static void get_sectorsize(struct scsi_cd *);
static void get_capabilities(struct scsi_cd *);
-static int sr_media_change(struct cdrom_device_info *, int);
+static unsigned int sr_check_events(struct cdrom_device_info *cdi,
+ unsigned int clearing, int slot);
static int sr_packet(struct cdrom_device_info *, struct packet_command *);
static struct cdrom_device_ops sr_dops = {
.open = sr_open,
.release = sr_release,
.drive_status = sr_drive_status,
- .media_changed = sr_media_change,
+ .check_events = sr_check_events,
.tray_move = sr_tray_move,
.lock_door = sr_lock_door,
.select_speed = sr_select_speed,
mutex_unlock(&sr_ref_mutex);
}
+static unsigned int sr_get_events(struct scsi_device *sdev)
+{
+ u8 buf[8];
+ u8 cmd[] = { GET_EVENT_STATUS_NOTIFICATION,
+ 1, /* polled */
+ 0, 0, /* reserved */
+ 1 << 4, /* notification class: media */
+ 0, 0, /* reserved */
+ 0, sizeof(buf), /* allocation length */
+ 0, /* control */
+ };
+ struct event_header *eh = (void *)buf;
+ struct media_event_desc *med = (void *)(buf + 4);
+ struct scsi_sense_hdr sshdr;
+ int result;
+
+ result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buf, sizeof(buf),
+ &sshdr, SR_TIMEOUT, MAX_RETRIES, NULL);
+ if (scsi_sense_valid(&sshdr) && sshdr.sense_key == UNIT_ATTENTION)
+ return DISK_EVENT_MEDIA_CHANGE;
+
+ if (result || be16_to_cpu(eh->data_len) < sizeof(*med))
+ return 0;
+
+ if (eh->nea || eh->notification_class != 0x4)
+ return 0;
+
+ if (med->media_event_code == 1)
+ return DISK_EVENT_EJECT_REQUEST;
+ else if (med->media_event_code == 2)
+ return DISK_EVENT_MEDIA_CHANGE;
+ return 0;
+}
+
/*
- * This function checks to see if the media has been changed in the
- * CDROM drive. It is possible that we have already sensed a change,
- * or the drive may have sensed one and not yet reported it. We must
- * be ready for either case. This function always reports the current
- * value of the changed bit. If flag is 0, then the changed bit is reset.
- * This function could be done as an ioctl, but we would need to have
- * an inode for that to work, and we do not always have one.
+ * This function checks to see if the media has been changed or eject
+ * button has been pressed. It is possible that we have already
+ * sensed a change, or the drive may have sensed one and not yet
+ * reported it. The past events are accumulated in sdev->changed and
+ * returned together with the current state.
*/
-
-static int sr_media_change(struct cdrom_device_info *cdi, int slot)
+static unsigned int sr_check_events(struct cdrom_device_info *cdi,
+ unsigned int clearing, int slot)
{
struct scsi_cd *cd = cdi->handle;
- int retval;
- struct scsi_sense_hdr *sshdr;
+ bool last_present;
+ struct scsi_sense_hdr sshdr;
+ unsigned int events;
+ int ret;
- if (CDSL_CURRENT != slot) {
- /* no changer support */
- return -EINVAL;
- }
+ /* no changer support */
+ if (CDSL_CURRENT != slot)
+ return 0;
+
+ events = sr_get_events(cd->device);
+ /*
+ * GET_EVENT_STATUS_NOTIFICATION is enough unless MEDIA_CHANGE
+ * is being cleared. Note that there are devices which hang
+ * if asked to execute TUR repeatedly.
+ */
+ if (!(clearing & DISK_EVENT_MEDIA_CHANGE))
+ goto skip_tur;
+
+ /* let's see whether the media is there with TUR */
+ last_present = cd->media_present;
+ ret = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr);
- sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
- retval = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES,
- sshdr);
/*
* Media is considered to be present if TUR succeeds or fails with
* sense data indicating something other than media-not-present
* (ASC 0x3a).
*/
- if (!scsi_status_is_good(retval) &&
- (!scsi_sense_valid(sshdr) || sshdr->asc == 0x3a)) {
- /*
- * Probably no media in the device. Mark as changed, and
- * we will figure it out later once the drive is available
- * again.
- */
- cd->device->changed = 1;
- /* This will force a flush, if called from check_disk_change */
- retval = 1;
- goto out;
- };
+ cd->media_present = scsi_status_is_good(ret) ||
+ (scsi_sense_valid(&sshdr) && sshdr.asc != 0x3a);
- retval = cd->device->changed;
- cd->device->changed = 0;
- /* If the disk changed, the capacity will now be different,
- * so we force a re-read of this information */
- if (retval) {
- /* check multisession offset etc */
- sr_cd_check(cdi);
- get_sectorsize(cd);
+ if (last_present != cd->media_present)
+ events |= DISK_EVENT_MEDIA_CHANGE;
+skip_tur:
+ if (cd->device->changed) {
+ events |= DISK_EVENT_MEDIA_CHANGE;
+ cd->device->changed = 0;
}
-out:
- /* Notify userspace, that media has changed. */
- if (retval != cd->previous_state)
+ /* for backward compatibility */
+ if (events & DISK_EVENT_MEDIA_CHANGE)
sdev_evt_send_simple(cd->device, SDEV_EVT_MEDIA_CHANGE,
GFP_KERNEL);
- cd->previous_state = retval;
- kfree(sshdr);
-
- return retval;
+ return events;
}
-
+
/*
* sr_done is the interrupt routine for the device driver.
*
return ret;
}
-static int sr_block_media_changed(struct gendisk *disk)
+static unsigned int sr_block_check_events(struct gendisk *disk,
+ unsigned int clearing)
{
struct scsi_cd *cd = scsi_cd(disk);
- return cdrom_media_changed(&cd->cdi);
+ return cdrom_check_events(&cd->cdi, clearing);
+}
+
+static int sr_block_revalidate_disk(struct gendisk *disk)
+{
+ struct scsi_cd *cd = scsi_cd(disk);
+ struct scsi_sense_hdr sshdr;
+
+ /* if the unit is not ready, nothing more to do */
+ if (scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES, &sshdr))
+ return 0;
+
+ sr_cd_check(&cd->cdi);
+ get_sectorsize(cd);
+ return 0;
}
static const struct block_device_operations sr_bdops =
.open = sr_block_open,
.release = sr_block_release,
.ioctl = sr_block_ioctl,
- .media_changed = sr_block_media_changed,
+ .check_events = sr_block_check_events,
+ .revalidate_disk = sr_block_revalidate_disk,
/*
* No compat_ioctl for now because sr_block_ioctl never
* seems to pass arbitary ioctls down to host drivers.
sprintf(disk->disk_name, "sr%d", minor);
disk->fops = &sr_bdops;
disk->flags = GENHD_FL_CD;
+ disk->events = DISK_EVENT_MEDIA_CHANGE | DISK_EVENT_EJECT_REQUEST;
blk_queue_rq_timeout(sdev->request_queue, SR_TIMEOUT);
cd->disk = disk;
cd->capacity = 0x1fffff;
cd->device->changed = 1; /* force recheck CD type */
- cd->previous_state = 1;
+ cd->media_present = 1;
cd->use = 1;
cd->readcd_known = 0;
cd->readcd_cdda = 0;