#define I8254_CTRL 3
struct das08_private_struct {
- unsigned int do_mux_bits; /* bits for do/mux register on boards without seperate do register */
+ unsigned int do_mux_bits; /* bits for do/mux register on boards without separate do register */
unsigned int do_bits; /* bits for do register on boards with register dedicated to digital out only */
const unsigned int *pg_gainlist;
struct pci_dev *pdev; /* struct for pci-das08 */
ctrl->vfeImaskLocal.camifEpoch2Irq = 1;
}
- /* save the content to program CAMIF_CONFIG seperately. */
+ /* save the content to program CAMIF_CONFIG separately. */
ctrl->vfeCamifConfigLocal.camifCfgFromCmd = in->camifConfig;
/* EFS_Config */
}
EXPORT_SYMBOL_GPL(oslec_update);
-/* This function is seperated from the echo canceller is it is usually called
+/* This function is separated from the echo canceller is it is usually called
as part of the tx process. See rx HP (DC blocking) filter above, it's
the same design.
u8 BSSID[6];
u8 RegClass; /* Regulatory Class */
u16 Channel;
- unsigned long CDCounter; /* Maintain a seperate count down counter for each Event A. */
+ unsigned long CDCounter; /* Maintain a separate count down counter for each Event A. */
};
/* 20/40 trigger event table */
spinlock_t bw_spinlock;
spinlock_t reorder_spinlock;
- // for HT operation rate set. we use this one for HT data rate to seperate different descriptors
+ // for HT operation rate set. we use this one for HT data rate to separate different descriptors
//the way fill this is the same as in the IE
u8 Regdot11HTOperationalRateSet[16]; //use RATR format
u8 dot11HTOperationalRateSet[16]; //use RATR format
spinlock_t bw_spinlock;
spinlock_t reorder_spinlock;
- // for HT operation rate set. we use this one for HT data rate to seperate different descriptors
+ // for HT operation rate set. we use this one for HT data rate to separate different descriptors
//the way fill this is the same as in the IE
u8 Regdot11HTOperationalRateSet[16]; //use RATR format
u8 dot11HTOperationalRateSet[16]; //use RATR format
case RT_OP_MODE_IBSS:
btMsr |= MSR_LINK_ADHOC;
- // led link set seperate
+ // led link set separate
break;
case RT_OP_MODE_AP:
case RT_OP_MODE_IBSS:
btMsr |= MSR_LINK_ADHOC;
- // led link set seperate
+ // led link set separate
break;
case RT_OP_MODE_AP:
case RT_OP_MODE_IBSS:
btMsr |= MSR_ADHOC;
- // led link set seperate
+ // led link set separate
break;
case RT_OP_MODE_AP:
spinlock_t reorder_spinlock;
/*
* for HT operation rate set, we use this one for HT data rate to
- * seperate different descriptors the way fill this is the same as
+ * separate different descriptors the way fill this is the same as
* in the IE
*/
u8 Regdot11HTOperationalRateSet[16]; /* use RATR format */
//
// 1. Read PHY_REG.TXT BB INIT!!
- // We will seperate as 1T1R/1T2R/1T2R_GREEN/2T2R
+ // We will separate as 1T1R/1T2R/1T2R_GREEN/2T2R
//
if (priv->rf_type == RF_1T2R || priv->rf_type == RF_2T2R ||
priv->rf_type == RF_1T1R ||priv->rf_type == RF_2T2R_GREEN)
spinlock_t reorder_spinlock;
/* for HT operation rate set. we use this one for HT data rate to
- * seperate different descriptors
+ * separate different descriptors
* the way fill this is the same as in the IE
*/
u8 Regdot11HTOperationalRateSet[16]; /* use RATR format */
spinlock_t bw_spinlock;
spinlock_t reorder_spinlock;
- // for HT operation rate set. we use this one for HT data rate to seperate different descriptors
+ // for HT operation rate set. we use this one for HT data rate to separate different descriptors
//the way fill this is the same as in the IE
u8 Regdot11HTOperationalRateSet[16]; //use RATR format
u8 dot11HTOperationalRateSet[16]; //use RATR format
the functions to interface to the Network Interface Card (NIC). The HCF
provides for all WaveLAN NIC types one standard interface to the MSF.
This I/F is called the Wireless Connection Interface (WCI) and is the
- subject of a seperate document (025726).
+ subject of a separate document (025726).
The HCF directory contains firmware images to allow the card to operate in
either station (STA) or Access Point (AP) mode. In the build process, the
pLtv->u.u16[0] = CNV_INT_TO_LITTLE( pLtv->u.u16[0] );
break;
/* CFG_CNF_OWN_SSID currently same as CNF_DESIRED_SSID. Do we
- need seperate storage for this? */
+ need separate storage for this? */
//case CFG_CNF_OWN_SSID:
case CFG_CNF_OWN_ATIM_WINDOW:
lp->atimWindow = pLtv->u.u16[0];
MLME-MICHAELMICFAILURE.indication(keyid=# broadcast/unicast addr=addr2)
*/
- /* NOTE: Format of MAC address (using colons to seperate bytes) may cause
+ /* NOTE: Format of MAC address (using colons to separate bytes) may cause
a problem in future versions of the supplicant, if they ever
actually parse these parameters */
#if DBG
projects / profile / ivi / kernel-adaptation-intel-automotive.git / commitdiff