PCI: imx6: Do not switch speed if Gen2 is disabled

Save a bit of time and avoid going through link speed change procedure in
configuration where link max speed is limited to Gen1 in DT.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: yurovsky@gmail.com
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dong Aisheng <dongas86@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org

diff --git a/drivers/pci/dwc/pci-imx6.c b/drivers/pci/dwc/pci-imx6.c
index 793b008..102edcf 100644 (file)
--- a/drivers/pci/dwc/pci-imx6.c
+++ b/drivers/pci/dwc/pci-imx6.c
@@ -533,40 +533,40 @@ static int imx6_pcie_establish_link(struct imx6_pcie *imx6_pcie)
                tmp &= ~PCIE_RC_LCR_MAX_LINK_SPEEDS_MASK;
                tmp |= PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2;
                dw_pcie_writel_dbi(pci, PCIE_RC_LCR, tmp);
-       } else {
-               dev_info(dev, "Link: Gen2 disabled\n");
-       }
-
-       /*
-        * Start Directed Speed Change so the best possible speed both link
-        * partners support can be negotiated.
-        */
-       tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-       tmp |= PORT_LOGIC_SPEED_CHANGE;
-       dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
 
-       if (imx6_pcie->variant != IMX7D) {
                /*
-                * On i.MX7, DIRECT_SPEED_CHANGE behaves differently
-                * from i.MX6 family when no link speed transition
-                * occurs and we go Gen1 -> yep, Gen1. The difference
-                * is that, in such case, it will not be cleared by HW
-                * which will cause the following code to report false
-                * failure.
+                * Start Directed Speed Change so the best possible
+                * speed both link partners support can be negotiated.
                 */
+               tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+               tmp |= PORT_LOGIC_SPEED_CHANGE;
+               dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
+
+               if (imx6_pcie->variant != IMX7D) {
+                       /*
+                        * On i.MX7, DIRECT_SPEED_CHANGE behaves differently
+                        * from i.MX6 family when no link speed transition
+                        * occurs and we go Gen1 -> yep, Gen1. The difference
+                        * is that, in such case, it will not be cleared by HW
+                        * which will cause the following code to report false
+                        * failure.
+                        */
+
+                       ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
+                       if (ret) {
+                               dev_err(dev, "Failed to bring link up!\n");
+                               goto err_reset_phy;
+                       }
+               }
 
-               ret = imx6_pcie_wait_for_speed_change(imx6_pcie);
+               /* Make sure link training is finished as well! */
+               ret = imx6_pcie_wait_for_link(imx6_pcie);
                if (ret) {
                        dev_err(dev, "Failed to bring link up!\n");
                        goto err_reset_phy;
                }
-       }
-
-       /* Make sure link training is finished as well! */
-       ret = imx6_pcie_wait_for_link(imx6_pcie);
-       if (ret) {
-               dev_err(dev, "Failed to bring link up!\n");
-               goto err_reset_phy;
+       } else {
+               dev_info(dev, "Link: Gen2 disabled\n");
        }
 
        tmp = dw_pcie_readl_dbi(pci, PCIE_RC_LCSR);