0x20 0xfcba0d10 (Magic cookie) AFTR
0x24 exynos_cpu_resume_ns AFTR
0x28 + 4*cpu 0x8 (Magic cookie, Exynos3250) AFTR
+0x28 0x0 or last value during resume (Exynos542x) System suspend
2. Secure mode
Required root node property:
compatible: "amlogic,a113d", "amlogic,meson-axg";
+Boards with the Amlogic Meson G12A S905D2 SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,g12a";
+
Board compatible values (alphabetically, grouped by SoC):
- "geniatech,atv1200" (Meson6)
- "minix,neo-x8" (Meson8)
+ - "endless,ec100" (Meson8b)
- "hardkernel,odroid-c1" (Meson8b)
- "tronfy,mxq" (Meson8b)
- "amlogic,s400" (Meson axg a113d)
+ - "amlogic,u200" (Meson g12a s905d2)
+
Amlogic Meson Firmware registers Interface
------------------------------------------
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+Raspberry Pi Compute Module 3
+Required root node properties:
+compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+
+Raspberry Pi Compute Module 3 Lite
+Required root node properties:
+compatible = "raspberrypi,3-compute-module-lite", "brcm,bcm2837";
+
Raspberry Pi Zero
Required root node properties:
compatible = "raspberrypi,model-zero", "brcm,bcm2835";
Required root node properties:
- compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+i.MX6 Quad Plus SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
+
+i.MX6 Quad Plus SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6qp-sabreauto", "fsl,imx6qp";
+
+i.MX6 DualLite SABRE Smart Device Board
+Required root node properties:
+ - compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+
+i.MX6 DualLite/Solo SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
+
+i.MX6 SoloLite EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6sl-evk", "fsl,imx6sl";
+
+i.MX6 UltraLite 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+i.MX6 UltraLiteLite 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
+
+i.MX6 ULZ 14x14 EVK Board
+Required root node properties:
+ - compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+i.MX6 SoloX SDB Board
+Required root node properties:
+ - compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
+
+i.MX6 SoloX Sabre Auto Board
+Required root node properties:
+ - compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
+
+i.MX7 SabreSD Board
+Required root node properties:
+ - compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
Generic i.MX boards
-------------------
Required root node properties:
- compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
+Hi3670 SoC
+Required root node properties:
+ - compatible = "hisilicon,hi3670";
+
+HiKey970 Board
+Required root node properties:
+ - compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
Hi3798cv200 SoC
Required root node properties:
- compatible = "hisilicon,hi3798cv200";
- "mediatek,mt2712-apmixedsys", "syscon"
- "mediatek,mt6797-apmixedsys"
- "mediatek,mt7622-apmixedsys"
+ - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
- "mediatek,mt8135-apmixedsys"
- "mediatek,mt8173-apmixedsys"
- #clock-cells: Must be 1
- compatible: Should be one of:
- "mediatek,mt2701-audsys", "syscon"
- "mediatek,mt7622-audsys", "syscon"
+ - "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", "syscon"
- #clock-cells: Must be 1
The AUDSYS controller uses the common clk binding from
- compatible: Should be:
- "mediatek,mt2701-bdpsys", "syscon"
- "mediatek,mt2712-bdpsys", "syscon"
+ - "mediatek,mt7623-bdpsys", "mediatek,mt2701-bdpsys", "syscon"
- #clock-cells: Must be 1
The bdpsys controller uses the common clk binding from
- compatible: Should be:
- "mediatek,mt2701-ethsys", "syscon"
- "mediatek,mt7622-ethsys", "syscon"
+ - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
- #clock-cells: Must be 1
- #reset-cells: Must be 1
- compatible: Should be:
- "mediatek,mt2701-hifsys", "syscon"
- "mediatek,mt7622-hifsys", "syscon"
+ - "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", "syscon"
- #clock-cells: Must be 1
The hifsys controller uses the common clk binding from
- "mediatek,mt2701-imgsys", "syscon"
- "mediatek,mt2712-imgsys", "syscon"
- "mediatek,mt6797-imgsys", "syscon"
+ - "mediatek,mt7623-imgsys", "mediatek,mt2701-imgsys", "syscon"
- "mediatek,mt8173-imgsys", "syscon"
- #clock-cells: Must be 1
- "mediatek,mt2712-infracfg", "syscon"
- "mediatek,mt6797-infracfg", "syscon"
- "mediatek,mt7622-infracfg", "syscon"
+ - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
- "mediatek,mt8135-infracfg", "syscon"
- "mediatek,mt8173-infracfg", "syscon"
- #clock-cells: Must be 1
- "mediatek,mt2701-mmsys", "syscon"
- "mediatek,mt2712-mmsys", "syscon"
- "mediatek,mt6797-mmsys", "syscon"
+ - "mediatek,mt7623-mmsys", "mediatek,mt2701-mmsys", "syscon"
- "mediatek,mt8173-mmsys", "syscon"
- #clock-cells: Must be 1
- "mediatek,mt2701-pericfg", "syscon"
- "mediatek,mt2712-pericfg", "syscon"
- "mediatek,mt7622-pericfg", "syscon"
+ - "mediatek,mt7623-pericfg", "mediatek,mt2701-pericfg", "syscon"
- "mediatek,mt8135-pericfg", "syscon"
- "mediatek,mt8173-pericfg", "syscon"
- #clock-cells: Must be 1
- "mediatek,mt2712-topckgen", "syscon"
- "mediatek,mt6797-topckgen"
- "mediatek,mt7622-topckgen"
+ - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
- "mediatek,mt8135-topckgen"
- "mediatek,mt8173-topckgen"
- #clock-cells: Must be 1
- "mediatek,mt2701-vdecsys", "syscon"
- "mediatek,mt2712-vdecsys", "syscon"
- "mediatek,mt6797-vdecsys", "syscon"
+ - "mediatek,mt7623-vdecsys", "mediatek,mt2701-vdecsys", "syscon"
- "mediatek,mt8173-vdecsys", "syscon"
- #clock-cells: Must be 1
Required root node properties:
- compatible = "vamrs,ficus", "rockchip,rk3399";
+- 96boards RK3399 Rock960 (ROCK960 Consumer Edition)
+ Required root node properties:
+ - compatible = "vamrs,rock960", "rockchip,rk3399";
+
- Amarula Vyasa RK3288 board
Required root node properties:
- compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
Required root node properties:
- compatible = "asus,rk3288-tinker", "rockchip,rk3288";
+- Asus Tinker board S
+ Required root node properties:
+ - compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+
- Kylin RK3036 board:
Required root node properties:
- compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
Required root node properties:
- compatible = "firefly,roc-rk3328-cc", "rockchip,rk3328";
+- Firefly ROC-RK3399-PC board:
+ Required root node properties:
+ - compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
- ChipSPARK PopMetal-RK3288 board:
Required root node properties:
- compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288";
Required root node properties:
- compatible = "pine64,rock64", "rockchip,rk3328";
+- Pine64 RockPro64 board:
+ Required root node properties:
+ - compatible = "pine64,rockpro64", "rockchip,rk3399";
+
- Rockchip PX3 Evaluation board:
Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
Required root node properties:
- compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+- Rockchip PX30 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,px30-evb", "rockchip,px30";
+
- Rockchip RV1108 Evaluation board
Required root node properties:
- compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
Example:
-scu@a04100000 {
+scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
compatible = "renesas,emev2"
- RZ/A1H (R7S72100)
compatible = "renesas,r7s72100"
+ - RZ/A2 (R7S9210)
+ compatible = "renesas,r7s9210"
- SH-Mobile AG5 (R8A73A00/SH73A0)
compatible = "renesas,sh73a0"
- R-Mobile APE6 (R8A73A40)
compatible = "renesas,r8a7745"
- RZ/G1C (R8A77470)
compatible = "renesas,r8a77470"
+ - RZ/G2M (R8A774A1)
+ compatible = "renesas,r8a774a1"
+ - RZ/G2E (RA8774C0)
+ compatible = "renesas,r8a774c0"
- R-Car M1A (R8A77781)
compatible = "renesas,r8a7778"
- R-Car H1 (R8A77790)
compatible = "renesas,lager", "renesas,r8a7790"
- M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0))
compatible = "renesas,m3ulcb", "renesas,r8a7796"
+ - M3NULCB (R-Car Starter Kit Pro, RTP0RC77965SKBX010SA00 (M3-N ES1.1))
+ compatible = "renesas,m3nulcb", "renesas,r8a77965"
- Marzen (R0P7779A00010S)
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
compatible = "renesas,wheat", "renesas,r8a7792"
-Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC
-product and revision information. If present, a device node for this register
-should be added.
+Most Renesas ARM SoCs have a Product Register or Boundary Scan ID Register that
+allows to retrieve SoC product and revision information. If present, a device
+node for this register should be added.
Required properties:
- - compatible: Must be "renesas,prr".
+ - compatible: Must be "renesas,prr" or "renesas,bsid"
- reg: Base address and length of the register block.
-Marvell Berlin SoC Family Device Tree Bindings
+Synaptics SoC Device Tree Bindings
+
+According to https://www.synaptics.com/company/news/conexant-marvell
+Synaptics has acquired the Multimedia Solutions Business of Marvell, so
+berlin SoCs are now Synaptics' SoCs now.
+
---------------------------------------------------------------
Work in progress statement:
---------------------------------------------------------------
+Boards with the Synaptics AS370 SoC shall have the following properties:
+ Required root node property:
+ compatible: "syna,as370"
+
Boards with a SoC of the Marvell Berlin family, e.g. Armada 1500
shall have the following properties:
nvidia,ventana
toradex,apalis_t30
toradex,apalis_t30-eval
+ toradex,apalis_t30-v1.1
+ toradex,apalis_t30-v1.1-eval
toradex,apalis-tk1
toradex,apalis-tk1-eval
- toradex,colibri_t20-512
+ toradex,apalis-tk1-v1.2
+ toradex,apalis-tk1-v1.2-eval
+ toradex,colibri_t20
+ toradex,colibri_t20-eval-v3
+ toradex,colibri_t20-iris
toradex,colibri_t30
toradex,colibri_t30-eval-v3
- toradex,iris
Trusted Foundations
-------------------------------------------
pmc@c360000 {
nvidia,invert-interrupt;
};
+
+== Pad Control ==
+
+On Tegra SoCs a pad is a set of pins which are configured as a group.
+The pin grouping is a fixed attribute of the hardware. The PMC can be
+used to set pad power state and signaling voltage. A pad can be either
+in active or power down mode. The support for power state and signaling
+voltage configuration varies depending on the pad in question. 3.3 V and
+1.8 V signaling voltages are supported on pins where software
+controllable signaling voltage switching is available.
+
+Pad configurations are described with pin configuration nodes which
+are placed under the pmc node and they are referred to by the pinctrl
+client properties. For more information see
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+
+The following pads are present on Tegra186:
+csia csib dsi mipi-bias
+pex-clk-bias pex-clk3 pex-clk2 pex-clk1
+usb0 usb1 usb2 usb-bias
+uart audio hsic dbg
+hdmi-dp0 hdmi-dp1 pex-cntrl sdmmc2-hv
+sdmmc4 cam dsib dsic
+dsid csic csid csie
+dsif spi ufs dmic-hv
+edp sdmmc1-hv sdmmc3-hv conn
+audio-hv ao-hv
+
+Required pin configuration properties:
+ - pins: A list of strings, each of which contains the name of a pad
+ to be configured.
+
+Optional pin configuration properties:
+ - low-power-enable: Configure the pad into power down mode
+ - low-power-disable: Configure the pad into active mode
+ - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8 or
+ TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+ The values are defined in
+ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+
+Note: The power state can be configured on all of the above pads except
+ for ao-hv. Following pads have software configurable signaling
+ voltages: sdmmc2-hv, dmic-hv, sdmmc1-hv, sdmmc3-hv, audio-hv,
+ ao-hv.
+
+Pad configuration state example:
+ pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra186-pmc";
+ reg = <0 0x0c360000 0 0x10000>,
+ <0 0x0c370000 0 0x10000>,
+ <0 0x0c380000 0 0x10000>,
+ <0 0x0c390000 0 0x10000>;
+ reg-names = "pmc", "wake", "aotag", "scratch";
+
+ ...
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ hdmi_off: hdmi-off {
+ pins = "hdmi";
+ low-power-enable;
+ }
+
+ hdmi_on: hdmi-on {
+ pins = "hdmi";
+ low-power-disable;
+ }
+ };
+
+Pinctrl client example:
+ sdmmc1: sdhci@3400000 {
+ ...
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ };
+
+ ...
+
+ sor0: sor@15540000 {
+ ...
+ pinctrl-0 = <&hdmi_off>;
+ pinctrl-1 = <&hdmi_on>;
+ pinctrl-names = "hdmi-on", "hdmi-off";
+ };
power-domains = <&pd_audio>;
...
};
+
+== Pad Control ==
+
+On Tegra SoCs a pad is a set of pins which are configured as a group.
+The pin grouping is a fixed attribute of the hardware. The PMC can be
+used to set pad power state and signaling voltage. A pad can be either
+in active or power down mode. The support for power state and signaling
+voltage configuration varies depending on the pad in question. 3.3 V and
+1.8 V signaling voltages are supported on pins where software
+controllable signaling voltage switching is available.
+
+The pad configuration state nodes are placed under the pmc node and they
+are referred to by the pinctrl client properties. For more information
+see Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt.
+The pad name should be used as the value of the pins property in pin
+configuration nodes.
+
+The following pads are present on Tegra124 and Tegra132:
+audio bb cam comp
+csia csb cse dsi
+dsib dsic dsid hdmi
+hsic hv lvds mipi-bias
+nand pex-bias pex-clk1 pex-clk2
+pex-cntrl sdmmc1 sdmmc3 sdmmc4
+sys_ddc uart usb0 usb1
+usb2 usb_bias
+
+The following pads are present on Tegra210:
+audio audio-hv cam csia
+csib csic csid csie
+csif dbg debug-nonao dmic
+dp dsi dsib dsic
+dsid emmc emmc2 gpio
+hdmi hsic lvds mipi-bias
+pex-bias pex-clk1 pex-clk2 pex-cntrl
+sdmmc1 sdmmc3 spi spi-hv
+uart usb0 usb1 usb2
+usb3 usb-bias
+
+Required pin configuration properties:
+ - pins: Must contain name of the pad(s) to be configured.
+
+Optional pin configuration properties:
+ - low-power-enable: Configure the pad into power down mode
+ - low-power-disable: Configure the pad into active mode
+ - power-source: Must contain either TEGRA_IO_PAD_VOLTAGE_1V8
+ or TEGRA_IO_PAD_VOLTAGE_3V3 to select between signaling voltages.
+ The values are defined in
+ include/dt-bindings/pinctrl/pinctrl-tegra-io-pad.h.
+
+Note: The power state can be configured on all of the Tegra124 and
+ Tegra132 pads. None of the Tegra124 or Tegra132 pads support
+ signaling voltage switching.
+
+Note: All of the listed Tegra210 pads except pex-cntrl support power
+ state configuration. Signaling voltage switching is supported on
+ following Tegra210 pads: audio, audio-hv, cam, dbg, dmic, gpio,
+ pex-cntrl, sdmmc1, sdmmc3, spi, spi-hv, and uart.
+
+Pad configuration state example:
+ pmc: pmc@7000e400 {
+ compatible = "nvidia,tegra210-pmc";
+ reg = <0x0 0x7000e400 0x0 0x400>;
+ clocks = <&tegra_car TEGRA210_CLK_PCLK>, <&clk32k_in>;
+ clock-names = "pclk", "clk32k_in";
+
+ ...
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ hdmi_off: hdmi-off {
+ pins = "hdmi";
+ low-power-enable;
+ }
+
+ hdmi_on: hdmi-on {
+ pins = "hdmi";
+ low-power-disable;
+ }
+ };
+
+Pinctrl client example:
+ sdmmc1: sdhci@700b0000 {
+ ...
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ };
+ ...
+ sor@54540000 {
+ ...
+ pinctrl-0 = <&hdmi_off>;
+ pinctrl-1 = <&hdmi_on>;
+ pinctrl-names = "hdmi-on", "hdmi-off";
+ };
<0xa0410100 0x100>;
};
- scu@a04100000 {
+ scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
+Optional properties:
+- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
+ on power off.
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
for the full list of i.MX6 Quad and DualLite clock IDs.
- compatible : must be one of the following string:
"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
+ "mediatek,mt7623-m4u", "mediatek,mt2701-m4u" for mt7623 which uses
+ generation one m4u HW.
"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
- reg : m4u register base and size.
- interrupts : the interrupt of m4u.
according to the local arbiter index, like larb0, larb1, larb2...
- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
Specifies the mtk_m4u_id as defined in
- dt-binding/memory/mt2701-larb-port.h for mt2701,
+ dt-binding/memory/mt2701-larb-port.h for mt2701, mt7623
dt-binding/memory/mt2712-larb-port.h for mt2712, and
dt-binding/memory/mt8173-larb-port.h for mt8173.
Required properties:
- compatible : must be one of the following string:
"mediatek,mt8173-jpgdec"
+ "mediatek,mt7623-jpgdec", "mediatek,mt2701-jpgdec"
"mediatek,mt2701-jpgdec"
- reg : physical base address of the jpeg decoder registers and length of
memory mapped region.
- compatible : must be one of :
"mediatek,mt2701-smi-common"
"mediatek,mt2712-smi-common"
+ "mediatek,mt7623-smi-common", "mediatek,mt2701-smi-common"
"mediatek,mt8173-smi-common"
- reg : the register and size of the SMI block.
- power-domains : a phandle to the power domain of this local arbiter.
- compatible : must be one of :
"mediatek,mt2701-smi-larb"
"mediatek,mt2712-smi-larb"
+ "mediatek,mt7623-smi-larb", "mediatek,mt2701-smi-larb"
"mediatek,mt8173-smi-larb"
- reg : the register and size of this local arbiter.
- mediatek,smi : a phandle to the smi_common node.
the register.
- "smi" : It's the clock for transfer data and command.
-Required property for mt2701 and mt2712:
+Required property for mt2701, mt2712 and mt7623:
- mediatek,larb-id :the hardware id of this larb.
Example:
"brcm,bcm6328-switch"
"brcm,bcm6368-switch" and the mandatory "brcm,bcm63xx-switch"
+Required properties for BCM585xx/586xx/88312 SoCs:
+
+ - reg: a total of 3 register base addresses, the first one must be the
+ Switch Register Access block base, the second is the port 5/4 mux
+ configuration register and the third one is the SGMII configuration
+ and status register base address.
+
+ - interrupts: a total of 13 interrupts must be specified, in the following
+ order: port 0-5, 7-8 link status change, then the integrated PHY interrupt,
+ then the timestamping interrupt and the sleep timer interrupts for ports
+ 5,7,8.
+
+Optional properties for BCM585xx/586xx/88312 SoCs:
+
+ - reg-names: a total of 3 names matching the 3 base register address, must
+ be in the following order:
+ "srab"
+ "mux_config"
+ "sgmii_config"
+
+ - interrupt-names: a total of 13 names matching the 13 interrupts specified
+ must be in the following order:
+ "link_state_p0"
+ "link_state_p1"
+ "link_state_p2"
+ "link_state_p3"
+ "link_state_p4"
+ "link_state_p5"
+ "link_state_p7"
+ "link_state_p8"
+ "phy"
+ "ts"
+ "imp_sleep_timer_p5"
+ "imp_sleep_timer_p7"
+ "imp_sleep_timer_p8"
+
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
"allwinner,sun8i-a83t-sid"
"allwinner,sun8i-h3-sid"
"allwinner,sun50i-a64-sid"
+ "allwinner,sun50i-h5-sid"
- reg: Should contain registers location and length
Required properties:
- compatible : "actions,s500-sps" for S500
"actions,s700-sps" for S700
+ "actions,s900-sps" for S900
- reg : Offset and length of the register set for the device.
- #power-domain-cells : Must be 1.
See macros in:
include/dt-bindings/power/owl-s500-powergate.h for S500
include/dt-bindings/power/owl-s700-powergate.h for S700
+ include/dt-bindings/power/owl-s900-powergate.h for S900
Example:
Required Properties:
- compatible: GRF should be one of the following:
+ - "rockchip,px30-grf", "syscon": for px30
- "rockchip,rk3036-grf", "syscon": for rk3036
- "rockchip,rk3066-grf", "syscon": for rk3066
- "rockchip,rk3188-grf", "syscon": for rk3188
- "rockchip,rk3399-grf", "syscon": for rk3399
- "rockchip,rv1108-grf", "syscon": for rv1108
- compatible: PMUGRF should be one of the following:
+ - "rockchip,px30-pmugrf", "syscon": for px30
- "rockchip,rk3368-pmugrf", "syscon": for rk3368
- "rockchip,rk3399-pmugrf", "syscon": for rk3399
- compatible: SGRF should be one of the following
- brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
- hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
- rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
+ - "rockchip,px30-usb", "rockchip,rk3066-usb", "snps,dwc2": for px30 Soc;
- "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
embest Shenzhen Embest Technology Co., Ltd.
emmicro EM Microelectronic
emtrion emtrion GmbH
+endless Endless Mobile, Inc.
energymicro Silicon Laboratories (formerly Energy Micro AS)
engicam Engicam S.r.l.
epcos EPCOS AG
pixcir PIXCIR MICROELECTRONICS Co., Ltd
plathome Plat'Home Co., Ltd.
plda PLDA
+plx Broadcom Corporation (formerly PLX Technology)
portwell Portwell Inc.
poslab Poslab Technology Co., Ltd.
powervr PowerVR (deprecated, use img)
bcm2836-rpi-2-b.dtb \
bcm2837-rpi-3-b.dtb \
bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb \
bcm2835-rpi-zero.dtb \
bcm2835-rpi-zero-w.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
meson6-atv1200.dtb
dtb-$(CONFIG_MACH_MESON8) += \
meson8-minix-neo-x8.dtb \
+ meson8b-ec100.dtb \
meson8b-mxq.dtb \
meson8b-odroidc1.dtb \
meson8m2-mxiii-plus.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
imx6ul-ccimx6ulsbcexpress.dtb \
+ imx6ul-ccimx6ulsbcpro.dtb \
imx6ul-geam.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-nand.dtb \
imx6ul-tx6ul-mainboard.dtb \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
- imx6ull-colibri-wifi-eval-v3.dtb
+ imx6ull-colibri-wifi-eval-v3.dtb \
+ imx6ulz-14x14-evk.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
imx7d-colibri-emmc-eval-v3.dtb \
omap3-gta04a3.dtb \
omap3-gta04a4.dtb \
omap3-gta04a5.dtb \
+ omap3-gta04a5one.dtb \
omap3-ha.dtb \
omap3-ha-lcd.dtb \
omap3-igep0020.dtb \
am335x-evmsk.dtb \
am335x-icev2.dtb \
am335x-lxm.dtb \
+ am335x-moxa-uc-2101.dtb \
am335x-moxa-uc-8100-me-t.dtb \
am335x-nano.dtb \
am335x-pdu001.dtb \
rk3288-r89.dtb \
rk3288-rock2-square.dtb \
rk3288-tinker.dtb \
+ rk3288-tinker-s.dtb \
rk3288-veyron-brain.dtb \
rk3288-veyron-jaq.dtb \
rk3288-veyron-jerry.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
socfpga_cyclone5_mcvevk.dtb \
socfpga_cyclone5_socdk.dtb \
- socfpga_cyclone5_de0_sockit.dtb \
+ socfpga_cyclone5_de0_nano_soc.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_cyclone5_sodia.dtb \
sun8i-h2-plus-orangepi-r1.dtb \
sun8i-h2-plus-orangepi-zero.dtb \
sun8i-h3-bananapi-m2-plus.dtb \
+ sun8i-h3-bananapi-m2-plus-v1.2.dtb \
sun8i-h3-beelink-x2.dtb \
sun8i-h3-libretech-all-h3-cc.dtb \
sun8i-h3-nanopi-m1.dtb \
sun8i-h3-orangepi-pc-plus.dtb \
sun8i-h3-orangepi-plus.dtb \
sun8i-h3-orangepi-plus2e.dtb \
+ sun8i-h3-orangepi-zero-plus2.dtb \
sun8i-r16-bananapi-m2m.dtb \
sun8i-r16-nintendo-nes-classic.dtb \
sun8i-r16-nintendo-super-nes-classic.dtb \
tango4-vantage-1172.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
tegra20-harmony.dtb \
+ tegra20-colibri-eval-v3.dtb \
tegra20-colibri-iris.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-ventana.dtb
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
tegra30-apalis-eval.dtb \
+ tegra30-apalis-v1.1-eval.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-db-88f6820-amc.dtb \
armada-385-db-ap.dtb \
armada-385-linksys-caiman.dtb \
armada-385-linksys-cobra.dtb \
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-bmc-arm-centriq2400-rep.dtb \
+ aspeed-bmc-arm-stardragon4800-rep2.dtb \
+ aspeed-bmc-facebook-tiogapass.dtb \
aspeed-bmc-intel-s2600wf.dtb \
aspeed-bmc-opp-lanyang.dtb \
aspeed-bmc-opp-palmetto.dtb \
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "mii";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&mmc1 {
*/
#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
&ldo3_reg {
regulator-min-microvolt = <1800000>;
};
&i2c0 {
- tda19988: tda19988 {
+ tda19988: tda19988@70 {
compatible = "nxp,tda998x";
reg = <0x70>;
+ nxp,calib-gpios = <&gpio1 25 0>;
+ interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
+ slaves = <1>;
};
&davinci_mdio {
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
-};
-&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
- phy-mode = "rgmii-txid";
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
-&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+&cpsw_emac0 {
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
&davinci_mdio {
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
+
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rmii";
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <ðphy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <3>;
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@5 {
+ reg = <5>;
+ };
+
+ ethphy1: ethernet-phy@4 {
+ reg = <4>;
+ };
};
&mmc1 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+ vbat: vbat-regulator {
+ compatible = "regulator-fixed";
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: vmmcsd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ buttons: push_button {
+ compatible = "gpio-keys";
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ push_button_pins: pinmux_push_button {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ mmc1_pins_default: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ /* eMMC */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ >;
+ };
+
+ spi0_pins: pinmux_spi0 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+ >;
+ };
+};
+
+&uart0 {
+ /* Console */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
+
+ rtc_wdt: rtc_wdt@68 {
+ compatible = "dallas,ds1374";
+ reg = <0x68>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+/* Power */
+&vbat {
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+};
+
+&mac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cpsw_default>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&davinci_mdio_default>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ status = "okay";
+};
+
+&cpsw_emac1 {
+ status = "okay";
+};
+
+&phy_sel {
+ reg= <0x44e10650 0xf5>;
+ rmii-clock-ext;
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&gpio0 {
+ ti,no-reset-on-init;
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ pinctrl-0 = <&mmc1_pins_default>;
+ ti,non-removable;
+ status = "okay";
+};
+
+&buttons {
+ pinctrl-names = "default";
+ pinctrl-0 = <&push_button_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button@0 {
+ label = "push_button";
+ linux,code = <0x100>;
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ };
+};
+
+/* SPI Busses */
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins>;
+
+ m25p80@0 {
+ compatible = "mx25l6405d";
+ spi-max-frequency = <40000000>;
+
+ reg = <0>;
+ spi-cpol;
+ spi-cpha;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* reg : The partition's offset and size within the mtd bank. */
+ partitions@0 {
+ label = "MLO";
+ reg = <0x0 0x80000>;
+ };
+
+ partitions@1 {
+ label = "U-Boot";
+ reg = <0x80000 0x100000>;
+ };
+
+ partitions@2 {
+ label = "U-Boot Env";
+ reg = <0x180000 0x40000>;
+ };
+ };
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+
+ tpm_spi_tis@0 {
+ compatible = "tcg,tpm_tis-spi";
+ reg = <0>;
+ spi-max-frequency = <500000>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ * Wes Huang (黃淵河) <wes.huang@moxa.com>
+ * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+/dts-v1/;
+
+#include "am335x-moxa-uc-2100-common.dtsi"
+
+/ {
+ model = "Moxa UC-2101";
+ compatible = "moxa,uc-2101", "ti,am33xx";
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ label = "UC2100:GREEN:USER";
+ gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1 {
+ pinctrl-single,pins = <
+ AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */
+ >;
+ };
+};
+
+&davinci_mdio {
+ phy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&cpsw_emac0 {
+ status = "okay";
+ phy-handle = <&phy0>;
+ phy-mode = "rmii";
+};
+
+&cpsw_emac1 {
+ status = "disabled";
+};
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
};
&cpsw_emac0 {
status = "okay";
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
status = "okay";
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <ðphy1>;
phy-mode = "rmii";
dual_emac_res_vlan = <2>;
};
&davinci_mdio {
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
};
- bmp280: pressure@78 {
+ bmp280: pressure@76 {
compatible = "bosch,bmp280";
reg = <0x76>;
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
};
&mmc1 {
ti,pindir-d0-out-d1-in;
status = "okay";
- cfaf240320a032t {
+ display-controller@0 {
compatible = "orisetech,otm3225a";
reg = <0>;
spi-max-frequency = <1000000>;
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "mii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "mii";
dual_emac_res_vlan = <2>;
};
/* Ethernet */
&cpsw_emac0 {
status = "okay";
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
status = "okay";
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
};
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mdio_pins>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&mac {
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
};
status = "okay";
slaves = <1>;
cpsw_emac0: slave@4a100200 {
- phy_id = <&davinci_mdio>, <0>;
phy-mode = "mii";
phy-handle = <ðernetphy0>;
};
--- /dev/null
+/*
+ * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ codec1 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tlv320aic23-hifi";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic In",
+ "Line", "Line In",
+ "Line", "Line Out";
+
+ simple-audio-card,routing =
+ "Line Out", "LOUT",
+ "Line Out", "ROUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic In";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp1>;
+ };
+
+ sound_master: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23_1>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ codec2 {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "tlv320aic23-hifi";
+
+ simple-audio-card,widgets =
+ "Microphone", "Mic In",
+ "Line", "Line In",
+ "Line", "Line Out";
+
+ simple-audio-card,routing =
+ "Line Out", "LOUT",
+ "Line Out", "ROUT",
+ "LLINEIN", "Line In",
+ "RLINEIN", "Line In",
+ "MICIN", "Mic In";
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master2>;
+ simple-audio-card,frame-master = <&sound_master2>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&mcbsp2>;
+ };
+
+ sound_master2: simple-audio-card,codec {
+ sound-dai = <&tlv320aic23_2>;
+ system-clock-frequency = <12000000>;
+ };
+ };
+
+ expander-keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <100>;
+
+ record {
+ label = "Record";
+ /* linux,code = <BTN_0>; */
+ gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+ };
+
+ play {
+ label = "Play";
+ linux,code = <KEY_PLAY>;
+ gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+ };
+
+ Stop {
+ label = "Stop";
+ linux,code = <KEY_STOP>;
+ gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+ };
+
+ fwd {
+ label = "FWD";
+ linux,code = <KEY_FASTFORWARD>;
+ gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+ };
+
+ rwd {
+ label = "RWD";
+ linux,code = <KEY_REWIND>;
+ gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+ };
+
+ shift {
+ label = "Shift";
+ linux,code = <KEY_LEFTSHIFT>;
+ gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+ };
+
+ Mode {
+ label = "Mode";
+ linux,code = <BTN_MODE>;
+ gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+ };
+
+ Menu {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+ };
+
+ Up {
+ label = "Up";
+ linux,code = <KEY_UP>;
+ gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+ };
+
+ Down {
+ label = "Down";
+ linux,code = <KEY_DOWN>;
+ gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2c2 {
+ /* Audio codecs */
+ tlv320aic23_1: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+
+ tlv320aic23_2: codec@1b {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1b>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ /* Audio codecs */
+ tlv320aic23_3: codec@1a {
+ compatible = "ti,tlv320aic23";
+ reg = <0x1a>;
+ #sound-dai-cells= <0>;
+ status = "okay";
+ };
+
+ /* GPIO Expanders */
+ tca6416_2: gpio@20 {
+ compatible = "ti,tca6416";
+ reg = <0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+
+ tca6416_3: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_io_reg>;
+ };
+
+ /* TVP5146 Analog Video decoder input */
+ tvp5146@5c {
+ compatible = "ti,tvp5146m2";
+ reg = <0x5c>;
+ };
+};
+
+&mcbsp1 {
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */
+ >;
+ };
+};
#include "am3517.dtsi"
#include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
#include <dt-bindings/input/input.h>
/ {
};
};
- qspi: qspi@47900000 {
+ qspi: spi@47900000 {
compatible = "ti,am4372-qspi";
reg = <0x47900000 0x100>,
<0x30000000 0x4000000>;
pinctrl-names = "default";
pinctrl-0 = <&davinci_mdio_default>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <2>;
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@4 {
+ reg = <4>;
+ };
+
+ ethphy1: ethernet-phy@5 {
+ reg = <5>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <4>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <5>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
+
+ ethphy0: ethernet-phy@16 {
+ reg = <16>;
+ };
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <16>;
+ phy-handle = <ðphy0>;
phy-mode = "rmii";
};
linux,default-trigger = "mmc0";
};
};
+
+ idk-leds {
+ status = "disabled";
+ compatible = "gpio-leds";
+ red0-led {
+ label = "idk:red0";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green0-led {
+ label = "idk:green0";
+ gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue0-led {
+ label = "idk:blue0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red1-led {
+ label = "idk:red1";
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1-led {
+ label = "idk:green1";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue1-led {
+ label = "idk:blue1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2-led {
+ label = "idk:red2";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green2-led {
+ label = "idk:green2";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue2-led {
+ label = "idk:blue2";
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red3-led {
+ label = "idk:red3";
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green3-led {
+ label = "idk:green3";
+ gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue3-led {
+ label = "idk:blue3";
+ gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
};
&extcon_usb2 {
vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
+&sn65hvs882 {
+ load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
-
-&cpu0 {
- vdd-supply = <&smps12_reg>;
-};
linux,default-trigger = "mmc0";
};
};
+
+ idk-leds {
+ status = "disabled";
+ compatible = "gpio-leds";
+ red0-led {
+ label = "idk:red0";
+ gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green0-led {
+ label = "idk:green0";
+ gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue0-led {
+ label = "idk:blue0";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red1-led {
+ label = "idk:red1";
+ gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green1-led {
+ label = "idk:green1";
+ gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue1-led {
+ label = "idk:blue1";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red2-led {
+ label = "idk:red2";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green2-led {
+ label = "idk:green2";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue2-led {
+ label = "idk:blue2";
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red3-led {
+ label = "idk:red3";
+ gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ green3-led {
+ label = "idk:green3";
+ gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ blue3-led {
+ label = "idk:blue3";
+ gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
};
&extcon_usb2 {
pinctrl-1 = <&mmc2_pins_hs>;
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
};
-
-&cpu0 {
- vdd-supply = <&smps12_reg>;
-};
};
/* touch controller */
- ads7846@0 {
+ touchscreen@1 {
pinctrl-names = "default";
pinctrl-0 = <&ads7846_pins>;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <0>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii-txid";
dual_emac_res_vlan = <1>;
};
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_pins_default>;
pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
};
&usb2_phy1 {
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&usb2_phy1 {
phy-supply = <&ldousb_reg>;
};
};
};
};
+
+&cpu0 {
+ vdd-supply = <&smps12_reg>;
+};
clock-names = "uartclk", "apb_pclk";
};
- ssp: ssp@1000d000 {
+ ssp: spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
clock-names = "apb_pclk";
};
- pb1176_ssp: ssp@1010b000 {
+ pb1176_ssp: spi@1010b000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1010b000 0x1000>;
interrupt-parent = <&intc_dc1176>;
clock-names = "uartclk", "apb_pclk";
};
- ssp@1000d000 {
+ spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
interrupt-parent = <&intc_pb11mp>;
clock-names = "uartclk", "apb_pclk";
};
- ssp: ssp@1000d000 {
+ ssp: spi@1000d000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x1000d000 0x1000>;
clocks = <&sspclk>, <&pclk>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Marvell Armada 385 AMC";
+ compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ spi1 = &spi1;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>; /* 2GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+};
+
+&uart0 {
+ /*
+ * Exported on the micro USB connector CON3
+ * through an FTDI
+ */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+
+ð0 {
+ pinctrl-names = "default";
+ /*
+ * The Reference Clock 0 is used to provide a
+ * clock to the PHY
+ */
+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+ð2 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+
+
+&mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mdio_pins>;
+
+ phy0: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ phy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&nand_controller {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ nand-on-flash-bbt;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ reg = <0x00000000 0x40000000>;
+ label = "user";
+ };
+ };
+ };
+};
+
+&pciec {
+ status = "okay";
+};
+
+&pcie1 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ reg = <0x00000000 0x00100000>;
+ label = "u-boot";
+ };
+ partition@100000 {
+ reg = <0x00100000 0x00040000>;
+ label = "u-boot-env";
+ };
+ };
+ };
+};
+
+&refclk {
+ clock-frequency = <20000000>;
+};
&clearfog_sdhci_cd_pins>;
pinctrl-names = "default";
status = "okay";
- vmmc = <®_3p3v>;
+ vmmc-supply = <®_3p3v>;
wp-inverted;
};
};
};
- nand: nand@d0000 {
+ nand_controller: nand-controller@d0000 {
clocks = <&dfx_coredivclk 0>;
};
ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
pp0: packet-processor@0 {
- compatible = "marvell,prestera-98dx3236";
+ compatible = "marvell,prestera-98dx3236", "marvell,prestera";
reg = <0 0x4000000>;
interrupts = <33>, <34>, <35>;
dfx = <&dfx>;
};
&pp0 {
- compatible = "marvell,prestera-98dx3336";
+ compatible = "marvell,prestera-98dx3336", "marvell,prestera";
};
};
&pp0 {
- compatible = "marvell,prestera-98dx4251";
+ compatible = "marvell,prestera-98dx4251", "marvell,prestera";
interrupts = <33>, <34>, <35>, <36>;
};
status = "okay";
};
-&nand {
+&nand_controller {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
};
&sdio {
status = "okay";
};
-&nand {
+&nand_controller {
status = "okay";
- label = "pxa3xx_nand-0";
- num-cs = <1>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
+
+ nand@0 {
+ reg = <0>;
+ label = "pxa3xx_nand-0";
+ nand-rb = <0>;
+ marvell,nand-keep-config;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ };
};
&spi0 {
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "HXT StarDragon 4800 REP2 AST2520";
+ compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+ };
+
+ iio-hwmon-battery {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 7>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ system_fault1 {
+ label = "System_fault1";
+ gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+ };
+
+ system_fault2 {
+ label = "System_fault2";
+ gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ };
+};
+
+&spi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2ck_default
+ &pinctrl_spi2miso_default
+ &pinctrl_spi2mosi_default
+ &pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+ current-speed = <115200>;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default>;
+ use-ncsi;
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ tmp421@1e {
+ compatible = "ti,tmp421";
+ reg = <0x1e>;
+ };
+ tmp421@2a {
+ compatible = "ti,tmp421";
+ reg = <0x2a>;
+ };
+ tmp421@1c {
+ compatible = "ti,tmp421";
+ reg = <0x1c>;
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+
+ tmp421@1f {
+ compatible = "ti,tmp421";
+ reg = <0x1f>;
+ };
+ nvt210@4c {
+ compatible = "nvt210";
+ reg = <0x4c>;
+ };
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <128>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ pca9641@70 {
+ compatible = "nxp,pca9641";
+ reg = <0x70>;
+ i2c-arb {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ };
+ dps650ab@58 {
+ compatible = "dps650ab";
+ reg = <0x58>;
+ };
+ };
+ };
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+ pin_gpio_c7 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "BIOS_SPI_MUX_S";
+ };
+ pin_gpio_d1 {
+ gpio-hog;
+ gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PHY2_RESET_N";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Facebook TiogaPass BMC";
+ compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+ aliases {
+ serial0 = &uart1;
+ serial4 = &uart5;
+ };
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+ };
+};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "pnor";
+ };
+};
+
+&uart1 {
+ // Host Console
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_txd1_default
+ &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+ // BMC Console
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii1_default>;
+ use-ncsi;
+};
+
+&i2c0 {
+ status = "okay";
+ //Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+ status = "okay";
+ //X24 Riser
+};
+
+&i2c2 {
+ status = "okay";
+ // Mezz Management SMBus
+};
+
+&i2c3 {
+ status = "okay";
+ // SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+ status = "okay";
+ // BMC Debug Header
+};
+
+&i2c5 {
+ status = "okay";
+ // CPU Voltage regulators
+};
+
+&i2c6 {
+ status = "okay";
+ tpm@20 {
+ compatible = "infineon,slb9645tt";
+ reg = <0x20>;
+ };
+ tmp421@4e {
+ compatible = "ti,tmp421";
+ reg = <0x4e>;
+ };
+ tmp421@4f {
+ compatible = "ti,tmp421";
+ reg = <0x4f>;
+ };
+ eeprom@54 {
+ compatible = "atmel,24c64";
+ reg = <0x54>;
+ pagesize = <32>;
+ };
+};
+
+&i2c7 {
+ status = "okay";
+ //HSC, AirMax Conn A
+};
+
+&i2c8 {
+ status = "okay";
+ //Mezz Sensor SMBus
+};
+
+&i2c9 {
+ status = "okay";
+ //USB Debug Connector
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+};
model = "Quanta Q71L BMC";
compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+ aliases {
+ i2c14 = &i2c_pcie2;
+ i2c15 = &i2c_pcie3;
+ i2c16 = &i2c_pcie6;
+ i2c17 = &i2c_pcie7;
+ i2c18 = &i2c_pcie1;
+ i2c19 = &i2c_pcie4;
+ i2c20 = &i2c_pcie5;
+ i2c21 = &i2c_pcie8;
+ i2c22 = &i2c_pcie9;
+ i2c23 = &i2c_pcie10;
+ i2c24 = &i2c_ssd1;
+ i2c25 = &i2c_ssd2;
+ i2c26 = &i2c_psu4;
+ i2c27 = &i2c_psu1;
+ i2c28 = &i2c_psu3;
+ i2c29 = &i2c_psu2;
+ };
+
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
};
+&ibt {
+ status = "okay";
+};
+
&lpc_snoop {
status = "okay";
snoop-ports = <0x80>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
+
+ psu@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
};
i2c_psu1: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
+
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
};
i2c_psu3: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
+
+ psu@58 {
+ compatible = "pmbus";
+ reg = <0x58>;
+ };
};
i2c_psu2: i2c@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
+
+ psu@59 {
+ compatible = "pmbus";
+ reg = <0x59>;
+ };
};
};
status = "okay";
};
+&adc {
+ status = "okay";
+};
+
&pwm_tacho {
status = "okay";
status = "disabled";
};
- i2c: i2c@1e78a000 {
+ i2c: bus@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
- i2c: i2c@1e78a000 {
+ i2c: bus@1e78a000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
&i2c1 {
status = "okay";
- eeprom@87 {
+ eeprom@57 {
compatible = "giantec,gt24c32a", "atmel,24c32";
- reg = <87>;
+ reg = <0x57>;
pagesize = <32>;
};
};
&i2c1 {
status = "okay";
- ft5426@56 {
+ ft5426@38 {
compatible = "focaltech,ft5426", "edt,edt-ft5406";
- reg = <56>;
+ reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd_ctp_int>;
compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- ahb {
- apb {
- pinctrl@fffff200 {
- nattis {
- pinctrl_usba_vbus: usba_vbus {
- atmel,pins =
- <AT91_PIOD 28
- AT91_PERIPH_GPIO
- AT91_PINCTRL_DEGLITCH>;
- };
-
- pinctrl_mmc0_cd: mmc0_cd {
- atmel,pins =
- <AT91_PIOD 5
- AT91_PERIPH_GPIO
- AT91_PINCTRL_PULL_UP_DEGLITCH>;
- };
-
- pinctrl_lcd_prlud0: lcd_prlud0 {
- atmel,pins =
- <AT91_PIOA 21
- AT91_PERIPH_GPIO
- AT91_PINCTRL_OUTPUT_VAL(0)>;
- };
-
- pinctrl_lcd_hipow0: lcd_hipow0 {
- atmel,pins =
- <AT91_PIOA 23
- AT91_PERIPH_GPIO
- AT91_PINCTRL_OUTPUT_VAL(0)>;
- };
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
- };
-
gpio-keys {
compatible = "gpio-keys";
};
panel: panel {
- compatible = "sharp,lq150x1lg11";
+ compatible = "sharp,lq150x1lg11", "panel-lvds";
+
backlight = <&panel_bl>;
power-supply = <&panel_reg>;
+ width-mm = <304>;
+ height-mm = <228>;
+
+ data-mapping = "jeida-18";
+
+ panel-timing {
+ // 1024x768 @ 60Hz (typical)
+ clock-frequency = <50000000 65000000 80000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hfront-porch = <48 88 88>;
+ hback-porch = <96 168 168>;
+ hsync-len = <32 64 64>;
+ vsync-len = <3 13 74>;
+ vfront-porch = <3 13 74>;
+ vback-porch = <3 12 74>;
+ };
+
port {
panel_input: endpoint {
remote-endpoint = <&lvds_encoder_output>;
};
lvds-encoder {
- compatible = "lvds-encoder";
+ compatible = "ti,ds90c185", "lvds-encoder";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
ports {
#address-cells = <1>;
};
};
+&pinctrl {
+ nattis {
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO
+ AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_lvds_prlud0: lvds_prlud0 {
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+
+ pinctrl_lvds_hipow0: lvds_hipow0 {
+ atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+ (AT91_PINCTRL_OUTPUT |
+ AT91_PINCTRL_OUTPUT_VAL(0))>;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
hlcdc-display-controller {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcd_base
- &pinctrl_lcd_rgb565
- &pinctrl_lcd_prlud0
- &pinctrl_lcd_hipow0>;
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
port@0 {
hlcdc_output: endpoint {
remote-endpoint = <&lvds_encoder_input>;
+ bus-width = <16>;
};
};
};
reg = <0>;
bus-width = <4>;
cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
};
};
status = "okay";
};
+ adc: adc@fc030000 {
+ vddana-supply = <&vddana>;
+ vref-supply = <&advref>;
+
+ status = "disabled";
+ };
+
pinctrl@fc038000 {
pinctrl_can1_default: can1_default {
linux,default-trigger = "heartbeat";
};
};
+
+ vddin_3v3: fixed-regulator-vddin_3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDIN_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ status = "okay";
+ };
+
+ vddana: fixed-regulator-vddana {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDDANA";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vddin_3v3>;
+ status = "okay";
+ };
+
+ advref: fixed-regulator-advref {
+ compatible = "regulator-fixed";
+
+ regulator-name = "advref";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vddana>;
+ status = "okay";
+ };
};
reg = <0x40000 0xc0000>;
};
- bootloaderenv@0x100000 {
- label = "bootloader env";
+ bootloaderenvred@0x100000 {
+ label = "bootloader env redundant";
reg = <0x100000 0x40000>;
};
- bootloaderenvred@0x140000 {
- label = "bootloader env redundant";
+ bootloaderenv@0x140000 {
+ label = "bootloader env";
reg = <0x140000 0x40000>;
};
status = "okay";
};
+ i2s0: i2s@f8050000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s0_default>;
+ status = "disabled"; /* conflict with can0 */
+ };
+
can0: can@f8054000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_default>;
bias-disable;
};
+ pinctrl_i2s0_default: i2s0_default {
+ pinmux = <PIN_PC1__I2SC0_CK>,
+ <PIN_PC2__I2SC0_MCK>,
+ <PIN_PC3__I2SC0_WS>,
+ <PIN_PC4__I2SC0_DI0>,
+ <PIN_PC5__I2SC0_DO0>;
+ bias-disable;
+ };
+
+ pinctrl_i2s1_default: i2s1_default {
+ pinmux = <PIN_PA15__I2SC1_CK>,
+ <PIN_PA14__I2SC1_MCK>,
+ <PIN_PA16__I2SC1_WS>,
+ <PIN_PA17__I2SC1_DI0>,
+ <PIN_PA18__I2SC1_DO0>;
+ bias-disable;
+ };
+
pinctrl_key_gpio_default: key_gpio_default {
pinmux = <PIN_PB9__GPIO>;
bias-pull-up;
status = "okay";
};
+ i2s1: i2s@fc04c000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2s1_default>;
+ status = "disabled"; /* conflict with spi0, sdmmc1 */
+ };
+
can1: can@fc050000 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_default>;
bootloader@40000 {
label = "bootloader";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- bootloaderenv@c0000 {
+ bootloaderenvred@100000 {
+ label = "bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
label = "bootloader env";
- reg = <0xc0000 0xc0000>;
+ reg = <0x140000 0x40000>;
};
dtb@180000 {
bootloader@40000 {
label = "bootloader";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- bootloaderenv@c0000 {
+ bootloaderenvred@100000 {
+ label = "bootloader env redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ bootloaderenv@140000 {
label = "bootloader env";
- reg = <0xc0000 0xc0000>;
+ reg = <0x140000 0x40000>;
};
dtb@180000 {
rootfs@800000 {
label = "rootfs";
- reg = <0x800000 0x0f800000>;
+ reg = <0x800000 0x1f800000>;
};
};
};
compatible = "axentia,tse850v3", "axentia,linea",
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
- ahb {
- apb {
- pinctrl@fffff200 {
- tse850 {
- pinctrl_usba_vbus: usba-vbus {
- atmel,pins =
- <AT91_PIOC 31
- AT91_PERIPH_GPIO
- AT91_PINCTRL_DEGLITCH>;
- };
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
- };
-
sck: oscillator {
compatible = "fixed-clock";
};
};
+&pinctrl {
+ tse850 {
+ pinctrl_usba_vbus: usba-vbus {
+ atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+ AT91_PINCTRL_DEGLITCH>;
+ };
+ };
+};
+
+&watchdog {
+ status = "okay";
+};
+
&usart0 {
status = "okay";
i2c2: i2c@f8024000 {
status = "okay";
- rtc1: rtc@64 {
+ rtc1: rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
- mtd_dataflash@0 {
+ mtd_dataflash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
spi-max-frequency = <15000000>;
};
- tsc2046@0 {
+ tsc2046@2 {
reg = <2>;
compatible = "ti,ads7843";
interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
spi0: spi@fffc8000 {
cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
- mtd_dataflash@0 {
+ mtd_dataflash@1 {
compatible = "atmel,at45", "atmel,dataflash";
spi-max-frequency = <50000000>;
reg = <1>;
};
};
- uart1 {
+ usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
uboot@40000 {
label = "u-boot";
- reg = <0x40000 0x80000>;
+ reg = <0x40000 0xc0000>;
};
- ubootenv@c0000 {
+ ubootenvred@100000 {
+ label = "U-Boot Env Redundant";
+ reg = <0x100000 0x40000>;
+ };
+
+ ubootenv@140000 {
label = "U-Boot Env";
- reg = <0xc0000 0x140000>;
+ reg = <0x140000 0x40000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
};
kernel@200000 {
rootfs@800000 {
label = "rootfs";
- reg = <0x800000 0x1f800000>;
+ reg = <0x800000 0x0f800000>;
};
};
};
reg = <0x33000 0x14>;
};
- qspi: qspi@27200 {
+ qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
brcm,nand-has-wp;
};
- qspi: qspi@27200 {
+ qspi: spi@27200 {
compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
reg = <0x027200 0x184>,
<0x027000 0x124>,
srab: srab@36000 {
compatible = "brcm,nsp-srab";
- reg = <0x36000 0x1000>;
+ reg = <0x36000 0x1000>,
+ <0x3f308 0x8>,
+ <0x3f410 0xc>;
+ reg-names = "srab", "mux_config", "sgmii";
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "link_state_p0",
+ "link_state_p1",
+ "link_state_p2",
+ "link_state_p3",
+ "link_state_p4",
+ "link_state_p5",
+ "link_state_p7",
+ "link_state_p8",
+ "phy",
+ "ts",
+ "imp_sleep_timer_p5",
+ "imp_sleep_timer_p7",
+ "imp_sleep_timer_p8";
#address-cells = <1>;
#size-cells = <0>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+ model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+ /*
+ * This is based on the official GPU firmware DT blob.
+ *
+ * Legend:
+ * "NC" = not connected (no rail from the SoC)
+ * "FOO" = GPIO line named "FOO" on the schematic
+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
+ */
+ gpio-line-names = "GPIO0",
+ "GPIO1",
+ "GPIO2",
+ "GPIO3",
+ "GPIO4",
+ "GPIO5",
+ "GPIO6",
+ "GPIO7",
+ "GPIO8",
+ "GPIO9",
+ "GPIO10",
+ "GPIO11",
+ "GPIO12",
+ "GPIO13",
+ "GPIO14",
+ "GPIO15",
+ "GPIO16",
+ "GPIO17",
+ "GPIO18",
+ "GPIO19",
+ "GPIO20",
+ "GPIO21",
+ "GPIO22",
+ "GPIO23",
+ "GPIO24",
+ "GPIO25",
+ "GPIO26",
+ "GPIO27",
+ "GPIO28",
+ "GPIO29",
+ "GPIO30",
+ "GPIO31",
+ "GPIO32",
+ "GPIO33",
+ "GPIO34",
+ "GPIO35",
+ "GPIO36",
+ "GPIO37",
+ "GPIO38",
+ "GPIO39",
+ "GPIO40",
+ "GPIO41",
+ "GPIO42",
+ "GPIO43",
+ "GPIO44",
+ "GPIO45",
+ "GPIO46",
+ "GPIO47",
+ /* Used by eMMC */
+ "SD_CLK_R",
+ "SD_CMD_R",
+ "SD_DATA0_R",
+ "SD_DATA1_R",
+ "SD_DATA2_R",
+ "SD_DATA3_R";
+
+ pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+ hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+
+/ {
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ reg_3v3: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_1v8: fixed-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&firmware {
+ expgpio: gpio {
+ compatible = "raspberrypi,firmware-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "HDMI_HPD_N",
+ "EMMC_EN_N",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC";
+ status = "okay";
+ };
+};
+
+&sdhost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhost_gpio48>;
+ bus-width = <4>;
+ vmmc-supply = <®_3v3>;
+ vqmmc-supply = <®_1v8>;
+ status = "okay";
+};
// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
/ {
aliases {
ethernet0 = ðernet;
ethernet: ethernet@1 {
compatible = "usb424,7800";
reg = <1>;
+
+ mdio {
+ #address-cells = <0x1>;
+ #size-cells = <0x0>;
+ eth_phy: ethernet-phy@1 {
+ reg = <1>;
+ microchip,led-modes = <
+ LAN78XX_LINK_1000_ACTIVITY
+ LAN78XX_LINK_10_100_ACTIVITY
+ >;
+ };
+ };
};
};
};
&spi_nor {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ os-image@100000 {
+ label = "os-image";
+ reg = <0x040000 0x200000>;
+ compatible = "brcm,trx";
+ };
+
+ rootfs@240000 {
+ label = "rootfs";
+ reg = <0x240000 0xc00000>;
+ };
+
+ nvram@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
};
&usb2 {
&usb3_phy {
status = "okay";
};
+
+&nandcs {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x00000000 0x00080000>;
+ read-only;
+ };
+
+ nvram@80000 {
+ label = "nvram";
+ reg = <0x00080000 0x00180000>;
+ };
+
+ firmware@200000 {
+ label = "firmware";
+ reg = <0x00200000 0x07cc0000>;
+ compatible = "brcm,trx";
+ };
+
+ asus@7ec0000 {
+ label = "asus";
+ reg = <0x07ec0000 0x00140000>;
+ read-only;
+ };
+ };
+};
&spi_nor {
status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ boot@0 {
+ label = "boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ os-image@100000 {
+ label = "os-image";
+ reg = <0x040000 0x200000>;
+ compatible = "brcm,trx";
+ };
+
+ rootfs@240000 {
+ label = "rootfs";
+ reg = <0x240000 0xc00000>;
+ };
+
+ nvram@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x010000>;
+ };
+ };
};
&usb3_phy {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
};
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
- linux,part-probe = "ofpart", "bcm47xxpart";
status = "disabled";
+
+ partitions {
+ compatible = "brcm,bcm947xx-cfe-partitions";
+ };
};
};
open-source;
priority = <200>;
};
+
+ /* Hardware I2C block cannot do more than 63 bytes per transfer,
+ * which would prevent reading from a SFP's EEPROM (256 byte).
+ */
+ i2c1: i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ };
+
+ sfp: sfp {
+ compatible = "sff,sfp";
+ i2c-bus = <&i2c1>;
+ mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+ los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+ tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+ };
};
&amac0 {
reg = <4>;
};
+ port@5 {
+ label = "sfp";
+ phy-mode = "sgmii";
+ reg = <5>;
+ sfp = <&sfp>;
+ managed = "in-band-status";
+ };
+
port@8 {
ethernet = <&amac2>;
label = "cpu";
gpio-controller;
#gpio-cells = <2>;
};
+ tca6416_bb: gpio@21 {
+ compatible = "ti,tca6416";
+ reg = <0x21>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
&wdt {
compatible = "ti,ads7957";
reg = <3>;
#io-channel-cells = <1>;
- spi-max-frequency = <10000000>;
+ spi-max-frequency = <1000000>;
+ ti,spi-wdelay = <63>;
vref-supply = <&adc_ref>;
};
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&mmc1 {
status = "disabled";
};
status = "okay";
clock-frequency = <100000>;
- si5351: clock-generator {
+ si5351: clock-generator@60 {
compatible = "silabs,si5351a-msop";
reg = <0x60>;
#address-cells = <1>;
0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */
0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */
- spi0: spi-ctrl@10600 {
+ spi0: spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- i2c: i2c-ctrl@11000 {
+ i2c: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
status = "disabled";
};
- spi1: spi-ctrl@14600 {
+ spi1: spi@14600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <0>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
&gpmc {
ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <ðphy1>;
phy-mode = "rgmii";
dual_emac_res_vlan = <2>;
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@2 {
+ reg = <2>;
+ };
+
+ ethphy1: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
&dcan1 {
status = "ok";
pinctrl-names = "default", "sleep", "active";
<0 0 0 2 &pcie1_intc 2>,
<0 0 0 3 &pcie1_intc 3>,
<0 0 0 4 &pcie1_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
status = "disabled";
pcie1_intc: interrupt-controller {
interrupt-controller;
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
- ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
status = "disabled";
};
};
<0 0 0 2 &pcie2_intc 2>,
<0 0 0 3 &pcie2_intc 3>,
<0 0 0 4 &pcie2_intc 4>;
+ ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
pcie2_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
status = "disabled";
};
- qspi: qspi@4b300000 {
+ qspi: spi@4b300000 {
compatible = "ti,dra7xxx-qspi";
reg = <0x4b300000 0x100>,
<0x5c000000 0x4000000>;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <ðphy0>;
phy-mode = "rgmii";
};
+&davinci_mdio {
+ ethphy0: ethernet-phy@3 {
+ reg = <3>;
+ };
+};
+
&mmc1 {
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
pinctrl-0 = <&mmc1_pins_default>;
};
&cpsw_emac0 {
- phy_id = <&davinci_mdio>, <2>;
+ phy-handle = <&dp83867_0>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <1>;
};
&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <3>;
+ phy-handle = <&dp83867_1>;
phy-mode = "rgmii-id";
dual_emac_res_vlan = <2>;
};
compatible = "samsung,s2mps14-pmic";
interrupt-parent = <&gpx3>;
interrupts = <5 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps14_irq>;
reg = <0x66>;
s2mps14_osc: clocks {
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
samsung,pin-val = <1>;
};
+
+ s2mps14_irq: s2mps14-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};
&rtc {
reg = <0x66>;
interrupt-parent = <&gpx0>;
interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max8997_irq>;
max8997,pmic-buck1-dvs-voltage = <1350000>;
max8997,pmic-buck2-dvs-voltage = <1100000>;
};
};
+&pinctrl_1 {
+ max8997_irq: max8997-irq {
+ samsung,pins = "gpx0-3", "gpx0-4";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&sdhci_0 {
bus-width = <4>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
regulator-max-microvolt = <1800000>;
};
+ tflash_reg: LDO17 {
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
vddq_reg: LDO21 {
regulator-name = "VDDQ_M1M2_1.2V";
regulator-min-microvolt = <1200000>;
status = "okay";
};
+&sdhci_2 {
+ bus-width = <4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&tflash_reg>;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&serial_0 {
status = "okay";
};
pmic@66 {
compatible = "national,lp3974";
+ interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lp3974_irq>;
reg = <0x66>;
max8998,pmic-buck1-default-dvs-idx = <0>;
};
&pinctrl_1 {
+ lp3974_irq: lp3974-irq {
+ samsung,pins = "gpx0-7", "gpx2-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+
hdmi_hpd: hdmi-hpd {
samsung,pins = "gpx3-7";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
pinctrl-names = "default";
vmmc-supply = <&ldo5_reg>;
- cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
status = "okay";
};
&sdhci_2 {
bus-width = <4>;
- cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
pinctrl-names = "default";
vmmc-supply = <&ldo21_reg>;
pinctrl-names = "default";
vmmc-supply = <&ldo21_reg>;
vqmmc-supply = <&ldo4_reg>;
- cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
status = "okay";
};
};
};
+ panel: panel {
+ compatible = "boe,hv070wsa-100";
+ power-supply = <&vcc_3v3_reg>;
+ enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+ port {
+ panel_ep: endpoint {
+ remote-endpoint = <&bridge_out_ep>;
+ };
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
reg = <2>;
regulator-name = "hdmi-en";
};
+
+ vcc_1v2_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "VCC_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vcc_1v8_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3_reg: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
fixed-rate-clocks {
cpu0-supply = <&buck2_reg>;
};
+&dsi_0 {
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ samsung,pll-clock-frequency = <24000000>;
+ samsung,burst-clock-frequency = <320000000>;
+ samsung,esc-clock-frequency = <10000000>;
+ status = "okay";
+
+ bridge@0 {
+ reg = <0>;
+ compatible = "toshiba,tc358764";
+ vddc-supply = <&vcc_1v2_reg>;
+ vddio-supply = <&vcc_1v8_reg>;
+ vddlvds-supply = <&vcc_3v3_reg>;
+ reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ bridge_out_ep: endpoint {
+ remote-endpoint = <&panel_ep>;
+ };
+ };
+ };
+};
+
&dp {
status = "okay";
samsung,color-space = <0>;
};
&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd>;
status = "okay";
- ddc = <&i2c_2>;
- hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
+ ddc = <&i2c_ddc>;
+ hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
vdd_osc-supply = <&ldo10_reg>;
vdd_pll-supply = <&ldo8_reg>;
vdd-supply = <&ldo8_reg>;
reg = <0x66>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq>;
vinb1-supply = <&main_dc_reg>;
vinb2-supply = <&main_dc_reg>;
};
};
-&i2c_2 {
- status = "okay";
- /* used by HDMI DDC */
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
-};
-
&i2c_3 {
status = "okay";
cap-sd-highspeed;
};
+&pinctrl_0 {
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
+};
+
&rtc {
status = "okay";
};
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
+
+&soc {
+ /*
+ * For unknown reasons HDMI-DDC does not work with Exynos I2C
+ * controllers. Lets use software I2C over GPIO pins as a workaround.
+ */
+ i2c_ddc: i2c-gpio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_gpio_bus>;
+ status = "okay";
+ compatible = "i2c-gpio";
+ gpios = <&gpa0 6 0 /* sda */
+ &gpa0 7 0 /* scl */
+ >;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+ i2c2_gpio_bus: i2c2-gpio-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+ };
+
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
+
+ hdmi_hpd: hdmi-hpd {
+ samsung,pins = "gpx3-7";
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ };
};
&pinctrl_1 {
samsung,model = "Snow-I2S-MAX98090";
samsung,audio-codec = <&max98090>;
+
+ cpu {
+ sound-dai = <&i2s0 0>;
+ };
+
+ codec {
+ sound-dai = <&max98090 0>, <&hdmi>;
+ };
};
};
interrupt-parent = <&gpx0>;
pinctrl-names = "default";
pinctrl-0 = <&max98090_irq>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "mclk";
+ #sound-dai-cells = <1>;
};
};
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
- clock-frequency = <1700000000>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
- clock-latency = <140000>;
-
- operating-points = <
- 1700000 1300000
- 1600000 1250000
- 1500000 1225000
- 1400000 1200000
- 1300000 1150000
- 1200000 1125000
- 1100000 1100000
- 1000000 1075000
- 900000 1050000
- 800000 1025000
- 700000 1012500
- 600000 1000000
- 500000 975000
- 400000 950000
- 300000 937500
- 200000 925000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
- clock-frequency = <1700000000>;
clocks = <&clock CLK_ARM_CLK>;
clock-names = "cpu";
- clock-latency = <140000>;
-
- operating-points = <
- 1700000 1300000
- 1600000 1250000
- 1500000 1225000
- 1400000 1200000
- 1300000 1150000
- 1200000 1125000
- 1100000 1100000
- 1000000 1075000
- 900000 1050000
- 800000 1025000
- 700000 1012500
- 600000 1000000
- 500000 975000
- 400000 950000
- 300000 937500
- 200000 925000
- >;
+ operating-points-v2 = <&cpu0_opp_table>;
#cooling-cells = <2>; /* min followed by max */
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <925000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <937500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <950000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <1012500>;
+ clock-latency-ns = <140000>;
+ };
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1050000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1075000>;
+ clock-latency-ns = <140000>;
+ opp-suspend;
+ };
+ opp-1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1125000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1200000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1225000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
+ opp-1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1300000>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
soc: soc {
sysram@2020000 {
compatible = "mmio-sram";
#phy-cells = <0>;
};
+ mipi_phy: video-phy@10040710 {
+ compatible = "samsung,s5pv210-mipi-video-phy";
+ reg = <0x10040710 0x100>;
+ #phy-cells = <1>;
+ syscon = <&pmu_system_controller>;
+ };
+
+ dsi_0: dsi@14500000 {
+ compatible = "samsung,exynos4210-mipi-dsi";
+ reg = <0x14500000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ samsung,power-domain = <&pd_disp1>;
+ phys = <&mipi_phy 3>;
+ phy-names = "dsim";
+ clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
+ clock-names = "bus_clk", "sclk_mipi";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
adc: adc@12d10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
bus-width = <4>;
cap-sd-highspeed;
vmmc-supply = <&ldo21_reg>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
+ sd2_wp: sd2-wp {
+ samsung,pins = "gpm5-0";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ /* Pin is floating so be sure to disable write-protect */
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+ };
+
pmic_dvs_3: pmic-dvs-3 {
samsung,pins = "gpx0-0";
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
&clock_audss {
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-parents = <&clock CLK_MAU_EPLL>;
};
&cpu0 {
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-always-on;
};
+ ldo2_reg: LDO2 {
+ regulator-name = "vdd_ldo2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
ldo3_reg: LDO3 {
regulator-name = "vddq_mmc0";
regulator-min-microvolt = <1800000>;
};
ldo12_reg: LDO12 {
+ /* Unused */
regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
};
ldo13_reg: LDO13 {
regulator-max-microvolt = <2800000>;
};
+ ldo14_reg: LDO14 {
+ /* Unused */
+ regulator-name = "vdd_ldo14";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo15_reg: LDO15 {
regulator-name = "vdd_ldo15";
regulator-min-microvolt = <3300000>;
};
ldo16_reg: LDO16 {
+ /* Unused */
regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
};
ldo17_reg: LDO17 {
regulator-max-microvolt = <2800000>;
};
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
+ ldo20_reg: LDO20 {
+ /* Unused */
+ regulator-name = "vdd_ldo20";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo21_reg: LDO21 {
+ /* Unused */
+ regulator-name = "vdd_ldo21";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo22_reg: LDO22 {
+ /* Unused */
+ regulator-name = "vdd_ldo22";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "vdd_mifs";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
regulator-always-on;
};
+ ldo24_reg: LDO24 {
+ /* Unused */
+ regulator-name = "vdd_ldo24";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo25_reg: LDO25 {
+ /* Unused */
+ regulator-name = "vdd_ldo25";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
ldo26_reg: LDO26 {
+ /* Used on XU3, XU3-Lite and XU4 */
regulator-name = "vdd_ldo26";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "vdd_g3ds";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
};
+ ldo28_reg: LDO28 {
+ /* Used on XU3 */
+ regulator-name = "vdd_ldo28";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo29_reg: LDO29 {
+ /* Unused */
+ regulator-name = "vdd_ldo29";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo30_reg: LDO30 {
+ /* Unused */
+ regulator-name = "vdd_ldo30";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo31_reg: LDO31 {
+ /* Unused */
+ regulator-name = "vdd_ldo31";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo32_reg: LDO32 {
+ /* Unused */
+ regulator-name = "vdd_ldo32";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo33_reg: LDO33 {
+ /* Unused */
+ regulator-name = "vdd_ldo33";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo34_reg: LDO34 {
+ /* Unused */
+ regulator-name = "vdd_ldo34";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo35_reg: LDO35 {
+ /* Unused */
+ regulator-name = "vdd_ldo35";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <2375000>;
+ };
+
+ ldo36_reg: LDO36 {
+ /* Unused */
+ regulator-name = "vdd_ldo36";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo37_reg: LDO37 {
+ /* Unused */
+ regulator-name = "vdd_ldo37";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
+ ldo38_reg: LDO38 {
+ /* Unused */
+ regulator-name = "vdd_ldo38";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <800000>;
status = "okay";
};
+&ldo26_reg {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+};
+
&mixer {
status = "okay";
};
};
};
+&ldo28_reg {
+ regulator-name = "dp_p3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
&pwm {
/*
* PWM 0 -- fan
&clock_audss {
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
- assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-parents = <&clock CLK_MAU_EPLL>;
};
&cpu0 {
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb0_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator0_out_port0>;
+ in-ports {
+ port {
+ etb0_in_port: endpoint@0 {
+ remote-endpoint = <&replicator0_out_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb1_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator1_out_port0>;
+ in-ports {
+ port {
+ etb1_in_port: endpoint@0 {
+ remote-endpoint = <&replicator1_out_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb2_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator2_out_port0>;
+ in-ports {
+ port {
+ etb2_in_port: endpoint@0 {
+ remote-endpoint = <&replicator2_out_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- etb3_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&replicator3_out_port0>;
+ in-ports {
+ port {
+ etb3_in_port: endpoint@0 {
+ remote-endpoint = <&replicator3_out_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint@0 {
- slave-mode;
- remote-endpoint = <&funnel4_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint@0 {
+ remote-endpoint = <&funnel4_out_port0>;
+ };
};
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&funnel4_in_port0>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out_port0>;
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&funnel4_in_port1>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out_port0>;
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator2_out_port0: endpoint {
remote-endpoint = <&funnel4_in_port2>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel2_out_port0>;
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator3_out_port0: endpoint {
remote-endpoint = <&funnel4_in_port3>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel3_out_port0>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel0_out_port0: endpoint {
remote-endpoint =
<&replicator0_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel0_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel0_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel0_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm2_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel0_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm3_out_port>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel1_out_port0: endpoint {
remote-endpoint =
<&replicator1_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel1_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm4_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel1_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm5_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel1_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm6_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel1_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm7_out_port>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel2_out_port0: endpoint {
remote-endpoint =
<&replicator2_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel2_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm8_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel2_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm9_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel2_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm10_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel2_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm11_out_port>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel3_out_port0: endpoint {
remote-endpoint =
<&replicator3_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel3_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm12_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel3_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm13_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel3_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&ptm14_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel3_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&ptm15_out_port>;
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel4_out_port0: endpoint {
remote-endpoint = <&tpiu_in_port>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel4_in_port0: endpoint {
- slave-mode;
remote-endpoint =
<&replicator0_out_port1>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel4_in_port1: endpoint {
- slave-mode;
remote-endpoint =
<&replicator1_out_port1>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
funnel4_in_port2: endpoint {
- slave-mode;
remote-endpoint =
<&replicator2_out_port1>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
funnel4_in_port3: endpoint {
- slave-mode;
remote-endpoint =
<&replicator3_out_port1>;
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port1>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU2>;
- port {
- ptm2_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port2>;
+ out-ports {
+ port {
+ ptm2_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port2>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU3>;
- port {
- ptm3_out_port: endpoint {
- remote-endpoint = <&funnel0_in_port3>;
+ out-ports {
+ port {
+ ptm3_out_port: endpoint {
+ remote-endpoint = <&funnel0_in_port3>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU4>;
- port {
- ptm4_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port0>;
+ out-ports {
+ port {
+ ptm4_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU5>;
- port {
- ptm5_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port1>;
+ out-ports {
+ port {
+ ptm5_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port1>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU6>;
- port {
- ptm6_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port2>;
+ out-ports {
+ port {
+ ptm6_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port2>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU7>;
- port {
- ptm7_out_port: endpoint {
- remote-endpoint = <&funnel1_in_port3>;
+ out-ports {
+ port {
+ ptm7_out_port: endpoint {
+ remote-endpoint = <&funnel1_in_port3>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU8>;
- port {
- ptm8_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port0>;
+ out-ports {
+ port {
+ ptm8_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU9>;
- port {
- ptm9_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port1>;
+ out-ports {
+ port {
+ ptm9_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port1>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU10>;
- port {
- ptm10_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port2>;
+ out-ports {
+ port {
+ ptm10_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port2>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU11>;
- port {
- ptm11_out_port: endpoint {
- remote-endpoint = <&funnel2_in_port3>;
+ out-ports {
+ port {
+ ptm11_out_port: endpoint {
+ remote-endpoint = <&funnel2_in_port3>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU12>;
- port {
- ptm12_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port0>;
+ out-ports {
+ port {
+ ptm12_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port0>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU13>;
- port {
- ptm13_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port1>;
+ out-ports {
+ port {
+ ptm13_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port1>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU14>;
- port {
- ptm14_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port2>;
+ out-ports {
+ port {
+ ptm14_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port2>;
+ };
};
};
};
clocks = <&clk_375m>;
clock-names = "apb_pclk";
cpu = <&CPU15>;
- port {
- ptm15_out_port: endpoint {
- remote-endpoint = <&funnel3_in_port3>;
+ out-ports {
+ port {
+ ptm15_out_port: endpoint {
+ remote-endpoint = <&funnel3_in_port3>;
+ };
};
};
};
reg = <0x00210000 0x10000>;
ranges;
- cspi1: cspi@213000 {
+ cspi1: spi@213000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-cspi";
status = "disabled";
};
- cspi2: cspi@219000 {
+ cspi2: spi@219000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-cspi";
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
};
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx23-spi";
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
status = "okay";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_8bit_pins_a>;
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
status = "okay";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
compatible = "fsl,imx23-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_4bit_pins_a>;
status = "disabled";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
reg = <0x80010000 0x2000>;
interrupts = <15>;
clocks = <&clks 33>;
status = "disabled";
};
- ssp1: ssp@80034000 {
+ ssp1: spi@80034000 {
reg = <0x80034000 0x2000>;
interrupts = <2>;
clocks = <&clks 33>;
status = "disabled";
};
- spi1: cspi@43fa4000 {
+ spi1: spi@43fa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x50000000 0x40000>;
ranges;
- spi3: cspi@50004000 {
+ spi3: spi@50004000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
status = "disabled";
};
- cspi1: cspi@1000e000 {
+ cspi1: spi@1000e000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
status = "disabled";
};
- cspi2: cspi@1000f000 {
+ cspi2: spi@1000f000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
status = "disabled";
};
- cspi3: cspi@10017000 {
+ cspi3: spi@10017000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx27-cspi";
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
non-removable;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_b
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-spi";
pinctrl-names = "default";
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
status = "okay";
};
- ssp1: ssp@80012000 {
+ ssp1: spi@80012000 {
compatible = "fsl,imx28-mmc";
bus-width = <8>;
wp-gpios = <&gpio0 28 0>;
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
};
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_4bit_pins_a
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a>;
status = "okay";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-spi";
apb@80000000 {
apbh@80000000 {
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_4bit_pins_a
status = "disabled";
};
- ssp0: ssp@80010000 {
+ ssp0: spi@80010000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80010000 0x2000>;
status = "disabled";
};
- ssp1: ssp@80012000 {
+ ssp1: spi@80012000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80012000 0x2000>;
status = "disabled";
};
- ssp2: ssp@80014000 {
+ ssp2: spi@80014000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80014000 0x2000>;
status = "disabled";
};
- ssp3: ssp@80016000 {
+ ssp3: spi@80016000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80016000 0x2000>;
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
compatible = "fsl,imx31-cspi";
reg = <0x50010000 0x4000>;
interrupts = <13>;
#clock-cells = <1>;
};
- spi3: cspi@53f84000 {
+ spi3: spi@53f84000 {
compatible = "fsl,imx31-cspi";
reg = <0x53f84000 0x4000>;
interrupts = <17>;
status = "disabled";
};
- spi1: cspi@43fa4000 {
+ spi1: spi@43fa4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx35-cspi";
status = "disabled";
};
- spi2: cspi@50010000 {
+ spi2: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx35-cspi";
status = "disabled";
};
- ecspi1: ecspi@50010000 {
+ ecspi1: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@63fac000 {
+ ecspi2: spi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
};
- cspi: cspi@63fc0000 {
+ cspi: spi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,mc13xxx-uses-adc;
fsl,mc13xxx-uses-rtc;
regulators {
};
ds1341: rtc@68 {
- compatible = "maxim,ds1341";
+ compatible = "dallas,ds1341";
reg = <0x68>;
};
vcc-supply = <&vusb2_reg>;
};
+&vpu {
+ status = "disabled";
+};
+
+&wdog1 {
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
vcc-supply = <&vusb2_reg>;
};
+&vpu {
+ status = "disabled";
+};
+
&wdog1 {
status = "disabled";
};
status = "disabled";
};
- ecspi1: ecspi@70010000 {
+ ecspi1: spi@70010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@83fac000 {
+ ecspi2: spi@83fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-ecspi";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
};
- cspi: cspi@83fc0000 {
+ cspi: spi@83fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
status = "disabled";
};
- vpu@83ff4000 {
+ vpu: vpu@83ff4000 {
compatible = "fsl,imx51-vpu", "cnm,codahx4";
reg = <0x83ff4000 0x1000>;
interrupts = <9>;
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
- num-chipselects = <1>;
cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
status = "okay";
status = "disabled";
};
- ecspi1: ecspi@50010000 {
+ ecspi1: spi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@63fac000 {
+ ecspi2: spi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
- cspi: cspi@63fc0000 {
+ cspi: spi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
&ecspi4 {
status = "okay";
- mcp251x0: mcp251x@1 {
+ mcp251x0: mcp251x@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2018 Engicam S.r.l.
* Copyright (C) 2018 Amarula Solutions B.V.
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
status = "okay";
};
+&clks {
+ fsl,pmic-stby-poweroff;
+};
+
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
reg = <0x08>;
interrupt-parent = <&gpio5>;
interrupts = <16 8>;
+ fsl,pmic-stby-poweroff;
regulators {
reg_vddcore: sw1ab { /* VDDARM_IN */
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
};
&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2017 Engicam S.r.l.
* Copyright (C) 2017 Amarula Solutions B.V.
/dts-v1/;
#include "imx6q.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
/ {
- model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit";
+ model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Engicam S.r.l.
*/
/dts-v1/;
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
aips-bus@2000000 { /* AIPS1 */
spba-bus@2000000 {
- ecspi5: ecspi@2018000 {
+ ecspi5: spi@2018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
};
&iomuxc {
- /* pins used on module */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reset_moci>;
-
pinctrl_apalis_gpio1: gpio2io04grp {
fsl,pins = <
MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ */
+
+#include "imx6qdl-icore.dtsi"
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ >;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
+ phy-mode = "rmii";
+ status = "okay";
+};
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2015 Amarula Solutions B.V.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2015 Engicam S.r.l.
*/
#include <dt-bindings/gpio/gpio.h>
};
&iomuxc {
- pinctrl_audmux: audmux {
+ pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
};
&iomuxc {
- pinctrl_audmux: audmux {
+ pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
>;
};
- pinctrl_gpmi_nand: gpmi-nand {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
// Copyright 2011 Linaro Ltd.
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
/ {
chosen {
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ home {
+ label = "Home";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOME>;
+ wakeup-source;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ wakeup-source;
+ };
+
+ program {
+ label = "Program";
+ gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_PROGRAM>;
+ wakeup-source;
+ };
+
+ volume-up {
+ label = "Volume Up";
+ gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ };
+
+ volume-down {
+ label = "Volume Down";
+ gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ };
+ };
+
clocks {
codec_osc: anaclk2 {
compatible = "fixed-clock";
VLC-supply = <®_audio>;
};
+ touchscreen@4 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_egalax_int>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+ };
};
&i2c3 {
>;
};
+ pinctrl_egalax_int: egalax-intgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1
+ >;
+ };
+
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0
>;
};
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+ MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+ MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0
+ >;
+ };
+
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000
#include <dt-bindings/gpio/gpio.h>
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
sound {
compatible = "fsl,imx6-wandboard-sgtl5000",
"fsl,imx-audio-sgtl5000";
status = "okay";
};
+&snvs_rtc {
+ status = "disabled";
+};
+
&ssi1 {
status = "okay";
};
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi";
reg = <0x0209c000 0x4000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO1>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>;
};
gpio2: gpio@20a0000 {
reg = <0x020a0000 0x4000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO2>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 50 32>;
};
gpio3: gpio@20a4000 {
reg = <0x020a4000 0x4000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO3>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>,
+ <&iomuxc 16 101 2>, <&iomuxc 18 5 1>,
+ <&iomuxc 21 6 11>;
};
gpio4: gpio@20a8000 {
reg = <0x020a8000 0x4000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO4>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>,
+ <&iomuxc 16 151 1>, <&iomuxc 17 149 1>,
+ <&iomuxc 18 146 1>, <&iomuxc 19 144 1>,
+ <&iomuxc 20 142 1>, <&iomuxc 21 143 1>,
+ <&iomuxc 22 150 1>, <&iomuxc 23 148 1>,
+ <&iomuxc 24 147 1>, <&iomuxc 25 145 1>,
+ <&iomuxc 26 152 1>, <&iomuxc 27 125 1>,
+ <&iomuxc 28 131 1>, <&iomuxc 29 134 1>,
+ <&iomuxc 30 129 1>, <&iomuxc 31 133 1>;
};
gpio5: gpio@20ac000 {
reg = <0x020ac000 0x4000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO5>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>,
+ <&iomuxc 2 132 1>, <&iomuxc 3 130 1>,
+ <&iomuxc 4 127 1>, <&iomuxc 5 126 1>,
+ <&iomuxc 6 120 1>, <&iomuxc 7 123 1>,
+ <&iomuxc 8 118 1>, <&iomuxc 9 122 1>,
+ <&iomuxc 10 124 1>, <&iomuxc 11 117 1>,
+ <&iomuxc 12 121 1>, <&iomuxc 13 119 1>,
+ <&iomuxc 14 116 1>, <&iomuxc 15 115 1>,
+ <&iomuxc 16 140 2>, <&iomuxc 18 136 1>,
+ <&iomuxc 19 138 1>, <&iomuxc 20 139 1>,
+ <&iomuxc 21 137 1>;
};
gpio6: gpio@20b0000 {
reg = <0x020b0000 0x4000>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SLL_CLK_GPIO6>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
label = "Volume Up";
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
};
};
status = "disabled";
};
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- qspi1: qspi@21e0000 {
+ qspi1: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
status = "disabled";
};
- qspi2: qspi@21e4000 {
+ qspi2: spi@21e4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-qspi";
status = "disabled";
};
- ecspi5: ecspi@228c000 {
+ ecspi5: spi@228c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Digi International's ConnectCore6UL SBC Pro board device tree source
+ *
+ * Copyright 2018 Digi International, Inc.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6ul.dtsi"
+#include "imx6ul-ccimx6ulsom.dtsi"
+
+/ {
+ model = "Digi International ConnectCore 6UL SBC Pro.";
+ compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul";
+
+ lcd_backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm5 0 50000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc1>;
+ status = "okay";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <&ext_3v3>;
+ status = "okay";
+};
+
+/* CAN2 is multiplexed with UART2 RTS/CTS */
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <&ext_3v3>;
+ status = "disabled";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_master>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <26>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ smsc,disable-energy-detect;
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ smsc,disable-energy-detect;
+ reg = <1>;
+ };
+ };
+};
+
+&gpio5 {
+ emmc-usd-mux {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_LOW>;
+ output-high;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat0_17
+ &pinctrl_lcdif_clken
+ &pinctrl_lcdif_hvsync>;
+ lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */
+ status = "okay";
+};
+
+&ldo4_ext {
+ regulator-max-microvolt = <1800000>;
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm5>;
+ status = "okay";
+};
+
+&pwm6 {
+ status = "okay";
+};
+
+&pwm7 {
+ status = "okay";
+};
+
+&pwm8 {
+ status = "okay";
+};
+
+&sai2 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_sai2>;
+ pinctrl-1 = <&pinctrl_sai2_sleep>;
+ assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>,
+ <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>,
+ <&clks IMX6UL_CLK_SAI2>;
+ assigned-clock-rates = <0>, <786432000>, <12288000>;
+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
+ status = "okay";
+};
+
+/* UART2 RTS/CTS muxed with CAN2 */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_4wires>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+/* UART3 RTS/CTS muxed with CAN 1 */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_2wires>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "otg";
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+/* USDHC2 (microSD conflicts with eMMC) */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ broken-cd; /* no carrier detect line (use polling) */
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_adc1: adc1grp {
+ fsl,pins = <
+ /* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ >;
+ };
+
+ pinctrl_ecspi1_master: ecspi1grp1 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0
+ MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0
+ MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x10b0
+ MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40017051
+ >;
+ };
+
+ pinctrl_enet2_mdio: mdioenet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp{
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ >;
+ };
+ pinctrl_flexcan2: flexcan2grp{
+ fsl,pins = <
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ >;
+ };
+
+ pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
+ pinctrl_lcdif_clken: lcdifctrlgrp1 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ >;
+ };
+
+ pinctrl_lcdif_hvsync: lcdifctrlgrp2 {
+ fsl,pins = <
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_pwm5: pwm5grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__PWM5_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088
+ MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ /* Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10b0
+ >;
+ };
+
+ pinctrl_sai2_sleep: sai2grp-sleep {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000
+ MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000
+ MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x3000
+ MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x3000
+ /* Interrupt */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x3000
+ >;
+ };
+
+ pinctrl_uart2_4wires: uart2grp-4wires {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1
+ MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3_2wires: uart3grp-2wires {
+ fsl,pins = <
+ MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10039
+ MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059
+ MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059
+ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059
+ MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059
+ /* Mux selector between eMMC/SD# */
+ MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x79
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x17059
+ MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x17059
+ >;
+ };
+};
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
>;
};
- pinctrl_gpmi_nand: gpmi-nand {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
};
&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
- bus-width = <8>;
- no-1-8-v;
status = "okay";
};
-
-&iomuxc {
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
- MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
- MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
- MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
- MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
- MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
- MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
- MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
- MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
- MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
- MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
- >;
- };
-};
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
};
&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
status = "okay";
};
-
-&iomuxc {
- pinctrl_gpmi_nand: gpmi-nand {
- fsl,pins = <
- MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
- MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
- MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
- MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
- MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
- MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
- MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
- MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
- MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
- MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
- MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
- MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
- MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
- MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
- MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
- >;
- };
-};
+// SPDX-License-Identifier: GPL-2.0 OR X11
/*
* Copyright (C) 2016 Amarula Solutions B.V.
* Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
#include <dt-bindings/gpio/gpio.h>
};
};
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "disabled";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
status = "okay";
};
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
+ bus-width = <8>;
+ no-1-8-v;
+ status = "disabled";
+};
+
&iomuxc {
pinctrl_enet1: enet1grp {
fsl,pins = <
>;
};
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
+ >;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
>;
};
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070
+ >;
+ };
};
"pll1_sys";
arm-supply = <®_arm>;
soc-supply = <®_soc>;
+ nvmem-cells = <&cpu_speed_grade>;
+ nvmem-cell-names = "speed_grade";
};
};
compatible = "arm,cortex-a7-pmu";
interrupt-parent = <&gpc>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
};
soc {
reg = <0x02000000 0x40000>;
ranges;
- ecspi1: ecspi@2008000 {
+ ecspi1: spi@2008000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@200c000 {
+ ecspi2: spi@200c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@2010000 {
+ ecspi3: spi@2010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi4: ecspi@2014000 {
+ ecspi4: spi@2014000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
reg = <0x021b0000 0x4000>;
};
+ weim: weim@21b8000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6UL_CLK_EIM>;
+ fsl,weim-cs-gpr = <&gpr>;
+ status = "disabled";
+ };
+
ocotp: ocotp-ctrl@21bc000 {
#address-cells = <1>;
#size-cells = <1>;
tempmon_temp_grade: temp-grade@20 {
reg = <0x20 4>;
};
+
+ cpu_speed_grade: speed-grade@10 {
+ reg = <0x10 4>;
+ };
};
lcdif: lcdif@21c8000 {
status = "disabled";
};
- qspi: qspi@21e0000 {
+ qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
#include "imx6ul-14x14-evk.dtsi"
/ {
- model = "Freescale i.MX6 UlltraLite 14x14 EVK Board";
+ model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board";
compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
};
* The pin function ID is a tuple of
* <mux_reg conf_reg input_reg mux_mode input_val>
*/
+/* signals common for i.MX6UL and i.MX6ULL */
+#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX
+#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
+#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX
+#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
+#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS
+#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
+#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS
+#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
+#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS
+#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
+
+/* signals for i.MX6ULL only */
+#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084 0x0310 0x0000 0x9 0x0
#define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4
#define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5
-#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3
-#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4
-#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6
-#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7
-#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5
-#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6
+#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088 0x0314 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C 0x0318 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C 0x0318 0x0640 0x9 0x3
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090 0x031C 0x0640 0x9 0x4
+#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090 0x031C 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8 0x0344 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC 0x0348 0x0000 0x9 0x0
+#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0 0x034C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4 0x0350 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8 0x0354 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC 0x0358 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0 0x035C 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4 0x0360 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8 0x0364 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC 0x0368 0x0000 0x9 0x0
+#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0 0x036C 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0
#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0
#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0
#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0
#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170 0x03FC 0x0000 0x9 0x0
+#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174 0x0400 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0
-#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7
#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
>;
fsl,soc-operating-points = <
/* KHz uV */
- 900000 1175000
+ 900000 1250000
792000 1175000
528000 1175000
396000 1175000
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+/dts-v1/;
+
+#include "imx6ulz.dtsi"
+#include "imx6ul-14x14-evk.dtsi"
+
+/delete-node/ &fec1;
+/delete-node/ &fec2;
+/delete-node/ &lcdif;
+/delete-node/ &tsc;
+
+/ {
+ model = "Freescale i.MX6 ULZ 14x14 EVK Board";
+ compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz";
+
+ /delete-node/ panel;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2018 NXP.
+
+#include "imx6ull.dtsi"
+
+/ {
+ aliases {
+ /delete-property/ ethernet0;
+ /delete-property/ ethernet1;
+ /delete-property/ i2c2;
+ /delete-property/ i2c3;
+ /delete-property/ serial4;
+ /delete-property/ serial5;
+ /delete-property/ serial6;
+ /delete-property/ serial7;
+ /delete-property/ spi2;
+ /delete-property/ spi3;
+ };
+};
+
+/delete-node/ &adc1;
+/delete-node/ &can1;
+/delete-node/ &can2;
+/delete-node/ &ecspi3;
+/delete-node/ &ecspi4;
+/delete-node/ &epit2;
+/delete-node/ &gpt2;
+/delete-node/ &i2c3;
+/delete-node/ &i2c4;
+/delete-node/ &pwm5;
+/delete-node/ &pwm6;
+/delete-node/ &pwm7;
+/delete-node/ &pwm8;
+/delete-node/ &uart5;
+/delete-node/ &uart6;
+/delete-node/ &uart7;
+/delete-node/ &uart8;
label = "Volume Up";
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
};
volume-down {
label = "Volume Down";
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
};
};
reg = <1>;
clock-frequency = <996000000>;
operating-points-v2 = <&cpu0_opp_table>;
+ cpu-idle-states = <&cpu_sleep_wait>;
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm1_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port1>;
+ out-ports {
+ port {
+ etm1_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port1>;
+ };
};
};
};
};
};
-&ca_funnel_ports {
+&ca_funnel_in_ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port@1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out_port>;
};
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2016 NXP Semiconductors.
* Author: Fabio Estevam <fabio.estevam@nxp.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
status = "okay";
};
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
&i2c4 {
clock-frequency = <100000>;
pinctrl-names = "default";
>;
};
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f
+ MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f
+ >;
+ };
+
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f
#address-cells = <1>;
#size-cells = <0>;
+ idle-states {
+ entry-method = "psci";
+
+ cpu_sleep_wait: cpu-sleep-wait {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <100>;
+ exit-latency-us = <50>;
+ min-residency-us = <1000>;
+ };
+ };
+
cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
clock-frequency = <792000000>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX7D_CLK_ARM>;
+ cpu-idle-states = <&cpu_sleep_wait>;
};
};
*/
compatible = "arm,coresight-replicator";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
/* replicator output ports */
remote-endpoint = <&etr_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etf_out_port>;
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ca_funnel_ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel input ports */
- port@0 {
- reg = <0>;
+ ca_funnel_in_ports: in-ports {
+ port {
ca_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out_port>;
};
};
- /* funnel output port */
- port@2 {
- reg = <0>;
+ /* the other input ports are not connect to anything */
+ };
+
+ out-ports {
+ port {
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
};
- /* the other input ports are not connect to anything */
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port0>;
+ out-ports {
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
};
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* funnel input ports */
port@0 {
reg = <0>;
hugo_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ca_funnel_out_port0>;
};
};
port@1 {
reg = <1>;
hugo_funnel_in_port1: endpoint {
- slave-mode; /* M4 input */
+ /* M4 input */
};
};
+ /* the other input ports are not connect to anything */
+ };
- port@2 {
- reg = <0>;
+ out-ports {
+ port {
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
-
- /* the other input ports are not connect to anything */
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in_port: endpoint {
- slave-mode;
remote-endpoint = <&hugo_funnel_out_port0>;
};
};
+ };
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
clock-names = "snvs-rtc";
};
- snvs_poweroff: snvs-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&snvs>;
- offset = <0x38>;
- value = <0x60>;
- mask = <0x60>;
- };
-
snvs_pwrkey: snvs-powerkey {
compatible = "fsl,sec-v4.0-pwrkey";
regmap = <&snvs>;
status = "disabled";
};
- ecspi4: ecspi@30630000 {
+ ecspi4: spi@30630000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
reg = <0x30800000 0x100000>;
ranges;
- ecspi1: ecspi@30820000 {
+ ecspi1: spi@30820000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi2: ecspi@30830000 {
+ ecspi2: spi@30830000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
- ecspi3: ecspi@30840000 {
+ ecspi3: spi@30840000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
status = "disabled";
};
+ mu0a: mailbox@30aa0000 {
+ compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+ reg = <0x30aa0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_MU_ROOT_CLK>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ mu0b: mailbox@30ab0000 {
+ compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu";
+ reg = <0x30ab0000 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_MU_ROOT_CLK>;
+ #mbox-cells = <2>;
+ fsl,mu-side-b;
+ status = "disabled";
+ };
+
usbotg1: usb@30b10000 {
compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
reg = <0x30b10000 0x200>;
#define IMX7ULP_PAD_PTC13__LPI2C7_SDA 0x0034 0x030c 0x5 0x1
#define IMX7ULP_PAD_PTC13__TPM7_CLKIN 0x0034 0x02f4 0x6 0x1
#define IMX7ULP_PAD_PTC13__FB_AD13 0x0034 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC13__USB0_ID 0x0034 0x0338 0xb 0x1
#define IMX7ULP_PAD_PTC14__PTC14 0x0038 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC14__TRACE_D1 0x0038 0x0000 0xa 0x0
#define IMX7ULP_PAD_PTC14__FXIO1_D10 0x0038 0x022c 0x2 0x1
#define IMX7ULP_PAD_PTC16__LPSPI3_SIN 0x0040 0x0324 0x3 0x1
#define IMX7ULP_PAD_PTC16__TPM7_CH2 0x0040 0x02e4 0x6 0x1
#define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B 0x0040 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC16__USB1_OC2 0x0040 0x0334 0xb 0x1
#define IMX7ULP_PAD_PTC17__PTC17 0x0044 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC17__FXIO1_D13 0x0044 0x0238 0x2 0x1
#define IMX7ULP_PAD_PTC17__LPSPI3_SOUT 0x0044 0x0328 0x3 0x1
#define IMX7ULP_PAD_PTC18__LPSPI3_SCK 0x0048 0x0320 0x3 0x1
#define IMX7ULP_PAD_PTC18__TPM6_CH0 0x0048 0x02d0 0x6 0x1
#define IMX7ULP_PAD_PTC18__FB_OE_B 0x0048 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC18__USB0_ID 0x0048 0x0338 0xb 0x2
+#define IMX7ULP_PAD_PTC18__VIU_DE 0x0048 0x033c 0xc 0x1
#define IMX7ULP_PAD_PTC19__PTC19 0x004c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTC19__FXIO1_D15 0x004c 0x0240 0x2 0x1
#define IMX7ULP_PAD_PTC19__LPSPI3_PCS0 0x004c 0x0310 0x3 0x1
#define IMX7ULP_PAD_PTC19__TPM6_CH1 0x004c 0x02d4 0x6 0x1
#define IMX7ULP_PAD_PTC19__FB_A16 0x004c 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTC19__USB0_ID 0x004c 0x0338 0xa 0x3
+#define IMX7ULP_PAD_PTC19__USB1_PWR2 0x004c 0x0000 0xb 0x0
+#define IMX7ULP_PAD_PTC19__VIU_DE 0x004c 0x033c 0xc 0x3
#define IMX7ULP_PAD_PTD0__PTD0 0x0080 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTD0__SDHC0_RESET_B 0x0080 0x0000 0x8 0x0
#define IMX7ULP_PAD_PTD1__PTD1 0x0084 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE5__LPI2C5_SDA 0x0114 0x02c0 0x5 0x2
#define IMX7ULP_PAD_PTE5__TPM5_CH0 0x0114 0x02c4 0x6 0x2
#define IMX7ULP_PAD_PTE5__SDHC1_D2 0x0114 0x0000 0x8 0x0
+#define IMX7ULP_PAD_PTE5__VIU_DE 0x0114 0x033c 0xc 0x2
#define IMX7ULP_PAD_PTE6__PTE6 0x0118 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE6__FXIO1_D25 0x0118 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE6__LPSPI2_SCK 0x0118 0x02ac 0x3 0x2
#define IMX7ULP_PAD_PTE6__TPM7_CH3 0x0118 0x02e8 0x6 0x2
#define IMX7ULP_PAD_PTE6__SDHC1_D4 0x0118 0x0000 0x8 0x0
#define IMX7ULP_PAD_PTE6__FB_A17 0x0118 0x0000 0x9 0x0
+#define IMX7ULP_PAD_PTE6__USB0_OC 0x0118 0x0330 0xb 0x1
#define IMX7ULP_PAD_PTE7__PTE7 0x011c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE7__TRACE_D7 0x011c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE7__USB0_PWR 0x011c 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE7__VIU_FID 0x011c 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE7__FXIO1_D24 0x011c 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE7__LPSPI2_PCS0 0x011c 0x029c 0x3 0x2
#define IMX7ULP_PAD_PTE11__FB_A20 0x012c 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE12__PTE12 0x0130 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE12__TRACE_D2 0x0130 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE12__USB1_OC2 0x0130 0x0334 0xb 0x2
#define IMX7ULP_PAD_PTE12__VIU_D20 0x0130 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE12__FXIO1_D19 0x0130 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE12__LPSPI3_SIN 0x0130 0x0324 0x3 0x2
#define IMX7ULP_PAD_PTE12__FB_A21 0x0130 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE13__PTE13 0x0134 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE13__TRACE_D1 0x0134 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE13__USB1_PWR2 0x0134 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE13__VIU_D21 0x0134 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE13__FXIO1_D18 0x0134 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE13__LPSPI3_SOUT 0x0134 0x0328 0x3 0x2
#define IMX7ULP_PAD_PTE13__FB_A22 0x0134 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE14__PTE14 0x0138 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE14__TRACE_D0 0x0138 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE14__USB0_OC 0x0138 0x0330 0xb 0x2
#define IMX7ULP_PAD_PTE14__VIU_D22 0x0138 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE14__FXIO1_D17 0x0138 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE14__LPSPI3_SCK 0x0138 0x0320 0x3 0x2
#define IMX7ULP_PAD_PTE14__FB_A23 0x0138 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTE15__PTE15 0x013c 0x0000 0x1 0x0
#define IMX7ULP_PAD_PTE15__TRACE_CLKOUT 0x013c 0x0000 0xa 0x0
+#define IMX7ULP_PAD_PTE15__USB0_PWR 0x013c 0x0000 0xb 0x0
#define IMX7ULP_PAD_PTE15__VIU_D23 0x013c 0x0000 0xc 0x0
#define IMX7ULP_PAD_PTE15__FXIO1_D16 0x013c 0x0000 0x2 0x0
#define IMX7ULP_PAD_PTE15__LPSPI3_PCS0 0x013c 0x0310 0x3 0x2
#define IMX7ULP_PAD_PTE15__TPM6_CH1 0x013c 0x02d4 0x6 0x2
#define IMX7ULP_PAD_PTE15__FB_A24 0x013c 0x0000 0x9 0x0
#define IMX7ULP_PAD_PTF0__PTF0 0x0180 0x0000 0x1 0x0
-#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x0000 0xc 0x0
+#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x033c 0xc 0x0
#define IMX7ULP_PAD_PTF0__LPUART4_CTS_B 0x0180 0x0244 0x4 0x3
#define IMX7ULP_PAD_PTF0__LPI2C4_SCL 0x0180 0x0278 0x5 0x3
#define IMX7ULP_PAD_PTF0__TPM4_CLKIN 0x0180 0x0298 0x6 0x3
clock-frequency = <100000000>;
};
-&pciec {
- status = "okay";
-};
-
&pfc {
can0_pins: can0 {
groups = "can0_data_d";
clock-names = "fck", "mmchsdb_fck";
};
- qspi: qspi@2940000 {
+ qspi: spi@2940000 {
compatible = "ti,k2g-qspi", "cdns,qspi-nor";
#address-cells = <1>;
#size-cells = <0>;
* ssp0 and spi1 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp0: ssp@20084000 {
+ ssp0: spi@20084000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x20084000 0x1000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
* ssp1 and spi2 are shared pins;
* enable one in your board dts, as needed.
*/
- ssp1: ssp@2008c000 {
+ ssp1: spi@2008c000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x2008c000 0x1000>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
/*
* Copyright 2013-2014 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
big-endian;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
};
};
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 39>, <&edma0 1 38>;
status = "disabled";
};
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 37>, <&edma0 1 36>;
status = "disabled";
};
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
clocks = <&clockgen 4 1>;
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 35>, <&edma0 1 34>;
status = "disabled";
};
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "meson8b.dtsi"
+
+/ {
+ model = "Endless Computers Endless Mini";
+ compatible = "endless,ec100", "amlogic,meson8b";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ pal-switch {
+ label = "pal";
+ linux,input-type = <EV_SW>;
+ linux,code = <KEY_SWITCHVIDEOMODE>;
+ gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
+ };
+
+ ntsc-switch {
+ label = "ntsc";
+ linux,input-type = <EV_SW>;
+ linux,code = <KEY_SWITCHVIDEOMODE>;
+ gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
+ };
+
+ power-button {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ /*
+ * shutdown is managed by the EC (embedded micro-controller)
+ * which is configured through GPIOAO_2 (poweroff GPIO) and
+ * GPIOAO_7 (power LED, which has to go LOW as well).
+ */
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+ timeout-ms = <20000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "ec100:red:power";
+ /*
+ * Needs to go LOW (together with the poweroff GPIO)
+ * during shutdown to allow the EC (embedded
+ * micro-controller) to shutdown the system. Setting
+ * the output to LOW signals the EC to start a
+ * "breathing"/pulsing effect until the power is fully
+ * turned off.
+ */
+ gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ usb_vbus: regulator-usb-vbus {
+ compatible = "regulator-fixed";
+
+ regulator-name = "USB_VBUS";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vcc_5v: regulator-vcc5v {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC5V";
+
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcck: regulator-vcck {
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ pwms = <&pwm_cd 0 1148 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vcc_3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
+};
+
+ðmac {
+ status = "okay";
+
+ pinctrl-0 = <ð_rmii_pins>;
+ pinctrl-names = "default";
+
+ phy-handle = <ð_phy0>;
+ phy-mode = "rmii";
+
+ snps,reset-gpio = <&gpio GPIOH_4 0>;
+ snps,reset-delays-us = <0 10000 1000000>;
+ snps,reset-active-low;
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy0: ethernet-phy@0 {
+ /* IC Plus IP101A/G (0x02430c54) */
+ reg = <0>;
+ };
+ };
+};
+
+&i2c_A {
+ status = "okay";
+ pinctrl-0 = <&i2c_a_pins>;
+ pinctrl-names = "default";
+
+ rt5640: codec@1c {
+ compatible = "realtek,rt5640";
+ reg = <0x1c>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
+ realtek,in1-differential;
+ };
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdio {
+ status = "okay";
+
+ pinctrl-0 = <&sd_b_pins>;
+ pinctrl-names = "default";
+
+ /* SD card */
+ sd_card_slot: slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ status = "okay";
+
+ bus-width = <4>;
+ no-sdio;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ cd-inverted;
+
+ vmmc-supply = <&vcc_3v3>;
+ };
+};
+
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_XTAL>;
+ clock-names = "clkin0";
+};
+
+/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+/*
+ * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
+ * combo chip. This is only available on the variant with 2GB RAM.
+ */
+&uart_B {
+ status = "okay";
+ pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&usb1 {
+ status = "okay";
+ vbus-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+ status = "okay";
+};
mmc0 = &sd_card_slot;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
memory {
reg = <0x40000000 0x40000000>;
};
};
};
+ p5v0: regulator-p5v0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "P5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
tflash_vdd: regulator-tflash_vdd {
/*
* signal name from schematics: TFLASH_VDD_EN
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+
gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_3v3>;
+
/*
* signal name from schematics: TF_3V3N_1V8_EN
*/
states = <3300000 0
1800000 1>;
};
+
+ vcc_1v8: regulator-vcc-1v8 {
+ /*
+ * RICHTEK RT9179 configured for a fixed output voltage of
+ * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and
+ * VDD1V8 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vcc_3v3: regulator-vcc-3v3 {
+ /*
+ * Monolithic Power Systems MP2161 configured for a fixed
+ * output voltage of 3.3V. This supplies not only VCC3V3 but
+ * also VDD3V3 and VDDIO_AO3V3 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vcck: regulator-vcck {
+ /* Monolithic Power Systems MP2161 */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VCCK";
+ regulator-min-microvolt = <860000>;
+ regulator-max-microvolt = <1140000>;
+
+ vin-supply = <&p5v0>;
+
+ pwms = <&pwm_cd 0 12218 0>;
+ pwm-dutycycle-range = <91 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddc_ddr: regulator-vddc-ddr {
+ /*
+ * Monolithic Power Systems MP2161 configured for a fixed
+ * output voltage of 1.5V. This supplies not only DDR_VDDC but
+ * also DDR3_1V5 according to the schematics.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "DDR_VDDC";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ vin-supply = <&p5v0>;
+ };
+
+ vdd_rtc: regulator-vdd-rtc {
+ /*
+ * Torex Semiconductor XC6215 configured for a fixed output of
+ * 0.9V.
+ */
+ compatible = "regulator-fixed";
+
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ vin-supply = <&vcc_3v3>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vcck>;
};
ðmac {
pinctrl-names = "default";
};
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
&sdio {
status = "okay";
};
};
+&pwm_cd {
+ status = "okay";
+ pinctrl-0 = <&pwm_c1_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_XTAL>;
+ clock-names = "clkin0";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
#clock-cells = <1>;
#reset-cells = <1>;
compatible = "amlogic,meson8b-clkc";
- reg = <0x8000 0x4>, <0x4000 0x460>;
+ reg = <0x8000 0x4>, <0x4000 0x400>;
};
reset: reset-controller@4404 {
};
};
+ eth_rmii_pins: eth-rmii {
+ mux {
+ groups = "eth_tx_en",
+ "eth_txd1_0",
+ "eth_txd0_0",
+ "eth_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd1",
+ "eth_rxd0",
+ "eth_mdio_en",
+ "eth_mdc";
+ function = "ethernet";
+ };
+ };
+
+ i2c_a_pins: i2c-a {
+ mux {
+ groups = "i2c_sda_a", "i2c_sck_a";
+ function = "i2c_a";
+ };
+ };
+
sd_b_pins: sd-b {
mux {
groups = "sd_d0_b", "sd_d1_b", "sd_d2_b",
function = "sd_b";
};
};
+
+ pwm_c1_pins: pwm-c1 {
+ mux {
+ groups = "pwm_c1";
+ function = "pwm_c";
+ };
+ };
+
+ uart_b0_pins: uart-b0 {
+ mux {
+ groups = "uart_tx_b0",
+ "uart_rx_b0";
+ function = "uart_b";
+ };
+ };
+
+ uart_b0_cts_rts_pins: uart-b0-cts-rts {
+ mux {
+ groups = "uart_cts_b0",
+ "uart_rts_b0";
+ function = "uart_b";
+ };
+ };
};
};
#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/memory/mt2701-larb-port.h>
#include <dt-bindings/reset/mt2701-resets.h>
#include <dt-bindings/thermal/thermal.h>
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
system_clk: dummy13m {
compatible = "fixed-clock";
clock-frequency = <13000000>;
clock-names = "system-clk", "rtc-clk";
};
+ smi_common: smi@1000c000 {
+ compatible = "mediatek,mt7623-smi-common",
+ "mediatek,mt2701-smi-common";
+ reg = <0 0x1000c000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_SMI>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&infracfg CLK_INFRA_SMI>;
+ clock-names = "apb", "smi", "async";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
pwrap: pwrap@1000d000 {
compatible = "mediatek,mt7623-pwrap",
"mediatek,mt2701-pwrap";
reg = <0 0x10200100 0 0x1c>;
};
+ iommu: mmsys_iommu@10205000 {
+ compatible = "mediatek,mt7623-m4u",
+ "mediatek,mt2701-m4u";
+ reg = <0 0x10205000 0 0x1000>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_M4U>;
+ clock-names = "bclk";
+ mediatek,larbs = <&larb0 &larb1 &larb2>;
+ #iommu-cells = <1>;
+ };
+
efuse: efuse@10206000 {
compatible = "mediatek,mt7623-efuse",
"mediatek,mt8173-efuse";
status = "disabled";
};
+ g3dsys: syscon@13000000 {
+ compatible = "mediatek,mt7623-g3dsys",
+ "mediatek,mt2701-g3dsys",
+ "syscon";
+ reg = <0 0x13000000 0 0x200>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt7623-mmsys",
+ "mediatek,mt2701-mmsys",
+ "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb0: larb@14010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x14010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <0>;
+ clocks = <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB0>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
+ };
+
+ imgsys: syscon@15000000 {
+ compatible = "mediatek,mt7623-imgsys",
+ "mediatek,mt2701-imgsys",
+ "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb2: larb@15001000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x15001000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <2>;
+ clocks = <&imgsys CLK_IMG_SMI_COMM>,
+ <&imgsys CLK_IMG_SMI_COMM>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ };
+
+ jpegdec: jpegdec@15004000 {
+ compatible = "mediatek,mt7623-jpgdec",
+ "mediatek,mt2701-jpgdec";
+ reg = <0 0x15004000 0 0x1000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
+ <&imgsys CLK_IMG_JPGDEC>;
+ clock-names = "jpgdec-smi",
+ "jpgdec";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+ mediatek,larb = <&larb2>;
+ iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+ <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt7623-vdecsys",
+ "mediatek,mt2701-vdecsys",
+ "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ larb1: larb@16010000 {
+ compatible = "mediatek,mt7623-smi-larb",
+ "mediatek,mt2701-smi-larb";
+ reg = <0 0x16010000 0 0x1000>;
+ mediatek,smi = <&smi_common>;
+ mediatek,larb-id = <1>;
+ clocks = <&vdecsys CLK_VDEC_CKGEN>,
+ <&vdecsys CLK_VDEC_LARB>;
+ clock-names = "apb", "smi";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
+ };
+
hifsys: syscon@1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
status = "disabled";
};
+
+ bdpsys: syscon@1c000000 {
+ compatible = "mediatek,mt7623-bdpsys",
+ "mediatek,mt2701-bdpsys",
+ "syscon";
+ reg = <0 0x1c000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
};
&pio {
dma-names = "tx", "rx";
};
- mcspi1: mcspi@48098000 {
+ mcspi1: spi@48098000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi1";
reg = <0x48098000 0x100>;
"tx2", "rx2", "tx3", "rx3";
};
- mcspi2: mcspi@4809a000 {
+ mcspi2: spi@4809a000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi2";
reg = <0x4809a000 0x100>;
ti,timer-alwon;
};
- mcspi3: mcspi@480b8000 {
+ mcspi3: spi@480b8000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi3";
reg = <0x480b8000 0x100>;
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
clocks = <&emu_src_ck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
/dts-v1/;
#include "omap36xx.dtsi"
+#include <dt-bindings/input/input.h>
/ {
model = "OMAP3 GTA04";
aliases {
display0 = &lcd;
+ display1 = &tv0;
};
/* fixed 26MHz oscillator */
aux-button {
label = "aux";
- linux,code = <169>;
+ linux,code = <KEY_PHONE>;
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
+ antenna-detect {
+ compatible = "gpio-keys";
+
+ gps_antenna_button: gps-antenna-button {
+ label = "GPS_EXT_ANT";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LINEIN_INSERT>;
+ gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
sound {
compatible = "ti,omap-twl4030";
ti,model = "gta04";
ti,mcbsp = <&mcbsp2>;
};
- /* GSM audio */
+ /* GSM audio */
sound_telephony {
compatible = "simple-audio-card";
simple-audio-card,name = "GTA04 voice";
#sound-dai-cells = <0>;
};
- spi_lcd {
+ spi_lcd: spi_lcd {
compatible = "spi-gpio";
#address-cells = <0x1>;
#size-cells = <0x0>;
};
tv0: connector {
- compatible = "svideo-connector";
+ compatible = "composite-video-connector";
label = "tv";
port {
tv_amp: opa362 {
compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */
ports {
#address-cells = <1>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
};
+
+ /* devconf0 setup for mcbsp1 clock pins */
+ pinmux_mcbsp1@48002274 {
+ compatible = "pinctrl-single";
+ reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_devconf0_pins>;
+ mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */
+ };
+ };
+
+ /* devconf1 setup for tvout pins */
+ pinmux_tv_out@480022d8 {
+ compatible = "pinctrl-single";
+ reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x81>; /* TV out pin control */
+ #pinctrl-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tv_acbias_devconf1_pins>;
+ tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins {
+ /* offset bits mask */
+ pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */
+ };
+ };
};
&omap3_pmx_core {
>;
};
- backlight_pins: backlight_pins_pimnux {
+ backlight_pins: backlight_pins_pinmux {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
- pinctrl-single,pins = <
+ pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
>;
};
+ bmp085_pins: pinmux_bmp085_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */
+ >;
+ };
+
bma180_pins: pinmux_bma180_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
>;
};
+
+ penirq_pins: pinmux_penirq_pins {
+ pinctrl-single,pins = <
+ /* here we could enable to wakeup the cpu from suspend by a pen touch */
+ OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+ >;
+ };
+
+ camera_pins: pinmux_camera_pins {
+ pinctrl-single,pins = <
+ /* set up parallel camera interface */
+ OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */
+ OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */
+ OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */
+ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */
+ OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */
+ OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */
+ OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */
+ OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */
+ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */
+ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */
+ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */
+ OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */
+ OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */
+ OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */
+ OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */
+ OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */
+ OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */
+ OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */
+ OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */
+ >;
+ };
+
+ mcbsp1_pins: pinmux_mcbsp1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */
+ OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */
+ OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */
+ OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */
+ /* mcbsp_clks is used as PENIRQ */
+ /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */
+ OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */
+ OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */
+ >;
+ };
+
+ mcbsp3_pins: pinmux_mcbsp3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */
+ >;
+ };
+
+ mcbsp4_pins: pinmux_mcbsp4_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */
+ OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */
+ OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */
+ >;
+ };
};
&omap3_pmx_core2 {
bmp085@77 {
compatible = "bosch,bmp085";
reg = <0x77>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bmp085_pins>;
interrupt-parent = <&gpio4>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
};
reg = <0x4>;
};
- wifi_reset: wifi_reset@6 {
+ wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
reg = <0x6>;
compatible = "gpio";
};
tsc2007@48 {
compatible = "ti,tsc2007";
reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio6>;
interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
- gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */
ti,x-plate-ohms = <600>;
+ touchscreen-size-x = <480>;
+ touchscreen-size-y = <640>;
+ touchscreen-max-pressure = <1000>;
+ touchscreen-fuzz-x = <3>;
+ touchscreen-fuzz-y = <8>;
+ touchscreen-fuzz-pressure = <10>;
+ touchscreen-inverted-y;
};
/* RFID EEPROM */
vmmc-supply = <&vmmc1>;
bus-width = <4>;
ti,non-removable;
+ broken-cd; /* hardware has no CD */
};
&mmc2 {
status = "disabled";
};
+#define BIT(x) (1 << (x))
+&twl_gpio {
+ /* pullups: BIT(2) */
+ ti,pullups = <BIT(2)>;
+ /*
+ * pulldowns:
+ * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13)
+ * BIT(15), BIT(16), BIT(17)
+ */
+ ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) |
+ BIT(13) | BIT(15) | BIT(16) | BIT(17))>;
+};
+
&twl_keypad {
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
+ interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
&charger {
&vaux2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
+ regulator-always-on; /* we should never switch off while vio is on! */
};
/* camera */
regulator-max-microvolt = <3150000>;
};
+/* Needed to power the DPI pins */
+
+&vpll2 {
+ regulator-always-on;
+};
+
&dss {
pinctrl-names = "default";
pinctrl-0 = < &dss_dpi_pins >;
vdda-supply = <&vdac>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port {
+ reg = <0>;
venc_out: endpoint {
remote-endpoint = <&opa_in>;
- ti,channels = <2>;
+ ti,channels = <1>;
ti,invert-polarity;
};
};
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
+ ti,nand-ecc-opt = "ham1";
+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
+ #address-cells = <1>;
+ #size-cells = <1>;
- gpmc,sync-clk-ps = <0>;
+ gpmc,device-width = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
gpmc,oe-off-ns = <54>;
+ gpmc,we-off-ns = <40>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
- gpmc,device-width = <2>;
-
- #address-cells = <1>;
- #size-cells = <1>;
+ gpmc,sync-clk-ps = <0>;
x-loader@0 {
label = "X-Loader";
bootloaders@80000 {
label = "U-Boot";
- reg = <0x80000 0x1e0000>;
+ reg = <0x80000 0x1c0000>;
};
- bootloaders_env@260000 {
+ bootloaders_env@240000 {
label = "U-Boot Env";
- reg = <0x260000 0x20000>;
+ reg = <0x240000 0x40000>;
};
kernel@280000 {
label = "Kernel";
- reg = <0x280000 0x400000>;
+ reg = <0x280000 0x600000>;
};
- filesystem@680000 {
+ filesystem@880000 {
label = "File System";
- reg = <0x680000 0xf980000>;
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
};
};
};
-&mcbsp2 {
- status = "okay";
+&mcbsp1 { /* FM Transceiver PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 { /* TPS65950 I2S */
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&mcbsp3 { /* Bluetooth PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp3_pins>;
+};
+
+&mcbsp4 { /* GSM voice PCM */
+ status = "ok";
+ #sound-dai-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp4_pins>;
};
&hdqw1w {
pinctrl-0 = <&hdq_pins>;
};
-&mcbsp4 {
- status = "okay";
+/* image signal processor within OMAP3 SoC */
+&isp {
+ ports {
+ port@0 {
+ reg = <0>;
+ parallel_ep: endpoint {
+ ti,isp-clock-divisor = <1>;
+ ti,strobe-mode;
+ bus-width = <8>;/* Used data lines */
+ data-shift = <2>; /* Lines 9:2 are used */
+ hsync-active = <0>; /* Active low */
+ vsync-active = <1>; /* Active high */
+ data-active = <1>;/* Active high */
+ pclk-sample = <1>;/* Falling */
+ };
+ };
+ /* port@1 and port@2 are not used by GTA04 */
+ };
};
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A3";
+ model = "Goldelico GTA04A3/Letux 2804";
};
&i2c2 {
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A4";
+ model = "Goldelico GTA04A4/Letux 2804";
};
/*
- * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com>
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include "omap3-gta04.dtsi"
/ {
- model = "Goldelico GTA04A5";
+ model = "Goldelico GTA04A5/Letux 2804";
sound {
- ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
+ ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */
+ };
+
+ wlan_en: wlan_en_regulator {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_pins>;
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */
+
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
+ pps {
+ compatible = "pps-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pps_pins>;
+
+ gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */
+ };
+
+};
+
+&gpio5 {
+ irda_en {
+ gpio-hog;
+ gpios = <(175-160) GPIO_ACTIVE_HIGH>;
+ output-high; /* activate gpio_175 to disable IrDA receiver */
+ };
+};
+
+&omap3_pmx_core {
+ bt_pins: pinmux_bt_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */
+ >;
+ };
+
+ wlan_pins: pinmux_wlan_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */
+ >;
+ };
+
+ wlan_irq_pin: pinmux_wlan_irq_pin {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */
+ >;
+ };
+
+ irda_pins: pinmux_irda {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */
+ >;
+ };
+
+ pps_pins: pinmux_pps_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */
+ >;
+ };
+
+};
+
+/*
+ * for WL183x module see
+ * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt
+ */
+
+&wifi_pwrseq {
+ /delete-property/ reset-gpios;
+};
+
+&mmc2 {
+ vmmc-supply = <&wlan_en>;
+ bus-width = <4>;
+ cap-power-off-card;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_irq_pin>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /delete-property/ mmc-pwrseq;
+
+ wlcore: wlcore@2 {
+ compatible = "ti,wl1837";
+ reg = <2>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */
+ ref-clock-frequency = <26000000>;
+ };
+};
+
+&i2c2 {
+ /delete-node/ bmp085@77;
+ /delete-node/ bma180@41;
+ /delete-node/ itg3200@68;
+ /delete-node/ hmc5843@1e;
+
+ bmg160@69 {
+ compatible = "bosch,bmg160";
+ reg = <0x69>;
+ };
+
+ bmc150@10 {
+ compatible = "bosch,bmc150_accel";
+ reg = <0x10>;
+ };
+
+ bmc150@12 {
+ compatible = "bosch,bmc150_magn";
+ reg = <0x12>;
+ };
+
+ bme280@76 {
+ compatible = "bosch,bme280";
+ reg = <0x76>;
};
};
--- /dev/null
+/*
+ * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-gta04a5.dts"
+
+&omap3_pmx_core {
+ model = "Goldelico GTA04A5/Letux 2804 with OneNAND";
+
+ gpmc_pins: pinmux_gpmc_pins {
+ pinctrl-single,pins = <
+
+ /* address lines */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+
+ /* data lines, gpmc_d0..d7 not muxable according to TRM */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+
+ /*
+ * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+ * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+ */
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+};
+
+&gpmc {
+ /* switch inherited setup to OneNAND */
+
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
+
+ /delete-node/ nand@0,0;
+
+ onenand@0,0 {
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+
+ gpmc,sync-read;
+ gpmc,sync-write;
+ gpmc,burst-length = <16>;
+ gpmc,burst-read;
+ gpmc,burst-wrap;
+ gpmc,burst-write;
+ gpmc,device-width = <2>;
+ gpmc,mux-add-data = <2>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <87>;
+ gpmc,cs-wr-off-ns = <87>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <10>;
+ gpmc,adv-wr-off-ns = <10>;
+ gpmc,oe-on-ns = <15>;
+ gpmc,oe-off-ns = <87>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <87>;
+ gpmc,rd-cycle-ns = <112>;
+ gpmc,wr-cycle-ns = <112>;
+ gpmc,access-ns = <81>;
+ gpmc,page-burst-access-ns = <15>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <5>;
+ gpmc,wr-data-mux-bus-ns = <30>;
+ gpmc,wr-access-ns = <81>;
+ gpmc,sync-clk-ps = <15000>;
+
+ x-loader@0 {
+ label = "X-Loader";
+ reg = <0 0x80000>;
+ };
+
+ bootloaders@80000 {
+ label = "U-Boot";
+ reg = <0x80000 0x1c0000>;
+ };
+
+ bootloaders_env@240000 {
+ label = "U-Boot Env";
+ reg = <0x240000 0x40000>;
+ };
+
+ kernel@280000 {
+ label = "Kernel";
+ reg = <0x280000 0x600000>;
+ };
+
+ filesystem@880000 {
+ label = "File System";
+ reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */
+ };
+
+ };
+};
};
&i2c3 {
- ak8975@0f {
+ ak8975@f {
compatible = "asahi-kasei,ak8975";
reg = <0x0f>;
};
vbus-supply = <&smps10_out1_reg>;
};
+&dwc3 {
+ dr_mode = "otg";
+};
+
&mcspi1 {
};
&i2c {
status = "okay";
- rtc {
+ rtc@32 {
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Cubietech CubieBoard6
*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* LeMaker Guitar SoM
*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include "owl-s500.dtsi"
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Actions Semi S500 SoC
*
* Copyright (c) 2016-2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#pwm-cells = <1>;
clocks = <&clks CLK_PWM1>;
};
+
+ rtc@40900000 {
+ clocks = <&clks CLK_OSC32k768>;
+ };
};
timer@40a00000 {
clocks = <&clks CLK_PWM1>;
};
- pwri2c: i2c@40f000180 {
+ pwri2c: i2c@40f00180 {
compatible = "mrvl,pxa-i2c";
reg = <0x40f00180 0x24>;
interrupts = <6>;
status = "disabled";
};
+
+ rtc@40900000 {
+ clocks = <&clks CLK_OSC32k768>;
+ };
};
clocks {
#include "skeleton.dtsi"
#include "dt-bindings/clock/pxa-clock.h"
+#define PMGROUP(pin) #pin
+#define PMMUX(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ }
+#define PMMUX_LPM_LOW(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ low-power-disable; \
+ }
+#define PMMUX_LPM_HIGH(func, pin, af) \
+ mux- ## func { \
+ groups = PMGROUP(P ## pin); \
+ function = #af; \
+ low-power-enable; \
+ }
+
/ {
model = "Marvell PXA2xx family SoC";
compatible = "marvell,pxa2xx";
};
};
- ffuart: uart@40100000 {
+ ffuart: serial@40100000 {
compatible = "mrvl,pxa-uart";
reg = <0x40100000 0x30>;
interrupts = <22>;
status = "disabled";
};
- btuart: uart@40200000 {
+ btuart: serial@40200000 {
compatible = "mrvl,pxa-uart";
reg = <0x40200000 0x30>;
interrupts = <21>;
status = "disabled";
};
- stuart: uart@40700000 {
+ stuart: serial@40700000 {
compatible = "mrvl,pxa-uart";
reg = <0x40700000 0x30>;
interrupts = <20>;
status = "disabled";
};
- hwuart: uart@41100000 {
+ hwuart: serial@41100000 {
compatible = "mrvl,pxa-uart";
reg = <0x41100000 0x30>;
interrupts = <7>;
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out>;
};
};
clocks = <&rpmcc RPM_QDSS_CLK>;
clock-names = "apb_pclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@4 {
reg = <4>;
funnel_in4: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@5 {
reg = <5>;
funnel_in5: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel_out: endpoint {
remote-endpoint = <&replicator_in>;
};
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel_in0>;
+ };
};
};
};
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel_in1>;
+ };
};
};
};
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel_in4>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel_in4>;
+ };
};
};
};
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel_in5>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel_in5>;
+ };
};
};
};
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
reg = <0x0>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 716000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
- enable-method = "qcom,kpss-acc-v1";
+ enable-method = "qcom,kpss-acc-v2";
+ next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
- operating-points = <
- /* kHz uV (fixed) */
- 48000 1100000
- 200000 1100000
- 500000 1100000
- 666000 1100000
- >;
clock-latency = <256000>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-48000000 {
+ opp-hz = /bits/ 64 <48000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ clock-latency-ns = <256000>;
+ };
+ opp-716000000 {
+ opp-hz = /bits/ 64 <716000000>;
+ clock-latency-ns = <256000>;
+ };
};
pmu {
status = "disabled";
};
- acc0: clock-controller@b088000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
- };
+ acc0: clock-controller@b088000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
+ };
- acc1: clock-controller@b098000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
- };
+ acc1: clock-controller@b098000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
+ };
- acc2: clock-controller@b0a8000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
- };
+ acc2: clock-controller@b0a8000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
+ };
- acc3: clock-controller@b0b8000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
- };
+ acc3: clock-controller@b0b8000 {
+ compatible = "qcom,kpss-acc-v2";
+ reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
+ };
- saw0: regulator@b089000 {
- compatible = "qcom,saw2";
- reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+ saw0: regulator@b089000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
regulator;
- };
+ };
- saw1: regulator@b099000 {
- compatible = "qcom,saw2";
- reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw1: regulator@b099000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
- saw2: regulator@b0a9000 {
- compatible = "qcom,saw2";
- reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw2: regulator@b0a9000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
- saw3: regulator@b0b9000 {
- compatible = "qcom,saw2";
- reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
- regulator;
- };
+ saw3: regulator@b0b9000 {
+ compatible = "qcom,saw2";
+ reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>;
+ regulator;
+ };
blsp1_uart1: serial@78af000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
#size-cells = <2>;
ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
- 0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
+ 0x82000000 0 0x40300000 0x40300000 0 0x400000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "msi";
#include "qcom-ipq8064-v1.0.dtsi"
/ {
- model = "Qualcomm IPQ8064/AP148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
- aliases {
- serial0 = &gsbi4_serial;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
+ model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
+ compatible = "qcom,ipq8064-ap148";
soc {
pinmux@800000 {
bias-disable;
};
- spi_pins: spi_pins {
+ buttons_pins: buttons_pins {
mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
+ pins = "gpio54", "gpio65";
+ drive-strength = <2>;
+ bias-pull-up;
};
};
};
gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
+ i2c@16380000 {
status = "ok";
- };
-
- i2c4: i2c@16380000 {
- status = "ok";
-
clock-frequency = <200000>;
-
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi4: spi@1a280000 {
- status = "ok";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
- flash: m25p80@0 {
- compatible = "s25fl256s1";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partition@0 {
- label = "rootfs";
- reg = <0x0 0x1000000>;
- };
-
- partition@1 {
- label = "scratch";
- reg = <0x1000000 0x1000000>;
- };
- };
- };
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- ports-implemented = <0x1>;
- status = "ok";
- };
};
};
// SPDX-License-Identifier: GPL-2.0
#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Qualcomm Technologies, Inc. IPQ8064-v1.0";
+
+ aliases {
+ serial0 = &gsbi4_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ soc {
+ gsbi@16300000 {
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ status = "ok";
+
+ serial@16340000 {
+ status = "ok";
+ };
+ };
+
+ gsbi5: gsbi@1a200000 {
+ qcom,mode = <GSBI_PROT_SPI>;
+ status = "ok";
+
+ spi4: spi@1a280000 {
+ status = "ok";
+ spi-max-frequency = <50000000>;
+
+ pinctrl-0 = <&spi_pins>;
+ pinctrl-names = "default";
+
+ cs-gpios = <&qcom_pinmux 20 0>;
+
+ flash: m25p80@0 {
+ compatible = "s25fl256s1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "rootfs";
+ reg = <0x0 0x1000000>;
+ };
+
+ partition@1 {
+ label = "scratch";
+ reg = <0x1000000 0x1000000>;
+ };
+ };
+ };
+ };
+
+ sata-phy@1b400000 {
+ status = "ok";
+ };
+
+ sata@29000000 {
+ ports-implemented = <0x1>;
+ status = "ok";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&buttons_pins>;
+ pinctrl-names = "default";
+
+ button@1 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ button@2 {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ debounce-interval = <60>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&leds_pins>;
+ pinctrl-names = "default";
+
+ led@7 {
+ label = "led_usb1";
+ gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led@8 {
+ label = "led_usb3";
+ gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "usbdev";
+ default-state = "off";
+ };
+
+ led@9 {
+ label = "status_led_fail";
+ gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@26 {
+ label = "sata_led";
+ gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led@53 {
+ label = "status_led_pass";
+ gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+ };
+};
/dts-v1/;
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ pcie0_pins: pcie0_pinmux {
+ mux {
+ pins = "gpio3";
+ function = "pcie1_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ pcie1_pins: pcie1_pinmux {
+ mux {
+ pins = "gpio48";
+ function = "pcie2_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ pcie2_pins: pcie2_pinmux {
+ mux {
+ pins = "gpio63";
+ function = "pcie3_rst";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ spi_pins: spi_pins {
+ mux {
+ pins = "gpio18", "gpio19", "gpio21";
+ function = "gsbi5";
+ drive-strength = <10>;
+ bias-none;
+ };
+ };
+
+ leds_pins: leds_pins {
+ mux {
+ pins = "gpio7", "gpio8", "gpio9",
+ "gpio26", "gpio53";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ output-low;
+ };
+ };
+
+ buttons_pins: buttons_pins {
+ mux {
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
intc: interrupt-controller@2000000 {
#reset-cells = <1>;
};
+ pcie0: pci@1b500000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b500000 0x1000
+ 0x1b502000 0x80
+ 0x1b600000 0x100
+ 0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_A_CLK>,
+ <&gcc PCIE_H_CLK>,
+ <&gcc PCIE_PHY_CLK>,
+ <&gcc PCIE_AUX_CLK>,
+ <&gcc PCIE_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_ACLK_RESET>,
+ <&gcc PCIE_HCLK_RESET>,
+ <&gcc PCIE_POR_RESET>,
+ <&gcc PCIE_PCI_RESET>,
+ <&gcc PCIE_PHY_RESET>,
+ <&gcc PCIE_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie0_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
+ };
+
+ pcie1: pci@1b700000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b700000 0x1000
+ 0x1b702000 0x80
+ 0x1b800000 0x100
+ 0x31f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_1_A_CLK>,
+ <&gcc PCIE_1_H_CLK>,
+ <&gcc PCIE_1_PHY_CLK>,
+ <&gcc PCIE_1_AUX_CLK>,
+ <&gcc PCIE_1_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_1_ACLK_RESET>,
+ <&gcc PCIE_1_HCLK_RESET>,
+ <&gcc PCIE_1_POR_RESET>,
+ <&gcc PCIE_1_PCI_RESET>,
+ <&gcc PCIE_1_PHY_RESET>,
+ <&gcc PCIE_1_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie1_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
+ };
+
+ pcie2: pci@1b900000 {
+ compatible = "qcom,pcie-ipq8064";
+ reg = <0x1b900000 0x1000
+ 0x1b902000 0x80
+ 0x1ba00000 0x100
+ 0x35f00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <2>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
+ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
+
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc PCIE_2_A_CLK>,
+ <&gcc PCIE_2_H_CLK>,
+ <&gcc PCIE_2_PHY_CLK>,
+ <&gcc PCIE_2_AUX_CLK>,
+ <&gcc PCIE_2_ALT_REF_CLK>;
+ clock-names = "core", "iface", "phy", "aux", "ref";
+
+ assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ resets = <&gcc PCIE_2_ACLK_RESET>,
+ <&gcc PCIE_2_HCLK_RESET>,
+ <&gcc PCIE_2_POR_RESET>,
+ <&gcc PCIE_2_PCI_RESET>,
+ <&gcc PCIE_2_PHY_RESET>,
+ <&gcc PCIE_2_EXT_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
+
+ pinctrl-0 = <&pcie2_pins>;
+ pinctrl-names = "default";
+
+ status = "disabled";
+ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
+ };
+
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sdcc1bam:dma@12402000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12402000 0x8000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC1_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ sdcc3bam:dma@12182000 {
+ compatible = "qcom,bam-v1.3.0";
+ reg = <0x12182000 0x8000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc SDC3_H_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sdcc@12400000 {
+ status = "disabled";
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ reg = <0x12400000 0x2000>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ max-frequency = <96000000>;
+ non-removable;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ vmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+ dma-names = "tx", "rx";
+ };
+
+ sdcc@12180000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12180000 0x2000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <192000000>;
+ #mmc-ddr-1_8v;
+ sd-uhs-sdr104;
+ sd-uhs-ddr50;
+ vqmmc-supply = <&vsdcc_fixed>;
+ dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+ dma-names = "tx", "rx";
+ };
+ };
};
};
bias-pull-up;
};
};
+
+ i2c3_pins: i2c3 {
+ mux {
+ pins = "gpio10", "gpio11";
+ function = "blsp_i2c3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ i2c12_pins: i2c12 {
+ mux {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ mpu6515_pin: mpu6515 {
+ irq {
+ pins = "gpio73";
+ function = "gpio";
+ bias-disable;
+ input-enable;
+ };
+ };
};
sdhci@f9824900 {
linux,code = <KEY_VOLUMEDOWN>;
};
};
+
+ i2c@f9968000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c12_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ mpu6515@68 {
+ compatible = "invensense,mpu6515";
+ reg = <0x68>;
+ interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>;
+ vddio-supply = <&pm8941_lvs1>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mpu6515_pin>;
+
+ i2c-gate {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ak8963@f {
+ compatible = "asahi-kasei,ak8963";
+ reg = <0x0f>;
+ // Currently only works in polling mode.
+ // gpios = <&msmgpio 61 0>;
+ vid-supply = <&pm8941_lvs1>;
+ vdd-supply = <&pm8941_l17>;
+ };
+
+ bmp280@76 {
+ compatible = "bosch,bmp280";
+ reg = <0x76>;
+ vdda-supply = <&pm8941_lvs1>;
+ vddd-supply = <&pm8941_l17>;
+ };
+ };
+ };
+ };
+
+ i2c@f9925000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+ clock-frequency = <100000>;
+ qcom,src-freq = <50000000>;
+
+ avago_apds993@39 {
+ compatible = "avago,apds9930";
+ reg = <0x39>;
+ interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8941_l17>;
+ vddio-supply = <&pm8941_lvs1>;
+ led-max-microamp = <100000>;
+ amstaos,proximity-diodes = <0>;
+ };
+ };
};
&spmi_bus {
cpus {
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 0xf04>;
CPU0: cpu@0 {
compatible = "qcom,krait";
cpu-pmu {
compatible = "qcom,krait-pmu";
- interrupts = <1 7 0xf04>;
+ interrupts = <GIC_PPI 7 0xf04>;
};
clocks {
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
+ interrupts = <GIC_PPI 2 0xf08>,
+ <GIC_PPI 3 0xf08>,
+ <GIC_PPI 4 0xf08>,
+ <GIC_PPI 1 0xf08>;
clock-frequency = <19200000>;
};
adsp-pil {
compatible = "qcom,msm8974-adsp-pil";
- interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
qcom,smem = <443>, <429>;
interrupt-parent = <&intc>;
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 10>;
qcom,smem = <435>, <428>;
interrupt-parent = <&intc>;
- interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
qcom,smem = <451>, <431>;
interrupt-parent = <&intc>;
- interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
modem_smsm: modem@1 {
reg = <1>;
- interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
adsp_smsm: adsp@2 {
reg = <2>;
- interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
wcnss_smsm: wcnss@7 {
reg = <7>;
- interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
frame@f9021000 {
frame-number = <0>;
- interrupts = <0 8 0x4>,
- <0 7 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
- interrupts = <0 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
- interrupts = <0 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
- interrupts = <0 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
- interrupts = <0 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
- interrupts = <0 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
- interrupts = <0 107 0x0>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
- interrupts = <0 108 0x0>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 123 0>, <0 138 0>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
- <GIC_SPI 224 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
<&gcc GCC_SDCC3_AHB_CLK>,
compatible = "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
- interrupts = <0 125 0>, <0 221 0>;
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 208 0>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
};
i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
- interrupts = <0 96 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
+ blsp_i2c3: i2c@f9925000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9925000 0x1000>;
+ interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
blsp_i2c8: i2c@f9964000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9964000 0x1000>;
- interrupts = <0 102 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
- interrupts = <0 105 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
dma-names = "tx", "rx";
};
+ blsp_i2c12: i2c@f9968000 {
+ status = "disabled";
+ compatible = "qcom,i2c-qup-v2.1.1";
+ reg = <0xf9968000 0x1000>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
- interrupts = <0 190 0>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&merger_out>;
};
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
merger_in1: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
merger_out: endpoint {
remote-endpoint = <&etf_in>;
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@5 {
reg = <5>;
funnel1_in5: endpoint {
- slave-mode;
remote-endpoint = <&kpss_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
};
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
};
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&kpss_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&kpss_in0>;
+ };
};
};
};
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&kpss_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&kpss_in1>;
+ };
};
};
};
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&kpss_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&kpss_in2>;
+ };
};
};
};
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&kpss_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&kpss_in3>;
+ };
};
};
};
compatible = "qcom,smd";
adsp {
- interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
};
modem {
- interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 12>;
qcom,smd-edge = <0>;
};
rpm {
- interrupts = <0 168 1>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board";
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
};
+
+&pciec {
+ status = "okay";
+};
model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M";
compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743";
};
+
+&pciec {
+ status = "okay";
+};
phy3: ethernet-phy@3 {
reg = <3>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
};
};
clock-frequency = <20000000>;
};
+&pfc {
+ scif1_pins: scif1 {
+ groups = "scif1_data_b";
+ function = "scif1";
+ };
+};
+
&scif1 {
+ pinctrl-0 = <&scif1_pins>;
+ pinctrl-names = "default";
+
status = "okay";
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/r8a77470-cpg-mssr.h>
+#include <dt-bindings/power/r8a77470-sysc.h>
/ {
compatible = "renesas,r8a77470";
#address-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
reg = <0>;
clock-frequency = <1000000000>;
clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A77470_PD_CA7_CPU0>;
next-level-cache = <&L2_CA7>;
};
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <1>;
+ clock-frequency = <1000000000>;
+ clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>;
+ power-domains = <&sysc R8A77470_PD_CA7_CPU1>;
+ next-level-cache = <&L2_CA7>;
+ };
L2_CA7: cache-controller-0 {
compatible = "cache";
cache-unified;
cache-level = <2>;
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A77470_PD_CA7_SCU>;
};
};
#size-cells = <2>;
ranges;
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 23>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 30>;
+ gpio-reserved-ranges = <17 10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a77470",
+ "renesas,rcar-gen2-gpio";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 907>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a77470";
+ reg = <0 0xe6060000 0 0x118>;
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77470-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
#reset-cells = <1>;
};
+ apmu@e6151000 {
+ compatible = "renesas,r8a77470-apmu", "renesas,apmu";
+ reg = <0 0xe6151000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
+ };
+
rst: reset-controller@e6160000 {
compatible = "renesas,r8a77470-rst";
reg = <0 0xe6160000 0 0x100>;
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 407>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 407>;
};
reg = <0 0xe6300000 0 0x20000>;
};
+ i2c4: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77470",
+ "renesas,rcar-gen2-i2c";
+ reg = <0 0xe6520000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a77470",
"renesas,rcar-dmac";
"ch12", "ch13", "ch14";
clocks = <&cpg CPG_MOD 219>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <15>;
"ch12", "ch13", "ch14";
clocks = <&cpg CPG_MOD 218>;
clock-names = "fck";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <15>;
reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 812>;
#address-cells = <1>;
#size-cells = <0>;
dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
<&dmac1 0x29>, <&dmac1 0x2a>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 721>;
status = "disabled";
};
dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
<&dmac1 0x2d>, <&dmac1 0x2e>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 720>;
status = "disabled";
};
dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
<&dmac1 0x2b>, <&dmac1 0x2c>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 719>;
status = "disabled";
};
dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
<&dmac1 0x2f>, <&dmac1 0x30>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 718>;
status = "disabled";
};
dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
<&dmac1 0xfb>, <&dmac1 0xfc>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 715>;
status = "disabled";
};
dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
<&dmac1 0xfd>, <&dmac1 0xfe>;
dma-names = "tx", "rx", "tx", "rx";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 714>;
status = "disabled";
};
+ sdhi2: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a77470",
+ "renesas,rcar-gen2-sdhi";
+ reg = <0 0xee160000 0 0x328>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ max-frequency = <97500000>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
// SPDX-License-Identifier: GPL-2.0
/*
- * Reference Device Tree Source for the Bock-W board
+ * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for Renesas r8a7778
+ * Device Tree Source for the R-Car M1A (R8A77781) SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the Marzen board
+ * Device Tree Source for the R-Car H1 (R8A77790) Marzen board
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for Renesas r8a7779
+ * Device Tree Source for the R-Car H1 (R8A77790) SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Simon Horman
sata: sata@fc600000 {
compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
- reg = <0xfc600000 0x2000>;
+ reg = <0xfc600000 0x200000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ };
+
rtc {
compatible = "dlg,da9063-rtc";
};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7790 SoC
+ * Device Tree Source for the R-Car H2 (R8A77900) SoC
*
* Copyright (C) 2015 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7790",
"renesas,rcar-gen2-sata";
- reg = <0 0xee300000 0 0x2000>;
+ reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
sata1: sata@ee500000 {
compatible = "renesas,sata-r8a7790",
"renesas,rcar-gen2-sata";
- reg = <0 0xee500000 0 0x2000>;
+ reg = <0 0xee500000 0 0x200000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7791 SoC
+ * Device Tree Source for the R-Car M2-W (R8A77910) SoC
*
* Copyright (C) 2013-2015 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
sata0: sata@ee300000 {
compatible = "renesas,sata-r8a7791",
"renesas,rcar-gen2-sata";
- reg = <0 0xee300000 0 0x2000>;
+ reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
sata1: sata@ee500000 {
compatible = "renesas,sata-r8a7791",
"renesas,rcar-gen2-sata";
- reg = <0 0xee500000 0 0x2000>;
+ reg = <0 0xee500000 0 0x200000>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 814>;
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7792 SoC
+ * Device Tree Source for the R-Car V2H (R8A77920) SoC
*
* Copyright (C) 2016 Cogent Embedded Inc.
*/
du: display@feb00000 {
compatible = "renesas,du-r8a7792";
reg = <0 0xfeb00000 0 0x40000>;
- reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
status = "okay";
};
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
compatible = "dlg,da9063-watchdog";
};
};
+
+ vdd_dvfs: regulator@68 {
+ compatible = "dlg,da9210";
+ reg = <0x68>;
+ interrupt-parent = <&irqc0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
};
&i2c4 {
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7793 SoC
+ * Device Tree Source for the R-Car M2-N (R8A77930) SoC
*
* Copyright (C) 2014-2015 Renesas Electronics Corporation
*/
clock-frequency = <400000>;
};
+&i2c7 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ };
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+ };
+};
+
&mmcif0 {
pinctrl-0 = <&mmcif0_pins>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7794 SoC
+ * Device Tree Source for the R-Car E2 (R8A77940) SoC
*
* Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2014 Ulrich Hecht
du: display@feb00000 {
compatible = "renesas,du-r8a7794";
reg = <0 0xfeb00000 0 0x40000>;
- reg-names = "du";
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>;
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a06g032-sysctrl.h>
/ {
compatible = "renesas,r9a06g032";
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0>;
- clocks = <&sysctrl 84>;
+ clocks = <&sysctrl R9A06G032_CLK_A7MP>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <1>;
- clocks = <&sysctrl 84>;
+ clocks = <&sysctrl R9A06G032_CLK_A7MP>;
enable-method = "renesas,r9a06g032-smp";
cpu-release-addr = <0 0x4000c204>;
};
};
uart0: serial@40060000 {
- compatible = "snps,dw-apb-uart";
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
reg = <0x40060000 0x400>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
- clocks = <&sysctrl 146>;
- clock-names = "baudclk";
+ clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: serial@40061000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+ reg = <0x40061000 0x400>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: serial@40062000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart";
+ reg = <0x40062000 0x400>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: serial@50000000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50000000 0x400>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart4: serial@50001000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50001000 0x400>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart5: serial@50002000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50002000 0x400>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart6: serial@50003000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50003000 0x400>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>;
+ clock-names = "baudclk", "apb_pclk";
+ status = "disabled";
+ };
+
+ uart7: serial@50004000 {
+ compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart";
+ reg = <0x50004000 0x400>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>;
+ clock-names = "baudclk", "apb_pclk";
status = "disabled";
};
/* no rts / cts for uart2 */
};
- spi {
+ spi-pins {
spi_txd:spi-txd {
rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
};
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
};
};
+ sd0 {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop0_out>, <&vop1_out>;
+ };
+
sram: sram@10080000 {
compatible = "mmio-sram";
reg = <0x10080000 0x8000>;
};
};
+ vop0: vop@1010c000 {
+ compatible = "rockchip,rk3188-vop";
+ reg = <0x1010c000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop0_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vop1: vop@1010e000 {
+ compatible = "rockchip,rk3188-vop";
+ reg = <0x1010e000 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ status = "disabled";
+
+ vop1_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
timer3: timer@2000e000 {
compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer";
reg = <0x2000e000 0x20>;
};
};
+ lcdc1 {
+ lcdc1_dclk: lcdc1-dclk {
+ rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_den: lcdc1-den {
+ rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_hsync: lcdc1-hsync {
+ rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_vsync: lcdc1-vsync {
+ rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ lcdc1_rgb24: ldcd1-rgb24 {
+ rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>,
+ <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pwm0 {
pwm0_out: pwm0-out {
rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "rk3288-tinker.dtsi"
+
+/ {
+ model = "Rockchip RK3288 Asus Tinker Board S";
+ compatible = "asus,rk3288-tinker-s", "rockchip,rk3288";
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ disable-wp;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+ max-frequency = <150000000>;
+ mmc-hs200-1_8v;
+ mmc-ddr-1_8v;
+ status = "okay";
+};
/dts-v1/;
-#include "rk3288.dtsi"
-#include <dt-bindings/input/input.h>
+#include "rk3288-tinker.dtsi"
/ {
- model = "Rockchip RK3288 Tinker Board";
+ model = "Rockchip RK3288 Asus Tinker Board";
compatible = "asus,rk3288-tinker", "rockchip,rk3288";
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- memory {
- reg = <0x0 0x0 0x0 0x80000000>;
- device_type = "memory";
- };
-
- ext_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <125000000>;
- clock-output-names = "ext_gmac";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- autorepeat;
-
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- button@0 {
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- label = "GPIO Key Power";
- linux,input-type = <1>;
- wakeup-source;
- debounce-interval = <100>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- act-led {
- gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="mmc0";
- };
-
- heartbeat-led {
- gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger="heartbeat";
- };
-
- pwr-led {
- gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "default-on";
- };
- };
-
- sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "rockchip,tinker-codec";
- simple-audio-card,mclk-fs = <512>;
-
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
-
- simple-audio-card,cpu {
- sound-dai = <&i2s>;
- };
- };
-
- vcc_sys: vsys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_sd: sdmmc-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_pwr>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- vin-supply = <&vcc_io>;
- };
-};
-
-&cpu0 {
- cpu0-supply = <&vdd_cpu>;
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_MAC>;
- assigned-clock-parents = <&ext_gmac>;
- clock_in_out = "input";
- phy-mode = "rgmii";
- phy-supply = <&vcc33_lan>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio4 7 0>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 1000000>;
- tx_delay = <0x30>;
- rx_delay = <0x10>;
- status = "ok";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c5>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio0>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
- <&gpio0 12 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc_io>;
- vcc9-supply = <&vcc_io>;
- vcc10-supply = <&vcc_io>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc_io>;
- vddio-supply = <&vcc_io>;
-
- regulators {
- vdd_cpu: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_arm";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <6000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_io: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_io";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc18_ldo1: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_ldo1";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_mipi: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc33_mipi";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_10: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd_10";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc18_codec: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_codec";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vccio_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vdd10_lcd: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-name = "vdd10_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1000000>;
- };
- };
-
- vcc_18: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_18";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc18_lcd: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc18_lcd";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc33_sd: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_sd";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc33_lan: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc33_lan";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2s {
- #sound-dai-cells = <0>;
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- sdcard-supply = <&vccio_sd>;
-};
-
-&pinctrl {
- pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
- drive-strength = <8>;
- };
-
- pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- backlight {
- bl_en: bl-en {
- rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- eth_phy {
- eth_phy_pwr: eth-phy-pwr {
- rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int: pmic-int {
- rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
- &pcfg_pull_up>;
- };
-
- dvs_1: dvs-1 {
- rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
-
- dvs_2: dvs-2 {
- rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
- &pcfg_pull_down>;
- };
- };
-
- sdmmc {
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
- <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <6 20 RK_FUNC_1 \
- &pcfg_pull_none_drv_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
- };
-
- sdmmc_pwr: sdmmc-pwr {
- rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pwr_3g: pwr-3g {
- rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcc18_ldo1>;
- status ="okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <200>;
- disable-wp; /* wp not hooked up */
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
- vmmc-supply = <&vcc33_sd>;
- vqmmc-supply = <&vccio_sd>;
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&uart3 {
- status = "okay";
-};
-
-&uart4 {
- status = "okay";
-};
-
-&usbphy {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1 {
- status = "okay";
-};
-
-&usb_otg {
- status= "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-&wdt {
- status = "okay";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+#include "rk3288.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ memory {
+ reg = <0x0 0x0 0x0 0x80000000>;
+ device_type = "memory";
+ };
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ button@0 {
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ label = "GPIO Key Power";
+ linux,input-type = <1>;
+ wakeup-source;
+ debounce-interval = <100>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ act-led {
+ gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="mmc0";
+ };
+
+ heartbeat-led {
+ gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger="heartbeat";
+ };
+
+ pwr-led {
+ gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,name = "rockchip,tinker-codec";
+ simple-audio-card,mclk-fs = <512>;
+
+ simple-audio-card,codec {
+ sound-dai = <&hdmi>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s>;
+ };
+ };
+
+ vcc_sys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc_sd: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_pwr>;
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ clock_in_out = "input";
+ phy-mode = "rgmii";
+ phy-supply = <&vcc33_lan>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
+
+&gpu {
+ mali-supply = <&vdd_gpu>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+ <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc_io>;
+ vcc9-supply = <&vcc_io>;
+ vcc10-supply = <&vcc_io>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc_io>;
+ vddio-supply = <&vcc_io>;
+
+ regulators {
+ vdd_cpu: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-name = "vdd_arm";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ regulator-ramp-delay = <6000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_io: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc18_ldo1: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_ldo1";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_mipi: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc33_mipi";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_10: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc18_codec: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vccio_sd: LDO_REG5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vdd10_lcd: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
+ };
+
+ vcc_18: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc18_lcd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc33_sd: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc33_lan: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc33_lan";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2s {
+ #sound-dai-cells = <0>;
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ sdcard-supply = <&vccio_sd>;
+};
+
+&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ backlight {
+ bl_en: bl-en {
+ rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ eth_phy {
+ eth_phy_pwr: eth-phy-pwr {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic-int {
+ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \
+ &pcfg_pull_up>;
+ };
+
+ dvs_1: dvs-1 {
+ rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+
+ dvs_2: dvs-2 {
+ rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \
+ &pcfg_pull_down>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 \
+ &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pwr_3g: pwr-3g {
+ rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc18_ldo1>;
+ status ="okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp; /* wp not hooked up */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+ vmmc-supply = <&vcc33_sd>;
+ vqmmc-supply = <&vccio_sd>;
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1 {
+ status = "okay";
+};
+
+&usb_otg {
+ status= "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
interrupts = <30>;
wakeup-interrupt-controller {
- compatible = "samsung,exynos4210-wakeup-eint";
+ compatible = "samsung,s5pv210-wakeup-eint";
interrupts = <16>;
interrupt-parent = <&vic0>;
};
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/iio/adc/at91-sama5d2_adc.h>
/ {
model = "Atmel SAMA5D2 family SoC";
serial1 = &uart3;
tcb0 = &tcb0;
tcb1 = &tcb1;
+ i2s0 = &i2s0;
+ i2s1 = &i2s1;
};
cpus {
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etb_in: endpoint {
- slave-mode;
- remote-endpoint = <&etm_out>;
+ in-ports {
+ port {
+ etb_in: endpoint {
+ remote-endpoint = <&etm_out>;
+ };
};
};
};
clocks = <&mck>;
clock-names = "apb_pclk";
- port {
- etm_out: endpoint {
- remote-endpoint = <&etb_in>;
+ out-ports {
+ port {
+ etm_out: endpoint {
+ remote-endpoint = <&etb_in>;
+ };
};
};
};
};
};
- nand0: nand@80000000 {
- compatible = "atmel,sama5d2-nand";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- reg = < /* EBI CS3 */
- 0x80000000 0x08000000
- /* SMC PMECC regs */
- 0xf8014070 0x00000490
- /* SMC PMECC Error Location regs */
- 0xf8014500 0x00000200
- /* ROM Galois tables */
- 0x00040000 0x00018000
- >;
- interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
- atmel,nand-addr-offset = <21>;
- atmel,nand-cmd-offset = <22>;
- atmel,nand-has-dma;
- atmel,has-pmecc;
- atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
- status = "disabled";
-
- nfc@c0000000 {
- compatible = "atmel,sama5d3-nfc";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = < /* NFC Command Registers */
- 0xc0000000 0x08000000
- /* NFC HSMC regs */
- 0xf8014000 0x00000070
- /* NFC SRAM banks */
- 0x00100000 0x00100000
- >;
- clocks = <&hsmc_clk>;
- atmel,write-by-sram;
- };
- };
-
sdmmc0: sdio-host@a0000000 {
compatible = "atmel,sama5d2-sdhci";
reg = <0xa0000000 0x300>;
atmel,clk-output-range = <0 100000000>;
};
};
+
+ i2s_clkmux {
+ compatible = "atmel,sama5d2-clk-i2s-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2s0muxck: i2s0_muxclk {
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ #clock-cells = <0>;
+ reg = <0>;
+ };
+
+ i2s1muxck: i2s1_muxclk {
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ #clock-cells = <0>;
+ reg = <1>;
+ };
+ };
};
qspi0: spi@f0020000 {
clocks = <&clk32k>;
};
+ i2s0: i2s@f8050000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xf8050000 0x100>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s0_clk>, <&i2s0_gclk>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&i2s0muxck>;
+ assigned-clock-parents = <&i2s0_gclk>;
+ status = "disabled";
+ };
+
can0: can@f8054000 {
compatible = "bosch,m_can";
reg = <0xf8054000 0x4000>, <0x210000 0x4000>;
atmel,max-sample-rate-hz = <20000000>;
atmel,startup-time-ms = <4>;
atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>;
+ #io-channel-cells = <1>;
+ status = "disabled";
+ };
+
+ resistive_touch: resistive-touch {
+ compatible = "resistive-adc-touch";
+ io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>,
+ <&adc AT91_SAMA5D2_ADC_P_CHANNEL>;
+ io-channel-names = "x", "y", "pressure";
+ touchscreen-min-pressure = <50000>;
status = "disabled";
};
status = "disabled";
};
+ i2s1: i2s@fc04c000 {
+ compatible = "atmel,sama5d2-i2s";
+ reg = <0xfc04c000 0x100>;
+ interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(33))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(34))>;
+ dma-names = "tx", "rx";
+ clocks = <&i2s1_clk>, <&i2s1_gclk>;
+ clock-names = "pclk", "gclk";
+ assigned-clocks = <&i2s1muxck>;
+ assigned-parrents = <&i2s1_gclk>;
+ status = "disabled";
+ };
+
can1: can@fc050000 {
compatible = "bosch,m_can";
reg = <0xfc050000 0x4000>, <0x210000 0x4000>;
};
};
- rstc@fc068600 {
+ reset_controller: rstc@fc068600 {
compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc";
reg = <0xfc068600 0x10>;
clocks = <&clk32k>;
};
- shdwc@fc068610 {
+ shutdown_controller: shdwc@fc068610 {
compatible = "atmel,at91sam9x5-shdwc";
reg = <0xfc068610 0x10>;
clocks = <&clk32k>;
clocks = <&h32ck>;
};
- watchdog@fc068640 {
+ watchdog: watchdog@fc068640 {
compatible = "atmel,sama5d4-wdt";
reg = <0xfc068640 0x10>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>;
};
- pinctrl@fc06a000 {
+ pinctrl: pinctrl@fc06a000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
#size-cells = <1>;
aliases {
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
serial0 = &uart0;
serial1 = &uart1;
timer0 = &timer0;
clk-gate = <0xa0 9>;
};
+ nand_ecc_clk: nand_ecc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xa0 9>;
+ };
+
nand_clk: nand_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-gate-clk";
- clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
+ clocks = <&nand_x_clk>;
clk-gate = <0xa0 10>;
fixed-divider = <4>;
};
reg-names = "nand_data", "denali_reg";
interrupts = <0x0 0x90 0x4>;
dma-mask = <0xffffffff>;
- clocks = <&nand_x_clk>;
+ clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+ clock-names = "nand", "nand_x", "ecc";
status = "disabled";
};
reg = <0xffc08000 0x1000>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER0_RESET>;
+ reset-names = "timer";
};
timer1: timer1@ffc09000 {
reg = <0xffc09000 0x1000>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER1_RESET>;
+ reset-names = "timer";
};
timer2: timer2@ffd00000 {
reg = <0xffd00000 0x1000>;
clocks = <&osc1>;
clock-names = "timer";
+ resets = <&rst OSC1TIMER0_RESET>;
+ reset-names = "timer";
};
timer3: timer3@ffd01000 {
reg = <0xffd01000 0x1000>;
clocks = <&osc1>;
clock-names = "timer";
+ resets = <&rst OSC1TIMER1_RESET>;
+ reset-names = "timer";
};
uart0: serial0@ffc02000 {
clk-gate = <0xC8 11>;
};
- nand_clk: nand_clk {
+ nand_x_clk: nand_x_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
clocks = <&l4_mp_clk>;
clk-gate = <0xC8 10>;
};
+ nand_ecc_clk: nand_ecc_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&nand_x_clk>;
+ clk-gate = <0xC8 10>;
+ };
+
+ nand_clk: nand_clk {
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-a10-gate-clk";
+ clocks = <&nand_x_clk>;
+ fixed-divider = <4>;
+ clk-gate = <0xC8 10>;
+ };
+
spi_m_clk: spi_m_clk {
#clock-cells = <0>;
compatible = "altr,socfpga-a10-gate-clk";
status = "disabled";
};
- sdr: sdr@ffc25000 {
+ sdr: sdr@ffcfb100 {
compatible = "altr,sdr-ctl", "syscon";
reg = <0xffcfb100 0x80>;
};
reg-names = "nand_data", "denali_reg";
interrupts = <0 99 4>;
dma-mask = <0xffffffff>;
- clocks = <&nand_clk>;
+ clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
+ clock-names = "nand", "nand_x", "ecc";
status = "disabled";
};
timer@ffffc600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xffffc600 0x100>;
- interrupts = <1 13 0xf04>;
+ interrupts = <1 13 0xf01>;
clocks = <&mpu_periph_clk>;
};
reg = <0xffc02700 0x100>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER0_RESET>;
+ reset-names = "timer";
};
timer1: timer1@ffc02800 {
reg = <0xffc02800 0x100>;
clocks = <&l4_sp_clk>;
clock-names = "timer";
+ resets = <&rst SPTIMER1_RESET>;
+ reset-names = "timer";
};
timer2: timer2@ffd00000 {
reg = <0xffd00000 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
+ resets = <&rst L4SYSTIMER0_RESET>;
+ reset-names = "timer";
};
timer3: timer3@ffd00100 {
reg = <0xffd01000 0x100>;
clocks = <&l4_sys_free_clk>;
clock-names = "timer";
+ resets = <&rst L4SYSTIMER1_RESET>;
+ reset-names = "timer";
};
uart0: serial0@ffc02000 {
status = "okay";
clock-frequency = <100000>;
- adxl345: adxl345@0 {
+ adxl345: adxl345@53 {
compatible = "adi,adxl345";
reg = <0x53>;
model = "EBV SOCrates";
compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga";
+ aliases {
+ ethernet0 = &gmac1;
+ };
+
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory@0 {
compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga";
chosen {
- bootargs = "console=ttyS0,115200";
+ bootargs = "earlyprintk";
+ stdout-path = "serial0:115200n8";
};
memory@0 {
#include <dt-bindings/arm/ux500_pm_domains.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/ste-ab8500.h>
-#include "skeleton.dtsi"
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ chosen {
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
- port {
- ptm0_out_port: endpoint {
- remote-endpoint = <&funnel_in_port0>;
+ out-ports {
+ port {
+ ptm0_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port0>;
+ };
};
};
};
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
- port {
- ptm1_out_port: endpoint {
- remote-endpoint = <&funnel_in_port1>;
+ out-ports {
+ port {
+ ptm1_out_port: endpoint {
+ remote-endpoint = <&funnel_in_port1>;
+ };
};
};
};
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel output ports */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
funnel_out_port: endpoint {
remote-endpoint =
<&replicator_in_port0>;
};
};
+ };
- /* funnel input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&ptm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&ptm1_out_port>;
};
};
clocks = <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
- /* replicator output ports */
port@0 {
reg = <0>;
replicator_out_port0: endpoint {
remote-endpoint = <&etb_in_port>;
};
};
+ };
- /* replicator input port */
- port@2 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&funnel_out_port>;
};
};
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etb_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ in-ports {
+ port {
+ etb_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
<0xa0410100 0x100>;
};
- scu@a04100000 {
+ scu@a0410000 {
compatible = "arm,cortex-a9-scu";
reg = <0xa0410000 0x100>;
};
};
prcmu: prcmu@80157000 {
- compatible = "stericsson,db8500-prcmu";
+ compatible = "stericsson,db8500-prcmu", "syscon";
reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80002000 {
+ spi@80002000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80002000 0x1000>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pm_domains DOMAIN_VAPE>;
};
- ssp@80003000 {
+ spi@80003000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x80003000 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
mcde {
lcd_default_mode: lcd_default {
- default_mux {
+ default_mux1 {
/* Mux in VSI0 and all the data lines */
function = "lcd";
groups =
"lcdvsi0_a_1", /* VSI0 for LCD */
"lcd_d0_d7_a_1", /* Data lines */
"lcd_d8_d11_a_1", /* TV-out */
- "lcdaclk_b_1", /* Clock line for TV-out */
"lcdvsi1_a_1"; /* VSI1 for HDMI */
};
+ default_mux2 {
+ function = "lcda";
+ groups =
+ "lcdaclk_b_1"; /* Clock line for TV-out */
+ };
default_cfg1 {
pins =
"GPIO68_E1", /* VSI0 */
/ {
memory {
+ device_type = "memory";
reg = <0x00000000 0x20000000>;
};
};
};
- ssp@80002000 {
+ spi@80002000 {
/*
* On the first generation boards, this SSP/SPI port was connected
* to the AB8500.
};
memory {
+ device_type = "memory";
reg = <0x00000000 0x20000000>;
};
pinctrl-1 = <&i2c3_sleep_mode>;
};
- ssp@80002000 {
+ spi@80002000 {
pinctrl-names = "default";
pinctrl-0 = <&ssp0_snowball_mode>;
};
dma-names = "rx";
};
- spi: ssp@c0006000 {
+ spi: spi@c0006000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0xc0006000 0x1000>;
interrupt-parent = <&vica>;
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2260";
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
- simple-audio-card,dai-link0 {
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
/* DAC */
format = "i2s";
mclk-fs = <128>;
compatible = "simple-audio-card";
simple-audio-card,name = "STI-B2120";
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
- simple-audio-card,dai-link0 {
+ simple-audio-card,dai-link@0 {
+ reg = <0>;
/* HDMI */
format = "i2s";
mclk-fs = <128>;
};
};
- simple-audio-card,dai-link1 {
+ simple-audio-card,dai-link@1 {
+ reg = <1>;
/* DAC */
format = "i2s";
mclk-fs = <256>;
};
};
- simple-audio-card,dai-link2 {
+ simple-audio-card,dai-link@2 {
+ reg = <2>;
/* SPDIF */
format = "left_j";
mclk-fs = <128>;
&sdio {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_pins_od>;
clock-frequency = <0>;
};
- clk-lse {
+ clk_lse: clk-lse {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
&sdio {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins>;
&sdio1 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins_a>;
pinctrl-1 = <&sdio_pins_od_a>;
&sdio2 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
- cd-gpios = <&gpioi 15 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>;
broken-cd;
pinctrl-names = "default", "opendrain";
pinctrl-0 = <&sdio_pins_b>;
interrupt-parent = <&exti>;
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "alarm";
- st,syscfg = <&pwrcfg>;
+ st,syscfg = <&pwrcfg 0x00 0x100>;
status = "disabled";
};
/dts-v1/;
#include "stm32mp157c-ed1.dts"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
serial0 = &uart4;
ethernet0 = ðernet0;
};
+
+ panel_backlight: panel-backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+ default-on;
+ status = "okay";
+ };
+};
+
+&cec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cec_pins_a>;
+ status = "okay";
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <<dc_ep0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel-dsi@0 {
+ compatible = "raydium,rm68200";
+ reg = <0>;
+ reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+ backlight = <&panel_backlight>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
};
ðernet0 {
};
};
-&cec {
- pinctrl-names = "default";
- pinctrl-0 = <&cec_pins_a>;
- status = "okay";
-};
-
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&i2c2_pins_a>;
status = "okay";
};
+<dc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
&m_can1 {
pinctrl-names = "default";
pinctrl-0 = <&m_can1_pins_a>;
dma-requests = <48>;
};
- qspi: qspi@58003000 {
+ qspi: spi@58003000 {
compatible = "st,stm32f469-qspi";
reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
reg-names = "qspi", "qspi_mm";
*/
clock-frequency = <400000>;
- touchscreen: touchscreen {
+ touchscreen: touchscreen@40 {
+ reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
pinctrl-names = "default";
};
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
soc@1c00000 {
compatible = "simple-bus";
#address-cells = <1>;
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun5i-a13-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_VE>;
+ interrupts = <53>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun5i-a13-mmc";
reg = <0x01c0f000 0x1000>;
reg = <0x40000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
};
};
+ video-codec@1c0e000 {
+ compatible = "allwinner,sun7i-a20-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_VE>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun7i-a20-mmc";
reg = <0x01c0f000 0x1000>;
reg = <0x40000000 0x80000000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address must be kept in the lower 256 MiBs of DRAM for VE. */
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
sound: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "sun8i-a33-audio";
};
};
+ video-codec@01c0e000 {
+ compatible = "allwinner,sun8i-a33-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
crypto: crypto-engine@1c15000 {
compatible = "allwinner,sun4i-a10-crypto";
reg = <0x01c15000 0x1000>;
status = "okay";
};
+&r_cir {
+ clock-frequency = <3000000>;
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
reg = <0x1f01c00 0x400>;
};
+ r_cir: ir@1f02000 {
+ compatible = "allwinner,sun8i-a83t-ir",
+ "allwinner,sun5i-a13-ir";
+ clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>;
+ clock-names = "apb", "ir";
+ resets = <&r_ccu RST_APB0_IR>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x400>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&r_cir_pin>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@1f02c00 {
compatible = "allwinner,sun8i-a83t-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupt-controller;
#interrupt-cells = <3>;
+ r_cir_pin: r-cir-pin {
+ pins = "PL12";
+ function = "s_cir_rx";
+ };
+
r_rsb_pins: r-rsb-pins {
pins = "PL0", "PL1";
function = "s_rsb";
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+/dts-v1/;
+#include "sun8i-h3.dtsi"
+#include "sunxi-bananapi-m2-plus-v1.2.dtsi"
+
+/ {
+ model = "Banana Pi BPI-M2-Plus v1.2 H3";
+ compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3";
+};
/dts-v1/;
#include "sun8i-h3.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
+#include "sunxi-bananapi-m2-plus.dtsi"
/ {
- model = "Banana Pi BPI-M2-Plus";
+ model = "Banana Pi BPI-M2-Plus H3";
compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3";
-
- aliases {
- ethernet0 = &emac;
- serial0 = &uart0;
- serial1 = &uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&hdmi_out_con>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
-
- pwr_led {
- label = "bananapi-m2-plus:red:pwr";
- gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
- default-state = "on";
- };
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
-
- sw4 {
- label = "power";
- linux,code = <BTN_0>;
- gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- };
- };
-
- reg_gmac_3v3: gmac-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "gmac-3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- startup-delay-us = <100000>;
- enable-active-high;
- gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
- };
-
- wifi_pwrseq: wifi_pwrseq {
- compatible = "mmc-pwrseq-simple";
- pinctrl-names = "default";
- reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- };
-};
-
-&de {
- status = "okay";
-};
-
-&ehci0 {
- status = "okay";
-};
-
-&ehci1 {
- status = "okay";
-};
-
-&ehci2 {
- status = "okay";
-};
-
-&emac {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_rgmii_pins>;
- phy-supply = <®_gmac_3v3>;
- phy-handle = <&ext_rgmii_phy>;
- phy-mode = "rgmii";
-
- status = "okay";
-};
-
-&external_mdio {
- ext_rgmii_phy: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-};
-
-&hdmi {
- status = "okay";
-};
-
-&hdmi_out {
- hdmi_out_con: endpoint {
- remote-endpoint = <&hdmi_con_in>;
- };
-};
-
-&ir {
- pinctrl-names = "default";
- pinctrl-0 = <&ir_pins_a>;
- status = "okay";
-};
-
-&mmc0 {
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
- status = "okay";
-};
-
-&mmc1 {
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc3v3>;
- mmc-pwrseq = <&wifi_pwrseq>;
- bus-width = <4>;
- non-removable;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&pio>;
- interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
- interrupt-names = "host-wake";
- };
-};
-
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_pins>;
- vmmc-supply = <®_vcc3v3>;
- vqmmc-supply = <®_vcc3v3>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&ohci0 {
- status = "okay";
-};
-
-&ohci1 {
- status = "okay";
-};
-
-&ohci2 {
- status = "okay";
-};
-
-®_usb0_vbus {
- gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
- status = "okay";
-};
-
-&usb_otg {
- dr_mode = "otg";
- status = "okay";
-};
-
-&usbphy {
- usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
- usb0_vbus-supply = <®_usb0_vbus>;
- /* USB host VBUS is on as long as VCC-IO is on */
- status = "okay";
};
--- /dev/null
+/*
+ * Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun8i-h3.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi Zero Plus2 H3";
+ compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ reg_vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
+ post-power-on-delay-ms = <200>;
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cma_pool: cma@4a000000 {
+ compatible = "shared-dma-pool";
+ size = <0x6000000>;
+ alloc-ranges = <0x4a000000 0x6000000>;
+ reusable;
+ linux,cma-default;
+ };
+ };
+
soc {
system-control@1c00000 {
compatible = "allwinner,sun8i-h3-system-control";
};
};
+ video-codec@01c0e000 {
+ compatible = "allwinner,sun8i-h3-video-engine";
+ reg = <0x01c0e000 0x1000>;
+ clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+ <&ccu CLK_DRAM_VE>;
+ clock-names = "ahb", "mod", "ram";
+ resets = <&ccu RST_BUS_VE>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ allwinner,sram = <&ve_sram 1>;
+ };
+
mali: gpu@1c40000 {
compatible = "allwinner,sun8i-h3-mali", "arm,mali-400";
reg = <0x01c40000 0x10000>;
};
};
+&ahci {
+ ahci-supply = <®_dldo4>;
+ phy-supply = <®_eldo3>;
+ status = "okay";
+};
+
&de {
status = "okay";
};
&mmc0 {
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
- cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
- cd-inverted;
+ cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
status = "okay";
};
regulator-name = "vcc-wifi";
};
+®_dldo4 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-name = "vdd2v5-sata";
+};
+
+®_eldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd1v2-sata";
+};
+
&tcon_tv0 {
status = "okay";
};
#size-cells = <0>;
};
+ ahci: sata@1c18000 {
+ compatible = "allwinner,sun8i-r40-ahci";
+ reg = <0x01c18000 0x1000>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>;
+ resets = <&ccu RST_BUS_SATA>;
+ resets-name = "ahci";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ };
+
gmac: ethernet@1c50000 {
compatible = "allwinner,sun8i-r40-gmac";
syscon = <&ccu>;
*/
clock-frequency = <400000>;
- touchscreen: touchscreen@0 {
+ touchscreen: touchscreen@40 {
+ reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
pinctrl-names = "default";
&i2c0 {
status = "okay";
- axp22x: pmic@68 {
+ axp22x: pmic@34 {
compatible = "x-powers,axp221";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
};
};
- r_rsb: i2c@8003400 {
+ r_rsb: rsb@8003400 {
compatible = "allwinner,sun8i-a23-rsb";
reg = <0x08003400 0x400>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+ */
+
+#include "sunxi-bananapi-m2-plus.dtsi"
+
+/ {
+ /*
+ * Bananapi M2+ v1.2 uses a GPIO line to change the effective
+ * resistance on the CPU regulator's feedback pin.
+ */
+ reg_vdd_cpux: vdd-cpux {
+ compatible = "regulator-gpio";
+ regulator-name = "vdd-cpux";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-ramp-delay = <50>; /* 4ms */
+ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
+ gpios-states = <0x1>;
+ states = <1100000 0x0
+ 1300000 0x1>;
+ };
+};
+
+&cpu0 {
+ cpu-supply = <®_vdd_cpux>;
+};
--- /dev/null
+/*
+ * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ ethernet0 = &emac;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+
+ pwr_led {
+ label = "bananapi-m2-plus:red:pwr";
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+ default-state = "on";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+
+ sw4 {
+ label = "power";
+ linux,code = <BTN_0>;
+ gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ehci2 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_rgmii_pins>;
+ phy-supply = <®_gmac_3v3>;
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
+ status = "okay";
+};
+
+&external_mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
+&hdmi {
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&ir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir_pins_a>;
+ status = "okay";
+};
+
+&mmc0 {
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ status = "okay";
+};
+
+&mmc1 {
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&pio>;
+ interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+ interrupt-names = "host-wake";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc3v3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&ohci2 {
+ status = "okay";
+};
+
+®_usb0_vbus {
+ gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ /* USB host VBUS is on as long as VCC-IO is on */
+ status = "okay";
+};
clock-names = "apb", "ir";
resets = <&r_ccu RST_APB0_IR>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x01f02000 0x40>;
+ reg = <0x01f02000 0x400>;
status = "disabled";
};
host1x@50000000 {
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
/*
* GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID)
*/
- hdmi_ddc: i2c@7000c400 {
+ i2c@7000c400 {
status = "okay";
};
spi@7000d400 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev0: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* SPI4: Apalis SPI2 */
spi@7000da00 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev1: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* Apalis Serial ATA */
sata@70020000 {
status = "okay";
+ target-5v-supply = <®_5v0>;
+ target-12v-supply = <®_12v0>;
};
hda@70030000 {
/* Apalis MMC1 */
sdhci@700b0000 {
status = "okay";
+ bus-width = <4>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc1>;
};
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
+ bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>; /* BKL1_PWM */
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 3 5000000>; /* BKL1_PWM */
};
gpio-keys {
};
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
regulator-max-microvolt = <5000000>;
};
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "12V_SW";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
/* USBO1_EN */
reg_usbo1_vbus: regulator-usbo1-vbus {
compatible = "regulator-fixed";
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex_perst_n {
+ pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
/ {
model = "Toradex Apalis TK1 on Apalis Evaluation Board";
compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval",
- "toradex,apalis-tk1", "nvidia,tegra124";
+ "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
+ "nvidia,tegra124";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
host1x@50000000 {
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
* I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207
* (e.g. display EDID)
*/
- hdmi_ddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
spi@7000d400 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev0: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* SPI4: Apalis SPI2 */
spi@7000da00 {
status = "okay";
spi-max-frequency = <50000000>;
-
- spidev1: spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
};
/* Apalis Serial ATA */
sata@70020000 {
status = "okay";
+ target-5v-supply = <®_5v0>;
+ target-12v-supply = <®_12v0>;
};
hda@70030000 {
/* Apalis MMC1 */
sdhci@700b0000 {
status = "okay";
+ bus-width = <4>;
/* MMC1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc1>;
};
/* Apalis SD1 */
sdhci@700b0400 {
status = "okay";
+ bus-width = <4>;
/* SD1_CD# */
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
- bus-width = <4>;
vqmmc-supply = <&vddio_sdmmc3>;
};
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 3 5000000>; /* BKL1_PWM */
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 3 5000000>; /* BKL1_PWM */
};
gpio-keys {
};
};
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "5V_SW";
regulator-max-microvolt = <5000000>;
};
+ reg_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "12V_SW";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
/* USBO1_EN */
reg_usbo1_vbus: regulator-usbo1-vbus {
compatible = "regulator-fixed";
&gpio {
/* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
- pex_perst_n {
+ pex-perst-n {
gpio-hog;
gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
output-high;
* Compatible for Revisions 2GB: V1.2A
*/
/ {
- model = "Toradex Apalis TK1";
- compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
- "nvidia,tegra124";
-
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x80000000>;
};
pcie@1003000 {
status = "okay";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pex-pll-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-pex-pll-e-supply = <®_3v3>;
- hvdd-pex-supply = <®_3v3>;
- vddio-pex-ctl-supply = <®_3v3>;
+ avddio-pex-supply = <®_1v05_vdd>;
+ avdd-pex-pll-supply = <®_1v05_vdd>;
+ avdd-pll-erefe-supply = <®_1v05_avdd>;
+ dvddio-pex-supply = <®_1v05_vdd>;
+ hvdd-pex-pll-e-supply = <®_module_3v3>;
+ hvdd-pex-supply = <®_module_3v3>;
+ vddio-pex-ctl-supply = <®_module_3v3>;
/* Apalis PCIe (additional lane Apalis type specific) */
pci@1,0 {
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
phy-names = "pcie-0";
status = "okay";
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- pll-supply = <®_1v05_avdd_hdmi_pll>;
- vdd-supply = <®_3v3_avdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <®_1v05_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
* Node left disabled on purpose - the bootloader will enable
* it after having set the VPR up
*/
- vdd-supply = <&vdd_gpu>;
+ vdd-supply = <®_vdd_gpu>;
};
- pinmux: pinmux@70000868 {
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
/* Analogue Audio (On-module) */
- dap3_fs_pp0 {
+ dap3-fs-pp0 {
nvidia,pins = "dap3_fs_pp0";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_din_pp1 {
+ dap3-din-pp1 {
nvidia,pins = "dap3_din_pp1";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap3_dout_pp2 {
+ dap3-dout-pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_sclk_pp3 {
+ dap3-sclk-pp3 {
nvidia,pins = "dap3_sclk_pp3";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_pw4 {
+ dap-mclk1-pw4 {
nvidia,pins = "dap_mclk1_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis CAM1_MCLK */
- cam_mclk_pcc0 {
+ cam-mclk-pcc0 {
nvidia,pins = "cam_mclk_pcc0";
nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis Digital Audio */
- dap2_fs_pa2 {
+ dap2-fs-pa2 {
nvidia,pins = "dap2_fs_pa2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_sclk_pa3 {
+ dap2-sclk-pa3 {
nvidia,pins = "dap2_sclk_pa3";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_din_pa4 {
+ dap2-din-pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_dout_pa5 {
+ dap2-dout-pa5 {
nvidia,pins = "dap2_dout_pa5";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_out_pee0 {
+ clk3-out-pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis GPIO */
- usb_vbus_en0_pn4 {
+ usb-vbus-en0-pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
- usb_vbus_en1_pn5 {
+ usb-vbus-en1-pn5 {
nvidia,pins = "usb_vbus_en1_pn5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
- pex_l0_rst_n_pdd1 {
+ pex-l0-rst-n-pdd1 {
nvidia,pins = "pex_l0_rst_n_pdd1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_clkreq_n_pdd2 {
+ pex-l0-clkreq-n-pdd2 {
nvidia,pins = "pex_l0_clkreq_n_pdd2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_rst_n_pdd5 {
+ pex-l1-rst-n-pdd5 {
nvidia,pins = "pex_l1_rst_n_pdd5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_clkreq_n_pdd6 {
+ pex-l1-clkreq-n-pdd6 {
nvidia,pins = "pex_l1_clkreq_n_pdd6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dp_hpd_pff0 {
+ dp-hpd-pff0 {
nvidia,pins = "dp_hpd_pff0";
nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis HDMI1_CEC */
- hdmi_cec_pee3 {
+ hdmi-cec-pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis HDMI1_HPD */
- hdmi_int_pn7 {
+ hdmi-int-pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* Apalis I2C1 */
- gen1_i2c_scl_pc4 {
+ gen1-i2c-scl-pc4 {
nvidia,pins = "gen1_i2c_scl_pc4";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen1_i2c_sda_pc5 {
+ gen1-i2c-sda-pc5 {
nvidia,pins = "gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis I2C3 (CAM) */
- cam_i2c_scl_pbb1 {
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- cam_i2c_sda_pbb2 {
+ cam-i2c-sda-pbb2 {
nvidia,pins = "cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis I2C4 (DDC) */
- ddc_scl_pv4 {
+ ddc-scl-pv4 {
nvidia,pins = "ddc_scl_pv4";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,rcv-sel = <TEGRA_PIN_ENABLE>;
};
- ddc_sda_pv5 {
+ ddc-sda-pv5 {
nvidia,pins = "ddc_sda_pv5";
nvidia,function = "i2c4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis MMC1 */
- sdmmc1_cd_n_pv3 { /* CD# GPIO */
+ sdmmc1-cd-n-pv3 { /* CD# GPIO */
nvidia,pins = "sdmmc1_wp_n_pv3";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_out_pw5 { /* D5 GPIO */
+ clk2-out-pw5 { /* D5 GPIO */
nvidia,pins = "clk2_out_pw5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat3_py4 {
+ sdmmc1-dat3-py4 {
nvidia,pins = "sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat2_py5 {
+ sdmmc1-dat2-py5 {
nvidia,pins = "sdmmc1_dat2_py5";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat1_py6 {
+ sdmmc1-dat1-py6 {
nvidia,pins = "sdmmc1_dat1_py6";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat0_py7 {
+ sdmmc1-dat0-py7 {
nvidia,pins = "sdmmc1_dat0_py7";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_req_pcc5 { /* D4 GPIO */
+ clk2-req-pcc5 { /* D4 GPIO */
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+ sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- usb_vbus_en2_pff1 { /* D7 GPIO */
+ usb-vbus-en2-pff1 { /* D7 GPIO */
nvidia,pins = "usb_vbus_en2_pff1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SATA1_ACT# */
- dap1_dout_pn2 {
+ dap1-dout-pn2 {
nvidia,pins = "dap1_dout_pn2";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SD1 */
- sdmmc3_clk_pa6 {
+ sdmmc3-clk-pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cmd_pa7 {
+ sdmmc3-cmd-pa7 {
nvidia,pins = "sdmmc3_cmd_pa7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat2_pb5 {
+ sdmmc3-dat2-pb5 {
nvidia,pins = "sdmmc3_dat2_pb5";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat1_pb6 {
+ sdmmc3-dat1-pb6 {
nvidia,pins = "sdmmc3_dat1_pb6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat0_pb7 {
+ sdmmc3-dat0-pb7 {
nvidia,pins = "sdmmc3_dat0_pb7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ sdmmc3-cd-n-pv2 { /* CD# GPIO */
nvidia,pins = "sdmmc3_cd_n_pv2";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* Apalis SPDIF */
- spdif_out_pk5 {
+ spdif-out-pk5 {
nvidia,pins = "spdif_out_pk5";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- spdif_in_pk6 {
+ spdif-in-pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SPI1 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_dir_py1 {
+ ulpi-dir-py1 {
nvidia,pins = "ulpi_dir_py1";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ulpi_nxt_py2 {
+ ulpi-nxt-py2 {
nvidia,pins = "ulpi_nxt_py2";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_stp_py3 {
+ ulpi-stp-py3 {
nvidia,pins = "ulpi_stp_py3";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_txd_pu0 {
+ uart1-txd-pu0 {
nvidia,pins = "pu0";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart1_rxd_pu1 {
+ uart1-rxd-pu1 {
nvidia,pins = "pu1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_cts_n_pu2 {
+ uart1-cts-n-pu2 {
nvidia,pins = "pu2";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_rts_n_pu3 {
+ uart1-rts-n-pu3 {
nvidia,pins = "pu3";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_cts_n_pa1 { /* DSR GPIO */
+ uart3-cts-n-pa1 { /* DSR GPIO */
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart3_rts_n_pc0 { /* DTR GPIO */
+ uart3-rts-n-pc0 { /* DTR GPIO */
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART2 */
- uart2_txd_pc2 {
+ uart2-txd-pc2 {
nvidia,pins = "uart2_txd_pc2";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_cts_n_pj5 {
+ uart2-cts-n-pj5 {
nvidia,pins = "uart2_cts_n_pj5";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_rts_n_pj6 {
+ uart2-rts-n-pj6 {
nvidia,pins = "uart2_rts_n_pj6";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART3 */
- uart3_txd_pw6 {
+ uart3-txd-pw6 {
nvidia,pins = "uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART4 */
- uart4_rxd_pb0 {
+ uart4-rxd-pb0 {
nvidia,pins = "pb0";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart4_txd_pj7 {
+ uart4-txd-pj7 {
nvidia,pins = "pj7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis USBH_EN */
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis USBO1_EN */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis WAKE1_MICO */
- pex_wake_n_pdd3 {
+ pex-wake-n-pdd3 {
nvidia,pins = "pex_wake_n_pdd3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* CORE_PWR_REQ */
- core_pwr_req {
+ core-pwr-req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* CPU_PWR_REQ */
- cpu_pwr_req {
+ cpu-pwr-req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* DVFS */
- dvfs_pwm_px0 {
+ dvfs-pwm-px0 {
nvidia,pins = "dvfs_pwm_px0";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dvfs_clk_px2 {
+ dvfs-clk-px2 {
nvidia,pins = "dvfs_clk_px2";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* eMMC */
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat1_paa1 {
+ sdmmc4-dat1-paa1 {
nvidia,pins = "sdmmc4_dat1_paa1";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat2_paa2 {
+ sdmmc4-dat2-paa2 {
nvidia,pins = "sdmmc4_dat2_paa2";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat3_paa3 {
+ sdmmc4-dat3-paa3 {
nvidia,pins = "sdmmc4_dat3_paa3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat4_paa4 {
+ sdmmc4-dat4-paa4 {
nvidia,pins = "sdmmc4_dat4_paa4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat5_paa5 {
+ sdmmc4-dat5-paa5 {
nvidia,pins = "sdmmc4_dat5_paa5";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat6_paa6 {
+ sdmmc4-dat6-paa6 {
nvidia,pins = "sdmmc4_dat6_paa6";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat7_paa7 {
+ sdmmc4-dat7-paa7 {
nvidia,pins = "sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_cmd_pt7 {
+ sdmmc4-cmd-pt7 {
nvidia,pins = "sdmmc4_cmd_pt7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* JTAG_RTCK */
- jtag_rtck {
+ jtag-rtck {
nvidia,pins = "jtag_rtck";
nvidia,function = "rtck";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_DEV_OFF# */
- ulpi_data5_po6 {
+ ulpi-data5-po6 {
nvidia,pins = "ulpi_data5_po6";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_RESET# */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_WAKE# */
- ulpi_data4_po5 {
+ ulpi-data4-po5 {
nvidia,pins = "ulpi_data4_po5";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* MCU SPI */
- gpio_x4_aud_px4 {
+ gpio-x4-aud-px4 {
nvidia,pins = "gpio_x4_aud_px4";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x5_aud_px5 {
+ gpio-x5-aud-px5 {
nvidia,pins = "gpio_x5_aud_px5";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x6_aud_px6 { /* MCU_CS */
+ gpio-x6-aud-px6 { /* MCU_CS */
nvidia,pins = "gpio_x6_aud_px6";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x7_aud_px7 {
+ gpio-x7-aud-px7 {
nvidia,pins = "gpio_x7_aud_px7";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- gpio_w2_aud_pw2 { /* MCU_CSEZP */
+ gpio-w2-aud-pw2 { /* MCU_CSEZP */
nvidia,pins = "gpio_w2_aud_pw2";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PMIC_CLK_32K */
- clk_32k_in {
+ clk-32k-in {
nvidia,pins = "clk_32k_in";
nvidia,function = "clk";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PMIC_CPU_OC_INT */
- clk_32k_out_pa0 {
+ clk-32k-out-pa0 {
nvidia,pins = "clk_32k_out_pa0";
nvidia,function = "soc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PWR_I2C */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- pwr_i2c_sda_pz7 {
+ pwr-i2c-sda-pz7 {
nvidia,pins = "pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PWR_INT_N */
- pwr_int_n {
+ pwr-int-n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* RESET_OUT_N */
- reset_out_n {
+ reset-out-n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* SHIFT_CTRL_DIR_IN */
- kb_row0_pr0 {
+ kb-row0-pr0 {
nvidia,pins = "kb_row0_pr0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row1_pr1 {
+ kb-row1-pr1 {
nvidia,pins = "kb_row1_pr1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* Configure level-shifter as output for HDA */
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* SHIFT_CTRL_DIR_OUT */
- kb_col5_pq5 {
+ kb-col5-pq5 {
nvidia,pins = "kb_col5_pq5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col6_pq6 {
+ kb-col6-pq6 {
nvidia,pins = "kb_col6_pq6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col7_pq7 {
+ kb-col7-pq7 {
nvidia,pins = "kb_col7_pq7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* SHIFT_CTRL_OE */
- kb_col0_pq0 {
+ kb-col0-pq0 {
nvidia,pins = "kb_col0_pq0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col1_pq1 {
+ kb-col1-pq1 {
nvidia,pins = "kb_col1_pq1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col2_pq2 {
+ kb-col2-pq2 {
nvidia,pins = "kb_col2_pq2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col4_pq4 {
+ kb-col4-pq4 {
nvidia,pins = "kb_col4_pq4";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row2_pr2 {
+ kb-row2-pr2 {
nvidia,pins = "kb_row2_pr2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* TOUCH_INT */
- gpio_w3_aud_pw3 {
+ gpio-w3-aud-pw3 {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 { /* NC */
+ dap1-fs-pn0 { /* NC */
nvidia,pins = "dap1_fs_pn0";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_din_pn1 { /* NC */
+ dap1-din-pn1 { /* NC */
nvidia,pins = "dap1_din_pn1";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_sclk_pn3 { /* NC */
+ dap1-sclk-pn3 { /* NC */
nvidia,pins = "dap1_sclk_pn3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data7_po0 { /* NC */
+ ulpi-data7-po0 { /* NC */
nvidia,pins = "ulpi_data7_po0";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data0_po1 { /* NC */
+ ulpi-data0-po1 { /* NC */
nvidia,pins = "ulpi_data0_po1";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data1_po2 { /* NC */
+ ulpi-data1-po2 { /* NC */
nvidia,pins = "ulpi_data1_po2";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data2_po3 { /* NC */
+ ulpi-data2-po3 { /* NC */
nvidia,pins = "ulpi_data2_po3";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data3_po4 { /* NC */
+ ulpi-data3-po4 { /* NC */
nvidia,pins = "ulpi_data3_po4";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data6_po7 { /* NC */
+ ulpi-data6-po7 { /* NC */
nvidia,pins = "ulpi_data6_po7";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_fs_pp4 { /* NC */
+ dap4-fs-pp4 { /* NC */
nvidia,pins = "dap4_fs_pp4";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_din_pp5 { /* NC */
+ dap4-din-pp5 { /* NC */
nvidia,pins = "dap4_din_pp5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_dout_pp6 { /* NC */
+ dap4-dout-pp6 { /* NC */
nvidia,pins = "dap4_dout_pp6";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_sclk_pp7 { /* NC */
+ dap4-sclk-pp7 { /* NC */
nvidia,pins = "dap4_sclk_pp7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col3_pq3 { /* NC */
+ kb-col3-pq3 { /* NC */
nvidia,pins = "kb_col3_pq3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row3_pr3 { /* NC */
+ kb-row3-pr3 { /* NC */
nvidia,pins = "kb_row3_pr3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row4_pr4 { /* NC */
+ kb-row4-pr4 { /* NC */
nvidia,pins = "kb_row4_pr4";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row5_pr5 { /* NC */
+ kb-row5-pr5 { /* NC */
nvidia,pins = "kb_row5_pr5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row6_pr6 { /* NC */
+ kb-row6-pr6 { /* NC */
nvidia,pins = "kb_row6_pr6";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row7_pr7 { /* NC */
+ kb-row7-pr7 { /* NC */
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row8_ps0 { /* NC */
+ kb-row8-ps0 { /* NC */
nvidia,pins = "kb_row8_ps0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row9_ps1 { /* NC */
+ kb-row9-ps1 { /* NC */
nvidia,pins = "kb_row9_ps1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row12_ps4 { /* NC */
+ kb-row12-ps4 { /* NC */
nvidia,pins = "kb_row12_ps4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row13_ps5 { /* NC */
+ kb-row13-ps5 { /* NC */
nvidia,pins = "kb_row13_ps5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row14_ps6 { /* NC */
+ kb-row14-ps6 { /* NC */
nvidia,pins = "kb_row14_ps6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row15_ps7 { /* NC */
+ kb-row15-ps7 { /* NC */
nvidia,pins = "kb_row15_ps7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row16_pt0 { /* NC */
+ kb-row16-pt0 { /* NC */
nvidia,pins = "kb_row16_pt0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row17_pt1 { /* NC */
+ kb-row17-pt1 { /* NC */
nvidia,pins = "kb_row17_pt1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x1_aud_px1 { /* NC */
+ gpio-x1-aud-px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x3_aud_px3 { /* NC */
+ gpio-x3-aud-px3 { /* NC */
nvidia,pins = "gpio_x3_aud_px3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_req_pee1 { /* NC */
+ clk3-req-pee1 { /* NC */
nvidia,pins = "clk3_req_pee1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_req_pee2 { /* NC */
+ dap-mclk1-req-pee2 { /* NC */
nvidia,pins = "dap_mclk1_req_pee2";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
* SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
* bits being set to 0xfffd according to the TRM!
*/
- sdmmc3_clk_lb_out_pee4 { /* NC */
+ sdmmc3-clk-lb-out-pee4 { /* NC */
nvidia,pins = "sdmmc3_clk_lb_out_pee4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <®_3v3>;
- VDDIO-supply = <&vddio_1v8>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vddio>;
+ VDDIO-supply = <®_1v8_vddio>;
clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
};
pinctrl-0 = <&as3722_default>;
as3722_default: pinmux {
- gpio2_7 {
+ gpio2-7 {
pins = "gpio2", /* PWR_EN_+V3.3 */
"gpio7"; /* +V1.6_LPO */
function = "gpio";
bias-pull-up;
};
- gpio0_1_3_4_5_6 {
+ gpio0-1-3-4-5-6 {
pins = "gpio0", "gpio1", "gpio3",
"gpio4", "gpio5", "gpio6";
bias-high-impedance;
};
regulators {
- vsup-sd2-supply = <®_3v3>;
- vsup-sd3-supply = <®_3v3>;
- vsup-sd4-supply = <®_3v3>;
- vsup-sd5-supply = <®_3v3>;
- vin-ldo0-supply = <&vddio_ddr_1v35>;
- vin-ldo1-6-supply = <®_3v3>;
- vin-ldo2-5-7-supply = <&vddio_1v8>;
- vin-ldo3-4-supply = <®_3v3>;
- vin-ldo9-10-supply = <®_3v3>;
- vin-ldo11-supply = <®_3v3>;
-
- vdd_cpu: sd0 {
+ vsup-sd2-supply = <®_module_3v3>;
+ vsup-sd3-supply = <®_module_3v3>;
+ vsup-sd4-supply = <®_module_3v3>;
+ vsup-sd5-supply = <®_module_3v3>;
+ vin-ldo0-supply = <®_1v35_vddio_ddr>;
+ vin-ldo1-6-supply = <®_module_3v3>;
+ vin-ldo2-5-7-supply = <®_1v8_vddio>;
+ vin-ldo3-4-supply = <®_module_3v3>;
+ vin-ldo9-10-supply = <®_module_3v3>;
+ vin-ldo11-supply = <®_module_3v3>;
+
+ reg_vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
ams,ext-control = <1>;
};
- vddio_ddr_1v35: sd2 {
+ reg_1v35_vddio_ddr: sd2 {
regulator-name =
"+V1.35_VDDIO_DDR(sd2)";
regulator-min-microvolt = <1350000>;
regulator-boot-on;
};
- vdd_1v05: sd4 {
+ reg_1v05_vdd: sd4 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddio_1v8: sd5 {
+ reg_1v8_vddio: sd5 {
regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- vdd_gpu: sd6 {
+ reg_vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- avdd_1v05: ldo0 {
+ reg_1v05_avdd: ldo0 {
regulator-name = "+V1.05_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
* TMP451 temperature sensor
* Note: THERM_N directly connected to AS3722 PMIC THERM
*/
- temperature-sensor@4c {
+ temp-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
+ vcc-supply = <®_module_3v3>;
};
};
sata@70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
- avdd-supply = <&vdd_1v05>;
- hvdd-supply = <®_3v3>;
- vddio-supply = <&vdd_1v05>;
+ avdd-supply = <®_1v05_vdd>;
+ hvdd-supply = <®_module_3v3>;
+ vddio-supply = <®_1v05_vdd>;
};
usb@70090000 {
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- avdd-pll-utmip-supply = <&vddio_1v8>;
- avdd-usb-ss-pll-supply = <&vdd_1v05>;
- avdd-usb-supply = <®_3v3>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-usb-ss-pll-e-supply = <®_3v3>;
- hvdd-usb-ss-supply = <®_3v3>;
+ avddio-pex-supply = <®_1v05_vdd>;
+ avdd-pll-erefe-supply = <®_1v05_avdd>;
+ avdd-pll-utmip-supply = <®_1v8_vddio>;
+ avdd-usb-ss-pll-supply = <®_1v05_vdd>;
+ avdd-usb-supply = <®_module_3v3>;
+ dvddio-pex-supply = <®_1v05_vdd>;
+ hvdd-usb-ss-pll-e-supply = <®_module_3v3>;
+ hvdd-usb-ss-supply = <®_module_3v3>;
};
padctl@7009f000 {
lanes {
usb2-0 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-1 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-2 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
};
};
lanes {
pcie-0 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-1 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-2 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-3 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-4 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
};
};
lanes {
sata-0 {
- nvidia,function = "sata";
status = "okay";
+ nvidia,function = "sata";
};
};
};
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <®_usbo1_vbus>;
};
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
usb3-0 {
- nvidia,usb2-companion = <2>;
status = "okay";
+ nvidia,usb2-companion = <2>;
+ vbus-supply = <®_usbh_vbus>;
};
usb3-1 {
- nvidia,usb2-companion = <0>;
status = "okay";
+ nvidia,usb2-companion = <0>;
+ vbus-supply = <®_usbo1_vbus>;
};
};
};
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vddio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
/* CPU DFLL clock */
clock@70110000 {
status = "okay";
- vdd-cpu-supply = <&vdd_cpu>;
nvidia,i2c-fs-rate = <400000>;
+ vdd-cpu-supply = <®_vdd_cpu>;
};
ahub@70300000 {
};
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
cpus {
cpu@0 {
- vdd-cpu-supply = <&vdd_cpu>;
+ vdd-cpu-supply = <®_vdd_cpu>;
};
};
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05>;
+ vin-supply = <®_1v05_vdd>;
};
reg_3v3_mxm: regulator-3v3-mxm {
regulator-boot-on;
};
- reg_3v3: regulator-3v3 {
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_1v05_vdd>;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
vin-supply = <®_3v3_mxm>;
};
- reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
- regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_1v05>;
+ regulator-always-on;
};
sound {
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan_reset_n {
+ lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset_moci_ctrl {
+ reset-moci-ctrl {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
* Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A
*/
/ {
- model = "Toradex Apalis TK1";
- compatible = "toradex,apalis-tk1", "nvidia,tegra124";
-
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x80000000>;
};
pcie@1003000 {
status = "okay";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pex-pll-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-pex-pll-e-supply = <®_3v3>;
- hvdd-pex-supply = <®_3v3>;
- vddio-pex-ctl-supply = <®_3v3>;
+ avddio-pex-supply = <®_1v05_vdd>;
+ avdd-pex-pll-supply = <®_1v05_vdd>;
+ avdd-pll-erefe-supply = <®_1v05_avdd>;
+ dvddio-pex-supply = <®_1v05_vdd>;
+ hvdd-pex-pll-e-supply = <®_module_3v3>;
+ hvdd-pex-supply = <®_module_3v3>;
+ vddio-pex-ctl-supply = <®_module_3v3>;
/* Apalis PCIe (additional lane Apalis type specific) */
pci@1,0 {
phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>;
phy-names = "pcie-0";
status = "okay";
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- pll-supply = <®_1v05_avdd_hdmi_pll>;
- vdd-supply = <®_3v3_avdd_hdmi>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <®_1v05_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
* Node left disabled on purpose - the bootloader will enable
* it after having set the VPR up
*/
- vdd-supply = <&vdd_gpu>;
+ vdd-supply = <®_vdd_gpu>;
};
- pinmux: pinmux@70000868 {
+ pinmux@70000868 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
/* Analogue Audio (On-module) */
- dap3_fs_pp0 {
+ dap3-fs-pp0 {
nvidia,pins = "dap3_fs_pp0";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_din_pp1 {
+ dap3-din-pp1 {
nvidia,pins = "dap3_din_pp1";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap3_dout_pp2 {
+ dap3-dout-pp2 {
nvidia,pins = "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_sclk_pp3 {
+ dap3-sclk-pp3 {
nvidia,pins = "dap3_sclk_pp3";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_pw4 {
+ dap-mclk1-pw4 {
nvidia,pins = "dap_mclk1_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis CAM1_MCLK */
- cam_mclk_pcc0 {
+ cam-mclk-pcc0 {
nvidia,pins = "cam_mclk_pcc0";
nvidia,function = "vi_alt3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis Digital Audio */
- dap2_fs_pa2 {
+ dap2-fs-pa2 {
nvidia,pins = "dap2_fs_pa2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_sclk_pa3 {
+ dap2-sclk-pa3 {
nvidia,pins = "dap2_sclk_pa3";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_din_pa4 {
+ dap2-din-pa4 {
nvidia,pins = "dap2_din_pa4";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dap2_dout_pa5 {
+ dap2-dout-pa5 {
nvidia,pins = "dap2_dout_pa5";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_out_pee0 {
+ clk3-out-pee0 {
nvidia,pins = "clk3_out_pee0";
nvidia,function = "extperiph3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis GPIO */
- ddc_scl_pv4 {
+ ddc-scl-pv4 {
nvidia,pins = "ddc_scl_pv4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ddc_sda_pv5 {
+ ddc-sda-pv5 {
nvidia,pins = "ddc_sda_pv5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_rst_n_pdd1 {
+ pex-l0-rst-n-pdd1 {
nvidia,pins = "pex_l0_rst_n_pdd1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l0_clkreq_n_pdd2 {
+ pex-l0-clkreq-n-pdd2 {
nvidia,pins = "pex_l0_clkreq_n_pdd2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_rst_n_pdd5 {
+ pex-l1-rst-n-pdd5 {
nvidia,pins = "pex_l1_rst_n_pdd5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- pex_l1_clkreq_n_pdd6 {
+ pex-l1-clkreq-n-pdd6 {
nvidia,pins = "pex_l1_clkreq_n_pdd6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- dp_hpd_pff0 {
+ dp-hpd-pff0 {
nvidia,pins = "dp_hpd_pff0";
nvidia,function = "dp";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis HDMI1_CEC */
- hdmi_cec_pee3 {
+ hdmi-cec-pee3 {
nvidia,pins = "hdmi_cec_pee3";
nvidia,function = "cec";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis HDMI1_HPD */
- hdmi_int_pn7 {
+ hdmi-int-pn7 {
nvidia,pins = "hdmi_int_pn7";
nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* Apalis I2C1 */
- gen1_i2c_scl_pc4 {
+ gen1-i2c-scl-pc4 {
nvidia,pins = "gen1_i2c_scl_pc4";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen1_i2c_sda_pc5 {
+ gen1-i2c-sda-pc5 {
nvidia,pins = "gen1_i2c_sda_pc5";
nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis I2C2 (DDC) */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis I2C3 (CAM) */
- cam_i2c_scl_pbb1 {
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- cam_i2c_sda_pbb2 {
+ cam-i2c-sda-pbb2 {
nvidia,pins = "cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis MMC1 */
- sdmmc1_cd_n_pv3 { /* CD# GPIO */
+ sdmmc1-cd-n-pv3 { /* CD# GPIO */
nvidia,pins = "sdmmc1_wp_n_pv3";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_out_pw5 { /* D5 GPIO */
+ clk2-out-pw5 { /* D5 GPIO */
nvidia,pins = "clk2_out_pw5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat3_py4 {
+ sdmmc1-dat3-py4 {
nvidia,pins = "sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat2_py5 {
+ sdmmc1-dat2-py5 {
nvidia,pins = "sdmmc1_dat2_py5";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat1_py6 {
+ sdmmc1-dat1-py6 {
nvidia,pins = "sdmmc1_dat1_py6";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_dat0_py7 {
+ sdmmc1-dat0-py7 {
nvidia,pins = "sdmmc1_dat0_py7";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- clk2_req_pcc5 { /* D4 GPIO */
+ clk2-req-pcc5 { /* D4 GPIO */
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */
+ sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */
nvidia,pins = "sdmmc3_clk_lb_in_pee5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- usb_vbus_en2_pff1 { /* D7 GPIO */
+ usb-vbus-en2-pff1 { /* D7 GPIO */
nvidia,pins = "usb_vbus_en2_pff1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SATA1_ACT# */
- dap1_dout_pn2 {
+ dap1-dout-pn2 {
nvidia,pins = "dap1_dout_pn2";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SD1 */
- sdmmc3_clk_pa6 {
+ sdmmc3-clk-pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cmd_pa7 {
+ sdmmc3-cmd-pa7 {
nvidia,pins = "sdmmc3_cmd_pa7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat2_pb5 {
+ sdmmc3-dat2-pb5 {
nvidia,pins = "sdmmc3_dat2_pb5";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat1_pb6 {
+ sdmmc3-dat1-pb6 {
nvidia,pins = "sdmmc3_dat1_pb6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_dat0_pb7 {
+ sdmmc3-dat0-pb7 {
nvidia,pins = "sdmmc3_dat0_pb7";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc3_cd_n_pv2 { /* CD# GPIO */
+ sdmmc3-cd-n-pv2 { /* CD# GPIO */
nvidia,pins = "sdmmc3_cd_n_pv2";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* Apalis SPDIF */
- spdif_out_pk5 {
+ spdif-out-pk5 {
nvidia,pins = "spdif_out_pk5";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- spdif_in_pk6 {
+ spdif-in-pk6 {
nvidia,pins = "spdif_in_pk6";
nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis SPI1 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_dir_py1 {
+ ulpi-dir-py1 {
nvidia,pins = "ulpi_dir_py1";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- ulpi_nxt_py2 {
+ ulpi-nxt-py2 {
nvidia,pins = "ulpi_nxt_py2";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_stp_py3 {
+ ulpi-stp-py3 {
nvidia,pins = "ulpi_stp_py3";
nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_txd_pu0 {
+ uart1-txd-pu0 {
nvidia,pins = "pu0";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart1_rxd_pu1 {
+ uart1-rxd-pu1 {
nvidia,pins = "pu1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_cts_n_pu2 {
+ uart1-cts-n-pu2 {
nvidia,pins = "pu2";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart1_rts_n_pu3 {
+ uart1-rts-n-pu3 {
nvidia,pins = "pu3";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_cts_n_pa1 { /* DSR GPIO */
+ uart3-cts-n-pa1 { /* DSR GPIO */
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart3_rts_n_pc0 { /* DTR GPIO */
+ uart3-rts-n-pc0 { /* DTR GPIO */
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART2 */
- uart2_txd_pc2 {
+ uart2-txd-pc2 {
nvidia,pins = "uart2_txd_pc2";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3";
nvidia,function = "irda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_cts_n_pj5 {
+ uart2-cts-n-pj5 {
nvidia,pins = "uart2_cts_n_pj5";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart2_rts_n_pj6 {
+ uart2-rts-n-pj6 {
nvidia,pins = "uart2_rts_n_pj6";
nvidia,function = "uartb";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART3 */
- uart3_txd_pw6 {
+ uart3-txd-pw6 {
nvidia,pins = "uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7";
nvidia,function = "uartc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis UART4 */
- uart4_rxd_pb0 {
+ uart4-rxd-pb0 {
nvidia,pins = "pb0";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- uart4_txd_pj7 {
+ uart4-txd-pj7 {
nvidia,pins = "pj7";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis USBH_EN */
- usb_vbus_en1_pn5 {
+ usb-vbus-en1-pn5 {
nvidia,pins = "usb_vbus_en1_pn5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis USBO1_EN */
- usb_vbus_en0_pn4 {
+ usb-vbus-en0-pn4 {
nvidia,pins = "usb_vbus_en0_pn4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis WAKE1_MICO */
- pex_wake_n_pdd3 {
+ pex-wake-n-pdd3 {
nvidia,pins = "pex_wake_n_pdd3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* CORE_PWR_REQ */
- core_pwr_req {
+ core-pwr-req {
nvidia,pins = "core_pwr_req";
nvidia,function = "pwron";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* CPU_PWR_REQ */
- cpu_pwr_req {
+ cpu-pwr-req {
nvidia,pins = "cpu_pwr_req";
nvidia,function = "cpu";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* DVFS */
- dvfs_pwm_px0 {
+ dvfs-pwm-px0 {
nvidia,pins = "dvfs_pwm_px0";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dvfs_clk_px2 {
+ dvfs-clk-px2 {
nvidia,pins = "dvfs_clk_px2";
nvidia,function = "cldvfs";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* eMMC */
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat1_paa1 {
+ sdmmc4-dat1-paa1 {
nvidia,pins = "sdmmc4_dat1_paa1";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat2_paa2 {
+ sdmmc4-dat2-paa2 {
nvidia,pins = "sdmmc4_dat2_paa2";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat3_paa3 {
+ sdmmc4-dat3-paa3 {
nvidia,pins = "sdmmc4_dat3_paa3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat4_paa4 {
+ sdmmc4-dat4-paa4 {
nvidia,pins = "sdmmc4_dat4_paa4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat5_paa5 {
+ sdmmc4-dat5-paa5 {
nvidia,pins = "sdmmc4_dat5_paa5";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat6_paa6 {
+ sdmmc4-dat6-paa6 {
nvidia,pins = "sdmmc4_dat6_paa6";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat7_paa7 {
+ sdmmc4-dat7-paa7 {
nvidia,pins = "sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_cmd_pt7 {
+ sdmmc4-cmd-pt7 {
nvidia,pins = "sdmmc4_cmd_pt7";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* JTAG_RTCK */
- jtag_rtck {
+ jtag-rtck {
nvidia,pins = "jtag_rtck";
nvidia,function = "rtck";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_DEV_OFF# */
- ulpi_data5_po6 {
+ ulpi-data5-po6 {
nvidia,pins = "ulpi_data5_po6";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_RESET# */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* LAN_WAKE# */
- ulpi_data4_po5 {
+ ulpi-data4-po5 {
nvidia,pins = "ulpi_data4_po5";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* MCU SPI */
- gpio_x4_aud_px4 {
+ gpio-x4-aud-px4 {
nvidia,pins = "gpio_x4_aud_px4";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x5_aud_px5 {
+ gpio-x5-aud-px5 {
nvidia,pins = "gpio_x5_aud_px5";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x6_aud_px6 { /* MCU_CS */
+ gpio-x6-aud-px6 { /* MCU_CS */
nvidia,pins = "gpio_x6_aud_px6";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x7_aud_px7 {
+ gpio-x7-aud-px7 {
nvidia,pins = "gpio_x7_aud_px7";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- gpio_w2_aud_pw2 { /* MCU_CSEZP */
+ gpio-w2-aud-pw2 { /* MCU_CSEZP */
nvidia,pins = "gpio_w2_aud_pw2";
nvidia,function = "spi2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PMIC_CLK_32K */
- clk_32k_in {
+ clk-32k-in {
nvidia,pins = "clk_32k_in";
nvidia,function = "clk";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PMIC_CPU_OC_INT */
- clk_32k_out_pa0 {
+ clk-32k-out-pa0 {
nvidia,pins = "clk_32k_out_pa0";
nvidia,function = "soc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PWR_I2C */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
- pwr_i2c_sda_pz7 {
+ pwr-i2c-sda-pz7 {
nvidia,pins = "pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* PWR_INT_N */
- pwr_int_n {
+ pwr-int-n {
nvidia,pins = "pwr_int_n";
nvidia,function = "pmi";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* RESET_OUT_N */
- reset_out_n {
+ reset-out-n {
nvidia,pins = "reset_out_n";
nvidia,function = "reset_out_n";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* SHIFT_CTRL_DIR_IN */
- kb_row0_pr0 {
+ kb-row0-pr0 {
nvidia,pins = "kb_row0_pr0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row1_pr1 {
+ kb-row1-pr1 {
nvidia,pins = "kb_row1_pr1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* Configure level-shifter as output for HDA */
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* SHIFT_CTRL_DIR_OUT */
- kb_col5_pq5 {
+ kb-col5-pq5 {
nvidia,pins = "kb_col5_pq5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col6_pq6 {
+ kb-col6-pq6 {
nvidia,pins = "kb_col6_pq6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col7_pq7 {
+ kb-col7-pq7 {
nvidia,pins = "kb_col7_pq7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
};
/* SHIFT_CTRL_OE */
- kb_col0_pq0 {
+ kb-col0-pq0 {
nvidia,pins = "kb_col0_pq0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col1_pq1 {
+ kb-col1-pq1 {
nvidia,pins = "kb_col1_pq1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col2_pq2 {
+ kb-col2-pq2 {
nvidia,pins = "kb_col2_pq2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col4_pq4 {
+ kb-col4-pq4 {
nvidia,pins = "kb_col4_pq4";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row2_pr2 {
+ kb-row2-pr2 {
nvidia,pins = "kb_row2_pr2";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
};
/* TOUCH_INT */
- gpio_w3_aud_pw3 {
+ gpio-w3-aud-pw3 {
nvidia,pins = "gpio_w3_aud_pw3";
nvidia,function = "spi6";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 { /* NC */
+ dap1-fs-pn0 { /* NC */
nvidia,pins = "dap1_fs_pn0";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_din_pn1 { /* NC */
+ dap1-din-pn1 { /* NC */
nvidia,pins = "dap1_din_pn1";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_sclk_pn3 { /* NC */
+ dap1-sclk-pn3 { /* NC */
nvidia,pins = "dap1_sclk_pn3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data7_po0 { /* NC */
+ ulpi-data7-po0 { /* NC */
nvidia,pins = "ulpi_data7_po0";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data0_po1 { /* NC */
+ ulpi-data0-po1 { /* NC */
nvidia,pins = "ulpi_data0_po1";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data1_po2 { /* NC */
+ ulpi-data1-po2 { /* NC */
nvidia,pins = "ulpi_data1_po2";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data2_po3 { /* NC */
+ ulpi-data2-po3 { /* NC */
nvidia,pins = "ulpi_data2_po3";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data3_po4 { /* NC */
+ ulpi-data3-po4 { /* NC */
nvidia,pins = "ulpi_data3_po4";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- ulpi_data6_po7 { /* NC */
+ ulpi-data6-po7 { /* NC */
nvidia,pins = "ulpi_data6_po7";
nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_fs_pp4 { /* NC */
+ dap4-fs-pp4 { /* NC */
nvidia,pins = "dap4_fs_pp4";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_din_pp5 { /* NC */
+ dap4-din-pp5 { /* NC */
nvidia,pins = "dap4_din_pp5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_dout_pp6 { /* NC */
+ dap4-dout-pp6 { /* NC */
nvidia,pins = "dap4_dout_pp6";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap4_sclk_pp7 { /* NC */
+ dap4-sclk-pp7 { /* NC */
nvidia,pins = "dap4_sclk_pp7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_col3_pq3 { /* NC */
+ kb-col3-pq3 { /* NC */
nvidia,pins = "kb_col3_pq3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row3_pr3 { /* NC */
+ kb-row3-pr3 { /* NC */
nvidia,pins = "kb_row3_pr3";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row4_pr4 { /* NC */
+ kb-row4-pr4 { /* NC */
nvidia,pins = "kb_row4_pr4";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row5_pr5 { /* NC */
+ kb-row5-pr5 { /* NC */
nvidia,pins = "kb_row5_pr5";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row6_pr6 { /* NC */
+ kb-row6-pr6 { /* NC */
nvidia,pins = "kb_row6_pr6";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row7_pr7 { /* NC */
+ kb-row7-pr7 { /* NC */
nvidia,pins = "kb_row7_pr7";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row8_ps0 { /* NC */
+ kb-row8-ps0 { /* NC */
nvidia,pins = "kb_row8_ps0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row9_ps1 { /* NC */
+ kb-row9-ps1 { /* NC */
nvidia,pins = "kb_row9_ps1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row12_ps4 { /* NC */
+ kb-row12-ps4 { /* NC */
nvidia,pins = "kb_row12_ps4";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row13_ps5 { /* NC */
+ kb-row13-ps5 { /* NC */
nvidia,pins = "kb_row13_ps5";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row14_ps6 { /* NC */
+ kb-row14-ps6 { /* NC */
nvidia,pins = "kb_row14_ps6";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row15_ps7 { /* NC */
+ kb-row15-ps7 { /* NC */
nvidia,pins = "kb_row15_ps7";
nvidia,function = "rsvd3";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row16_pt0 { /* NC */
+ kb-row16-pt0 { /* NC */
nvidia,pins = "kb_row16_pt0";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- kb_row17_pt1 { /* NC */
+ kb-row17-pt1 { /* NC */
nvidia,pins = "kb_row17_pt1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x1_aud_px1 { /* NC */
+ gpio-x1-aud-px1 { /* NC */
nvidia,pins = "gpio_x1_aud_px1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- gpio_x3_aud_px3 { /* NC */
+ gpio-x3-aud-px3 { /* NC */
nvidia,pins = "gpio_x3_aud_px3";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- clk3_req_pee1 { /* NC */
+ clk3-req-pee1 { /* NC */
nvidia,pins = "clk3_req_pee1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap_mclk1_req_pee2 { /* NC */
+ dap-mclk1-req-pee2 { /* NC */
nvidia,pins = "dap_mclk1_req_pee2";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
* SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1
* bits being set to 0xfffd according to the TRM!
*/
- sdmmc3_clk_lb_out_pee4 { /* NC */
+ sdmmc3-clk-lb-out-pee4 { /* NC */
nvidia,pins = "sdmmc3_clk_lb_out_pee4";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <®_3v3>;
- VDDIO-supply = <&vddio_1v8>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vddio>;
+ VDDIO-supply = <®_1v8_vddio>;
clocks = <&tegra_car TEGRA124_CLK_EXTERN1>;
};
pinctrl-0 = <&as3722_default>;
as3722_default: pinmux {
- gpio2_7 {
+ gpio2-7 {
pins = "gpio2", /* PWR_EN_+V3.3 */
"gpio7"; /* +V1.6_LPO */
function = "gpio";
bias-pull-up;
};
- gpio0_1_3_4_5_6 {
+ gpio0-1-3-4-5-6 {
pins = "gpio0", "gpio1", "gpio3",
"gpio4", "gpio5", "gpio6";
bias-high-impedance;
};
regulators {
- vsup-sd2-supply = <®_3v3>;
- vsup-sd3-supply = <®_3v3>;
- vsup-sd4-supply = <®_3v3>;
- vsup-sd5-supply = <®_3v3>;
- vin-ldo0-supply = <&vddio_ddr_1v35>;
- vin-ldo1-6-supply = <®_3v3>;
- vin-ldo2-5-7-supply = <&vddio_1v8>;
- vin-ldo3-4-supply = <®_3v3>;
- vin-ldo9-10-supply = <®_3v3>;
- vin-ldo11-supply = <®_3v3>;
-
- vdd_cpu: sd0 {
+ vsup-sd2-supply = <®_module_3v3>;
+ vsup-sd3-supply = <®_module_3v3>;
+ vsup-sd4-supply = <®_module_3v3>;
+ vsup-sd5-supply = <®_module_3v3>;
+ vin-ldo0-supply = <®_1v35_vddio_ddr>;
+ vin-ldo1-6-supply = <®_module_3v3>;
+ vin-ldo2-5-7-supply = <®_1v8_vddio>;
+ vin-ldo3-4-supply = <®_module_3v3>;
+ vin-ldo9-10-supply = <®_module_3v3>;
+ vin-ldo11-supply = <®_module_3v3>;
+
+ reg_vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
ams,ext-control = <1>;
};
- vddio_ddr_1v35: sd2 {
+ reg_1v35_vddio_ddr: sd2 {
regulator-name =
"+V1.35_VDDIO_DDR(sd2)";
regulator-min-microvolt = <1350000>;
regulator-boot-on;
};
- vdd_1v05: sd4 {
+ reg_1v05_vdd: sd4 {
regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- vddio_1v8: sd5 {
+ reg_1v8_vddio: sd5 {
regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- vdd_gpu: sd6 {
+ reg_vdd_gpu: sd6 {
regulator-name = "+VDD_GPU_AP";
regulator-min-microvolt = <650000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- avdd_1v05: ldo0 {
+ reg_1v05_avdd: ldo0 {
regulator-name = "+V1.05_AVDD";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
* TMP451 temperature sensor
* Note: THERM_N directly connected to AS3722 PMIC THERM
*/
- temperature-sensor@4c {
+ temp-sensor@4c {
compatible = "ti,tmp451";
reg = <0x4c>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
#thermal-sensor-cells = <1>;
+ vcc-supply = <®_module_3v3>;
};
};
sata@70020000 {
phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
phy-names = "sata-0";
- avdd-supply = <&vdd_1v05>;
- hvdd-supply = <®_3v3>;
- vddio-supply = <&vdd_1v05>;
+ avdd-supply = <®_1v05_vdd>;
+ hvdd-supply = <®_module_3v3>;
+ vddio-supply = <®_1v05_vdd>;
};
usb@70090000 {
<&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
<&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
- avddio-pex-supply = <&vdd_1v05>;
- avdd-pll-erefe-supply = <&avdd_1v05>;
- avdd-pll-utmip-supply = <&vddio_1v8>;
- avdd-usb-ss-pll-supply = <&vdd_1v05>;
- avdd-usb-supply = <®_3v3>;
- dvddio-pex-supply = <&vdd_1v05>;
- hvdd-usb-ss-pll-e-supply = <®_3v3>;
- hvdd-usb-ss-supply = <®_3v3>;
+ avddio-pex-supply = <®_1v05_vdd>;
+ avdd-pll-erefe-supply = <®_1v05_avdd>;
+ avdd-pll-utmip-supply = <®_1v8_vddio>;
+ avdd-usb-ss-pll-supply = <®_1v05_vdd>;
+ avdd-usb-supply = <®_module_3v3>;
+ dvddio-pex-supply = <®_1v05_vdd>;
+ hvdd-usb-ss-pll-e-supply = <®_module_3v3>;
+ hvdd-usb-ss-supply = <®_module_3v3>;
};
padctl@7009f000 {
lanes {
usb2-0 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-1 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
usb2-2 {
- nvidia,function = "xusb";
status = "okay";
+ nvidia,function = "xusb";
};
};
};
lanes {
pcie-0 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-1 {
- nvidia,function = "usb3-ss";
status = "okay";
+ nvidia,function = "usb3-ss";
};
pcie-2 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-3 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
pcie-4 {
- nvidia,function = "pcie";
status = "okay";
+ nvidia,function = "pcie";
};
};
};
lanes {
sata-0 {
- nvidia,function = "sata";
status = "okay";
+ nvidia,function = "sata";
};
};
};
usb2-0 {
status = "okay";
mode = "otg";
-
vbus-supply = <®_usbo1_vbus>;
};
usb2-1 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
usb2-2 {
status = "okay";
mode = "host";
-
vbus-supply = <®_usbh_vbus>;
};
usb3-0 {
- nvidia,usb2-companion = <2>;
status = "okay";
+ nvidia,usb2-companion = <2>;
+ vbus-supply = <®_usbh_vbus>;
};
usb3-1 {
- nvidia,usb2-companion = <0>;
status = "okay";
+ nvidia,usb2-companion = <0>;
+ vbus-supply = <®_usbo1_vbus>;
};
};
};
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vddio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
/* CPU DFLL clock */
clock@70110000 {
status = "okay";
- vdd-cpu-supply = <&vdd_cpu>;
nvidia,i2c-fs-rate = <400000>;
+ vdd-cpu-supply = <®_vdd_cpu>;
};
ahub@70300000 {
};
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk32k_in: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
cpus {
cpu@0 {
- vdd-cpu-supply = <&vdd_cpu>;
+ vdd-cpu-supply = <®_vdd_cpu>;
};
};
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
- vin-supply = <&vdd_1v05>;
+ vin-supply = <®_1v05_vdd>;
};
reg_3v3_mxm: regulator-3v3-mxm {
regulator-boot-on;
};
- reg_3v3: regulator-3v3 {
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_1v05_vdd>;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
vin-supply = <®_3v3_mxm>;
};
- reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ reg_module_3v3_audio: regulator-module-3v3-audio {
compatible = "regulator-fixed";
- regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- vin-supply = <&vdd_1v05>;
+ regulator-always-on;
};
sound {
&gpio {
/* I210 Gigabit Ethernet Controller Reset */
- lan_reset_n {
+ lan-reset-n {
gpio-hog;
gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
output-high;
};
/* Control MXM3 pin 26 Reset Module Output Carrier Input */
- reset_moci_ctrl {
+ reset-moci-ctrl {
gpio-hog;
gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
output-high;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra20-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri T20 on Colibri Evaluation Board";
+ compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20",
+ "nvidia,tegra20";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@34";
+ rtc2 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartd;
+ serial2 = &uartb;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
+ hdmi@54280000 {
+ status = "okay";
+ hdmi-supply = <®_5v0>;
+ };
+ };
+
+ pinmux@70000014 {
+ state_default: pinmux {
+ bl-on {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ddc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ hotplug-detect {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ i2c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lcd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lm1 {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmccd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-a-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-c-d {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ssp {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-a {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ uart-c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ usbh-pen {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ };
+ };
+
+ /* Colibri UART-A */
+ serial@70006000 {
+ status = "okay";
+ };
+
+ /* Colibri UART-C */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Colibri UART-B */
+ serial@70006300 {
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
+ /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+ i2c@7000c400 {
+ status = "okay";
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
+ usb@c5000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb-phy@c5000000 {
+ status = "okay";
+ vbus-supply = <®_usbc_vbus>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
+ usb@c5008000 {
+ status = "okay";
+ };
+
+ usb-phy@c5008000 {
+ status = "okay";
+ vbus-supply = <®_usbh_vbus>;
+ };
+
+ /* SPI4: Colibri SSP */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ /* CAN_INT */
+ interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ vdd-supply = <®_3v3>;
+ xceiver-supply = <®_5v0>;
+ };
+ };
+
+ /* SD/MMC */
+ sdhci@c8000600 {
+ status = "okay";
+ bus-width = <4>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+ no-1-8-v;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
+ };
+
+ clk16m: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "SODIMM pin 45 wakeup";
+ gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v0>;
+ };
+
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <®_5v0>;
+ };
+};
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra20-colibri.dtsi"
/ {
- model = "Toradex Colibri T20 256/512 MB on Iris";
- compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
+ model = "Toradex Colibri T20 on Iris";
+ compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20",
+ "nvidia,tegra20";
aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@34";
+ rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartd;
+ serial2 = &uartb;
};
chosen {
};
host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
pinmux@70000014 {
state_default: pinmux {
- hdint {
+ bl-on {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ddc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ hotplug-detect {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ i2c {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lcd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ lm1 {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmc {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ mmccd {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-a-b {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ pwm-c-d {
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ ssp {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- i2cddc {
+ uart-a {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdio4 {
+ uart-b {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- uarta {
+ uart-c {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- uartd {
+ usbh-pen {
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
};
};
+ /* Colibri UART-A */
serial@70006000 {
status = "okay";
};
+ /* Colibri UART-C */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Colibri UART-B */
serial@70006300 {
status = "okay";
};
- i2c_ddc: i2c@7000c400 {
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
+ /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
+ i2c@7000c400 {
status = "okay";
};
+ /* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@c5000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@c5000000 {
status = "okay";
+ vbus-supply = <®_usbc_vbus>;
};
+ /* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb@c5008000 {
status = "okay";
};
usb-phy@c5008000 {
status = "okay";
+ vbus-supply = <®_usbh_vbus>;
+ };
+
+ /* SPI4: Colibri SSP */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
};
+ /* SD/MMC */
sdhci@c8000600 {
status = "okay";
bus-width = <4>;
- vmmc-supply = <&vcc_sd_reg>;
- vqmmc-supply = <&vcc_sd_reg>;
- };
-
- regulators {
- regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_host_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
- };
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
+ no-1-8-v;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 128 64 32 16 8 4 0>;
+ default-brightness-level = <6>;
+ /* BL_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
- vcc_sd_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
+ wakeup {
+ label = "SODIMM pin 45 wakeup";
+ gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
};
};
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v0>;
+ };
+
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <®_5v0>;
+ };
};
// SPDX-License-Identifier: GPL-2.0
#include "tegra20.dtsi"
+/*
+ * Toradex Colibri T20 Module Device Tree
+ * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A;
+ * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A;
+ * Colibri T20 512MB IT V1.2A
+ */
/ {
- model = "Toradex Colibri T20 256/512 MB";
- compatible = "toradex,colibri_t20-512", "nvidia,tegra20";
-
- aliases {
- rtc0 = "/i2c@7000d000/tps6586x@34";
- rtc1 = "/rtc@7000e000";
- };
-
memory@0 {
/*
* Set memory to 256 MB to be safe as this could be used on
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&hdmi_vdd_reg>;
- pll-supply = <&hdmi_pll_reg>;
-
- nvidia,ddc-i2c-bus = <&i2c_ddc>;
- nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
- GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
pinctrl-0 = <&state_default>;
state_default: pinmux {
- audio_refclk {
+ /* Analogue Audio AC97 to WM9712 (On-module) */
+ audio-refclk {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- crt {
- nvidia,pins = "crtp";
- nvidia,function = "crt";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- displaya {
- nvidia,pins = "ld0", "ld1", "ld2", "ld3",
- "ld4", "ld5", "ld6", "ld7", "ld8",
- "ld9", "ld10", "ld11", "ld12", "ld13",
- "ld14", "ld15", "ld16", "ld17",
- "lhs", "lpw0", "lpw2", "lsc0",
- "lsc1", "lsck", "lsda", "lspi", "lvs";
- nvidia,function = "displaya";
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
- gpio_dte {
- nvidia,pins = "dte";
- nvidia,function = "rsvd1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
- gpio_gmi {
- nvidia,pins = "ata", "atc", "atd", "ate",
- "dap1", "dap2", "dap4", "gpu", "irrx",
- "irtx", "spia", "spib", "spic";
- nvidia,function = "gmi";
+
+ /*
+ * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ
+ * (All on-module), SODIMM Pin 45 Wakeup
+ */
+ gpio-uac {
+ nvidia,pins = "uac";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- gpio_pta {
+
+ /*
+ * Buffer Enables for nPWE and RDnWR (On-module,
+ * see GPIO hogging further down below)
+ */
+ gpio-pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- gpio_uac {
- nvidia,pins = "uac";
- nvidia,function = "rsvd2";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+
+ /*
+ * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N,
+ * SYS_CLK_REQ (All on-module)
+ */
+ pmc {
+ nvidia,pins = "pmc";
+ nvidia,function = "pwr_on";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- hdint {
- nvidia,pins = "hdint";
+
+ /*
+ * Colibri Address/Data Bus (GMI)
+ * Note: spid and spie optionally used for SPI1
+ */
+ gmi {
+ nvidia,pins = "atc", "atd", "ate", "dap1",
+ "dap2", "dap4", "gmd", "gpu",
+ "irrx", "irtx", "spia", "spib",
+ "spic", "spid", "spie", "uca",
+ "ucb";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ /* Further pins may be used as GPIOs */
+ gmi-gpio1 {
+ nvidia,pins = "lpw0", "lsc1", "lsck", "lsda";
nvidia,function = "hdmi";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2c1 {
- nvidia,pins = "rm";
- nvidia,function = "i2c1";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ gmi-gpio2 {
+ nvidia,pins = "lcsn", "ldc", "lm0", "lsdi";
+ nvidia,function = "rsvd4";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2c3 {
- nvidia,pins = "dtf";
- nvidia,function = "i2c3";
+
+ /* Colibri BL_ON */
+ bl-on {
+ nvidia,pins = "dta";
+ nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2cddc {
+
+ /* Colibri Backlight PWM<A>, PWM<B> */
+ pwm-a-b {
+ nvidia,pins = "sdc";
+ nvidia,function = "pwm";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri DDC */
+ ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- i2cp {
- nvidia,pins = "i2cp";
- nvidia,function = "i2cp";
+
+ /*
+ * Colibri EXT_IO*
+ * Note: dtf optionally used for I2C3
+ */
+ ext-io {
+ nvidia,pins = "dtf", "spdi";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- irda {
- nvidia,pins = "uad";
- nvidia,function = "irda";
+
+ /*
+ * Colibri Ethernet (On-module)
+ * ULPI EHCI instance 1 USB2_DP/N -> AX88772B
+ */
+ ulpi {
+ nvidia,pins = "uaa", "uab", "uda";
+ nvidia,function = "ulpi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- nand {
- nvidia,pins = "kbca", "kbcc", "kbcd",
- "kbce", "kbcf";
- nvidia,function = "nand";
+ ulpi-refclk {
+ nvidia,pins = "cdev2";
+ nvidia,function = "pllp_out4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- owc {
- nvidia,pins = "owc";
- nvidia,function = "owr";
+
+ /* Colibri HOTPLUG_DETECT (HDMI) */
+ hotplug-detect {
+ nvidia,pins = "hdint";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri I2C */
+ i2c {
+ nvidia,pins = "rm";
+ nvidia,function = "i2c1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- pmc {
- nvidia,pins = "pmc";
- nvidia,function = "pwr_on";
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
+
+ /*
+ * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
+ * today's display need DE, disable LCD_M1
+ */
+ lm1 {
+ nvidia,pins = "lm1";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- pwm {
- nvidia,pins = "sdb", "sdc", "sdd";
- nvidia,function = "pwm";
+
+ /* Colibri LCD (L_* resp. LDD<*>) */
+ lcd {
+ nvidia,pins = "ld0", "ld1", "ld2", "ld3",
+ "ld4", "ld5", "ld6", "ld7",
+ "ld8", "ld9", "ld10", "ld11",
+ "ld12", "ld13", "ld14", "ld15",
+ "ld16", "ld17", "lhs", "lsc0",
+ "lspi", "lvs";
+ nvidia,function = "displaya";
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- sdio4 {
- nvidia,pins = "atb", "gma", "gme";
+ /* Colibri LCD (Optional 24 BPP Support) */
+ lcd-24 {
+ nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2",
+ "lpp", "lvp1";
+ nvidia,function = "displaya";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri MMC */
+ mmc {
+ nvidia,pins = "atb", "gma";
nvidia,function = "sdio4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- spi1 {
- nvidia,pins = "spid", "spie", "spif";
- nvidia,function = "spi1";
+
+ /* Colibri MMCCD */
+ mmccd {
+ nvidia,pins = "gmb";
+ nvidia,function = "gmi_int";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- spi4 {
+
+ /* Colibri MMC (Optional 8-bit) */
+ mmc-8bit {
+ nvidia,pins = "gme";
+ nvidia,function = "sdio4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * Colibri Parallel Camera (Optional)
+ * pins multiplexed with others and therefore disabled
+ * Note: dta used for BL_ON by default
+ */
+ cif-mclk {
+ nvidia,pins = "csus";
+ nvidia,function = "vi_sensor_clk";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ cif {
+ nvidia,pins = "dtb", "dtc", "dtd";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri PWM<C>, PWM<D> */
+ pwm-c-d {
+ nvidia,pins = "sdb", "sdd";
+ nvidia,function = "pwm";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri SSP */
+ ssp {
nvidia,pins = "slxa", "slxc", "slxd", "slxk";
nvidia,function = "spi4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- uarta {
+
+ /* Colibri UART-A */
+ uart-a {
nvidia,pins = "sdio1";
nvidia,function = "uarta";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- uartd {
+ uart-a-dsr {
+ nvidia,pins = "lpw1";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+ uart-a-dcd {
+ nvidia,pins = "lpw2";
+ nvidia,function = "hdmi";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri UART-B */
+ uart-b {
nvidia,pins = "gmc";
nvidia,function = "uartd";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- ulpi {
- nvidia,pins = "uaa", "uab", "uda";
- nvidia,function = "ulpi";
+
+ /* Colibri UART-C */
+ uart-c {
+ nvidia,pins = "uad";
+ nvidia,function = "irda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USB_CDET */
+ usb-cdet {
+ nvidia,pins = "spdo";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_OC */
+ usbh-oc {
+ nvidia,pins = "spih";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_PEN */
+ usbh-pen {
+ nvidia,pins = "spig";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri VGA not supported */
+ vga {
+ nvidia,pins = "crtp";
+ nvidia,function = "crt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* I2C3 (Optional) */
+ i2c3 {
+ nvidia,pins = "dtf";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* JTAG_RTCK */
+ jtag-rtck {
+ nvidia,pins = "gpu7";
+ nvidia,function = "rtck";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME
+ * (All On-module)
+ */
+ gpio-gpv {
+ nvidia,pins = "gpv";
+ nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- ulpi_refclk {
- nvidia,pins = "cdev2";
- nvidia,function = "pllp_out4";
+
+ /*
+ * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN
+ * (All On-module); Colibri CAN_INT
+ */
+ gpio-dte {
+ nvidia,pins = "dte";
+ nvidia,function = "rsvd1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- usb_gpio {
- nvidia,pins = "spig", "spih";
- nvidia,function = "spi2_alt";
+
+ /* NAND (On-module) */
+ nand {
+ nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+ "kbce", "kbcf";
+ nvidia,function = "nand";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- vi {
- nvidia,pins = "dta", "dtb", "dtc", "dtd";
- nvidia,function = "vi";
+
+ /* Onewire (Optional) */
+ owr {
+ nvidia,pins = "owc";
+ nvidia,function = "owr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
- vi_sc {
- nvidia,pins = "csus";
- nvidia,function = "vi_sensor_clk";
+
+ /* Power I2C (On-module) */
+ i2cp {
+ nvidia,pins = "i2cp";
+ nvidia,function = "i2cp";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* RESET_OUT */
+ reset-out {
+ nvidia,pins = "ata";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * SPI1 (Optional)
+ * Note: spid and spie used for Colibri Address/Data
+ * Bus (GMI)
+ */
+ spi1 {
+ nvidia,pins = "spid", "spie", "spif";
+ nvidia,function = "spi1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
};
+
+ /*
+ * THERMD_ALERT# (On-module), unlatched I2C address pin
+ * of LM95245 temperature sensor therefore requires
+ * disabling for now
+ */
+ lvp0 {
+ nvidia,pins = "lvp0";
+ nvidia,function = "rsvd3";
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ };
};
};
- ac97: ac97@70002000 {
+ tegra_ac97: ac97@70002000 {
status = "okay";
- nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0)
- GPIO_ACTIVE_HIGH>;
- nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0)
- GPIO_ACTIVE_HIGH>;
+ nvidia,codec-reset-gpio =
+ <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+ nvidia,codec-sync-gpio =
+ <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra20-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra20-hsuart";
};
nand-controller@70008000 {
};
/* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */
- i2c_ddc: i2c@7000c400 {
+ hdmi_ddc: i2c@7000c400 {
clock-frequency = <10000>;
};
status = "okay";
clock-frequency = <100000>;
- pmic: tps6586x@34 {
+ pmic@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
ti,system-power-controller;
-
#gpio-cells = <2>;
gpio-controller;
-
- sys-supply = <&vdd_3v3_reg>;
- vin-sm0-supply = <&sys_reg>;
- vin-sm1-supply = <&sys_reg>;
- vin-sm2-supply = <&sys_reg>;
- vinldo01-supply = <&sm2_reg>;
- vinldo23-supply = <&vdd_3v3_reg>;
- vinldo4-supply = <&vdd_3v3_reg>;
- vinldo678-supply = <&vdd_3v3_reg>;
- vinldo9-supply = <&vdd_3v3_reg>;
+ sys-supply = <®_module_3v3>;
+ vin-sm0-supply = <®_3v3_vsys>;
+ vin-sm1-supply = <®_3v3_vsys>;
+ vin-sm2-supply = <®_3v3_vsys>;
+ vinldo01-supply = <®_1v8_vdd_ddr2>;
+ vinldo23-supply = <®_module_3v3>;
+ vinldo4-supply = <®_module_3v3>;
+ vinldo678-supply = <®_module_3v3>;
+ vinldo9-supply = <®_module_3v3>;
regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sys_reg: regulator@0 {
- reg = <0>;
- regulator-compatible = "sys";
- regulator-name = "vdd_sys";
+ reg_3v3_vsys: sys {
+ regulator-name = "VSYS_3.3V";
regulator-always-on;
};
- regulator@1 {
- reg = <1>;
- regulator-compatible = "sm0";
- regulator-name = "vdd_sm0,vdd_core";
+ sm0 {
+ regulator-name = "VDD_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- regulator@2 {
- reg = <2>;
- regulator-compatible = "sm1";
- regulator-name = "vdd_sm1,vdd_cpu";
+ sm1 {
+ regulator-name = "VDD_CPU_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
- sm2_reg: regulator@3 {
- reg = <3>;
- regulator-compatible = "sm2";
- regulator-name = "vdd_sm2,vin_ldo*";
+ reg_1v8_vdd_ddr2: sm2 {
+ regulator-name = "VDD_DDR2_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
/* LDO0 is not connected to anything */
- regulator@5 {
- reg = <5>;
- regulator-compatible = "ldo1";
- regulator-name = "vdd_ldo1,avdd_pll*";
+ /*
+ * +3.3V_ENABLE_N switching via FET:
+ * AVDD_AUDIO_S and +3.3V
+ * see also +3.3V fixed supply
+ */
+ ldo1 {
+ regulator-name = "AVDD_PLL_1.1V";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
- regulator@6 {
- reg = <6>;
- regulator-compatible = "ldo2";
- regulator-name = "vdd_ldo2,vdd_rtc";
+ ldo2 {
+ regulator-name = "VDD_RTC_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
/* LDO3 is not connected to anything */
- regulator@8 {
- reg = <8>;
- regulator-compatible = "ldo4";
- regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ ldo4 {
+ regulator-name = "VDDIO_SYS_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
- ldo5_reg: regulator@9 {
- reg = <9>;
- regulator-compatible = "ldo5";
- regulator-name = "vdd_ldo5,vdd_fuse";
+ /* Switched via FET from regular +3.3V */
+ ldo5 {
+ regulator-name = "+3.3V_USB";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- regulator@10 {
- reg = <10>;
- regulator-compatible = "ldo6";
- regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+ ldo6 {
+ regulator-name = "AVDD_VDAC_2.85V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
- hdmi_vdd_reg: regulator@11 {
- reg = <11>;
- regulator-compatible = "ldo7";
- regulator-name = "vdd_ldo7,avdd_hdmi";
+ reg_3v3_avdd_hdmi: ldo7 {
+ regulator-name = "AVDD_HDMI_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
- hdmi_pll_reg: regulator@12 {
- reg = <12>;
- regulator-compatible = "ldo8";
- regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ reg_1v8_avdd_hdmi_pll: ldo8 {
+ regulator-name = "AVDD_HDMI_PLL_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
- regulator@13 {
- reg = <13>;
- regulator-compatible = "ldo9";
- regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ ldo9 {
+ regulator-name = "VDDIO_RX_DDR_2.85V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
- regulator@14 {
- reg = <14>;
- regulator-compatible = "ldo_rtc";
- regulator-name = "vdd_rtc_out,vdd_cell";
+ ldo_rtc {
+ regulator-name = "VCC_BATT";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
- temperature-sensor@4c {
+ /* LM95245 temperature sensor */
+ temp-sensor@4c {
compatible = "national,lm95245";
reg = <0x4c>;
};
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <3875>;
nvidia,sys-clock-req-active-high;
+
+ /* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <3>;
+ nvidia,bus-addr = <0x34>;
+ nvidia,reg-addr = <0x14>;
+ nvidia,reg-data = <0x8>;
+ };
};
memory-controller@7000f400 {
};
};
+ /* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */
usb@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
- GPIO_ACTIVE_LOW>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ asix@1 {
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
usb-phy@c5004000 {
status = "okay";
- nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
- GPIO_ACTIVE_LOW>;
+ nvidia,phy-reset-gpio =
+ <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ vbus-supply = <®_lan_v_bus>;
};
- sdhci@c8000600 {
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ clk32k_in: xtal3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ reg_lan_v_bus: regulator-lan-v-bus {
+ compatible = "regulator-fixed";
+ regulator-name = "LAN_V_BUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd_3v3_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "vdd_3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "internal_usb";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- regulator-boot-on;
- regulator-always-on;
- gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
compatible = "nvidia,tegra-audio-wm9712-colibri_t20",
- "nvidia,tegra-audio-wm9712";
- nvidia,model = "Colibri T20 AC97 Audio";
-
+ "nvidia,tegra-audio-wm9712";
+ nvidia,model = "Toradex Colibri T20";
nvidia,audio-routing =
"Headphone", "HPOUTL",
"Headphone", "HPOUTR",
"LineIn", "LINEINL",
"LineIn", "LINEINR",
"Mic", "MIC1";
-
- nvidia,ac97-controller = <&ac97>;
-
+ nvidia,ac97-controller = <&tegra_ac97>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
+
+&gpio {
+ lan-reset-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LAN_RESET#";
+ };
+
+ /* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */
+ npwe {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "Tri-state nPWE";
+ };
+
+ /* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */
+ rdnwr {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "Not tri-state RDnWR";
+ };
+};
request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
slave-addr = <138>;
clocks = <&tegra_car TEGRA20_CLK_I2C3>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
+ <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;
clock-names = "div-clk", "fast-clk";
resets = <&tegra_car 67>;
reset-names = "i2c";
gpio-keys {
compatible = "gpio-keys";
- power {
- label = "Power";
+ wakeup {
+ label = "Wakeup";
gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
+ linux,code = <KEY_WAKEUP>;
wakeup-source;
};
};
GPIO_ACTIVE_HIGH>;
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
- <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
- <&tegra_car TEGRA20_CLK_CDEV1>;
+ <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA20_CLK_CDEV1>;
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
status = "disabled";
};
- gmi@70009000 {
- compatible = "nvidia,tegra20-gmi";
- reg = <0x70009000 0x1000>;
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0xd0000000 0xfffffff>;
- clocks = <&tegra_car TEGRA20_CLK_NOR>;
- clock-names = "gmi";
- resets = <&tegra_car 42>;
- reset-names = "gmi";
- status = "disabled";
- };
-
nand-controller@70008000 {
compatible = "nvidia,tegra20-nand";
reg = <0x70008000 0x100>;
status = "disabled";
};
+ gmi@70009000 {
+ compatible = "nvidia,tegra20-gmi";
+ reg = <0x70009000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0xd0000000 0xfffffff>;
+ clocks = <&tegra_car TEGRA20_CLK_NOR>;
+ clock-names = "gmi";
+ resets = <&tegra_car 42>;
+ reset-names = "gmi";
+ status = "disabled";
+ };
+
pwm: pwm@7000a000 {
compatible = "nvidia,tegra20-pwm";
reg = <0x7000a000 0x100>;
compatible = "arm,cortex-a9-pmu";
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&{/cpus/cpu@0}>,
+ <&{/cpus/cpu@1}>;
};
};
/ {
model = "Toradex Apalis T30 on Apalis Evaluation Board";
- compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30";
+ compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30",
+ "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
- rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc1 = "/i2c@7000d000/pmic@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
};
pcie@3000 {
- status = "okay";
-
pci@1,0 {
status = "okay";
};
pci@2,0 {
status = "okay";
};
-
- pci@3,0 {
- status = "okay";
- };
};
host1x@50000000 {
nvidia,panel = <&panel>;
};
};
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
+ /* Apalis UART1 */
serial@70006000 {
status = "okay";
};
+ /* Apalis UART2 */
serial@70006040 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Apalis UART3 */
serial@70006200 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Apalis UART4 */
serial@70006300 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
* CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
* carrier board)
*/
- cami2c: i2c@7000c500 {
+ i2c@7000c500 {
status = "okay";
clock-frequency = <400000>;
};
/* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
- hdmiddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
- spidev0: spidev@1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <25000000>;
- };
};
/* SPI5: Apalis SPI2 */
spi@7000dc00 {
status = "okay";
spi-max-frequency = <25000000>;
- spidev1: spidev@2 {
- compatible = "spidev";
- reg = <2>;
- spi-max-frequency = <25000000>;
- };
- };
-
- hda@70030000 {
- status = "okay";
};
- sd1: sdhci@78000000 {
+ /* Apalis SD1 */
+ sdhci@78000000 {
status = "okay";
bus-width = <4>;
/* SD1_CD# */
no-1-8-v;
};
- mmc1: sdhci@78000400 {
+ /* Apalis MMC1 */
+ sdhci@78000400 {
status = "okay";
bus-width = <8>;
/* MMC1_CD# */
/* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
usb@7d000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@7d000000 {
status = "okay";
- dr_mode = "otg";
- vbus-supply = <&usbo1_vbus_reg>;
+ vbus-supply = <®_usbo1_vbus>;
};
/* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
usb-phy@7d004000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <®_usbh_vbus>;
};
/* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
usb-phy@7d008000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <®_usbh_vbus>;
};
backlight: backlight {
compatible = "pwm-backlight";
-
- /* PWM_BKL1 */
- pwms = <&pwm 0 5000000>;
brightness-levels = <255 231 223 207 191 159 127 0>;
default-brightness-level = <6>;
/* BKL1_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* BKL1_PWM */
};
gpio-keys {
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
-
backlight = <&backlight>;
+ power-supply = <®_3v3>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- pwm1 {
- label = "PWM1";
- pwms = <&pwm 3 19600>;
- max-brightness = <255>;
- };
-
- pwm2 {
- label = "PWM2";
- pwms = <&pwm 2 19600>;
- max-brightness = <255>;
- };
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
- pwm3 {
- label = "PWM3";
- pwms = <&pwm 1 19600>;
- max-brightness = <255>;
- };
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
};
- regulators {
- sys_5v0_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ /* USBO1_EN */
+ reg_usbo1_vbus: regulator-usbo1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBO1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_5v0>;
+ };
- /* USBO1_EN */
- usbo1_vbus_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usbo1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&sys_5v0_reg>;
- };
+ /* USBH_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_5v0>;
+ };
+};
- /* USBH_EN */
- usbh_vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usbh_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
- enable-active-high;
- vin-supply = <&sys_5v0_reg>;
- };
+&gpio {
+ /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+ pex-perst-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PEX_PERST_N";
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "tegra30-apalis-v1.1.dtsi"
+
+/ {
+ model = "Toradex Apalis T30 on Apalis Evaluation Board";
+ compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval",
+ "toradex,apalis_t30-v1.1", "toradex,apalis_t30",
+ "nvidia,tegra30";
+
+ aliases {
+ rtc0 = "/i2c@7000c000/rtc@68";
+ rtc1 = "/i2c@7000d000/pmic@2d";
+ rtc2 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ pcie@3000 {
+ pci@1,0 {
+ status = "okay";
+ };
+
+ pci@2,0 {
+ status = "okay";
+ };
+ };
+
+ host1x@50000000 {
+ dc@54200000 {
+ rgb {
+ status = "okay";
+ nvidia,panel = <&panel>;
+ };
+ };
+
+ hdmi@54280000 {
+ status = "okay";
+ hdmi-supply = <®_5v0>;
+ };
+ };
+
+ /* Apalis UART1 */
+ serial@70006000 {
+ status = "okay";
+ };
+
+ /* Apalis UART2 */
+ serial@70006040 {
+ status = "okay";
+ };
+
+ /* Apalis UART3 */
+ serial@70006200 {
+ status = "okay";
+ };
+
+ /* Apalis UART4 */
+ serial@70006300 {
+ status = "okay";
+ };
+
+ pwm@7000a000 {
+ status = "okay";
+ };
+
+ /*
+ * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier
+ * board)
+ */
+ i2c@7000c000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pcie-switch@58 {
+ compatible = "plx,pex8605";
+ reg = <0x58>;
+ };
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc@68 {
+ compatible = "st,m41t0";
+ reg = <0x68>;
+ };
+ };
+
+ /* GEN2_I2C: unused */
+
+ /*
+ * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on
+ * carrier board)
+ */
+ i2c@7000c500 {
+ status = "okay";
+ clock-frequency = <400000>;
+ };
+
+ /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */
+ i2c@7000c700 {
+ status = "okay";
+ };
+
+ /* SPI1: Apalis SPI1 */
+ spi@7000d400 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ };
+
+ /* SPI5: Apalis SPI2 */
+ spi@7000dc00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+ };
+
+ /* Apalis SD1 */
+ sdhci@78000000 {
+ status = "okay";
+ bus-width = <4>;
+ /* SD1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ };
+
+ /* Apalis MMC1 */
+ sdhci@78000400 {
+ status = "okay";
+ bus-width = <8>;
+ /* MMC1_CD# */
+ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+ vqmmc-supply = <®_vddio_sdmmc3>;
+ };
+
+ /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */
+ usb@7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ usb-phy@7d000000 {
+ status = "okay";
+ vbus-supply = <®_usbo1_vbus>;
+ };
+
+ /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */
+ usb@7d004000 {
+ status = "okay";
+ };
+
+ usb-phy@7d004000 {
+ status = "okay";
+ vbus-supply = <®_usbh_vbus>;
+ };
+
+ /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <®_usbh_vbus>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ brightness-levels = <255 231 223 207 191 159 127 0>;
+ default-brightness-level = <6>;
+ /* BKL1_ON */
+ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* BKL1_PWM */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wakeup {
+ label = "WAKE1_MICO";
+ gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WAKEUP>;
+ debounce-interval = <10>;
+ wakeup-source;
+ };
+ };
+
+ panel: panel {
+ /*
+ * edt,et057090dhu: EDT 5.7" LCD TFT
+ * edt,et070080dh6: EDT 7.0" LCD TFT
+ */
+ compatible = "edt,et057090dhu", "simple-panel";
+ backlight = <&backlight>;
+ power-supply = <®_3v3>;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /* USBO1_EN */
+ reg_usbo1_vbus: regulator-usbo1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBO1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_5v0>;
+ };
+
+ /* USBH_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USBH(2A|2C|2D|3|4)";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ vin-supply = <®_5v0>;
+ };
+
+ /*
+ * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on
+ * EN_+3.3_SDMMC3 GPIO
+ */
+ reg_vddio_sdmmc3: regulator-vddio-sdmmc3 {
+ compatible = "regulator-gpio";
+ regulator-name = "VDDIO_SDMMC3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-type = "voltage";
+ gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x0
+ 3300000 0x1>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vddio_sdmmc_1v8_reg>;
+ };
+};
+
+&gpio {
+ /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */
+ pex-perst-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PEX_PERST_N";
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+#include "tegra30.dtsi"
+
+/*
+ * Toradex Apalis T30 Module Device Tree
+ * Compatible for Revisions 1GB: V1.1A, V1.1B; 1GB IT: V1.1A, V1.1B;
+ * 2GB: V1.1A, V1.1B
+ */
+/ {
+ memory@80000000 {
+ reg = <0x80000000 0x40000000>;
+ };
+
+ pcie@3000 {
+ status = "okay";
+ avdd-pexa-supply = <&vdd2_reg>;
+ avdd-pexb-supply = <&vdd2_reg>;
+ avdd-pex-pll-supply = <&vdd2_reg>;
+ avdd-plle-supply = <&ldo6_reg>;
+ hvdd-pex-supply = <®_module_3v3>;
+ vddio-pex-ctl-supply = <®_module_3v3>;
+ vdd-pexa-supply = <&vdd2_reg>;
+ vdd-pexb-supply = <&vdd2_reg>;
+
+ /* Apalis type specific */
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ };
+
+ /* Apalis PCIe */
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ };
+
+ /* I210/I211 Gigabit Ethernet Controller (on-module) */
+ pci@3,0 {
+ status = "okay";
+ nvidia,num-lanes = <1>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+ };
+
+ host1x@50000000 {
+ hdmi@54280000 {
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
+ };
+ };
+
+ pinmux@70000868 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&state_default>;
+
+ state_default: pinmux {
+ /* Analogue Audio (On-module) */
+ clk1-out-pw4 {
+ nvidia,pins = "clk1_out_pw4";
+ nvidia,function = "extperiph1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
+ nvidia,function = "i2s2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_ON */
+ pv2 {
+ nvidia,pins = "pv2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis BKL1_PWM */
+ uart3-rts-n-pc0 {
+ nvidia,pins = "uart3_rts_n_pc0";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
+ uart3-cts-n-pa1 {
+ nvidia,pins = "uart3_cts_n_pa1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis CAN1 on SPI6 */
+ spi2-cs0-n-px3 {
+ nvidia,pins = "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2";
+ nvidia,function = "spi6";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* CAN_INT1 */
+ spi2-cs1-n-pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis CAN2 on SPI4 */
+ gmi-a16-pj7 {
+ nvidia,pins = "gmi_a16_pj7",
+ "gmi_a17_pb0",
+ "gmi_a18_pb1",
+ "gmi_a19_pk7";
+ nvidia,function = "spi4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* CAN_INT2 */
+ spi2-cs2-n-pw3 {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Digital Audio */
+ clk1-req-pee2 {
+ nvidia,pins = "clk1_req_pee2";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ clk2-out-pw5 {
+ nvidia,pins = "clk2_out_pw5";
+ nvidia,function = "extperiph2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap1-fs-pn0 {
+ nvidia,pins = "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis GPIO */
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_row10_ps2",
+ "kb_row11_ps3",
+ "kb_row12_ps4",
+ "kb_row13_ps5",
+ "kb_row14_ps6",
+ "kb_row15_ps7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis HDMI1 */
+ hdmi-cec-pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C1 */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C2 (DDC) */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 (CAM) */
+ cam-i2c-scl-pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "i2c3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis LCD1 */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis MMC1 */
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc3-dat0-pb7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6",
+ "sdmmc3_dat2_pb5",
+ "sdmmc3_dat3_pb4",
+ "sdmmc3_dat4_pd1",
+ "sdmmc3_dat5_pd0",
+ "sdmmc3_dat6_pd3",
+ "sdmmc3_dat7_pd4";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis MMC1_CD# */
+ pv3 {
+ nvidia,pins = "pv3";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Parallel Camera */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ kb-col2-pq2 {
+ nvidia,pins = "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row5-pr5 {
+ nvidia,pins = "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /*
+ * VI level-shifter direction
+ * (pull-down => default direction input)
+ */
+ vi-mclk-pt1 {
+ nvidia,pins = "vi_mclk_pt1";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM1 */
+ pu6 {
+ nvidia,pins = "pu6";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM2 */
+ pu5 {
+ nvidia,pins = "pu5";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM3 */
+ pu4 {
+ nvidia,pins = "pu4";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis PWM4 */
+ pu3 {
+ nvidia,pins = "pu3";
+ nvidia,function = "pwm0";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis RESET_MOCI# */
+ gmi-rst-n-pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SATA1_ACT# */
+ pex-l0-prsnt-n-pdd0 {
+ nvidia,pins = "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SD1 */
+ sdmmc1-clk-pz0 {
+ nvidia,pins = "sdmmc1_clk_pz0";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ sdmmc1-cmd-pz1 {
+ nvidia,pins = "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat2_py5",
+ "sdmmc1_dat3_py4";
+ nvidia,function = "sdmmc1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+ /* Apalis SD1_CD# */
+ clk2-req-pcc5 {
+ nvidia,pins = "clk2_req_pcc5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPDIF1 */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5",
+ "spdif_in_pk6";
+ nvidia,function = "spdif";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPI1 */
+ spi1-sck-px5 {
+ nvidia,pins = "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_miso_px7",
+ "spi1_cs0_n_px6";
+ nvidia,function = "spi1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis SPI2 */
+ lcd-sck-pz4 {
+ nvidia,pins = "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_sdin_pz2",
+ "lcd_cs0_n_pn4";
+ nvidia,function = "spi5";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * Apalis TS (Low-speed type specific)
+ * pins may be used as GPIOs
+ */
+ kb-col5-pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-col6-pq6 {
+ nvidia,pins = "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row8_ps0",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis UART1 */
+ ulpi-data0 {
+ nvidia,pins = "ulpi_data0_po1",
+ "ulpi_data1_po2",
+ "ulpi_data2_po3",
+ "ulpi_data3_po4",
+ "ulpi_data4_po5",
+ "ulpi_data5_po6",
+ "ulpi_data6_po7",
+ "ulpi_data7_po0";
+ nvidia,function = "uarta";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART2 */
+ ulpi-clk-py0 {
+ nvidia,pins = "ulpi_clk_py0",
+ "ulpi_dir_py1",
+ "ulpi_nxt_py2",
+ "ulpi_stp_py3";
+ nvidia,function = "uartd";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART3 */
+ uart2-rxd-pc3 {
+ nvidia,pins = "uart2_rxd_pc3",
+ "uart2_txd_pc2";
+ nvidia,function = "uartb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis UART4 */
+ uart3-rxd-pw7 {
+ nvidia,pins = "uart3_rxd_pw7",
+ "uart3_txd_pw6";
+ nvidia,function = "uartc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_EN */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_OC# */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis USBO1_EN */
+ gen2-i2c-scl-pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBO1_OC# */
+ gen2-i2c-sda-pt6 {
+ nvidia,pins = "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis VGA1 not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis WAKE1_MICO */
+ pv1 {
+ nvidia,pins = "pv1";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4-clk-pcc4 {
+ nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
+ "sdmmc4_rst_n_pcc3";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ sdmmc4-dat0-paa0 {
+ nvidia,pins = "sdmmc4_dat0_paa0",
+ "sdmmc4_dat1_paa1",
+ "sdmmc4_dat2_paa2",
+ "sdmmc4_dat3_paa3",
+ "sdmmc4_dat4_paa4",
+ "sdmmc4_dat5_paa5",
+ "sdmmc4_dat6_paa6",
+ "sdmmc4_dat7_paa7";
+ nvidia,function = "sdmmc4";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* EN_+3.3_SDMMC3 */
+ uart2-cts-n-pj5 {
+ nvidia,pins = "uart2_cts_n_pj5";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+ pex-l2-prsnt-n-pdd7 {
+ nvidia,pins = "pex_l2_prsnt_n_pdd7",
+ "pex_l2_rst_n_pcc6";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+ pex-wake-n-pdd3 {
+ nvidia,pins = "pex_wake_n_pdd3",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN i210/i211 SMB_ALERT_N (On-module) */
+ sys-clk-req-pz5 {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LVDS Transceiver Configuration */
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pbb7",
+ "pcc1",
+ "pcc2";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3",
+ "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk-32k-out-pa0 {
+ nvidia,pins = "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap2-fs-pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "lcd_dc0_pn6",
+ "lcd_m1_pw1",
+ "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_prsnt_n_pdd4",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_dqs_pi2",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "lcd_cs1_n_pw0",
+ "pu0",
+ "pu1",
+ "pu2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs0-n-pj0 {
+ nvidia,pins = "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs6-n-pi3 {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "sata";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs7-n-pi6 {
+ nvidia,pins = "gmi_cs7_n_pi6";
+ nvidia,function = "gmi_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_pwr2_pc6",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2-rts-n-pj6 {
+ nvidia,pins = "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Power I2C (On-module) */
+ pwr-i2c-scl-pz6 {
+ nvidia,pins = "pwr_i2c_scl_pz6",
+ "pwr_i2c_sda_pz7";
+ nvidia,function = "i2cpwr";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /*
+ * THERMD_ALERT#, unlatched I2C address pin of LM95245
+ * temperature sensor therefore requires disabling for
+ * now
+ */
+ lcd-dc1-pd2 {
+ nvidia,pins = "lcd_dc1_pd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* TOUCH_PEN_INT# (On-module) */
+ pv0 {
+ nvidia,pins = "pv0";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ };
+ };
+
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
+ clock-frequency = <10000>;
+ };
+
+ /*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+ i2c@7000d000 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ /* SGTL5000 audio codec */
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vio>;
+ VDDIO-supply = <®_module_3v3>;
+ clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
+ };
+
+ pmic: pmic@2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ vcc1-supply = <®_module_3v3>;
+ vcc2-supply = <®_module_3v3>;
+ vcc3-supply = <®_1v8_vio>;
+ vcc4-supply = <®_module_3v3>;
+ vcc5-supply = <®_module_3v3>;
+ vcc6-supply = <®_1v8_vio>;
+ vcc7-supply = <®_5v0_charge_pump>;
+ vccio-supply = <®_module_3v3>;
+
+ regulators {
+ vdd1_reg: vdd1 {
+ regulator-name = "+V1.35_VDDIO_DDR";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ vdd2_reg: vdd2 {
+ regulator-name = "+V1.05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ vddctrl_reg: vddctrl {
+ regulator-name = "+V1.0_VDD_CPU";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
+ * is off
+ */
+ vddio_sdmmc_1v8_reg: ldo1 {
+ regulator-name = "+VDDIO_SDMMC3_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * EN_+V3.3 switching via FET:
+ * +V3.3_AUDIO_AVDD_S, +V3.3
+ * see also +V3.3 fixed supply
+ */
+ ldo2_reg: ldo2 {
+ regulator-name = "EN_+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-name = "+V1.2_CSI";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-name = "+V1.2_VDD_RTC";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V2.8_AVDD_VDAC:
+ * only required for (unsupported) analog RGB
+ */
+ ldo5_reg: ldo5 {
+ regulator-name = "+V2.8_AVDD_VDAC";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ /*
+ * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
+ * but LDO6 can't set voltage in 50mV
+ * granularity
+ */
+ ldo6_reg: ldo6 {
+ regulator-name = "+V1.05_AVDD_PLLE";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-name = "+V1.2_AVDD_PLL";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-name = "+V1.0_VDD_DDR_HS";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ };
+ };
+
+ /* STMPE811 touch screen controller */
+ touchscreen@41 {
+ compatible = "st,stmpe811";
+ reg = <0x41>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ /* 3.25 MHz ADC clock speed */
+ st,adc-freq = <1>;
+ /* 8 sample average control */
+ st,ave-ctrl = <3>;
+ /* 7 length fractional part in z */
+ st,fraction-z = <7>;
+ /*
+ * 50 mA typical 80 mA max touchscreen drivers
+ * current limit value
+ */
+ st,i-drive = <1>;
+ /* 12-bit ADC */
+ st,mod-12b = <1>;
+ /* internal ADC reference */
+ st,ref-sel = <0>;
+ /* ADC converstion time: 80 clocks */
+ st,sample-time = <4>;
+ /* 1 ms panel driver settling time */
+ st,settling = <3>;
+ /* 5 ms touch detect interrupt delay */
+ st,touch-det-delay = <5>;
+ };
+ };
+
+ /*
+ * LM95245 temperature sensor
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
+ */
+ temp-sensor@4c {
+ compatible = "national,lm95245";
+ reg = <0x4c>;
+ };
+
+ /* SW: +V1.2_VDD_CORE */
+ regulator@60 {
+ compatible = "ti,tps62362";
+ reg = <0x60>;
+
+ regulator-name = "tps62362-vout";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-low;
+ /* VSEL1: EN_CORE_DVFS_N low for DVFS */
+ ti,vsel1-state-low;
+ };
+ };
+
+ /* SPI4: CAN2 */
+ spi@7000da00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@1 {
+ compatible = "microchip,mcp2515";
+ reg = <1>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ /* SPI6: CAN1 */
+ spi@7000de00 {
+ status = "okay";
+ spi-max-frequency = <10000000>;
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ clocks = <&clk16m>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
+ spi-max-frequency = <10000000>;
+ };
+ };
+
+ pmc@7000e400 {
+ nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <5000>;
+ nvidia,cpu-pwr-off-time = <5000>;
+ nvidia,core-pwr-good-time = <3845 3845>;
+ nvidia,core-pwr-off-time = <0>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
+ };
+
+ ahub@70080000 {
+ i2s@70080500 {
+ status = "okay";
+ };
+ };
+
+ /* eMMC */
+ sdhci@78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
+ };
+
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ clk16m: osc4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
+
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_1v8_vio>;
+ };
+
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
+
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "toradex,tegra-audio-sgtl5000-apalis_t30",
+ "nvidia,tegra-audio-sgtl5000";
+ nvidia,model = "Toradex Apalis T30";
+ nvidia,audio-routing =
+ "Headphone Jack", "HP_OUT",
+ "LINE_IN", "Line In Jack",
+ "MIC_IN", "Mic Jack";
+ nvidia,i2s-controller = <&tegra_i2s2>;
+ nvidia,audio-codec = <&sgtl5000>;
+ clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+ <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+ <&tegra_car TEGRA30_CLK_EXTERN1>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
+ };
+};
/*
* Toradex Apalis T30 Module Device Tree
- * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A;
- * 2GB: V1.0B, V1.0C, V1.0E, V1.1A
+ * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C, V1.0E
*/
/ {
- model = "Toradex Apalis T30";
- compatible = "toradex,apalis_t30", "nvidia,tegra30";
-
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
pcie@3000 {
+ status = "okay";
avdd-pexa-supply = <&vdd2_reg>;
- vdd-pexa-supply = <&vdd2_reg>;
avdd-pexb-supply = <&vdd2_reg>;
- vdd-pexb-supply = <&vdd2_reg>;
avdd-pex-pll-supply = <&vdd2_reg>;
avdd-plle-supply = <&ldo6_reg>;
- vddio-pex-ctl-supply = <&sys_3v3_reg>;
- hvdd-pex-supply = <&sys_3v3_reg>;
+ hvdd-pex-supply = <®_module_3v3>;
+ vddio-pex-ctl-supply = <®_module_3v3>;
+ vdd-pexa-supply = <&vdd2_reg>;
+ vdd-pexb-supply = <&vdd2_reg>;
+ /* Apalis type specific */
pci@1,0 {
nvidia,num-lanes = <4>;
};
+ /* Apalis PCIe */
pci@2,0 {
nvidia,num-lanes = <1>;
};
+ /* I210/I211 Gigabit Ethernet Controller (on-module) */
pci@3,0 {
+ status = "okay";
nvidia,num-lanes = <1>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
};
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&avdd_hdmi_3v3_reg>;
- pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmiddc>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
state_default: pinmux {
/* Analogue Audio (On-module) */
- clk1_out_pw4 {
+ clk1-out-pw4 {
nvidia,pins = "clk1_out_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_fs_pp0 {
- nvidia,pins = "dap3_fs_pp0",
- "dap3_sclk_pp3",
- "dap3_din_pp1",
- "dap3_dout_pp2";
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,function = "rsvd4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Apalis BKL1_PWM */
- uart3_rts_n_pc0 {
+ uart3-rts-n-pc0 {
nvidia,pins = "uart3_rts_n_pc0";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */
- uart3_cts_n_pa1 {
+ uart3-cts-n-pa1 {
nvidia,pins = "uart3_cts_n_pa1";
nvidia,function = "rsvd2";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Apalis CAN1 on SPI6 */
- spi2_cs0_n_px3 {
+ spi2-cs0-n-px3 {
nvidia,pins = "spi2_cs0_n_px3",
"spi2_miso_px1",
"spi2_mosi_px0",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* CAN_INT1 */
- spi2_cs1_n_pw2 {
+ spi2-cs1-n-pw2 {
nvidia,pins = "spi2_cs1_n_pw2";
nvidia,function = "spi3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis CAN2 on SPI4 */
- gmi_a16_pj7 {
+ gmi-a16-pj7 {
nvidia,pins = "gmi_a16_pj7",
"gmi_a17_pb0",
"gmi_a18_pb1",
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* CAN_INT2 */
- spi2_cs2_n_pw3 {
+ spi2-cs2-n-pw3 {
nvidia,pins = "spi2_cs2_n_pw3";
nvidia,function = "spi3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Apalis Digital Audio */
- clk1_req_pee2 {
+ clk1-req-pee2 {
nvidia,pins = "clk1_req_pee2";
nvidia,function = "hda";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- clk2_out_pw5 {
+ clk2-out-pw5 {
nvidia,pins = "clk2_out_pw5";
nvidia,function = "extperiph2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap1_fs_pn0 {
+ dap1-fs-pn0 {
nvidia,pins = "dap1_fs_pn0",
"dap1_din_pn1",
"dap1_dout_pn2",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Apalis I2C3 */
- cam_i2c_scl_pbb1 {
+ /* Apalis GPIO */
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_row10_ps2",
+ "kb_row11_ps3",
+ "kb_row12_ps4",
+ "kb_row13_ps5",
+ "kb_row14_ps6",
+ "kb_row15_ps7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis HDMI1 */
+ hdmi-cec-pee3 {
+ nvidia,pins = "hdmi_cec_pee3";
+ nvidia,function = "cec";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C1 */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C2 (DDC) */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis I2C3 (CAM) */
+ cam-i2c-scl-pbb1 {
nvidia,pins = "cam_i2c_scl_pbb1",
"cam_i2c_sda_pbb2";
nvidia,function = "i2c3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
+ /* Apalis LCD1 */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis MMC1 */
- sdmmc3_clk_pa6 {
- nvidia,pins = "sdmmc3_clk_pa6",
- "sdmmc3_cmd_pa7";
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_dat0_pb7 {
- nvidia,pins = "sdmmc3_dat0_pb7",
+ sdmmc3-dat0-pb7 {
+ nvidia,pins = "sdmmc3_cmd_pa7",
+ "sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4",
pv3 {
nvidia,pins = "pv3";
nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis Parallel Camera */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Multiplexed and therefore disabled */
+ kb-col2-pq2 {
+ nvidia,pins = "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row5-pr5 {
+ nvidia,pins = "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /*
+ * VI level-shifter direction
+ * (pull-down => default direction input)
+ */
+ vi-mclk-pt1 {
+ nvidia,pins = "vi_mclk_pt1";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
/* Apalis PWM1 */
pu6 {
};
/* Apalis RESET_MOCI# */
- gmi_rst_n_pi4 {
+ gmi-rst-n-pi4 {
nvidia,pins = "gmi_rst_n_pi4";
nvidia,function = "gmi";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Apalis SATA1_ACT# */
+ pex-l0-prsnt-n-pdd0 {
+ nvidia,pins = "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Apalis SD1 */
- sdmmc1_clk_pz0 {
+ sdmmc1-clk-pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc1_cmd_pz1 {
+ sdmmc1-cmd-pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
/* Apalis SD1_CD# */
- clk2_req_pcc5 {
+ clk2-req-pcc5 {
nvidia,pins = "clk2_req_pcc5";
nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Apalis SPDIF1 */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5",
+ "spdif_in_pk6";
+ nvidia,function = "spdif";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* Apalis SPI1 */
- spi1_sck_px5 {
+ spi1-sck-px5 {
nvidia,pins = "spi1_sck_px5",
"spi1_mosi_px4",
"spi1_miso_px7",
};
/* Apalis SPI2 */
- lcd_sck_pz4 {
+ lcd-sck-pz4 {
nvidia,pins = "lcd_sck_pz4",
"lcd_sdout_pn5",
"lcd_sdin_pz2",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /*
+ * Apalis TS (Low-speed type specific)
+ * pins may be used as GPIOs
+ */
+ kb-col5-pq5 {
+ nvidia,pins = "kb_col5_pq5";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ kb-col6-pq6 {
+ nvidia,pins = "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row8_ps0",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis UART1 */
- ulpi_data0 {
+ ulpi-data0 {
nvidia,pins = "ulpi_data0_po1",
"ulpi_data1_po2",
"ulpi_data2_po3",
};
/* Apalis UART2 */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0",
"ulpi_dir_py1",
"ulpi_nxt_py2",
};
/* Apalis UART3 */
- uart2_rxd_pc3 {
+ uart2-rxd-pc3 {
nvidia,pins = "uart2_rxd_pc3",
"uart2_txd_pc2";
nvidia,function = "uartb";
};
/* Apalis UART4 */
- uart3_rxd_pw7 {
+ uart3-rxd-pw7 {
nvidia,pins = "uart3_rxd_pw7",
"uart3_txd_pw6";
nvidia,function = "uartc";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Apalis USBH_EN */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Apalis USBH_OC# */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
/* Apalis USBO1_EN */
- gen2_i2c_scl_pt5 {
+ gen2-i2c-scl-pt5 {
nvidia,pins = "gen2_i2c_scl_pt5";
nvidia,function = "rsvd4";
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
};
/* Apalis USBO1_OC# */
- gen2_i2c_sda_pt6 {
+ gen2-i2c-sda-pt6 {
nvidia,pins = "gen2_i2c_sda_pt6";
nvidia,function = "rsvd4";
nvidia,open-drain = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Apalis VGA1 not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Apalis WAKE1_MICO */
pv1 {
nvidia,pins = "pv1";
};
/* eMMC (On-module) */
- sdmmc4_clk_pcc4 {
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */
+ pex-l2-prsnt-n-pdd7 {
+ nvidia,pins = "pex_l2_prsnt_n_pdd7",
+ "pex_l2_rst_n_pcc6";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */
+ pex-wake-n-pdd3 {
+ nvidia,pins = "pex_wake_n_pdd3",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "pcie";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN i210/i211 SMB_ALERT_N (On-module) */
+ sys-clk-req-pz5 {
+ nvidia,pins = "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
/* LVDS Transceiver Configuration */
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
};
pbb3 {
nvidia,pins = "pbb3",
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk-32k-out-pa0 {
+ nvidia,pins = "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ dap2-fs-pa2 {
+ nvidia,pins = "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "lcd_dc0_pn6",
+ "lcd_m1_pw1",
+ "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_prsnt_n_pdd4",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_dqs_pi2",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "lcd_cs1_n_pw0",
+ "pu0",
+ "pu1",
+ "pu2";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs0-n-pj0 {
+ nvidia,pins = "gmi_cs0_n_pj0",
+ "gmi_cs1_n_pj2",
+ "gmi_cs3_n_pk4";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs6-n-pi3 {
+ nvidia,pins = "gmi_cs6_n_pi3";
+ nvidia,function = "sata";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-cs7-n-pi6 {
+ nvidia,pins = "gmi_cs7_n_pi6";
+ nvidia,function = "gmi_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_pwr2_pc6",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ uart2-cts-n-pj5 {
+ nvidia,pins = "uart2_cts_n_pj5",
+ "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Power I2C (On-module) */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
* temperature sensor therefore requires disabling for
* now
*/
- lcd_dc1_pd2 {
+ lcd-dc1-pd2 {
nvidia,pins = "lcd_dc1_pd2";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* TOUCH_PEN_INT# */
+ /* TOUCH_PEN_INT# (On-module) */
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd1";
};
};
- hdmiddc: i2c@7000c700 {
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006200 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
clock-frequency = <10000>;
};
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&sys_3v3_reg>;
- VDDIO-supply = <&sys_3v3_reg>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vio>;
+ VDDIO-supply = <®_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
- pmic: tps65911@2d {
+ pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
#gpio-cells = <2>;
gpio-controller;
- vcc1-supply = <&sys_3v3_reg>;
- vcc2-supply = <&sys_3v3_reg>;
- vcc3-supply = <&vio_reg>;
- vcc4-supply = <&sys_3v3_reg>;
- vcc5-supply = <&sys_3v3_reg>;
- vcc6-supply = <&vio_reg>;
- vcc7-supply = <&charge_pump_5v0_reg>;
- vccio-supply = <&sys_3v3_reg>;
+ vcc1-supply = <®_module_3v3>;
+ vcc2-supply = <®_module_3v3>;
+ vcc3-supply = <®_1v8_vio>;
+ vcc4-supply = <®_module_3v3>;
+ vcc5-supply = <®_module_3v3>;
+ vcc6-supply = <®_1v8_vio>;
+ vcc7-supply = <®_5v0_charge_pump>;
+ vccio-supply = <®_module_3v3>;
regulators {
- /* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
- regulator-name = "vddio_ddr_1v35";
+ regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- /* SW2: +V1.05 */
vdd2_reg: vdd2 {
- regulator-name =
- "vdd_pexa,vdd_pexb,vdd_sata";
+ regulator-name = "+V1.05";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
- /* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
- regulator-name = "vdd_cpu,vdd_sys";
+ regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- /* SWIO: +V1.8 */
- vio_reg: vio {
- regulator-name = "vdd_1v8_gen";
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
/*
* EN_+V3.3 switching via FET:
- * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
- * see also v3_3 fixed supply
+ * +V3.3_AUDIO_AVDD_S, +V3.3
+ * see also +V3.3 fixed supply
*/
ldo2_reg: ldo2 {
- regulator-name = "en_3v3";
+ regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- /* +V1.2_CSI */
ldo3_reg: ldo3 {
- regulator-name =
- "avdd_dsi_csi,pwrdet_mipi";
+ regulator-name = "+V1.2_CSI";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
- /* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
- regulator-name = "vdd_rtc";
+ regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
/*
* +V2.8_AVDD_VDAC:
- * only required for analog RGB
+ * only required for (unsupported) analog RGB
*/
ldo5_reg: ldo5 {
- regulator-name = "avdd_vdac";
+ regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
* granularity
*/
ldo6_reg: ldo6 {
- regulator-name = "avdd_plle";
+ regulator-name = "+V1.05_AVDD_PLLE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- /* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
- regulator-name = "avdd_pll";
+ regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- /* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
- regulator-name = "vdd_ddr_hs";
+ regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
/* STMPE811 touch screen controller */
- stmpe811@41 {
+ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
- interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
/*
* LM95245 temperature sensor
- * Note: OVERT_N directly connected to PMIC PWRDN
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
*/
temp-sensor@4c {
compatible = "national,lm95245";
};
/* SW: +V1.2_VDD_CORE */
- tps62362@60 {
+ regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
reg = <1>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>;
+ interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
};
};
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>;
+ interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
};
};
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
};
ahub@70080000 {
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- clk32k_in: clk@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ clk16m: osc4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
+ };
- clk16m: clk@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <16000000>;
- clock-output-names = "clk16m";
- };
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_1v8_vio>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- avdd_hdmi_pll_1v8_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "+V1.8_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vio_reg>;
- };
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- avdd_hdmi_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "+V3.3_AVDD_HDMI";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- charge_pump_5v0_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "tegra30-colibri.dtsi"
/ {
model = "Toradex Colibri T30 on Colibri Evaluation Board";
- compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30";
+ compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30",
+ "nvidia,tegra30";
aliases {
rtc0 = "/i2c@7000c000/rtc@68";
- rtc1 = "/i2c@7000d000/tps65911@2d";
+ rtc1 = "/i2c@7000d000/pmic@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
nvidia,panel = <&panel>;
};
};
+
hdmi@54280000 {
status = "okay";
+ hdmi-supply = <®_5v0>;
};
};
+ /* Colibri UART-A */
serial@70006000 {
status = "okay";
};
+ /* Colibri UART-C */
serial@70006040 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
+ /* Colibri UART-B */
serial@70006300 {
- compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
};
};
+ /* GEN2_I2C: unused */
+
+ /* CAM_I2C (I2C3): unused */
+
/* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */
- hdmiddc: i2c@7000c700 {
+ i2c@7000c700 {
status = "okay";
};
spi@7000d400 {
status = "okay";
spi-max-frequency = <25000000>;
- can0: can@0 {
+
+ can@0 {
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk16m>;
interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>;
+ /* CAN_INT */
+ interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <10000000>;
- };
- spidev0: spi@1 {
- compatible = "spidev";
- reg = <1>;
- spi-max-frequency = <25000000>;
+ vdd-supply = <®_3v3>;
+ xceiver-supply = <®_5v0>;
};
};
sdhci@78000200 {
status = "okay";
bus-width = <4>;
- cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
no-1-8-v;
};
/* EHCI instance 0: USB1_DP/N -> USBC_P/N */
usb@7d000000 {
status = "okay";
+ dr_mode = "otg";
};
usb-phy@7d000000 {
status = "okay";
- dr_mode = "otg";
- vbus-supply = <&usbc_vbus_reg>;
+ vbus-supply = <®_usbc_vbus>;
};
/* EHCI instance 2: USB3_DP/N -> USBH_P/N */
usb-phy@7d008000 {
status = "okay";
- vbus-supply = <&usbh_vbus_reg>;
+ vbus-supply = <®_usbh_vbus>;
};
backlight: backlight {
compatible = "pwm-backlight";
-
- /* PWM<A> */
- pwms = <&pwm 0 5000000>;
brightness-levels = <255 128 64 32 16 8 4 0>;
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <®_3v3>;
+ pwms = <&pwm 0 5000000>; /* PWM<A> */
};
- clocks {
- clk16m: clk@1 {
- compatible = "fixed-clock";
- reg = <1>;
- #clock-cells = <0>;
- clock-frequency = <16000000>;
- clock-output-names = "clk16m";
- };
+ clk16m: osc3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16000000>;
};
gpio-keys {
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
-
backlight = <&backlight>;
+ power-supply = <®_3v3>;
};
- pwmleds {
- compatible = "pwm-leds";
-
- pwmb {
- label = "PWM<B>";
- pwms = <&pwm 1 19600>;
- max-brightness = <255>;
- };
- pwmc {
- label = "PWM<C>";
- pwms = <&pwm 2 19600>;
- max-brightness = <255>;
- };
- pwmd {
- label = "PWM<D>";
- pwms = <&pwm 3 19600>;
- max-brightness = <255>;
- };
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V_SW";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
- regulators {
- sys_5v0_reg: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_5v0: regulator-5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "5V_SW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
- usbc_vbus_reg: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usbc_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&sys_5v0_reg>;
- };
+ reg_usbc_vbus: regulator-usbc-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v0>;
+ };
- /* USBH_PEN */
- usbh_vbus_reg: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usbh_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
- vin-supply = <&sys_5v0_reg>;
- };
+ /* USBH_PEN resp. USB_P_EN */
+ reg_usbh_vbus: regulator-usbh-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+ vin-supply = <®_5v0>;
};
};
// SPDX-License-Identifier: GPL-2.0
-#include <dt-bindings/input/input.h>
#include "tegra30.dtsi"
/*
* Toradex Colibri T30 Module Device Tree
- * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A
+ * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B
*/
/ {
- model = "Toradex Colibri T30";
- compatible = "toradex,colibri_t30", "nvidia,tegra30";
-
memory@80000000 {
reg = <0x80000000 0x40000000>;
};
host1x@50000000 {
hdmi@54280000 {
- vdd-supply = <&avdd_hdmi_3v3_reg>;
- pll-supply = <&avdd_hdmi_pll_1v8_reg>;
-
+ nvidia,ddc-i2c-bus = <&hdmi_ddc>;
nvidia,hpd-gpio =
<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
- nvidia,ddc-i2c-bus = <&hdmiddc>;
+ pll-supply = <®_1v8_avdd_hdmi_pll>;
+ vdd-supply = <®_3v3_avdd_hdmi>;
};
};
state_default: pinmux {
/* Analogue Audio (On-module) */
- clk1_out_pw4 {
+ clk1-out-pw4 {
nvidia,pins = "clk1_out_pw4";
nvidia,function = "extperiph1";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- dap3_fs_pp0 {
- nvidia,pins = "dap3_fs_pp0",
- "dap3_sclk_pp3",
- "dap3_din_pp1",
- "dap3_dout_pp2";
+ dap3-fs-pp0 {
+ nvidia,pins = "dap3_fs_pp0",
+ "dap3_sclk_pp3",
+ "dap3_din_pp1",
+ "dap3_dout_pp2";
nvidia,function = "i2s2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri Address/Data Bus (GMI) */
+ gmi-ad0-pg0 {
+ nvidia,pins = "gmi_ad0_pg0",
+ "gmi_ad2_pg2",
+ "gmi_ad3_pg3",
+ "gmi_ad4_pg4",
+ "gmi_ad5_pg5",
+ "gmi_ad6_pg6",
+ "gmi_ad7_pg7",
+ "gmi_ad8_ph0",
+ "gmi_ad9_ph1",
+ "gmi_ad10_ph2",
+ "gmi_ad11_ph3",
+ "gmi_ad12_ph4",
+ "gmi_ad13_ph5",
+ "gmi_ad14_ph6",
+ "gmi_ad15_ph7",
+ "gmi_adv_n_pk0",
+ "gmi_clk_pk1",
+ "gmi_cs4_n_pk2",
+ "gmi_cs2_n_pk3",
+ "gmi_iordy_pi5",
+ "gmi_oe_n_pi1",
+ "gmi_wait_pi7",
+ "gmi_wr_n_pi0",
+ "dap1_fs_pn0",
+ "dap1_din_pn1",
+ "dap1_dout_pn2",
+ "dap1_sclk_pn3",
+ "dap2_fs_pa2",
+ "dap2_sclk_pa3",
+ "dap2_din_pa4",
+ "dap2_dout_pa5",
+ "spi1_sck_px5",
+ "spi1_mosi_px4",
+ "spi1_cs0_n_px6",
+ "spi2_cs0_n_px3",
+ "spi2_miso_px1",
+ "spi2_mosi_px0",
+ "spi2_sck_px2",
+ "uart2_cts_n_pj5",
+ "uart2_rts_n_pj6";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Further pins may be used as GPIOs */
+ dap4-din-pp5 {
+ nvidia,pins = "dap4_din_pp5",
+ "dap4_dout_pp6",
+ "dap4_fs_pp4",
+ "dap4_sclk_pp7",
+ "pbb7",
+ "sdmmc1_clk_pz0",
+ "sdmmc1_cmd_pz1",
+ "sdmmc1_dat0_py7",
+ "sdmmc1_dat1_py6",
+ "sdmmc1_dat3_py4",
+ "uart3_cts_n_pa1",
+ "uart3_txd_pw6",
+ "uart3_rxd_pw7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-d18-pm2 {
+ nvidia,pins = "lcd_d18_pm2",
+ "lcd_d19_pm3",
+ "lcd_d20_pm4",
+ "lcd_d21_pm5",
+ "lcd_d22_pm6",
+ "lcd_d23_pm7",
+ "lcd_dc0_pn6",
+ "pex_l2_clkreq_n_pcc7";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-cs0-n-pn4 {
+ nvidia,pins = "lcd_cs0_n_pn4",
+ "lcd_sdin_pz2",
+ "pu0",
+ "pu1",
+ "pu2",
+ "pu3",
+ "pu4",
+ "pu5",
+ "pu6",
+ "spi1_miso_px7",
+ "uart3_rts_n_pc0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-pwr0-pb2 {
+ nvidia,pins = "lcd_pwr0_pb2",
+ "lcd_sck_pz4",
+ "lcd_sdout_pn5",
+ "lcd_wr_n_pz3";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pbb4 {
+ nvidia,pins = "pbb4",
+ "pbb5",
+ "pbb6";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed RDnWR and therefore disabled */
+ lcd-cs1-n-pw0 {
+ nvidia,pins = "lcd_cs1_n_pw0";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Multiplexed GMI_CLK and therefore disabled */
+ owr {
+ nvidia,pins = "owr";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */
+ sdmmc3-dat4-pd1 {
+ nvidia,pins = "sdmmc3_dat4_pd1";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ /* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */
+ sdmmc3-dat5-pd0 {
+ nvidia,pins = "sdmmc3_dat5_pd0";
+ nvidia,function = "sdmmc3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
/* Colibri BL_ON */
pv2 {
nvidia,pins = "pv2";
};
/* Colibri Backlight PWM<A> */
- sdmmc3_dat3_pb4 {
+ sdmmc3-dat3-pb4 {
nvidia,pins = "sdmmc3_dat3_pb4";
nvidia,function = "pwm0";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
};
/* Colibri CAN_INT */
- kb_row8_ps0 {
+ kb-row8-ps0 {
nvidia,pins = "kb_row8_ps0";
nvidia,function = "kbc";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
+ /* Colibri DDC */
+ ddc-scl-pv4 {
+ nvidia,pins = "ddc_scl_pv4",
+ "ddc_sda_pv5";
+ nvidia,function = "i2c4";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri EXT_IO* */
+ gen2-i2c-scl-pt5 {
+ nvidia,pins = "gen2_i2c_scl_pt5",
+ "gen2_i2c_sda_pt6";
+ nvidia,function = "rsvd4";
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ spdif-in-pk6 {
+ nvidia,pins = "spdif_in_pk6";
+ nvidia,function = "hda";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri GPIO */
+ clk2-out-pw5 {
+ nvidia,pins = "clk2_out_pw5",
+ "pcc2",
+ "pv3",
+ "sdmmc1_dat2_py5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ lcd-pwr1-pc1 {
+ nvidia,pins = "lcd_pwr1_pc1",
+ "pex_l1_clkreq_n_pdd6",
+ "pex_l1_rst_n_pdd5";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ pv1 {
+ nvidia,pins = "pv1",
+ "sdmmc3_dat0_pb7",
+ "sdmmc3_dat1_pb6";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri HOTPLUG_DETECT (HDMI) */
+ hdmi-int-pn7 {
+ nvidia,pins = "hdmi_int_pn7";
+ nvidia,function = "hdmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri I2C */
+ gen1-i2c-scl-pc4 {
+ nvidia,pins = "gen1_i2c_scl_pc4",
+ "gen1_i2c_sda_pc5";
+ nvidia,function = "i2c1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri LCD (L_* resp. LDD<*>) */
+ lcd-d0-pe0 {
+ nvidia,pins = "lcd_d0_pe0",
+ "lcd_d1_pe1",
+ "lcd_d2_pe2",
+ "lcd_d3_pe3",
+ "lcd_d4_pe4",
+ "lcd_d5_pe5",
+ "lcd_d6_pe6",
+ "lcd_d7_pe7",
+ "lcd_d8_pf0",
+ "lcd_d9_pf1",
+ "lcd_d10_pf2",
+ "lcd_d11_pf3",
+ "lcd_d12_pf4",
+ "lcd_d13_pf5",
+ "lcd_d14_pf6",
+ "lcd_d15_pf7",
+ "lcd_d16_pm0",
+ "lcd_d17_pm1",
+ "lcd_de_pj1",
+ "lcd_hsync_pj3",
+ "lcd_pclk_pb3",
+ "lcd_vsync_pj4";
+ nvidia,function = "displaya";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
/*
* Colibri L_BIAS, LCD_M1 is muxed with LCD_DE
- * todays display need DE, disable LCD_M1
+ * today's display need DE, disable LCD_M1
*/
- lcd_m1_pw1 {
+ lcd-m1-pw1 {
nvidia,pins = "lcd_m1_pw1";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Colibri MMC */
- kb_row10_ps2 {
+ kb-row10-ps2 {
nvidia,pins = "kb_row10_ps2";
nvidia,function = "sdmmc2";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- kb_row11_ps3 {
+ kb-row11-ps3 {
nvidia,pins = "kb_row11_ps3",
"kb_row12_ps4",
"kb_row13_ps5",
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
+ /* Colibri MMC_CD */
+ gmi-wp-n-pc7 {
+ nvidia,pins = "gmi_wp_n_pc7";
+ nvidia,function = "rsvd1";
+ nvidia,pull = <TEGRA_PIN_PULL_UP>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* Multiplexed and therefore disabled */
+ cam-mclk-pcc0 {
+ nvidia,pins = "cam_mclk_pcc0";
+ nvidia,function = "vi_alt3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ cam-i2c-scl-pbb1 {
+ nvidia,pins = "cam_i2c_scl_pbb1",
+ "cam_i2c_sda_pbb2";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+ };
+ pbb0 {
+ nvidia,pins = "pbb0",
+ "pcc1";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ pbb3 {
+ nvidia,pins = "pbb3";
+ nvidia,function = "displayb";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri nRESET_OUT */
+ gmi-rst-n-pi4 {
+ nvidia,pins = "gmi_rst_n_pi4";
+ nvidia,function = "gmi";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /*
+ * Colibri Parallel Camera (Optional)
+ * pins multiplexed with others and therefore disabled
+ */
+ vi-vsync-pd6 {
+ nvidia,pins = "vi_d0_pt4",
+ "vi_d1_pd5",
+ "vi_d2_pl0",
+ "vi_d3_pl1",
+ "vi_d4_pl2",
+ "vi_d5_pl3",
+ "vi_d6_pl4",
+ "vi_d7_pl5",
+ "vi_d8_pl6",
+ "vi_d9_pl7",
+ "vi_d10_pt2",
+ "vi_d11_pt3",
+ "vi_hsync_pd7",
+ "vi_mclk_pt1",
+ "vi_pclk_pt0",
+ "vi_vsync_pd6";
+ nvidia,function = "vi";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<B> */
+ sdmmc3-dat2-pb5 {
+ nvidia,pins = "sdmmc3_dat2_pb5";
+ nvidia,function = "pwm1";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<C> */
+ sdmmc3-clk-pa6 {
+ nvidia,pins = "sdmmc3_clk_pa6";
+ nvidia,function = "pwm2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri PWM<D> */
+ sdmmc3-cmd-pa7 {
+ nvidia,pins = "sdmmc3_cmd_pa7";
+ nvidia,function = "pwm3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
/* Colibri SSP */
- ulpi_clk_py0 {
+ ulpi-clk-py0 {
nvidia,pins = "ulpi_clk_py0",
"ulpi_dir_py1",
"ulpi_nxt_py2",
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- sdmmc3_dat6_pd3 {
+ /* Multiplexed SSPFRM, SSPTXD and therefore disabled */
+ sdmmc3-dat6-pd3 {
nvidia,pins = "sdmmc3_dat6_pd3",
"sdmmc3_dat7_pd4";
nvidia,function = "spdif";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_A */
- ulpi_data0 {
+ /* Colibri UART-A */
+ ulpi-data0 {
nvidia,pins = "ulpi_data0_po1",
"ulpi_data1_po2",
"ulpi_data2_po3",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_B */
- gmi_a16_pj7 {
+ /* Colibri UART-B */
+ gmi-a16-pj7 {
nvidia,pins = "gmi_a16_pj7",
"gmi_a17_pb0",
"gmi_a18_pb1",
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* Colibri UART_C */
- uart2_rxd {
+ /* Colibri UART-C */
+ uart2-rxd {
nvidia,pins = "uart2_rxd_pc3",
"uart2_txd_pc2";
nvidia,function = "uartb";
nvidia,tristate = <TEGRA_PIN_DISABLE>;
};
- /* eMMC */
- sdmmc4_clk_pcc4 {
+ /* Colibri USBC_DET */
+ spdif-out-pk5 {
+ nvidia,pins = "spdif_out_pk5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri USBH_PEN */
+ spi2-cs1-n-pw2 {
+ nvidia,pins = "spi2_cs1_n_pw2";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* Colibri USBH_OC */
+ spi2-cs2-n-pw3, {
+ nvidia,pins = "spi2_cs2_n_pw3";
+ nvidia,function = "spi2_alt";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Colibri VGA not supported and therefore disabled */
+ crt-hsync-pv6 {
+ nvidia,pins = "crt_hsync_pv6",
+ "crt_vsync_pv7";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* eMMC (On-module) */
+ sdmmc4-clk-pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
+ "sdmmc4_cmd_pt7",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
};
- sdmmc4_dat0_paa0 {
+ sdmmc4-dat0-paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
nvidia,function = "sdmmc4";
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* LAN_EXT_WAKEUP#, LAN_PME (On-module) */
+ pex-l0-rst-n-pdd1 {
+ nvidia,pins = "pex_l0_rst_n_pdd1",
+ "pex_wake_n_pdd3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+ /* LAN_V_BUS, LAN_RESET# (On-module) */
+ pex-l0-clkreq-n-pdd2 {
+ nvidia,pins = "pex_l0_clkreq_n_pdd2",
+ "pex_l0_prsnt_n_pdd0";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+
+ /* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */
+ pex-l2-rst-n-pcc6 {
+ nvidia,pins = "pex_l2_rst_n_pcc6",
+ "pex_l2_prsnt_n_pdd7";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+ nvidia,tristate = <TEGRA_PIN_DISABLE>;
+ nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ };
+
+ /* Not connected and therefore disabled */
+ clk1-req-pee2 {
+ nvidia,pins = "clk1_req_pee2",
+ "pex_l1_prsnt_n_pdd4";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ clk2-req-pcc5 {
+ nvidia,pins = "clk2_req_pcc5",
+ "clk3_out_pee0",
+ "clk3_req_pee1",
+ "clk_32k_out_pa0",
+ "hdmi_cec_pee3",
+ "sys_clk_req_pz5";
+ nvidia,function = "rsvd2";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ gmi-dqs-pi2 {
+ nvidia,pins = "gmi_dqs_pi2",
+ "kb_col2_pq2",
+ "kb_col3_pq3",
+ "kb_col4_pq4",
+ "kb_col5_pq5",
+ "kb_row4_pr4";
+ nvidia,function = "rsvd4";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-col0-pq0 {
+ nvidia,pins = "kb_col0_pq0",
+ "kb_col1_pq1",
+ "kb_col6_pq6",
+ "kb_col7_pq7",
+ "kb_row5_pr5",
+ "kb_row6_pr6",
+ "kb_row7_pr7",
+ "kb_row9_ps1";
+ nvidia,function = "kbc";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ kb-row0-pr0 {
+ nvidia,pins = "kb_row0_pr0",
+ "kb_row1_pr1",
+ "kb_row2_pr2",
+ "kb_row3_pr3";
+ nvidia,function = "rsvd3";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+ };
+ lcd-pwr2-pc6 {
+ nvidia,pins = "lcd_pwr2_pc6";
+ nvidia,function = "hdcp";
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
/* Power I2C (On-module) */
- pwr_i2c_scl_pz6 {
+ pwr-i2c-scl-pz6 {
nvidia,pins = "pwr_i2c_scl_pz6",
"pwr_i2c_sda_pz7";
nvidia,function = "i2cpwr";
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
nvidia,enable-input = <TEGRA_PIN_ENABLE>;
- nvidia,lock = <TEGRA_PIN_DISABLE>;
nvidia,open-drain = <TEGRA_PIN_ENABLE>;
};
* temperature sensor therefore requires disabling for
* now
*/
- lcd_dc1_pd2 {
+ lcd-dc1-pd2 {
nvidia,pins = "lcd_dc1_pd2";
nvidia,function = "rsvd3";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+ nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+ nvidia,tristate = <TEGRA_PIN_ENABLE>;
+ nvidia,enable-input = <TEGRA_PIN_DISABLE>;
};
- /* TOUCH_PEN_INT# */
+ /* TOUCH_PEN_INT# (On-module) */
pv0 {
nvidia,pins = "pv0";
nvidia,function = "rsvd1";
};
};
- hdmiddc: i2c@7000c700 {
+ serial@70006040 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ serial@70006300 {
+ compatible = "nvidia,tegra30-hsuart";
+ };
+
+ hdmi_ddc: i2c@7000c700 {
clock-frequency = <10000>;
};
/*
* PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
- * touch screen controller
+ * touch screen controller (On-module)
*/
i2c@7000d000 {
status = "okay";
sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
- VDDA-supply = <&sys_3v3_reg>;
- VDDIO-supply = <&sys_3v3_reg>;
+ VDDA-supply = <®_module_3v3_audio>;
+ VDDD-supply = <®_1v8_vio>;
+ VDDIO-supply = <®_module_3v3>;
clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
};
- pmic: tps65911@2d {
+ pmic: pmic@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
#gpio-cells = <2>;
gpio-controller;
- vcc1-supply = <&sys_3v3_reg>;
- vcc2-supply = <&sys_3v3_reg>;
- vcc3-supply = <&vio_reg>;
- vcc4-supply = <&sys_3v3_reg>;
- vcc5-supply = <&sys_3v3_reg>;
- vcc6-supply = <&vio_reg>;
- vcc7-supply = <&charge_pump_5v0_reg>;
- vccio-supply = <&sys_3v3_reg>;
+ vcc1-supply = <®_module_3v3>;
+ vcc2-supply = <®_module_3v3>;
+ vcc3-supply = <®_1v8_vio>;
+ vcc4-supply = <®_module_3v3>;
+ vcc5-supply = <®_module_3v3>;
+ vcc6-supply = <®_1v8_vio>;
+ vcc7-supply = <®_5v0_charge_pump>;
+ vccio-supply = <®_module_3v3>;
regulators {
- /* SW1: +V1.35_VDDIO_DDR */
vdd1_reg: vdd1 {
- regulator-name = "vddio_ddr_1v35";
+ regulator-name = "+V1.35_VDDIO_DDR";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
/* SW2: unused */
- /* SW CTRL: +V1.0_VDD_CPU */
vddctrl_reg: vddctrl {
- regulator-name = "vdd_cpu,vdd_sys";
+ regulator-name = "+V1.0_VDD_CPU";
regulator-min-microvolt = <1150000>;
regulator-max-microvolt = <1150000>;
regulator-always-on;
};
- /* SWIO: +V1.8 */
- vio_reg: vio {
- regulator-name = "vdd_1v8_gen";
+ reg_1v8_vio: vio {
+ regulator-name = "+V1.8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
/*
* EN_+V3.3 switching via FET:
* +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN
- * see also 3v3 fixed supply
+ * see also +V3.3 fixed supply
*/
ldo2_reg: ldo2 {
- regulator-name = "en_3v3";
+ regulator-name = "EN_+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
/* LDO3: unused */
- /* +V1.2_VDD_RTC */
ldo4_reg: ldo4 {
- regulator-name = "vdd_rtc";
+ regulator-name = "+V1.2_VDD_RTC";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
/*
* +V2.8_AVDD_VDAC:
- * only required for analog RGB
+ * only required for (unsupported) analog RGB
*/
ldo5_reg: ldo5 {
- regulator-name = "avdd_vdac";
+ regulator-name = "+V2.8_AVDD_VDAC";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
* granularity
*/
ldo6_reg: ldo6 {
- regulator-name = "avdd_plle";
+ regulator-name = "+V1.05_AVDD_PLLE";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
- /* +V1.2_AVDD_PLL */
ldo7_reg: ldo7 {
- regulator-name = "avdd_pll";
+ regulator-name = "+V1.2_AVDD_PLL";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
- /* +V1.0_VDD_DDR_HS */
ldo8_reg: ldo8 {
- regulator-name = "vdd_ddr_hs";
+ regulator-name = "+V1.0_VDD_DDR_HS";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
/* STMPE811 touch screen controller */
- stmpe811@41 {
+ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
- interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
- interrupt-parent = <&gpio>;
+ irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
id = <0>;
blocks = <0x5>;
/*
* LM95245 temperature sensor
- * Note: OVERT_N directly connected to PMIC PWRDN
+ * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN
*/
temp-sensor@4c {
compatible = "national,lm95245";
};
/* SW: +V1.2_VDD_CORE */
- tps62362@60 {
+ regulator@60 {
compatible = "ti,tps62362";
reg = <0x60>;
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
+
+ /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */
+ i2c-thermtrip {
+ nvidia,i2c-controller-id = <4>;
+ nvidia,bus-addr = <0x2d>;
+ nvidia,reg-addr = <0x3f>;
+ nvidia,reg-data = <0x1>;
+ };
+ };
+
+ hda@70030000 {
+ status = "okay";
};
ahub@70080000 {
status = "okay";
bus-width = <8>;
non-removable;
+ vmmc-supply = <®_module_3v3>; /* VCC */
+ vqmmc-supply = <®_1v8_vio>; /* VCCQ */
+ mmc-ddr-1_8v;
};
- /* EHCI instance 1: USB2_DP/N -> AX88772B */
+ /* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */
usb@7d004000 {
status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ asix@1 {
+ reg = <1>;
+ local-mac-address = [00 00 00 00 00 00];
+ };
};
usb-phy@7d004000 {
status = "okay";
- nvidia,is-wired = <1>;
+ vbus-supply = <®_lan_v_bus>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ clk32k_in: xtal1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
- clk32k_in: clk@0 {
- compatible = "fixed-clock";
- reg = <0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
+ reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll {
+ compatible = "regulator-fixed";
+ regulator-name = "+V1.8_AVDD_HDMI_PLL";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_1v8_vio>;
};
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+ reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AVDD_HDMI";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+ vin-supply = <®_module_3v3>;
+ };
- avdd_hdmi_pll_1v8_reg: regulator@100 {
- compatible = "regulator-fixed";
- reg = <100>;
- regulator-name = "+V1.8_AVDD_HDMI_PLL";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vio_reg>;
- };
+ reg_5v0_charge_pump: regulator-5v0-charge-pump {
+ compatible = "regulator-fixed";
+ regulator-name = "+V5.0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
- sys_3v3_reg: regulator@101 {
- compatible = "regulator-fixed";
- reg = <101>;
- regulator-name = "3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
+ reg_lan_v_bus: regulator-lan-v-bus {
+ compatible = "regulator-fixed";
+ regulator-name = "LAN_V_BUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+ };
- avdd_hdmi_3v3_reg: regulator@102 {
- compatible = "regulator-fixed";
- reg = <102>;
- regulator-name = "+V3.3_AVDD_HDMI";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- enable-active-high;
- gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
- vin-supply = <&sys_3v3_reg>;
- };
+ reg_module_3v3: regulator-module-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
- charge_pump_5v0_reg: regulator@103 {
- compatible = "regulator-fixed";
- reg = <103>;
- regulator-name = "5v0";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
+ reg_module_3v3_audio: regulator-module-3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "+V3.3_AUDIO_AVDD_S";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
};
sound {
clock-names = "pll_a", "pll_a_out0", "mclk";
};
};
+
+&gpio {
+ lan-reset-n {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LAN_RESET#";
+ };
+};
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <1>;
nvidia,xcvr-lsrslew = <1>;
nvidia,xcvr-hsslew = <32>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
nvidia,elastic-limit = <16>;
nvidia,term-range-adj = <6>;
nvidia,xcvr-setup = <51>;
- nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-setup-use-fuses;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
nvidia,xcvr-hsslew = <32>;
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&{/cpus/cpu@0}>,
+ <&{/cpus/cpu@1}>,
+ <&{/cpus/cpu@2}>,
+ <&{/cpus/cpu@3}>;
};
};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb0 {
status = "okay";
};
cache-level = <2>;
};
+ spi: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
};
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&nand {
status = "okay";
};
function = "sd";
};
+ pinctrl_sd_uhs: sd-uhs {
+ groups = "sd";
+ function = "sd";
+ };
+
pinctrl_sd1: sd1 {
groups = "sd1";
function = "sd1";
};
+ pinctrl_spi0: spi0 {
+ groups = "spi0";
+ function = "spi0";
+ };
+
+ pinctrl_spi1: spi1 {
+ groups = "spi1";
+ function = "spi1";
+ };
+
+ pinctrl_spi2: spi2 {
+ groups = "spi2";
+ function = "spi2";
+ };
+
+ pinctrl_spi3: spi3 {
+ groups = "spi3";
+ function = "spi3";
+ };
+
pinctrl_system_bus: system-bus {
groups = "system_bus", "system_bus_cs1";
function = "system_bus";
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb2 {
status = "okay";
};
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb2 {
status = "okay";
};
};
};
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
+
&nand {
status = "okay";
};
status = "okay";
};
+&emmc {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd1: sdhc@5a600000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a600000 0x200>;
+ interrupts = <0 85 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clocks = <&mio_clk 2>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 2>, <&mio_rst 5>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
usb2: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
pinctrl: pinctrl {
compatible = "socionext,uniphier-pro4-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-pro4-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb_phy3: phy@3 {
+ reg = <3>;
+ #phy-cells = <0>;
+ vbus-supply = <&usb1_vbus>;
+ };
+ };
};
soc-glue@5f900000 {
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 4>;
+ phys = <&usb_phy2>, <&usb0_ssphy>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x100>;
+
+ usb0_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+
+ usb0_ssphy: ss-phy@10 {
+ compatible = "socionext,uniphier-pro4-usb3-ssphy";
+ reg = <0x10 0x10>;
+ #phy-cells = <0>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ vbus-supply = <&usb0_vbus>;
+ };
+
+ usb0_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 14>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 14>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb1_rst 4>;
+ phys = <&usb_phy3>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pro4-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x100>;
+
+ usb1_vbus: regulator@0 {
+ compatible = "socionext,uniphier-pro4-usb3-regulator";
+ reg = <0 0x10>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+
+ usb1_rst: reset@40 {
+ compatible = "socionext,uniphier-pro4-usb3-reset";
+ reg = <0x40 0x4>;
+ #reset-cells = <1>;
+ clock-names = "gio", "link";
+ clocks = <&sys_clk 12>, <&sys_clk 15>;
+ reset-names = "gio", "link";
+ resets = <&sys_rst 12>, <&sys_rst 15>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5a";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
cache-level = <3>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
+
+ emmc: sdhc@68400000 {
+ compatible = "socionext,uniphier-sd-v3.1";
+ status = "disabled";
+ reg = <0x68400000 0x800>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&sd_clk 1>;
+ reset-names = "host", "hw";
+ resets = <&sd_rst 1>, <&sd_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd: sdhc@68800000 {
+ compatible = "socionext,uniphier-sd-v3.1";
+ status = "disabled";
+ reg = <0x68800000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
};
};
};
};
+&emmc {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
status = "okay";
};
+&emmc {
+ status = "okay";
+};
+
ð {
status = "okay";
phy-handle = <ðphy>;
reg = <1>;
};
};
+
+&usb0 {
+ status = "okay";
+};
cache-level = <2>;
};
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ emmc: sdhc@5a000000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a000000 0x800>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&sd_clk 1>;
+ reset-names = "host", "hw";
+ resets = <&sd_rst 1>, <&sd_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pxs2-soc-glue",
"simple-mfd", "syscon";
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs2-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs2-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs2-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs2-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs2-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 15>;
+ reset-names = "link";
+ resets = <&sys_rst 15>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 20>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs2-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 20>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs2-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 15>, <&sys_clk 21>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 15>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
&usb0 {
status = "okay";
};
cache-level = <2>;
};
+ spi: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
};
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a400000 0x200>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&mio_clk 0>;
+ reset-names = "host", "bridge";
+ resets = <&mio_rst 0>, <&mio_rst 3>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
+ emmc: sdhc@5a500000 {
+ compatible = "socionext,uniphier-sd-v2.91";
+ status = "disabled";
+ reg = <0x5a500000 0x200>;
+ interrupts = <0 78 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_emmc>;
+ clocks = <&mio_clk 1>;
+ reset-names = "host", "bridge", "hw";
+ resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ cap-mmc-hw-reset;
+ non-removable;
+ };
+
usb0: usb@5a800100 {
compatible = "socionext,uniphier-ehci", "generic-ehci";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand2cs>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
clock-names = "apb_pclk";
};
- ssp@101f4000 {
+ spi@101f4000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x101f4000 0x1000>;
interrupts = <11>;
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include "vfxxx.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
/dts-v1/;
#include "vf610.dtsi"
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
+
+ sff: sfp {
+ compatible = "sff,sff";
+ pinctrl-0 = <&pinctrl_optical>;
+ pinctrl-names = "default";
+ i2c-bus = <&i2c0>;
+ los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ };
};
&adc0 {
non-removable;
no-1-8-v;
keep-power-in-suspend;
+ no-sdio;
+ no-sd;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
+ no-sdio;
status = "okay";
};
label = "eth_cu_1000_3";
};
+ port@5 {
+ reg = <5>;
+ label = "eth_fc_1000_1";
+ phy-mode = "1000base-x";
+ managed = "in-band-status";
+ sfp = <&sff>;
+ };
+
port@6 {
reg = <6>;
label = "cpu";
>;
};
+ pinctrl_optical: optical-grp {
+ fsl,pins = <
+ /* SFF SD input */
+ VF610_PAD_PTE27__GPIO_132 0x3061
+
+ /* SFF Transmit disable output */
+ VF610_PAD_PTE13__GPIO_118 0x3043
+ >;
+ };
+
pinctrl_switch: switch-grp {
fsl,pins = <
VF610_PAD_PTB28__GPIO_98 0x3061
phy-handle = <&switch1phy4>;
};
+ port@9 {
+ reg = <9>;
+ label = "sff2";
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ sfp = <&sff2>;
+ };
switch1port10: port@10 {
reg = <10>;
#size-cells = <0>;
};
};
+
+ sff2: sff2 {
+ /* lower */
+ compatible = "sff,sff";
+ i2c-bus = <&sff2_i2c>;
+ los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+ };
+
+ sff3: sff3 {
+ /* upper */
+ compatible = "sff,sff";
+ i2c-bus = <&sff3_i2c>;
+ los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+ };
};
&dspi0 {
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
gpio-controller;
interrupt-controller;
-
- enet_swr_en {
- gpio-hog;
- gpios = <0 GPIO_ACTIVE_HIGH>;
- output-high;
- line-name = "enet-swr-en";
- };
};
/*
reg = <0>;
};
- i2c@1 {
+ sff2_i2c: i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
-
- sfp2: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
};
- i2c@2 {
+ sff3_i2c: i2c@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
-
- sfp3: at24c04@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- };
};
i2c@3 {
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
+
#include "vf500.dtsi"
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
#include "vf610-pinfunc.h"
#include <dt-bindings/clock/vf610-clock.h>
status = "disabled";
};
- dspi0: dspi0@4002c000 {
+ dspi0: spi@4002c000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
status = "disabled";
};
- dspi1: dspi1@4002d000 {
+ dspi1: spi@4002d000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
status = "disabled";
};
- qspi0: quadspi@40044000 {
+ qspi0: spi@40044000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
status = "disabled";
};
- dspi2: dspi2@400ac000 {
+ dspi2: spi@400ac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
status = "disabled";
};
- dspi3: dspi3@400ad000 {
+ dspi3: spi@400ad000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-dspi";
status = "disabled";
};
- qspi1: quadspi@400c4000 {
+ qspi1: spi@400c4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,vf610-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <7>;
- hwmon@52 {
+ hwmon@34 {
compatible = "ti,ucd9248";
- reg = <52>;
+ reg = <0x34>;
};
- hwmon@53 {
+ hwmon@35 {
compatible = "ti,ucd9248";
- reg = <53>;
+ reg = <0x35>;
};
- hwmon@54 {
+ hwmon@36 {
compatible = "ti,ucd9248";
- reg = <54>;
+ reg = <0x36>;
};
};
};
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- flash@0 {
+ flash@1 {
compatible = "sst25wf080", "jedec,spi-nor";
reg = <1>;
spi-max-frequency = <1000000>;
status = "okay";
num-cs = <4>;
is-decoded-cs = <0>;
- eeprom: eeprom@0 {
+ eeprom: eeprom@2 {
at25,byte-len = <8192>;
at25,addr-mode = <2>;
at25,page-size = <32>;
#define EXYNOS_SLEEP_MAGIC 0x00000bad
#define EXYNOS_AFTR_MAGIC 0xfcba0d10
+bool __init exynos_secure_firmware_available(void);
void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
}
-void __init exynos_firmware_init(void)
+bool __init exynos_secure_firmware_available(void)
{
struct device_node *nd;
const __be32 *addr;
nd = of_find_compatible_node(NULL, NULL,
"samsung,secure-firmware");
if (!nd)
- return;
+ return false;
addr = of_get_address(nd, 0, NULL, NULL);
if (!addr) {
pr_err("%s: No address specified.\n", __func__);
- return;
+ return false;
}
+ return true;
+}
+
+void __init exynos_firmware_init(void)
+{
+ if (!exynos_secure_firmware_available())
+ return;
+
pr_info("Running under secure firmware.\n");
register_firmware_ops(&exynos_firmware_ops);
int (*cpu_suspend)(unsigned long);
};
-static const struct exynos_pm_data *pm_data __ro_after_init;
+/* Used only on Exynos542x/5800 */
+struct exynos_pm_state {
+ int cpu_state;
+ unsigned int pmu_spare3;
+ void __iomem *sysram_base;
+};
-static int exynos5420_cpu_state;
-static unsigned int exynos_pmu_spare3;
+static const struct exynos_pm_data *pm_data __ro_after_init;
+static struct exynos_pm_state pm_state;
/*
* GIC wake-up support
unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+ writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
/* Set wake-up mask registers */
exynos_pm_set_wakeup_mask();
- exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
+ pm_state.pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
/*
* The cpu state needs to be saved and restored so that the
* secondary CPUs will enter low power start. Though the U-Boot
* needs to restore it back in case, the primary cpu fails to
* suspend for any reason.
*/
- exynos5420_cpu_state = readl_relaxed(sysram_base_addr +
- EXYNOS5420_CPU_STATE);
+ pm_state.cpu_state = readl_relaxed(pm_state.sysram_base +
+ EXYNOS5420_CPU_STATE);
exynos_pm_enter_sleep_mode();
EXYNOS5_ARM_CORE0_SYS_PWR_REG);
/* Restore the sysram cpu state register */
- writel_relaxed(exynos5420_cpu_state,
- sysram_base_addr + EXYNOS5420_CPU_STATE);
+ writel_relaxed(pm_state.cpu_state,
+ pm_state.sysram_base + EXYNOS5420_CPU_STATE);
pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
S5P_CENTRAL_SEQ_OPTION);
if (exynos_pm_central_resume())
goto early_wakeup;
- pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
+ pmu_raw_writel(pm_state.pmu_spare3, S5P_PMU_SPARE3);
early_wakeup:
register_syscore_ops(&exynos_pm_syscore_ops);
suspend_set_ops(&exynos_suspend_ops);
+
+ /*
+ * Applicable as of now only to Exynos542x. If booted under secure
+ * firmware, the non-secure region of sysram should be used.
+ */
+ if (exynos_secure_firmware_available())
+ pm_state.sysram_base = sysram_ns_base_addr;
+ else
+ pm_state.sysram_base = sysram_base_addr;
}
#define gta02_udc_vbus_draw NULL
#endif
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
static char *gta02_batteries[] = {
"battery",
};
},
},
- .probe_done = gta02_pmu_attach_child_devices,
.mbc_event_callback = gta02_pmu_event_callback,
};
&s3c_device_ts,
};
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device. Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent. This makes them get suspended and
- * resumed with their parent the pcf50633 still around. All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
- int n;
-
- /* Grab a copy of the now probed PMU pointer. */
- gta02_pcf = pcf;
-
- for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
- gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
- platform_add_devices(gta02_devices_pmu_children,
- ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
static void gta02_poweroff(void)
{
pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
};
#define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
[0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
[2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = UCON,
- .ulcon = ULCON,
- .ufcon = UFCON,
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
},
};
/*
* This macro simplifies the table bellow
*/
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
- _yres,margin_top,margin_bottom,vsync, refresh) \
+#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
+ _yres, margin_top, margin_bottom, vsync, refresh) \
.width = _xres, \
.xres = _xres, \
.height = _yres, \
[0] = { /* mini2440 + 3.5" TFT + touchscreen */
_LCD_DECLARE(
7, /* The 3.5 is quite fast */
- 240, 21, 38, 6, /* x timing */
+ 240, 21, 38, 6, /* x timing */
320, 4, 4, 2, /* y timing */
60), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
[1] = { /* mini2440 + 7" TFT + touchscreen */
_LCD_DECLARE(
10, /* the 7" runs slower */
- 800, 40, 40, 48, /* x timing */
+ 800, 40, 40, 48, /* x timing */
480, 29, 3, 3, /* y timing */
50), /* refresh rate */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_INVVFRAME |
S3C2410_LCDCON5_PWREN),
},
- /* The VGA shield can outout at several resolutions. All share
+ /* The VGA shield can outout at several resolutions. All share
* the same timings, however, anything smaller than 1024x768
* will only be displayed in the top left corner of a 1024x768
* XGA output unless you add optional dip switches to the shield.
_LCD_DECLARE(
10,
1024, 1, 2, 2, /* y timing */
- 768, 200, 16, 16, /* x timing */
+ 768, 200, 16, 16, /* x timing */
24), /* refresh rate, maximum stable,
- tested with the FPGA shield */
+ * tested with the FPGA shield
+ */
.lcdcon5 = (S3C2410_LCDCON5_FRM565 |
S3C2410_LCDCON5_HWSWP),
},
/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
* and disable the pull down resistors on pins we are using for LCD
- * data. */
+ * data.
+ */
.gpcup = (0xf << 1) | (0x3f << 10),
/* MMC/SD */
static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
- .gpio_detect = S3C2410_GPG(8),
- .gpio_wprotect = S3C2410_GPH(8),
- .set_power = NULL,
- .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_detect = S3C2410_GPG(8),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .wprotect_invert = 1,
+ .set_power = NULL,
+ .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
};
/* NAND Flash on MINI2440 board */
[2] = {
.name = "kernel",
/* 5 megabytes, for a kernel with no modules
- * or a uImage with a ramdisk attached */
+ * or a uImage with a ramdisk attached
+ */
.size = 0x00500000,
.offset = SZ_256K + SZ_128K,
},
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(mini2440_default_nand_part),
.partitions = mini2440_default_nand_part,
- .flash_bbt = 1, /* we use u-boot to create a BBT */
+ .flash_bbt = 1, /* we use u-boot to create a BBT */
},
};
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
- .ecc_mode = NAND_ECC_HW,
+ .ecc_mode = NAND_ECC_HW,
};
/* DM9000AEP 10/100 ethernet controller */
static struct resource mini2440_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
- [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+ [2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE),
};
},
#if 0
/* this pin is also known as TCLK1 and seems to already
- * marked as "in use" somehow in the kernel -- possibly wrongly */
+ * marked as "in use" somehow in the kernel -- possibly wrongly
+ */
{
.gpio = S3C2410_GPG(11), /* K6 */
.code = KEY_F6,
static int __init mini2440_features_setup(char *str)
{
if (str)
- strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
+ strlcpy(mini2440_features_str, str,
+ sizeof(mini2440_features_str));
return 1;
}
};
static void __init mini2440_parse_features(
- struct mini2440_features_t * features,
- const char * features_str )
+ struct mini2440_features_t *features,
+ const char *features_str)
{
- const char * fp = features_str;
+ const char *fp = features_str;
features->count = 0;
features->done = 0;
switch (f) {
case '0'...'9': /* tft screen */
if (features->done & FEATURE_SCREEN) {
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "screen type already set\n", f);
+ pr_info("MINI2440: '%c' ignored, screen type already set\n",
+ f);
} else {
int li = f - '0';
+
if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
- printk(KERN_INFO "MINI2440: "
- "'%c' out of range LCD mode\n", f);
+ pr_info("MINI2440: '%c' out of range LCD mode\n",
+ f);
else {
features->optional[features->count++] =
&s3c_device_lcd;
break;
case 'b':
if (features->done & FEATURE_BACKLIGHT)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "backlight already set\n", f);
+ pr_info("MINI2440: '%c' ignored, backlight already set\n",
+ f);
else {
features->optional[features->count++] =
&mini2440_led_backlight;
features->done |= FEATURE_BACKLIGHT;
break;
case 't':
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "touchscreen not compiled in\n", f);
+ pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
+ f);
break;
case 'c':
if (features->done & FEATURE_CAMERA)
- printk(KERN_INFO "MINI2440: '%c' ignored, "
- "camera already registered\n", f);
+ pr_info("MINI2440: '%c' ignored, camera already registered\n",
+ f);
else
features->optional[features->count++] =
&s3c_device_camif;
struct mini2440_features_t features = { 0 };
int i;
- printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
+ pr_info("MINI2440: Option string mini2440=%s\n",
mini2440_features_str);
/* Parse the feature string */
mini2440_fb_info.displays =
&mini2440_lcd_cfg[features.lcd_index];
- printk(KERN_INFO "MINI2440: LCD");
+ pr_info("MINI2440: LCD");
for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
if (li == features.lcd_index)
- printk(" [%d:%dx%d]", li,
+ pr_cont(" [%d:%dx%d]", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
else
- printk(" %d:%dx%d", li,
+ pr_cont(" %d:%dx%d", li,
mini2440_lcd_cfg[li].width,
mini2440_lcd_cfg[li].height);
- printk("\n");
+ pr_cont("\n");
s3c24xx_fb_set_platdata(&mini2440_fb_info);
}
+# SPDX-License-Identifier: GPL-2.0+
+
dtb-$(CONFIG_ARCH_ACTIONS) += s700-cubieboard7.dtb
dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
device_type = "memory";
reg = <0x1 0xe0000000 0x0 0x0>;
};
-
- uart3_clk: uart3-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
- };
};
&timer {
&uart3 {
status = "okay";
- clocks = <&uart3_clk>;
};
* Copyright (c) 2017 Andreas Färber
*/
+#include <dt-bindings/clock/actions,s700-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#clock-cells = <0>;
};
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
uart0: serial@e0120000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0120000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART0>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart1: serial@e0122000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0122000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART1>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart2: serial@e0124000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0124000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART2>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart3: serial@e0126000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0126000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART3>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart4: serial@e0128000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0128000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART4>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart5: serial@e012a000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012a000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART5>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart6: serial@e012c000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012c000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART6>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ cmu: clock-controller@e0168000 {
+ compatible = "actions,s700-cmu";
+ reg = <0x0 0xe0168000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ };
+
sps: power-controller@e01b0100 {
compatible = "actions,s700-sps";
reg = <0x0 0xe01b0100 0x0 0x100>;
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
/dts-v1/;
device_type = "memory";
reg = <0x0 0x0 0x0 0x80000000>;
};
+};
+
+&i2c0 {
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_default>;
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_default>;
+};
+
+&i2c2 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_default>;
+};
+
+/*
+ * GPIO name legend: proper name = the GPIO line is used as GPIO
+ * NC = not connected (pin out but not routed from the chip to
+ * anything the board)
+ * "[PER]" = pin is muxed for [peripheral] (not GPIO)
+ * LSEC = Low Speed External Connector
+ * HSEC = High Speed External Connector
+ *
+ * Line names are taken from the schematic "Schematics Bubblegum96"
+ * version v1.0
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Boards naming of a line and the schematic name of
+ * the same line are in conflict, the 96Boards specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. Only exception is the I2C lines for which the schematic
+ * naming has been preferred. This is only for the informational
+ * lines i.e. "[FOO]", the GPIO named lines "GPIO-A" thru "GPIO-L"
+ * are the only ones actually used for GPIO.
+ */
+
+&pinctrl {
+ gpio-line-names =
+ "GPIO-A", /* GPIO_0, LSEC pin 23 */
+ "GPIO-B", /* GPIO_1, LSEC pin 24 */
+ "GPIO-C", /* GPIO_2, LSEC pin 25 */
+ "GPIO-D", /* GPIO_3, LSEC pin 26 */
+ "GPIO-E", /* GPIO_4, LSEC pin 27 */
+ "GPIO-F", /* GPIO_5, LSEC pin 28 */
+ "GPIO-G", /* GPIO_6, LSEC pin 29 */
+ "GPIO-H", /* GPIO_7, LSEC pin 30 */
+ "GPIO-I", /* GPIO_8, LSEC pin 31 */
+ "GPIO-J", /* GPIO_9, LSEC pin 32 */
+ "NC", /* GPIO_10 */
+ "NC", /* GPIO_11 */
+ "SIRQ2_1V8", /* GPIO_12 */
+ "PCM0_OUT", /* GPIO_13 */
+ "WIFI_LED", /* GPIO_14 */
+ "PCM0_SYNC", /* GPIO_15 */
+ "PCM0_CLK", /* GPIO_16 */
+ "PCM0_IN", /* GPIO_17 */
+ "BT_LED", /* GPIO_18 */
+ "LED0", /* GPIO_19 */
+ "LED1", /* GPIO_20 */
+ "JTAG_TCK", /* GPIO_21 */
+ "JTAG_TMS", /* GPIO_22 */
+ "JTAG_TDI", /* GPIO_23 */
+ "JTAG_TDO", /* GPIO_24 */
+ "[UART1_RxD]", /* GPIO_25, LSEC pin 13 */
+ "NC", /* GPIO_26 */
+ "[UART1_TxD]", /* GPIO_27, LSEC pin 11 */
+ "SD0_D0", /* GPIO_28 */
+ "SD0_D1", /* GPIO_29 */
+ "SD0_D2", /* GPIO_30 */
+ "SD0_D3", /* GPIO_31 */
+ "SD1_D0", /* GPIO_32 */
+ "SD1_D1", /* GPIO_33 */
+ "SD1_D2", /* GPIO_34 */
+ "SD1_D3", /* GPIO_35 */
+ "SD0_CMD", /* GPIO_36 */
+ "SD0_CLK", /* GPIO_37 */
+ "SD1_CMD", /* GPIO_38 */
+ "SD1_CLK", /* GPIO_39 */
+ "SPI0_SCLK", /* GPIO_40, LSEC pin 8 */
+ "SPI0_CS", /* GPIO_41, LSEC pin 12 */
+ "SPI0_DIN", /* GPIO_42, LSEC pin 10 */
+ "SPI0_DOUT", /* GPIO_43, LSEC pin 14 */
+ "I2C5_SDATA", /* GPIO_44, HSEC pin 36 */
+ "I2C5_SCLK", /* GPIO_45, HSEC pin 38 */
+ "UART0_RX", /* GPIO_46, LSEC pin 7 */
+ "UART0_TX", /* GPIO_47, LSEC pin 5 */
+ "UART0_RTSB", /* GPIO_48, LSEC pin 9 */
+ "UART0_CTSB", /* GPIO_49, LSEC pin 3 */
+ "I2C4_SCLK", /* GPIO_50, HSEC pin 32 */
+ "I2C4_SDATA", /* GPIO_51, HSEC pin 34 */
+ "I2C0_SCLK", /* GPIO_52 */
+ "I2C0_SDATA", /* GPIO_53 */
+ "I2C1_SCLK", /* GPIO_54, LSEC pin 15 */
+ "I2C1_SDATA", /* GPIO_55, LSEC pin 17 */
+ "I2C2_SCLK", /* GPIO_56, LSEC pin 19 */
+ "I2C2_SDATA", /* GPIO_57, LSEC pin 21 */
+ "CSI0_DN0", /* GPIO_58, HSEC pin 10 */
+ "CSI0_DP0", /* GPIO_59, HSEC pin 8 */
+ "CSI0_DN1", /* GPIO_60, HSEC pin 16 */
+ "CSI0_DP1", /* GPIO_61, HSEC pin 14 */
+ "CSI0_CN", /* GPIO_62, HSEC pin 4 */
+ "CSI0_CP", /* GPIO_63, HSEC pin 2 */
+ "CSI0_DN2", /* GPIO_64, HSEC pin 22 */
+ "CSI0_DP2", /* GPIO_65, HSEC pin 20 */
+ "CSI0_DN3", /* GPIO_66, HSEC pin 28 */
+ "CSI0_DP3", /* GPIO_67, HSEC pin 26 */
+ "[CLK0]", /* GPIO_68, HSEC pin 15 */
+ "CSI1_DN0", /* GPIO_69, HSEC pin 44 */
+ "CSI1_DP0", /* GPIO_70, HSEC pin 42 */
+ "CSI1_DN1", /* GPIO_71, HSEC pin 50 */
+ "CSI1_DP1", /* GPIO_72, HSEC pin 48 */
+ "CSI1_CN", /* GPIO_73, HSEC pin 56 */
+ "CSI1_CP", /* GPIO_74, HSEC pin 54 */
+ "[CLK1]", /* GPIO_75, HSEC pin 17 */
+ "[GPIOD0]", /* GPIO_76 */
+ "[GPIOD1]", /* GPIO_77 */
+ "BT_RST_N", /* GPIO_78 */
+ "EXT_DC_EN", /* GPIO_79 */
+ "[PCM_DI]", /* GPIO_80, LSEC pin 22 */
+ "[PCM_DO]", /* GPIO_81, LSEC pin 20 */
+ "[PCM_CLK]", /* GPIO_82, LSEC pin 18 */
+ "[PCM_FS]", /* GPIO_83, LSEC pin 16 */
+ "WAKE_BT", /* GPIO_84 */
+ "WL_REG_ON", /* GPIO_85 */
+ "NC", /* GPIO_86 */
+ "NC", /* GPIO_87 */
+ "NC", /* GPIO_88 */
+ "NC", /* GPIO_89 */
+ "NC", /* GPIO_90 */
+ "WIFI_WAKE", /* GPIO_91 */
+ "BT_WAKE", /* GPIO_92 */
+ "NC", /* GPIO_93 */
+ "OTG_EN2", /* GPIO_94 */
+ "OTG_EN", /* GPIO_95 */
+ "DSI_DP3", /* GPIO_96, HSEC pin 45 */
+ "DSI_DN3", /* GPIO_97, HSEC pin 47 */
+ "DSI_DP1", /* GPIO_98, HSEC pin 33 */
+ "DSI_DN1", /* GPIO_99, HSEC pin 35 */
+ "DSI_CP", /* GPIO_100, HSEC pin 21 */
+ "DSI_CN", /* GPIO_101, HSEC pin 23 */
+ "DSI_DP0", /* GPIO_102, HSEC pin 27 */
+ "DSI_DN0", /* GPIO_103, HSEC pin 29 */
+ "DSI_DP2", /* GPIO_104, HSEC pin 39 */
+ "DSI_DN2", /* GPIO_105, HSEC pin 41 */
+ "N0_D0", /* GPIO_106 */
+ "N0_D1", /* GPIO_107 */
+ "N0_D2", /* GPIO_108 */
+ "N0_D3", /* GPIO_109 */
+ "N0_D4", /* GPIO_110 */
+ "N0_D5", /* GPIO_111 */
+ "N0_D6", /* GPIO_112 */
+ "N0_D7", /* GPIO_113 */
+ "N0_DQS", /* GPIO_114 */
+ "N0_DQSN", /* GPIO_115 */
+ "NC", /* GPIO_116 */
+ "NC", /* GPIO_117 */
+ "NC", /* GPIO_118 */
+ "N0_CEB1", /* GPIO_119 */
+ "CARD_DT", /* GPIO_120 */
+ "N0_CEB3", /* GPIO_121 */
+ "SD_DAT0", /* GPIO_122, HSEC pin 1 */
+ "SD_DAT1", /* GPIO_123, HSEC pin 3 */
+ "SD_DAT2", /* GPIO_124, HSEC pin 5 */
+ "SD_DAT3", /* GPIO_125, HSEC pin 7 */
+ "NC", /* GPIO_126 */
+ "NC", /* GPIO_127 */
+ "[PWR_BTN_N]", /* GPIO_128, LSEC pin 4 */
+ "[RST_BTN_N]", /* GPIO_129, LSEC pin 6 */
+ "NC", /* GPIO_130 */
+ "SD_CMD", /* GPIO_131 */
+ "GPIO-L", /* GPIO_132, LSEC pin 34 */
+ "GPIO-K", /* GPIO_133, LSEC pin 33 */
+ "NC", /* GPIO_134 */
+ "SD_SCLK", /* GPIO_135 */
+ "NC", /* GPIO_136 */
+ "JTAG_TRST", /* GPIO_137 */
+ "I2C3_SCLK", /* GPIO_138 */
+ "LED2", /* GPIO_139 */
+ "LED3", /* GPIO_140 */
+ "I2C3_SDATA", /* GPIO_141 */
+ "UART3_RX", /* GPIO_142 */
+ "UART3_TX", /* GPIO_143 */
+ "UART3_RTSB", /* GPIO_144 */
+ "UART3_CTSB"; /* GPIO_145 */
+
+ i2c0_default: i2c0-default {
+ pinmux {
+ groups = "i2c0_mfp";
+ function = "i2c0";
+ };
+ pinconf {
+ pins = "i2c0_sclk", "i2c0_sdata";
+ bias-pull-up;
+ };
+ };
+
+ i2c1_default: i2c1-default {
+ pinconf {
+ pins = "i2c1_sclk", "i2c1_sdata";
+ bias-pull-up;
+ };
+ };
- uart5_clk: uart5-clk {
- compatible = "fixed-clock";
- clock-frequency = <921600>;
- #clock-cells = <0>;
+ i2c2_default: i2c2-default {
+ pinconf {
+ pins = "i2c2_sclk", "i2c2_sdata";
+ bias-pull-up;
+ };
};
};
&uart5 {
status = "okay";
- clocks = <&uart5_clk>;
};
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Andreas Färber
- *
- * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
*/
+#include <dt-bindings/clock/actions,s900-cmu.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#clock-cells = <0>;
};
+ losc: losc {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+
+ diff24M: diff24M {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
uart0: serial@e0120000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0120000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART0>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart1: serial@e0122000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0122000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART1>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart2: serial@e0124000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0124000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART2>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart3: serial@e0126000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0126000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART3>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart4: serial@e0128000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe0128000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART4>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart5: serial@e012a000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012a000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART5>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart6: serial@e012c000 {
compatible = "actions,s900-uart", "actions,owl-uart";
reg = <0x0 0xe012c000 0x0 0x2000>;
+ clocks = <&cmu CLK_UART6>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ sps: power-controller@e012e000 {
+ compatible = "actions,s900-sps";
+ reg = <0x0 0xe012e000 0x0 0x2000>;
+ #power-domain-cells = <1>;
+ };
+
+ cmu: clock-controller@e0160000 {
+ compatible = "actions,s900-cmu";
+ reg = <0x0 0xe0160000 0x0 0x1000>;
+ clocks = <&hosc>, <&losc>;
+ #clock-cells = <1>;
+ };
+
+ i2c0: i2c@e0170000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0170000 0 0x1000>;
+ clocks = <&cmu CLK_I2C0>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e0172000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0172000 0 0x1000>;
+ clocks = <&cmu CLK_I2C1>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e0174000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0174000 0 0x1000>;
+ clocks = <&cmu CLK_I2C2>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e0176000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0176000 0 0x1000>;
+ clocks = <&cmu CLK_I2C3>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e0178000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe0178000 0 0x1000>;
+ clocks = <&cmu CLK_I2C4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e017a000 {
+ compatible = "actions,s900-i2c";
+ reg = <0 0xe017a000 0 0x1000>;
+ clocks = <&cmu CLK_I2C5>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@e01b0000 {
+ compatible = "actions,s900-pinctrl";
+ reg = <0x0 0xe01b0000 0x0 0x1000>;
+ clocks = <&cmu CLK_GPIO>;
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 146>;
+ #gpio-cells = <2>;
+ };
+
timer: timer@e0228000 {
compatible = "actions,s900-timer";
reg = <0x0 0xe0228000 0x0 0x8000>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "timer1";
};
+
+ dma: dma-controller@e0260000 {
+ compatible = "actions,s900-dma";
+ reg = <0x0 0xe0260000 0x0 0x1000>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ dma-channels = <12>;
+ dma-requests = <46>;
+ clocks = <&cmu CLK_DMAC>;
+ };
};
};
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds {
compatible = "gpio-leds";
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
};
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
+ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <®_dcdc1>;
bus-width = <8>;
non-removable;
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
compatible = "friendlyarm,nanopi-a64", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ blue {
+ label = "nanopi-a64:blue:status";
+ gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */
+ };
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rtc 1>;
+ clock-names = "ext_clock";
+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_dcdc1>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
/* i2c1 connected with gpio headers like pine64, bananapi */
&i2c1 {
pinctrl-names = "default";
bias-pull-up;
};
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
status = "okay";
};
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+
+ rtl8189etv: wifi@1 {
+ reg = <1>;
+ interrupt-parent = <&r_pio>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
+ interrupt-names = "host-wake";
+ };
+};
+
&ohci0 {
status = "okay";
};
®_dcdc1 {
regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc-3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
};
®_dcdc2 {
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
compatible = "olimex,a64-olinuxino", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
};
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 6 9 GPIO_ACTIVE_HIGH>; /* PG9 */
+ status = "okay";
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
};
};
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_dcdc1>;
+ allwinner,tx-delay-ps = <600>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
};
};
+&ohci0 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
&r_rsb {
status = "okay";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
};
};
/* DCDC3 is polyphased with DCDC2 */
+/*
+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
+ * 1.35V that the PMIC can drive.
+ */
®_dcdc5 {
regulator-always-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
regulator-name = "vcc-ddr3";
};
regulator-name = "vcc-wifi-io";
};
+®_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
®_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
status = "okay";
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus-supply = <®_drivevbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
};
/*
* Copyright (C) 2017 Jagan Teki <jteki@openedev.com>
+ * Copyright (C) 2017-2018 Samuel Holland <samuel@sholland.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
compatible = "xunlong,orangepi-win", "allwinner,sun50i-a64";
aliases {
+ ethernet0 = &emac;
serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "orangepi:green:status";
+ gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+ };
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 14 GPIO_ACTIVE_HIGH>; /* PD14 */
+ status = "okay";
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* PD7 */
+ status = "okay";
+ };
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
+ };
+};
+
+&de {
+ status = "okay";
+};
+
+&ehci0 {
+ status = "okay";
};
&ehci1 {
status = "okay";
};
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ phy-mode = "rgmii";
+ phy-handle = <&ext_rgmii_phy>;
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+};
+
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
+&mdio {
+ ext_rgmii_phy: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
+
&mmc0 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <®_dldo2>;
+ vqmmc-supply = <®_dldo4>;
+ mmc-pwrseq = <&wifi_pwrseq>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&ohci0 {
status = "okay";
};
#include "axp803.dtsi"
®_aldo1 {
- regulator-always-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
regulator-name = "afvcc-csi";
};
regulator-name = "vcc-wifi-io";
};
+®_drivevbus {
+ regulator-name = "usb0-vbus";
+ status = "okay";
+};
+
®_eldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "cpvdd";
};
+®_eldo3 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "dvdd-csi";
+};
+
®_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vcc-hdmi-supply = <®_dldo1>;
};
+&spi0 {
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <80000000>;
+ m25p,fast-read;
+ status = "okay";
+ };
+};
+
+/* On debug connector */
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
-&usbphy {
+/* Bluetooth */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
status = "okay";
};
+/* On Pi-2 connector, RTS/CTS optional */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector, RTS/CTS optional */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+ status = "disabled";
+};
+
+/* On Pi-2 connector (labeled for SPI1), RTS/CTS optional */
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins>;
+ status = "disabled";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usbphy {
+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
+ usb0_vbus-supply = <®_drivevbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ *
+ * Copyright (c) 2018 ARM Ltd.
+ */
+
+#include "sun50i-a64-sopine-baseboard.dts"
+
+/ {
+ model = "Pine64 LTS";
+ compatible = "pine64,pine64-lts", "allwinner,sun50i-r18",
+ "allwinner,sun50i-a64";
+};
chosen {
stdout-path = "serial0:115200n8";
};
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+};
+
+&de {
+ status = "okay";
};
&ehci0 {
};
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
/* On Exp and Euler connectors */
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_dcdc1>;
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
disable-wp;
bus-width = <4>;
status = "okay";
&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
+ pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
vmmc-supply = <®_dcdc1>;
vqmmc-supply = <®_eldo1>;
bus-width = <8>;
&r_i2c {
clock-frequency = <100000>;
pinctrl-names = "default";
- pinctrl-0 = <&r_i2c_pins_a>;
+ pinctrl-0 = <&r_i2c_pl89_pins>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
stdout-path = "serial0:115200n8";
};
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
reg_vcc1v8: vcc1v8 {
compatible = "regulator-fixed";
regulator-name = "vcc1v8";
};
};
+&de {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
status = "okay";
};
+&hdmi {
+ hvcc-supply = <®_dldo1>;
+ status = "okay";
+};
+
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&mdio {
ext_rgmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
+ pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
device_type = "cpu";
reg = <0>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu1: cpu@1 {
device_type = "cpu";
reg = <1>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu2: cpu@2 {
device_type = "cpu";
reg = <2>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
cpu3: cpu@3 {
device_type = "cpu";
reg = <3>;
enable-method = "psci";
+ next-level-cache = <&L2>;
};
+
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
+ };
+ };
+
+ de: display-engine {
+ compatible = "allwinner,sun50i-a64-display-engine";
+ allwinner,pipelines = <&mixer0>,
+ <&mixer1>;
+ status = "disabled";
};
osc24M: osc24M_clk {
#clock-cells = <1>;
#reset-cells = <1>;
};
+
+ mixer0: mixer@100000 {
+ compatible = "allwinner,sun50i-a64-de2-mixer-0";
+ reg = <0x100000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER0>,
+ <&display_clocks CLK_MIXER0>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer0_out: port@1 {
+ reg = <1>;
+
+ mixer0_out_tcon0: endpoint {
+ remote-endpoint = <&tcon0_in_mixer0>;
+ };
+ };
+ };
+ };
+
+ mixer1: mixer@200000 {
+ compatible = "allwinner,sun50i-a64-de2-mixer-1";
+ reg = <0x200000 0x100000>;
+ clocks = <&display_clocks CLK_BUS_MIXER1>,
+ <&display_clocks CLK_MIXER1>;
+ clock-names = "bus",
+ "mod";
+ resets = <&display_clocks RST_MIXER1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mixer1_out: port@1 {
+ reg = <1>;
+
+ mixer1_out_tcon1: endpoint {
+ remote-endpoint = <&tcon1_in_mixer1>;
+ };
+ };
+ };
+ };
};
syscon: syscon@1c00000 {
#dma-cells = <1>;
};
+ tcon0: lcd-controller@1c0c000 {
+ compatible = "allwinner,sun50i-a64-tcon-lcd",
+ "allwinner,sun8i-a83t-tcon-lcd";
+ reg = <0x01c0c000 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON0>, <&ccu CLK_TCON0>;
+ clock-names = "ahb", "tcon-ch0";
+ clock-output-names = "tcon-pixel-clock";
+ resets = <&ccu RST_BUS_TCON0>, <&ccu RST_BUS_LVDS>;
+ reset-names = "lcd", "lvds";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_mixer0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&mixer0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ tcon1: lcd-controller@1c0d000 {
+ compatible = "allwinner,sun50i-a64-tcon-tv",
+ "allwinner,sun8i-a83t-tcon-tv";
+ reg = <0x01c0d000 0x1000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_TCON1>, <&ccu CLK_TCON1>;
+ clock-names = "ahb", "tcon-ch1";
+ resets = <&ccu RST_BUS_TCON1>;
+ reset-names = "lcd";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ reg = <0>;
+
+ tcon1_in_mixer1: endpoint {
+ remote-endpoint = <&mixer1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ tcon1_out_hdmi: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&hdmi_in_tcon1>;
+ };
+ };
+ };
+ };
+
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun50i-a64-mmc";
reg = <0x01c0f000 0x1000>;
#size-cells = <0>;
};
+ sid: eeprom@1c14000 {
+ compatible = "allwinner,sun50i-a64-sid";
+ reg = <0x1c14000 0x400>;
+ };
+
usb_otg: usb@1c19000 {
compatible = "allwinner,sun8i-a33-musb";
reg = <0x01c19000 0x0400>;
};
mmc2_pins: mmc2-pins {
- pins = "PC1", "PC5", "PC6", "PC8", "PC9",
+ pins = "PC5", "PC6", "PC8", "PC9",
"PC10","PC11", "PC12", "PC13",
"PC14", "PC15", "PC16";
function = "mmc2";
bias-pull-up;
};
+ mmc2_ds_pin: mmc2-ds-pin {
+ pins = "PC1";
+ function = "mmc2";
+ drive-strength = <30>;
+ bias-pull-up;
+ };
+
pwm_pin: pwm_pin {
pins = "PD22";
function = "pwm";
function = "spi1";
};
- uart0_pins_a: uart0 {
+ uart0_pb_pins: uart0-pb-pins {
pins = "PB8", "PB9";
function = "uart0";
};
status = "disabled";
};
+ hdmi: hdmi@1ee0000 {
+ compatible = "allwinner,sun50i-a64-dw-hdmi",
+ "allwinner,sun8i-a83t-dw-hdmi";
+ reg = <0x01ee0000 0x10000>;
+ reg-io-width = <1>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+ <&ccu CLK_HDMI>;
+ clock-names = "iahb", "isfr", "tmds";
+ resets = <&ccu RST_BUS_HDMI1>;
+ reset-names = "ctrl";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi-phy";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+
+ hdmi_in_tcon1: endpoint {
+ remote-endpoint = <&tcon1_out_hdmi>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ hdmi_phy: hdmi-phy@1ef0000 {
+ compatible = "allwinner,sun50i-a64-hdmi-phy";
+ reg = <0x01ef0000 0x10000>;
+ clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_DDC>,
+ <&ccu 7>;
+ clock-names = "bus", "mod", "pll-0";
+ resets = <&ccu RST_BUS_HDMI0>;
+ reset-names = "phy";
+ #phy-cells = <0>;
+ };
+
rtc: rtc@1f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
interrupt-controller;
#interrupt-cells = <3>;
- r_i2c_pins_a: i2c-a {
+ r_i2c_pl89_pins: r-i2c-pl89-pins {
pins = "PL8", "PL9";
function = "s_i2c";
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
+
+/ {
+ model = "Banana Pi BPI-M2-Plus v1.2 H5";
+ compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun50i-h5";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org>
+
+/dts-v1/;
+#include "sun50i-h5.dtsi"
+#include <arm/sunxi-bananapi-m2-plus.dtsi>
+
+/ {
+ model = "Banana Pi BPI-M2-Plus H5";
+ compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5";
+};
<GIC_PPI 10
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+
+ soc {
+ mali: gpu@1e80000 {
+ compatible = "allwinner,sun50i-h5-mali", "arm,mali-450";
+ reg = <0x01e80000 0x30000>;
+ /*
+ * While the datasheet lists an interrupt for the
+ * PMU, the actual silicon does not have the PMU
+ * block. Reads all return zero, and writes are
+ * ignored.
+ */
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp",
+ "gpmmu",
+ "pp",
+ "pp0",
+ "ppmmu0",
+ "pp1",
+ "ppmmu1",
+ "pp2",
+ "ppmmu2",
+ "pp3",
+ "ppmmu3",
+ "pmu";
+ clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
+ clock-names = "bus", "core";
+ resets = <&ccu RST_BUS_GPU>;
+
+ assigned-clocks = <&ccu CLK_GPU>;
+ assigned-clock-rates = <384000000>;
+ };
+ };
};
&ccu {
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "OrangePi One Plus";
+ compatible = "xunlong,orangepi-one-plus", "allwinner,sun50i-h6";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>;
+ vmmc-supply = <®_cldo1>;
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&r_i2c {
+ status = "okay";
+
+ axp805: pmic@36 {
+ compatible = "x-powers,axp805", "x-powers,axp806";
+ reg = <0x36>;
+ interrupt-parent = <&r_intc>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ x-powers,self-working-mode;
+
+ regulators {
+ reg_aldo1: aldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-pl";
+ };
+
+ reg_aldo2: aldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-ac200";
+ };
+
+ reg_aldo3: aldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc25-dram";
+ };
+
+ reg_bldo1: bldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-bias-pll";
+ };
+
+ reg_bldo2: bldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-efuse-pcie-hdmi-io";
+ };
+
+ reg_bldo3: bldo3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-name = "vcc-dcxoio";
+ };
+
+ bldo4 {
+ /* unused */
+ };
+
+ reg_cldo1: cldo1 {
+ regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-3v3";
+ };
+
+ reg_cldo2: cldo2 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-1";
+ };
+
+ reg_cldo3: cldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi-2";
+ };
+
+ reg_dcdca: dcdca {
+ regulator-always-on;
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ reg_dcdcc: dcdcc {
+ regulator-min-microvolt = <810000>;
+ regulator-max-microvolt = <1080000>;
+ regulator-name = "vdd-gpu";
+ };
+
+ reg_dcdcd: dcdcd {
+ regulator-always-on;
+ regulator-min-microvolt = <960000>;
+ regulator-max-microvolt = <960000>;
+ regulator-name = "vdd-sys";
+ };
+
+ reg_dcdce: dcdce {
+ regulator-always-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vcc-dram";
+ };
+
+ sw {
+ /* unused */
+ };
+ };
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_ph_pins>;
+ status = "okay";
+};
#size-cells = <1>;
ranges;
+ syscon: syscon@3000000 {
+ compatible = "allwinner,sun50i-h6-system-control",
+ "allwinner,sun50i-a64-system-control";
+ reg = <0x03000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sram_c: sram@28000 {
+ compatible = "mmio-sram";
+ reg = <0x00028000 0x1e000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x00028000 0x1e000>;
+
+ de2_sram: sram-section@0 {
+ compatible = "allwinner,sun50i-h6-sram-c",
+ "allwinner,sun50i-a64-sram-c";
+ reg = <0x0000 0x1e000>;
+ };
+ };
+ };
+
ccu: clock@3001000 {
compatible = "allwinner,sun50i-h6-ccu";
reg = <0x03001000 0x1000>;
sysmgr: sysmgr@ffd12000 {
compatible = "altr,sys-mgr", "syscon";
- reg = <0xffd12000 0x1000>;
+ reg = <0xffd12000 0x228>;
};
/* Local timer */
aliases {
serial0 = &uart0;
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
};
chosen {
&i2c1 {
status = "okay";
clock-frequency = <100000>;
+ i2c-sda-falling-time-ns = <890>; /* hcnt */
+ i2c-sdl-falling-time-ns = <890>; /* lcnt */
adc@14 {
compatible = "lltc,ltc2497";
clock-names = "uartclk", "apb_pclk";
};
- spi0: ssp@e1020000 {
+ spi0: spi@e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
reg = <0 0xe1020000 0 0x1000>;
clock-names = "apb_pclk";
};
- spi1: ssp@e1030000 {
+ spi1: spi@e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
reg = <0 0xe1030000 0 0x1000>;
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
serial1 = &uart_A;
};
+ linein: audio-codec@0 {
+ #sound-dai-cells = <0>;
+ compatible = "everest,es7241";
+ VDDA-supply = <&vcc_3v3>;
+ VDDP-supply = <&vcc_3v3>;
+ VDDD-supply = <&vcc_3v3>;
+ status = "okay";
+ sound-name-prefix = "Linein";
+ };
+
+ lineout: audio-codec@1 {
+ #sound-dai-cells = <0>;
+ compatible = "everest,es7154";
+ VDD-supply = <&vcc_3v3>;
+ PVDD-supply = <&vcc_5v>;
+ status = "okay";
+ sound-name-prefix = "Lineout";
+ };
+
+ spdif_dit: audio-codec@2 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ status = "okay";
+ sound-name-prefix = "DIT";
+ };
+
+ dmics: audio-codec@3 {
+ #sound-dai-cells = <0>;
+ compatible = "dmic-codec";
+ num-channels = <7>;
+ wakeup-delay-ms = <50>;
+ status = "okay";
+ sound-name-prefix = "MIC";
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
main_12v: regulator-main_12v {
compatible = "regulator-fixed";
regulator-name = "12V";
regulator-always-on;
};
- vddio_boot: regulator-vddio_boot {
+ vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
- regulator-name = "VDDIO_BOOT";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-always-on;
};
- vcc_3v3: regulator-vcc_3v3 {
+ vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
usb_pwr: regulator-usb_pwr {
compatible = "regulator-fixed";
regulator-name = "USB_PWR";
enable-active-high;
};
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
- };
-
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
clock-names = "ext_clock";
};
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
- };
-
speaker-leds {
compatible = "gpio-leds";
};
};
- linein: audio-codec@0 {
- #sound-dai-cells = <0>;
- compatible = "everest,es7241";
- VDDA-supply = <&vcc_3v3>;
- VDDP-supply = <&vcc_3v3>;
- VDDD-supply = <&vcc_3v3>;
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "AXG-S400";
+ audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
+ <&tdmin_lb>, <&tdmout_c>;
+ audio-widgets = "Line", "Lineout",
+ "Line", "Linein",
+ "Speaker", "Speaker1 Left",
+ "Speaker", "Speaker1 Right";
+ audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "TDMOUT_C IN 1", "FRDDR_B OUT 2",
+ "SPDIFOUT IN 1", "FRDDR_B OUT 3",
+ "TDMOUT_C IN 2", "FRDDR_C OUT 2",
+ "SPDIFOUT IN 2", "FRDDR_C OUT 3",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TDMIN_B IN 2", "TDM_C Capture",
+ "TDMIN_B IN 5", "TDM_C Loopback",
+ "TDMIN_C IN 2", "TDM_C Capture",
+ "TDMIN_C IN 5", "TDM_C Loopback",
+ "TDMIN_LB IN 2", "TDM_C Loopback",
+ "TDMIN_LB IN 5", "TDM_C Capture",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "TODDR_B IN 0", "TDMIN_A OUT",
+ "TODDR_C IN 0", "TDMIN_A OUT",
+ "TODDR_A IN 1", "TDMIN_B OUT",
+ "TODDR_B IN 1", "TDMIN_B OUT",
+ "TODDR_C IN 1", "TDMIN_B OUT",
+ "TODDR_A IN 2", "TDMIN_C OUT",
+ "TODDR_B IN 2", "TDMIN_C OUT",
+ "TODDR_C IN 2", "TDMIN_C OUT",
+ "TODDR_A IN 4", "PDM Capture",
+ "TODDR_B IN 4", "PDM Capture",
+ "TODDR_C IN 4", "PDM Capture",
+ "TODDR_A IN 6", "TDMIN_LB OUT",
+ "TODDR_B IN 6", "TDMIN_LB OUT",
+ "TODDR_C IN 6", "TDMIN_LB OUT",
+ "Lineout", "Lineout AOUTL",
+ "Lineout", "Lineout AOUTR",
+ "Speaker1 Left", "SPK1 OUT_A",
+ "Speaker1 Left", "SPK1 OUT_B",
+ "Speaker1 Right", "SPK1 OUT_C",
+ "Speaker1 Right", "SPK1 OUT_D",
+ "Linein AINL", "Linein",
+ "Linein AINR", "Linein";
+ assigned-clocks = <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <589824000>,
+ <270950400>,
+ <393216000>;
status = "okay";
- sound-name-prefix = "Linein";
- };
- lineout: audio-codec@1 {
- #sound-dai-cells = <0>;
- compatible = "everest,es7154";
- VDD-supply = <&vcc_3v3>;
- PVDD-supply = <&vcc_5v>;
- status = "okay";
- sound-name-prefix = "Lineout";
+ dai-link@0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link@1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link@2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ dai-link@3 {
+ sound-dai = <&toddr_a>;
+ };
+
+ dai-link@4 {
+ sound-dai = <&toddr_b>;
+ };
+
+ dai-link@5 {
+ sound-dai = <&toddr_c>;
+ };
+
+ dai-link@6 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec@0 {
+ sound-dai = <&lineout>;
+ };
+
+ codec@1 {
+ sound-dai = <&speaker_amp1>;
+ };
+
+ codec@2 {
+ sound-dai = <&linein>;
+ };
+
+ };
+
+ dai-link@7 {
+ sound-dai = <&spdifout>;
+
+ codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+
+ dai-link@8 {
+ sound-dai = <&pdm>;
+
+ codec {
+ sound-dai = <&dmics>;
+ };
+ };
};
- spdif_dit: audio-codec@2 {
- #sound-dai-cells = <0>;
- compatible = "linux,spdif-dit";
- status = "okay";
- sound-name-prefix = "DIT";
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
};
};
};
};
-&uart_A {
+&frddr_a {
status = "okay";
- pinctrl-0 = <&uart_a_pins>;
- pinctrl-names = "default";
};
-&uart_AO {
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
status = "okay";
- pinctrl-0 = <&uart_ao_a_pins>;
- pinctrl-names = "default";
};
&ir {
PVDD_B-supply = <&main_12v>;
PVDD_C-supply = <&main_12v>;
PVDD_D-supply = <&main_12v>;
+ sound-name-prefix = "SPK1";
};
};
};
};
+&pdm {
+ pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>,
+ <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&pwm_ab {
status = "okay";
pinctrl-0 = <&pwm_a_x20_pins>;
pinctrl-names = "default";
};
-/* emmc storage */
-&sd_emmc_c {
+&saradc {
status = "okay";
- pinctrl-0 = <&emmc_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <180000000>;
- non-removable;
- disable-wp;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
-
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&vddio_boot>;
+ vref-supply = <&vddio_ao18>;
};
/* wifi module */
};
};
-&saradc {
+/* emmc storage */
+&sd_emmc_c {
+ status = "disabled";
+ pinctrl-0 = <&emmc_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <180000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+&spdifout {
+ pinctrl-0 = <&spdif_out_a20_pins>;
+ pinctrl-names = "default";
status = "okay";
- vref-supply = <&vddio_ao18>;
+};
+
+&tdmif_a {
+ pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>,
+ <&tdma_din0_pins>, <&tdma_dout0_x15_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmif_b {
+ pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>,
+ <&tdmb_din3_pins>, <&mclk_b_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmif_c {
+ pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>,
+ <&tdmc_din1_pins>, <&tdmc_dout2_pins>,
+ <&mclk_c_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&tdmin_a {
+ status = "okay";
+};
+
+&tdmin_b {
+ status = "okay";
+};
+
+&tdmin_c {
+ status = "okay";
+};
+
+&tdmin_lb {
+ status = "okay";
+};
+
+&tdmout_c {
+ status = "okay";
+};
+
+&toddr_a {
+ status = "okay";
+};
+
+&toddr_b {
+ status = "okay";
+};
+
+&toddr_c {
+ status = "okay";
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>;
+ pinctrl-names = "default";
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
};
* Copyright (c) 2017 Amlogic, Inc. All rights reserved.
*/
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axg-aoclkc.h>
#include <dt-bindings/clock/axg-audio-clkc.h>
#include <dt-bindings/clock/axg-clkc.h>
-#include <dt-bindings/clock/axg-aoclkc.h>
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-axg-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
/ {
#address-cells = <2>;
#size-cells = <2>;
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ tdmif_a: audio-controller@0 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_A";
+ clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
- /* 16 MiB reserved for Hardware ROM Firmware */
- hwrom_reserved: hwrom@0 {
- reg = <0x0 0x0 0x0 0x1000000>;
- no-map;
- };
+ tdmif_b: audio-controller@1 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_B";
+ clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
- /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved: secmon@5000000 {
- reg = <0x0 0x05000000 0x0 0x300000>;
- no-map;
- };
+ tdmif_c: audio-controller@2 {
+ compatible = "amlogic,axg-tdm-iface";
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TDM_C";
+ clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
+ <&clkc_audio AUD_CLKID_MST_C_SCLK>,
+ <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
+ clock-names = "mclk", "sclk", "lrclk";
+ status = "disabled";
+ };
+
+ ao_alt_xtal: ao_alt_xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <32000000>;
+ clock-output-names = "ao_alt_xtal";
+ #clock-cells = <0>;
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
cpus {
};
};
- arm-pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
- tdmif_a: audio-controller@0 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_A";
- clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
- <&clkc_audio AUD_CLKID_MST_A_SCLK>,
- <&clkc_audio AUD_CLKID_MST_A_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_b: audio-controller@1 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_B";
- clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
- <&clkc_audio AUD_CLKID_MST_B_SCLK>,
- <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- tdmif_c: audio-controller@2 {
- compatible = "amlogic,axg-tdm-iface";
- #sound-dai-cells = <0>;
- sound-name-prefix = "TDM_C";
- clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
- <&clkc_audio AUD_CLKID_MST_C_SCLK>,
- <&clkc_audio AUD_CLKID_MST_C_LRCLK>;
- clock-names = "mclk", "sclk", "lrclk";
- status = "disabled";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10
- (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
- };
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- xtal: xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
+ /* 16 MiB reserved for Hardware ROM Firmware */
+ hwrom_reserved: hwrom@0 {
+ reg = <0x0 0x0 0x0 0x1000000>;
+ no-map;
+ };
- ao_alt_xtal: ao_alt_xtal-clk {
- compatible = "fixed-clock";
- clock-frequency = <32000000>;
- clock-output-names = "ao_alt_xtal";
- #clock-cells = <0>;
+ /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
};
soc {
#size-cells = <2>;
ranges;
- apb: apb@ffe00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffe00000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
-
- sd_emmc_b: sd@5000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x5000 0x0 0x800>;
- interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_B>,
- <&clkc CLKID_SD_EMMC_B_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_B>;
- };
+ ethmac: ethernet@ff3f0000 {
+ compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
+ reg = <0x0 0xff3f0000 0x0 0x10000
+ 0x0 0xff634540 0x0 0x8>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "macirq";
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ status = "disabled";
+ };
- sd_emmc_c: mmc@7000 {
- compatible = "amlogic,meson-axg-mmc";
- reg = <0x0 0x7000 0x0 0x800>;
- interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&clkc CLKID_SD_EMMC_C>,
- <&clkc CLKID_SD_EMMC_C_CLK0>,
- <&clkc CLKID_FCLK_DIV2>;
- clock-names = "core", "clkin0", "clkin1";
- resets = <&reset RESET_SD_EMMC_C>;
- };
+ pdm: audio-controller@ff632000 {
+ compatible = "amlogic,axg-pdm";
+ reg = <0x0 0xff632000 0x0 0x34>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "PDM";
+ clocks = <&clkc_audio AUD_CLKID_PDM>,
+ <&clkc_audio AUD_CLKID_PDM_DCLK>,
+ <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
+ clock-names = "pclk", "dclk", "sysclk";
+ status = "disabled";
};
- audio: bus@ff642000 {
+ periphs: bus@ff634000 {
compatible = "simple-bus";
- reg = <0x0 0xff642000 0x0 0x2000>;
+ reg = <0x0 0xff634000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
-
- clkc_audio: clock-controller@0 {
- compatible = "amlogic,axg-audio-clkc";
- reg = <0x0 0x0 0x0 0xb4>;
- #clock-cells = <1>;
-
- clocks = <&clkc CLKID_AUDIO>,
- <&clkc CLKID_MPLL0>,
- <&clkc CLKID_MPLL1>,
- <&clkc CLKID_MPLL2>,
- <&clkc CLKID_MPLL3>,
- <&clkc CLKID_HIFI_PLL>,
- <&clkc CLKID_FCLK_DIV3>,
- <&clkc CLKID_FCLK_DIV4>,
- <&clkc CLKID_GP0_PLL>;
- clock-names = "pclk",
- "mst_in0",
- "mst_in1",
- "mst_in2",
- "mst_in3",
- "mst_in4",
- "mst_in5",
- "mst_in6",
- "mst_in7";
+ ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
- resets = <&reset RESET_AUDIO>;
+ hwrng: rng@18 {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x18 0x0 0x4>;
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
};
- arb: reset-controller@280 {
- compatible = "amlogic,meson-axg-audio-arb";
- reg = <0x0 0x280 0x0 0x4>;
- #reset-cells = <1>;
- clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
- };
+ pinctrl_periphs: pinctrl@480 {
+ compatible = "amlogic,meson-axg-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- tdmin_a: audio-controller@300 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x300 0x0 0x40>;
- sound-name-prefix = "TDMIN_A";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
+ gpio: bank@480 {
+ reg = <0x0 0x00480 0x0 0x40>,
+ <0x0 0x004e8 0x0 0x14>,
+ <0x0 0x00520 0x0 0x14>,
+ <0x0 0x00430 0x0 0x3c>;
+ reg-names = "mux", "pull", "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_periphs 0 0 86>;
+ };
- tdmin_b: audio-controller@340 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x340 0x0 0x40>;
- sound-name-prefix = "TDMIN_B";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_c: audio-controller@380 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x380 0x0 0x40>;
- sound-name-prefix = "TDMIN_C";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmin_lb: audio-controller@3c0 {
- compatible = "amlogic,axg-tdmin";
- reg = <0x0 0x3c0 0x0 0x40>;
- sound-name-prefix = "TDMIN_LB";
- clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- spdifout: audio-controller@480 {
- compatible = "amlogic,axg-spdifout";
- reg = <0x0 0x480 0x0 0x50>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "SPDIFOUT";
- clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
- <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
- clock-names = "pclk", "mclk";
- status = "disabled";
- };
-
- tdmout_a: audio-controller@500 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x500 0x0 0x40>;
- sound-name-prefix = "TDMOUT_A";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_b: audio-controller@540 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x540 0x0 0x40>;
- sound-name-prefix = "TDMOUT_B";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
-
- tdmout_c: audio-controller@580 {
- compatible = "amlogic,axg-tdmout";
- reg = <0x0 0x580 0x0 0x40>;
- sound-name-prefix = "TDMOUT_C";
- clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
- <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
- clock-names = "pclk", "sclk", "sclk_sel",
- "lrclk", "lrclk_sel";
- status = "disabled";
- };
- };
-
- cbus: bus@ffd00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x25000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
-
- gpio_intc: interrupt-controller@f080 {
- compatible = "amlogic,meson-gpio-intc";
- reg = <0x0 0xf080 0x0 0x10>;
- interrupt-controller;
- #interrupt-cells = <2>;
- amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
- status = "disabled";
- };
-
- pwm_ab: pwm@1b000 {
- compatible = "amlogic,meson-axg-ee-pwm";
- reg = <0x0 0x1b000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_cd: pwm@1a000 {
- compatible = "amlogic,meson-axg-ee-pwm";
- reg = <0x0 0x1a000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- reset: reset-controller@1004 {
- compatible = "amlogic,meson-axg-reset";
- reg = <0x0 0x01004 0x0 0x9c>;
- #reset-cells = <1>;
- };
-
- spicc0: spi@13000 {
- compatible = "amlogic,meson-axg-spicc";
- reg = <0x0 0x13000 0x0 0x3c>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC0>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spicc1: spi@15000 {
- compatible = "amlogic,meson-axg-spicc";
- reg = <0x0 0x15000 0x0 0x3c>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clkc CLKID_SPICC1>;
- clock-names = "core";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c0: i2c@1f000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1f000 0x0 0x20>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c1: i2c@1e000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1e000 0x0 0x20>;
- interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@1d000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1d000 0x0 0x20>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@1c000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x1c000 0x0 0x20>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart_A: serial@24000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x24000 0x0 0x18>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- };
-
- uart_B: serial@23000 {
- compatible = "amlogic,meson-gx-uart";
- reg = <0x0 0x23000 0x0 0x18>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- };
- };
-
- ethmac: ethernet@ff3f0000 {
- compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
- reg = <0x0 0xff3f0000 0x0 0x10000
- 0x0 0xff634540 0x0 0x8>;
- interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "macirq";
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
- status = "disabled";
- };
-
- gic: interrupt-controller@ffc01000 {
- compatible = "arm,gic-400";
- reg = <0x0 0xffc01000 0 0x1000>,
- <0x0 0xffc02000 0 0x2000>,
- <0x0 0xffc04000 0 0x2000>,
- <0x0 0xffc06000 0 0x2000>;
- interrupt-controller;
- interrupts = <GIC_PPI 9
- (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- #address-cells = <0>;
- };
-
- hiubus: bus@ff63c000 {
- compatible = "simple-bus";
- reg = <0x0 0xff63c000 0x0 0x1c00>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ i2c0_pins: i2c0 {
+ mux {
+ groups = "i2c0_sck",
+ "i2c0_sda";
+ function = "i2c0";
+ };
+ };
- sysctrl: system-controller@0 {
- compatible = "amlogic,meson-axg-hhi-sysctrl", "syscon", "simple-mfd";
- reg = <0 0 0 0x400>;
+ i2c1_x_pins: i2c1_x {
+ mux {
+ groups = "i2c1_sck_x",
+ "i2c1_sda_x";
+ function = "i2c1";
+ };
+ };
- clkc: clock-controller {
- compatible = "amlogic,axg-clkc";
- #clock-cells = <1>;
+ i2c1_z_pins: i2c1_z {
+ mux {
+ groups = "i2c1_sck_z",
+ "i2c1_sda_z";
+ function = "i2c1";
+ };
};
- };
- };
- mailbox: mailbox@ff63dc00 {
- compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
- reg = <0 0xff63dc00 0 0x400>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
- <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
- #mbox-cells = <1>;
- };
+ i2c2_a_pins: i2c2_a {
+ mux {
+ groups = "i2c2_sck_a",
+ "i2c2_sda_a";
+ function = "i2c2";
+ };
+ };
- periphs: periphs@ff634000 {
- compatible = "simple-bus";
- reg = <0x0 0xff634000 0x0 0x2000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+ i2c2_x_pins: i2c2_x {
+ mux {
+ groups = "i2c2_sck_x",
+ "i2c2_sda_x";
+ function = "i2c2";
+ };
+ };
- hwrng: rng {
- compatible = "amlogic,meson-rng";
- reg = <0x0 0x18 0x0 0x4>;
- clocks = <&clkc CLKID_RNG0>;
- clock-names = "core";
- };
+ i2c3_a6_pins: i2c3_a6 {
+ mux {
+ groups = "i2c3_sda_a6",
+ "i2c3_sck_a7";
+ function = "i2c3";
+ };
+ };
- pinctrl_periphs: pinctrl@480 {
- compatible = "amlogic,meson-axg-periphs-pinctrl";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ i2c3_a12_pins: i2c3_a12 {
+ mux {
+ groups = "i2c3_sda_a12",
+ "i2c3_sck_a13";
+ function = "i2c3";
+ };
+ };
- gpio: bank@480 {
- reg = <0x0 0x00480 0x0 0x40>,
- <0x0 0x004e8 0x0 0x14>,
- <0x0 0x00520 0x0 0x14>,
- <0x0 0x00430 0x0 0x3c>;
- reg-names = "mux", "pull", "pull-enable", "gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_periphs 0 0 86>;
+ i2c3_a19_pins: i2c3_a19 {
+ mux {
+ groups = "i2c3_sda_a19",
+ "i2c3_sck_a20";
+ function = "i2c3";
+ };
};
emmc_pins: emmc {
mux {
groups = "emmc_nand_d0",
- "emmc_nand_d1",
- "emmc_nand_d2",
- "emmc_nand_d3",
- "emmc_nand_d4",
- "emmc_nand_d5",
- "emmc_nand_d6",
- "emmc_nand_d7",
- "emmc_clk",
- "emmc_cmd",
- "emmc_ds";
+ "emmc_nand_d1",
+ "emmc_nand_d2",
+ "emmc_nand_d3",
+ "emmc_nand_d4",
+ "emmc_nand_d5",
+ "emmc_nand_d6",
+ "emmc_nand_d7",
+ "emmc_clk",
+ "emmc_cmd",
+ "emmc_ds";
function = "emmc";
};
};
};
};
- sdio_pins: sdio {
+ eth_rgmii_x_pins: eth-x-rgmii {
mux {
- groups = "sdio_d0",
- "sdio_d1",
- "sdio_d2",
- "sdio_d3",
- "sdio_cmd",
- "sdio_clk";
- function = "sdio";
+ groups = "eth_mdio_x",
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
};
};
- sdio_clk_gate_pins: sdio_clk_gate {
+ eth_rgmii_y_pins: eth-y-rgmii {
mux {
- groups = "GPIOX_4";
- function = "gpio_periphs";
- };
- cfg-pull-down {
- pins = "GPIOX_4";
- bias-pull-down;
+ groups = "eth_mdio_y",
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
};
};
eth_rmii_x_pins: eth-x-rmii {
mux {
groups = "eth_mdio_x",
- "eth_mdc_x",
- "eth_rgmii_rx_clk_x",
- "eth_rx_dv_x",
- "eth_rxd0_x",
- "eth_rxd1_x",
- "eth_txen_x",
- "eth_txd0_x",
- "eth_txd1_x";
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x";
function = "eth";
};
};
eth_rmii_y_pins: eth-y-rmii {
mux {
groups = "eth_mdio_y",
- "eth_mdc_y",
- "eth_rgmii_rx_clk_y",
- "eth_rx_dv_y",
- "eth_rxd0_y",
- "eth_rxd1_y",
- "eth_txen_y",
- "eth_txd0_y",
- "eth_txd1_y";
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y";
function = "eth";
};
};
- eth_rgmii_x_pins: eth-x-rgmii {
+ mclk_b_pins: mclk_b {
mux {
- groups = "eth_mdio_x",
- "eth_mdc_x",
- "eth_rgmii_rx_clk_x",
- "eth_rx_dv_x",
- "eth_rxd0_x",
- "eth_rxd1_x",
- "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txen_x",
- "eth_txd0_x",
- "eth_txd1_x",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
+ groups = "mclk_b";
+ function = "mclk_b";
};
};
- eth_rgmii_y_pins: eth-y-rgmii {
+ mclk_c_pins: mclk_c {
mux {
- groups = "eth_mdio_y",
- "eth_mdc_y",
- "eth_rgmii_rx_clk_y",
- "eth_rx_dv_y",
- "eth_rxd0_y",
- "eth_rxd1_y",
- "eth_rxd2_rgmii",
- "eth_rxd3_rgmii",
- "eth_rgmii_tx_clk",
- "eth_txen_y",
- "eth_txd0_y",
- "eth_txd1_y",
- "eth_txd2_rgmii",
- "eth_txd3_rgmii";
- function = "eth";
+ groups = "mclk_c";
+ function = "mclk_c";
};
};
};
};
+ sdio_pins: sdio {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_cmd",
+ "sdio_clk";
+ function = "sdio";
+ };
+ };
+
+ sdio_clk_gate_pins: sdio_clk_gate {
+ mux {
+ groups = "GPIOX_4";
+ function = "gpio_periphs";
+ };
+ cfg-pull-down {
+ pins = "GPIOX_4";
+ bias-pull-down;
+ };
+ };
+
spdif_in_z_pins: spdif_in_z {
mux {
groups = "spdif_in_z";
};
};
- spdif_out_z_pins: spdif_out_z {
- mux {
- groups = "spdif_out_z";
- function = "spdif_out";
- };
- };
-
spdif_out_a1_pins: spdif_out_a1 {
mux {
groups = "spdif_out_a1";
};
};
+ spdif_out_z_pins: spdif_out_z {
+ mux {
+ groups = "spdif_out_z";
+ function = "spdif_out";
+ };
+ };
+
spi0_pins: spi0 {
mux {
groups = "spi0_miso",
- "spi0_mosi",
- "spi0_clk";
+ "spi0_mosi",
+ "spi0_clk";
function = "spi0";
};
};
};
};
-
spi1_a_pins: spi1_a {
mux {
groups = "spi1_miso_a",
- "spi1_mosi_a",
- "spi1_clk_a";
+ "spi1_mosi_a",
+ "spi1_clk_a";
function = "spi1";
};
};
spi1_x_pins: spi1_x {
mux {
groups = "spi1_miso_x",
- "spi1_mosi_x",
- "spi1_clk_x";
+ "spi1_mosi_x",
+ "spi1_clk_x";
function = "spi1";
};
};
};
};
- i2c0_pins: i2c0 {
- mux {
- groups = "i2c0_sck",
- "i2c0_sda";
- function = "i2c0";
- };
- };
-
- i2c1_z_pins: i2c1_z {
- mux {
- groups = "i2c1_sck_z",
- "i2c1_sda_z";
- function = "i2c1";
- };
- };
-
- i2c1_x_pins: i2c1_x {
- mux {
- groups = "i2c1_sck_x",
- "i2c1_sda_x";
- function = "i2c1";
- };
- };
-
- i2c2_x_pins: i2c2_x {
- mux {
- groups = "i2c2_sck_x",
- "i2c2_sda_x";
- function = "i2c2";
- };
- };
-
- i2c2_a_pins: i2c2_a {
- mux {
- groups = "i2c2_sck_a",
- "i2c2_sda_a";
- function = "i2c2";
- };
- };
-
- i2c3_a6_pins: i2c3_a6 {
- mux {
- groups = "i2c3_sda_a6",
- "i2c3_sck_a7";
- function = "i2c3";
- };
- };
-
- i2c3_a12_pins: i2c3_a12 {
- mux {
- groups = "i2c3_sda_a12",
- "i2c3_sck_a13";
- function = "i2c3";
- };
- };
-
- i2c3_a19_pins: i2c3_a19 {
- mux {
- groups = "i2c3_sda_a19",
- "i2c3_sck_a20";
- function = "i2c3";
- };
- };
-
- uart_a_pins: uart_a {
- mux {
- groups = "uart_tx_a",
- "uart_rx_a";
- function = "uart_a";
- };
- };
-
- uart_a_cts_rts_pins: uart_a_cts_rts {
- mux {
- groups = "uart_cts_a",
- "uart_rts_a";
- function = "uart_a";
- };
- };
-
- uart_b_x_pins: uart_b_x {
- mux {
- groups = "uart_tx_b_x",
- "uart_rx_b_x";
- function = "uart_b";
- };
- };
-
- uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
+ tdma_din0_pins: tdma_din0 {
mux {
- groups = "uart_cts_b_x",
- "uart_rts_b_x";
- function = "uart_b";
+ groups = "tdma_din0";
+ function = "tdma";
};
};
- uart_b_z_pins: uart_b_z {
+ tdma_dout0_x14_pins: tdma_dout0_x14 {
mux {
- groups = "uart_tx_b_z",
- "uart_rx_b_z";
- function = "uart_b";
+ groups = "tdma_dout0_x14";
+ function = "tdma";
};
};
- uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
+ tdma_dout0_x15_pins: tdma_dout0_x15 {
mux {
- groups = "uart_cts_b_z",
- "uart_rts_b_z";
- function = "uart_b";
+ groups = "tdma_dout0_x15";
+ function = "tdma";
};
};
- uart_ao_b_z_pins: uart_ao_b_z {
+ tdma_dout1_pins: tdma_dout1 {
mux {
- groups = "uart_ao_tx_b_z",
- "uart_ao_rx_b_z";
- function = "uart_ao_b_z";
+ groups = "tdma_dout1";
+ function = "tdma";
};
};
- uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
+ tdma_din1_pins: tdma_din1 {
mux {
- groups = "uart_ao_cts_b_z",
- "uart_ao_rts_b_z";
- function = "uart_ao_b_z";
+ groups = "tdma_din1";
+ function = "tdma";
};
};
- mclk_b_pins: mclk_b {
+ tdma_fs_pins: tdma_fs {
mux {
- groups = "mclk_b";
- function = "mclk_b";
+ groups = "tdma_fs";
+ function = "tdma";
};
};
- mclk_c_pins: mclk_c {
+ tdma_fs_slv_pins: tdma_fs_slv {
mux {
- groups = "mclk_c";
- function = "mclk_c";
+ groups = "tdma_fs_slv";
+ function = "tdma";
};
};
};
};
- tdma_fs_pins: tdma_fs {
- mux {
- groups = "tdma_fs";
- function = "tdma";
- };
- };
-
- tdma_fs_slv_pins: tdma_fs_slv {
+ tdmb_din0_pins: tdmb_din0 {
mux {
- groups = "tdma_fs_slv";
- function = "tdma";
+ groups = "tdmb_din0";
+ function = "tdmb";
};
};
- tdma_din0_pins: tdma_din0 {
+ tdmb_din1_pins: tdmb_din1 {
mux {
- groups = "tdma_din0";
- function = "tdma";
+ groups = "tdmb_din1";
+ function = "tdmb";
};
};
- tdma_dout0_x14_pins: tdma_dout0_x14 {
+ tdmb_din2_pins: tdmb_din2 {
mux {
- groups = "tdma_dout0_x14";
- function = "tdma";
+ groups = "tdmb_din2";
+ function = "tdmb";
};
};
- tdma_dout0_x15_pins: tdma_dout0_x15 {
+ tdmb_din3_pins: tdmb_din3 {
mux {
- groups = "tdma_dout0_x15";
- function = "tdma";
+ groups = "tdmb_din3";
+ function = "tdmb";
};
};
- tdma_dout1_pins: tdma_dout1 {
+ tdmb_dout0_pins: tdmb_dout0 {
mux {
- groups = "tdma_dout1";
- function = "tdma";
+ groups = "tdmb_dout0";
+ function = "tdmb";
};
};
- tdma_din1_pins: tdma_din1 {
+ tdmb_dout1_pins: tdmb_dout1 {
mux {
- groups = "tdma_din1";
- function = "tdma";
+ groups = "tdmb_dout1";
+ function = "tdmb";
};
};
- tdmb_sclk_pins: tdmb_sclk {
+ tdmb_dout2_pins: tdmb_dout2 {
mux {
- groups = "tdmb_sclk";
+ groups = "tdmb_dout2";
function = "tdmb";
};
};
- tdmb_sclk_slv_pins: tdmb_sclk_slv {
+ tdmb_dout3_pins: tdmb_dout3 {
mux {
- groups = "tdmb_sclk_slv";
+ groups = "tdmb_dout3";
function = "tdmb";
};
};
};
};
- tdmb_din0_pins: tdmb_din0 {
+ tdmb_sclk_pins: tdmb_sclk {
mux {
- groups = "tdmb_din0";
+ groups = "tdmb_sclk";
function = "tdmb";
};
};
- tdmb_dout0_pins: tdmb_dout0 {
+ tdmb_sclk_slv_pins: tdmb_sclk_slv {
mux {
- groups = "tdmb_dout0";
+ groups = "tdmb_sclk_slv";
function = "tdmb";
};
};
- tdmb_din1_pins: tdmb_din1 {
+ tdmc_fs_pins: tdmc_fs {
mux {
- groups = "tdmb_din1";
- function = "tdmb";
+ groups = "tdmc_fs";
+ function = "tdmc";
};
};
- tdmb_dout1_pins: tdmb_dout1 {
+ tdmc_fs_slv_pins: tdmc_fs_slv {
mux {
- groups = "tdmb_dout1";
- function = "tdmb";
+ groups = "tdmc_fs_slv";
+ function = "tdmc";
};
};
- tdmb_din2_pins: tdmb_din2 {
+ tdmc_sclk_pins: tdmc_sclk {
mux {
- groups = "tdmb_din2";
- function = "tdmb";
+ groups = "tdmc_sclk";
+ function = "tdmc";
};
};
- tdmb_dout2_pins: tdmb_dout2 {
+ tdmc_sclk_slv_pins: tdmc_sclk_slv {
mux {
- groups = "tdmb_dout2";
- function = "tdmb";
+ groups = "tdmc_sclk_slv";
+ function = "tdmc";
};
};
- tdmb_din3_pins: tdmb_din3 {
+ tdmc_din0_pins: tdmc_din0 {
mux {
- groups = "tdmb_din3";
- function = "tdmb";
+ groups = "tdmc_din0";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_din1_pins: tdmc_din1 {
+ mux {
+ groups = "tdmc_din1";
+ function = "tdmc";
+ };
+ };
+
+ tdmc_din2_pins: tdmc_din2 {
+ mux {
+ groups = "tdmc_din2";
+ function = "tdmc";
};
};
- tdmb_dout3_pins: tdmb_dout3 {
+ tdmc_din3_pins: tdmc_din3 {
mux {
- groups = "tdmb_dout3";
- function = "tdmb";
+ groups = "tdmc_din3";
+ function = "tdmc";
};
};
- tdmc_sclk_pins: tdmc_sclk {
+ tdmc_dout0_pins: tdmc_dout0 {
mux {
- groups = "tdmc_sclk";
+ groups = "tdmc_dout0";
function = "tdmc";
};
};
- tdmc_sclk_slv_pins: tdmc_sclk_slv {
+ tdmc_dout1_pins: tdmc_dout1 {
mux {
- groups = "tdmc_sclk_slv";
+ groups = "tdmc_dout1";
function = "tdmc";
};
};
- tdmc_fs_pins: tdmc_fs {
+ tdmc_dout2_pins: tdmc_dout2 {
mux {
- groups = "tdmc_fs";
+ groups = "tdmc_dout2";
function = "tdmc";
};
};
- tdmc_fs_slv_pins: tdmc_fs_slv {
+ tdmc_dout3_pins: tdmc_dout3 {
mux {
- groups = "tdmc_fs_slv";
+ groups = "tdmc_dout3";
function = "tdmc";
};
};
- tdmc_din0_pins: tdmc_din0 {
+ uart_a_pins: uart_a {
mux {
- groups = "tdmc_din0";
- function = "tdmc";
+ groups = "uart_tx_a",
+ "uart_rx_a";
+ function = "uart_a";
};
};
- tdmc_dout0_pins: tdmc_dout0 {
+ uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
- groups = "tdmc_dout0";
- function = "tdmc";
+ groups = "uart_cts_a",
+ "uart_rts_a";
+ function = "uart_a";
};
};
- tdmc_din1_pins: tdmc_din1 {
+ uart_b_x_pins: uart_b_x {
mux {
- groups = "tdmc_din1";
- function = "tdmc";
+ groups = "uart_tx_b_x",
+ "uart_rx_b_x";
+ function = "uart_b";
};
};
- tdmc_dout1_pins: tdmc_dout1 {
+ uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
mux {
- groups = "tdmc_dout1";
- function = "tdmc";
+ groups = "uart_cts_b_x",
+ "uart_rts_b_x";
+ function = "uart_b";
};
};
- tdmc_din2_pins: tdmc_din2 {
+ uart_b_z_pins: uart_b_z {
mux {
- groups = "tdmc_din2";
- function = "tdmc";
+ groups = "uart_tx_b_z",
+ "uart_rx_b_z";
+ function = "uart_b";
};
};
- tdmc_dout2_pins: tdmc_dout2 {
+ uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
mux {
- groups = "tdmc_dout2";
- function = "tdmc";
+ groups = "uart_cts_b_z",
+ "uart_rts_b_z";
+ function = "uart_b";
};
};
- tdmc_din3_pins: tdmc_din3 {
+ uart_ao_b_z_pins: uart_ao_b_z {
mux {
- groups = "tdmc_din3";
- function = "tdmc";
+ groups = "uart_ao_tx_b_z",
+ "uart_ao_rx_b_z";
+ function = "uart_ao_b_z";
};
};
- tdmc_dout3_pins: tdmc_dout3 {
+ uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
mux {
- groups = "tdmc_dout3";
- function = "tdmc";
+ groups = "uart_ao_cts_b_z",
+ "uart_ao_rts_b_z";
+ function = "uart_ao_b_z";
};
};
};
};
- sram: sram@fffc0000 {
- compatible = "amlogic,meson-axg-sram", "mmio-sram";
- reg = <0x0 0xfffc0000 0x0 0x20000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x0 0xfffc0000 0x20000>;
+ hiubus: bus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
- cpu_scp_lpri: scp-shmem@0 {
- compatible = "amlogic,meson-axg-scp-shmem";
- reg = <0x13000 0x400>;
+ sysctrl: system-controller@0 {
+ compatible = "amlogic,meson-axg-hhi-sysctrl",
+ "simple-mfd", "syscon";
+ reg = <0 0 0 0x400>;
+
+ clkc: clock-controller {
+ compatible = "amlogic,axg-clkc";
+ #clock-cells = <1>;
+ };
+ };
+ };
+
+ mailbox: mailbox@ff63dc00 {
+ compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+ reg = <0 0xff63dc00 0 0x400>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
+ #mbox-cells = <1>;
+ };
+
+ audio: bus@ff642000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff642000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
+
+ clkc_audio: clock-controller@0 {
+ compatible = "amlogic,axg-audio-clkc";
+ reg = <0x0 0x0 0x0 0xb4>;
+ #clock-cells = <1>;
+
+ clocks = <&clkc CLKID_AUDIO>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL3>,
+ <&clkc CLKID_HIFI_PLL>,
+ <&clkc CLKID_FCLK_DIV3>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_GP0_PLL>;
+ clock-names = "pclk",
+ "mst_in0",
+ "mst_in1",
+ "mst_in2",
+ "mst_in3",
+ "mst_in4",
+ "mst_in5",
+ "mst_in6",
+ "mst_in7";
+
+ resets = <&reset RESET_AUDIO>;
+ };
+
+ toddr_a: audio-controller@100 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x100 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_A";
+ interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
+ resets = <&arb AXG_ARB_TODDR_A>;
+ status = "disabled";
+ };
+
+ toddr_b: audio-controller@140 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x140 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_B";
+ interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
+ resets = <&arb AXG_ARB_TODDR_B>;
+ status = "disabled";
+ };
+
+ toddr_c: audio-controller@180 {
+ compatible = "amlogic,axg-toddr";
+ reg = <0x0 0x180 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "TODDR_C";
+ interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
+ resets = <&arb AXG_ARB_TODDR_C>;
+ status = "disabled";
+ };
+
+ frddr_a: audio-controller@1c0 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x1c0 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_A";
+ interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
+ resets = <&arb AXG_ARB_FRDDR_A>;
+ status = "disabled";
+ };
+
+ frddr_b: audio-controller@200 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x200 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_B";
+ interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
+ resets = <&arb AXG_ARB_FRDDR_B>;
+ status = "disabled";
+ };
+
+ frddr_c: audio-controller@240 {
+ compatible = "amlogic,axg-frddr";
+ reg = <0x0 0x240 0x0 0x1c>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "FRDDR_C";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
+ resets = <&arb AXG_ARB_FRDDR_C>;
+ status = "disabled";
+ };
+
+ arb: reset-controller@280 {
+ compatible = "amlogic,meson-axg-audio-arb";
+ reg = <0x0 0x280 0x0 0x4>;
+ #reset-cells = <1>;
+ clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
+ };
+
+ tdmin_a: audio-controller@300 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x300 0x0 0x40>;
+ sound-name-prefix = "TDMIN_A";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_b: audio-controller@340 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x340 0x0 0x40>;
+ sound-name-prefix = "TDMIN_B";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_c: audio-controller@380 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x380 0x0 0x40>;
+ sound-name-prefix = "TDMIN_C";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmin_lb: audio-controller@3c0 {
+ compatible = "amlogic,axg-tdmin";
+ reg = <0x0 0x3c0 0x0 0x40>;
+ sound-name-prefix = "TDMIN_LB";
+ clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ spdifout: audio-controller@480 {
+ compatible = "amlogic,axg-spdifout";
+ reg = <0x0 0x480 0x0 0x50>;
+ #sound-dai-cells = <0>;
+ sound-name-prefix = "SPDIFOUT";
+ clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+ <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+ clock-names = "pclk", "mclk";
+ status = "disabled";
+ };
+
+ tdmout_a: audio-controller@500 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x500 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_A";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
+ };
+
+ tdmout_b: audio-controller@540 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x540 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_B";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
};
- cpu_scp_hpri: scp-shmem@200 {
- compatible = "amlogic,meson-axg-scp-shmem";
- reg = <0x13400 0x400>;
+ tdmout_c: audio-controller@580 {
+ compatible = "amlogic,axg-tdmout";
+ reg = <0x0 0x580 0x0 0x40>;
+ sound-name-prefix = "TDMOUT_C";
+ clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
+ <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
+ clock-names = "pclk", "sclk", "sclk_sel",
+ "lrclk", "lrclk_sel";
+ status = "disabled";
};
};
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-axg-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
- <0x0 0x0002c 0x0 0x4>,
- <0x0 0x00024 0x0 0x8>;
+ <0x0 0x0002c 0x0 0x4>,
+ <0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_ao_tx_a",
- "uart_ao_rx_a";
+ "uart_ao_rx_a";
function = "uart_ao_a";
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_ao_cts_a",
- "uart_ao_rts_a";
+ "uart_ao_rts_a";
function = "uart_ao_a";
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_ao_tx_b",
- "uart_ao_rx_b";
+ "uart_ao_rx_b";
function = "uart_ao_b";
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_ao_cts_b",
- "uart_ao_rts_b";
+ "uart_ao_rts_b";
function = "uart_ao_b";
};
};
amlogic,has-chip-id;
};
- pwm_AO_ab: pwm@7000 {
- compatible = "amlogic,meson-axg-ao-pwm";
- reg = <0x0 0x07000 0x0 0x20>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
pwm_AO_cd: pwm@2000 {
compatible = "amlogic,meson-axg-ao-pwm";
reg = <0x0 0x02000 0x0 0x20>;
status = "disabled";
};
- i2c_AO: i2c@5000 {
- compatible = "amlogic,meson-axg-i2c";
- reg = <0x0 0x05000 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_AO_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
status = "disabled";
};
+ i2c_AO: i2c@5000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x05000 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_AO_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm_AO_ab: pwm@7000 {
+ compatible = "amlogic,meson-axg-ao-pwm";
+ reg = <0x0 0x07000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
ir: ir@8000 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x8000 0x0 0x20>;
#io-channel-cells = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>,
- <&clkc_AO CLKID_AO_SAR_ADC>,
- <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
- <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
+ <&clkc_AO CLKID_AO_SAR_ADC>,
+ <&clkc_AO CLKID_AO_SAR_ADC_CLK>,
+ <&clkc_AO CLKID_AO_SAR_ADC_SEL>;
clock-names = "clkin", "core", "adc_clk", "adc_sel";
status = "disabled";
};
};
+
+ gic: interrupt-controller@ffc01000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xffc01000 0 0x1000>,
+ <0x0 0xffc02000 0 0x2000>,
+ <0x0 0xffc04000 0 0x2000>,
+ <0x0 0xffc06000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ cbus: bus@ffd00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffd00000 0x0 0x25000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+
+ reset: reset-controller@1004 {
+ compatible = "amlogic,meson-axg-reset";
+ reg = <0x0 0x01004 0x0 0x9c>;
+ #reset-cells = <1>;
+ };
+
+ gpio_intc: interrupt-controller@f080 {
+ compatible = "amlogic,meson-gpio-intc";
+ reg = <0x0 0xf080 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
+ status = "disabled";
+ };
+
+ pwm_ab: pwm@1b000 {
+ compatible = "amlogic,meson-axg-ee-pwm";
+ reg = <0x0 0x1b000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_cd: pwm@1a000 {
+ compatible = "amlogic,meson-axg-ee-pwm";
+ reg = <0x0 0x1a000 0x0 0x20>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-axg-spicc";
+ reg = <0x0 0x13000 0x0 0x3c>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-axg-spicc";
+ reg = <0x0 0x15000 0x0 0x3c>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@1c000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1c000 0x0 0x20>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@1d000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1d000 0x0 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@1e000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1e000 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@1f000 {
+ compatible = "amlogic,meson-axg-i2c";
+ reg = <0x0 0x1f000 0x0 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clkc CLKID_I2C>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart_B: serial@23000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x23000 0x0 0x18>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
+
+ uart_A: serial@24000 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x0 0x24000 0x0 0x18>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
+ };
+
+ apb: bus@ffe00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+
+ sd_emmc_b: sd@5000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x5000 0x0 0x800>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&clkc CLKID_SD_EMMC_B_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_B>;
+ };
+
+ sd_emmc_c: mmc@7000 {
+ compatible = "amlogic,meson-axg-mmc";
+ reg = <0x0 0x7000 0x0 0x800>;
+ interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_CLK0>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+ resets = <&reset RESET_SD_EMMC_C>;
+ };
+ };
+
+ sram: sram@fffc0000 {
+ compatible = "amlogic,meson-axg-sram", "mmio-sram";
+ reg = <0x0 0xfffc0000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0xfffc0000 0x20000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "amlogic,meson-axg-scp-shmem";
+ reg = <0x13000 0x400>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "amlogic,meson-axg-scp-shmem";
+ reg = <0x13400 0x400>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-g12a.dtsi"
+
+/ {
+ compatible = "amlogic,u200", "amlogic,g12a";
+ model = "Amlogic Meson G12A U200 Development Board";
+
+ aliases {
+ serial0 = &uart_AO;
+ };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+};
+
+&uart_AO {
+ status = "okay";
+};
+
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "amlogic,g12a";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <0x2>;
+ #size-cells = <0x0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ };
+
+ l2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 3 MiB reserved for ARM Trusted Firmware (BL31) */
+ secmon_reserved: secmon@5000000 {
+ reg = <0x0 0x05000000 0x0 0x300000>;
+ no-map;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ periphs: periphs@ff634000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff634000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+ };
+
+ hiubus: bus@ff63c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff63c000 0x0 0x1c00>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ };
+
+ aobus: bus@ff800000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xff800000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
+
+ uart_AO: serial@3000 {
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+ reg = <0x0 0x3000 0x0 0x18>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+
+ uart_AO_B: serial@4000 {
+ compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
+ reg = <0x0 0x4000 0x0 0x18>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+ };
+
+ gic: interrupt-controller@ffc01000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xffc01000 0 0x1000>,
+ <0x0 0xffc02000 0 0x2000>,
+ <0x0 0xffc04000 0 0x2000>,
+ <0x0 0xffc06000 0 0x2000>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ };
+
+ cbus: bus@ffd00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffd00000 0x0 0x25000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
+ };
+
+ apb: apb@ffe00000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xffe00000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+};
linux,cma {
compatible = "shared-dma-pool";
reusable;
- size = <0x0 0xbc00000>;
+ size = <0x0 0x10000000>;
alignment = <0x0 0x400000>;
linux,cma-default;
};
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
sysctrl_AO: sys-ctrl@0 {
- compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
pwrc_vpu: power-controller-vpu {
};
};
+ dmcbus: bus@c8838000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8838000 0x0 0x400>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>;
+
+ canvas: video-lut@48 {
+ compatible = "amlogic,canvas";
+ reg = <0x0 0x48 0x0 0x14>;
+ };
+ };
+
hiubus: bus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
sysctrl: system-controller@0 {
- compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
+ compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
reg = <0 0 0 0x400>;
};
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
/ {
compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
- model = "Libre Technology CC";
+ model = "Libre Computer Board AML-S905X-CC";
aliases {
serial0 = &uart_AO;
};
};
- spi_pins: spi {
+ spi_pins: spi-pins {
mux {
groups = "spi_miso",
"spi_mosi",
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf0_in_port: endpoint {
- slave-mode;
remote-endpoint = <&main_funnel_out_port>;
};
};
+ };
- /* output port */
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf0_out_port: endpoint {
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port0>;
+ in-ports {
+ port {
+ tpiu_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port0>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
main_funnel_out_port: endpoint {
remote-endpoint = <&etf0_in_port>;
};
};
+ };
- /* input ports */
- port@1 {
+ main_funnel_in_ports: in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
main_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_funnel_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
main_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_funnel_out_port>;
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
+ arm,scatter-gather;
+ in-ports {
+ port {
+ etr_in_port: endpoint {
+ remote-endpoint = <&replicator_out_port1>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- stm_out_port: endpoint {
+ out-ports {
+ port {
+ stm_out_port: endpoint {
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster0_etm0_out_port: endpoint {
- remote-endpoint = <&cluster0_funnel_in_port0>;
+ out-ports {
+ port {
+ cluster0_etm0_out_port: endpoint {
+ remote-endpoint = <&cluster0_funnel_in_port0>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster0_funnel_out_port: endpoint {
remote-endpoint = <&main_funnel_in_port0>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster0_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_etm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster0_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster0_etm1_out_port>;
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster0_etm1_out_port: endpoint {
- remote-endpoint = <&cluster0_funnel_in_port1>;
+ out-ports {
+ port {
+ cluster0_etm1_out_port: endpoint {
+ remote-endpoint = <&cluster0_funnel_in_port1>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm0_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port0>;
+ out-ports {
+ port {
+ cluster1_etm0_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port0>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
cluster1_funnel_out_port: endpoint {
remote-endpoint = <&main_funnel_in_port1>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
cluster1_funnel_in_port0: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm0_out_port>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
cluster1_funnel_in_port1: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm1_out_port>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
cluster1_funnel_in_port2: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm2_out_port>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
cluster1_funnel_in_port3: endpoint {
- slave-mode;
remote-endpoint = <&cluster1_etm3_out_port>;
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm1_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port1>;
+ out-ports {
+ port {
+ cluster1_etm1_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port1>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm2_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port2>;
+ out-ports {
+ port {
+ cluster1_etm2_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port2>;
+ };
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- port {
- cluster1_etm3_out_port: endpoint {
- remote-endpoint = <&cluster1_funnel_in_port3>;
+ out-ports {
+ port {
+ cluster1_etm3_out_port: endpoint {
+ remote-endpoint = <&cluster1_funnel_in_port3>;
+ };
};
};
};
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&etr_in_port>;
};
};
-
- /* replicator input port */
- port@2 {
- reg = <0>;
+ };
+ in-ports {
+ port {
replicator_in_port0: endpoint {
- slave-mode;
};
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
csys1_funnel_out_port: endpoint {
remote-endpoint = <&etf1_in_port>;
};
};
-
- /* input port */
- port@1 {
- reg = <0>;
+ };
+ in-ports {
+ port {
csys1_funnel_in_port0: endpoint {
- slave-mode;
};
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* input port */
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf1_in_port: endpoint {
- slave-mode;
remote-endpoint = <&csys1_funnel_out_port>;
};
};
-
- /* output port */
- port@1 {
- reg = <0>;
+ };
+ out-ports {
+ port {
etf1_out_port: endpoint {
remote-endpoint = <&csys2_funnel_in_port1>;
};
clocks = <&soc_smc50mhz>;
clock-names = "apb_pclk";
power-domains = <&scpi_devpd 0>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* output port */
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
csys2_funnel_out_port: endpoint {
remote-endpoint = <&replicator_in_port0>;
};
};
+ };
- /* input ports */
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
reg = <0>;
csys2_funnel_in_port0: endpoint {
slave-mode;
};
};
- port@2 {
+ port@1 {
reg = <1>;
csys2_funnel_in_port1: endpoint {
slave-mode;
remote-endpoint = <&main_funnel_in_port2>;
};
-&main_funnel {
- ports {
- port@3 {
- reg = <2>;
- main_funnel_in_port2: endpoint {
- slave-mode;
- remote-endpoint = <&stm_out_port>;
- };
+&main_funnel_in_ports {
+ port@2 {
+ reg = <2>;
+ main_funnel_in_port2: endpoint {
+ remote-endpoint = <&stm_out_port>;
};
};
};
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb \
- bcm2837-rpi-3-b-plus.dtb
+ bcm2837-rpi-3-b-plus.dtb \
+ bcm2837-rpi-cm3-io3.dtb
subdir-y += northstar2
subdir-y += stingray
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-cm3-io3.dts"
status = "disabled";
};
- ssp0: ssp@66180000 {
+ ssp0: spi@66180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x66180000 0x1000>;
interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- ssp1: ssp@66190000 {
+ ssp1: spi@66190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x66190000 0x1000>;
interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
&i2c1 {
status = "okay";
- pcf8574: pcf8574@20 {
+ pcf8574: pcf8574@27 {
compatible = "nxp,pcf8574a";
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
- ssp0: ssp@180000 {
+ ssp0: spi@180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00180000 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- ssp1: ssp@190000 {
+ ssp1: spi@190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00190000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
+
+ ports {
+ port {
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ };
};
regulators {
status = "okay";
cap-sd-highspeed;
disable-wp;
- cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>;
- cd-inverted;
+ cd-gpios = <&gpa2 4 GPIO_ACTIVE_LOW>;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
&usbdrd_dwc3 {
dr_mode = "otg";
- extcon = <&muic>;
};
&usbdrd30_phy {
vbus-supply = <&safeout1_reg>;
status = "okay";
+
+ port {
+ usb_to_muic: endpoint {
+ remote-endpoint = <&muic_to_usb>;
+ };
+ };
};
&xxti {
status = "disabled";
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1012a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
* Device Tree Include file for Freescale Layerscape-1043A family SoC.
*
* Copyright 2014-2015 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
- big-endian;
interrupts = <0 43 0x4>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1043a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
ranges = <0x0 0x5 0x00000000 0x8000000>;
};
- dspi0: dspi@2100000 {
+ dspi0: spi@2100000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
- dspi1: dspi@2110000 {
+ dspi1: spi@2110000 {
compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Shaohui Xie <Shaohui.Xie@nxp.com>
*/
nor@0,0 {
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
+ big-endian;
bank-width = <2>;
device-width = <1>;
};
reg = <0x4c>;
};
- eeprom@56 {
+ eeprom@52 {
compatible = "atmel,24c512";
reg = <0x52>;
};
- eeprom@57 {
+ eeprom@53 {
compatible = "atmel,24c512";
reg = <0x53>;
};
* Device Tree Include file for Freescale Layerscape-1046A family SoC.
*
* Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018 NXP
*
* Mingkai Hu <mingkai.hu@nxp.com>
*/
ifc: ifc@1530000 {
compatible = "fsl,ifc", "simple-bus";
reg = <0x0 0x1530000 0x0 0x10000>;
- big-endian;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
};
- qspi: quadspi@1550000 {
+ qspi: spi@1550000 {
compatible = "fsl,ls1021a-qspi";
#address-cells = <1>;
#size-cells = <0>;
#thermal-sensor-cells = <1>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
#size-cells = <0>;
crypto = &crypto;
serial0 = &serial0;
serial1 = &serial1;
+ serial2 = &serial2;
+ serial3 = &serial3;
};
cpu: cpus {
interrupts = <0 32 0x4>; /* Level high type */
};
+ serial2: serial@21d0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0500 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 33 0x4>; /* Level high type */
+ };
+
+ serial3: serial@21d0600 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21d0600 0x0 0x100>;
+ clocks = <&clockgen 4 3>;
+ interrupts = <0 33 0x4>; /* Level high type */
+ };
+
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
<0 208 4>, <0 209 4>;
};
- dspi: dspi@2100000 {
+ dspi: spi@2100000 {
status = "disabled";
compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi";
#address-cells = <1>;
3 0 0x5 0x20000000 0x00010000>;
};
- qspi: quadspi@20c0000 {
+ qspi: spi@20c0000 {
status = "disabled";
compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
#address-cells = <1>;
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_HISI) += hi3660-hikey960.dtb
+dtb-$(CONFIG_ARCH_HISI) += hi3670-hikey970.dtb
dtb-$(CONFIG_ARCH_HISI) += hi3798cv200-poplar.dtb
dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb
dtb-$(CONFIG_ARCH_HISI) += hip05-d02.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon HiKey970 Development Board
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ *
+ */
+
+/dts-v1/;
+
+#include "hi3670.dtsi"
+
+/ {
+ model = "HiKey970";
+ compatible = "hisilicon,hi3670-hikey970", "hisilicon,hi3670";
+
+ aliases {
+ serial6 = &uart6; /* console UART */
+ };
+
+ chosen {
+ stdout-path = "serial6:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ /* expect bootloader to fill in this region */
+ reg = <0x0 0x0 0x0 0x0>;
+ };
+};
+
+&uart6 {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hisilicon Hi3670 SoC
+ *
+ * Copyright (C) 2016, Hisilicon Ltd.
+ * Copyright (C) 2018, Linaro Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "hisilicon,hi3670";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&cpu4>;
+ };
+ core1 {
+ cpu = <&cpu5>;
+ };
+ core2 {
+ cpu = <&cpu6>;
+ };
+ core3 {
+ cpu = <&cpu7>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a73", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ };
+
+ gic: interrupt-controller@e82b0000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xe82b1000 0 0x1000>, /* GICD */
+ <0x0 0xe82b2000 0 0x2000>, /* GICC */
+ <0x0 0xe82b4000 0 0x2000>, /* GICH */
+ <0x0 0xe82b6000 0 0x2000>; /* GICV */
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-controller;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <1920000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ uart6_clk: clk_19_2M {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ uart6: serial@fff32000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0xfff32000 0x0 0x1000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart6_clk &uart6_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ status = "disabled";
+ };
+ };
+};
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
soc_funnel_out: endpoint {
remote-endpoint =
<&etf_in>;
};
};
+ };
- port@1 {
- reg = <0>;
+ in-ports {
+ port {
soc_funnel_in: endpoint {
- slave-mode;
remote-endpoint =
<&acpu_funnel_out>;
};
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint =
<&soc_funnel_out>;
};
};
+ };
- port@1 {
- reg = <0>;
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint =
<&replicator_in>;
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint =
<&etf_out>;
};
};
+ };
- port@1 {
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint =
};
};
- port@2 {
+ port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint =
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etr_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out0>;
};
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
tpiu_in: endpoint {
- slave-mode;
remote-endpoint =
<&replicator_out1>;
};
clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>;
clock-names = "apb_pclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ out-ports {
+ port {
acpu_funnel_out: endpoint {
remote-endpoint =
<&soc_funnel_in>;
};
};
+ };
- port@1 {
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
reg = <0>;
acpu_funnel_in0: endpoint {
- slave-mode;
remote-endpoint =
<&etm0_out>;
};
};
- port@2 {
+ port@1 {
reg = <1>;
acpu_funnel_in1: endpoint {
- slave-mode;
remote-endpoint =
<&etm1_out>;
};
};
- port@3 {
+ port@2 {
reg = <2>;
acpu_funnel_in2: endpoint {
- slave-mode;
remote-endpoint =
<&etm2_out>;
};
};
- port@4 {
+ port@3 {
reg = <3>;
acpu_funnel_in3: endpoint {
- slave-mode;
remote-endpoint =
<&etm3_out>;
};
};
- port@5 {
+ port@4 {
reg = <4>;
acpu_funnel_in4: endpoint {
- slave-mode;
remote-endpoint =
<&etm4_out>;
};
};
- port@6 {
+ port@5 {
reg = <5>;
acpu_funnel_in5: endpoint {
- slave-mode;
remote-endpoint =
<&etm5_out>;
};
};
- port@7 {
+ port@6 {
reg = <6>;
acpu_funnel_in6: endpoint {
- slave-mode;
remote-endpoint =
<&etm6_out>;
};
};
- port@8 {
+ port@7 {
reg = <7>;
acpu_funnel_in7: endpoint {
- slave-mode;
remote-endpoint =
<&etm7_out>;
};
cpu = <&cpu0>;
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in0>;
+ };
};
};
};
cpu = <&cpu1>;
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in1>;
+ };
};
};
};
cpu = <&cpu2>;
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in2>;
+ };
};
};
};
cpu = <&cpu3>;
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in3>;
+ };
};
};
};
cpu = <&cpu4>;
- port {
- etm4_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in4>;
+ out-ports {
+ port {
+ etm4_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in4>;
+ };
};
};
};
cpu = <&cpu5>;
- port {
- etm5_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in5>;
+ out-ports {
+ port {
+ etm5_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in5>;
+ };
};
};
};
cpu = <&cpu6>;
- port {
- etm6_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in6>;
+ out-ports {
+ port {
+ etm6_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in6>;
+ };
};
};
};
cpu = <&cpu7>;
- port {
- etm7_out: endpoint {
- remote-endpoint =
- <&acpu_funnel_in7>;
+ out-ports {
+ port {
+ etm7_out: endpoint {
+ remote-endpoint =
+ <&acpu_funnel_in7>;
+ };
};
};
};
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x102>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
reg = <0x0 0x103>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
+ clocks = <&stub_clock 0>;
operating-points-v2 = <&cpu_opp_table>;
cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
#cooling-cells = <2>; /* min followed by max */
clock-names = "apb_pclk";
status="disabled";
};
- spi0: ssp@fe800000 {
+ spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
- spi1: ssp@fe900000 {
+ spi1: spi@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "apb_pclk";
status="disabled";
};
- spi0: ssp@fe800000 {
+ spi0: spi@fe800000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe800000 0x1000>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_bus>;
clock-names = "apb_pclk";
};
- spi1: ssp@fe900000 {
+ spi1: spi@fe900000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x0 0xfe900000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-7040-db.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-clearfog-gt-8k.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8040-mcbin.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-8080-db.dtb
compatible = "marvell,armada3720", "marvell,armada3710";
cpus {
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53","arm,armv8";
reg = <0x1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
/* 32M internal register @ 0xd000_0000 */
ranges = <0x0 0x0 0xd0000000 0x2000000>;
+ wdt: watchdog@8300 {
+ compatible = "marvell,armada-3700-wdt";
+ reg = <0x8300 0x40>;
+ marvell,system-controller = <&cpu_misc>;
+ clocks = <&xtalclk>;
+ };
+
+ cpu_misc: system-controller@d000 {
+ compatible = "marvell,armada-3700-cpu-misc",
+ "syscon";
+ reg = <0xd000 0x1000>;
+ };
+
spi0: spi@10600 {
compatible = "marvell,armada-3700-spi";
#address-cells = <1>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 SolidRun ltd.
+ * Based on Marvell MACCHIATOBin board
+ *
+ * Device Tree file for SolidRun's ClearFog GT 8K
+ */
+
+#include "armada-8040.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "SolidRun ClearFog GT 8K";
+ compatible = "solidrun,clearfog-gt-8k", "marvell,armada8040",
+ "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+
+ aliases {
+ ethernet0 = &cp1_eth1;
+ ethernet1 = &cp0_eth0;
+ ethernet2 = &cp1_eth2;
+ };
+
+ v_3_3: regulator-3-3v {
+ compatible = "regulator-fixed";
+ regulator-name = "v_3_3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ status = "okay";
+ };
+
+ v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
+ compatible = "regulator-fixed";
+ gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_xhci_vbus_pins>;
+ regulator-name = "v_5v0_usb3_hst_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ status = "okay";
+ };
+
+ usb3h0_phy: usb3_phy0 {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&v_5v0_usb3_hst_vbus>;
+ };
+
+ sfp_cp0_eth0: sfp-cp0-eth0 {
+ compatible = "sff,sfp";
+ i2c-bus = <&cp0_i2c1>;
+ mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
+ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&cp0_led0_pins
+ &cp0_led1_pins>;
+ pinctrl-names = "default";
+ /* No designated function for these LEDs at the moment */
+ led0 {
+ label = "clearfog-gt-8k:green:led0";
+ gpios = <&cp0_gpio2 8 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ led1 {
+ label = "clearfog-gt-8k:green:led1";
+ gpios = <&cp0_gpio2 9 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
+ pinctrl-names = "default";
+
+ button_0 {
+ /* The rear button */
+ label = "Rear Button";
+ gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <BTN_0>;
+ };
+
+ button_1 {
+ /* The wps button */
+ label = "WPS Button";
+ gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
+ linux,can-disable;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+};
+
+&ap_sdhci0 {
+ bus-width = <8>;
+ no-1-8-v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp0_i2c0 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c0_pins>;
+ status = "okay";
+};
+
+&cp0_i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_i2c1_pins>;
+ status = "okay";
+};
+
+&cp0_pinctrl {
+ /*
+ * MPP Bus:
+ * [0-31] = 0xff: Keep default CP0_shared_pins:
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32, 33, 34] pci0/1/2 reset
+ * [35-38] CP0 I2C1 and I2C0
+ * [39] GPIO reset button
+ * [40,41] LED0 and LED1
+ * [43] 1512 phy reset
+ * [47] USB VBUS EN (active low)
+ * [48] FAN PWM
+ * [49] SFP+ present signal
+ * [50] TPM interrupt
+ * [51] WLAN0 disable
+ * [52] WLAN1 disable
+ * [53] LTE disable
+ * [54] NFC reset
+ * [55] Micro SD card detect
+ * [56-61] Micro SD
+ */
+
+ cp0_pci0_reset_pins: pci0-reset-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ cp0_pci1_reset_pins: pci1-reset-pins {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ cp0_pci2_reset_pins: pci2-reset-pins {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ cp0_i2c1_pins: i2c1-pins {
+ marvell,pins = "mpp35", "mpp36";
+ marvell,function = "i2c1";
+ };
+
+ cp0_i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp37", "mpp38";
+ marvell,function = "i2c0";
+ };
+
+ cp0_gpio_reset_pins: gpio-reset-pins {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ cp0_led0_pins: led0-pins {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ cp0_led1_pins: led1-pins {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ cp0_copper_eth_phy_reset: copper-eth-phy-reset {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
+ cp0_xhci_vbus_pins: xhci0-vbus-pins {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ cp0_fan_pwm_pins: fan-pwm-pins {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ cp0_sfp_present_pins: sfp-present-pins {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+
+ cp0_tpm_irq_pins: tpm-irq-pins {
+ marvell,pins = "mpp50";
+ marvell,function = "gpio";
+ };
+
+ cp0_sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
+ "mpp60", "mpp61";
+ marvell,function = "sdio";
+ };
+};
+
+&cp0_pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_pci0_reset_pins>;
+ reset-gpios = <&cp0_gpio2 0 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&cp0_gpio2 {
+ sata_reset {
+ gpio-hog;
+ gpios = <1 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
+&cp0_ethernet {
+ status = "okay";
+};
+
+/* SFP */
+&cp0_eth0 {
+ status = "okay";
+ phy-mode = "10gbase-kr";
+ managed = "in-band-status";
+ phys = <&cp0_comphy2 0>;
+ sfp = <&sfp_cp0_eth0>;
+};
+
+&cp0_sdhci0 {
+ broken-cd;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp0_sdhci_pins>;
+ status = "okay";
+ vqmmc-supply = <&v_3_3>;
+};
+
+&cp1_pinctrl {
+ /*
+ * MPP Bus:
+ * [0-5] TDM
+ * [6] VHV Enable
+ * [7] CP1 SPI0 CSn1 (FXS)
+ * [8] CP1 SPI0 CSn0 (TPM)
+ * [9.11]CP1 SPI0 MOSI/MISO/CLK
+ * [13] CP1 SPI1 MISO (TDM and SPI ROM shared)
+ * [14] CP1 SPI1 CS0n (64Mb SPI ROM)
+ * [15] CP1 SPI1 MOSI (TDM and SPI ROM shared)
+ * [16] CP1 SPI1 CLK (TDM and SPI ROM shared)
+ * [24] Topaz switch reset
+ * [26] Buzzer
+ * [27] CP1 SMI MDIO
+ * [28] CP1 SMI MDC
+ * [29] CP0 10G SFP TX Disable
+ * [30] WPS button
+ * [31] Front panel button
+ */
+
+ cp1_spi1_pins: spi1-pins {
+ marvell,pins = "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "spi1";
+ };
+
+ cp1_switch_reset_pins: switch-reset-pins {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ cp1_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp27", "mpp28";
+ marvell,function = "ge";
+ };
+
+ cp1_sfp_tx_disable_pins: sfp-tx-disable-pins {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ cp1_wps_button_pins: wps-button-pins {
+ marvell,pins = "mpp30";
+ marvell,function = "gpio";
+ };
+};
+
+&cp1_sata0 {
+ pinctrl-0 = <&cp0_pci1_reset_pins>;
+ status = "okay";
+};
+
+&cp1_mdio {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_ge_mdio_pins>;
+ status = "okay";
+
+ ge_phy: ethernet-phy@0 {
+ /* LED0 - GB link
+ * LED1 - on: link, blink: activity
+ */
+ marvell,reg-init = <3 16 0 0x1017>;
+ reg = <0>;
+ };
+
+ switch0: switch0@4 {
+ compatible = "marvell,mv88e6085";
+ reg = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_switch_reset_pins>;
+ reset-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_LOW>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-handle = <&switch0phy0>;
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan1";
+ phy-handle = <&switch0phy1>;
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-handle = <&switch0phy2>;
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "lan3";
+ phy-handle = <&switch0phy3>;
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&cp1_eth2>;
+ };
+ };
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0phy0: switch0phy0@11 {
+ reg = <0x11>;
+ };
+
+ switch0phy1: switch0phy1@12 {
+ reg = <0x12>;
+ };
+
+ switch0phy2: switch0phy2@13 {
+ reg = <0x13>;
+ };
+
+ switch0phy3: switch0phy3@14 {
+ reg = <0x14>;
+ };
+ };
+ };
+};
+
+&cp1_ethernet {
+ status = "okay";
+};
+
+/* 1G copper */
+&cp1_eth1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy = <&ge_phy>;
+ phys = <&cp1_comphy3 1>;
+};
+
+/* Switch uplink */
+&cp1_eth2 {
+ status = "okay";
+ phy-mode = "2500base-x";
+ phys = <&cp1_comphy5 2>;
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
+};
+
+&cp1_spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&cp1_spi1_pins>;
+ status = "okay";
+
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
+};
+
+&cp1_usb3_0 {
+ usb-phy = <&usb3h0_phy>;
+ status = "okay";
+};
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>;
enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0>;
};
};
};
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
/dts-v1/;
method = "smc";
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ idle_states {
+ entry_method = "arm,pcsi";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <80>;
+ exit-latency-us = <160>;
+ min-residency-us = <320>;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <500>;
+ exit-latency-us = <1000>;
+ min-residency-us = <2500>;
+ };
+ };
+ };
+
ap806 {
#address-cells = <2>;
#size-cells = <2>;
interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
+ sei: interrupt-controller@3f0200 {
+ compatible = "marvell,ap806-sei";
+ reg = <0x3f0200 0x40>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ msi-controller;
+ };
+
xor@400000 {
compatible = "marvell,armada-7k-xor", "marvell,xor-v2";
reg = <0x400000 0x1000>,
};
};
- ap_thermal: thermal@6f808c {
- compatible = "marvell,armada-ap806-thermal";
- reg = <0x6f808c 0x4>,
- <0x6f8084 0x8>;
+ ap_syscon1: system-controller@6f8000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x6f8000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ap_thermal: thermal-sensor@80 {
+ compatible = "marvell,armada-ap806-thermal";
+ reg = <0x80 0x10>;
+ #thermal-sensor-cells = <1>;
+ };
};
};
};
+
+ /*
+ * The thermal IP features one internal sensor plus, if applicable, one
+ * remote channel wired to one sensor per CPU.
+ *
+ * The cooling maps are always empty as there are no cooling devices.
+ */
+ thermal-zones {
+ ap_thermal_ic: ap-thermal-ic {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 0>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu1: ap-thermal-cpu1 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 1>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu2: ap-thermal-cpu2 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 2>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu3: ap-thermal-cpu3 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 3>;
+
+ trips { };
+ cooling-maps { };
+ };
+
+ ap_thermal_cpu4: ap-thermal-cpu4 {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&ap_thermal 4>;
+
+ trips { };
+ cooling-maps { };
+ };
+ };
};
#size-cells = <0>;
compatible = "marvell,armada-ap810-octa";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x000>;
enable-method = "psci";
};
- cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x001>;
enable-method = "psci";
};
- cpu@100 {
+ cpu2: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x100>;
enable-method = "psci";
};
- cpu@101 {
+ cpu3: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x101>;
enable-method = "psci";
};
- cpu@200 {
+ cpu4: cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x200>;
enable-method = "psci";
};
- cpu@201 {
+ cpu5: cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x201>;
enable-method = "psci";
};
- cpu@300 {
+ cpu6: cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x300>;
enable-method = "psci";
};
- cpu@301 {
+ cpu7: cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x301>;
#define PASTER(x, y) x ## y
#define EVALUATOR(x, y) PASTER(x, y)
#define CP110_LABEL(name) EVALUATOR(CP110_NAME, EVALUATOR(_, name))
+#define CP110_NODE_NAME(name) EVALUATOR(CP110_NAME, EVALUATOR(-, name))
#define ADDRESSIFY(addr) EVALUATOR(0x, addr)
*/
#include <dt-bindings/interrupt-controller/mvebu-icu.h>
+#include <dt-bindings/thermal/thermal.h>
#include "armada-common.dtsi"
* save one indentation level
*/
CP110_NAME: CP110_NAME { };
+
+ /*
+ * CPs only have one sensor in the thermal IC.
+ *
+ * The cooling maps are empty as there are no cooling devices.
+ */
+ thermal-zones {
+ CP110_LABEL(thermal_ic): CP110_NODE_NAME(thermal-ic) {
+ polling-delay-passive = <1000>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&CP110_LABEL(thermal) 0>;
+
+ trips { };
+ cooling-maps { };
+ };
+ };
};
&CP110_NAME {
#address-cells = <2>;
#size-cells = <2>;
compatible = "simple-bus";
- interrupt-parent = <&CP110_LABEL(icu)>;
+ interrupt-parent = <&CP110_LABEL(icu_nsr)>;
ranges;
config-space@CP110_BASE {
dma-coherent;
CP110_LABEL(eth0): eth0 {
- interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH>,
+ <43 IRQ_TYPE_LEVEL_HIGH>,
+ <47 IRQ_TYPE_LEVEL_HIGH>,
+ <51 IRQ_TYPE_LEVEL_HIGH>,
+ <55 IRQ_TYPE_LEVEL_HIGH>,
+ <59 IRQ_TYPE_LEVEL_HIGH>,
+ <63 IRQ_TYPE_LEVEL_HIGH>,
+ <67 IRQ_TYPE_LEVEL_HIGH>,
+ <71 IRQ_TYPE_LEVEL_HIGH>,
+ <129 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <0>;
gop-port-id = <0>;
status = "disabled";
};
CP110_LABEL(eth1): eth1 {
- interrupts = <ICU_GRP_NSR 40 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH>,
+ <44 IRQ_TYPE_LEVEL_HIGH>,
+ <48 IRQ_TYPE_LEVEL_HIGH>,
+ <52 IRQ_TYPE_LEVEL_HIGH>,
+ <56 IRQ_TYPE_LEVEL_HIGH>,
+ <60 IRQ_TYPE_LEVEL_HIGH>,
+ <64 IRQ_TYPE_LEVEL_HIGH>,
+ <68 IRQ_TYPE_LEVEL_HIGH>,
+ <72 IRQ_TYPE_LEVEL_HIGH>,
+ <128 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <1>;
gop-port-id = <2>;
status = "disabled";
};
CP110_LABEL(eth2): eth2 {
- interrupts = <ICU_GRP_NSR 41 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
- "tx-cpu3", "rx-shared", "link";
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH>,
+ <45 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>,
+ <57 IRQ_TYPE_LEVEL_HIGH>,
+ <61 IRQ_TYPE_LEVEL_HIGH>,
+ <65 IRQ_TYPE_LEVEL_HIGH>,
+ <69 IRQ_TYPE_LEVEL_HIGH>,
+ <73 IRQ_TYPE_LEVEL_HIGH>,
+ <127 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hif0", "hif1", "hif2",
+ "hif3", "hif4", "hif5", "hif6", "hif7",
+ "hif8", "link";
port-id = <2>;
gop-port-id = <3>;
status = "disabled";
CP110_LABEL(icu): interrupt-controller@1e0000 {
compatible = "marvell,cp110-icu";
reg = <0x1e0000 0x440>;
- #interrupt-cells = <3>;
- interrupt-controller;
- msi-parent = <&gicp>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP110_LABEL(icu_nsr): interrupt-controller@10 {
+ compatible = "marvell,cp110-icu-nsr";
+ reg = <0x10 0x20>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&gicp>;
+ };
+
+ CP110_LABEL(icu_sei): interrupt-controller@50 {
+ compatible = "marvell,cp110-icu-sei";
+ reg = <0x50 0x10>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ msi-parent = <&sei>;
+ };
};
CP110_LABEL(rtc): rtc@284000 {
compatible = "marvell,armada-8k-rtc";
reg = <0x284000 0x20>, <0x284080 0x24>;
reg-names = "rtc", "rtc-soc";
- interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- CP110_LABEL(thermal): thermal@400078 {
- compatible = "marvell,armada-cp110-thermal";
- reg = <0x400078 0x4>,
- <0x400070 0x8>;
+ interrupts = <77 IRQ_TYPE_LEVEL_HIGH>;
};
CP110_LABEL(syscon0): system-controller@440000 {
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 86 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 85 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 84 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <86 IRQ_TYPE_LEVEL_HIGH>,
+ <85 IRQ_TYPE_LEVEL_HIGH>,
+ <84 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
#gpio-cells = <2>;
gpio-ranges = <&CP110_LABEL(pinctrl) 0 32 31>;
interrupt-controller;
- interrupts = <ICU_GRP_NSR 82 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 81 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 80 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <82 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
};
+ CP110_LABEL(syscon1): system-controller@400000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x400000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ CP110_LABEL(thermal): thermal-sensor@70 {
+ compatible = "marvell,armada-cp110-thermal";
+ reg = <0x70 0x10>;
+ #thermal-sensor-cells = <1>;
+ };
+ };
+
CP110_LABEL(usb3_0): usb3@500000 {
compatible = "marvell,armada-8k-xhci",
"generic-xhci";
reg = <0x500000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 106 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <106 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 22>,
<&CP110_LABEL(clk) 1 16>;
"generic-xhci";
reg = <0x510000 0x4000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 105 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <105 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 23>,
<&CP110_LABEL(clk) 1 16>;
"generic-ahci";
reg = <0x540000 0x30000>;
dma-coherent;
- interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&CP110_LABEL(clk) 1 15>,
<&CP110_LABEL(clk) 1 16>;
status = "disabled";
reg = <0x701000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <120 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
reg = <0x701100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <121 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 21>,
<&CP110_LABEL(clk) 1 17>;
compatible = "snps,dw-apb-uart";
reg = <0x702000 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <122 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
compatible = "snps,dw-apb-uart";
reg = <0x702100 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <123 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
compatible = "snps,dw-apb-uart";
reg = <0x702200 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <124 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
compatible = "snps,dw-apb-uart";
reg = <0x702300 0x100>;
reg-shift = <2>;
- interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <125 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
clock-names = "baudclk", "apb_pclk";
clocks = <&CP110_LABEL(clk) 1 21>,
reg = <0x720000 0x54>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 2>,
<&CP110_LABEL(clk) 1 17>;
compatible = "marvell,armada-8k-rng",
"inside-secure,safexcel-eip76";
reg = <0x760000 0x7d>;
- interrupts = <ICU_GRP_NSR 95 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 25>,
<&CP110_LABEL(clk) 1 17>;
CP110_LABEL(sdhci0): sdhci@780000 {
compatible = "marvell,armada-cp110-sdhci";
reg = <0x780000 0x300>;
- interrupts = <ICU_GRP_NSR 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "core", "axi";
clocks = <&CP110_LABEL(clk) 1 4>, <&CP110_LABEL(clk) 1 18>;
dma-coherent;
CP110_LABEL(crypto): crypto@800000 {
compatible = "inside-secure,safexcel-eip197b";
reg = <0x800000 0x200000>;
- interrupts = <ICU_GRP_NSR 87 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 88 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 89 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 90 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 91 IRQ_TYPE_LEVEL_HIGH>,
- <ICU_GRP_NSR 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <87 IRQ_TYPE_LEVEL_HIGH>,
+ <88 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <90 IRQ_TYPE_LEVEL_HIGH>,
+ <91 IRQ_TYPE_LEVEL_HIGH>,
+ <92 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "mem", "ring0", "ring1",
"ring2", "ring3", "eip";
clock-names = "core", "reg";
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(0) 0 CP110_PCIEx_MEM_BASE(0) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
clocks = <&CP110_LABEL(clk) 1 13>, <&CP110_LABEL(clk) 1 14>;
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(1) 0 CP110_PCIEx_MEM_BASE(1) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
/* non-prefetchable memory */
0x82000000 0 CP110_PCIEx_MEM_BASE(2) 0 CP110_PCIEx_MEM_BASE(2) 0 0xf00000>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &CP110_LABEL(icu) ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
- interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map = <0 0 0 0 &CP110_LABEL(icu_nsr) 23 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
num-lanes = <1>;
clock-names = "core", "reg";
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
status = "disabled";
};
+ spis1: spi@10013000 {
+ compatible = "mediatek,mt2712-spi-slave";
+ reg = <0 0x10013000 0 0x100>;
+ interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_AO_SPI1>;
+ clock-names = "spi";
+ assigned-clocks = <&topckgen CLK_TOP_SPISLV_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+ status = "disabled";
+ };
+
apmixedsys: syscon@10209000 {
compatible = "mediatek,mt2712-apmixedsys", "syscon";
reg = <0 0x10209000 0 0x1000>;
--- /dev/null
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0 OR MIT)
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mt7622.dtsi"
+#include "mt6380.dtsi"
+
+/ {
+ model = "Bananapi BPI-R64";
+ compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
+ };
+
+ cpus {
+ cpu@0 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+
+ cpu@1 {
+ proc-supply = <&mt6380_vcpu_reg>;
+ sram-supply = <&mt6380_vm_reg>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ factory {
+ label = "factory";
+ linux,code = <BTN_0>;
+ gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ green {
+ label = "bpi-r64:pio:green";
+ gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ red {
+ label = "bpi-r64:pio:red";
+ gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ memory {
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&bch {
+ status = "disabled";
+};
+
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <¶llel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+ status = "okay";
+
+ pcie@0,0 {
+ status = "okay";
+ };
+
+ pcie@1,0 {
+ status = "okay";
+ };
+};
+
+&pio {
+ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
+ * SATA functions. i.e. output-high: PCIe, output-low: SATA
+ */
+ asm_sel {
+ gpio-hog;
+ gpios = <90 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ /* eMMC is shared pin with parallel NAND */
+ emmc_pins_default: emmc-pins-default {
+ mux {
+ function = "emmc", "emmc_rst";
+ groups = "emmc";
+ };
+
+ /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
+ * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
+ * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
+ */
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ bias-pull-down;
+ };
+ };
+
+ emmc_pins_uhs: emmc-pins-uhs {
+ mux {
+ function = "emmc";
+ groups = "emmc";
+ };
+
+ conf-cmd-dat {
+ pins = "NDL0", "NDL1", "NDL2",
+ "NDL3", "NDL4", "NDL5",
+ "NDL6", "NDL7", "NRB";
+ input-enable;
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "NCLE";
+ drive-strength = <4>;
+ bias-pull-down;
+ };
+ };
+
+ eth_pins: eth-pins {
+ mux {
+ function = "eth";
+ groups = "mdc_mdio", "rgmii_via_gmac2";
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c1_0";
+ };
+ };
+
+ i2c2_pins: i2c2-pins {
+ mux {
+ function = "i2c";
+ groups = "i2c2_0";
+ };
+ };
+
+ i2s1_pins: i2s1-pins {
+ mux {
+ function = "i2s";
+ groups = "i2s_out_mclk_bclk_ws",
+ "i2s1_in_data",
+ "i2s1_out_data";
+ };
+
+ conf {
+ pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
+ "I2S_WS", "I2S_MCLK";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ };
+
+ irrx_pins: irrx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_rx";
+ };
+ };
+
+ irtx_pins: irtx-pins {
+ mux {
+ function = "ir";
+ groups = "ir_1_tx";
+ };
+ };
+
+ /* Parallel nand is shared pin with eMMC */
+ parallel_nand_pins: parallel-nand-pins {
+ mux {
+ function = "flash";
+ groups = "par_nand";
+ };
+ };
+
+ pcie0_pins: pcie0-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie0_pad_perst",
+ "pcie0_1_waken",
+ "pcie0_1_clkreq";
+ };
+ };
+
+ pcie1_pins: pcie1-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie1_pad_perst",
+ "pcie1_0_waken",
+ "pcie1_0_clkreq";
+ };
+ };
+
+ pmic_bus_pins: pmic-bus-pins {
+ mux {
+ function = "pmic";
+ groups = "pmic_bus";
+ };
+ };
+
+ pwm7_pins: pwm1-2-pins {
+ mux {
+ function = "pwm";
+ groups = "pwm_ch7_2";
+ };
+ };
+
+ wled_pins: wled-pins {
+ mux {
+ function = "led";
+ groups = "wled";
+ };
+ };
+
+ sd0_pins_default: sd0-pins-default {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+
+ /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
+ * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
+ * DAT2, DAT3, CMD, CLK for SD respectively.
+ */
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ conf-clk {
+ pins = "I2S3_OUT";
+ drive-strength = <12>;
+ bias-pull-down;
+ };
+ conf-cd {
+ pins = "TXD3";
+ bias-pull-up;
+ };
+ };
+
+ sd0_pins_uhs: sd0-pins-uhs {
+ mux {
+ function = "sd";
+ groups = "sd_0";
+ };
+
+ conf-cmd-data {
+ pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
+ "I2S2_IN","I2S4_OUT";
+ input-enable;
+ bias-pull-up;
+ };
+
+ conf-clk {
+ pins = "I2S3_OUT";
+ bias-pull-down;
+ };
+ };
+
+ /* Serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ spic0_pins: spic0-pins {
+ mux {
+ function = "spi";
+ groups = "spic0_0";
+ };
+ };
+
+ spic1_pins: spic1-pins {
+ mux {
+ function = "spi";
+ groups = "spic1_0";
+ };
+ };
+
+ /* SPI-NOR is shared pin with serial NAND */
+ spi_nor_pins: spi-nor-pins {
+ mux {
+ function = "flash";
+ groups = "spi_nor";
+ };
+ };
+
+ /* serial NAND is shared pin with SPI-NOR */
+ serial_nand_pins: serial-nand-pins {
+ mux {
+ function = "flash";
+ groups = "snfi";
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ mux {
+ function = "uart";
+ groups = "uart0_0_tx_rx" ;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ mux {
+ function = "uart";
+ groups = "uart2_1_tx_rx" ;
+ };
+ };
+
+ watchdog_pins: watchdog-pins {
+ mux {
+ function = "watchdog";
+ groups = "watchdog";
+ };
+ };
+};
+
+&pwm {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pins>;
+ status = "okay";
+};
+
+&pwrap {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_bus_pins>;
+
+ status = "okay";
+};
+
+&sata {
+ status = "disable";
+};
+
+&sata_phy {
+ status = "disable";
+};
+
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic0_pins>;
+ status = "okay";
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic1_pins>;
+ status = "okay";
+};
+
+&ssusb {
+ vusb33-supply = <®_3p3v>;
+ vbus-supply = <®_5v>;
+ status = "okay";
+};
+
+&u3phy {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+ status = "okay";
+};
+
+&watchdog {
+ pinctrl-names = "default";
+ pinctrl-0 = <&watchdog_pins>;
+ status = "okay";
+};
};
memory {
- reg = <0 0x40000000 0 0x3F000000>;
+ reg = <0 0x40000000 0 0x20000000>;
};
reg_1p8v: regulator-1p8v {
};
};
+&bch {
+ status = "disabled";
+};
+
+&btif {
+ status = "okay";
+};
+
+&cir {
+ pinctrl-names = "default";
+ pinctrl-0 = <&irrx_pins>;
+ status = "okay";
+};
+
+ð {
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_pins>;
+ status = "okay";
+
+ gmac1: mac@1 {
+ compatible = "mediatek,eth-mac";
+ reg = <1>;
+ phy-handle = <&phy5>;
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy5: ethernet-phy@5 {
+ reg = <5>;
+ phy-mode = "sgmii";
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
+ status = "okay";
+};
+
+&mmc0 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&emmc_pins_default>;
+ pinctrl-1 = <&emmc_pins_uhs>;
+ status = "okay";
+ bus-width = <8>;
+ max-frequency = <50000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_1p8v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&sd0_pins_default>;
+ pinctrl-1 = <&sd0_pins_uhs>;
+ status = "okay";
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ cap-sd-highspeed;
+ r_smpl = <1>;
+ cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_3p3v>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
+};
+
+&nandc {
+ pinctrl-names = "default";
+ pinctrl-0 = <¶llel_nand_pins>;
+ status = "disabled";
+};
+
+&nor_flash {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_nor_pins>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
};
};
-&bch {
- status = "disabled";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-ð {
- pinctrl-names = "default";
- pinctrl-0 = <ð_pins>;
- status = "okay";
-
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-handle = <&phy5>;
- };
-
- mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy5: ethernet-phy@5 {
- reg = <5>;
- phy-mode = "sgmii";
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&emmc_pins_default>;
- pinctrl-1 = <&emmc_pins_uhs>;
- status = "okay";
- bus-width = <8>;
- max-frequency = <50000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
- non-removable;
-};
-
-&mmc1 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
- status = "okay";
- bus-width = <4>;
- max-frequency = <50000000>;
- cap-sd-highspeed;
- r_smpl = <1>;
- cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_3p3v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <¶llel_nand_pins>;
- status = "disabled";
-};
-
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>;
#cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
+ cci-control-port = <&cci_control2>;
};
cpu1: cpu@1 {
#cooling-cells = <2>;
enable-method = "psci";
clock-frequency = <1300000000>;
+ cci-control-port = <&cci_control2>;
};
};
method = "smc";
};
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-affinity = <&cpu0>, <&cpu1>;
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
#reset-cells = <1>;
};
+ timer: timer@10004000 {
+ compatible = "mediatek,mt7622-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10004000 0 0x80>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
+ <&topckgen CLK_TOP_RTC>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
scpsys: scpsys@10006000 {
compatible = "mediatek,mt7622-scpsys",
"syscon";
<0 0x10360000 0 0x2000>;
};
+ cci: cci@10390000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0 0x10390000 0 0x1000>;
+ ranges = <0 0 0x10390000 0x10000>;
+
+ cci_control0: slave-if@1000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace-lite";
+ reg = <0x1000 0x1000>;
+ };
+
+ cci_control1: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control2: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+
+ pmu@9000 {
+ compatible = "arm,cci-400-pmu,r1";
+ reg = <0x9000 0x5000>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
auxadc: adc@11001000 {
compatible = "mediatek,mt7622-auxadc";
reg = <0 0x11001000 0 0x1000>;
reg-shift = <2>;
reg-io-width = <4>;
status = "disabled";
+
+ bluetooth {
+ compatible = "mediatek,mt7622-bluetooth";
+ power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
+ clocks = <&clk25m>;
+ clock-names = "ref";
+ };
};
nandc: nfi@1100d000 {
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
#include <dt-bindings/memory/tegra186-mc.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/power/tegra186-powergate.h>
#include <dt-bindings/reset/tegra186-reset.h>
#include <dt-bindings/thermal/tegra186-bpmp-thermal.h>
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-up-offset-sdr104 = <0x03>;
+ nvidia,pad-autocal-pull-down-offset-sdr104 = <0x05>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
+ assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+ <&bpmp TEGRA186_CLK_PLLP_OUT0>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLP_OUT0>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC2>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc2_3v3>;
+ pinctrl-1 = <&sdmmc2_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&bpmp TEGRA186_RESET_SDMMC3>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc3_3v3>;
+ pinctrl-1 = <&sdmmc3_1v8>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
+ nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-3v3-timeout = <0x06>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x07>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x07>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0xb>;
status = "disabled";
};
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
clock-names = "sdhci";
+ assigned-clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+ <&bpmp TEGRA186_CLK_PLLC4_VCO>;
+ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
resets = <&bpmp TEGRA186_RESET_SDMMC4>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
+ nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
+ nvidia,pad-autocal-pull-down-offset-1v8-timeout = <0x0a>;
+ nvidia,default-tap = <0x5>;
+ nvidia,default-trim = <0x9>;
+ nvidia,dqs-trim = <63>;
+ mmc-hs400-1_8v;
status = "disabled";
};
<0 0x0c380000 0 0x10000>,
<0 0x0c390000 0 0x10000>;
reg-names = "pmc", "wake", "aotag", "scratch";
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc2_3v3: sdmmc2-3v3 {
+ pins = "sdmmc2-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc2_1v8: sdmmc2-1v8 {
+ pins = "sdmmc2-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc3_3v3: sdmmc3-3v3 {
+ pins = "sdmmc3-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc3_1v8: sdmmc3-1v8 {
+ pins = "sdmmc3-hv";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
};
ccplex@e000000 {
};
gen1_i2c: i2c@3160000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03160000 0x10000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
cam_i2c: i2c@3180000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03180000 0x10000>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
/* shares pads with dpaux1 */
dp_aux_ch1_i2c: i2c@3190000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x03190000 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
/* shares pads with dpaux0 */
dp_aux_ch0_i2c: i2c@31b0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031b0000 0x10000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
gen7_i2c: i2c@31c0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031c0000 0x10000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
gen9_i2c: i2c@31e0000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x031e0000 0x10000>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
gen2_i2c: i2c@c240000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x0c240000 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
};
gen8_i2c: i2c@c250000 {
- compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c";
+ compatible = "nvidia,tegra194-i2c";
reg = <0x0c250000 0x10000>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
vddio_sdmmc: ldo2 {
regulator-name = "VDDIO_SDMMC";
- /*
- * Technically this supply should have
- * a supported range from 1.8 - 3.3 V.
- * However, that would cause the SDHCI
- * driver to request 2.7 V upon access
- * and that in turn will cause traffic
- * to be broken. Leave it at 3.3 V for
- * now.
- */
- regulator-min-microvolt = <3300000>;
+ regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
status = "okay";
bus-width = <8>;
non-removable;
+ vqmmc-supply = <&vdd_1v8>;
};
clocks {
sdhci@700b0000 {
status = "okay";
bus-width = <4>;
- no-1-8-v;
cd-gpios = <&gpio TEGRA_GPIO(Z, 1) GPIO_ACTIVE_LOW>;
#include <dt-bindings/gpio/tegra-gpio.h>
#include <dt-bindings/memory/tegra210-mc.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
+#include <dt-bindings/pinctrl/pinctrl-tegra-io-pad.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/tegra124-soctherm.h>
#power-domain-cells = <0>;
};
};
+
+ sdmmc1_3v3: sdmmc1-3v3 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc1_1v8: sdmmc1-1v8 {
+ pins = "sdmmc1";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
+
+ sdmmc3_3v3: sdmmc3-3v3 {
+ pins = "sdmmc3";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_3V3>;
+ };
+
+ sdmmc3_1v8: sdmmc3-1v8 {
+ pins = "sdmmc3";
+ power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>;
+ };
};
fuse@7000f800 {
clock-names = "sdhci";
resets = <&tegra_car 14>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc1_3v3>;
+ pinctrl-1 = <&sdmmc1_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ nvidia,default-tap = <0x2>;
+ nvidia,default-trim = <0x4>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+ <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>,
+ <&tegra_car TEGRA210_CLK_PLL_C4>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ assigned-clock-rates = <200000000>, <1000000000>, <1000000000>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&tegra_car 9>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x0>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&tegra_car 69>;
reset-names = "sdhci";
+ pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+ pinctrl-0 = <&sdmmc3_3v3>;
+ pinctrl-1 = <&sdmmc3_1v8>;
+ nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+ nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+ nvidia,default-tap = <0x3>;
+ nvidia,default-trim = <0x3>;
status = "disabled";
};
clock-names = "sdhci";
resets = <&tegra_car 15>;
reset-names = "sdhci";
+ nvidia,pad-autocal-pull-up-offset-1v8 = <0x05>;
+ nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>;
+ nvidia,default-tap = <0x8>;
+ nvidia,default-trim = <0x0>;
+ assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+ <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>;
+ nvidia,dqs-trim = <40>;
+ mmc-hs400-1_8v;
status = "disabled";
};
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
};
};
+&spmi_bus {
+ pm8916_0: pm8916@0 {
+ pon@800 {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+};
+
&wcd_codec {
status = "okay";
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
/ {
model = "Qualcomm Technologies, Inc. DB820c";
- compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc";
+ compatible = "arrow,apq8096-db820c", "qcom,apq8096-sbc", "qcom,apq8096";
};
};
};
};
+
+&spmi_bus {
+ pmic@0 {
+ pon@800 {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+ };
+};
#include <dt-bindings/thermal/thermal.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM8916";
- compatible = "qcom,msm8916";
-
interrupt-parent = <&intc>;
#address-cells = <2>;
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- tpiu_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out1>;
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint = <&replicator_out1>;
+ };
};
};
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@4 {
reg = <4>;
funnel0_in4: endpoint {
- slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
- port@8 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel0_out: endpoint {
remote-endpoint = <&etf_in>;
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ out-ports {
#address-cells = <1>;
#size-cells = <0>;
remote-endpoint = <&tpiu_in>;
};
};
- port@2 {
- reg = <0>;
+ };
+
+ in-ports {
+ port {
replicator_in: endpoint {
- slave-mode;
remote-endpoint = <&etf_out>;
};
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
+ in-ports {
+ port {
etf_in: endpoint {
- slave-mode;
remote-endpoint = <&funnel0_out>;
};
};
- port@1 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- port {
- etr_in: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out0>;
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint = <&replicator_out0>;
+ };
};
};
};
clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
funnel1_in0: endpoint {
- slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
funnel1_in1: endpoint {
- slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
funnel1_in2: endpoint {
- slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
funnel1_in3: endpoint {
- slave-mode;
remote-endpoint = <&etm3_out>;
};
};
- port@4 {
- reg = <0>;
+ };
+
+ out-ports {
+ port {
funnel1_out: endpoint {
remote-endpoint = <&funnel0_in4>;
};
cpu = <&CPU0>;
- port {
- etm0_out: endpoint {
- remote-endpoint = <&funnel1_in0>;
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint = <&funnel1_in0>;
+ };
};
};
};
cpu = <&CPU1>;
- port {
- etm1_out: endpoint {
- remote-endpoint = <&funnel1_in1>;
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint = <&funnel1_in1>;
+ };
};
};
};
cpu = <&CPU2>;
- port {
- etm2_out: endpoint {
- remote-endpoint = <&funnel1_in2>;
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint = <&funnel1_in2>;
+ };
};
};
};
cpu = <&CPU3>;
- port {
- etm3_out: endpoint {
- remote-endpoint = <&funnel1_in3>;
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint = <&funnel1_in3>;
+ };
};
};
};
#include <dt-bindings/clock/qcom,rpmcc.h>
/ {
- model = "Qualcomm Technologies, Inc. MSM8996";
-
interrupt-parent = <&intc>;
#address-cells = <2>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
- apcs: syscon@9820000 {
- compatible = "syscon";
- reg = <0x9820000 0x1000>;
- };
-
apcs_glb: mailbox@9820000 {
compatible = "qcom,msm8996-apcs-hmss-global";
reg = <0x9820000 0x1000>;
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
label = "lpass";
- qcom,ipc = <&apcs 16 8>;
+ mboxes = <&apcs_glb 8>;
qcom,smd-edge = <1>;
qcom,remote-pid = <2>;
};
interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 10>;
+ mboxes = <&apcs_glb 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 14>;
+ mboxes = <&apcs_glb 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
- qcom,ipc = <&apcs 16 26>;
+ mboxes = <&apcs_glb 26>;
qcom,local-pid = <0>;
qcom,remote-pid = <3>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-mtp.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
+ compatible = "qcom,msm8998-mtp";
+
+ qcom,board-id = <8 0>;
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include "msm8998.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+#include "pm8005.dtsi"
+
+/ {
+ aliases {
+ serial0 = &blsp2_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ thermal-zones {
+ battery-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ battery_crit: trip0 {
+ temperature = <60000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ skin-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ skin_alert: trip0 {
+ temperature = <44000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ skip_crit: trip1 {
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8998-regulators {
+ compatible = "qcom,rpm-pm8998-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_s13-supply = <&vph_pwr>;
+ vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+ vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+ vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+ vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+ vdd_l6-supply = <&vreg_s5a_2p04>;
+ vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+ vdd_l9-supply = <&vreg_bob>;
+ vdd_l10_l23_l25-supply = <&vreg_bob>;
+ vdd_l13_l19_l21-supply = <&vreg_bob>;
+ vdd_l16_l28-supply = <&vreg_bob>;
+ vdd_l18_l22-supply = <&vreg_bob>;
+ vdd_l20_l24-supply = <&vreg_bob>;
+ vdd_l26-supply = <&vreg_s3a_1p35>;
+ vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: s3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_s5a_2p04: s5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+ vreg_s7a_1p025: s7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+ vreg_l1a_0p875: l1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ };
+ vreg_l2a_1p2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l5a_0p8: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <1808000>;
+ };
+ vreg_l7a_1p8: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l8a_1p2: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l11a_1p0: l11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l14a_1p88: l14 {
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ };
+ vreg_15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l17a_1p3: l17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ };
+ vreg_l18a_2p7: l18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l19a_3p0: l19 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l22a_2p85: l22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <2864000>;
+ };
+ vreg_l23a_3p3: l23 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ };
+ vreg_l25a_3p3: l25 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l26a_1p2: l26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l28_3p0: l28 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ };
+
+ pmi8998-regulators {
+ compatible = "qcom,rpm-pmi8998-regulators";
+
+ vdd_bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,gcc-msm8998.h>
+
+/ {
+ interrupt-parent = <&intc>;
+
+ qcom,msm-id = <292 0x0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ memory@85800000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
+ };
+
+ smem_mem: smem-mem@86000000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
+ no-map;
+ };
+
+ memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
+ no-map;
+ };
+
+ rmtfs {
+ compatible = "qcom,rmtfs-mem";
+
+ size = <0x0 0x200000>;
+ alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+ };
+
+ clocks {
+ xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ };
+
+ sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ };
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L2_0: l2-cache {
+ compatible = "arm,arch-cache";
+ cache-level = <2>;
+ };
+ L1_I_0: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_0: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_1: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_1: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_2: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_2: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ efficiency = <1024>;
+ next-level-cache = <&L2_0>;
+ L1_I_3: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_3: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU4: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L2_1: l2-cache {
+ compatible = "arm,arch-cache";
+ cache-level = <2>;
+ };
+ L1_I_100: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_100: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU5: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_101: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_101: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU6: cpu@102 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_102: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_102: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ CPU7: cpu@103 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ efficiency = <1536>;
+ next-level-cache = <&L2_1>;
+ L1_I_103: l1-icache {
+ compatible = "arm,arch-cache";
+ };
+ L1_D_103: l1-dcache {
+ compatible = "arm,arch-cache";
+ };
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+
+ core1 {
+ cpu = <&CPU1>;
+ };
+
+ core2 {
+ cpu = <&CPU2>;
+ };
+
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+
+ core1 {
+ cpu = <&CPU5>;
+ };
+
+ core2 {
+ cpu = <&CPU6>;
+ };
+
+ core3 {
+ cpu = <&CPU7>;
+ };
+ };
+ };
+ };
+
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8998";
+ };
+ };
+
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8998";
+ qcom,glink-channels = "rpm_requests";
+ };
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
+
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apcs_glb 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apcs_glb 26>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cpu_alert1: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit1: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu_alert2: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit2: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu_alert3: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit3: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal4 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu_alert4: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit4: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal5 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu_alert5: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit5: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal6 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ cpu_alert6: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit6: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-thermal7 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cpu_alert7: trip0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit7: trip1 {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
+
+ rpm_msg_ram: memory@68000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x778000 0x7000>;
+ };
+
+ qfprom: qfprom@780000 {
+ compatible = "qcom,qfprom";
+ reg = <0x780000 0x621c>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ gcc: clock-controller@100000 {
+ compatible = "qcom,gcc-msm8998";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x100000 0xb0000>;
+ };
+
+ tlmm: pinctrl@3400000 {
+ compatible = "qcom,msm8998-pinctrl";
+ reg = <0x3400000 0xc00000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
+
+ spmi_bus: spmi@800f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x800f000 0x1000>,
+ <0x8400000 0x1000000>,
+ <0x9400000 0x1000000>,
+ <0xa400000 0x220000>,
+ <0x800a000 0x3000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ cell-index = <0>;
+ };
+
+ tsens0: thermal@10aa000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10aa000 0x2000>;
+
+ #qcom,sensors = <12>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal@10ad000 {
+ compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
+ reg = <0x10ad000 0x2000>;
+
+ #qcom,sensors = <8>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tcsr_mutex_regs: syscon@1f40000 {
+ compatible = "syscon";
+ reg = <0x1f40000 0x20000>;
+ };
+
+ apcs_glb: mailbox@9820000 {
+ compatible = "qcom,msm8998-apcs-hmss-global";
+ reg = <0x17911000 0x1000>;
+
+ #mbox-cells = <1>;
+ };
+
+ blsp2_uart1: serial@c1b0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xc1b0000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ timer@17920000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x17920000 0x1000>;
+
+ frame@17921000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17921000 0x1000>,
+ <0x17922000 0x1000>;
+ };
+
+ frame@17923000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17923000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17924000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17924000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17925000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17925000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17926000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17926000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17927000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17927000 0x1000>;
+ status = "disabled";
+ };
+
+ frame@17928000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x17928000 0x1000>;
+ status = "disabled";
+ };
+ };
+
+ intc: interrupt-controller@17a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x17a00000 0x10000>, /* GICD */
+ <0x17b00000 0x100000>; /* GICR * 8 */
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x20000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+};
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
- pwrkey@800 {
- compatible = "qcom,pm8941-pwrkey";
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
reg = <0x800>;
- interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
- debounce = <15625>;
- bias-pull-up;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
};
pm8916_gpios: gpios@c000 {
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
&spmi_bus {
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
+ pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+
+ };
+
pm8994_gpios: gpios@c000 {
compatible = "qcom,pm8994-gpio";
reg = <0xc000>;
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/* Copyright 2018 Google LLC. */
-#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ thermal-zones {
+ pm8998 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&pm8998_temp>;
+
+ trips {
+ pm8998_alert0: pm8998-alert0 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ pm8998_crit: pm8998-crit {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
&spmi_bus {
pm8998_lsid0: pmic@0 {
#address-cells = <1>;
#size-cells = <0>;
+ pm8998_pon: pon@800 {
+ compatible = "qcom,pm8916-pon";
+
+ reg = <0x800>;
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+
+ pwrkey {
+ compatible = "qcom,pm8941-pwrkey";
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ pm8998_temp: temp-alarm@2400 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pm8998_coincell: coincell@2800 {
+ compatible = "qcom,pm8941-coincell";
+ reg = <0x2800>;
+
+ status = "disabled";
+ };
+
+ pm8998_adc: adc@3100 {
+ compatible = "qcom,spmi-adc-rev2";
+ reg = <0x3100>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #io-channel-cells = <1>;
+ };
+
+ rtc@6000 {
+ compatible = "qcom,pm8941-rtc";
+ reg = <0x6000>, <0x6100>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
pm8998_gpio: gpios@c000 {
compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
reg = <0xc000>;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+ pmi8998_lsid0: pmic@2 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x2 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmi8998_gpio: gpios@c000 {
+ compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio";
+ reg = <0xc000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+ <0 0xc1 0 IRQ_TYPE_NONE>,
+ <0 0xc2 0 IRQ_TYPE_NONE>,
+ <0 0xc3 0 IRQ_TYPE_NONE>,
+ <0 0xc4 0 IRQ_TYPE_NONE>,
+ <0 0xc5 0 IRQ_TYPE_NONE>,
+ <0 0xc6 0 IRQ_TYPE_NONE>,
+ <0 0xc7 0 IRQ_TYPE_NONE>,
+ <0 0xc8 0 IRQ_TYPE_NONE>,
+ <0 0xc9 0 IRQ_TYPE_NONE>,
+ <0 0xca 0 IRQ_TYPE_NONE>,
+ <0 0xcb 0 IRQ_TYPE_NONE>,
+ <0 0xcc 0 IRQ_TYPE_NONE>,
+ <0 0xcd 0 IRQ_TYPE_NONE>;
+ };
+ };
+
+ pmi8998_lsid1: pmic@3 {
+ compatible = "qcom,pmi8998", "qcom,spmi-pmic";
+ reg = <0x3 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
/dts-v1/;
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
/ {
chosen {
stdout-path = "serial0:115200n8";
};
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8998 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8998-smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+ vdd-s13-supply = <&vph_pwr>;
+ vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+ vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+ vdd-l6-supply = <&vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l9-supply = <&vreg_bob>;
+ vdd-l10-l23-l25-supply = <&vreg_bob>;
+ vdd-l13-l19-l21-supply = <&vreg_bob>;
+ vdd-l16-l28-supply = <&vreg_bob>;
+ vdd-l18-l22-supply = <&vreg_bob>;
+ vdd-l20-l24-supply = <&vreg_bob>;
+ vdd-l26-supply = <&vreg_s3a_1p35>;
+ vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s2a_1p125: smps2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdd_qusb_hs0:
+ vdda_hp_pcie_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_mipi_dsi1_pll:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vdda_qrefs_0p875:
+ vdda_pcie_core:
+ vdda_pll_cc_ebi01:
+ vdda_pll_cc_ebi23:
+ vdda_sp_sensor:
+ vdda_ufs1_core:
+ vdda_ufs2_core:
+ vdda_usb1_ss_core:
+ vdda_usb2_ss_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_wcss_cx:
+ vdd_wcss_mx:
+ vdda_wcss_pll:
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_13:
+ vreg_l6a_1p8: ldo6 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <1856000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a_1p2: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1248000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p8: ldo9 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_1p0: ldo11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc1_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l13a_2p95: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_2p7: ldo18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19a_3p0: ldo19 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22a_2p85: ldo22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hp_pcie_1p2:
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_mipi_csi_1p25:
+ vdda_mipi_dsi0_1p2:
+ vdda_mipi_dsi1_1p2:
+ vdda_pcie_1p2:
+ vdda_ufs1_1p2:
+ vdda_ufs2_1p2:
+ vdda_usb1_ss_1p2:
+ vdda_usb2_ss_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s3c_0p6: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ };
};
&i2c10 {
status = "okay";
};
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* Until we have Type C hooked up we'll force this as host. */
+ dr_mode = "host";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+ status = "okay";
+};
+
+&usb_2_dwc3 {
+ /*
+ * Though the USB block on SDM845 can support host, there's no vbus
+ * signal for this port on MTP. Thus (unless you have a non-compliant
+ * hub that works without vbus) the only sensible thing is to force
+ * peripheral mode.
+ */
+ dr_mode = "peripheral";
+};
+
+&usb_2_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb2_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
&qup_i2c10_default {
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
/ {
hwlocks = <&tcsr_mutex 3>;
};
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <94>, <432>;
+
+ interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 6>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ cdsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ cdsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-lpass {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
+
+ interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&apss_shared 10>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ adsp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ adsp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-mpss {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 14>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
+ interrupts = <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&apss_shared 26>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
+
+ slpi_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ slpi_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
#power-domain-cells = <1>;
};
+ qfprom@784000 {
+ compatible = "qcom,qfprom";
+ reg = <0x784000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qusb2p_hstx_trim: hstx-trim-primary@1eb {
+ reg = <0x1eb 0x1>;
+ bits = <1 4>;
+ };
+
+ qusb2s_hstx_trim: hstx-trim-secondary@1eb {
+ reg = <0x1eb 0x2>;
+ bits = <6 4>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x8c0000 0x6000>;
};
};
+ usb_1_hsphy: phy@88e2000 {
+ compatible = "qcom,sdm845-qusb2-phy";
+ reg = <0x88e2000 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+ nvmem-cells = <&qusb2p_hstx_trim>;
+ };
+
+ usb_2_hsphy: phy@88e3000 {
+ compatible = "qcom,sdm845-qusb2-phy";
+ reg = <0x88e3000 0x400>;
+ status = "disabled";
+ #phy-cells = <0>;
+
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "cfg_ahb", "ref";
+
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+ nvmem-cells = <&qusb2s_hstx_trim>;
+ };
+
+ usb_1_qmpphy: phy@88e9000 {
+ compatible = "qcom,sdm845-qmp-usb3-phy";
+ reg = <0x88e9000 0x18c>,
+ <0x88e8000 0x10>;
+ reg-names = "reg-base", "dp_com";
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+ <&gcc GCC_USB3_PHY_PRIM_BCR>;
+ reset-names = "phy", "common";
+
+ usb_1_ssphy: lane@88e9200 {
+ reg = <0x88e9200 0x128>,
+ <0x88e9400 0x200>,
+ <0x88e9c00 0x218>,
+ <0x88e9a00 0x100>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ };
+ };
+
+ usb_2_qmpphy: phy@88eb000 {
+ compatible = "qcom,sdm845-qmp-usb3-uni-phy";
+ reg = <0x88eb000 0x18c>;
+ status = "disabled";
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_SEC_CLKREF_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+
+ resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
+ <&gcc GCC_USB3_PHY_SEC_BCR>;
+ reset-names = "phy", "common";
+
+ usb_2_ssphy: lane@88eb200 {
+ reg = <0x88eb200 0x128>,
+ <0x88eb400 0x1fc>,
+ <0x88eb800 0x218>,
+ <0x88e9600 0x70>;
+ #phy-cells = <0>;
+ clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ };
+ };
+
+ usb_1: usb@a6f8800 {
+ compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+ reg = <0xa6f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_PRIM_GDSC>;
+
+ resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+ usb_1_dwc3: dwc3@a600000 {
+ compatible = "snps,dwc3";
+ reg = <0xa600000 0xcd00>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usb_2: usb@a8f8800 {
+ compatible = "qcom,sdm845-dwc3", "qcom,dwc3";
+ reg = <0xa8f8800 0x400>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>,
+ <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_SLEEP_CLK>;
+ clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+ "sleep";
+
+ assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SEC_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <150000000>;
+
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hs_phy_irq", "ss_phy_irq",
+ "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+ power-domains = <&gcc USB30_SEC_GDSC>;
+
+ resets = <&gcc GCC_USB30_SEC_BCR>;
+
+ usb_2_dwc3: dwc3@a800000 {
+ compatible = "snps,dwc3";
+ reg = <0xa800000 0xcd00>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sdm845-dispcc";
+ reg = <0xaf00000 0x10000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
tsens0: thermal-sensor@c263000 {
compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
reg = <0xc263000 0x1ff>, /* TM */
#thermal-sensor-cells = <1>;
};
+ aoss_reset: reset-controller@c2a0000 {
+ compatible = "qcom,sdm845-aoss-cc";
+ reg = <0xc2a0000 0x31000>;
+ #reset-cells = <1>;
+ };
+
spmi_bus: spmi@c440000 {
compatible = "qcom,spmi-pmic-arb";
reg = <0xc440000 0x1100>,
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-m3nulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb
dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774a1 SoC
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/ {
+ compatible = "renesas,r8a774a1";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c_dvfs;
+ };
+
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency
+ * clocks by default.
+ * Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a57_0: cpu@0 {
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x0>;
+ device_type = "cpu";
+ power-domains = <&sysc 0>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE 0>;
+ };
+
+ a57_1: cpu@1 {
+ compatible = "arm,cortex-a57", "arm,armv8";
+ reg = <0x1>;
+ device_type = "cpu";
+ power-domains = <&sysc 1>;
+ next-level-cache = <&L2_CA57>;
+ enable-method = "psci";
+ clocks = <&cpg CPG_CORE 0>;
+ };
+
+ a53_0: cpu@100 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x100>;
+ device_type = "cpu";
+ power-domains = <&sysc 5>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_1: cpu@101 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x101>;
+ device_type = "cpu";
+ power-domains = <&sysc 6>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_2: cpu@102 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x102>;
+ device_type = "cpu";
+ power-domains = <&sysc 7>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ a53_3: cpu@103 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x103>;
+ device_type = "cpu";
+ power-domains = <&sysc 8>;
+ next-level-cache = <&L2_CA53>;
+ enable-method = "psci";
+ clocks =<&cpg CPG_CORE 1>;
+ };
+
+ L2_CA57: cache-controller-0 {
+ compatible = "cache";
+ power-domains = <&sysc 12>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA53: cache-controller-1 {
+ compatible = "cache";
+ power-domains = <&sysc 21>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ extalr_clk: extalr {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board */
+ clock-frequency = <0>;
+ };
+
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+ };
+
+ pmu_a57 {
+ compatible = "arm,cortex-a57-pmu";
+ interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a57_0>, <&a57_1>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0", "arm,psci-0.2";
+ method = "smc";
+ };
+
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a774a1-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@e6050000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6050000 0 0x50>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 912>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 912>;
+ };
+
+ gpio1: gpio@e6051000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6051000 0 0x50>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 29>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 911>;
+ };
+
+ gpio2: gpio@e6052000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6052000 0 0x50>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 15>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 910>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 910>;
+ };
+
+ gpio3: gpio@e6053000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6053000 0 0x50>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 909>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 909>;
+ };
+
+ gpio4: gpio@e6054000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6054000 0 0x50>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 18>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 908>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 908>;
+ };
+
+ gpio5: gpio@e6055000 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055000 0 0x50>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 26>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 907>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 907>;
+ };
+
+ gpio6: gpio@e6055400 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055400 0 0x50>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 906>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 906>;
+ };
+
+ gpio7: gpio@e6055800 {
+ compatible = "renesas,gpio-r8a774a1",
+ "renesas,rcar-gen3-gpio";
+ reg = <0 0xe6055800 0 0x50>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 224 4>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 905>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 905>;
+ };
+
+ pfc: pin-controller@e6060000 {
+ compatible = "renesas,pfc-r8a774a1";
+ reg = <0 0xe6060000 0 0x50c>;
+ };
+
+ cpg: clock-controller@e6150000 {
+ compatible = "renesas,r8a774a1-cpg-mssr";
+ reg = <0 0xe6150000 0 0x0bb0>;
+ clocks = <&extal_clk>, <&extalr_clk>;
+ clock-names = "extal", "extalr";
+ #clock-cells = <2>;
+ #power-domain-cells = <0>;
+ #reset-cells = <1>;
+ };
+
+ rst: reset-controller@e6160000 {
+ compatible = "renesas,r8a774a1-rst";
+ reg = <0 0xe6160000 0 0x018c>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a774a1-sysc";
+ reg = <0 0xe6180000 0 0x0400>;
+ #power-domain-cells = <1>;
+ };
+
+ tsc: thermal@e6198000 {
+ compatible = "renesas,r8a774a1-thermal";
+ reg = <0 0xe6198000 0 0x100>,
+ <0 0xe61a0000 0 0x100>,
+ <0 0xe61a8000 0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 522>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 522>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ intc_ex: interrupt-controller@e61c0000 {
+ compatible = "renesas,intc-ex-r8a774a1", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 407>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 407>;
+ };
+
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 931>;
+ dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+ <&dmac2 0x91>, <&dmac2 0x90>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 930>;
+ dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+ <&dmac2 0x93>, <&dmac2 0x92>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 929>;
+ dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+ <&dmac2 0x95>, <&dmac2 0x94>;
+ dma-names = "tx", "rx", "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 928>;
+ dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 927>;
+ dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 919>;
+ dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a774a1",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 918>;
+ dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+ dma-names = "tx", "rx";
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c_dvfs: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a774a1",
+ "renesas,rcar-gen3-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 926>;
+ dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ hscif0: serial@e6540000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6540000 0 0x60>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 520>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+ <&dmac2 0x31>, <&dmac2 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 520>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6550000 0 0x60>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+ <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 519>;
+ status = "disabled";
+ };
+
+ hscif2: serial@e6560000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe6560000 0 0x60>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 518>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+ <&dmac2 0x35>, <&dmac2 0x34>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 518>;
+ status = "disabled";
+ };
+
+ hscif3: serial@e66a0000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66a0000 0 0x60>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 517>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 517>;
+ status = "disabled";
+ };
+
+ hscif4: serial@e66b0000 {
+ compatible = "renesas,hscif-r8a774a1",
+ "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0 0xe66b0000 0 0x60>;
+ interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 516>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 516>;
+ status = "disabled";
+ };
+
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a774a1",
+ "renesas,rcar-gen3-usbhs";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 704>;
+ dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+ <&usb_dmac1 0>, <&usb_dmac1 1>;
+ dma-names = "ch0", "ch1", "ch2", "ch3";
+ renesas,buswait = <11>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 704>;
+ status = "disabled";
+ };
+
+ usb_dmac0: dma-controller@e65a0000 {
+ compatible = "renesas,r8a774a1-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65a0000 0 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 330>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 330>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb_dmac1: dma-controller@e65b0000 {
+ compatible = "renesas,r8a774a1-usb-dmac",
+ "renesas,usb-dmac";
+ reg = <0 0xe65b0000 0 0x100>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1";
+ clocks = <&cpg CPG_MOD 331>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 331>;
+ #dma-cells = <1>;
+ dma-channels = <2>;
+ };
+
+ usb3_phy0: usb-phy@e65ee000 {
+ compatible = "renesas,r8a774a1-usb3-phy",
+ "renesas,rcar-gen3-usb3-phy";
+ reg = <0 0xe65ee000 0 0x90>;
+ clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>,
+ <&usb_extal_clk>;
+ clock-names = "usb3-if", "usb3s_clk", "usb_extal";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ ipmmu_ds0: mmu@e6740000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe6740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 0>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ds1: mmu@e7740000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe7740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 1>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_hc: mmu@e6570000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe6570000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 2>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: mmu@e67b0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xe67b0000 0 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mp: mmu@ec670000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xec670000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 4>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_pv0: mmu@fd800000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfd800000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 5>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_pv1: mmu@fd950000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfd950000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 6>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vc0: mmu@fe6b0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfe6b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 8>;
+ power-domains = <&sysc 14>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi0: mmu@febd0000 {
+ compatible = "renesas,ipmmu-r8a774a1";
+ reg = <0 0xfebd0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 9>;
+ power-domains = <&sysc 32>;
+ #iommu-cells = <1>;
+ };
+
+ avb: ethernet@e6800000 {
+ compatible = "renesas,etheravb-r8a774a1",
+ "renesas,etheravb-rcar-gen3";
+ reg = <0 0xe6800000 0 0x800>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&cpg CPG_MOD 812>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 812>;
+ phy-mode = "rgmii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ #pwm-cells = <2>;
+ clocks = <&cpg CPG_MOD 523>;
+ resets = <&cpg 523>;
+ power-domains = <&sysc 32>;
+ status = "disabled";
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 0x40>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 207>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+ <&dmac2 0x51>, <&dmac2 0x50>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 207>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 0x40>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 206>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+ <&dmac2 0x53>, <&dmac2 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 206>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e88000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6e88000 0 0x40>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 310>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6c50000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c50000 0 0x40>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 204>;
+ status = "disabled";
+ };
+
+ scif4: serial@e6c40000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6c40000 0 0x40>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 203>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 203>;
+ status = "disabled";
+ };
+
+ scif5: serial@e6f30000 {
+ compatible = "renesas,scif-r8a774a1",
+ "renesas,rcar-gen3-scif", "renesas,scif";
+ reg = <0 0xe6f30000 0 0x40>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 202>,
+ <&cpg CPG_CORE 19>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+ <&dmac2 0x5b>, <&dmac2 0x5a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 202>;
+ status = "disabled";
+ };
+
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+ <&dmac2 0x41>, <&dmac2 0x40>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+ <&dmac2 0x43>, <&dmac2 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a774a1",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE 10>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
+
+ rcar_sound,dvc {
+ dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
+ };
+ dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
+ };
+ };
+
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
+ rcar_sound,src {
+ src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
+ };
+ src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a774a1",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ xhci0: usb@ee000000 {
+ compatible = "renesas,xhci-r8a774a1",
+ "renesas,rcar-gen3-xhci";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ status = "disabled";
+ };
+
+ usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a774a1-usb3-peri",
+ "renesas,rcar-gen3-usb3-peri";
+ reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 328>;
+ status = "disabled";
+ };
+
+ ohci0: usb@ee080000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee080000 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ohci1: usb@ee0a0000 {
+ compatible = "generic-ohci";
+ reg = <0 0xee0a0000 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ ehci0: usb@ee080100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee080100 0 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ phys = <&usb2_phy0>;
+ phy-names = "usb";
+ companion = <&ohci0>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ status = "disabled";
+ };
+
+ ehci1: usb@ee0a0100 {
+ compatible = "generic-ehci";
+ reg = <0 0xee0a0100 0 0x100>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 702>;
+ phys = <&usb2_phy1>;
+ phy-names = "usb";
+ companion = <&ohci1>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ status = "disabled";
+ };
+
+ usb2_phy0: usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a774a1",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee080200 0 0x700>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 703>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 703>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ usb2_phy1: usb-phy@ee0a0200 {
+ compatible = "renesas,usb2-phy-r8a774a1",
+ "renesas,rcar-gen3-usb2-phy";
+ reg = <0 0xee0a0200 0 0x700>;
+ clocks = <&cpg CPG_MOD 702>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 702>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sdhi0: sd@ee100000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee100000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 314>;
+ status = "disabled";
+ };
+
+ sdhi1: sd@ee120000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee120000 0 0x2000>;
+ interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 313>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 313>;
+ status = "disabled";
+ };
+
+ sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 312>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 312>;
+ status = "disabled";
+ };
+
+ sdhi3: sd@ee160000 {
+ compatible = "renesas,sdhi-r8a774a1",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee160000 0 0x2000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 311>;
+ max-frequency = <200000000>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 311>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@f1010000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xf1010000 0 0x1000>,
+ <0x0 0xf1020000 0 0x20000>,
+ <0x0 0xf1040000 0 0x20000>,
+ <0x0 0xf1060000 0 0x20000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ clocks = <&cpg CPG_MOD 408>;
+ clock-names = "clk";
+ power-domains = <&sysc 32>;
+ resets = <&cpg 408>;
+ };
+
+ fcpf0: fcp@fe950000 {
+ compatible = "renesas,fcpf";
+ reg = <0 0xfe950000 0 0x200>;
+ clocks = <&cpg CPG_MOD 615>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 615>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 607>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
+ };
+
+ fcpvd2: fcp@fea37000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea37000 0 0x200>;
+ clocks = <&cpg CPG_MOD 601>;
+ power-domains = <&sysc 32>;
+ resets = <&cpg 601>;
+ iommus = <&ipmmu_vi0 10>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc 14>;
+ resets = <&cpg 611>;
+ iommus = <&ipmmu_vc0 19>;
+ };
+
+ prr: chipid@fff00044 {
+ compatible = "renesas,prr";
+ reg = <0 0xfff00044 0 4>;
+ };
+ };
+
+ thermal-zones {
+ sensor_thermal1: sensor-thermal1 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 0>;
+
+ trips {
+ sensor1_crit: sensor1-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ sensor_thermal2: sensor-thermal2 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 1>;
+
+ trips {
+ sensor2_crit: sensor2-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ };
+
+ sensor_thermal3: sensor-thermal3 {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&tsc 2>;
+
+ trips {
+ sensor3_crit: sensor3-crit {
+ temperature = <120000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ /* External USB clocks - can be overridden by the board */
+ usb3s0_clk: usb3s0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ usb_extal_clk: usb_extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+};
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7795 ES1.x SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) ES1.x SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*/
port@1 {
vin0csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin0>;
+ remote-endpoint = <&csi21vin0>;
};
};
};
port@1 {
vin1csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin1>;
+ remote-endpoint = <&csi21vin1>;
};
};
};
port@1 {
vin2csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin2>;
+ remote-endpoint = <&csi21vin2>;
};
};
};
port@1 {
vin3csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin3>;
+ remote-endpoint = <&csi21vin3>;
};
};
};
port@1 {
vin4csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin4>;
+ remote-endpoint = <&csi21vin4>;
};
};
};
port@1 {
vin5csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin5>;
+ remote-endpoint = <&csi21vin5>;
};
};
};
port@1 {
vin6csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin6>;
+ remote-endpoint = <&csi21vin6>;
};
};
};
port@1 {
vin7csi21: endpoint@1 {
reg = <1>;
- remote-endpoint= <&csi21vin7>;
+ remote-endpoint = <&csi21vin7>;
};
};
};
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&versaclock5 3>,
<&versaclock5 4>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
<&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>,
<&versaclock6 1>,
<&x21_clk>,
<&x22_clk>,
<&versaclock6 2>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2", "du.3",
"dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
};
};
};
+&pca9654 {
+ pcie_sata_switch {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
&pfc {
usb2_pins: usb2 {
groups = "usb2";
};
};
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+&sata {
+ status = "okay";
+};
+
&usb2_phy2 {
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7795 SoC
+ * Device Tree Source for the R-Car H3 (R8A77950) SoC
*
* Copyright (C) 2015 Renesas Electronics Corp.
*/
power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7795_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7795_PD_CA57_CPU2>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7795_PD_CA57_CPU3>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7795_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7795_PD_CA53_CPU2>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7795_PD_CA53_CPU3>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
status = "disabled";
};
- arm_cc630p: crypto@e6601000 {
- compatible = "arm,cryptocell-630p-ree";
- interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0xe6601000 0 0x1000>;
- clocks = <&cpg CPG_MOD 229>;
- resets = <&cpg 229>;
- power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- };
-
i2c3: i2c@e66d0000 {
#address-cells = <1>;
#size-cells = <0>;
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
"renesas,rcar-gen3-usbhs";
reg = <0 0xe659c000 0 0x100>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 705>;
+ clocks = <&cpg CPG_MOD 705>, <&cpg CPG_MOD 700>;
dmas = <&usb_dmac2 0>, <&usb_dmac2 1>,
<&usb_dmac3 0>, <&usb_dmac3 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
phys = <&usb2_phy3>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 705>;
+ resets = <&cpg 705>, <&cpg 700>;
status = "disabled";
};
status = "disabled";
};
+ arm_cc630p: crypto@e6601000 {
+ compatible = "arm,cryptocell-630p-ree";
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0xe6601000 0 0x1000>;
+ clocks = <&cpg CPG_MOD 229>;
+ resets = <&cpg 229>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7795",
"renesas,rcar-dmac";
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin4>;
+ remote-endpoint = <&csi41vin4>;
};
};
};
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin5>;
+ remote-endpoint = <&csi41vin5>;
};
};
};
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin6>;
+ remote-endpoint = <&csi41vin6>;
};
};
};
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi41: endpoint@3 {
reg = <3>;
- remote-endpoint= <&csi41vin7>;
+ remote-endpoint = <&csi41vin7>;
};
};
};
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ohci";
reg = <0 0xee0e0000 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
phys = <&usb2_phy3>;
phy-names = "usb";
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee0e0100 0 0x100>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
phys = <&usb2_phy3>;
phy-names = "usb";
companion = <&ohci3>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0e0200 0 0x700>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 700>;
+ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
- resets = <&cpg 700>;
+ resets = <&cpg 700>, <&cpg 705>;
#phy-cells = <0>;
status = "disabled";
};
du: display@feb00000 {
compatible = "renesas,du-r8a7795";
- reg = <0 0xfeb00000 0 0x80000>,
- <0 0xfeb90000 0 0x14>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x80000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 721>,
- <&cpg CPG_MOD 727>;
- clock-names = "du.0", "du.1", "du.2", "du.3", "lvds.0";
+ <&cpg CPG_MOD 721>;
+ clock-names = "du.0", "du.1", "du.2", "du.3";
vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>;
status = "disabled";
port@3 {
reg = <3>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7795-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&versaclock5 3>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>,
<&versaclock5 1>,
<&x21_clk>,
<&versaclock5 2>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0",
+ clock-names = "du.0", "du.1", "du.2",
"dclkin.0", "dclkin.1", "dclkin.2";
};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a7796 SoC
+ * Device Tree Source for the R-Car M3-W (R8A77960) SoC
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
*/
power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7796_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
operating-points-v2 = <&cluster0_opp>;
#cooling-cells = <2>;
};
power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7796_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7796_PD_CA53_CPU2>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7796_PD_CA53_CPU3>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
- clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>;
+ clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
operating-points-v2 = <&cluster1_opp>;
};
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin6>;
+ remote-endpoint = <&csi40vin6>;
};
};
};
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin7>;
+ remote-endpoint = <&csi40vin7>;
};
};
};
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
- companion= <&ohci0>;
+ companion = <&ohci0>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
- companion= <&ohci1>;
+ companion = <&ohci1>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
du: display@feb00000 {
compatible = "renesas,du-r8a7796";
- reg = <0 0xfeb00000 0 0x70000>,
- <0 0xfeb90000 0 0x14>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x70000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 727>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0";
+ <&cpg CPG_MOD 722>;
+ clock-names = "du.0", "du.1", "du.2";
status = "disabled";
vsps = <&vspd0 &vspd1 &vspd2>;
port@2 {
reg = <2>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7796-lvds";
+ reg = <0 0xfeb90000 0 0x14>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB Kingfisher board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+#include "r8a77965-m3nulcb.dts"
+#include "ulcb-kf.dtsi"
+
+/ {
+ model = "Renesas M3NULCB Kingfisher board based on r8a77965";
+ compatible = "shimafuji,kingfisher", "renesas,m3nulcb",
+ "renesas,r8a77965";
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the M3NULCB (R-Car Starter Kit Pro) board
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ * Copyright (C) 2018 Cogent Embedded, Inc.
+ */
+
+/dts-v1/;
+#include "r8a77965.dtsi"
+#include "ulcb.dtsi"
+
+/ {
+ model = "Renesas M3NULCB board based on r8a77965";
+ compatible = "renesas,m3nulcb", "renesas,r8a77965";
+
+ memory@48000000 {
+ device_type = "memory";
+ /* first 128MB is reserved for secure area. */
+ reg = <0x0 0x48000000 0x0 0x78000000>;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&cpg CPG_MOD 721>,
+ <&versaclock5 1>,
+ <&versaclock5 3>,
+ <&versaclock5 2>;
+ clock-names = "du.0", "du.1", "du.3",
+ "dclkin.0", "dclkin.1", "dclkin.3";
+};
&hdmi0_con {
remote-endpoint = <&rcar_dw_hdmi0_out>;
};
+
+&pca9654 {
+ pcie_sata_switch {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low; /* enable SATA by default */
+ line-name = "PCIE/SATA switch";
+ };
+};
+
+/* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */
+&sata {
+ status = "okay";
+};
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77965 SoC
+ * Device Tree Source for the R-Car M3-N (R8A77965) SoC
*
* Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
*
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77965-sysc.h>
-#define CPG_AUDIO_CLK_I 10
+#define CPG_AUDIO_CLK_I R8A77965_CLK_S0D4
/ {
compatible = "renesas,r8a77965";
clock-frequency = <0>;
};
+ cluster0_opp: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ };
+ opp-1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <830000>;
+ clock-latency-ns = <300000>;
+ opp-suspend;
+ };
+ opp-1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ opp-1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <900000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ opp-1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <960000>;
+ clock-latency-ns = <300000>;
+ turbo-mode;
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+ operating-points-v2 = <&cluster0_opp>;
};
a57_1: cpu@1 {
power-domains = <&sysc R8A77965_PD_CA57_CPU1>;
next-level-cache = <&L2_CA57>;
enable-method = "psci";
+ clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
+ operating-points-v2 = <&cluster0_opp>;
};
L2_CA57: cache-controller-0 {
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
resets = <&cpg 522>;
#thermal-sensor-cells = <1>;
- status = "okay";
};
intc_ex: interrupt-controller@e61c0000 {
};
hsusb: usb@e6590000 {
- compatible = "renesas,usbhs-r8a7796",
+ compatible = "renesas,usbhs-r8a77965",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 704>;
+ clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 704>;
+ resets = <&cpg 704>, <&cpg 703>;
status = "disabled";
};
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
};
dmac1: dma-controller@e7300000 {
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
};
dmac2: dma-controller@e7310000 {
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
ipmmu_ds0: mmu@e6740000 {
status = "disabled";
};
+ can0: can@e6c30000 {
+ reg = <0 0xe6c30000 0 0x1000>;
+ /* placeholder */
+ };
+
+ can1: can@e6c38000 {
+ reg = <0 0xe6c38000 0 0x1000>;
+ /* placeholder */
+ };
+
pwm0: pwm@e6e30000 {
compatible = "renesas,pwm-r8a77965", "renesas,pwm-rcar";
reg = <0 0xe6e30000 0 8>;
vin0csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin0>;
+ remote-endpoint = <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
vin1csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin1>;
+ remote-endpoint = <&csi20vin1>;
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
vin2csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin2>;
+ remote-endpoint = <&csi20vin2>;
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
vin3csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin3>;
+ remote-endpoint = <&csi20vin3>;
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
vin4csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin4>;
+ remote-endpoint = <&csi20vin4>;
};
vin4csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin4>;
+ remote-endpoint = <&csi40vin4>;
};
};
};
vin5csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin5>;
+ remote-endpoint = <&csi20vin5>;
};
vin5csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin5>;
+ remote-endpoint = <&csi40vin5>;
};
};
};
vin6csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin6>;
+ remote-endpoint = <&csi20vin6>;
};
vin6csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin6>;
+ remote-endpoint = <&csi40vin6>;
};
};
};
vin7csi20: endpoint@0 {
reg = <0>;
- remote-endpoint= <&csi20vin7>;
+ remote-endpoint = <&csi20vin7>;
};
vin7csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin7>;
+ remote-endpoint = <&csi40vin7>;
};
};
};
};
rcar_sound: sound@ec500000 {
+ /*
+ * #sound-dai-cells is required
+ *
+ * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+ * Multi DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+ */
+ /*
+ * #clock-cells is required for audio_clkout0/1/2/3
+ *
+ * clkout : #clock-cells = <0>; <&rcar_sound>;
+ * clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
+ */
+ compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
reg = <0 0xec500000 0 0x1000>, /* SCU */
<0 0xec5a0000 0 0x100>, /* ADG */
<0 0xec540000 0 0x1000>, /* SSIU */
<0 0xec541000 0 0x280>, /* SSI */
<0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/
- /* placeholder */
+ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&audio_clk_c>,
+ <&cpg CPG_CORE R8A77965_CLK_S0D4>;
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_c", "clk_i";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 1005>,
+ <&cpg 1006>, <&cpg 1007>,
+ <&cpg 1008>, <&cpg 1009>,
+ <&cpg 1010>, <&cpg 1011>,
+ <&cpg 1012>, <&cpg 1013>,
+ <&cpg 1014>, <&cpg 1015>;
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
+ status = "disabled";
rcar_sound,dvc {
dvc0: dvc-0 {
+ dmas = <&audma1 0xbc>;
+ dma-names = "tx";
};
dvc1: dvc-1 {
+ dmas = <&audma1 0xbe>;
+ dma-names = "tx";
};
};
+ rcar_sound,mix {
+ mix0: mix-0 { };
+ mix1: mix-1 { };
+ };
+
+ rcar_sound,ctu {
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
+ };
+
rcar_sound,src {
src0: src-0 {
+ interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x85>, <&audma1 0x9a>;
+ dma-names = "rx", "tx";
};
src1: src-1 {
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x87>, <&audma1 0x9c>;
+ dma-names = "rx", "tx";
+ };
+ src2: src-2 {
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x89>, <&audma1 0x9e>;
+ dma-names = "rx", "tx";
+ };
+ src3: src-3 {
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+ dma-names = "rx", "tx";
+ };
+ src4: src-4 {
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+ dma-names = "rx", "tx";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma1 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x93>, <&audma1 0xb6>;
+ dma-names = "rx", "tx";
+ };
+ src8: src-8 {
+ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x95>, <&audma1 0xb8>;
+ dma-names = "rx", "tx";
+ };
+ src9: src-9 {
+ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x97>, <&audma1 0xba>;
+ dma-names = "rx", "tx";
};
};
rcar_sound,ssi {
ssi0: ssi-0 {
+ interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
ssi1: ssi-1 {
+ interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
- };
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
+ ssi2: ssi-2 {
+ interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
- port@1 {
- reg = <1>;
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi5: ssi-5 {
+ interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi6: ssi-6 {
+ interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi7: ssi-7 {
+ interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi8: ssi-8 {
+ interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
+ dma-names = "rx", "tx", "rxu", "txu";
+ };
+ ssi9: ssi-9 {
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
+ dma-names = "rx", "tx", "rxu", "txu";
};
};
};
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,dmac-r8a77965",
+ "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 502>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 502>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,dmac-r8a77965",
+ "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 501>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 501>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ };
+
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a77965",
"renesas,rcar-gen3-xhci";
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
compatible = "renesas,usb2-phy-r8a77965",
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 702>;
#phy-cells = <0>;
status = "disabled";
};
status = "disabled";
};
+ sata: sata@ee300000 {
+ compatible = "renesas,sata-r8a77965",
+ "renesas,rcar-gen3-sata";
+ reg = <0 0xee300000 0 0x200000>;
+ interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 815>;
+ power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+ resets = <&cpg 815>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
status = "disabled";
};
+ fdp1@fe940000 {
+ compatible = "renesas,fdp1";
+ reg = <0 0xfe940000 0 0x2400>;
+ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 119>;
+ power-domains = <&sysc R8A77965_PD_A3VP>;
+ resets = <&cpg 119>;
+ renesas,fcp = <&fcpf0>;
+ };
+
fcpf0: fcp@fe950000 {
compatible = "renesas,fcpf";
reg = <0 0xfe950000 0 0x200>;
};
};
- timer {
- compatible = "arm,armv8-timer";
- interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
thermal-zones {
sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>;
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
/* External USB clocks - can be overridden by the board */
usb3s0_clk: usb3s0 {
compatible = "fixed-clock";
regulator-always-on;
};
+ vcc_vddq_vin0: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_VDDQ_VIN0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&vcc_d3_3v>;
function = "i2c0";
};
+ mmc_pins: mmc_3_3v {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <3300>;
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
};
};
+&mmc0 {
+ pinctrl-0 = <&mmc_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vcc_d3_3v>;
+ vqmmc-supply = <&vcc_vddq_vin0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77970 SoC
+ * Device Tree Source for the R-Car V3M (R8A77970) SoC
*
* Copyright (C) 2016-2017 Renesas Electronics Corp.
* Copyright (C) 2017 Cogent Embedded, Inc.
i2c4 = &i2c4;
};
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
method = "smc";
};
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <0>;
- };
-
/* External SCIF clock - to be overridden by boards that provide it */
scif_clk: scif {
compatible = "fixed-clock";
reg = <0 0xe6060000 0 0x504>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77970-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77970-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77970-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a77970", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a77970";
vin0csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin0>;
+ remote-endpoint = <&csi40vin0>;
};
};
};
vin1csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin1>;
+ remote-endpoint = <&csi40vin1>;
};
};
};
vin2csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin2>;
+ remote-endpoint = <&csi40vin2>;
};
};
};
vin3csi40: endpoint@2 {
reg = <2>;
- remote-endpoint= <&csi40vin3>;
+ remote-endpoint = <&csi40vin3>;
};
};
};
#iommu-cells = <1>;
};
+ mmc0: mmc@ee140000 {
+ compatible = "renesas,sdhi-r8a77970",
+ "renesas,rcar-gen3-sdhi";
+ reg = <0 0xee140000 0 0x2000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 314>;
+ power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+ resets = <&cpg 314>;
+ max-frequency = <200000000>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@f1010000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
regulator-boot-on;
regulator-always-on;
};
+
+ d1_8v: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "D1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&d3_3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ x1_clk: x1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
};
&avb {
};
};
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&x1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
+};
+
&extal_clk {
clock-frequency = <16666666>;
};
gpio-controller;
#gpio-cells = <2>;
};
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&d1_8v>;
+ dvdd-supply = <&d1_8v>;
+ pvdd-supply = <&d1_8v>;
+ bgvdd-supply = <&d1_8v>;
+ dvdd-3v-supply = <&d3_3v>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
};
&mmc0 {
status = "okay";
};
+&pciec {
+ status = "okay";
+};
+
+&pcie_bus_clk {
+ clock-frequency = <100000000>;
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pfc {
avb_pins: avb {
groups = "avb_mdio", "avb_rgmii";
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
pinctrl-names = "default";
/* first 128MB is reserved for secure area. */
reg = <0 0x48000000 0 0x78000000>;
};
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <&vcc3v3_d5>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ osc1_clk: osc1-clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <148500000>;
+ };
+
+ vcc1v8_d4: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8_D4";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc3v3_d5: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3_D5";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&du {
+ clocks = <&cpg CPG_MOD 724>,
+ <&osc1_clk>;
+ clock-names = "du.0", "dclkin.0";
+ status = "okay";
};
&extal_clk {
};
};
+&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ hdmi@39 {
+ compatible = "adi,adv7511w";
+ #sound-dai-cells = <0>;
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+ avdd-supply = <&vcc1v8_d4>;
+ dvdd-supply = <&vcc1v8_d4>;
+ pvdd-supply = <&vcc1v8_d4>;
+ bgvdd-supply = <&vcc1v8_d4>;
+ dvdd-3v-supply = <&vcc3v3_d5>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
&pfc {
gether_pins: gether {
groups = "gether_mdio_a", "gether_rgmii",
function = "gether";
};
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
};
};
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
+};
+
&scif0 {
pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77980 SoC
+ * Device Tree Source for the R-Car V3H (R8A77980) SoC
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
i2c5 = &i2c5;
};
+ /* External CAN clock - to be overridden by boards that provide it */
+ can_clk: can {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
};
};
- /* External CAN clock - to be overridden by boards that provide it */
- can_clk: can {
+ extal_clk: extal {
compatible = "fixed-clock";
#clock-cells = <0>;
+ /* This value must be overridden by the board */
clock-frequency = <0>;
};
- extal_clk: extal {
+ extalr_clk: extalr {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by the board */
clock-frequency = <0>;
};
- extalr_clk: extalr {
+ /* External PCIe clock - can be overridden by the board */
+ pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
- /* This value must be overridden by the board */
clock-frequency = <0>;
};
+ pmu_a53 {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
#size-cells = <2>;
ranges;
+ rwdt: watchdog@e6020000 {
+ compatible = "renesas,r8a77980-wdt",
+ "renesas,rcar-gen3-wdt";
+ reg = <0 0xe6020000 0 0x0c>;
+ clocks = <&cpg CPG_MOD 402>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 402>;
+ status = "disabled";
+ };
+
gpio0: gpio@e6050000 {
compatible = "renesas,gpio-r8a77980",
"renesas,rcar-gen3-gpio";
reg = <0 0xe6060000 0 0x50c>;
};
+ cmt0: timer@e60f0000 {
+ compatible = "renesas,r8a77980-cmt0",
+ "renesas,rcar-gen3-cmt0";
+ reg = <0 0xe60f0000 0 0x1004>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 303>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 303>;
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 302>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 302>;
+ status = "disabled";
+ };
+
+ cmt2: timer@e6140000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6140000 0 0x1004>;
+ interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 301>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 301>;
+ status = "disabled";
+ };
+
+ cmt3: timer@e6148000 {
+ compatible = "renesas,r8a77980-cmt1",
+ "renesas,rcar-gen3-cmt1";
+ reg = <0 0xe6148000 0 0x1004>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 300>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 300>;
+ status = "disabled";
+ };
+
cpg: clock-controller@e6150000 {
compatible = "renesas,r8a77980-cpg-mssr";
reg = <0 0xe6150000 0 0x1000>;
status = "disabled";
};
+ pcie_phy: pcie-phy@e65d0000 {
+ compatible = "renesas,r8a77980-pcie-phy";
+ reg = <0 0xe65d0000 0 0x8000>;
+ #phy-cells = <0>;
+ clocks = <&cpg CPG_MOD 319>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ status = "disabled";
+ };
+
canfd: can@e66c0000 {
compatible = "renesas,r8a77980-canfd",
"renesas,rcar-gen3-canfd";
};
};
- ipmmu_ds1: mmu@e7740000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7740000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 0>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vip0: mmu@e7b00000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7b00000 0 0x1000>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vip1: mmu@e7960000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe7960000 0 0x1000>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_ir: mmu@ff8b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xff8b0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 3>;
- power-domains = <&sysc R8A77980_PD_A3IR>;
- #iommu-cells = <1>;
- };
-
- ipmmu_mm: mmu@e67b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xe67b0000 0 0x1000>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_rt: mmu@ffc80000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xffc80000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 10>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vc0: mmu@fe6b0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xfe6b0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 12>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
- ipmmu_vi0: mmu@febd0000 {
- compatible = "renesas,ipmmu-r8a77980";
- reg = <0 0xfebd0000 0 0x1000>;
- renesas,ipmmu-main = <&ipmmu_mm 14>;
- power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
- #iommu-cells = <1>;
- };
-
avb: ethernet@e6800000 {
compatible = "renesas,etheravb-r8a77980",
"renesas,etheravb-rcar-gen3";
status = "disabled";
};
+ tpu: pwm@e6e80000 {
+ compatible = "renesas,tpu-r8a77980", "renesas,tpu";
+ reg = <0 0xe6e80000 0 0x148>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 304>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 304>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ vin0: video@e6ef0000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef0000 0 0x1000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 811>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 811>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin0csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin0>;
+ };
+ };
+ };
+ };
+
+ vin1: video@e6ef1000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef1000 0 0x1000>;
+ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 810>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ status = "disabled";
+ resets = <&cpg 810>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin1csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin1>;
+ };
+ };
+ };
+ };
+
+ vin2: video@e6ef2000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef2000 0 0x1000>;
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 809>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 809>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin2csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin2>;
+ };
+ };
+ };
+ };
+
+ vin3: video@e6ef3000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef3000 0 0x1000>;
+ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 808>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 808>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin3csi40: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi40vin3>;
+ };
+ };
+ };
+ };
+
+ vin4: video@e6ef4000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin4csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin4>;
+ };
+ };
+ };
+ };
+
+ vin5: video@e6ef5000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin5csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin5>;
+ };
+ };
+ };
+ };
+
+ vin6: video@e6ef6000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef6000 0 0x1000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 805>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 805>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin6csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin6>;
+ };
+ };
+ };
+ };
+
+ vin7: video@e6ef7000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef7000 0 0x1000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 804>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 804>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ vin7csi41: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&csi41vin7>;
+ };
+ };
+ };
+ };
+
+ vin8: video@e6ef8000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef8000 0 0x1000>;
+ interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 628>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 628>;
+ status = "disabled";
+ };
+
+ vin9: video@e6ef9000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6ef9000 0 0x1000>;
+ interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 627>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 627>;
+ status = "disabled";
+ };
+
+ vin10: video@e6efa000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efa000 0 0x1000>;
+ interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 625>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 625>;
+ status = "disabled";
+ };
+
+ vin11: video@e6efb000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efb000 0 0x1000>;
+ interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 618>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 618>;
+ status = "disabled";
+ };
+
+ vin12: video@e6efc000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efc000 0 0x1000>;
+ interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 612>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 612>;
+ status = "disabled";
+ };
+
+ vin13: video@e6efd000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efd000 0 0x1000>;
+ interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 608>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 608>;
+ status = "disabled";
+ };
+
+ vin14: video@e6efe000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6efe000 0 0x1000>;
+ interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 605>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 605>;
+ status = "disabled";
+ };
+
+ vin15: video@e6eff000 {
+ compatible = "renesas,vin-r8a77980";
+ reg = <0 0xe6eff000 0 0x1000>;
+ interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 604>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 604>;
+ status = "disabled";
+ };
+
dmac1: dma-controller@e7300000 {
compatible = "renesas,dmac-r8a77980",
"renesas,rcar-dmac";
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
};
dmac2: dma-controller@e7310000 {
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
};
gether: ethernet@e7400000 {
status = "disabled";
};
+ ipmmu_ds1: mmu@e7740000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7740000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 0>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_ir: mmu@ff8b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xff8b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 3>;
+ power-domains = <&sysc R8A77980_PD_A3IR>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_mm: mmu@e67b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe67b0000 0 0x1000>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_rt: mmu@ffc80000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xffc80000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 10>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vc0: mmu@fe6b0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xfe6b0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 12>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vi0: mmu@febd0000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xfebd0000 0 0x1000>;
+ renesas,ipmmu-main = <&ipmmu_mm 14>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip0: mmu@e7b00000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7b00000 0 0x1000>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
+ ipmmu_vip1: mmu@e7960000 {
+ compatible = "renesas,ipmmu-r8a77980";
+ reg = <0 0xe7960000 0 0x1000>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ #iommu-cells = <1>;
+ };
+
mmc0: mmc@ee140000 {
compatible = "renesas,sdhi-r8a77980",
"renesas,rcar-gen3-sdhi";
resets = <&cpg 408>;
};
+ pciec: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a77980",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xfe000000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <
+ 0x01000000 0 0x00000000 0 0xfe100000 0 0x0100000
+ 0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000
+ 0x02000000 0 0x30000000 0 0x30000000 0 0x8000000
+ 0x42000000 0 0x38000000 0 0x38000000 0 0x8000000
+ >;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000
+ 0 0x80000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148
+ IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
+ phys = <&pcie_phy>;
+ phy-names = "pcie";
+ status = "disabled";
+ };
+
vspd0: vsp@fea20000 {
compatible = "renesas,vsp2";
reg = <0 0xfea20000 0 0x5000>;
resets = <&cpg 603>;
};
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a77980-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi40vin0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin0csi40>;
+ };
+ csi40vin1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin1csi40>;
+ };
+ csi40vin2: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin2csi40>;
+ };
+ csi40vin3: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin3csi40>;
+ };
+ };
+ };
+ };
+
+ csi41: csi2@feab0000 {
+ compatible = "renesas,r8a77980-csi2";
+ reg = <0 0xfeab0000 0 0x10000>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 715>;
+ power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+ resets = <&cpg 715>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi41vin4: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin4csi41>;
+ };
+ csi41vin5: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin5csi41>;
+ };
+ csi41vin6: endpoint@2 {
+ reg = <2>;
+ remote-endpoint = <&vin6csi41>;
+ };
+ csi41vin7: endpoint@3 {
+ reg = <3>;
+ remote-endpoint = <&vin7csi41>;
+ };
+ };
+ };
+ };
+
du: display@feb00000 {
compatible = "renesas,du-r8a77980",
"renesas,du-r8a77970";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ cvbs-in {
+ compatible = "composite-video-connector";
+ label = "CVBS IN";
+
+ port {
+ cvbs_con: endpoint {
+ remote-endpoint = <&adv7482_ain7>;
+ };
+ };
+ };
+
+ hdmi-in {
+ compatible = "hdmi-connector";
+ label = "HDMI IN";
+ type = "a";
+
+ port {
+ hdmi_in_con: endpoint {
+ remote-endpoint = <&adv7482_hdmi>;
+ };
+ };
+ };
+
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
+ };
+ };
+ };
+
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <®_3p3v>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ reg_3p3v: regulator1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ x13_clk: x13 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
+ };
};
&avb {
};
};
+&csi40 {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+
+ csi40_in: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&adv7482_txa>;
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x13_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ };
+};
+
&ehci0 {
status = "okay";
};
clock-frequency = <48000000>;
};
+&i2c0 {
+ status = "okay";
+
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
+ video-receiver@70 {
+ compatible = "adi,adv7482";
+ reg = <0x70>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gpio0>;
+ interrupt-names = "intrq1", "intrq2";
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
+ <17 IRQ_TYPE_LEVEL_LOW>;
+
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
+ };
+
+ port@8 {
+ reg = <8>;
+
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
+ };
+
+ port@a {
+ reg = <0xa>;
+
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi40_in>;
+ };
+ };
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+
+ ports {
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
+ };
+ };
+ };
+};
+
+&lvds1 {
+ clocks = <&cpg CPG_MOD 727>,
+ <&x13_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
+};
+
&ohci0 {
status = "okay";
};
};
};
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ pwm3_pins: pwm3 {
+ groups = "pwm3_b";
+ function = "pwm3";
+ };
+
+ pwm5_pins: pwm5 {
+ groups = "pwm5_a";
+ function = "pwm5";
+ };
+
usb0_pins: usb {
groups = "usb0_b";
function = "usb0";
};
};
+&pwm3 {
+ pinctrl-0 = <&pwm3_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-0 = <&pwm5_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
&rwdt {
timeout-sec = <60>;
status = "okay";
status = "okay";
};
+&vin4 {
+ status = "okay";
+};
+
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Device Tree Source for the r8a77990 SoC
+ * Device Tree Source for the R-Car E3 (R8A77990) SoC
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
-#include <dt-bindings/clock/renesas-cpg-mssr.h>
+#include <dt-bindings/clock/r8a77990-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77990-sysc.h>
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ i2c7 = &i2c7;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
compatible = "arm,cortex-a53", "arm,armv8";
reg = <0>;
device_type = "cpu";
- power-domains = <&sysc 5>;
+ power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
compatible = "arm,cortex-a53", "arm,armv8";
reg = <1>;
device_type = "cpu";
- power-domains = <&sysc 6>;
+ power-domains = <&sysc R8A77990_PD_CA53_CPU1>;
next-level-cache = <&L2_CA53>;
enable-method = "psci";
};
L2_CA53: cache-controller-0 {
compatible = "cache";
- power-domains = <&sysc 21>;
+ power-domains = <&sysc R8A77990_PD_CA53_SCU>;
cache-unified;
cache-level = <2>;
};
method = "smc";
};
+ /* External SCIF clock - to be overridden by boards that provide it */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
soc: soc {
compatible = "simple-bus";
interrupt-parent = <&gic>;
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
clocks = <&cpg CPG_MOD 402>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 402>;
status = "disabled";
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 912>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 912>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 911>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 911>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 910>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 910>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 909>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 909>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 908>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 908>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 907>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 907>;
};
#interrupt-cells = <2>;
interrupt-controller;
clocks = <&cpg CPG_MOD 906>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 906>;
};
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6500000 0 0x40>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 931>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 931>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@e6508000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6508000 0 0x40>;
+ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 930>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 930>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6510000 0 0x40>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 929>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 929>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@e66d0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d0000 0 0x40>;
+ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 928>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 928>;
+ i2c-scl-internal-delay-ns = <110>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@e66d8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66d8000 0 0x40>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 927>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 927>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@e66e0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e0000 0 0x40>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 919>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 919>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@e66e8000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe66e8000 0 0x40>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 918>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 918>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@e6690000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,i2c-r8a77990",
+ "renesas,rcar-gen3-i2c";
+ reg = <0 0xe6690000 0 0x40>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 1003>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 1003>;
+ i2c-scl-internal-delay-ns = <6>;
+ status = "disabled";
+ };
+
pfc: pin-controller@e6060000 {
compatible = "renesas,pfc-r8a77990";
reg = <0 0xe6060000 0 0x508>;
#power-domain-cells = <1>;
};
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x10000>;
+ interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 219>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 219>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+ <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+ <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+ <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+ <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+ };
+
+ dmac1: dma-controller@e7300000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7300000 0 0x10000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 218>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 218>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+ <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+ <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+ <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+ <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+ };
+
+ dmac2: dma-controller@e7310000 {
+ compatible = "renesas,dmac-r8a77990",
+ "renesas,rcar-dmac";
+ reg = <0 0xe7310000 0 0x10000>;
+ interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15";
+ clocks = <&cpg CPG_MOD 217>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 217>;
+ #dma-cells = <1>;
+ dma-channels = <16>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+ <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+ <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+ <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+ <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+ };
+
ipmmu_ds0: mmu@e6740000 {
compatible = "renesas,ipmmu-r8a77990";
reg = <0 0xe6740000 0 0x1000>;
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
#address-cells = <1>;
status = "disabled";
};
+ pwm0: pwm@e6e30000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e30000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@e6e31000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e31000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@e6e32000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e32000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@e6e33000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e33000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@e6e34000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e34000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@e6e35000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e35000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@e6e36000 {
+ compatible = "renesas,pwm-r8a77990", "renesas,pwm-rcar";
+ reg = <0 0xe6e36000 0 0x8>;
+ clocks = <&cpg CPG_MOD 523>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 523>;
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
scif2: serial@e6e88000 {
compatible = "renesas,scif-r8a77990",
"renesas,rcar-gen3-scif", "renesas,scif";
reg = <0 0xe6e88000 0 64>;
interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 310>;
- clock-names = "fck";
- power-domains = <&sysc 32>;
+ clocks = <&cpg CPG_MOD 310>,
+ <&cpg CPG_CORE R8A77990_CLK_S3D1C>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 310>;
status = "disabled";
};
+ msiof0: spi@e6e90000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6e90000 0 0x0064>;
+ interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 211>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 211>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof1: spi@e6ea0000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6ea0000 0 0x0064>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 210>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 210>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof2: spi@e6c00000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c00000 0 0x0064>;
+ interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 209>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 209>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ msiof3: spi@e6c10000 {
+ compatible = "renesas,msiof-r8a77990",
+ "renesas,rcar-gen3-msiof";
+ reg = <0 0xe6c10000 0 0x0064>;
+ interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 208>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 208>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ vin4: video@e6ef4000 {
+ compatible = "renesas,vin-r8a77990";
+ reg = <0 0xe6ef4000 0 0x1000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 807>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 807>;
+ renesas,id = <4>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ vin4csi40: endpoint {
+ remote-endpoint= <&csi40vin4>;
+ };
+ };
+ };
+ };
+
+ vin5: video@e6ef5000 {
+ compatible = "renesas,vin-r8a77990";
+ reg = <0 0xe6ef5000 0 0x1000>;
+ interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 806>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 806>;
+ renesas,id = <5>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ reg = <1>;
+
+ vin5csi40: endpoint {
+ remote-endpoint= <&csi40vin5>;
+ };
+ };
+ };
+ };
+
xhci0: usb@ee000000 {
compatible = "renesas,xhci-r8a77990",
"renesas,rcar-gen3-xhci";
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
- power-domains = <&sysc 32>;
- resets = <&cpg 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
clocks = <&cpg CPG_MOD 408>;
clock-names = "clk";
- power-domains = <&sysc 32>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
resets = <&cpg 408>;
};
+ vspb0: vsp@fe960000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe960000 0 0x8000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 626>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 626>;
+ renesas,fcp = <&fcpvb0>;
+ };
+
+ fcpvb0: fcp@fe96f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe96f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 607>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 607>;
+ iommus = <&ipmmu_vp0 5>;
+ };
+
+ vspi0: vsp@fe9a0000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfe9a0000 0 0x8000>;
+ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 631>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 631>;
+ renesas,fcp = <&fcpvi0>;
+ };
+
+ fcpvi0: fcp@fe9af000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfe9af000 0 0x200>;
+ clocks = <&cpg CPG_MOD 611>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 611>;
+ iommus = <&ipmmu_vp0 8>;
+ };
+
+ vspd0: vsp@fea20000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea20000 0 0x7000>;
+ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 623>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 623>;
+ renesas,fcp = <&fcpvd0>;
+ };
+
+ fcpvd0: fcp@fea27000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea27000 0 0x200>;
+ clocks = <&cpg CPG_MOD 603>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 603>;
+ iommus = <&ipmmu_vi0 8>;
+ };
+
+ vspd1: vsp@fea28000 {
+ compatible = "renesas,vsp2";
+ reg = <0 0xfea28000 0 0x7000>;
+ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 622>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 622>;
+ renesas,fcp = <&fcpvd1>;
+ };
+
+ fcpvd1: fcp@fea2f000 {
+ compatible = "renesas,fcpv";
+ reg = <0 0xfea2f000 0 0x200>;
+ clocks = <&cpg CPG_MOD 602>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 602>;
+ iommus = <&ipmmu_vi0 9>;
+ };
+
+ csi40: csi2@feaa0000 {
+ compatible = "renesas,r8a77990-csi2", "renesas,rcar-gen3-csi2";
+ reg = <0 0xfeaa0000 0 0x10000>;
+ interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 716>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 716>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg = <1>;
+
+ csi40vin4: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vin4csi40>;
+ };
+ csi40vin5: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vin5csi40>;
+ };
+ };
+ };
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a77990";
+ reg = <0 0xfeb00000 0 0x80000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
+ vsps = <&vspd0 0 &vspd1 0>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder@feb90000 {
+ compatible = "renesas,r8a77990-lvds";
+ reg = <0 0xfeb90000 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds-encoder@feb90100 {
+ compatible = "renesas,r8a77990-lvds";
+ reg = <0 0xfeb90100 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
+ };
+ };
+ };
+ };
+
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;
/*
* Device Tree Source for the Draak board
*
- * Copyright (C) 2016 Renesas Electronics Corp.
+ * Copyright (C) 2016-2018 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
*/
stdout-path = "serial0:115200n8";
};
- vga {
- compatible = "vga-connector";
+ composite-in {
+ compatible = "composite-video-connector";
port {
- vga_in: endpoint {
- remote-endpoint = <&adv7123_out>;
+ composite_con_in: endpoint {
+ remote-endpoint = <&adv7180_in>;
};
};
};
- vga-encoder {
- compatible = "adi,adv7123";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ hdmi-in {
+ compatible = "hdmi-connector";
+ type = "a";
- port@0 {
- reg = <0>;
- adv7123_in: endpoint {
- remote-endpoint = <&du_out_rgb>;
- };
- };
- port@1 {
- reg = <1>;
- adv7123_out: endpoint {
- remote-endpoint = <&vga_in>;
- };
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&adv7612_in>;
};
};
};
- composite-in {
- compatible = "composite-video-connector";
+ hdmi-out {
+ compatible = "hdmi-connector";
+ type = "a";
port {
- composite_con_in: endpoint {
- remote-endpoint = <&adv7180_in>;
+ hdmi_con_out: endpoint {
+ remote-endpoint = <&adv7511_out>;
};
};
};
- hdmi-in {
- compatible = "hdmi-connector";
- type = "a";
+ lvds-decoder {
+ compatible = "thine,thc63lvd1024";
+ vcc-supply = <®_3p3v>;
- port {
- hdmi_con_in: endpoint {
- remote-endpoint = <&adv7612_in>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ thc63lvd1024_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ thc63lvd1024_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
};
};
};
regulator-always-on;
};
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <74250000>;
- };
-};
-
-&extal_clk {
- clock-frequency = <48000000>;
-};
+ vga {
+ compatible = "vga-connector";
-&pfc {
- avb0_pins: avb {
- mux {
- groups = "avb0_link", "avb0_mdio", "avb0_mii";
- function = "avb0";
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
};
};
- du_pins: du {
- groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
- function = "du";
- };
+ vga-encoder {
+ compatible = "adi,adv7123";
- i2c0_pins: i2c0 {
- groups = "i2c0";
- function = "i2c0";
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- i2c1_pins: i2c1 {
- groups = "i2c1";
- function = "i2c1";
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
};
- pwm0_pins: pwm0 {
- groups = "pwm0_c";
- function = "pwm0";
+ x12_clk: x12 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <74250000>;
};
+};
- pwm1_pins: pwm1 {
- groups = "pwm1_c";
- function = "pwm1";
- };
+&avb {
+ pinctrl-0 = <&avb0_pins>;
+ pinctrl-names = "default";
+ renesas,no-ether-link;
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-txid";
+ status = "okay";
- scif2_pins: scif2 {
- groups = "scif2_data";
- function = "scif2";
+ phy0: ethernet-phy@0 {
+ rxc-skew-ps = <1500>;
+ reg = <0>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
};
+};
- sdhi2_pins: sd2 {
- groups = "mmc_data8", "mmc_ctrl";
- function = "mmc";
- power-source = <1800>;
- };
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
- sdhi2_pins_uhs: sd2_uhs {
- groups = "mmc_data8", "mmc_ctrl";
- function = "mmc";
- power-source = <1800>;
- };
+ clocks = <&cpg CPG_MOD 724>,
+ <&cpg CPG_MOD 723>,
+ <&x12_clk>;
+ clock-names = "du.0", "du.1", "dclkin.0";
- usb0_pins: usb0 {
- groups = "usb0";
- function = "usb0";
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
};
+};
- vin4_pins_cvbs: vin4 {
- groups = "vin4_data8", "vin4_sync", "vin4_clk";
- function = "vin4";
- };
+&ehci0 {
+ status = "okay";
+};
+
+&extal_clk {
+ clock-frequency = <48000000>;
};
&i2c0 {
pinctrl-names = "default";
status = "okay";
- eeprom@50 {
- compatible = "rohm,br24t01", "atmel,24c01";
- reg = <0x50>;
- pagesize = <8>;
- };
-
composite-in@20 {
compatible = "adi,adv7180cp";
reg = <0x20>;
};
+ hdmi-encoder@39 {
+ compatible = "adi,adv7511w";
+ reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
+ reg-names = "main", "edid", "packet", "cec";
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+
+ /* Depends on LVDS */
+ max-clock = <135000000>;
+ min-vrefresh = <50>;
+
+ adi,input-depth = <8>;
+ adi,input-colorspace = "rgb";
+ adi,input-clock = "1x";
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7511_in: endpoint {
+ remote-endpoint = <&thc63lvd1024_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ adv7511_out: endpoint {
+ remote-endpoint = <&hdmi_con_out>;
+ };
+ };
+ };
+ };
+
hdmi-decoder@4c {
compatible = "adi,adv7612";
reg = <0x4c>;
};
};
};
+
+ eeprom@50 {
+ compatible = "rohm,br24t01", "atmel,24c01";
+ reg = <0x50>;
+ pagesize = <8>;
+ };
};
&i2c1 {
status = "okay";
};
-&du {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
+&lvds0 {
status = "okay";
- clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&x12_clk>;
- clock-names = "du.0", "du.1", "dclkin.0";
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
ports {
- port@0 {
- endpoint {
- remote-endpoint = <&adv7123_in>;
+ port@1 {
+ lvds0_out: endpoint {
+ remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
-&ehci0 {
- status = "okay";
+&lvds1 {
+ clocks = <&cpg CPG_MOD 727>,
+ <&x12_clk>,
+ <&extal_clk>;
+ clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
status = "okay";
};
-&avb {
- pinctrl-0 = <&avb0_pins>;
+&pfc {
+ avb0_pins: avb {
+ mux {
+ groups = "avb0_link", "avb0_mdio", "avb0_mii";
+ function = "avb0";
+ };
+ };
+
+ du_pins: du {
+ groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
+ function = "du";
+ };
+
+ i2c0_pins: i2c0 {
+ groups = "i2c0";
+ function = "i2c0";
+ };
+
+ i2c1_pins: i2c1 {
+ groups = "i2c1";
+ function = "i2c1";
+ };
+
+ pwm0_pins: pwm0 {
+ groups = "pwm0_c";
+ function = "pwm0";
+ };
+
+ pwm1_pins: pwm1 {
+ groups = "pwm1_c";
+ function = "pwm1";
+ };
+
+ scif2_pins: scif2 {
+ groups = "scif2_data";
+ function = "scif2";
+ };
+
+ sdhi2_pins: sd2 {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ sdhi2_pins_uhs: sd2_uhs {
+ groups = "mmc_data8", "mmc_ctrl";
+ function = "mmc";
+ power-source = <1800>;
+ };
+
+ usb0_pins: usb0 {
+ groups = "usb0";
+ function = "usb0";
+ };
+
+ vin4_pins_cvbs: vin4 {
+ groups = "vin4_data8", "vin4_sync", "vin4_clk";
+ function = "vin4";
+ };
+};
+
+&pwm0 {
+ pinctrl-0 = <&pwm0_pins>;
pinctrl-names = "default";
- renesas,no-ether-link;
- phy-handle = <&phy0>;
- phy-mode = "rgmii-txid";
+
status = "okay";
+};
- phy0: ethernet-phy@0 {
- rxc-skew-ps = <1500>;
- reg = <0>;
- interrupt-parent = <&gpio5>;
- interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
- };
+&pwm1 {
+ pinctrl-0 = <&pwm1_pins>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&rwdt {
+ timeout-sec = <60>;
+ status = "okay";
};
&scif2 {
status = "okay";
};
-&pwm0 {
- pinctrl-0 = <&pwm0_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&pwm1 {
- pinctrl-0 = <&pwm1_pins>;
- pinctrl-names = "default";
-
- status = "okay";
-};
-
-&rwdt {
- timeout-sec = <60>;
- status = "okay";
-};
-
&vin4 {
pinctrl-0 = <&vin4_pins_cvbs>;
pinctrl-names = "default";
// SPDX-License-Identifier: GPL-2.0
/*
- * Device Tree Source for the r8a77995 SoC
+ * Device Tree Source for the R-Car D3 (R8A77995) SoC
*
* Copyright (C) 2016 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
resets = <&cpg 219>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+ <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+ <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+ <&ipmmu_ds0 6>, <&ipmmu_ds0 7>;
};
dmac1: dma-controller@e7300000 {
resets = <&cpg 218>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+ <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+ <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+ <&ipmmu_ds1 6>, <&ipmmu_ds1 7>;
};
dmac2: dma-controller@e7310000 {
resets = <&cpg 217>;
#dma-cells = <1>;
dma-channels = <8>;
+ iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+ <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+ <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>;
};
ipmmu_ds0: mmu@e6740000 {
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
status = "disabled";
};
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 703>;
+ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
- resets = <&cpg 703>;
+ resets = <&cpg 703>, <&cpg 704>;
#phy-cells = <0>;
status = "disabled";
};
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
};
};
port@2 {
reg = <2>;
du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds-encoder@feb90000 {
+ compatible = "renesas,r8a77995-lvds";
+ reg = <0 0xfeb90000 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 727>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds-encoder@feb90100 {
+ compatible = "renesas,r8a77995-lvds";
+ reg = <0 0xfeb90100 0 0x20>;
+ clocks = <&cpg CPG_MOD 727>;
+ power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
};
};
};
video-receiver@70 {
compatible = "adi,adv7482";
- reg = <0x70>;
+ reg = <0x70 0x71 0x72 0x73 0x74 0x75
+ 0x60 0x61 0x62 0x63 0x64 0x65>;
+ reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+ "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
#address-cells = <1>;
#size-cells = <0>;
&i2c_dvfs {
status = "okay";
+ clock-frequency = <400000>;
+
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
- reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
};
};
};
chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = "serial0:115200n8";
};
&i2c_dvfs {
status = "okay";
+ clock-frequency = <400000>;
+
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
+ sd-uhs-sdr104;
status = "okay";
};
# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "px30.dtsi"
+
+/ {
+ model = "Rockchip PX30 EVB";
+ compatible = "rockchip,px30-evb", "rockchip,px30";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 2>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ esc-key {
+ label = "esc";
+ linux,code = <KEY_ESC>;
+ press-threshold-microvolt = <1310000>;
+ };
+
+ home-key {
+ label = "home";
+ linux,code = <KEY_HOME>;
+ press-threshold-microvolt = <624000>;
+ };
+
+ menu-key {
+ label = "menu";
+ linux,code = <KEY_MENU>;
+ press-threshold-microvolt = <987000>;
+ };
+
+ vol-down-key {
+ label = "volume down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ press-threshold-microvolt = <300000>;
+ };
+
+ vol-up-key {
+ label = "volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ press-threshold-microvolt = <17000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 25000 0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_phy";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vcc5v0_sys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+};
+
+&display_subsystem {
+ status = "okay";
+};
+
+&emmc {
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ non-removable;
+ status = "okay";
+};
+
+&gmac {
+ clock_in_out = "output";
+ phy-supply = <&vcc_phy>;
+ snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 50000 50000>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2s1_2ch {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+};
+
+&pinctrl {
+ headphone {
+ hp_det: hp-det {
+ rockchip,pins =
+ <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ pmic {
+ pmic_int: pmic_int {
+ rockchip,pins =
+ <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc_slppin_gpio {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>;
+ };
+
+ soc_slppin_slp: soc_slppin_slp {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ soc_slppin_rst: soc_slppin_rst {
+ rockchip,pins =
+ <0 RK_PA4 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdio {
+ bus-width = <4>;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ non-removable;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb20_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <dt-bindings/clock/px30-cru.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/power/px30-power.h>
+#include <dt-bindings/soc/rockchip,boot-mode.h>
+
+/ {
+ compatible = "rockchip,px30";
+
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ ethernet0 = &gmac;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ clocks = <&cru ARMCLK>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ dynamic-power-coefficient = <90>;
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+
+ CLUSTER_SLEEP: cluster-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
+ };
+ };
+
+ cpu0_opp_table: cpu0-opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <950000 950000 1350000>;
+ clock-latency-ns = <40000>;
+ opp-suspend;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <950000 950000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <1050000 1050000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1175000 1175000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1300000 1300000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ opp-1296000000 {
+ opp-hz = /bits/ 64 <1296000000>;
+ opp-microvolt = <1350000 1350000 1350000>;
+ clock-latency-ns = <40000>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopb_out>, <&vopl_out>;
+ status = "disabled";
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ };
+
+ pmu: power-management@ff000000 {
+ compatible = "rockchip,px30-pmu", "syscon", "simple-mfd";
+ reg = <0x0 0xff000000 0x0 0x1000>;
+
+ power: power-controller {
+ compatible = "rockchip,px30-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* These power domains are grouped by VD_LOGIC */
+ pd_usb@PX30_PD_USB {
+ reg = <PX30_PD_USB>;
+ clocks = <&cru HCLK_HOST>,
+ <&cru HCLK_OTG>,
+ <&cru SCLK_OTG_ADP>;
+ pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+ };
+ pd_sdcard@PX30_PD_SDCARD {
+ reg = <PX30_PD_SDCARD>;
+ clocks = <&cru HCLK_SDMMC>,
+ <&cru SCLK_SDMMC>;
+ pm_qos = <&qos_sdmmc>;
+ };
+ pd_gmac@PX30_PD_GMAC {
+ reg = <PX30_PD_GMAC>;
+ clocks = <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>,
+ <&cru SCLK_MAC_REF>,
+ <&cru SCLK_GMAC_RX_TX>;
+ pm_qos = <&qos_gmac>;
+ };
+ pd_mmc_nand@PX30_PD_MMC_NAND {
+ reg = <PX30_PD_MMC_NAND>;
+ clocks = <&cru HCLK_NANDC>,
+ <&cru HCLK_EMMC>,
+ <&cru HCLK_SDIO>,
+ <&cru HCLK_SFC>,
+ <&cru SCLK_EMMC>,
+ <&cru SCLK_NANDC>,
+ <&cru SCLK_SDIO>,
+ <&cru SCLK_SFC>;
+ pm_qos = <&qos_emmc>, <&qos_nand>,
+ <&qos_sdio>, <&qos_sfc>;
+ };
+ pd_vpu@PX30_PD_VPU {
+ reg = <PX30_PD_VPU>;
+ clocks = <&cru ACLK_VPU>,
+ <&cru HCLK_VPU>,
+ <&cru SCLK_CORE_VPU>;
+ pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+ };
+ pd_vo@PX30_PD_VO {
+ reg = <PX30_PD_VO>;
+ clocks = <&cru ACLK_RGA>,
+ <&cru ACLK_VOPB>,
+ <&cru ACLK_VOPL>,
+ <&cru DCLK_VOPB>,
+ <&cru DCLK_VOPL>,
+ <&cru HCLK_RGA>,
+ <&cru HCLK_VOPB>,
+ <&cru HCLK_VOPL>,
+ <&cru PCLK_MIPI_DSI>,
+ <&cru SCLK_RGA_CORE>,
+ <&cru SCLK_VOPB_PWM>;
+ pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
+ <&qos_vop_m0>, <&qos_vop_m1>;
+ };
+ pd_vi@PX30_PD_VI {
+ reg = <PX30_PD_VI>;
+ clocks = <&cru ACLK_CIF>,
+ <&cru ACLK_ISP>,
+ <&cru HCLK_CIF>,
+ <&cru HCLK_ISP>,
+ <&cru SCLK_ISP>;
+ pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
+ <&qos_isp_wr>, <&qos_isp_m1>,
+ <&qos_vip>;
+ };
+ pd_gpu@PX30_PD_GPU {
+ reg = <PX30_PD_GPU>;
+ clocks = <&cru SCLK_GPU>;
+ pm_qos = <&qos_gpu>;
+ };
+ };
+ };
+
+ pmugrf: syscon@ff010000 {
+ compatible = "rockchip,px30-pmugrf", "syscon", "simple-mfd";
+ reg = <0x0 0xff010000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pmu_io_domains: io-domains {
+ compatible = "rockchip,px30-pmu-io-voltage-domain";
+ status = "disabled";
+ };
+
+ reboot-mode {
+ compatible = "syscon-reboot-mode";
+ offset = <0x200>;
+ mode-bootloader = <BOOT_BL_DOWNLOAD>;
+ mode-fastboot = <BOOT_FASTBOOT>;
+ mode-loader = <BOOT_BL_DOWNLOAD>;
+ mode-normal = <BOOT_NORMAL>;
+ mode-recovery = <BOOT_RECOVERY>;
+ };
+ };
+
+ uart0: serial@ff030000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff030000 0x0 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 0>, <&dmac 1>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ status = "disabled";
+ };
+
+ i2s1_2ch: i2s@ff070000 {
+ compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff070000 0x0 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 18>, <&dmac 19>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_2ch_sclk &i2s1_2ch_lrck
+ &i2s1_2ch_sdi &i2s1_2ch_sdo>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ i2s2_2ch: i2s@ff080000 {
+ compatible = "rockchip,px30-i2s", "rockchip,rk3066-i2s";
+ reg = <0x0 0xff080000 0x0 0x1000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ dmas = <&dmac 20>, <&dmac 21>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_2ch_sclk &i2s2_2ch_lrck
+ &i2s2_2ch_sdi &i2s2_2ch_sdo>;
+ #sound-dai-cells = <0>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@ff131000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xff131000 0 0x1000>,
+ <0x0 0xff132000 0 0x2000>,
+ <0x0 0xff134000 0 0x2000>,
+ <0x0 0xff136000 0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ grf: syscon@ff140000 {
+ compatible = "rockchip,px30-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff140000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ io_domains: io-domains {
+ compatible = "rockchip,px30-io-voltage-domain";
+ status = "disabled";
+ };
+ };
+
+ uart1: serial@ff158000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff158000 0x0 0x100>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 2>, <&dmac 3>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>;
+ status = "disabled";
+ };
+
+ uart2: serial@ff160000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff160000 0x0 0x100>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 4>, <&dmac 5>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2m0_xfer>;
+ status = "disabled";
+ };
+
+ uart3: serial@ff168000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff168000 0x0 0x100>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 6>, <&dmac 7>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3m1_xfer &uart3m1_cts &uart3m1_rts>;
+ status = "disabled";
+ };
+
+ uart4: serial@ff170000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff170000 0x0 0x100>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 8>, <&dmac 9>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_xfer &uart4_cts &uart4_rts>;
+ status = "disabled";
+ };
+
+ uart5: serial@ff178000 {
+ compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
+ reg = <0x0 0xff178000 0x0 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
+ clock-names = "baudclk", "apb_pclk";
+ dmas = <&dmac 10>, <&dmac 11>;
+ dma-names = "tx", "rx";
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart5_xfer &uart5_cts &uart5_rts>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@ff180000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff180000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ff190000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff190000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ff1a0000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff1a0000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ff1b0000 {
+ compatible = "rockchip,px30-i2c", "rockchip,rk3399-i2c";
+ reg = <0x0 0xff1b0000 0x0 0x1000>;
+ clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
+ clock-names = "i2c", "pclk";
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@ff1d0000 {
+ compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac 12>, <&dmac 13>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_clk &spi0_csn &spi0_miso &spi0_mosi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@ff1d8000 {
+ compatible = "rockchip,px30-spi", "rockchip,rk3066-spi";
+ reg = <0x0 0xff1d8000 0x0 0x1000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac 14>, <&dmac 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_clk &spi1_csn0 &spi1_csn1 &spi1_miso &spi1_mosi>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ wdt: watchdog@ff1e0000 {
+ compatible = "snps,dw-wdt";
+ reg = <0x0 0xff1e0000 0x0 0x100>;
+ clocks = <&cru PCLK_WDT_NS>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@ff200000 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200000 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@ff200010 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200010 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@ff200020 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200020 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@ff200030 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff200030 0x0 0x10>;
+ clocks = <&cru SCLK_PWM0>, <&cru PCLK_PWM0>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@ff208000 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208000 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@ff208010 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208010 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm5_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@ff208020 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208020 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm6_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@ff208030 {
+ compatible = "rockchip,px30-pwm", "rockchip,rk3328-pwm";
+ reg = <0x0 0xff208030 0x0 0x10>;
+ clocks = <&cru SCLK_PWM1>, <&cru PCLK_PWM1>;
+ clock-names = "pwm", "pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm7_pin>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ rktimer: timer@ff210000 {
+ compatible = "rockchip,px30-timer", "rockchip,rk3288-timer";
+ reg = <0x0 0xff210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_TIMER>, <&cru SCLK_TIMER0>;
+ clock-names = "pclk", "timer";
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dmac: dmac@ff240000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0xff240000 0x0 0x4000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+ };
+
+ saradc: saradc@ff288000 {
+ compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
+ reg = <0x0 0xff288000 0x0 0x100>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ #io-channel-cells = <1>;
+ clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
+ clock-names = "saradc", "apb_pclk";
+ resets = <&cru SRST_SARADC_P>;
+ reset-names = "saradc-apb";
+ status = "disabled";
+ };
+
+ cru: clock-controller@ff2b0000 {
+ compatible = "rockchip,px30-cru";
+ reg = <0x0 0xff2b0000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ assigned-clocks = <&cru PLL_NPLL>;
+ assigned-clock-rates = <1188000000>;
+ };
+
+ pmucru: clock-controller@ff2bc000 {
+ compatible = "rockchip,px30-pmucru";
+ reg = <0x0 0xff2bc000 0x0 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ assigned-clocks =
+ <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
+ <&pmucru SCLK_WIFI_PMU>, <&cru ARMCLK>,
+ <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+ <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+ <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+ assigned-clock-rates =
+ <1200000000>, <100000000>,
+ <26000000>, <600000000>,
+ <200000000>, <200000000>,
+ <150000000>, <150000000>,
+ <100000000>, <200000000>;
+ };
+
+ usb20_otg: usb@ff300000 {
+ compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x0 0xff300000 0x0 0x40000>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ g-use-dma;
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@ff340000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xff340000 0x0 0x10000>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>;
+ clock-names = "usbhost";
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@ff350000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xff350000 0x0 0x10000>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>;
+ clock-names = "usbhost";
+ power-domains = <&power PX30_PD_USB>;
+ status = "disabled";
+ };
+
+ gmac: ethernet@ff360000 {
+ compatible = "rockchip,px30-gmac";
+ reg = <0x0 0xff360000 0x0 0x10000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&cru SCLK_GMAC>, <&cru SCLK_GMAC_RX_TX>,
+ <&cru SCLK_GMAC_RX_TX>, <&cru SCLK_MAC_REF>,
+ <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>, <&cru SCLK_GMAC_RMII>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_ref",
+ "clk_mac_refout", "aclk_mac",
+ "pclk_mac", "clk_mac_speed";
+ rockchip,grf = <&grf>;
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rmii_pins &mac_refclk_12ma>;
+ power-domains = <&power PX30_PD_GMAC>;
+ resets = <&cru SRST_GMAC_A>;
+ reset-names = "stmmaceth";
+ status = "disabled";
+ };
+
+ sdmmc: dwmmc@ff370000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff370000 0x0 0x4000>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+ <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_det &sdmmc_bus4>;
+ power-domains = <&power PX30_PD_SDCARD>;
+ status = "disabled";
+ };
+
+ sdio: dwmmc@ff380000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff380000 0x0 0x4000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio_bus4 &sdio_cmd &sdio_clk>;
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@ff390000 {
+ compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
+ reg = <0x0 0xff390000 0x0 0x4000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+ fifo-depth = <0x100>;
+ max-frequency = <150000000>;
+ power-domains = <&power PX30_PD_MMC_NAND>;
+ status = "disabled";
+ };
+
+ vopb: vop@ff460000 {
+ compatible = "rockchip,px30-vop-big";
+ reg = <0x0 0xff460000 0x0 0xefc>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOPB>, <&cru DCLK_VOPB>,
+ <&cru HCLK_VOPB>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOPB_A>, <&cru SRST_VOPB_H>, <&cru SRST_VOPB>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopb_mmu>;
+ power-domains = <&power PX30_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vopb_mmu: iommu@ff460f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff460f00 0x0 0x100>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopb_mmu";
+ clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power PX30_PD_VO>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vopl: vop@ff470000 {
+ compatible = "rockchip,px30-vop-lit";
+ reg = <0x0 0xff470000 0x0 0xefc>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOPL>, <&cru DCLK_VOPL>,
+ <&cru HCLK_VOPL>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOPL_A>, <&cru SRST_VOPL_H>, <&cru SRST_VOPL>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopl_mmu>;
+ power-domains = <&power PX30_PD_VO>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ vopl_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ vopl_mmu: iommu@ff470f00 {
+ compatible = "rockchip,iommu";
+ reg = <0x0 0xff470f00 0x0 0x100>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopl_mmu";
+ clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
+ clock-names = "aclk", "hclk";
+ power-domains = <&power PX30_PD_VO>;
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ qos_gmac: qos@ff518000 {
+ compatible = "syscon";
+ reg = <0x0 0xff518000 0x0 0x20>;
+ };
+
+ qos_gpu: qos@ff520000 {
+ compatible = "syscon";
+ reg = <0x0 0xff520000 0x0 0x20>;
+ };
+
+ qos_sdmmc: qos@ff52c000 {
+ compatible = "syscon";
+ reg = <0x0 0xff52c000 0x0 0x20>;
+ };
+
+ qos_emmc: qos@ff538000 {
+ compatible = "syscon";
+ reg = <0x0 0xff538000 0x0 0x20>;
+ };
+
+ qos_nand: qos@ff538080 {
+ compatible = "syscon";
+ reg = <0x0 0xff538080 0x0 0x20>;
+ };
+
+ qos_sdio: qos@ff538100 {
+ compatible = "syscon";
+ reg = <0x0 0xff538100 0x0 0x20>;
+ };
+
+ qos_sfc: qos@ff538180 {
+ compatible = "syscon";
+ reg = <0x0 0xff538180 0x0 0x20>;
+ };
+
+ qos_usb_host: qos@ff540000 {
+ compatible = "syscon";
+ reg = <0x0 0xff540000 0x0 0x20>;
+ };
+
+ qos_usb_otg: qos@ff540080 {
+ compatible = "syscon";
+ reg = <0x0 0xff540080 0x0 0x20>;
+ };
+
+ qos_isp_128: qos@ff548000 {
+ compatible = "syscon";
+ reg = <0x0 0xff548000 0x0 0x20>;
+ };
+
+ qos_isp_rd: qos@ff548080 {
+ compatible = "syscon";
+ reg = <0x0 0xff548080 0x0 0x20>;
+ };
+
+ qos_isp_wr: qos@ff548100 {
+ compatible = "syscon";
+ reg = <0x0 0xff548100 0x0 0x20>;
+ };
+
+ qos_isp_m1: qos@ff548180 {
+ compatible = "syscon";
+ reg = <0x0 0xff548180 0x0 0x20>;
+ };
+
+ qos_vip: qos@ff548200 {
+ compatible = "syscon";
+ reg = <0x0 0xff548200 0x0 0x20>;
+ };
+
+ qos_rga_rd: qos@ff550000 {
+ compatible = "syscon";
+ reg = <0x0 0xff550000 0x0 0x20>;
+ };
+
+ qos_rga_wr: qos@ff550080 {
+ compatible = "syscon";
+ reg = <0x0 0xff550080 0x0 0x20>;
+ };
+
+ qos_vop_m0: qos@ff550100 {
+ compatible = "syscon";
+ reg = <0x0 0xff550100 0x0 0x20>;
+ };
+
+ qos_vop_m1: qos@ff550180 {
+ compatible = "syscon";
+ reg = <0x0 0xff550180 0x0 0x20>;
+ };
+
+ qos_vpu: qos@ff558000 {
+ compatible = "syscon";
+ reg = <0x0 0xff558000 0x0 0x20>;
+ };
+
+ qos_vpu_r128: qos@ff558080 {
+ compatible = "syscon";
+ reg = <0x0 0xff558080 0x0 0x20>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,px30-pinctrl";
+ rockchip,grf = <&grf>;
+ rockchip,pmu = <&pmugrf>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio0: gpio0@ff040000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff040000 0x0 0x100>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pmucru PCLK_GPIO0_PMU>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@ff250000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff250000 0x0 0x100>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@ff260000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff260000 0x0 0x100>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@ff270000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x0 0xff270000 0x0 0x100>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_2ma: pcfg-pull-none-2ma {
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_2ma: pcfg-pull-up-2ma {
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pcfg_pull_up_4ma: pcfg-pull-up-4ma {
+ bias-pull-up;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_none_4ma: pcfg-pull-none-4ma {
+ bias-disable;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_down_4ma: pcfg-pull-down-4ma {
+ bias-pull-down;
+ drive-strength = <4>;
+ };
+
+ pcfg_pull_none_8ma: pcfg-pull-none-8ma {
+ bias-disable;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_8ma: pcfg-pull-up-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_up_12ma: pcfg-pull-up-12ma {
+ bias-pull-up;
+ drive-strength = <12>;
+ };
+
+ pcfg_pull_none_smt: pcfg-pull-none-smt {
+ bias-disable;
+ input-schmitt-enable;
+ };
+
+ pcfg_output_high: pcfg-output-high {
+ output-high;
+ };
+
+ pcfg_output_low: pcfg-output-low {
+ output-low;
+ };
+
+ pcfg_input_high: pcfg-input-high {
+ bias-pull-up;
+ input-enable;
+ };
+
+ pcfg_input: pcfg-input {
+ input-enable;
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins =
+ <0 RK_PB0 1 &pcfg_pull_none_smt>,
+ <0 RK_PB1 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins =
+ <0 RK_PC2 1 &pcfg_pull_none_smt>,
+ <0 RK_PC3 1 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins =
+ <2 RK_PB7 2 &pcfg_pull_none_smt>,
+ <2 RK_PC0 2 &pcfg_pull_none_smt>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins =
+ <1 RK_PB4 4 &pcfg_pull_none_smt>,
+ <1 RK_PB5 4 &pcfg_pull_none_smt>;
+ };
+ };
+
+ tsadc {
+ tsadc_otp_gpio: tsadc-otp-gpio {
+ rockchip,pins =
+ <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ tsadc_otp_out: tsadc-otp-out {
+ rockchip,pins =
+ <0 RK_PA6 1 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins =
+ <0 RK_PB2 1 &pcfg_pull_up>,
+ <0 RK_PB3 1 &pcfg_pull_up>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins =
+ <0 RK_PB4 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins =
+ <0 RK_PB5 1 &pcfg_pull_none>;
+ };
+
+ uart0_rts_gpio: uart0-rts-gpio {
+ rockchip,pins =
+ <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins =
+ <1 RK_PC1 1 &pcfg_pull_up>,
+ <1 RK_PC0 1 &pcfg_pull_up>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins =
+ <1 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins =
+ <1 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ uart1_rts_gpio: uart1-rts-gpio {
+ rockchip,pins =
+ <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart2-m0 {
+ uart2m0_xfer: uart2m0-xfer {
+ rockchip,pins =
+ <1 RK_PD2 2 &pcfg_pull_up>,
+ <1 RK_PD3 2 &pcfg_pull_up>;
+ };
+ };
+
+ uart2-m1 {
+ uart2m1_xfer: uart2m1-xfer {
+ rockchip,pins =
+ <2 RK_PB4 2 &pcfg_pull_up>,
+ <2 RK_PB6 2 &pcfg_pull_up>;
+ };
+ };
+
+ uart3-m0 {
+ uart3m0_xfer: uart3m0-xfer {
+ rockchip,pins =
+ <0 RK_PC0 2 &pcfg_pull_up>,
+ <0 RK_PC1 2 &pcfg_pull_up>;
+ };
+
+ uart3m0_cts: uart3m0-cts {
+ rockchip,pins =
+ <0 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ uart3m0_rts: uart3m0-rts {
+ rockchip,pins =
+ <0 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ uart3m0_rts_gpio: uart3m0-rts-gpio {
+ rockchip,pins =
+ <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart3-m1 {
+ uart3m1_xfer: uart3m1-xfer {
+ rockchip,pins =
+ <1 RK_PB6 2 &pcfg_pull_up>,
+ <1 RK_PB7 2 &pcfg_pull_up>;
+ };
+
+ uart3m1_cts: uart3m1-cts {
+ rockchip,pins =
+ <1 RK_PB4 2 &pcfg_pull_none>;
+ };
+
+ uart3m1_rts: uart3m1-rts {
+ rockchip,pins =
+ <1 RK_PB5 2 &pcfg_pull_none>;
+ };
+
+ uart3m1_rts_gpio: uart3m1-rts-gpio {
+ rockchip,pins =
+ <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ uart4 {
+ uart4_xfer: uart4-xfer {
+ rockchip,pins =
+ <1 RK_PD4 2 &pcfg_pull_up>,
+ <1 RK_PD5 2 &pcfg_pull_up>;
+ };
+
+ uart4_cts: uart4-cts {
+ rockchip,pins =
+ <1 RK_PD6 2 &pcfg_pull_none>;
+ };
+
+ uart4_rts: uart4-rts {
+ rockchip,pins =
+ <1 RK_PD7 2 &pcfg_pull_none>;
+ };
+ };
+
+ uart5 {
+ uart5_xfer: uart5-xfer {
+ rockchip,pins =
+ <3 RK_PA2 4 &pcfg_pull_up>,
+ <3 RK_PA1 4 &pcfg_pull_up>;
+ };
+
+ uart5_cts: uart5-cts {
+ rockchip,pins =
+ <3 RK_PA3 4 &pcfg_pull_none>;
+ };
+
+ uart5_rts: uart5-rts {
+ rockchip,pins =
+ <3 RK_PA5 4 &pcfg_pull_none>;
+ };
+ };
+
+ spi0 {
+ spi0_clk: spi0-clk {
+ rockchip,pins =
+ <1 RK_PB7 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_csn: spi0-csn {
+ rockchip,pins =
+ <1 RK_PB6 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_miso: spi0-miso {
+ rockchip,pins =
+ <1 RK_PB5 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_mosi: spi0-mosi {
+ rockchip,pins =
+ <1 RK_PB4 3 &pcfg_pull_up_4ma>;
+ };
+
+ spi0_clk_hs: spi0-clk-hs {
+ rockchip,pins =
+ <1 RK_PB7 3 &pcfg_pull_up_8ma>;
+ };
+
+ spi0_miso_hs: spi0-miso-hs {
+ rockchip,pins =
+ <1 RK_PB5 3 &pcfg_pull_up_8ma>;
+ };
+
+ spi0_mosi_hs: spi0-mosi-hs {
+ rockchip,pins =
+ <1 RK_PB4 3 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ spi1 {
+ spi1_clk: spi1-clk {
+ rockchip,pins =
+ <3 RK_PB7 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_csn0: spi1-csn0 {
+ rockchip,pins =
+ <3 RK_PB1 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_csn1: spi1-csn1 {
+ rockchip,pins =
+ <3 RK_PB2 2 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_miso: spi1-miso {
+ rockchip,pins =
+ <3 RK_PB6 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_mosi: spi1-mosi {
+ rockchip,pins =
+ <3 RK_PB4 4 &pcfg_pull_up_4ma>;
+ };
+
+ spi1_clk_hs: spi1-clk-hs {
+ rockchip,pins =
+ <3 RK_PB7 4 &pcfg_pull_up_8ma>;
+ };
+
+ spi1_miso_hs: spi1-miso-hs {
+ rockchip,pins =
+ <3 RK_PB6 4 &pcfg_pull_up_8ma>;
+ };
+
+ spi1_mosi_hs: spi1-mosi-hs {
+ rockchip,pins =
+ <3 RK_PB4 4 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ pdm {
+ pdm_clk0m0: pdm-clk0m0 {
+ rockchip,pins =
+ <3 RK_PC6 2 &pcfg_pull_none>;
+ };
+
+ pdm_clk0m1: pdm-clk0m1 {
+ rockchip,pins =
+ <2 RK_PC6 1 &pcfg_pull_none>;
+ };
+
+ pdm_clk1: pdm-clk1 {
+ rockchip,pins =
+ <3 RK_PC7 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi0m0: pdm-sdi0m0 {
+ rockchip,pins =
+ <3 RK_PD3 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi0m1: pdm-sdi0m1 {
+ rockchip,pins =
+ <2 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi1: pdm-sdi1 {
+ rockchip,pins =
+ <3 RK_PD0 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi2: pdm-sdi2 {
+ rockchip,pins =
+ <3 RK_PD1 2 &pcfg_pull_none>;
+ };
+
+ pdm_sdi3: pdm-sdi3 {
+ rockchip,pins =
+ <3 RK_PD2 2 &pcfg_pull_none>;
+ };
+
+ pdm_clk0m0_sleep: pdm-clk0m0-sleep {
+ rockchip,pins =
+ <3 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_clk0m_sleep1: pdm-clk0m1-sleep {
+ rockchip,pins =
+ <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_clk1_sleep: pdm-clk1-sleep {
+ rockchip,pins =
+ <3 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi0m0_sleep: pdm-sdi0m0-sleep {
+ rockchip,pins =
+ <3 RK_PD3 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi0m1_sleep: pdm-sdi0m1-sleep {
+ rockchip,pins =
+ <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi1_sleep: pdm-sdi1-sleep {
+ rockchip,pins =
+ <3 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi2_sleep: pdm-sdi2-sleep {
+ rockchip,pins =
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+
+ pdm_sdi3_sleep: pdm-sdi3-sleep {
+ rockchip,pins =
+ <3 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>;
+ };
+ };
+
+ i2s0 {
+ i2s0_8ch_mclk: i2s0-8ch-mclk {
+ rockchip,pins =
+ <3 RK_PC1 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sclktx: i2s0-8ch-sclktx {
+ rockchip,pins =
+ <3 RK_PC3 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sclkrx: i2s0-8ch-sclkrx {
+ rockchip,pins =
+ <3 RK_PB4 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_lrcktx: i2s0-8ch-lrcktx {
+ rockchip,pins =
+ <3 RK_PC2 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_lrckrx: i2s0-8ch-lrckrx {
+ rockchip,pins =
+ <3 RK_PB5 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo0: i2s0-8ch-sdo0 {
+ rockchip,pins =
+ <3 RK_PC4 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo1: i2s0-8ch-sdo1 {
+ rockchip,pins =
+ <3 RK_PC0 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo2: i2s0-8ch-sdo2 {
+ rockchip,pins =
+ <3 RK_PB7 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdo3: i2s0-8ch-sdo3 {
+ rockchip,pins =
+ <3 RK_PB6 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi0: i2s0-8ch-sdi0 {
+ rockchip,pins =
+ <3 RK_PC5 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi1: i2s0-8ch-sdi1 {
+ rockchip,pins =
+ <3 RK_PB3 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi2: i2s0-8ch-sdi2 {
+ rockchip,pins =
+ <3 RK_PB1 2 &pcfg_pull_none>;
+ };
+
+ i2s0_8ch_sdi3: i2s0-8ch-sdi3 {
+ rockchip,pins =
+ <3 RK_PB0 2 &pcfg_pull_none>;
+ };
+ };
+
+ i2s1 {
+ i2s1_2ch_mclk: i2s1-2ch-mclk {
+ rockchip,pins =
+ <2 RK_PC3 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sclk: i2s1-2ch-sclk {
+ rockchip,pins =
+ <2 RK_PC2 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_lrck: i2s1-2ch-lrck {
+ rockchip,pins =
+ <2 RK_PC1 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sdi: i2s1-2ch-sdi {
+ rockchip,pins =
+ <2 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ i2s1_2ch_sdo: i2s1-2ch-sdo {
+ rockchip,pins =
+ <2 RK_PC4 1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s2 {
+ i2s2_2ch_mclk: i2s2-2ch-mclk {
+ rockchip,pins =
+ <3 RK_PA1 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sclk: i2s2-2ch-sclk {
+ rockchip,pins =
+ <3 RK_PA2 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_lrck: i2s2-2ch-lrck {
+ rockchip,pins =
+ <3 RK_PA3 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sdi: i2s2-2ch-sdi {
+ rockchip,pins =
+ <3 RK_PA5 2 &pcfg_pull_none>;
+ };
+
+ i2s2_2ch_sdo: i2s2-2ch-sdo {
+ rockchip,pins =
+ <3 RK_PA7 2 &pcfg_pull_none>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <1 RK_PD6 1 &pcfg_pull_none_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <1 RK_PD7 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_det: sdmmc-det {
+ rockchip,pins =
+ <0 RK_PA3 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <1 RK_PD2 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <1 RK_PD2 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD3 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD4 1 &pcfg_pull_up_8ma>,
+ <1 RK_PD5 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_gpio: sdmmc-gpio {
+ rockchip,pins =
+ <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
+ <1 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
+ };
+ };
+
+ sdio {
+ sdio_clk: sdio-clk {
+ rockchip,pins =
+ <1 RK_PC5 1 &pcfg_pull_none>;
+ };
+
+ sdio_cmd: sdio-cmd {
+ rockchip,pins =
+ <1 RK_PC4 1 &pcfg_pull_up>;
+ };
+
+ sdio_bus4: sdio-bus4 {
+ rockchip,pins =
+ <1 RK_PC6 1 &pcfg_pull_up>,
+ <1 RK_PC7 1 &pcfg_pull_up>,
+ <1 RK_PD0 1 &pcfg_pull_up>,
+ <1 RK_PD1 1 &pcfg_pull_up>;
+ };
+
+ sdio_gpio: sdio-gpio {
+ rockchip,pins =
+ <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>,
+ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins =
+ <1 RK_PB1 2 &pcfg_pull_none_8ma>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins =
+ <1 RK_PB2 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_pwren: emmc-pwren {
+ rockchip,pins =
+ <1 RK_PB0 2 &pcfg_pull_none>;
+ };
+
+ emmc_rstnout: emmc-rstnout {
+ rockchip,pins =
+ <1 RK_PB3 2 &pcfg_pull_none>;
+ };
+
+ emmc_bus1: emmc-bus1 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_bus4: emmc-bus4 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA1 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA2 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA3 2 &pcfg_pull_up_8ma>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins =
+ <1 RK_PA0 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA1 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA2 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA3 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA4 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA5 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA6 2 &pcfg_pull_up_8ma>,
+ <1 RK_PA7 2 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ flash {
+ flash_cs0: flash-cs0 {
+ rockchip,pins =
+ <1 RK_PB0 1 &pcfg_pull_none>;
+ };
+
+ flash_rdy: flash-rdy {
+ rockchip,pins =
+ <1 RK_PB1 1 &pcfg_pull_none>;
+ };
+
+ flash_dqs: flash-dqs {
+ rockchip,pins =
+ <1 RK_PB2 1 &pcfg_pull_none>;
+ };
+
+ flash_ale: flash-ale {
+ rockchip,pins =
+ <1 RK_PB3 1 &pcfg_pull_none>;
+ };
+
+ flash_cle: flash-cle {
+ rockchip,pins =
+ <1 RK_PB4 1 &pcfg_pull_none>;
+ };
+
+ flash_wrn: flash-wrn {
+ rockchip,pins =
+ <1 RK_PB5 1 &pcfg_pull_none>;
+ };
+
+ flash_csl: flash-csl {
+ rockchip,pins =
+ <1 RK_PB6 1 &pcfg_pull_none>;
+ };
+
+ flash_rdn: flash-rdn {
+ rockchip,pins =
+ <1 RK_PB7 1 &pcfg_pull_none>;
+ };
+
+ flash_bus8: flash-bus8 {
+ rockchip,pins =
+ <1 RK_PA0 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA1 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA2 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA3 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA4 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA5 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA6 1 &pcfg_pull_up_12ma>,
+ <1 RK_PA7 1 &pcfg_pull_up_12ma>;
+ };
+ };
+
+ lcdc {
+ lcdc_rgb_dclk_pin: lcdc-rgb-dclk-pin {
+ rockchip,pins =
+ <3 RK_PA0 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_hsync_pin: lcdc-rgb-m0-hsync-pin {
+ rockchip,pins =
+ <3 RK_PA1 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_vsync_pin: lcdc-rgb-m0-vsync-pin {
+ rockchip,pins =
+ <3 RK_PA2 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb_m0_den_pin: lcdc-rgb-m0-den-pin {
+ rockchip,pins =
+ <3 RK_PA3 1 &pcfg_pull_none_12ma>;
+ };
+
+ lcdc_rgb888_m0_data_pins: lcdc-rgb888-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+ <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+ <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+ <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+ <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+ <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+ };
+
+ lcdc_rgb666_m0_data_pins: lcdc-rgb666-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+ };
+
+ lcdc_rgb565_m0_data_pins: lcdc-rgb565-m0-data-pins {
+ rockchip,pins =
+ <3 RK_PA7 1 &pcfg_pull_none_8ma>, /* lcdc_d3 */
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA5 1 &pcfg_pull_none_8ma>, /* lcdc_d1 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB1 1 &pcfg_pull_none_8ma>, /* lcdc_d5 */
+ <3 RK_PB0 1 &pcfg_pull_none_8ma>, /* lcdc_d4 */
+ <3 RK_PB7 1 &pcfg_pull_none_8ma>, /* lcdc_d11 */
+ <3 RK_PB6 1 &pcfg_pull_none_8ma>, /* lcdc_d10 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PB4 1 &pcfg_pull_none_8ma>, /* lcdc_d8 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+ };
+
+ lcdc_rgb888_m1_data_pins: lcdc-rgb888-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC7 1 &pcfg_pull_none_8ma>, /* lcdc_d19 */
+ <3 RK_PC6 1 &pcfg_pull_none_8ma>, /* lcdc_d18 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>, /* lcdc_d16 */
+ <3 RK_PD3 1 &pcfg_pull_none_8ma>, /* lcdc_d23 */
+ <3 RK_PD2 1 &pcfg_pull_none_8ma>, /* lcdc_d22 */
+ <3 RK_PD1 1 &pcfg_pull_none_8ma>, /* lcdc_d21 */
+ <3 RK_PD0 1 &pcfg_pull_none_8ma>; /* lcdc_d20 */
+ };
+
+ lcdc_rgb666_m1_data_pins: lcdc-rgb666-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>, /* lcdc_d12 */
+ <3 RK_PC5 1 &pcfg_pull_none_8ma>, /* lcdc_d17 */
+ <3 RK_PC4 1 &pcfg_pull_none_8ma>; /* lcdc_d16 */
+ };
+
+ lcdc_rgb565_m1_data_pins: lcdc-rgb565-m1-data-pins {
+ rockchip,pins =
+ <3 RK_PA6 1 &pcfg_pull_none_8ma>, /* lcdc_d2 */
+ <3 RK_PA4 1 &pcfg_pull_none_8ma>, /* lcdc_d0 */
+ <3 RK_PB3 1 &pcfg_pull_none_8ma>, /* lcdc_d7 */
+ <3 RK_PB2 1 &pcfg_pull_none_8ma>, /* lcdc_d6 */
+ <3 RK_PB5 1 &pcfg_pull_none_8ma>, /* lcdc_d9 */
+ <3 RK_PC3 1 &pcfg_pull_none_8ma>, /* lcdc_d15 */
+ <3 RK_PC2 1 &pcfg_pull_none_8ma>, /* lcdc_d14 */
+ <3 RK_PC1 1 &pcfg_pull_none_8ma>, /* lcdc_d13 */
+ <3 RK_PC0 1 &pcfg_pull_none_8ma>; /* lcdc_d12 */
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins =
+ <0 RK_PB7 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins =
+ <0 RK_PC0 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins =
+ <2 RK_PB5 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins =
+ <0 RK_PC1 1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm4 {
+ pwm4_pin: pwm4-pin {
+ rockchip,pins =
+ <3 RK_PC2 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm5 {
+ pwm5_pin: pwm5-pin {
+ rockchip,pins =
+ <3 RK_PC3 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm6 {
+ pwm6_pin: pwm6-pin {
+ rockchip,pins =
+ <3 RK_PC4 3 &pcfg_pull_none>;
+ };
+ };
+
+ pwm7 {
+ pwm7_pin: pwm7-pin {
+ rockchip,pins =
+ <3 RK_PC5 3 &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ rmii_pins: rmii-pins {
+ rockchip,pins =
+ <2 RK_PA0 2 &pcfg_pull_none_12ma>, /* mac_txen */
+ <2 RK_PA1 2 &pcfg_pull_none_12ma>, /* mac_txd1 */
+ <2 RK_PA2 2 &pcfg_pull_none_12ma>, /* mac_txd0 */
+ <2 RK_PA3 2 &pcfg_pull_none>, /* mac_rxd0 */
+ <2 RK_PA4 2 &pcfg_pull_none>, /* mac_rxd1 */
+ <2 RK_PA5 2 &pcfg_pull_none>, /* mac_rxer */
+ <2 RK_PA6 2 &pcfg_pull_none>, /* mac_rxdv */
+ <2 RK_PA7 2 &pcfg_pull_none>, /* mac_mdio */
+ <2 RK_PB1 2 &pcfg_pull_none>; /* mac_mdc */
+ };
+
+ mac_refclk_12ma: mac-refclk-12ma {
+ rockchip,pins =
+ <2 RK_PB2 2 &pcfg_pull_none_12ma>;
+ };
+
+ mac_refclk: mac-refclk {
+ rockchip,pins =
+ <2 RK_PB2 2 &pcfg_pull_none>;
+ };
+ };
+
+ cif-m0 {
+ cif_clkout_m0: cif-clkout-m0 {
+ rockchip,pins =
+ <2 RK_PB3 1 &pcfg_pull_none>;
+ };
+
+ dvp_d2d9_m0: dvp-d2d9-m0 {
+ rockchip,pins =
+ <2 RK_PA0 1 &pcfg_pull_none>, /* cif_data2 */
+ <2 RK_PA1 1 &pcfg_pull_none>, /* cif_data3 */
+ <2 RK_PA2 1 &pcfg_pull_none>, /* cif_data4 */
+ <2 RK_PA3 1 &pcfg_pull_none>, /* cif_data5 */
+ <2 RK_PA4 1 &pcfg_pull_none>, /* cif_data6 */
+ <2 RK_PA5 1 &pcfg_pull_none>, /* cif_data7 */
+ <2 RK_PA6 1 &pcfg_pull_none>, /* cif_data8 */
+ <2 RK_PA7 1 &pcfg_pull_none>, /* cif_data9 */
+ <2 RK_PB0 1 &pcfg_pull_none>, /* cif_sync */
+ <2 RK_PB1 1 &pcfg_pull_none>, /* cif_href */
+ <2 RK_PB2 1 &pcfg_pull_none>, /* cif_clkin */
+ <2 RK_PB3 1 &pcfg_pull_none>; /* cif_clkout */
+ };
+
+ dvp_d0d1_m0: dvp-d0d1-m0 {
+ rockchip,pins =
+ <2 RK_PB4 1 &pcfg_pull_none>, /* cif_data0 */
+ <2 RK_PB6 1 &pcfg_pull_none>; /* cif_data1 */
+ };
+
+ dvp_d10d11_m0:d10-d11-m0 {
+ rockchip,pins =
+ <2 RK_PB7 1 &pcfg_pull_none>, /* cif_data10 */
+ <2 RK_PC0 1 &pcfg_pull_none>; /* cif_data11 */
+ };
+ };
+
+ cif-m1 {
+ cif_clkout_m1: cif-clkout-m1 {
+ rockchip,pins =
+ <3 RK_PD0 3 &pcfg_pull_none>;
+ };
+
+ dvp_d2d9_m1: dvp-d2d9-m1 {
+ rockchip,pins =
+ <3 RK_PA3 3 &pcfg_pull_none>, /* cif_data2 */
+ <3 RK_PA5 3 &pcfg_pull_none>, /* cif_data3 */
+ <3 RK_PA7 3 &pcfg_pull_none>, /* cif_data4 */
+ <3 RK_PB0 3 &pcfg_pull_none>, /* cif_data5 */
+ <3 RK_PB1 3 &pcfg_pull_none>, /* cif_data6 */
+ <3 RK_PB4 3 &pcfg_pull_none>, /* cif_data7 */
+ <3 RK_PB6 3 &pcfg_pull_none>, /* cif_data8 */
+ <3 RK_PB7 3 &pcfg_pull_none>, /* cif_data9 */
+ <3 RK_PD1 3 &pcfg_pull_none>, /* cif_sync */
+ <3 RK_PD2 3 &pcfg_pull_none>, /* cif_href */
+ <3 RK_PD3 3 &pcfg_pull_none>, /* cif_clkin */
+ <3 RK_PD0 3 &pcfg_pull_none>; /* cif_clkout */
+ };
+
+ dvp_d0d1_m1: dvp-d0d1-m1 {
+ rockchip,pins =
+ <3 RK_PA1 3 &pcfg_pull_none>, /* cif_data0 */
+ <3 RK_PA2 3 &pcfg_pull_none>; /* cif_data1 */
+ };
+
+ dvp_d10d11_m1:d10-d11-m1 {
+ rockchip,pins =
+ <3 RK_PC6 3 &pcfg_pull_none>, /* cif_data10 */
+ <3 RK_PC7 3 &pcfg_pull_none>; /* cif_data11 */
+ };
+ };
+
+ isp {
+ isp_prelight: isp-prelight {
+ rockchip,pins =
+ <3 RK_PD1 4 &pcfg_pull_none>;
+ };
+ };
+ };
+};
vin-supply = <&vcc_io>;
};
+ vcc_sdio: sdmmcio-regulator {
+ compatible = "regulator-gpio";
+ gpios = <&grf_gpio 0 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ regulator-name = "vcc_sdio";
+ regulator-type = "voltage";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
};
};
+&io_domains {
+ status = "okay";
+
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc18_emmc>;
+ vccio3-supply = <&vcc_sdio>;
+ vccio4-supply = <&vcc_18>;
+ vccio5-supply = <&vcc_io>;
+ vccio6-supply = <&vcc_io>;
+ pmuio-supply = <&vcc_io>;
+};
+
&pinctrl {
pmic {
pmic_int_l: pmic-int-l {
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb20_host_drv>;
regulator-name = "vcc_host1_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3328";
+ dais = <&spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
};
&cpu0 {
status = "okay";
};
+&hdmi {
+ status = "okay";
+};
+
+&hdmiphy {
+ status = "okay";
+};
+
&i2c1 {
status = "okay";
usb2 {
usb20_host_drv: usb20-host-drv {
- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdifm0_tx>;
+ status = "okay";
+ #sound-dai-cells = <0>;
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ spiflash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+
+ /* maximum speed for Rockchip SPI */
+ spi-max-frequency = <50000000>;
+ };
+};
+
&tsadc {
rockchip,hw-tshut-mode = <0>;
rockchip,hw-tshut-polarity = <0>;
&usb_host0_ohci {
status = "okay";
};
+
+&vop {
+ status = "okay";
+};
+
+&vop_mmu {
+ status = "okay";
+};
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
+ display_subsystem: display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vop_out>;
+ };
+
psci {
compatible = "arm,psci-1.0", "arm,psci-0.2";
method = "smc";
status = "disabled";
};
+ grf_gpio: grf-gpio {
+ compatible = "rockchip,rk3328-grf-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
power: power-controller {
compatible = "rockchip,rk3328-power-controller";
#power-domain-cells = <1>;
mode-bootloader = <BOOT_FASTBOOT>;
mode-loader = <BOOT_BL_DOWNLOAD>;
};
-
};
uart0: serial@ff110000 {
status = "disabled";
};
+ vop: vop@ff370000 {
+ compatible = "rockchip,rk3328-vop";
+ reg = <0x0 0xff370000 0x0 0x3efc>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP>, <&cru DCLK_LCDC>, <&cru HCLK_VOP>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vop_mmu>;
+ status = "disabled";
+
+ vop_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vop_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vop>;
+ };
+ };
+ };
+
vop_mmu: iommu@ff373f00 {
compatible = "rockchip,iommu";
reg = <0x0 0xff373f00 0x0 0x100>;
status = "disabled";
};
+ hdmi: hdmi@ff3c0000 {
+ compatible = "rockchip,rk3328-dw-hdmi";
+ reg = <0x0 0xff3c0000 0x0 0x20000>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI>,
+ <&cru SCLK_HDMI_SFC>;
+ clock-names = "iahb",
+ "isfr";
+ phys = <&hdmiphy>;
+ phy-names = "hdmi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec &hdmii2c_xfer &hdmi_hpd>;
+ rockchip,grf = <&grf>;
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&vop_out_hdmi>;
+ };
+ };
+ };
+ };
+
+ hdmiphy: phy@ff430000 {
+ compatible = "rockchip,rk3328-hdmi-phy";
+ reg = <0x0 0xff430000 0x0 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMIPHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
+ clock-names = "sysclk", "refoclk", "refpclk";
+ clock-output-names = "hdmi_phy";
+ #clock-cells = <0>;
+ nvmem-cells = <&efuse_cpu_version>;
+ nvmem-cell-names = "cpu-version";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
cru: clock-controller@ff440000 {
compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon";
reg = <0x0 0xff440000 0x0 0x1000>;
*/
/dts-v1/;
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
+#include "rk3399-rock960.dtsi"
/ {
model = "96boards RK3399 Ficus";
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
-
- vcc1v8_s0: vcc1v8-s0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_drv>;
- regulator-boot-on;
- regulator-name = "vcc3v3_pcie";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc5v0_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 0>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- };
-
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
};
&gmac {
status = "okay";
};
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- status = "okay";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_hdmi: LDO_REG2 {
- regulator-name = "vcca1v8_hdmi";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: LDO_REG4 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc3v0_sd: LDO_REG5 {
- regulator-name = "vcc3v0_sd";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca0v9_hdmi: LDO_REG7 {
- regulator-name = "vcca0v9_hdmi";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&io_domains {
- bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
- audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
- sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
- gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
&pcie0 {
ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_1v8>;
- status = "okay";
};
&pinctrl {
};
};
- sdmmc {
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
- <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
- };
- };
-
pcie {
pcie_drv: pcie-drv {
rockchip,pins =
};
};
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_gpio: vsel1-gpio {
- rockchip,pins =
- <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_gpio: vsel2-gpio {
- rockchip,pins =
- <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
usb2 {
host_vbus_drv: host-vbus-drv {
rockchip,pins =
};
};
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- clock-frequency = <100000000>;
- clock-freq-min-max = <100000 100000000>;
- disable-wp;
- sd-uhs-sdr104;
- vqmmc-supply = <&vcc_sd>;
- card-detect-delay = <800>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&u2phy1 {
- status = "okay";
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy0_otg {
- status = "okay";
-};
-
-&u2phy1_otg {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
&usbdrd_dwc3_0 {
- status = "okay";
dr_mode = "host";
};
-&usbdrd3_1 {
- status = "okay";
-};
-
&usbdrd_dwc3_1 {
- status = "okay";
dr_mode = "host";
};
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
+&vcc3v3_pcie {
+ gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
};
-&vopl_mmu {
- status = "okay";
+&vcc5v0_host {
+ gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
};
};
};
+ wifi {
+ wifi_host_wake_l: wifi-host-wake-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
work_led_gpio: work_led-gpio {
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
status = "okay";
};
+&sdio0 {
+ /* WiFi & BT combo module Ampak AP6356S */
+ bus-width = <4>;
+ cap-sdio-irq;
+ cap-sd-highspeed;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+
+ /* Power supply */
+ vqmmc-supply = &vcc1v8_s3; /* IO line */
+ vmmc-supply = &vcc_sdio; /* card's power */
+
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
+ interrupt-names = "host-wake";
+ brcm,drive-strength = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
status = "okay";
clock-frequency = <400000>;
- sgtl5000: codec@0a {
+ sgtl5000: codec@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&sgtl5000_clk>;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
+ */
+
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Firefly ROC-RK3399-PC Board";
+ compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 25000 0>;
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ vcc_vbus_typec0: vcc-vbus-typec0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_vbus_typec0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ /*
+ * should be placed inside mp8859, but not until mp8859 has
+ * its own dt-binding.
+ */
+ vcc12v_sys: mp8859-dcdc1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc12v_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ vin-supply = <&vcc_vbus_typec0>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc12v_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_vbus_typec1: vcc-vbus-typec1 {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc_vbus_typec1_en>;
+ regulator-name = "vcc_vbus_typec1";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc12v_sys>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc3v3_sys>;
+ vcc2-supply = <&vcc3v3_sys>;
+ vcc3-supply = <&vcc3v3_sys>;
+ vcc4-supply = <&vcc3v3_sys>;
+ vcc6-supply = <&vcc3v3_sys>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc3v3_sys>;
+ vcc10-supply = <&vcc3v3_sys>;
+ vcc11-supply = <&vcc3v3_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG1 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcc1v8_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel1_gpio>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vsel2_gpio>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb1: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb1_int>;
+ vbus-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+};
+
+&i2c7 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: usb-typec@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc_vbus_typec0>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ audio-supply = <&vcca1v8_codec>;
+ bt656-supply = <&vcc_3v0>;
+ gpio1830-supply = <&vcc_3v0>;
+ sdmmc-supply = <&vcc_sdio>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pmic {
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ hub_rst: hub-rst {
+ rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+
+ usb-typec {
+ vcc_vbus_typec1_en: vcc-vbus-typec1-en {
+ rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ fusb30x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ fusb1_int: fusb1-int {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec0>;
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ phy-supply = <&vcc_vbus_typec1>;
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399-rock960.dtsi"
+
+/ {
+ model = "96boards Rock960";
+ compatible = "vamrs,rock960", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+};
+
+&pcie0 {
+ ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
+};
+
+&pinctrl {
+ pcie {
+ pcie_drv: pcie-drv {
+ rockchip,pins =
+ <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb2 {
+ host_vbus_drv: host-vbus-drv {
+ rockchip,pins =
+ <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "otg";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
+
+&vcc3v3_pcie {
+ gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&vcc5v0_host {
+ gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 Collabora Ltd.
+ * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ vcc1v8_s0: vcc1v8-s0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_drv>;
+ regulator-boot-on;
+ regulator-name = "vcc3v3_pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&host_vbus_drv>;
+ regulator-name = "vcc5v0_host";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 0>;
+ regulator-name = "vdd_log";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_cec>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ status = "okay";
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca1v8_hdmi: LDO_REG2 {
+ regulator-name = "vcca1v8_hdmi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG3 {
+ regulator-name = "vcca_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sd: LDO_REG4 {
+ regulator-name = "vcc_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc3v0_sd: LDO_REG5 {
+ regulator-name = "vcc3v0_sd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca0v9_hdmi: LDO_REG7 {
+ regulator-name = "vcca0v9_hdmi";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&io_domains {
+ bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
+ audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
+ sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
+ gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ num-lanes = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreqn_cpm>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+&pinctrl {
+ sdmmc {
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins =
+ <4 8 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 9 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 10 RK_FUNC_1 &pcfg_pull_up_8ma>,
+ <4 11 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins =
+ <4 12 RK_FUNC_1 &pcfg_pull_none_18ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins =
+ <4 13 RK_FUNC_1 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 21 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 17 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 14 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <100000 100000000>;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ sd-uhs-sdr104;
+ vqmmc-supply = <&vcc_sd>;
+ card-detect-delay = <800>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy0_otg {
+ status = "okay";
+};
+
+&u2phy1_otg {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
+ * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Pine64 RockPro64";
+ compatible = "pine64,rockpro64", "rockchip,rk3399";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ dc_12v: dc-12v {
+ compatible = "regulator-fixed";
+ regulator-name = "dc_12v";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ autorepeat;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwrbtn>;
+
+ power {
+ debounce-interval = <100>;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+ label = "GPIO Key Power";
+ linux,code = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+
+ work-led {
+ label = "work";
+ default-state = "on";
+ gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
+ diy-led {
+ label = "diy";
+ default-state = "off";
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk808 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ /* switched by pmic_sleep */
+ vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc1v8_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pwr_en>;
+ regulator-name = "vcc3v3_pcie";
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&dc_12v>;
+ };
+
+ vcc3v3_sys: vcc3v3-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_sys>;
+ };
+
+ /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
+ vdd_log: vdd-log {
+ compatible = "pwm-regulator";
+ pwms = <&pwm2 0 25000 1>;
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <&vcc_sys>;
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ i2c-scl-rising-time-ns = <168>;
+ i2c-scl-falling-time-ns = <4>;
+ status = "okay";
+
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc_sys>;
+ vcc2-supply = <&vcc_sys>;
+ vcc3-supply = <&vcc_sys>;
+ vcc4-supply = <&vcc_sys>;
+ vcc6-supply = <&vcc_sys>;
+ vcc7-supply = <&vcc_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc_sys>;
+ vcc10-supply = <&vcc_sys>;
+ vcc11-supply = <&vcc_sys>;
+ vcc12-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc1v8_pmu>;
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-name = "vdd_center";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-name = "vdd_cpu_l";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc_1v8: DCDC_REG4 {
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc1v8_dvp: LDO_REG1 {
+ regulator-name = "vcc1v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc2v8_dvp: LDO_REG2 {
+ regulator-name = "vcc2v8_dvp";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc1v8_pmu: LDO_REG3 {
+ regulator-name = "vcc1v8_pmu";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc_sdio: LDO_REG4 {
+ regulator-name = "vcc_sdio";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcca3v0_codec: LDO_REG5 {
+ regulator-name = "vcca3v0_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-name = "vcc_1v5";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1500000>;
+ };
+ };
+
+ vcca1v8_codec: LDO_REG7 {
+ regulator-name = "vcca1v8_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG8 {
+ regulator-name = "vcc_3v0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3000000>;
+ };
+ };
+
+ vcc3v3_s3: vcc_lan: SWITCH_REG1 {
+ regulator-name = "vcc3v3_s3";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc3v3_s0: SWITCH_REG2 {
+ regulator-name = "vcc3v3_s0";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ fcs,suspend-voltage-selector = <0>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <300>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c3 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&i2c4 {
+ i2c-scl-rising-time-ns = <600>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ fusb0: typec-portc@22 {
+ compatible = "fcs,fusb302";
+ reg = <0x22>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&fusb0_int>;
+ vbus-supply = <&vcc5v0_typec>;
+ status = "okay";
+ };
+};
+
+&i2s0 {
+ rockchip,playback-channels = <8>;
+ rockchip,capture-channels = <8>;
+ status = "okay";
+};
+
+&i2s1 {
+ rockchip,playback-channels = <2>;
+ rockchip,capture-channels = <2>;
+ status = "okay";
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc1v8_dvp>;
+ audio-supply = <&vcca1v8_codec>;
+ sdmmc-supply = <&vcc_sdio>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ pmu1830-supply = <&vcc_3v0>;
+ status = "okay";
+};
+
+&pinctrl {
+ buttons {
+ pwrbtn: pwrbtn {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ fusb302x {
+ fusb0_int: fusb0-int {
+ rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ leds {
+ work_led_gpio: work_led-gpio {
+ rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ diy_led_gpio: diy_led-gpio {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ lcd-panel {
+ lcd_panel_reset: lcd-panel-reset {
+ rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie_pwr_en: pcie-pwr-en {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0_typec_en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcca1v8_s3>;
+ status = "okay";
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ max-frequency = <150000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-mode = <1>;
+ /* tshut polarity 0:LOW 1:HIGH */
+ rockchip,hw-tshut-polarity = <1>;
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
vin-supply = <&vcc_1v8>;
};
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-always-on;
+ regulator-max-microvolt = <3000000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-name = "vcc3v0_sd";
+ vin-supply = <&vcc3v3_sys>;
+ };
+
vcc3v3_sys: vcc3v3-sys {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
vin-supply = <&vcc_sys>;
};
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_host_en>;
regulator-name = "vcc5v0_host";
vin-supply = <&vcc_sys>;
};
+ vcc5v0_typec0: vcc5v0-typec0-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec0_en>;
+ regulator-name = "vcc5v0_typec0";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&dc_12v>;
+ };
+
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm2 0 25000 1>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l &pmic_dvs2>;
+ pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
};
- pmic_dvs2: pmic-dvs2 {
- rockchip,pins =
- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
vsel1_gpio: vsel1-gpio {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
};
+ sd {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins =
+ <RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb2 {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins =
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
};
+ vcc5v0_typec0_en: vcc5v0-typec0-en {
+ rockchip,pins =
+ <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
};
};
};
&sdmmc {
+ broken-cd;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
status = "okay";
u2phy0_otg: otg-port {
+ phy-supply = <&vcc5v0_typec0>;
status = "okay";
};
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l1: cpu@1 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l2: cpu@2 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_l3: cpu@3 {
clocks = <&cru ARMCLKL>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <100>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b0: cpu@100 {
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
};
cpu_b1: cpu@101 {
clocks = <&cru ARMCLKB>;
#cooling-cells = <2>; /* min followed by max */
dynamic-power-coefficient = <436>;
+ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
+ };
+
+ idle-states {
+ entry-method = "psci";
+
+ CPU_SLEEP: cpu-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
+ };
+
+ CLUSTER_SLEEP: cluster-sleep {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <500>;
+ min-residency-us = <2000>;
+ };
};
};
resets = <&cru SRST_P_MIPI_DSI0>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
resets = <&cru SRST_P_MIPI_DSI1>;
reset-names = "apb";
rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "disabled";
ports {
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
<&mio_clk 12>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
<&mio_rst 12>;
+ phy-names = "usb";
+ phys = <&usb_phy0>;
has-transaction-translator;
};
<&mio_clk 13>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
<&mio_rst 13>;
+ phy-names = "usb";
+ phys = <&usb_phy1>;
has-transaction-translator;
};
<&mio_clk 14>;
resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
<&mio_rst 14>;
+ phy-names = "usb";
+ phys = <&usb_phy2>;
has-transaction-translator;
};
pinctrl: pinctrl {
compatible = "socionext,uniphier-ld11-pinctrl";
};
+
+ usb-phy {
+ compatible = "socionext,uniphier-ld11-usb2-phy";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ usb_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ usb_phy2: phy@2 {
+ reg = <2>;
+ #phy-cells = <0>;
+ };
+ };
};
soc-glue@5f900000 {
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
&nand {
status = "okay";
};
+
+&usb {
+ status = "okay";
+};
drive-strength = <9>;
};
};
+
+&usb {
+ status = "okay";
+};
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi2: spi@54006200 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006200 0x100>;
+ interrupts = <0 229 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi3: spi@54006300 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006300 0x100>;
+ interrupts = <0 230 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-ld20-soc-glue",
"simple-mfd", "syscon";
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
};
};
+ usb: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host";
+ interrupts = <0 134 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb1>,
+ <&pinctrl_usb2>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
+ resets = <&usb_rst 15>;
+ phys = <&usb_hsphy0>, <&usb_hsphy1>,
+ <&usb_hsphy2>, <&usb_hsphy3>,
+ <&usb_ssphy0>, <&usb_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-ld20-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb_rst: reset@0 {
+ compatible = "socionext,uniphier-ld20-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus2: regulator@120 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x120 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_vbus3: regulator@130 {
+ compatible = "socionext,uniphier-ld20-usb3-regulator";
+ reg = <0x130 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 14>;
+ reset-names = "link";
+ resets = <&sys_rst 14>;
+ };
+
+ usb_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 16>;
+ vbus-supply = <&usb_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb_hsphy2: hs-phy@220 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x220 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb_vbus2>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb_hsphy3: hs-phy@230 {
+ compatible = "socionext,uniphier-ld20-usb3-hsphy";
+ reg = <0x230 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 17>;
+ vbus-supply = <&usb_vbus3>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 18>;
+ vbus-supply = <&usb_vbus0>;
+ };
+
+ usb_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-ld20-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 14>, <&sys_clk 19>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 14>, <&sys_rst 19>;
+ vbus-supply = <&usb_vbus1>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
status = "okay";
};
+&sd {
+ status = "okay";
+};
+
ð0 {
status = "okay";
phy-handle = <ðphy0>;
&nand {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
+ spi0: spi@54006000 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006000 0x100>;
+ interrupts = <0 39 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
+ spi1: spi@54006100 {
+ compatible = "socionext,uniphier-scssi";
+ status = "disabled";
+ reg = <0x54006100 0x100>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ clocks = <&peri_clk 11>;
+ resets = <&peri_rst 11>;
+ };
+
serial0: serial@54006800 {
compatible = "socionext,uniphier-uart";
status = "disabled";
cdns,phy-dll-delay-sdclk-hsmmc = <21>;
};
+ sd: sdhc@5a400000 {
+ compatible = "socionext,uniphier-sd-v3.1.1";
+ status = "disabled";
+ reg = <0x5a400000 0x800>;
+ interrupts = <0 76 4>;
+ pinctrl-names = "default", "uhs";
+ pinctrl-0 = <&pinctrl_sd>;
+ pinctrl-1 = <&pinctrl_sd_uhs>;
+ clocks = <&sd_clk 0>;
+ reset-names = "host";
+ resets = <&sd_rst 0>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ };
+
soc_glue: soc-glue@5f800000 {
compatible = "socionext,uniphier-pxs3-soc-glue",
"simple-mfd", "syscon";
efuse@200 {
compatible = "socionext,uniphier-efuse";
reg = <0x200 0x68>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ /* USB cells */
+ usb_rterm0: trim@54,4 {
+ reg = <0x54 1>;
+ bits = <4 2>;
+ };
+ usb_rterm1: trim@55,4 {
+ reg = <0x55 1>;
+ bits = <4 2>;
+ };
+ usb_rterm2: trim@58,4 {
+ reg = <0x58 1>;
+ bits = <4 2>;
+ };
+ usb_rterm3: trim@59,4 {
+ reg = <0x59 1>;
+ bits = <4 2>;
+ };
+ usb_sel_t0: trim@54,0 {
+ reg = <0x54 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t1: trim@55,0 {
+ reg = <0x55 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t2: trim@58,0 {
+ reg = <0x58 1>;
+ bits = <0 4>;
+ };
+ usb_sel_t3: trim@59,0 {
+ reg = <0x59 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i0: trim@56,0 {
+ reg = <0x56 1>;
+ bits = <0 4>;
+ };
+ usb_hs_i2: trim@5a,0 {
+ reg = <0x5a 1>;
+ bits = <0 4>;
+ };
};
};
};
};
+ usb0: usb@65a00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65a00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 134 4>, <0 135 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
+ resets = <&usb0_rst 15>;
+ phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
+ <&usb0_ssphy0>, <&usb0_ssphy1>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65b00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65b00000 0x400>;
+
+ usb0_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 12>;
+ reset-names = "link";
+ resets = <&sys_rst 12>;
+ };
+
+ usb0_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 16>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 16>;
+ vbus-supply = <&usb0_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm1>, <&usb_sel_t1>,
+ <&usb_hs_i0>;
+ };
+
+ usb0_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 17>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 17>;
+ vbus-supply = <&usb0_vbus0>;
+ };
+
+ usb0_ssphy1: ss-phy@310 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x310 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy";
+ clocks = <&sys_clk 12>, <&sys_clk 18>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 12>, <&sys_rst 18>;
+ vbus-supply = <&usb0_vbus1>;
+ };
+ };
+
+ usb1: usb@65c00000 {
+ compatible = "socionext,uniphier-dwc3", "snps,dwc3";
+ status = "disabled";
+ reg = <0x65c00000 0xcd00>;
+ interrupt-names = "host", "peripheral";
+ interrupts = <0 137 4>, <0 138 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
+ clock-names = "ref", "bus_early", "suspend";
+ clocks = <&sys_clk 13>, <&sys_clk 13>, <&sys_clk 13>;
+ resets = <&usb1_rst 15>;
+ phys = <&usb1_hsphy0>, <&usb1_hsphy1>,
+ <&usb1_ssphy0>;
+ dr_mode = "host";
+ };
+
+ usb-glue@65d00000 {
+ compatible = "socionext,uniphier-pxs3-dwc3-glue",
+ "simple-mfd";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x65d00000 0x400>;
+
+ usb1_rst: reset@0 {
+ compatible = "socionext,uniphier-pxs3-usb3-reset";
+ reg = <0x0 0x4>;
+ #reset-cells = <1>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus0: regulator@100 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x100 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_vbus1: regulator@110 {
+ compatible = "socionext,uniphier-pxs3-usb3-regulator";
+ reg = <0x110 0x10>;
+ clock-names = "link";
+ clocks = <&sys_clk 13>;
+ reset-names = "link";
+ resets = <&sys_rst 13>;
+ };
+
+ usb1_hsphy0: hs-phy@200 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x200 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus0>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm2>, <&usb_sel_t2>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_hsphy1: hs-phy@210 {
+ compatible = "socionext,uniphier-pxs3-usb3-hsphy";
+ reg = <0x210 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 20>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 20>;
+ vbus-supply = <&usb1_vbus1>;
+ nvmem-cell-names = "rterm", "sel_t", "hs_i";
+ nvmem-cells = <&usb_rterm3>, <&usb_sel_t3>,
+ <&usb_hs_i2>;
+ };
+
+ usb1_ssphy0: ss-phy@300 {
+ compatible = "socionext,uniphier-pxs3-usb3-ssphy";
+ reg = <0x300 0x10>;
+ #phy-cells = <0>;
+ clock-names = "link", "phy", "phy-ext";
+ clocks = <&sys_clk 13>, <&sys_clk 21>,
+ <&sys_clk 14>;
+ reset-names = "link", "phy";
+ resets = <&sys_rst 13>, <&sys_rst 21>;
+ vbus-supply = <&usb1_vbus0>;
+ };
+ };
+
nand: nand@68000000 {
compatible = "socionext,uniphier-denali-nand-v5b";
status = "disabled";
interrupts = <0 65 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
- clocks = <&sys_clk 2>;
+ clock-names = "nand", "nand_x", "ecc";
+ clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
resets = <&sys_rst 2>;
};
};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2018 Synaptics Incorporated
+ *
+ * Author: Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "syna,as370";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a53", "arm,armv8";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ next-level-cache = <&l2>;
+ cpu-idle-states = <&CPU_SLEEP_0>;
+ };
+
+ l2: cache {
+ compatible = "cache";
+ };
+
+ idle-states {
+ entry-method = "psci";
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ local-timer-stop;
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <75>;
+ exit-latency-us = <155>;
+ min-residency-us = <1000>;
+ };
+ };
+ };
+
+ osc: osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>,
+ <&cpu1>,
+ <&cpu2>,
+ <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ soc@f7000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0xf7000000 0x1000000>;
+
+ gic: interrupt-controller@901000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x901000 0x1000>,
+ <0x902000 0x2000>,
+ <0x904000 0x2000>,
+ <0x906000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ apb@e80000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xe80000 0x10000>;
+
+ uart0: serial@c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xc00 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&osc>;
+ reg-shift = <2>;
+ status = "disabled";
+ };
+
+ gpio0: gpio@1800 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x1800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porta: gpio-port@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@2000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x2000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portb: gpio-port@1 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+ };
+ };
+};
&cbass_main {
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
ranges;
#interrupt-cells = <3>;
interrupt-controller;
- reg = <0x01800000 0x10000>, /* GICD */
- <0x01880000 0x90000>; /* GICR */
+ reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
+ <0x00 0x01880000 0x00 0x90000>; /* GICR */
/*
* vcpumntirq:
* virtual CPU interface maintenance interrupt
gic_its: gic-its@18200000 {
compatible = "arm,gic-v3-its";
- reg = <0x01820000 0x10000>;
+ reg = <0x00 0x01820000 0x00 0x10000>;
msi-controller;
#msi-cells = <1>;
};
};
+
+ secure_proxy_main: mailbox@32c00000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x00 0x32c00000 0x00 0x100000>,
+ <0x00 0x32400000 0x00 0x100000>,
+ <0x00 0x32800000 0x00 0x100000>;
+ interrupt-names = "rx_011";
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ main_uart0: serial@2800000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02800000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+
+ main_uart1: serial@2810000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02810000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+
+ main_uart2: serial@2820000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x02820000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_mcu {
+ mcu_uart0: serial@40a00000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x40a00000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <96000000>;
+ current-speed = <115200>;
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_wakeup {
+ dmsc: dmsc {
+ compatible = "ti,k2g-sci";
+ ti,host-id = <12>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mbox-names = "rx", "tx";
+
+ mboxes= <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
+
+ k3_pds: power-controller {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <1>;
+ };
+
+ k3_clks: clocks {
+ compatible = "ti,k2g-sci-clk";
+ #clock-cells = <2>;
+ };
+
+ k3_reset: reset-controller {
+ compatible = "ti,sci-reset";
+ #reset-cells = <2>;
+ };
+ };
+
+ wkup_uart0: serial@42300000 {
+ compatible = "ti,am654-uart";
+ reg = <0x00 0x42300000 0x00 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <48000000>;
+ current-speed = <115200>;
+ };
+};
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ serial3 = &main_uart1;
+ serial4 = &main_uart2;
+ };
+
chosen { };
firmware {
cbass_main: interconnect@100000 {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */
- <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */
- <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */
- <0x01000000 0x00 0x01000000 0x0af02400>, /* Most peripherals */
- <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+ <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
/* MCUSS Range */
- <0x28380000 0x00 0x28380000 0x03880000>,
- <0x40200000 0x00 0x40200000 0x00900100>,
- <0x42040000 0x00 0x42040000 0x03ac2400>,
- <0x45100000 0x00 0x45100000 0x00c24000>,
- <0x46000000 0x00 0x46000000 0x00200000>,
- <0x47000000 0x00 0x47000000 0x00068400>;
+ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>;
cbass_mcu: interconnect@28380000 {
compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x28380000 0x28380000 0x03880000>, /* MCU NAVSS*/
- <0x40200000 0x40200000 0x00900100>, /* First peripheral window */
- <0x42040000 0x42040000 0x03ac2400>, /* WKUP */
- <0x45100000 0x45100000 0x00c24000>, /* MMRs, remaining NAVSS */
- <0x46000000 0x46000000 0x00200000>, /* CPSW */
- <0x47000000 0x47000000 0x00068400>; /* OSPI space 1 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
+ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+ <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>; /* OSPI space 1 */
cbass_wakeup: interconnect@42040000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
/* WKUP Basic peripherals */
- ranges = <0x42040000 0x42040000 0x03ac2400>;
+ ranges = <0x42040000 0x00 0x42040000 0x03ac2400>;
};
};
};
/* Now include the peripherals for each bus segments */
#include "k3-am65-main.dtsi"
+#include "k3-am65-mcu.dtsi"
+#include "k3-am65-wakeup.dtsi"
};
};
};
+
+&wkup_uart0 {
+ /* Wakeup UART is used by System firmware */
+ status = "disabled";
+};
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * pinctrl-tegra-io-pad.h: Tegra I/O pad source voltage configuration constants
+ * pinctrl bindings.
+ *
+ * Copyright (c) 2018, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Aapo Vienamo <avienamo@nvidia.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_IO_PAD_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_IO_PAD_H
+
+/* Voltage levels of the I/O pad's source rail */
+#define TEGRA_IO_PAD_VOLTAGE_1V8 0
+#define TEGRA_IO_PAD_VOLTAGE_3V3 1
+
+#endif
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) */
+/*
+ * Actions Semi S900 SPS
+ *
+ * Copyright (c) 2018 Linaro Ltd.
+ */
+#ifndef DT_BINDINGS_POWER_OWL_S900_POWERGATE_H
+#define DT_BINDINGS_POWER_OWL_S900_POWERGATE_H
+
+#define S900_PD_GPU_B 0
+#define S900_PD_VCE 1
+#define S900_PD_SENSOR 2
+#define S900_PD_VDE 3
+#define S900_PD_HDE 4
+#define S900_PD_USB3 5
+#define S900_PD_DDR0 6
+#define S900_PD_DDR1 7
+#define S900_PD_DE 8
+#define S900_PD_NAND 9
+#define S900_PD_USB2_H0 10
+#define S900_PD_USB2_H1 11
+
+#endif
projects / platform / kernel / linux-starfive.git / commitdiff