ARM: dts: add imx7d soc dtsi file
authorFrank Li <Frank.Li@freescale.com>
Mon, 18 May 2015 18:45:04 +0000 (02:45 +0800)
committerShawn Guo <shawn.guo@linaro.org>
Wed, 3 Jun 2015 07:04:32 +0000 (15:04 +0800)
imx7d intergrates the unique display controller for EPD panel, pixel engines
and graphics engines to make it a ideal solution for EPD based devices such
as eReader, Signage, as well as any application rely on the bistable charactersic
of the EPD panel.

imx7d include two ARM Cortex A7 Core and one Cortex-M4 core.
Included Main Peripheral
 - DDR3\LP-DDR2
 - GPMI\BCH\APBH DMA(NAND flash support)
 - QSPI
 - WEIM Nor
 - LCDIF\MIPI DSI
 - CSI\MIPI CSI
 - EPDC
 - PCIe RC\EP
 - USB OTG\Host
 - CAN x2
 - I2C x4
 - SIMv2 x2
 - ENET -x2
 - uSDHC x3
 - eCSPI x1
 - PWM x4
 - OCOTP (fuse)
 - GPT x4
 - WDOG x4
 - Flex Timer x2

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
arch/arm/boot/dts/imx7d.dtsi [new file with mode: 0644]

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
new file mode 100644 (file)
index 0000000..c42cf8d
--- /dev/null
@@ -0,0 +1,486 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+       aliases {
+               gpio0 = &gpio1;
+               gpio1 = &gpio2;
+               gpio2 = &gpio3;
+               gpio3 = &gpio4;
+               gpio4 = &gpio5;
+               gpio5 = &gpio6;
+               gpio6 = &gpio7;
+               i2c0 = &i2c1;
+               i2c1 = &i2c2;
+               i2c2 = &i2c3;
+               i2c3 = &i2c4;
+               mmc0 = &usdhc1;
+               mmc1 = &usdhc2;
+               mmc2 = &usdhc3;
+               serial0 = &uart1;
+               serial1 = &uart2;
+               serial2 = &uart3;
+               serial3 = &uart4;
+               serial4 = &uart5;
+               serial5 = &uart6;
+               serial6 = &uart7;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu0: cpu@0 {
+                       compatible = "arm,cortex-a7";
+                       device_type = "cpu";
+                       reg = <0>;
+                       operating-points = <
+                               /* KHz  uV */
+                               996000  1075000
+                               792000  975000
+                       >;
+                       clock-latency = <61036>; /* two CLK32 periods */
+                       clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
+                                <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+                       clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
+               };
+
+               cpu1: cpu@1 {
+                       compatible = "arm,cortex-a7";
+                       device_type = "cpu";
+                       reg = <1>;
+               };
+       };
+
+       intc: interrupt-controller@31001000 {
+               compatible = "arm,cortex-a7-gic";
+               #interrupt-cells = <3>;
+               interrupt-controller;
+               reg = <0x31001000 0x1000>,
+                     <0x31002000 0x1000>,
+                     <0x31004000 0x2000>,
+                     <0x31006000 0x2000>;
+       };
+
+       ckil: clock-cki {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               clock-output-names = "ckil";
+       };
+
+       osc: clock-osc {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <24000000>;
+               clock-output-names = "osc";
+       };
+
+       soc {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "simple-bus";
+               interrupt-parent = <&intc>;
+               ranges;
+
+               aips1: aips-bus@30000000 {
+                       compatible = "fsl,aips-bus", "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       reg = <0x30000000 0x400000>;
+                       ranges;
+
+                       gpio1: gpio@30200000 {
+                               compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+                               reg = <0x30200000 0x10000>;
+                               interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+                                            <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                       };
+
+                       gpio2: gpio@30210000 {
+                               compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+                               reg = <0x30210000 0x10000>;
+                               interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                       };
+
+                       gpio3: gpio@30220000 {
+                               compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+                               reg = <0x30220000 0x10000>;
+                               interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                       };
+
+                       gpio4: gpio@30230000 {
+                               compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+                               reg = <0x30230000 0x10000>;
+                               interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                       };
+
+                       gpio5: gpio@30240000 {
+                               compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+                               reg = <0x30240000 0x10000>;
+                               interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                       };
+
+                       gpio6: gpio@30250000 {
+                               compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+                               reg = <0x30250000 0x10000>;
+                               interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                       };
+
+                       gpio7: gpio@30260000 {
+                               compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+                               reg = <0x30260000 0x10000>;
+                               interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+                               gpio-controller;
+                               #gpio-cells = <2>;
+                               interrupt-controller;
+                               #interrupt-cells = <2>;
+                       };
+
+                       gpt1: gpt@302d0000 {
+                               compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+                               reg = <0x302d0000 0x10000>;
+                               interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_CLK_DUMMY>,
+                                        <&clks IMX7D_GPT1_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                       };
+
+                       gpt2: gpt@302e0000 {
+                               compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+                               reg = <0x302e0000 0x10000>;
+                               interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_CLK_DUMMY>,
+                                        <&clks IMX7D_GPT2_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       gpt3: gpt@302f0000 {
+                               compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+                               reg = <0x302f0000 0x10000>;
+                               interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_CLK_DUMMY>,
+                                        <&clks IMX7D_GPT3_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       gpt4: gpt@30300000 {
+                               compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+                               reg = <0x30300000 0x10000>;
+                               interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_CLK_DUMMY>,
+                                        <&clks IMX7D_GPT4_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       iomuxc: iomuxc@30330000 {
+                               compatible = "fsl,imx7d-iomuxc";
+                               reg = <0x30330000 0x10000>;
+                       };
+
+                       gpr: iomuxc-gpr@30340000 {
+                               compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+                               reg = <0x30340000 0x10000>;
+                       };
+
+                       ocotp: ocotp-ctrl@30350000 {
+                               compatible = "syscon";
+                               reg = <0x30350000 0x10000>;
+                               clocks = <&clks IMX7D_CLK_DUMMY>;
+                               status = "disabled";
+                       };
+
+                       anatop: anatop@30360000 {
+                               compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+                                       "syscon", "simple-bus";
+                               reg = <0x30360000 0x10000>;
+                               interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                                       <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+                               reg_1p0d: regulator-vdd1p0d@210 {
+                                       compatible = "fsl,anatop-regulator";
+                                       regulator-name = "vdd1p0d";
+                                       regulator-min-microvolt = <800000>;
+                                       regulator-max-microvolt = <1200000>;
+                                       anatop-reg-offset = <0x210>;
+                                       anatop-vol-bit-shift = <8>;
+                                       anatop-vol-bit-width = <5>;
+                                       anatop-min-bit-val = <8>;
+                                       anatop-min-voltage = <800000>;
+                                       anatop-max-voltage = <1200000>;
+                                       anatop-enable-bit = <31>;
+                               };
+                       };
+
+                       snvs: snvs@30370000 {
+                               compatible = "fsl,sec-v4.0-mon", "simple-bus";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               ranges = <0 0x30370000 0x10000>;
+
+                               snvs-rtc-lp@34 {
+                                       compatible = "fsl,sec-v4.0-mon-rtc-lp";
+                                       reg = <0x34 0x58>;
+                                       interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+                                                    <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+                               };
+                       };
+
+                       clks: ccm@30380000 {
+                               compatible = "fsl,imx7d-ccm";
+                               reg = <0x30380000 0x10000>;
+                               interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+                               #clock-cells = <1>;
+                               clocks = <&ckil>, <&osc>;
+                               clock-names = "ckil", "osc";
+                       };
+
+                       src: src@30390000 {
+                               compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+                               reg = <0x30390000 0x10000>;
+                               interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+                               #reset-cells = <1>;
+                       };
+               };
+
+               aips3: aips-bus@30800000 {
+                       compatible = "fsl,aips-bus", "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       reg = <0x30800000 0x400000>;
+                       ranges;
+
+                       uart1: serial@30860000 {
+                               compatible = "fsl,imx7d-uart",
+                                            "fsl,imx6q-uart";
+                               reg = <0x30860000 0x10000>;
+                               interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+                                       <&clks IMX7D_UART1_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       uart2: serial@30870000 {
+                               compatible = "fsl,imx7d-uart",
+                                            "fsl,imx6q-uart";
+                               reg = <0x30870000 0x10000>;
+                               interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+                                       <&clks IMX7D_UART2_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       uart3: serial@30880000 {
+                               compatible = "fsl,imx7d-uart",
+                                            "fsl,imx6q-uart";
+                               reg = <0x30880000 0x10000>;
+                               interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+                                       <&clks IMX7D_UART3_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       i2c1: i2c@30a20000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+                               reg = <0x30a20000 0x10000>;
+                               interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+                               status = "disabled";
+                       };
+
+                       i2c2: i2c@30a30000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+                               reg = <0x30a30000 0x10000>;
+                               interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+                               status = "disabled";
+                       };
+
+                       i2c3: i2c@30a40000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+                               reg = <0x30a40000 0x10000>;
+                               interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+                               status = "disabled";
+                       };
+
+                       i2c4: i2c@30a50000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+                               reg = <0x30a50000 0x10000>;
+                               interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+                               status = "disabled";
+                       };
+
+                       uart4: serial@30a60000 {
+                               compatible = "fsl,imx7d-uart",
+                                            "fsl,imx6q-uart";
+                               reg = <0x30a60000 0x10000>;
+                               interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+                                       <&clks IMX7D_UART4_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       uart5: serial@30a70000 {
+                               compatible = "fsl,imx7d-uart",
+                                            "fsl,imx6q-uart";
+                               reg = <0x30a70000 0x10000>;
+                               interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+                                       <&clks IMX7D_UART5_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       uart6: serial@30a80000 {
+                               compatible = "fsl,imx7d-uart",
+                                            "fsl,imx6q-uart";
+                               reg = <0x30a80000 0x10000>;
+                               interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+                                       <&clks IMX7D_UART6_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       uart7: serial@30a90000 {
+                               compatible = "fsl,imx7d-uart",
+                                            "fsl,imx6q-uart";
+                               reg = <0x30a90000 0x10000>;
+                               interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+                                       <&clks IMX7D_UART7_ROOT_CLK>;
+                               clock-names = "ipg", "per";
+                               status = "disabled";
+                       };
+
+                       usdhc1: usdhc@30b40000 {
+                               compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+                               reg = <0x30b40000 0x10000>;
+                               interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_CLK_DUMMY>,
+                                       <&clks IMX7D_CLK_DUMMY>,
+                                       <&clks IMX7D_USDHC1_ROOT_CLK>;
+                               clock-names = "ipg", "ahb", "per";
+                               bus-width = <4>;
+                               status = "disabled";
+                       };
+
+                       usdhc2: usdhc@30b50000 {
+                               compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+                               reg = <0x30b50000 0x10000>;
+                               interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_CLK_DUMMY>,
+                                       <&clks IMX7D_CLK_DUMMY>,
+                                       <&clks IMX7D_USDHC2_ROOT_CLK>;
+                               clock-names = "ipg", "ahb", "per";
+                               bus-width = <4>;
+                               status = "disabled";
+                       };
+
+                       usdhc3: usdhc@30b60000 {
+                               compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+                               reg = <0x30b60000 0x10000>;
+                               interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clks IMX7D_CLK_DUMMY>,
+                                       <&clks IMX7D_CLK_DUMMY>,
+                                       <&clks IMX7D_USDHC3_ROOT_CLK>;
+                               clock-names = "ipg", "ahb", "per";
+                               bus-width = <4>;
+                               status = "disabled";
+                       };
+               };
+       };
+};