powerpc/mpc85xx: Display a warning for unsupported DDR data rates

If DDR initialziation uses a speed table and the speed is not matched,
print a warning message instead of silently ignoring.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c
index f2b716d..a184592 100644 (file)
--- a/board/freescale/corenet_ds/ddr.c
+++ b/board/freescale/corenet_ds/ddr.c
@@ -192,10 +192,16 @@ void fsl_ddr_board_options(memctl_options_t *popts,
                        popts->clk_adjust = pbsp->clk_adjust;
                        popts->wrlvl_start = pbsp->wrlvl_start;
                        popts->twoT_en = pbsp->force_2T;
+                       break;
                }
                pbsp++;
        }
 
+       if (i == num_params) {
+               printf("Warning: board specific timing not found "
+                       "for data rate %lu MT/s!\n", ddr_freq);
+       }
+
        /*
         * Factors to consider for half-strength driver enable:
         *      - number of DIMMs installed

diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c
index ab471af..adcbd58 100644 (file)
--- a/board/freescale/mpc8572ds/ddr.c
+++ b/board/freescale/mpc8572ds/ddr.c
@@ -104,7 +104,6 @@ void fsl_ddr_board_options(memctl_options_t *popts,
        u32 num_params;
        u32 i;
        ulong ddr_freq;
-       int matched = 0;
 
        if (!pdimm->n_ranks)
                return;
@@ -151,14 +150,15 @@ void fsl_ddr_board_options(memctl_options_t *popts,
                        popts->cpo_override = pbsp->cpo;
                        popts->write_data_delay = pbsp->write_data_delay;
                        popts->twoT_en = pbsp->force_2T;
-                       matched = 1;
                        break;
                }
                pbsp++;
        }
 
-       if (!matched)
-               printf("Warning: board specific timing not found!\n");
+       if (i == num_params) {
+               printf("Warning: board specific timing not found "
+                       "for data rate %lu MT/s!\n", ddr_freq);
+       }
 
        /*
         * Factors to consider for half-strength driver enable:

diff --git a/board/freescale/mpc8641hpcn/ddr.c b/board/freescale/mpc8641hpcn/ddr.c
index bd0b299..4f2e853 100644 (file)
--- a/board/freescale/mpc8641hpcn/ddr.c
+++ b/board/freescale/mpc8641hpcn/ddr.c
@@ -127,6 +127,11 @@ void fsl_ddr_board_options(memctl_options_t *popts,
                }
        }
 
+       if (i == num_params) {
+               printf("Warning: board specific timing not found "
+                       "for data rate %lu MT/s!\n", ddr_freq);
+       }
+
        /* 2T timing enable */
        popts->twoT_en = 1;
 }

diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c
index 9bf7d2f..926fd19 100644 (file)
--- a/board/freescale/p2020ds/ddr.c
+++ b/board/freescale/p2020ds/ddr.c
@@ -83,10 +83,16 @@ void fsl_ddr_board_options(memctl_options_t *popts,
                        popts->cpo_override = pbsp->cpo;
                        popts->write_data_delay = pbsp->write_data_delay;
                        popts->twoT_en = pbsp->force_2T;
+                       break;
                }
                pbsp++;
        }
 
+       if (i == num_params) {
+               printf("Warning: board specific timing not found "
+                       "for data rate %lu MT/s!\n", ddr_freq);
+       }
+
        /*
         * Factors to consider for half-strength driver enable:
         *      - number of DIMMs installed

diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c
index 3b6e08b..8031a34 100644 (file)
--- a/board/xes/xpedite550x/ddr.c
+++ b/board/xes/xpedite550x/ddr.c
@@ -125,10 +125,16 @@ void fsl_ddr_board_options(memctl_options_t *popts,
                        popts->clk_adjust = pbsp->clk_adjust;
                        popts->cpo_override = pbsp->cpo;
                        popts->twoT_en = 0;
+                       break;
                }
                pbsp++;
        }
 
+       if (i == num_params) {
+               printf("Warning: board specific timing not found "
+               "for data rate %lu MT/s!\n", ddr_freq);
+       }
+
        /*
         * Factors to consider for half-strength driver enable:
         *      - number of DIMMs installed