eeprom: at24: remove struct at24_client
authorHeiner Kallweit <hkallweit1@gmail.com>
Sun, 28 Nov 2021 18:14:50 +0000 (19:14 +0100)
committerBartosz Golaszewski <brgl@bgdev.pl>
Wed, 1 Dec 2021 11:57:06 +0000 (12:57 +0100)
We use member client only to get a reference to the associated struct
device, via &client->dev. However we can get the same reference from
the associated regmap, via regmap_get_device(regmap).
Therefore struct at24_client can be removed and replaced with a regmap
pointer.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
drivers/misc/eeprom/at24.c

index 49ab656..4d91c71 100644 (file)
  * which won't work on pure SMBus systems.
  */
 
-struct at24_client {
-       struct i2c_client *client;
-       struct regmap *regmap;
-};
-
 struct at24_data {
        /*
         * Lock protects against activities from other Linux tasks,
@@ -94,9 +89,9 @@ struct at24_data {
 
        /*
         * Some chips tie up multiple I2C addresses; dummy devices reserve
-        * them for us, and we'll use them with SMBus calls.
+        * them for us.
         */
-       struct at24_client client[];
+       struct regmap *client_regmaps[];
 };
 
 /*
@@ -275,8 +270,8 @@ MODULE_DEVICE_TABLE(acpi, at24_acpi_ids);
  * set the byte address; on a multi-master board, another master
  * may have changed the chip's "current" address pointer.
  */
-static struct at24_client *at24_translate_offset(struct at24_data *at24,
-                                                unsigned int *offset)
+static struct regmap *at24_translate_offset(struct at24_data *at24,
+                                           unsigned int *offset)
 {
        unsigned int i;
 
@@ -288,12 +283,12 @@ static struct at24_client *at24_translate_offset(struct at24_data *at24,
                *offset &= 0xff;
        }
 
-       return &at24->client[i];
+       return at24->client_regmaps[i];
 }
 
 static struct device *at24_base_client_dev(struct at24_data *at24)
 {
-       return &at24->client[0].client->dev;
+       return regmap_get_device(at24->client_regmaps[0]);
 }
 
 static size_t at24_adjust_read_count(struct at24_data *at24,
@@ -324,14 +319,10 @@ static ssize_t at24_regmap_read(struct at24_data *at24, char *buf,
                                unsigned int offset, size_t count)
 {
        unsigned long timeout, read_time;
-       struct at24_client *at24_client;
-       struct i2c_client *client;
        struct regmap *regmap;
        int ret;
 
-       at24_client = at24_translate_offset(at24, &offset);
-       regmap = at24_client->regmap;
-       client = at24_client->client;
+       regmap = at24_translate_offset(at24, &offset);
        count = at24_adjust_read_count(at24, offset, count);
 
        /* adjust offset for mac and serial read ops */
@@ -346,7 +337,7 @@ static ssize_t at24_regmap_read(struct at24_data *at24, char *buf,
                read_time = jiffies;
 
                ret = regmap_bulk_read(regmap, offset, buf, count);
-               dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n",
+               dev_dbg(regmap_get_device(regmap), "read %zu@%d --> %d (%ld)\n",
                        count, offset, ret, jiffies);
                if (!ret)
                        return count;
@@ -387,14 +378,10 @@ static ssize_t at24_regmap_write(struct at24_data *at24, const char *buf,
                                 unsigned int offset, size_t count)
 {
        unsigned long timeout, write_time;
-       struct at24_client *at24_client;
-       struct i2c_client *client;
        struct regmap *regmap;
        int ret;
 
-       at24_client = at24_translate_offset(at24, &offset);
-       regmap = at24_client->regmap;
-       client = at24_client->client;
+       regmap = at24_translate_offset(at24, &offset);
        count = at24_adjust_write_count(at24, offset, count);
        timeout = jiffies + msecs_to_jiffies(at24_write_timeout);
 
@@ -406,7 +393,7 @@ static ssize_t at24_regmap_write(struct at24_data *at24, const char *buf,
                write_time = jiffies;
 
                ret = regmap_bulk_write(regmap, offset, buf, count);
-               dev_dbg(&client->dev, "write %zu@%d --> %d (%ld)\n",
+               dev_dbg(regmap_get_device(regmap), "write %zu@%d --> %d (%ld)\n",
                        count, offset, ret, jiffies);
                if (!ret)
                        return count;
@@ -538,16 +525,14 @@ static const struct at24_chip_data *at24_get_chip_data(struct device *dev)
 }
 
 static int at24_make_dummy_client(struct at24_data *at24, unsigned int index,
+                                 struct i2c_client *base_client,
                                  struct regmap_config *regmap_config)
 {
-       struct i2c_client *base_client, *dummy_client;
+       struct i2c_client *dummy_client;
        struct regmap *regmap;
-       struct device *dev;
-
-       base_client = at24->client[0].client;
-       dev = &base_client->dev;
 
-       dummy_client = devm_i2c_new_dummy_device(dev, base_client->adapter,
+       dummy_client = devm_i2c_new_dummy_device(&base_client->dev,
+                                                base_client->adapter,
                                                 base_client->addr + index);
        if (IS_ERR(dummy_client))
                return PTR_ERR(dummy_client);
@@ -556,8 +541,7 @@ static int at24_make_dummy_client(struct at24_data *at24, unsigned int index,
        if (IS_ERR(regmap))
                return PTR_ERR(regmap);
 
-       at24->client[index].client = dummy_client;
-       at24->client[index].regmap = regmap;
+       at24->client_regmaps[index] = regmap;
 
        return 0;
 }
@@ -680,7 +664,7 @@ static int at24_probe(struct i2c_client *client)
        if (IS_ERR(regmap))
                return PTR_ERR(regmap);
 
-       at24 = devm_kzalloc(dev, struct_size(at24, client, num_addresses),
+       at24 = devm_kzalloc(dev, struct_size(at24, client_regmaps, num_addresses),
                            GFP_KERNEL);
        if (!at24)
                return -ENOMEM;
@@ -692,8 +676,7 @@ static int at24_probe(struct i2c_client *client)
        at24->read_post = cdata->read_post;
        at24->num_addresses = num_addresses;
        at24->offset_adj = at24_get_offset_adj(flags, byte_len);
-       at24->client[0].client = client;
-       at24->client[0].regmap = regmap;
+       at24->client_regmaps[0] = regmap;
 
        at24->vcc_reg = devm_regulator_get(dev, "vcc");
        if (IS_ERR(at24->vcc_reg))
@@ -709,7 +692,7 @@ static int at24_probe(struct i2c_client *client)
 
        /* use dummy devices for multiple-address chips */
        for (i = 1; i < num_addresses; i++) {
-               err = at24_make_dummy_client(at24, i, &regmap_config);
+               err = at24_make_dummy_client(at24, i, client, &regmap_config);
                if (err)
                        return err;
        }