mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload
authorJohan Hovold <jhovold@gmail.com>
Wed, 13 Mar 2013 16:11:59 +0000 (17:11 +0100)
committerChris Ball <cjb@laptop.org>
Fri, 22 Mar 2013 16:57:22 +0000 (12:57 -0400)
Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add
pdc support and runtime capabilities detection") which removed the need
for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the
compile guards around dma_release_channel() in remove(). Consequently,
DMA is always enabled (if supported), but the DMA-channel is not
released on module unload unless the DMA-config option is selected.

Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
arch/arm/configs/at91sam9g45_defconfig
arch/avr32/configs/favr-32_defconfig
arch/avr32/configs/merisc_defconfig
drivers/mmc/host/Kconfig
drivers/mmc/host/atmel-mci.c

index 606d48f..8aab786 100644 (file)
@@ -173,7 +173,6 @@ CONFIG_MMC=y
 # CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_SDIO_UART=m
 CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
 CONFIG_LEDS_ATMEL_PWM=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGER_TIMER=y
index 0421498..9791820 100644 (file)
@@ -122,7 +122,6 @@ CONFIG_USB_G_SERIAL=m
 CONFIG_USB_CDC_COMPOSITE=m
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_ATMEL_PWM=m
index 3befab9..65de443 100644 (file)
@@ -102,7 +102,6 @@ CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_MMC=y
 CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_ATMELMCI_DMA=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_ATMEL_PWM=y
index d88219e..9c581c2 100644 (file)
@@ -300,16 +300,6 @@ config MMC_ATMELMCI
 
          If unsure, say N.
 
-config MMC_ATMELMCI_DMA
-       bool "Atmel MCI DMA support"
-       depends on MMC_ATMELMCI && (AVR32 || ARCH_AT91SAM9G45) && DMA_ENGINE
-       help
-         Say Y here to have the Atmel MCI driver use a DMA engine to
-         do data transfers and thus increase the throughput and
-         reduce the CPU utilization.
-
-         If unsure, say N.
-
 config MMC_MSM
        tristate "Qualcomm SDCC Controller Support"
        depends on MMC && ARCH_MSM
index 722af1d..10f8b73 100644 (file)
@@ -2487,10 +2487,8 @@ static int __exit atmci_remove(struct platform_device *pdev)
        atmci_readl(host, ATMCI_SR);
        clk_disable(host->mck);
 
-#ifdef CONFIG_MMC_ATMELMCI_DMA
        if (host->dma.chan)
                dma_release_channel(host->dma.chan);
-#endif
 
        free_irq(platform_get_irq(pdev, 0), host);
        iounmap(host->regs);