc);
+}
- hdr_len = D11_PHY_HDR_LEN + DOT11_MAC_HDR_LEN;
+/* Process received frames */
+/*
+ * Return true if more frames need to be processed. false otherwise.
+ * Param 'bound' indicates max. # frames to process before break out.
+ */
+static void brcms_c_recv(struct brcms_c_info *wlc, struct sk_buff *p)
+{
+ struct d11rxhdr *rxh;
+ struct ieee80211_hdr *h;
+ uint len;
+ bool is_amsdu;
- /* calc buffer size provided for frame body */
- body_len = *len - hdr_len;
- /* return actual size */
- *len = hdr_len + body_len;
+ BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
- /* format PHY and MAC headers */
- memset((char *)buf, 0, hdr_len);
+ /* frame starts with rxhdr */
+ rxh = (struct d11rxhdr *) (p->data);
- plcp = (struct cck_phy_hdr *) buf;
+ /* strip off rxhdr */
+ skb_pull(p, BRCMS_HWRXOFF);
- /*
- * PLCP for Probe Response frames are filled in from
- * core's rate table
- */
- if (type == IEEE80211_STYPE_BEACON)
- /* fill in PLCP */
- brcms_c_compute_plcp(wlc, bcn_rspec,
- (DOT11_MAC_HDR_LEN + body_len + FCS_LEN),
- (u8 *) plcp);
+ /* MAC inserts 2 pad bytes for a4 headers or QoS or A-MSDU subframes */
+ if (rxh->RxStatus1 & RXS_PBPRES) {
+ if (p->len < 2) {
+ wiphy_err(wlc->wiphy, "wl%d: recv: rcvd runt of "
+ "len %d\n", wlc->pub->unit, p->len);
+ goto toss;
+ }
+ skb_pull(p, 2);
+ }
- /* "Regular" and 16 MBSS but not for 4 MBSS */
- /* Update the phytxctl for the beacon based on the rspec */
- brcms_c_beacon_phytxctl_txant_upd(wlc, bcn_rspec);
+ h = (struct ieee80211_hdr *)(p->data + D11_PHY_HDR_LEN);
+ len = p->len;
- h = (struct ieee80211_mgmt *)&plcp[1];
+ if (rxh->RxStatus1 & RXS_FCSERR) {
+ if (wlc->pub->mac80211_state & MAC80211_PROMISC_BCNS) {
+ wiphy_err(wlc->wiphy, "FCSERR while scanning******* -"
+ " tossing\n");
+ goto toss;
+ } else {
+ wiphy_err(wlc->wiphy, "RCSERR!!!\n");
+ goto toss;
+ }
+ }
- /* fill in 802.11 header */
- h->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | type);
+ /* check received pkt has at least frame control field */
+ if (len < D11_PHY_HDR_LEN + sizeof(h->frame_control))
+ goto toss;
- /* DUR is 0 for multicast bcn, or filled in by MAC for prb resp */
- /* A1 filled in by MAC for prb resp, broadcast for bcn */
- if (type == IEEE80211_STYPE_BEACON)
- memcpy(&h->da, ðer_bcast, ETH_ALEN);
- memcpy(&h->sa, &cfg->cur_etheraddr, ETH_ALEN);
- memcpy(&h->bssid, &cfg->BSSID, ETH_ALEN);
+ /* not supporting A-MSDU */
+ is_amsdu = rxh->RxStatus2 & RXS_AMSDU_MASK;
+ if (is_amsdu)
+ goto toss;
- /* SEQ filled in by MAC */
-}
+ brcms_c_recvctl(wlc, rxh, p);
+ return;
-int brcms_c_get_header_len(void)
-{
- return TXOFF;
+ toss:
+ brcmu_pkt_buf_free_skb(p);
}
+/* Process received frames */
/*
- * Update all beacons for the system.
+ * Return true if more frames need to be processed. false otherwise.
+ * Param 'bound' indicates max. # frames to process before break out.
*/
-void brcms_c_update_beacon(struct brcms_c_info *wlc)
+static bool
+brcms_b_recv(struct brcms_hardware *wlc_hw, uint fifo, bool bound)
{
- struct brcms_bss_cfg *bsscfg = wlc->bsscfg;
+ struct sk_buff *p;
+ struct sk_buff *head = NULL;
+ struct sk_buff *tail = NULL;
+ uint n = 0;
+ uint bound_limit = bound ? RXBND : -1;
- if (bsscfg->up && !bsscfg->BSS)
- /* Clear the soft intmask */
- wlc->defmacintmask &= ~MI_BCNTPL;
-}
+ BCMMSG(wlc_hw->wlc->wiphy, "wl%d\n", wlc_hw->unit);
+ /* gather received frames */
+ while ((p = dma_rx(wlc_hw->di[fifo]))) {
-/* Write ssid into shared memory */
-void brcms_c_shm_ssid_upd(struct brcms_c_info *wlc, struct brcms_bss_cfg *cfg)
-{
- u8 *ssidptr = cfg->SSID;
- u16 base = M_SSID;
- u8 ssidbuf[IEEE80211_MAX_SSID_LEN];
+ if (!tail)
+ head = tail = p;
+ else {
+ tail->prev = p;
+ tail = p;
+ }
- /* padding the ssid with zero and copy it into shm */
- memset(ssidbuf, 0, IEEE80211_MAX_SSID_LEN);
- memcpy(ssidbuf, ssidptr, cfg->SSID_len);
+ /* !give others some time to run! */
+ if (++n >= bound_limit)
+ break;
+ }
- brcms_c_copyto_shm(wlc, base, ssidbuf, IEEE80211_MAX_SSID_LEN);
- brcms_b_write_shm(wlc->hw, M_SSIDLEN, (u16) cfg->SSID_len);
+ /* post more rbufs */
+ dma_rxfill(wlc_hw->di[fifo]);
+
+ /* process each frame */
+ while ((p = head) != NULL) {
+ struct d11rxhdr_le *rxh_le;
+ struct d11rxhdr *rxh;
+ head = head->prev;
+ p->prev = NULL;
+
+ rxh_le = (struct d11rxhdr_le *)p->data;
+ rxh = (struct d11rxhdr *)p->data;
+
+ /* fixup rx header endianness */
+ rxh->RxFrameSize = le16_to_cpu(rxh_le->RxFrameSize);
+ rxh->PhyRxStatus_0 = le16_to_cpu(rxh_le->PhyRxStatus_0);
+ rxh->PhyRxStatus_1 = le16_to_cpu(rxh_le->PhyRxStatus_1);
+ rxh->PhyRxStatus_2 = le16_to_cpu(rxh_le->PhyRxStatus_2);
+ rxh->PhyRxStatus_3 = le16_to_cpu(rxh_le->PhyRxStatus_3);
+ rxh->PhyRxStatus_4 = le16_to_cpu(rxh_le->PhyRxStatus_4);
+ rxh->PhyRxStatus_5 = le16_to_cpu(rxh_le->PhyRxStatus_5);
+ rxh->RxStatus1 = le16_to_cpu(rxh_le->RxStatus1);
+ rxh->RxStatus2 = le16_to_cpu(rxh_le->RxStatus2);
+ rxh->RxTSFTime = le16_to_cpu(rxh_le->RxTSFTime);
+ rxh->RxChan = le16_to_cpu(rxh_le->RxChan);
+
+ brcms_c_recv(wlc_hw->wlc, p);
+ }
+
+ return n >= bound_limit;
}
-void brcms_c_update_probe_resp(struct brcms_c_info *wlc, bool suspend)
+/* second-level interrupt processing
+ * Return true if another dpc needs to be re-scheduled. false otherwise.
+ * Param 'bounded' indicates if applicable loops should be bounded.
+ */
+bool brcms_c_dpc(struct brcms_c_info *wlc, bool bounded)
{
- struct brcms_bss_cfg *bsscfg = wlc->bsscfg;
+ u32 macintstatus;
+ struct brcms_hardware *wlc_hw = wlc->hw;
+ struct d11regs __iomem *regs = wlc_hw->regs;
+ struct wiphy *wiphy = wlc->wiphy;
- /* update AP or IBSS probe responses */
- if (bsscfg->up && !bsscfg->BSS)
- brcms_c_bss_update_probe_resp(wlc, bsscfg, suspend);
+ if (brcms_deviceremoved(wlc)) {
+ wiphy_err(wiphy, "wl%d: %s: dead chip\n", wlc_hw->unit,
+ __func__);
+ brcms_down(wlc->wl);
+ return false;
+ }
+
+ /* grab and clear the saved software intstatus bits */
+ macintstatus = wlc->macintstatus;
+ wlc->macintstatus = 0;
+
+ BCMMSG(wlc->wiphy, "wl%d: macintstatus 0x%x\n",
+ wlc_hw->unit, macintstatus);
+
+ WARN_ON(macintstatus & MI_PRQ); /* PRQ Interrupt in non-MBSS */
+
+ /* tx status */
+ if (macintstatus & MI_TFS) {
+ bool fatal;
+ if (brcms_b_txstatus(wlc->hw, bounded, &fatal))
+ wlc->macintstatus |= MI_TFS;
+ if (fatal) {
+ wiphy_err(wiphy, "MI_TFS: fatal\n");
+ goto fatal;
+ }
+ }
+
+ if (macintstatus & (MI_TBTT | MI_DTIM_TBTT))
+ brcms_c_tbtt(wlc);
+
+ /* ATIM window end */
+ if (macintstatus & MI_ATIMWINEND) {
+ BCMMSG(wlc->wiphy, "end of ATIM window\n");
+ OR_REG(®s->maccommand, wlc->qvalid);
+ wlc->qvalid = 0;
+ }
+
+ /*
+ * received data or control frame, MI_DMAINT is
+ * indication of RX_FIFO interrupt
+ */
+ if (macintstatus & MI_DMAINT)
+ if (brcms_b_recv(wlc_hw, RX_FIFO, bounded))
+ wlc->macintstatus |= MI_DMAINT;
+
+ /* noise sample collected */
+ if (macintstatus & MI_BG_NOISE)
+ wlc_phy_noise_sample_intr(wlc_hw->band->pi);
+
+ if (macintstatus & MI_GP0) {
+ wiphy_err(wiphy, "wl%d: PSM microcode watchdog fired at %d "
+ "(seconds). Resetting.\n", wlc_hw->unit, wlc_hw->now);
+
+ printk_once("%s : PSM Watchdog, chipid 0x%x, chiprev 0x%x\n",
+ __func__, wlc_hw->sih->chip,
+ wlc_hw->sih->chiprev);
+ /* big hammer */
+ brcms_init(wlc->wl);
+ }
+
+ /* gptimer timeout */
+ if (macintstatus & MI_TO)
+ W_REG(®s->gptimer, 0);
+
+ if (macintstatus & MI_RFDISABLE) {
+ BCMMSG(wlc->wiphy, "wl%d: BMAC Detected a change on the"
+ " RF Disable Input\n", wlc_hw->unit);
+ brcms_rfkill_set_hw_state(wlc->wl);
+ }
+
+ /* send any enq'd tx packets. Just makes sure to jump start tx */
+ if (!pktq_empty(&wlc->pkt_queue->q))
+ brcms_c_send_q(wlc);
+
+ /* it isn't done and needs to be resched if macintstatus is non-zero */
+ return wlc->macintstatus != 0;
+
+ fatal:
+ brcms_init(wlc->wl);
+ return wlc->macintstatus != 0;
}
-void
-brcms_c_bss_update_probe_resp(struct brcms_c_info *wlc,
- struct brcms_bss_cfg *cfg,
- bool suspend)
+void brcms_c_init(struct brcms_c_info *wlc)
{
- u16 prb_resp[BCN_TMPL_LEN / 2];
- int len = BCN_TMPL_LEN;
+ struct d11regs __iomem *regs;
+ u16 chanspec;
+ bool mute = false;
+
+ BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
+
+ regs = wlc->regs;
/*
- * write the probe response to hardware, or save in
- * the config structure
+ * This will happen if a big-hammer was executed. In
+ * that case, we want to go back to the channel that
+ * we were on and not new channel
*/
+ if (wlc->pub->associated)
+ chanspec = wlc->home_chanspec;
+ else
+ chanspec = brcms_c_init_chanspec(wlc);
- /* create the probe response template */
- brcms_c_bcn_prb_template(wlc, IEEE80211_STYPE_PROBE_RESP, 0,
- cfg, prb_resp, &len);
+ brcms_b_init(wlc->hw, chanspec, mute);
- if (suspend)
- brcms_c_suspend_mac_and_wait(wlc);
+ /* update beacon listen interval */
+ brcms_c_bcn_li_upd(wlc);
- /* write the probe response into the template region */
- brcms_b_write_template_ram(wlc->hw, T_PRS_TPL_BASE,
- (len + 3) & ~3, prb_resp);
+ /* write ethernet address to core */
+ brcms_c_set_mac(wlc->bsscfg);
+ brcms_c_set_bssid(wlc->bsscfg);
- /* write the length of the probe response frame (+PLCP/-FCS) */
- brcms_b_write_shm(wlc->hw, M_PRB_RESP_FRM_LEN, (u16) len);
+ /* Update tsf_cfprep if associated and up */
+ if (wlc->pub->associated && wlc->bsscfg->up) {
+ u32 bi;
- /* write the SSID and SSID length */
- brcms_c_shm_ssid_upd(wlc, cfg);
+ /* get beacon period and convert to uS */
+ bi = wlc->bsscfg->current_bss->beacon_period << 10;
+ /*
+ * update since init path would reset
+ * to default value
+ */
+ W_REG(®s->tsf_cfprep,
+ (bi << CFPREP_CBI_SHIFT));
+
+ /* Update maccontrol PM related bits */
+ brcms_c_set_ps_ctrl(wlc);
+ }
+
+ brcms_c_bandinit_ordered(wlc, chanspec);
+
+ /* init probe response timeout */
+ brcms_b_write_shm(wlc->hw, M_PRS_MAXTIME, wlc->prb_resp_timeout);
+
+ /* init max burst txop (framebursting) */
+ brcms_b_write_shm(wlc->hw, M_MBURST_TXOP,
+ (wlc->
+ _rifs ? (EDCF_AC_VO_TXOP_AP << 5) : MAXFRAMEBURST_TXOP));
+
+ /* initialize maximum allowed duty cycle */
+ brcms_c_duty_cycle_set(wlc, wlc->tx_duty_cycle_ofdm, true, true);
+ brcms_c_duty_cycle_set(wlc, wlc->tx_duty_cycle_cck, false, true);
/*
- * Write PLCP headers and durations for probe response frames
- * at all rates. Use the actual frame length covered by the
- * PLCP header for the call to brcms_c_mod_prb_rsp_rate_table()
- * by subtracting the PLCP len and adding the FCS.
+ * Update some shared memory locations related to
+ * max AMPDU size allowed to received
*/
- len += (-D11_PHY_HDR_LEN + FCS_LEN);
- brcms_c_mod_prb_rsp_rate_table(wlc, (u16) len);
+ brcms_c_ampdu_shm_upd(wlc->ampdu);
- if (suspend)
- brcms_c_enable_mac(wlc);
-}
+ /* band-specific inits */
+ brcms_c_bsinit(wlc);
-/* prepares pdu for transmission. returns BCM error codes */
-int brcms_c_prep_pdu(struct brcms_c_info *wlc, struct sk_buff *pdu, uint *fifop)
-{
- uint fifo;
- struct d11txh *txh;
- struct ieee80211_hdr *h;
- struct scb *scb;
+ /* Enable EDCF mode (while the MAC is suspended) */
+ OR_REG(®s->ifs_ctl, IFS_USEEDCF);
+ brcms_c_edcf_setparams(wlc, false);
- txh = (struct d11txh *) (pdu->data);
- h = (struct ieee80211_hdr *)((u8 *) (txh + 1) + D11_PHY_HDR_LEN);
+ /* Init precedence maps for empty FIFOs */
+ brcms_c_tx_prec_map_init(wlc);
- /* get the pkt queue info. This was put at brcms_c_sendctl or
- * brcms_c_send for PDU */
- fifo = le16_to_cpu(txh->TxFrameID) & TXFID_QUEUE_MASK;
+ /* read the ucode version if we have not yet done so */
+ if (wlc->ucode_rev == 0) {
+ wlc->ucode_rev =
+ brcms_b_read_shm(wlc->hw, M_BOM_REV_MAJOR) << NBITS(u16);
+ wlc->ucode_rev |= brcms_b_read_shm(wlc->hw, M_BOM_REV_MINOR);
+ }
- scb = NULL;
+ /* ..now really unleash hell (allow the MAC out of suspend) */
+ brcms_c_enable_mac(wlc);
- *fifop = fifo;
+ /* clear tx flow control */
+ brcms_c_txflowcontrol_reset(wlc);
- /* return if insufficient dma resources */
- if (*wlc->core->txavail[fifo] < MAX_DMA_SEGS) {
- /* Mark precedences related to this FIFO, unsendable */
- /* A fifo is full. Clear precedences related to that FIFO */
- wlc->tx_prec_map &= ~(wlc->fifo2prec_map[fifo]);
- return -EBUSY;
- }
- return 0;
-}
+ /* enable the RF Disable Delay timer */
+ W_REG(&wlc->regs->rfdisabledly, RFDISABLE_DEFAULT);
-void brcms_default_rateset(struct brcms_c_info *wlc, struct brcms_c_rateset *rs)
-{
- brcms_c_rateset_default(rs, NULL, wlc->band->phytype,
- wlc->band->bandtype, false, BRCMS_RATE_MASK_FULL,
- (bool) (wlc->pub->_n_enab & SUPPORT_11N),
- brcms_chspec_bw(wlc->default_bss->chanspec),
- wlc->stf->txstreams);
-}
+ /* initialize mpc delay */
+ wlc->mpc_delay_off = wlc->mpc_dlycnt = BRCMS_MPC_MIN_DELAYCNT;
-/* Copy a buffer to shared memory.
- * SHM 'offset' needs to be an even address and
- * Buffer length 'len' must be an even number of bytes
- */
-void brcms_c_copyto_shm(struct brcms_c_info *wlc, uint offset, const void *buf,
- int len)
-{
- brcms_b_copyto_objmem(wlc->hw, offset, buf, len, OBJADDR_SHM_SEL);
+ /*
+ * Initialize WME parameters; if they haven't been set by some other
+ * mechanism (IOVar, etc) then read them from the hardware.
+ */
+ if (GFIELD(wlc->wme_retries[0], EDCF_SHORT) == 0) {
+ /* Uninitialized; read from HW */
+ int ac;
+
+ for (ac = 0; ac < AC_COUNT; ac++)
+ wlc->wme_retries[ac] =
+ brcms_b_read_shm(wlc->hw, M_AC_TXLMT_ADDR(ac));
+ }
}
-int brcms_b_xmtfifo_sz_get(struct brcms_hardware *wlc_hw, uint fifo,
- uint *blocks)
+/*
+ * The common driver entry routine. Error codes should be unique
+ */
+struct brcms_c_info *
+brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
+ bool piomode, void __iomem *regsva, struct pci_dev *btparam,
+ uint *perr)
{
- if (fifo >= NFIFO)
- return -EINVAL;
+ struct brcms_c_info *wlc;
+ uint err = 0;
+ uint i, j;
+ struct brcms_pub *pub;
- *blocks = wlc_hw->xmtfifo_sz[fifo];
+ /* allocate struct brcms_c_info state and its substructures */
+ wlc = (struct brcms_c_info *) brcms_c_attach_malloc(unit, &err, device);
+ if (wlc == NULL)
+ goto fail;
+ wlc->wiphy = wl->wiphy;
+ pub = wlc->pub;
- return 0;
-}
+#if defined(BCMDBG)
+ wlc_info_dbg = wlc;
+#endif
-void
-brcms_c_set_addrmatch(struct brcms_c_info *wlc, int match_reg_offset,
- const u8 *addr)
-{
- brcms_b_set_addrmatch(wlc->hw, match_reg_offset, addr);
- if (match_reg_offset == RCM_BSSID_OFFSET)
- memcpy(wlc->bsscfg->BSSID, addr, ETH_ALEN);
-}
+ wlc->band = wlc->bandstate[0];
+ wlc->core = wlc->corestate;
+ wlc->wl = wl;
+ pub->unit = unit;
+ pub->_piomode = piomode;
+ wlc->bandinit_pending = false;
-/* check for the particular priority flow control bit being set */
-bool
-brcms_c_txflowcontrol_prio_isset(struct brcms_c_info *wlc,
- struct brcms_txq_info *q,
- int prio)
-{
- uint prio_mask;
+ /* populate struct brcms_c_info with default values */
+ brcms_c_info_init(wlc, unit);
- if (prio == ALLPRIO)
- prio_mask = TXQ_STOP_FOR_PRIOFC_MASK;
- else
- prio_mask = NBITVAL(prio);
+ /* update sta/ap related parameters */
+ brcms_c_ap_upd(wlc);
- return (q->stopped & prio_mask) == prio_mask;
-}
+ /*
+ * low level attach steps(all hw accesses go
+ * inside, no more in rest of the attach)
+ */
+ err = brcms_b_attach(wlc, vendor, device, unit, piomode, regsva,
+ btparam);
+ if (err)
+ goto fail;
-/* propagate the flow control to all interfaces using the given tx queue */
-void brcms_c_txflowcontrol(struct brcms_c_info *wlc,
- struct brcms_txq_info *qi,
- bool on, int prio)
-{
- uint prio_bits;
- uint cur_bits;
+ brcms_c_protection_upd(wlc, BRCMS_PROT_N_PAM_OVR, OFF);
- BCMMSG(wlc->wiphy, "flow control kicks in\n");
+ pub->phy_11ncapable = BRCMS_PHY_11N_CAP(wlc->band);
- if (prio == ALLPRIO)
- prio_bits = TXQ_STOP_FOR_PRIOFC_MASK;
- else
- prio_bits = NBITVAL(prio);
+ /* disable allowed duty cycle */
+ wlc->tx_duty_cycle_ofdm = 0;
+ wlc->tx_duty_cycle_cck = 0;
- cur_bits = qi->stopped & prio_bits;
+ brcms_c_stf_phy_chain_calc(wlc);
- /* Check for the case of no change and return early
- * Otherwise update the bit and continue
- */
- if (on) {
- if (cur_bits == prio_bits)
- return;
+ /* txchain 1: txant 0, txchain 2: txant 1 */
+ if (BRCMS_ISNPHY(wlc->band) && (wlc->stf->txstreams == 1))
+ wlc->stf->txant = wlc->stf->hw_txchain - 1;
- mboolset(qi->stopped, prio_bits);
- } else {
- if (cur_bits == 0)
- return;
+ /* push to BMAC driver */
+ wlc_phy_stf_chain_init(wlc->band->pi, wlc->stf->hw_txchain,
+ wlc->stf->hw_rxchain);
- mboolclr(qi->stopped, prio_bits);
- }
+ /* pull up some info resulting from the low attach */
+ for (i = 0; i < NFIFO; i++)
+ wlc->core->txavail[i] = wlc->hw->txavail[i];
- /* If there is a flow control override we will not change the external
- * flow control state.
- */
- if (qi->stopped & ~TXQ_STOP_FOR_PRIOFC_MASK)
- return;
+ memcpy(&wlc->perm_etheraddr, &wlc->hw->etheraddr, ETH_ALEN);
+ memcpy(&pub->cur_etheraddr, &wlc->hw->etheraddr, ETH_ALEN);
- brcms_c_txflowcontrol_signal(wlc, qi, on, prio);
-}
+ for (j = 0; j < wlc->pub->_nbands; j++) {
+ wlc->band = wlc->bandstate[j];
-void
-brcms_c_txflowcontrol_override(struct brcms_c_info *wlc,
- struct brcms_txq_info *qi,
- bool on, uint override)
-{
- uint prev_override;
+ if (!brcms_c_attach_stf_ant_init(wlc)) {
+ err = 24;
+ goto fail;
+ }
- prev_override = (qi->stopped & ~TXQ_STOP_FOR_PRIOFC_MASK);
+ /* default contention windows size limits */
+ wlc->band->CWmin = APHY_CWMIN;
+ wlc->band->CWmax = PHY_CWMAX;
- /* Update the flow control bits and do an early return if there is
- * no change in the external flow control state.
- */
- if (on) {
- mboolset(qi->stopped, override);
- /* if there was a previous override bit on, then setting this
- * makes no difference.
- */
- if (prev_override)
- return;
+ /* init gmode value */
+ if (wlc->band->bandtype == BRCM_BAND_2G) {
+ wlc->band->gmode = GMODE_AUTO;
+ brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER,
+ wlc->band->gmode);
+ }
- brcms_c_txflowcontrol_signal(wlc, qi, ON, ALLPRIO);
- } else {
- mboolclr(qi->stopped, override);
- /* clearing an override bit will only make a difference for
- * flow control if it was the only bit set. For any other
- * override setting, just return
- */
- if (prev_override != override)
- return;
+ /* init _n_enab supported mode */
+ if (BRCMS_PHY_11N_CAP(wlc->band)) {
+ pub->_n_enab = SUPPORT_11N;
+ brcms_c_protection_upd(wlc, BRCMS_PROT_N_USER,
+ ((pub->_n_enab ==
+ SUPPORT_11N) ? WL_11N_2x2 :
+ WL_11N_3x3));
+ }
- if (qi->stopped == 0) {
- brcms_c_txflowcontrol_signal(wlc, qi, OFF, ALLPRIO);
- } else {
- int prio;
+ /* init per-band default rateset, depend on band->gmode */
+ brcms_default_rateset(wlc, &wlc->band->defrateset);
- for (prio = MAXPRIO; prio >= 0; prio--) {
- if (!mboolisset(qi->stopped, NBITVAL(prio)))
- brcms_c_txflowcontrol_signal(
- wlc, qi, OFF, prio);
- }
- }
+ /* fill in hw_rateset */
+ brcms_c_rateset_filter(&wlc->band->defrateset,
+ &wlc->band->hw_rateset, false,
+ BRCMS_RATES_CCK_OFDM, BRCMS_RATE_MASK,
+ (bool) (wlc->pub->_n_enab & SUPPORT_11N));
}
-}
-/*
- * Flag 'scan in progress' to withhold dynamic phy calibration
- */
-void brcms_c_scan_start(struct brcms_c_info *wlc)
-{
- wlc_phy_hold_upd(wlc->band->pi, PHY_HOLD_FOR_SCAN, true);
-}
+ /*
+ * update antenna config due to
+ * wlc->stf->txant/txchain/ant_rx_ovr change
+ */
+ brcms_c_stf_phy_txant_upd(wlc);
-void brcms_c_scan_stop(struct brcms_c_info *wlc)
-{
- wlc_phy_hold_upd(wlc->band->pi, PHY_HOLD_FOR_SCAN, false);
-}
+ /* attach each modules */
+ err = brcms_c_attach_module(wlc);
+ if (err != 0)
+ goto fail;
-void brcms_c_associate_upd(struct brcms_c_info *wlc, bool state)
-{
- wlc->pub->associated = state;
- wlc->bsscfg->associated = state;
-}
+ if (!brcms_c_timers_init(wlc, unit)) {
+ wiphy_err(wl->wiphy, "wl%d: %s: init_timer failed\n", unit,
+ __func__);
+ err = 32;
+ goto fail;
+ }
-/*
- * When a remote STA/AP is removed by Mac80211, or when it can no longer accept
- * AMPDU traffic, packets pending in hardware have to be invalidated so that
- * when later on hardware releases them, they can be handled appropriately.
- */
-void brcms_c_inval_dma_pkts(struct brcms_hardware *hw,
- struct ieee80211_sta *sta,
- void (*dma_callback_fn))
-{
- struct dma_pub *dmah;
- int i;
- for (i = 0; i < NFIFO; i++) {
- dmah = hw->di[i];
- if (dmah != NULL)
- dma_walk_packets(dmah, dma_callback_fn, sta);
+ /* depend on rateset, gmode */
+ wlc->cmi = brcms_c_channel_mgr_attach(wlc);
+ if (!wlc->cmi) {
+ wiphy_err(wl->wiphy, "wl%d: %s: channel_mgr_attach failed"
+ "\n", unit, __func__);
+ err = 33;
+ goto fail;
}
-}
-int brcms_c_get_curband(struct brcms_c_info *wlc)
-{
- return wlc->band->bandunit;
-}
+ /* init default when all parameters are ready, i.e. ->rateset */
+ brcms_c_bss_default_init(wlc);
-void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc, bool drop)
-{
- /* flush packet queue when requested */
- if (drop)
- brcmu_pktq_flush(&wlc->pkt_queue->q, false, NULL, NULL);
+ /*
+ * Complete the wlc default state initializations..
+ */
- /* wait for queue and DMA fifos to run dry */
- while (!pktq_empty(&wlc->pkt_queue->q) || brcms_txpktpendtot(wlc) > 0)
- brcms_msleep(wlc->wl, 1);
-}
+ /* allocate our initial queue */
+ wlc->pkt_queue = brcms_c_txq_alloc(wlc);
+ if (wlc->pkt_queue == NULL) {
+ wiphy_err(wl->wiphy, "wl%d: %s: failed to malloc tx queue\n",
+ unit, __func__);
+ err = 100;
+ goto fail;
+ }
-void brcms_c_set_beacon_listen_interval(struct brcms_c_info *wlc, u8 interval)
-{
- wlc->bcn_li_bcn = interval;
- if (wlc->pub->up)
- brcms_c_bcn_li_upd(wlc);
-}
+ wlc->bsscfg->wlc = wlc;
-int brcms_c_set_tx_power(struct brcms_c_info *wlc, int txpwr)
-{
- uint qdbm;
+ wlc->mimoft = FT_HT;
+ wlc->mimo_40txbw = AUTO;
+ wlc->ofdm_40txbw = AUTO;
+ wlc->cck_40txbw = AUTO;
+ brcms_c_update_mimo_band_bwcap(wlc, BRCMS_N_BW_20IN2G_40IN5G);
- /* Remove override bit and clip to max qdbm value */
- qdbm = min_t(uint, txpwr * BRCMS_TXPWR_DB_FACTOR, 0xff);
- return wlc_phy_txpower_set(wlc->band->pi, qdbm, false);
-}
+ /* Set default values of SGI */
+ if (BRCMS_SGI_CAP_PHY(wlc)) {
+ brcms_c_ht_update_sgi_rx(wlc, (BRCMS_N_SGI_20 |
+ BRCMS_N_SGI_40));
+ } else if (BRCMS_ISSSLPNPHY(wlc->band)) {
+ brcms_c_ht_update_sgi_rx(wlc, (BRCMS_N_SGI_20 |
+ BRCMS_N_SGI_40));
+ } else {
+ brcms_c_ht_update_sgi_rx(wlc, 0);
+ }
-int brcms_c_get_tx_power(struct brcms_c_info *wlc)
-{
- uint qdbm;
- bool override;
+ /* initialize radio_mpc_disable according to wlc->mpc */
+ brcms_c_radio_mpc_upd(wlc);
+ brcms_b_antsel_set(wlc->hw, wlc->asi->antsel_avail);
- wlc_phy_txpower_get(wlc->band->pi, &qdbm, &override);
+ if (perr)
+ *perr = 0;
- /* Return qdbm units */
- return (int)(qdbm / BRCMS_TXPWR_DB_FACTOR);
-}
+ return wlc;
-void brcms_c_set_radio_mpc(struct brcms_c_info *wlc, bool mpc)
-{
- wlc->mpc = mpc;
- brcms_c_radio_mpc_upd(wlc);
+ fail:
+ wiphy_err(wl->wiphy, "wl%d: %s: failed with err %d\n",
+ unit, __func__, err);
+ if (wlc)
+ brcms_c_detach(wlc);
+
+ if (perr)
+ *perr = err;
+ return NULL;
}
projects / profile / common / kernel-common.git / commitdiff