removing extended attributes) the on-disk superblock feature
bit field will be updated to reflect this format being in use.
+ CRC enabled filesystems always use the attr2 format, and so
+ will reject the noattr2 mount option if it is set.
+
barrier
Enables the use of block layer write barriers for writes into
the journal and unwritten extent conversion. This allows for
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
-/*
- * We need to delay page freeing for SMP as other CPUs can access pages
- * which have been removed but not yet had their TLB entries invalidated.
- * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
- * we need to apply this same delaying tactic to ensure correct operation.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
-#define tlb_fast_mode(tlb) 0
-#else
-#define tlb_fast_mode(tlb) 1
-#endif
-
#define MMU_GATHER_BUNDLE 8
/*
static inline void tlb_flush_mmu(struct mmu_gather *tlb)
{
tlb_flush(tlb);
- if (!tlb_fast_mode(tlb)) {
- free_pages_and_swap_cache(tlb->pages, tlb->nr);
- tlb->nr = 0;
- if (tlb->pages == tlb->local)
- __tlb_alloc_page(tlb);
- }
+ free_pages_and_swap_cache(tlb->pages, tlb->nr);
+ tlb->nr = 0;
+ if (tlb->pages == tlb->local)
+ __tlb_alloc_page(tlb);
}
static inline void
static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
{
- if (tlb_fast_mode(tlb)) {
- free_page_and_swap_cache(page);
- return 1; /* avoid calling tlb_flush_mmu */
- }
-
tlb->pages[tlb->nr++] = page;
VM_BUG_ON(tlb->nr > tlb->max);
return tlb->max - tlb->nr;
#include <asm/tlbflush.h>
#include <asm/machvec.h>
-#ifdef CONFIG_SMP
-# define tlb_fast_mode(tlb) ((tlb)->nr == ~0U)
-#else
-# define tlb_fast_mode(tlb) (1)
-#endif
-
/*
* If we can't allocate a page to make a big batch of page pointers
* to work on, then just handle a few from the on-stack structure.
struct mmu_gather {
struct mm_struct *mm;
- unsigned int nr; /* == ~0U => fast mode */
+ unsigned int nr;
unsigned int max;
unsigned char fullmm; /* non-zero means full mm flush */
unsigned char need_flush; /* really unmapped some PTEs? */
static inline void
ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
{
+ unsigned long i;
unsigned int nr;
if (!tlb->need_flush)
/* lastly, release the freed pages */
nr = tlb->nr;
- if (!tlb_fast_mode(tlb)) {
- unsigned long i;
- tlb->nr = 0;
- tlb->start_addr = ~0UL;
- for (i = 0; i < nr; ++i)
- free_page_and_swap_cache(tlb->pages[i]);
- }
+
+ tlb->nr = 0;
+ tlb->start_addr = ~0UL;
+ for (i = 0; i < nr; ++i)
+ free_page_and_swap_cache(tlb->pages[i]);
}
static inline void __tlb_alloc_page(struct mmu_gather *tlb)
tlb->mm = mm;
tlb->max = ARRAY_SIZE(tlb->local);
tlb->pages = tlb->local;
- /*
- * Use fast mode if only 1 CPU is online.
- *
- * It would be tempting to turn on fast-mode for full_mm_flush as well. But this
- * doesn't work because of speculative accesses and software prefetching: the page
- * table of "mm" may (and usually is) the currently active page table and even
- * though the kernel won't do any user-space accesses during the TLB shoot down, a
- * compiler might use speculation or lfetch.fault on what happens to be a valid
- * user-space address. This in turn could trigger a TLB miss fault (or a VHPT
- * walk) and re-insert a TLB entry we just removed. Slow mode avoids such
- * problems. (We could make fast-mode work by switching the current task to a
- * different "mm" during the shootdown.) --davidm 08/02/2002
- */
- tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
+ tlb->nr = 0;
tlb->fullmm = full_mm_flush;
tlb->start_addr = ~0UL;
}
{
tlb->need_flush = 1;
- if (tlb_fast_mode(tlb)) {
- free_page_and_swap_cache(page);
- return 1; /* avoid calling tlb_flush_mmu */
- }
-
if (!tlb->nr && tlb->pages == tlb->local)
__tlb_alloc_page(tlb);
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
- data = phys_to_virt(pa_data);
+ data = ioremap(pa_data, sizeof(*rom));
+ if (!data)
+ return -ENOMEM;
if (data->type == SETUP_PCI) {
rom = (struct pci_setup_rom *)data;
}
}
pa_data = data->next;
+ iounmap(data);
}
return 0;
}
while (chan->indio_dev) {
if (chan->indio_dev != indio_dev) {
ret = -EINVAL;
- goto error_release_channels;
+ goto error_free_scan_mask;
}
set_bit(chan->channel->scan_index,
cb_buff->buffer.scan_mask);
return cb_buff;
+error_free_scan_mask:
+ kfree(cb_buff->buffer.scan_mask);
error_release_channels:
iio_channel_release_all(cb_buff->channels);
error_free_cb_buff:
void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buff)
{
+ kfree(cb_buff->buffer.scan_mask);
iio_channel_release_all(cb_buff->channels);
kfree(cb_buff);
}
(pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS |
ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N |
ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) |
- ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x9)));
+ ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3)));
st->regs[ADF4350_REG3] = pdata->r3_user_settings &
(ADF4350_REG3_12BIT_CLKDIV(0xFFF) |
channel->indio_dev = indio_dev;
index = iiospec.args_count ? iiospec.args[0] : 0;
if (index >= indio_dev->num_channels) {
- return -EINVAL;
+ err = -EINVAL;
goto err_put;
}
channel->channel = &indio_dev->channels[index];
s64 raw64 = raw;
int ret;
- ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_SCALE);
+ ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET);
if (ret == 0)
raw64 += offset;
}
rv = alarm_do_ioctl(file, cmd, &ts);
+ if (rv)
+ return rv;
switch (ANDROID_ALARM_BASE_CMD(cmd)) {
case ANDROID_ALARM_GET_TIME(0):
break;
}
- return rv;
+ return 0;
}
#ifdef CONFIG_COMPAT
static long alarm_compat_ioctl(struct file *file, unsigned int cmd,
}
rv = alarm_do_ioctl(file, cmd, &ts);
+ if (rv)
+ return rv;
switch (ANDROID_ALARM_BASE_CMD(cmd)) {
case ANDROID_ALARM_GET_TIME(0): /* NOTE: we modified cmd above */
break;
}
- return rv;
+ return 0;
}
#endif
/* Set device flags indicating whether the HCD supports DMA */
if (hsotg->core_params->dma_enable > 0) {
- if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0)
- dev_warn(hsotg->dev,
- "can't enable workaround for >2GB RAM\n");
+ if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
+ dev_warn(hsotg->dev, "can't set DMA mask\n");
if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0)
dev_warn(hsotg->dev,
"can't enable workaround for >2GB RAM\n");
#ifndef _ZCACHE_RAMSTER_H_
#define _ZCACHE_RAMSTER_H_
-#ifdef CONFIG_RAMSTER_MODULE
-#define CONFIG_RAMSTER
-#endif
-
#ifdef CONFIG_RAMSTER
#include "ramster/ramster.h"
#else
#include <linux/atomic.h>
#include "debug.h"
+ssize_t ramster_foreign_eph_pages;
+ssize_t ramster_foreign_pers_pages;
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
/* Used by this code. */
long ramster_flnodes;
-ssize_t ramster_foreign_eph_pages;
-ssize_t ramster_foreign_pers_pages;
/* FIXME frontswap selfshrinking knobs in debugfs? */
static LIST_HEAD(ramster_rem_op_list);
inc_ramster_foreign_eph_pages();
} else {
dec_ramster_foreign_eph_pages();
+#ifdef CONFIG_RAMSTER_DEBUG
WARN_ON_ONCE(ramster_foreign_eph_pages < 0);
+#endif
}
} else {
if (count > 0) {
inc_ramster_foreign_pers_pages();
} else {
dec_ramster_foreign_pers_pages();
+#ifdef CONFIG_RAMSTER_DEBUG
WARN_ON_ONCE(ramster_foreign_pers_pages < 0);
+#endif
}
}
}
if (nr_uarts > UART_NR)
nr_uarts = UART_NR;
- for (i = 0; i < UART_NR; i++) {
+ for (i = 0; i < nr_uarts; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
struct uart_port *port = &up->port;
* if so, search for the first available port that does have
* console support.
*/
- if (co->index >= UART_NR)
+ if (co->index >= nr_uarts)
co->index = 0;
port = &serial8250_ports[co->index].port;
if (!port->iobase && !port->membase)
int line;
struct uart_port *port;
- for (line = 0; line < UART_NR; line++) {
+ for (line = 0; line < nr_uarts; line++) {
port = &serial8250_ports[line].port;
if (uart_match_port(p, port))
return line;
{
int i;
- for (i = 0; i < UART_NR; i++) {
+ for (i = 0; i < nr_uarts; i++) {
struct uart_8250_port *up = &serial8250_ports[i];
if (up->port.dev == &dev->dev)
/*
* First, find a port entry which matches.
*/
- for (i = 0; i < UART_NR; i++)
+ for (i = 0; i < nr_uarts; i++)
if (uart_match_port(&serial8250_ports[i].port, port))
return &serial8250_ports[i];
* free entry. We look for one which hasn't been previously
* used (indicated by zero iobase).
*/
- for (i = 0; i < UART_NR; i++)
+ for (i = 0; i < nr_uarts; i++)
if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
serial8250_ports[i].port.iobase == 0)
return &serial8250_ports[i];
* That also failed. Last resort is to find any entry which
* doesn't have a real port associated with it.
*/
- for (i = 0; i < UART_NR; i++)
+ for (i = 0; i < nr_uarts; i++)
if (serial8250_ports[i].port.type == PORT_UNKNOWN)
return &serial8250_ports[i];
temp = readl(sport->port.membase + UCR2);
temp |= (UCR2_RXEN | UCR2_TXEN);
+ if (!sport->have_rtscts)
+ temp |= UCR2_IRTS;
writel(temp, sport->port.membase + UCR2);
if (USE_IRDA(sport)) {
ourport->tx_irq = ret;
ourport->clk = clk_get(&platdev->dev, "uart");
+ if (IS_ERR(ourport->clk)) {
+ pr_err("%s: Controller clock not found\n",
+ dev_name(&platdev->dev));
+ return PTR_ERR(ourport->clk);
+ }
+
+ ret = clk_prepare_enable(ourport->clk);
+ if (ret) {
+ pr_err("uart: clock failed to prepare+enable: %d\n", ret);
+ clk_put(ourport->clk);
+ return ret;
+ }
/* Keep all interrupts masked and cleared */
if (s3c24xx_serial_has_interrupt_mask(port)) {
/* reset the fifos (and setup the uart) */
s3c24xx_serial_resetport(port, cfg);
+ clk_disable_unprepare(ourport->clk);
return 0;
}
goto error;
}
for (totlen = u = 0; u < uurb->number_of_packets; u++) {
- /* arbitrary limit,
- * sufficient for USB 2.0 high-bandwidth iso */
- if (isopkt[u].length > 8192) {
+ /*
+ * arbitrary limit need for USB 3.0
+ * bMaxBurst (0~15 allowed, 1~16 packets)
+ * bmAttributes (bit 1:0, mult 0~2, 1~3 packets)
+ * sizemax: 1024 * 16 * 3 = 49152
+ */
+ if (isopkt[u].length > 49152) {
ret = -EINVAL;
goto error;
}
{
struct dwc3_exynos *exynos = platform_get_drvdata(pdev);
+ device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
platform_device_unregister(exynos->usb2_phy);
platform_device_unregister(exynos->usb3_phy);
- device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
clk_disable_unprepare(exynos->clk);
{
struct dwc3_pci *glue = pci_get_drvdata(pci);
+ platform_device_unregister(glue->dwc3);
platform_device_unregister(glue->usb2_phy);
platform_device_unregister(glue->usb3_phy);
- platform_device_unregister(glue->dwc3);
pci_set_drvdata(pci, NULL);
pci_disable_device(pci);
}
dep = dwc->eps[epnum];
if (!dep)
continue;
-
- dwc3_free_trb_pool(dep);
-
- if (epnum != 0 && epnum != 1)
+ /*
+ * Physical endpoints 0 and 1 are special; they form the
+ * bi-directional USB endpoint 0.
+ *
+ * For those two physical endpoints, we don't allocate a TRB
+ * pool nor do we add them the endpoints list. Due to that, we
+ * shouldn't do these two operations otherwise we would end up
+ * with all sorts of bugs when removing dwc3.ko.
+ */
+ if (epnum != 0 && epnum != 1) {
+ dwc3_free_trb_pool(dep);
list_del(&dep->endpoint.ep_list);
+ }
kfree(dep);
}
}
static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
/* carryover low/fullspeed bandwidth that crosses uframe boundries */
static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
/* reschedule QH iff another request is queued */
if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
rc = qh_schedule(ehci, qh);
+ if (rc == 0) {
+ qh_refresh(ehci, qh);
+ qh_link_periodic(ehci, qh);
+ }
/* An error here likely indicates handshake failure
* or no space left in the schedule. Neither fault
*
* FIXME kill the now-dysfunctional queued urbs
*/
- if (rc != 0)
+ else {
ehci_err(ehci, "can't reschedule qh %p, err %d\n",
qh, rc);
+ }
}
/* maybe turn off periodic schedule */
}
spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!xhci->rh_bw)
+ goto no_bw;
+
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
for (i = 0; i < num_ports; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
}
}
+no_bw:
xhci->num_usb2_ports = 0;
xhci->num_usb3_ports = 0;
xhci->num_active_eps = 0;
u32 page_size, temp;
int i;
+ INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+ INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
for (i = 0; i < 16; i++) {
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
if (!xhci->cmd_ring)
goto fail;
- INIT_LIST_HEAD(&xhci->cancel_cmd_list);
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
if (xhci_setup_port_arrays(xhci, flags))
goto fail;
- INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
/* Enable USB 3.0 device notifications for function remote wake, which
* is necessary for allowing USB 3.0 devices to do remote wakeup from
* U3 (device suspend).
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ /*
+ * Systems with the TI redriver that loses port status change events
+ * need to have the registers polled during D3, so avoid D3cold.
+ */
+ if (xhci_compliance_mode_recovery_timer_quirk_check())
+ pdev->no_d3cold = true;
return xhci_suspend(xhci);
}
* Systems:
* Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
*/
-static bool compliance_mode_recovery_timer_quirk_check(void)
+bool xhci_compliance_mode_recovery_timer_quirk_check(void)
{
const char *dmi_product_name, *dmi_sys_vendor;
xhci_dbg(xhci, "Finished xhci_init\n");
/* Initializing Compliance Mode Recovery Data If Needed */
- if (compliance_mode_recovery_timer_quirk_check()) {
+ if (xhci_compliance_mode_recovery_timer_quirk_check()) {
xhci->quirks |= XHCI_COMP_MODE_QUIRK;
compliance_mode_recovery_timer_init(xhci);
}
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
int retval = 0;
+ bool comp_timer_running = false;
/* Wait a bit if either of the roothubs need to settle from the
* transition into bus suspend.
/* If restore operation fails, re-initialize the HC during resume */
if ((temp & STS_SRE) || hibernated) {
+
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ !(xhci_all_ports_seen_u0(xhci))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+ }
+
/* Let the USB core know _both_ roothubs lost power. */
usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
retval = xhci_init(hcd->primary_hcd);
if (retval)
return retval;
+ comp_timer_running = true;
+
xhci_dbg(xhci, "Start the primary HCD\n");
retval = xhci_run(hcd->primary_hcd);
if (!retval) {
* to suffer the Compliance Mode issue again. It doesn't matter if
* ports have entered previously to U0 before system's suspension.
*/
- if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
compliance_mode_recovery_timer_init(xhci);
/* Re-enable port polling. */
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+/* xHCI quirks */
+bool xhci_compliance_mode_recovery_timer_quirk_check(void);
+
#endif /* __LINUX_XHCI_HCD_H */
void __iomem *mbase = musb->mregs;
struct dma_channel *dma;
bool transfer_pending = false;
- static bool use_sg;
musb_ep_select(mbase, epnum);
tx_csr = musb_readw(epio, MUSB_TXCSR);
* NULL.
*/
if (!urb->transfer_buffer)
- use_sg = true;
+ qh->use_sg = true;
- if (use_sg) {
+ if (qh->use_sg) {
/* sg_miter_start is already done in musb_ep_program */
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
qh->segsize = length;
- if (use_sg) {
+ if (qh->use_sg) {
if (offset + length >= urb->transfer_buffer_length)
- use_sg = false;
+ qh->use_sg = false;
}
musb_ep_select(mbase, epnum);
bool done = false;
u32 status;
struct dma_channel *dma;
- static bool use_sg;
unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
musb_ep_select(mbase, epnum);
* NULL.
*/
if (!urb->transfer_buffer) {
- use_sg = true;
+ qh->use_sg = true;
sg_miter_start(&qh->sg_miter, urb->sg, 1,
sg_flags);
}
- if (use_sg) {
+ if (qh->use_sg) {
if (!sg_miter_next(&qh->sg_miter)) {
dev_err(musb->controller, "error: sg list empty\n");
sg_miter_stop(&qh->sg_miter);
urb->actual_length += xfer_len;
qh->offset += xfer_len;
if (done) {
- if (use_sg)
- use_sg = false;
+ if (qh->use_sg)
+ qh->use_sg = false;
if (urb->status == -EINPROGRESS)
urb->status = status;
u16 frame; /* for periodic schedule */
unsigned iso_idx; /* in urb->iso_frame_desc[] */
struct sg_mapping_iter sg_miter; /* for highmem in PIO mode */
+ bool use_sg; /* to track urb using sglist */
};
/* map from control or bulk queue head to the first qh on that ring */
#define DRIVER_NAME "ark3116"
/* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x6547, 0x0232) },
static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ } /* Terminating entry */
};
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
* Cypress serial helper functions
*****************************************************************************/
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+ return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
if (unstable_bauds)
return new_rate;
+ /* FRWD Dongle uses 115200 bps */
+ if (is_frwd(port->serial->dev))
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
return -ENOMEM;
}
- usb_reset_configuration(serial->dev);
+ /* Skip reset for FRWD device. It is a workaound:
+ device hangs if it receives SET_CONFIGURE in Configured
+ state. */
+ if (!is_frwd(serial->dev))
+ usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD 0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
+
/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM 0x0d9f
#define PRODUCT_ID_UPS 0x0002
usb_bulk_msg(serial->dev,
usb_sndbulkpipe(serial->dev,
port->bulk_out_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
usb_bulk_msg(serial->dev,
usb_rcvbulkpipe(serial->dev,
port->bulk_in_endpointAddress), buf,
- count, &actual, HZ * 1);
+ count, &actual, 1000);
if (status != IUU_OPERATION_OK)
dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
struct keyspan_serial_private *s_priv;
struct keyspan_port_private *p_priv;
const struct keyspan_device_details *d_details;
- int outcont_urb;
struct urb *this_urb;
int device_port, err;
d_details = s_priv->device_details;
device_port = port->number - port->serial->minor;
- outcont_urb = d_details->outcont_endpoints[port->number];
this_urb = p_priv->outcont_urb;
dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err != 0)
dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
-#if 0
- else {
- dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__
- outcont_urb, this_urb->transfer_buffer_length,
- usb_pipeendpoint(this_urb->pipe));
- }
-#endif
-
return 0;
}
#define DRIVER_DESC "Moschip USB Serial Driver"
/* default urb timeout */
-#define MOS_WDR_TIMEOUT (HZ * 5)
+#define MOS_WDR_TIMEOUT 5000
#define MOS_MAX_PORT 0x02
#define MOS_WRITE 0x0E
__u8 requesttype = (__u8)0xc0;
__u16 index = get_reg_index(reg);
__u16 value = get_reg_value(reg, serial_portnum);
- int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
- index, data, 1, MOS_WDR_TIMEOUT);
- if (status < 0)
+ u8 *buf;
+ int status;
+
+ buf = kmalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+ index, buf, 1, MOS_WDR_TIMEOUT);
+ if (status == 1)
+ *data = *buf;
+ else if (status < 0)
dev_err(&usbdev->dev,
"mos7720: usb_control_msg() failed: %d", status);
+ kfree(buf);
+
return status;
}
mos7720_port->shadowMCR |= (UART_MCR_XONANY);
/* To set hardware flow control to the specified *
* serial port, in SP1/2_CONTROL_REG */
- if (port->number)
+ if (port_number)
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
else
write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
/* setting configuration feature to one */
usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
- (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+ (__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
/* start the interrupt urb */
ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
/* wait for synchronous usb calls to return */
if (mos_parport->msg_pending)
wait_for_completion_timeout(&mos_parport->syncmsg_compl,
- MOS_WDR_TIMEOUT);
+ msecs_to_jiffies(MOS_WDR_TIMEOUT));
parport_remove_port(mos_parport->pp);
usb_set_serial_data(serial, NULL);
static int mos7810_check(struct usb_serial *serial)
{
int i, pass_count = 0;
+ u8 *buf;
__u16 data = 0, mcr_data = 0;
__u16 test_pattern = 0x55AA;
+ int res;
+
+ buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (!buf)
+ return 0; /* failed to identify 7810 */
/* Store MCR setting */
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
- &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ if (res == VENDOR_READ_LENGTH)
+ mcr_data = *buf;
for (i = 0; i < 16; i++) {
/* Send the 1-bit test pattern out to MCS7810 test pin */
MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
/* Read the test pattern back */
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
- VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ res = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+ MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ if (res == VENDOR_READ_LENGTH)
+ data = *buf;
/* If this is a MCS7810 device, both test patterns must match */
if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
0, MOS_WDR_TIMEOUT);
+ kfree(buf);
+
if (pass_count == 16)
return 1;
static int mos7840_calc_num_ports(struct usb_serial *serial)
{
__u16 data = 0x00;
+ u8 *buf;
int mos7840_num_ports;
- usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
- VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+ if (buf) {
+ usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+ VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+ data = *buf;
+ kfree(buf);
+ }
if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
#define ZTE_PRODUCT_MF622 0x0001
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
-#define ZTE_PRODUCT_CDMA_TECH 0xfffe
-#define ZTE_PRODUCT_AC8710 0xfff1
-#define ZTE_PRODUCT_AC2726 0xfff5
-#define ZTE_PRODUCT_AC8710T 0xffff
#define ZTE_PRODUCT_MC2718 0xffe8
-#define ZTE_PRODUCT_AD3812 0xffeb
-#define ZTE_PRODUCT_MC2716 0xffed
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
.reserved = BIT(4),
};
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
- .sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
static const struct option_blacklist_info zte_mc2718_z_blacklist = {
.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
};
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
- .sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
static const struct option_blacklist_info huawei_cdc12_blacklist = {
.reserved = BIT(1) | BIT(2),
};
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */
+ .driver_info = (kernel_ulong_t) &net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
- { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+ /* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
- .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },
{USB_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
{USB_DEVICE(0x12D1, 0x14F0)}, /* Sony Gobi 3000 QDL */
{USB_DEVICE(0x12D1, 0x14F1)}, /* Sony Gobi 3000 Composite */
+ {USB_DEVICE(0x0AF0, 0x8120)}, /* Option GTM681W */
/* non Gobi Qualcomm serial devices */
{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)}, /* Sierra Wireless MC7700 Device Management */
unsigned int cmd, unsigned long arg)
{
struct usb_serial_port *port = tty->driver_data;
- int retval = -ENODEV;
+ int retval = -ENOIOCTLCMD;
dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd);
default:
if (port->serial->type->ioctl)
retval = port->serial->type->ioctl(tty, cmd, arg);
- else
- retval = -ENOIOCTLCMD;
}
return retval;
*/
#define COPY_PORT(dest, src) \
do { \
+ int i; \
+ \
+ for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) { \
+ dest->read_urbs[i] = src->read_urbs[i]; \
+ dest->read_urbs[i]->context = dest; \
+ dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
+ } \
dest->read_urb = src->read_urb; \
dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
dest->bulk_in_buffer = src->bulk_in_buffer; \
+ dest->bulk_in_size = src->bulk_in_size; \
dest->interrupt_in_urb = src->interrupt_in_urb; \
+ dest->interrupt_in_urb->context = dest; \
dest->interrupt_in_endpointAddress = \
src->interrupt_in_endpointAddress;\
dest->interrupt_in_buffer = src->interrupt_in_buffer; \
struct whiteheat_port_settings port_settings;
unsigned int cflag = tty->termios.c_cflag;
- port_settings.port = port->number + 1;
+ port_settings.port = port->number - port->serial->minor + 1;
/* get the byte size */
switch (cflag & CSIZE) {
int len;
unsigned char *buf;
- if (port->number != 0)
- return -ENODEV;
-
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return -ENOMEM;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0001, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st cmd and recieve data */
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 3 cmd */
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 5 cmd */
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 6 cmd */
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
kfree(buf);
int len;
unsigned char *buf;
- if (port->number != 0)
- return;
-
buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
if (!buf)
return;
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0002, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 2st ctl cmd(CTL 21 22 03 00 00 00 00 00 ) */
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 3st cmd and recieve data */
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 4 cmd */
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 5 cmd */
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
/* send 6 cmd */
result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x21, 0xa1,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 7 cmd */
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x20, 0x21,
0x0000, 0x0000, buf, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
debug_data(dev, __func__, len, buf, result);
/* send 8 cmd */
result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
0x22, 0x21,
0x0003, 0x0000, NULL, len,
- HZ * USB_CTRL_GET_TIMEOUT);
+ USB_CTRL_GET_TIMEOUT);
dev_dbg(dev, "result = %d\n", result);
kfree(buf);
}
static const struct usb_device_id id_table[] = {
- { USB_DEVICE(0x19d2, 0xffff) }, /* AC8700 */
- { USB_DEVICE(0x19d2, 0xfffe) },
- { USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */
+ /* AC8710, AC8710T */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
+ /* AC8700 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
+ /* MG880 */
+ { USB_DEVICE(0x19d2, 0xfffd) },
+ { USB_DEVICE(0x19d2, 0xfffc) },
+ { USB_DEVICE(0x19d2, 0xfffb) },
+ /* AC2726, AC8710_V3 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(0x19d2, 0xfff6) },
+ { USB_DEVICE(0x19d2, 0xfff7) },
+ { USB_DEVICE(0x19d2, 0xfff8) },
+ { USB_DEVICE(0x19d2, 0xfff9) },
+ { USB_DEVICE(0x19d2, 0xffee) },
+ /* AC2716, MC2716 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
+ /* AD3812 */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(0x19d2, 0xffec) },
{ USB_DEVICE(0x05C6, 0x3197) },
{ USB_DEVICE(0x05C6, 0x6000) },
+ { USB_DEVICE(0x05C6, 0x9008) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
#include "xfs_bmap_btree.h"
#include "xfs_inode.h"
#include "xfs_vnodeops.h"
+#include "xfs_sb.h"
+#include "xfs_mount.h"
#include "xfs_trace.h"
#include <linux/slab.h>
#include <linux/xattr.h>
*/
STATIC struct posix_acl *
-xfs_acl_from_disk(struct xfs_acl *aclp)
+xfs_acl_from_disk(
+ struct xfs_acl *aclp,
+ int max_entries)
{
struct posix_acl_entry *acl_e;
struct posix_acl *acl;
unsigned int count, i;
count = be32_to_cpu(aclp->acl_cnt);
- if (count > XFS_ACL_MAX_ENTRIES)
+ if (count > max_entries)
return ERR_PTR(-EFSCORRUPTED);
acl = posix_acl_alloc(count, GFP_KERNEL);
struct xfs_inode *ip = XFS_I(inode);
struct posix_acl *acl;
struct xfs_acl *xfs_acl;
- int len = sizeof(struct xfs_acl);
unsigned char *ea_name;
int error;
+ int len;
acl = get_cached_acl(inode, type);
if (acl != ACL_NOT_CACHED)
* If we have a cached ACLs value just return it, not need to
* go out to the disk.
*/
-
- xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
+ len = XFS_ACL_MAX_SIZE(ip->i_mount);
+ xfs_acl = kzalloc(len, GFP_KERNEL);
if (!xfs_acl)
return ERR_PTR(-ENOMEM);
goto out;
}
- acl = xfs_acl_from_disk(xfs_acl);
+ acl = xfs_acl_from_disk(xfs_acl, XFS_ACL_MAX_ENTRIES(ip->i_mount));
if (IS_ERR(acl))
goto out;
if (acl) {
struct xfs_acl *xfs_acl;
- int len;
+ int len = XFS_ACL_MAX_SIZE(ip->i_mount);
- xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
+ xfs_acl = kzalloc(len, GFP_KERNEL);
if (!xfs_acl)
return -ENOMEM;
xfs_acl_to_disk(xfs_acl, acl);
- len = sizeof(struct xfs_acl) -
- (sizeof(struct xfs_acl_entry) *
- (XFS_ACL_MAX_ENTRIES - acl->a_count));
+
+ /* subtract away the unused acl entries */
+ len -= sizeof(struct xfs_acl_entry) *
+ (XFS_ACL_MAX_ENTRIES(ip->i_mount) - acl->a_count);
error = -xfs_attr_set(ip, ea_name, (unsigned char *)xfs_acl,
len, ATTR_ROOT);
static int
xfs_acl_exists(struct inode *inode, unsigned char *name)
{
- int len = sizeof(struct xfs_acl);
+ int len = XFS_ACL_MAX_SIZE(XFS_M(inode->i_sb));
return (xfs_attr_get(XFS_I(inode), name, NULL, &len,
ATTR_ROOT|ATTR_KERNOVAL) == 0);
goto out_release;
error = -EINVAL;
- if (acl->a_count > XFS_ACL_MAX_ENTRIES)
+ if (acl->a_count > XFS_ACL_MAX_ENTRIES(XFS_M(inode->i_sb)))
goto out_release;
if (type == ACL_TYPE_ACCESS) {
struct posix_acl;
struct xfs_inode;
-#define XFS_ACL_MAX_ENTRIES 25
#define XFS_ACL_NOT_PRESENT (-1)
/* On-disk XFS access control list structure */
+struct xfs_acl_entry {
+ __be32 ae_tag;
+ __be32 ae_id;
+ __be16 ae_perm;
+ __be16 ae_pad; /* fill the implicit hole in the structure */
+};
+
struct xfs_acl {
- __be32 acl_cnt;
- struct xfs_acl_entry {
- __be32 ae_tag;
- __be32 ae_id;
- __be16 ae_perm;
- } acl_entry[XFS_ACL_MAX_ENTRIES];
+ __be32 acl_cnt;
+ struct xfs_acl_entry acl_entry[0];
};
+/*
+ * The number of ACL entries allowed is defined by the on-disk format.
+ * For v4 superblocks, that is limited to 25 entries. For v5 superblocks, it is
+ * limited only by the maximum size of the xattr that stores the information.
+ */
+#define XFS_ACL_MAX_ENTRIES(mp) \
+ (xfs_sb_version_hascrc(&mp->m_sb) \
+ ? (XATTR_SIZE_MAX - sizeof(struct xfs_acl)) / \
+ sizeof(struct xfs_acl_entry) \
+ : 25)
+
+#define XFS_ACL_MAX_SIZE(mp) \
+ (sizeof(struct xfs_acl) + \
+ sizeof(struct xfs_acl_entry) * XFS_ACL_MAX_ENTRIES((mp)))
+
/* On-disk XFS extended attribute names */
#define SGI_ACL_FILE (unsigned char *)"SGI_ACL_FILE"
#define SGI_ACL_DEFAULT (unsigned char *)"SGI_ACL_DEFAULT"
name_rmt = xfs_attr3_leaf_name_remote(leaf, i);
if (name_rmt->valueblk) {
lp->valueblk = be32_to_cpu(name_rmt->valueblk);
- lp->valuelen = XFS_B_TO_FSB(dp->i_mount,
+ lp->valuelen = xfs_attr3_rmt_blocks(dp->i_mount,
be32_to_cpu(name_rmt->valuelen));
lp++;
}
d->dd_diskdq.d_version = XFS_DQUOT_VERSION;
d->dd_diskdq.d_id = cpu_to_be32(curid);
d->dd_diskdq.d_flags = type;
- if (xfs_sb_version_hascrc(&mp->m_sb))
+ if (xfs_sb_version_hascrc(&mp->m_sb)) {
uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid);
+ xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk),
+ XFS_DQUOT_CRC_OFF);
+ }
}
xfs_trans_dquot_buf(tp, bp,
dqp->q_low_space[XFS_QLOWSP_5_PCNT] = space * 5;
}
-STATIC void
-xfs_dquot_buf_calc_crc(
- struct xfs_mount *mp,
- struct xfs_buf *bp)
-{
- struct xfs_dqblk *d = (struct xfs_dqblk *)bp->b_addr;
- int i;
-
- if (!xfs_sb_version_hascrc(&mp->m_sb))
- return;
-
- for (i = 0; i < mp->m_quotainfo->qi_dqperchunk; i++, d++) {
- xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk),
- offsetof(struct xfs_dqblk, dd_crc));
- }
-}
-
STATIC bool
xfs_dquot_buf_verify_crc(
struct xfs_mount *mp,
for (i = 0; i < ndquots; i++, d++) {
if (!xfs_verify_cksum((char *)d, sizeof(struct xfs_dqblk),
- offsetof(struct xfs_dqblk, dd_crc)))
+ XFS_DQUOT_CRC_OFF))
return false;
if (!uuid_equal(&d->dd_uuid, &mp->m_sb.sb_uuid))
return false;
}
-
return true;
}
}
}
+/*
+ * we don't calculate the CRC here as that is done when the dquot is flushed to
+ * the buffer after the update is done. This ensures that the dquot in the
+ * buffer always has an up-to-date CRC value.
+ */
void
xfs_dquot_buf_write_verify(
struct xfs_buf *bp)
xfs_buf_ioerror(bp, EFSCORRUPTED);
return;
}
- xfs_dquot_buf_calc_crc(mp, bp);
}
const struct xfs_buf_ops xfs_dquot_buf_ops = {
* copy the lsn into the on-disk dquot now while we have the in memory
* dquot here. This can't be done later in the write verifier as we
* can't get access to the log item at that point in time.
+ *
+ * We also calculate the CRC here so that the on-disk dquot in the
+ * buffer always has a valid CRC. This ensures there is no possibility
+ * of a dquot without an up-to-date CRC getting to disk.
*/
if (xfs_sb_version_hascrc(&mp->m_sb)) {
struct xfs_dqblk *dqb = (struct xfs_dqblk *)ddqp;
dqb->dd_lsn = cpu_to_be64(dqp->q_logitem.qli_item.li_lsn);
+ xfs_update_cksum((char *)dqb, sizeof(struct xfs_dqblk),
+ XFS_DQUOT_CRC_OFF);
}
/*
dip->di_next_unlinked = agi->agi_unlinked[bucket_index];
offset = ip->i_imap.im_boffset +
offsetof(xfs_dinode_t, di_next_unlinked);
+
+ /* need to recalc the inode CRC if appropriate */
+ xfs_dinode_calc_crc(mp, dip);
+
xfs_trans_inode_buf(tp, ibp);
xfs_trans_log_buf(tp, ibp, offset,
(offset + sizeof(xfs_agino_t) - 1));
dip->di_next_unlinked = cpu_to_be32(NULLAGINO);
offset = ip->i_imap.im_boffset +
offsetof(xfs_dinode_t, di_next_unlinked);
+
+ /* need to recalc the inode CRC if appropriate */
+ xfs_dinode_calc_crc(mp, dip);
+
xfs_trans_inode_buf(tp, ibp);
xfs_trans_log_buf(tp, ibp, offset,
(offset + sizeof(xfs_agino_t) - 1));
dip->di_next_unlinked = cpu_to_be32(NULLAGINO);
offset = ip->i_imap.im_boffset +
offsetof(xfs_dinode_t, di_next_unlinked);
+
+ /* need to recalc the inode CRC if appropriate */
+ xfs_dinode_calc_crc(mp, dip);
+
xfs_trans_inode_buf(tp, ibp);
xfs_trans_log_buf(tp, ibp, offset,
(offset + sizeof(xfs_agino_t) - 1));
last_dip->di_next_unlinked = cpu_to_be32(next_agino);
ASSERT(next_agino != 0);
offset = last_offset + offsetof(xfs_dinode_t, di_next_unlinked);
+
+ /* need to recalc the inode CRC if appropriate */
+ xfs_dinode_calc_crc(mp, last_dip);
+
xfs_trans_inode_buf(tp, last_ibp);
xfs_trans_log_buf(tp, last_ibp, offset,
(offset + sizeof(xfs_agino_t) - 1));
}
/*
- * Sort the log items in the transaction. Cancelled buffers need
- * to be put first so they are processed before any items that might
- * modify the buffers. If they are cancelled, then the modifications
- * don't need to be replayed.
+ * Sort the log items in the transaction.
+ *
+ * The ordering constraints are defined by the inode allocation and unlink
+ * behaviour. The rules are:
+ *
+ * 1. Every item is only logged once in a given transaction. Hence it
+ * represents the last logged state of the item. Hence ordering is
+ * dependent on the order in which operations need to be performed so
+ * required initial conditions are always met.
+ *
+ * 2. Cancelled buffers are recorded in pass 1 in a separate table and
+ * there's nothing to replay from them so we can simply cull them
+ * from the transaction. However, we can't do that until after we've
+ * replayed all the other items because they may be dependent on the
+ * cancelled buffer and replaying the cancelled buffer can remove it
+ * form the cancelled buffer table. Hence they have tobe done last.
+ *
+ * 3. Inode allocation buffers must be replayed before inode items that
+ * read the buffer and replay changes into it.
+ *
+ * 4. Inode unlink buffers must be replayed after inode items are replayed.
+ * This ensures that inodes are completely flushed to the inode buffer
+ * in a "free" state before we remove the unlinked inode list pointer.
+ *
+ * Hence the ordering needs to be inode allocation buffers first, inode items
+ * second, inode unlink buffers third and cancelled buffers last.
+ *
+ * But there's a problem with that - we can't tell an inode allocation buffer
+ * apart from a regular buffer, so we can't separate them. We can, however,
+ * tell an inode unlink buffer from the others, and so we can separate them out
+ * from all the other buffers and move them to last.
+ *
+ * Hence, 4 lists, in order from head to tail:
+ * - buffer_list for all buffers except cancelled/inode unlink buffers
+ * - item_list for all non-buffer items
+ * - inode_buffer_list for inode unlink buffers
+ * - cancel_list for the cancelled buffers
*/
STATIC int
xlog_recover_reorder_trans(
{
xlog_recover_item_t *item, *n;
LIST_HEAD(sort_list);
+ LIST_HEAD(cancel_list);
+ LIST_HEAD(buffer_list);
+ LIST_HEAD(inode_buffer_list);
+ LIST_HEAD(inode_list);
list_splice_init(&trans->r_itemq, &sort_list);
list_for_each_entry_safe(item, n, &sort_list, ri_list) {
switch (ITEM_TYPE(item)) {
case XFS_LI_BUF:
- if (!(buf_f->blf_flags & XFS_BLF_CANCEL)) {
+ if (buf_f->blf_flags & XFS_BLF_CANCEL) {
trace_xfs_log_recover_item_reorder_head(log,
trans, item, pass);
- list_move(&item->ri_list, &trans->r_itemq);
+ list_move(&item->ri_list, &cancel_list);
+ break;
+ }
+ if (buf_f->blf_flags & XFS_BLF_INODE_BUF) {
+ list_move(&item->ri_list, &inode_buffer_list);
break;
}
+ list_move_tail(&item->ri_list, &buffer_list);
+ break;
case XFS_LI_INODE:
case XFS_LI_DQUOT:
case XFS_LI_QUOTAOFF:
case XFS_LI_EFI:
trace_xfs_log_recover_item_reorder_tail(log,
trans, item, pass);
- list_move_tail(&item->ri_list, &trans->r_itemq);
+ list_move_tail(&item->ri_list, &inode_list);
break;
default:
xfs_warn(log->l_mp,
}
}
ASSERT(list_empty(&sort_list));
+ if (!list_empty(&buffer_list))
+ list_splice(&buffer_list, &trans->r_itemq);
+ if (!list_empty(&inode_list))
+ list_splice_tail(&inode_list, &trans->r_itemq);
+ if (!list_empty(&inode_buffer_list))
+ list_splice_tail(&inode_buffer_list, &trans->r_itemq);
+ if (!list_empty(&cancel_list))
+ list_splice_tail(&cancel_list, &trans->r_itemq);
return 0;
}
buffer_nextp = (xfs_agino_t *)xfs_buf_offset(bp,
next_unlinked_offset);
*buffer_nextp = *logged_nextp;
+
+ /*
+ * If necessary, recalculate the CRC in the on-disk inode. We
+ * have to leave the inode in a consistent state for whoever
+ * reads it next....
+ */
+ xfs_dinode_calc_crc(mp, (struct xfs_dinode *)
+ xfs_buf_offset(bp, i * mp->m_sb.sb_inodesize));
+
}
return 0;
d->dd_diskdq.d_flags = type;
d->dd_diskdq.d_id = cpu_to_be32(id);
+ if (xfs_sb_version_hascrc(&mp->m_sb)) {
+ uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid);
+ xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk),
+ XFS_DQUOT_CRC_OFF);
+ }
+
return errs;
}
}
memcpy(ddq, recddq, item->ri_buf[1].i_len);
+ if (xfs_sb_version_hascrc(&mp->m_sb)) {
+ xfs_update_cksum((char *)ddq, sizeof(struct xfs_dqblk),
+ XFS_DQUOT_CRC_OFF);
+ }
ASSERT(dq_f->qlf_size == 2);
ASSERT(bp->b_target->bt_mount == mp);
#include "xfs_qm.h"
#include "xfs_trace.h"
#include "xfs_icache.h"
+#include "xfs_cksum.h"
/*
* The global quota manager. There is only one of these for the entire
xfs_dqid_t id,
uint type)
{
- xfs_disk_dquot_t *ddq;
+ struct xfs_dqblk *dqb;
int j;
trace_xfs_reset_dqcounts(bp, _RET_IP_);
do_div(j, sizeof(xfs_dqblk_t));
ASSERT(mp->m_quotainfo->qi_dqperchunk == j);
#endif
- ddq = bp->b_addr;
+ dqb = bp->b_addr;
for (j = 0; j < mp->m_quotainfo->qi_dqperchunk; j++) {
+ struct xfs_disk_dquot *ddq;
+
+ ddq = (struct xfs_disk_dquot *)&dqb[j];
+
/*
* Do a sanity check, and if needed, repair the dqblk. Don't
* output any warnings because it's perfectly possible to
ddq->d_bwarns = 0;
ddq->d_iwarns = 0;
ddq->d_rtbwarns = 0;
- ddq = (xfs_disk_dquot_t *) ((xfs_dqblk_t *)ddq + 1);
+
+ if (xfs_sb_version_hascrc(&mp->m_sb)) {
+ xfs_update_cksum((char *)&dqb[j],
+ sizeof(struct xfs_dqblk),
+ XFS_DQUOT_CRC_OFF);
+ }
}
}
XFS_FSB_TO_DADDR(mp, bno),
mp->m_quotainfo->qi_dqchunklen, 0, &bp,
&xfs_dquot_buf_ops);
- if (error)
- break;
/*
- * XXX(hch): need to figure out if it makes sense to validate
- * the CRC here.
+ * CRC and validation errors will return a EFSCORRUPTED here. If
+ * this occurs, re-read without CRC validation so that we can
+ * repair the damage via xfs_qm_reset_dqcounts(). This process
+ * will leave a trace in the log indicating corruption has
+ * been detected.
*/
+ if (error == EFSCORRUPTED) {
+ error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp,
+ XFS_FSB_TO_DADDR(mp, bno),
+ mp->m_quotainfo->qi_dqchunklen, 0, &bp,
+ NULL);
+ }
+
+ if (error)
+ break;
+
xfs_qm_reset_dqcounts(mp, bp, firstid, type);
xfs_buf_delwri_queue(bp, buffer_list);
xfs_buf_relse(bp);
- /*
- * goto the next block.
- */
+
+ /* goto the next block. */
bno++;
firstid += mp->m_quotainfo->qi_dqperchunk;
}
uuid_t dd_uuid; /* location information */
} xfs_dqblk_t;
+#define XFS_DQUOT_CRC_OFF offsetof(struct xfs_dqblk, dd_crc)
+
/*
* flags for q_flags field in the dquot.
*/
}
/*
+ * V5 filesystems always use attr2 format for attributes.
+ */
+ if (xfs_sb_version_hascrc(&mp->m_sb) &&
+ (mp->m_flags & XFS_MOUNT_NOATTR2)) {
+ xfs_warn(mp,
+"Cannot mount a V5 filesystem as %s. %s is always enabled for V5 filesystems.",
+ MNTOPT_NOATTR2, MNTOPT_ATTR2);
+ return XFS_ERROR(EINVAL);
+ }
+
+ /*
* mkfs'ed attr2 will turn on attr2 mount unless explicitly
* told by noattr2 to turn it off
*/
unsigned long start;
unsigned long end;
unsigned int need_flush : 1, /* Did free PTEs */
- fast_mode : 1; /* No batching */
-
/* we are in the middle of an operation to clear
* a full mm and can make some optimizations */
- unsigned int fullmm : 1,
+ fullmm : 1,
/* we have performed an operation which
* requires a complete flush of the tlb */
need_flush_all : 1;
#define HAVE_GENERIC_MMU_GATHER
-static inline int tlb_fast_mode(struct mmu_gather *tlb)
-{
-#ifdef CONFIG_SMP
- return tlb->fast_mode;
-#else
- /*
- * For UP we don't need to worry about TLB flush
- * and page free order so much..
- */
- return 1;
-#endif
-}
-
void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm);
void tlb_flush_mmu(struct mmu_gather *tlb);
void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start,
struct timespec;
+/* The __sys_...msg variants allow MSG_CMSG_COMPAT */
+extern long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags);
+extern long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
unsigned int flags, struct timespec *timeout);
extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,
tlb->start = -1UL;
tlb->end = 0;
tlb->need_flush = 0;
- tlb->fast_mode = (num_possible_cpus() == 1);
tlb->local.next = NULL;
tlb->local.nr = 0;
tlb->local.max = ARRAY_SIZE(tlb->__pages);
tlb_table_flush(tlb);
#endif
- if (tlb_fast_mode(tlb))
- return;
-
for (batch = &tlb->local; batch; batch = batch->next) {
free_pages_and_swap_cache(batch->pages, batch->nr);
batch->nr = 0;
VM_BUG_ON(!tlb->need_flush);
- if (tlb_fast_mode(tlb)) {
- free_page_and_swap_cache(page);
- return 1; /* avoid calling tlb_flush_mmu() */
- }
-
batch = tlb->active;
batch->pages[batch->nr++] = page;
if (batch->nr == batch->max) {
asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags)
{
- return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
+ if (flags & MSG_CMSG_COMPAT)
+ return -EINVAL;
+ return __sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
}
asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg,
unsigned int vlen, unsigned int flags)
{
+ if (flags & MSG_CMSG_COMPAT)
+ return -EINVAL;
return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT);
}
asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags)
{
- return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
+ if (flags & MSG_CMSG_COMPAT)
+ return -EINVAL;
+ return __sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
}
asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len, unsigned int flags)
int datagrams;
struct timespec ktspec;
+ if (flags & MSG_CMSG_COMPAT)
+ return -EINVAL;
+
if (COMPAT_USE_64BIT_TIME)
return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
flags | MSG_CMSG_COMPAT,
unsigned int name_len;
};
-static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
+static int ___sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
struct msghdr *msg_sys, unsigned int flags,
struct used_address *used_address)
{
* BSD sendmsg interface
*/
-SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags)
+long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
{
int fput_needed, err;
struct msghdr msg_sys;
struct socket *sock;
- if (flags & MSG_CMSG_COMPAT)
- return -EINVAL;
-
sock = sockfd_lookup_light(fd, &err, &fput_needed);
if (!sock)
goto out;
- err = __sys_sendmsg(sock, msg, &msg_sys, flags, NULL);
+ err = ___sys_sendmsg(sock, msg, &msg_sys, flags, NULL);
fput_light(sock->file, fput_needed);
out:
return err;
}
+SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags)
+{
+ if (flags & MSG_CMSG_COMPAT)
+ return -EINVAL;
+ return __sys_sendmsg(fd, msg, flags);
+}
+
/*
* Linux sendmmsg interface
*/
while (datagrams < vlen) {
if (MSG_CMSG_COMPAT & flags) {
- err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry,
- &msg_sys, flags, &used_address);
+ err = ___sys_sendmsg(sock, (struct msghdr __user *)compat_entry,
+ &msg_sys, flags, &used_address);
if (err < 0)
break;
err = __put_user(err, &compat_entry->msg_len);
++compat_entry;
} else {
- err = __sys_sendmsg(sock, (struct msghdr __user *)entry,
- &msg_sys, flags, &used_address);
+ err = ___sys_sendmsg(sock,
+ (struct msghdr __user *)entry,
+ &msg_sys, flags, &used_address);
if (err < 0)
break;
err = put_user(err, &entry->msg_len);
return __sys_sendmmsg(fd, mmsg, vlen, flags);
}
-static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
+static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
struct msghdr *msg_sys, unsigned int flags, int nosec)
{
struct compat_msghdr __user *msg_compat =
* BSD recvmsg interface
*/
-SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
- unsigned int, flags)
+long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags)
{
int fput_needed, err;
struct msghdr msg_sys;
struct socket *sock;
- if (flags & MSG_CMSG_COMPAT)
- return -EINVAL;
-
sock = sockfd_lookup_light(fd, &err, &fput_needed);
if (!sock)
goto out;
- err = __sys_recvmsg(sock, msg, &msg_sys, flags, 0);
+ err = ___sys_recvmsg(sock, msg, &msg_sys, flags, 0);
fput_light(sock->file, fput_needed);
out:
return err;
}
+SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
+ unsigned int, flags)
+{
+ if (flags & MSG_CMSG_COMPAT)
+ return -EINVAL;
+ return __sys_recvmsg(fd, msg, flags);
+}
+
/*
* Linux recvmmsg interface
*/
* No need to ask LSM for more than the first datagram.
*/
if (MSG_CMSG_COMPAT & flags) {
- err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry,
- &msg_sys, flags & ~MSG_WAITFORONE,
- datagrams);
+ err = ___sys_recvmsg(sock, (struct msghdr __user *)compat_entry,
+ &msg_sys, flags & ~MSG_WAITFORONE,
+ datagrams);
if (err < 0)
break;
err = __put_user(err, &compat_entry->msg_len);
++compat_entry;
} else {
- err = __sys_recvmsg(sock, (struct msghdr __user *)entry,
- &msg_sys, flags & ~MSG_WAITFORONE,
- datagrams);
+ err = ___sys_recvmsg(sock,
+ (struct msghdr __user *)entry,
+ &msg_sys, flags & ~MSG_WAITFORONE,
+ datagrams);
if (err < 0)
break;
err = put_user(err, &entry->msg_len);
(int __user *)a[4]);
break;
case SYS_SENDMSG:
- if (a[2] & MSG_CMSG_COMPAT) {
- err = -EINVAL;
- break;
- }
err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]);
break;
case SYS_SENDMMSG:
- if (a[3] & MSG_CMSG_COMPAT) {
- err = -EINVAL;
- break;
- }
err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]);
break;
case SYS_RECVMSG:
- if (a[2] & MSG_CMSG_COMPAT) {
- err = -EINVAL;
- break;
- }
err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
break;
case SYS_RECVMMSG:
- if (a[3] & MSG_CMSG_COMPAT) {
- err = -EINVAL;
- break;
- }
err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3],
(struct timespec __user *)a[4]);
break;
quiet_cmd_dtc = DTC $@
cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
$(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
- -i $(srctree)/arch/$(SRCARCH)/boot/dts $(DTC_FLAGS) \
+ -i $(dir $<) $(DTC_FLAGS) \
-d $(depfile).dtc $(dtc-tmp) ; \
cat $(depfile).pre $(depfile).dtc > $(depfile)
;;
--refresh)
;;
- --*-after)
+ --*-after|-E|-D|-M)
checkarg "$1"
A=$ARG
checkarg "$2"
}
}
- if (i < max_choice ||
- key == KEY_UP || key == KEY_DOWN ||
- key == '-' || key == '+' ||
- key == KEY_PPAGE || key == KEY_NPAGE) {
+ if (item_count() != 0 &&
+ (i < max_choice ||
+ key == KEY_UP || key == KEY_DOWN ||
+ key == '-' || key == '+' ||
+ key == KEY_PPAGE || key == KEY_NPAGE)) {
/* Remove highligt of current item */
print_item(scroll + choice, choice, FALSE);
active_menu, &s_scroll);
if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL)
break;
- if (!item_activate_selected())
- continue;
- if (!item_tag())
- continue;
-
+ if (item_count() != 0) {
+ if (!item_activate_selected())
+ continue;
+ if (!item_tag())
+ continue;
+ }
submenu = item_data();
active_menu = item_data();
if (submenu)
struct menu *menu = current_entry;
while ((menu = menu->parent) != NULL) {
+ struct expr *dup_expr;
+
if (!menu->visibility)
continue;
+ /*
+ * Do not add a reference to the
+ * menu's visibility expression but
+ * use a copy of it. Otherwise the
+ * expression reduction functions
+ * will modify expressions that have
+ * multiple references which can
+ * cause unwanted side effects.
+ */
+ dup_expr = expr_copy(menu->visibility);
+
prop->visible.expr
= expr_alloc_and(prop->visible.expr,
- menu->visibility);
+ dup_expr);
}
}