--- /dev/null
+/*
+ * Copyright 2012-15 Advanced Micro Devices, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: AMD
+ *
+ */
+
+#include "reg_helper.h"
+
+#include <linux/delay.h>
+#include "core_types.h"
+#include "link_encoder.h"
+#include "dcn21_link_encoder.h"
+#include "stream_encoder.h"
+
+#include "i2caux_interface.h"
+#include "dc_bios_types.h"
+
+#include "gpio_service_interface.h"
+
+#define CTX \
+ enc10->base.ctx
+#define DC_LOGGER \
+ enc10->base.ctx->logger
+
+#define REG(reg)\
+ (enc10->link_regs->reg)
+
+#undef FN
+#define FN(reg_name, field_name) \
+ enc10->link_shift->field_name, enc10->link_mask->field_name
+
+#define IND_REG(index) \
+ (enc10->link_regs->index)
+
+static struct mpll_cfg dcn21_mpll_cfg_ref[] = {
+ // RBR
+ {
+ .hdmimode_enable = 0,
+ .ref_range = 1,
+ .ref_clk_mpllb_div = 1,
+ .mpllb_ssc_en = 1,
+ .mpllb_div5_clk_en = 1,
+ .mpllb_multiplier = 238,
+ .mpllb_fracn_en = 0,
+ .mpllb_fracn_quot = 0,
+ .mpllb_fracn_rem = 0,
+ .mpllb_fracn_den = 1,
+ .mpllb_ssc_up_spread = 0,
+ .mpllb_ssc_peak = 44237,
+ .mpllb_ssc_stepsize = 59454,
+ .mpllb_div_clk_en = 0,
+ .mpllb_div_multiplier = 0,
+ .mpllb_hdmi_div = 0,
+ .mpllb_tx_clk_div = 2,
+ .tx_vboost_lvl = 5,
+ .mpllb_pmix_en = 1,
+ .mpllb_word_div2_en = 0,
+ .mpllb_ana_v2i = 2,
+ .mpllb_ana_freq_vco = 2,
+ .mpllb_ana_cp_int = 9,
+ .mpllb_ana_cp_prop = 15,
+ .hdmi_pixel_clk_div = 0,
+ },
+ // HBR
+ {
+ .hdmimode_enable = 0,
+ .ref_range = 1,
+ .ref_clk_mpllb_div = 1,
+ .mpllb_ssc_en = 1,
+ .mpllb_div5_clk_en = 1,
+ .mpllb_multiplier = 192,
+ .mpllb_fracn_en = 1,
+ .mpllb_fracn_quot = 32768,
+ .mpllb_fracn_rem = 0,
+ .mpllb_fracn_den = 1,
+ .mpllb_ssc_up_spread = 0,
+ .mpllb_ssc_peak = 36864,
+ .mpllb_ssc_stepsize = 49545,
+ .mpllb_div_clk_en = 0,
+ .mpllb_div_multiplier = 0,
+ .mpllb_hdmi_div = 0,
+ .mpllb_tx_clk_div = 1,
+ .tx_vboost_lvl = 5,
+ .mpllb_pmix_en = 1,
+ .mpllb_word_div2_en = 0,
+ .mpllb_ana_v2i = 2,
+ .mpllb_ana_freq_vco = 3,
+ .mpllb_ana_cp_int = 9,
+ .mpllb_ana_cp_prop = 15,
+ .hdmi_pixel_clk_div = 0,
+ },
+ //HBR2
+ {
+ .hdmimode_enable = 0,
+ .ref_range = 1,
+ .ref_clk_mpllb_div = 1,
+ .mpllb_ssc_en = 1,
+ .mpllb_div5_clk_en = 1,
+ .mpllb_multiplier = 192,
+ .mpllb_fracn_en = 1,
+ .mpllb_fracn_quot = 32768,
+ .mpllb_fracn_rem = 0,
+ .mpllb_fracn_den = 1,
+ .mpllb_ssc_up_spread = 0,
+ .mpllb_ssc_peak = 36864,
+ .mpllb_ssc_stepsize = 49545,
+ .mpllb_div_clk_en = 0,
+ .mpllb_div_multiplier = 0,
+ .mpllb_hdmi_div = 0,
+ .mpllb_tx_clk_div = 0,
+ .tx_vboost_lvl = 5,
+ .mpllb_pmix_en = 1,
+ .mpllb_word_div2_en = 0,
+ .mpllb_ana_v2i = 2,
+ .mpllb_ana_freq_vco = 3,
+ .mpllb_ana_cp_int = 9,
+ .mpllb_ana_cp_prop = 15,
+ .hdmi_pixel_clk_div = 0,
+ },
+ //HBR3
+ {
+ .hdmimode_enable = 0,
+ .ref_range = 1,
+ .ref_clk_mpllb_div = 1,
+ .mpllb_ssc_en = 1,
+ .mpllb_div5_clk_en = 1,
+ .mpllb_multiplier = 304,
+ .mpllb_fracn_en = 1,
+ .mpllb_fracn_quot = 49152,
+ .mpllb_fracn_rem = 0,
+ .mpllb_fracn_den = 1,
+ .mpllb_ssc_up_spread = 0,
+ .mpllb_ssc_peak = 55296,
+ .mpllb_ssc_stepsize = 74318,
+ .mpllb_div_clk_en = 0,
+ .mpllb_div_multiplier = 0,
+ .mpllb_hdmi_div = 0,
+ .mpllb_tx_clk_div = 0,
+ .tx_vboost_lvl = 5,
+ .mpllb_pmix_en = 1,
+ .mpllb_word_div2_en = 0,
+ .mpllb_ana_v2i = 2,
+ .mpllb_ana_freq_vco = 1,
+ .mpllb_ana_cp_int = 7,
+ .mpllb_ana_cp_prop = 16,
+ .hdmi_pixel_clk_div = 0,
+ },
+};
+
+
+static bool update_cfg_data(
+ struct dcn10_link_encoder *enc10,
+ const struct dc_link_settings *link_settings,
+ struct dpcssys_phy_seq_cfg *cfg)
+{
+ int i;
+
+ cfg->load_sram_fw = false;
+ cfg->use_calibration_setting = true;
+
+ //TODO: need to implement a proper lane mapping for Renoir.
+ for (i = 0; i < 4; i++)
+ cfg->lane_en[i] = true;
+
+ switch (link_settings->link_rate) {
+ case LINK_RATE_LOW:
+ cfg->mpll_cfg = dcn21_mpll_cfg_ref[0];
+ break;
+ case LINK_RATE_HIGH:
+ cfg->mpll_cfg = dcn21_mpll_cfg_ref[1];
+ break;
+ case LINK_RATE_HIGH2:
+ cfg->mpll_cfg = dcn21_mpll_cfg_ref[2];
+ break;
+ case LINK_RATE_HIGH3:
+ cfg->mpll_cfg = dcn21_mpll_cfg_ref[3];
+ break;
+ default:
+ DC_LOG_ERROR("%s: No supported link rate found %X!\n",
+ __func__, link_settings->link_rate);
+ return false;
+ }
+
+ return true;
+}
+
+void dcn21_link_encoder_enable_dp_output(
+ struct link_encoder *enc,
+ const struct dc_link_settings *link_settings,
+ enum clock_source_id clock_source)
+{
+ struct dcn10_link_encoder *enc10 = TO_DCN10_LINK_ENC(enc);
+ struct dcn21_link_encoder *enc21 = (struct dcn21_link_encoder *) enc10;
+ struct dpcssys_phy_seq_cfg *cfg = &enc21->phy_seq_cfg;
+
+ if (!enc->ctx->dc->debug.avoid_vbios_exec_table) {
+ dcn10_link_encoder_enable_dp_output(enc, link_settings, clock_source);
+ return;
+ }
+
+ if (!update_cfg_data(enc10, link_settings, cfg))
+ return;
+
+ enc1_configure_encoder(enc10, link_settings);
+
+ dcn10_link_encoder_setup(enc, SIGNAL_TYPE_DISPLAY_PORT);
+
+}
+
+void dcn21_link_encoder_disable_output(
+ struct link_encoder *enc,
+ enum signal_type signal)
+{
+ dcn10_link_encoder_disable_output(enc, signal);
+
+}
+static const struct link_encoder_funcs dcn21_link_enc_funcs = {
+#ifdef CONFIG_DRM_AMD_DC_DSC_SUPPORT
+ .read_state = link_enc2_read_state,
+#endif
+ .validate_output_with_stream =
+ dcn10_link_encoder_validate_output_with_stream,
+ .hw_init = enc2_hw_init,
+ .setup = dcn10_link_encoder_setup,
+ .enable_tmds_output = dcn10_link_encoder_enable_tmds_output,
+ .enable_dp_output = dcn21_link_encoder_enable_dp_output,
+ .enable_dp_mst_output = dcn10_link_encoder_enable_dp_mst_output,
+ .disable_output = dcn21_link_encoder_disable_output,
+ .dp_set_lane_settings = dcn10_link_encoder_dp_set_lane_settings,
+ .dp_set_phy_pattern = dcn10_link_encoder_dp_set_phy_pattern,
+ .update_mst_stream_allocation_table =
+ dcn10_link_encoder_update_mst_stream_allocation_table,
+ .psr_program_dp_dphy_fast_training =
+ dcn10_psr_program_dp_dphy_fast_training,
+ .psr_program_secondary_packet = dcn10_psr_program_secondary_packet,
+ .connect_dig_be_to_fe = dcn10_link_encoder_connect_dig_be_to_fe,
+ .enable_hpd = dcn10_link_encoder_enable_hpd,
+ .disable_hpd = dcn10_link_encoder_disable_hpd,
+ .is_dig_enabled = dcn10_is_dig_enabled,
+ .destroy = dcn10_link_encoder_destroy,
+ .fec_set_enable = enc2_fec_set_enable,
+ .fec_set_ready = enc2_fec_set_ready,
+ .fec_is_active = enc2_fec_is_active,
+ .get_dig_frontend = dcn10_get_dig_frontend,
+};
+
+void dcn21_link_encoder_construct(
+ struct dcn21_link_encoder *enc21,
+ const struct encoder_init_data *init_data,
+ const struct encoder_feature_support *enc_features,
+ const struct dcn10_link_enc_registers *link_regs,
+ const struct dcn10_link_enc_aux_registers *aux_regs,
+ const struct dcn10_link_enc_hpd_registers *hpd_regs,
+ const struct dcn10_link_enc_shift *link_shift,
+ const struct dcn10_link_enc_mask *link_mask)
+{
+ struct bp_encoder_cap_info bp_cap_info = {0};
+ const struct dc_vbios_funcs *bp_funcs = init_data->ctx->dc_bios->funcs;
+ enum bp_result result = BP_RESULT_OK;
+ struct dcn10_link_encoder *enc10 = &enc21->enc10;
+
+ enc10->base.funcs = &dcn21_link_enc_funcs;
+ enc10->base.ctx = init_data->ctx;
+ enc10->base.id = init_data->encoder;
+
+ enc10->base.hpd_source = init_data->hpd_source;
+ enc10->base.connector = init_data->connector;
+
+ enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+
+ enc10->base.features = *enc_features;
+
+ enc10->base.transmitter = init_data->transmitter;
+
+ /* set the flag to indicate whether driver poll the I2C data pin
+ * while doing the DP sink detect
+ */
+
+/* if (dal_adapter_service_is_feature_supported(as,
+ FEATURE_DP_SINK_DETECT_POLL_DATA_PIN))
+ enc10->base.features.flags.bits.
+ DP_SINK_DETECT_POLL_DATA_PIN = true;*/
+
+ enc10->base.output_signals =
+ SIGNAL_TYPE_DVI_SINGLE_LINK |
+ SIGNAL_TYPE_DVI_DUAL_LINK |
+ SIGNAL_TYPE_LVDS |
+ SIGNAL_TYPE_DISPLAY_PORT |
+ SIGNAL_TYPE_DISPLAY_PORT_MST |
+ SIGNAL_TYPE_EDP |
+ SIGNAL_TYPE_HDMI_TYPE_A;
+
+ /* For DCE 8.0 and 8.1, by design, UNIPHY is hardwired to DIG_BE.
+ * SW always assign DIG_FE 1:1 mapped to DIG_FE for non-MST UNIPHY.
+ * SW assign DIG_FE to non-MST UNIPHY first and MST last. So prefer
+ * DIG is per UNIPHY and used by SST DP, eDP, HDMI, DVI and LVDS.
+ * Prefer DIG assignment is decided by board design.
+ * For DCE 8.0, there are only max 6 UNIPHYs, we assume board design
+ * and VBIOS will filter out 7 UNIPHY for DCE 8.0.
+ * By this, adding DIGG should not hurt DCE 8.0.
+ * This will let DCE 8.1 share DCE 8.0 as much as possible
+ */
+
+ enc10->link_regs = link_regs;
+ enc10->aux_regs = aux_regs;
+ enc10->hpd_regs = hpd_regs;
+ enc10->link_shift = link_shift;
+ enc10->link_mask = link_mask;
+
+ switch (enc10->base.transmitter) {
+ case TRANSMITTER_UNIPHY_A:
+ enc10->base.preferred_engine = ENGINE_ID_DIGA;
+ break;
+ case TRANSMITTER_UNIPHY_B:
+ enc10->base.preferred_engine = ENGINE_ID_DIGB;
+ break;
+ case TRANSMITTER_UNIPHY_C:
+ enc10->base.preferred_engine = ENGINE_ID_DIGC;
+ break;
+ case TRANSMITTER_UNIPHY_D:
+ enc10->base.preferred_engine = ENGINE_ID_DIGD;
+ break;
+ case TRANSMITTER_UNIPHY_E:
+ enc10->base.preferred_engine = ENGINE_ID_DIGE;
+ break;
+ case TRANSMITTER_UNIPHY_F:
+ enc10->base.preferred_engine = ENGINE_ID_DIGF;
+ break;
+ case TRANSMITTER_UNIPHY_G:
+ enc10->base.preferred_engine = ENGINE_ID_DIGG;
+ break;
+ default:
+ ASSERT_CRITICAL(false);
+ enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
+ }
+
+ /* default to one to mirror Windows behavior */
+ enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
+
+ result = bp_funcs->get_encoder_cap_info(enc10->base.ctx->dc_bios,
+ enc10->base.id, &bp_cap_info);
+
+ /* Override features with DCE-specific values */
+ if (result == BP_RESULT_OK) {
+ enc10->base.features.flags.bits.IS_HBR2_CAPABLE =
+ bp_cap_info.DP_HBR2_EN;
+ enc10->base.features.flags.bits.IS_HBR3_CAPABLE =
+ bp_cap_info.DP_HBR3_EN;
+ enc10->base.features.flags.bits.HDMI_6GB_EN = bp_cap_info.HDMI_6GB_EN;
+ enc10->base.features.flags.bits.DP_IS_USB_C =
+ bp_cap_info.DP_IS_USB_C;
+ } else {
+ DC_LOG_WARNING("%s: Failed to get encoder_cap_info from VBIOS with error code %d!\n",
+ __func__,
+ result);
+ }
+ if (enc10->base.ctx->dc->debug.hdmi20_disable) {
+ enc10->base.features.flags.bits.HDMI_6GB_EN = 0;
+ }
+}
#include "dce110/dce110_hw_sequencer.h"
#include "dcn20/dcn20_opp.h"
#include "dcn20/dcn20_dsc.h"
-#include "dcn20/dcn20_link_encoder.h"
+#include "dcn21/dcn21_link_encoder.h"
#include "dcn20/dcn20_stream_encoder.h"
#include "dce/dce_clock_source.h"
#include "dce/dce_audio.h"
.create_hwseq = dcn21_hwseq_create,
};
+static const struct encoder_feature_support link_enc_feature = {
+ .max_hdmi_deep_color = COLOR_DEPTH_121212,
+ .max_hdmi_pixel_clock = 600000,
+ .hdmi_ycbcr420_supported = true,
+ .dp_ycbcr420_supported = true,
+ .flags.bits.IS_HBR2_CAPABLE = true,
+ .flags.bits.IS_HBR3_CAPABLE = true,
+ .flags.bits.IS_TPS3_CAPABLE = true,
+ .flags.bits.IS_TPS4_CAPABLE = true
+};
+
+
+#define link_regs(id, phyid)\
+[id] = {\
+ LE_DCN10_REG_LIST(id), \
+ UNIPHY_DCN2_REG_LIST(phyid), \
+ SRI(DP_DPHY_INTERNAL_CTRL, DP, id) \
+}
+
+static const struct dcn10_link_enc_registers link_enc_regs[] = {
+ link_regs(0, A),
+ link_regs(1, B),
+ link_regs(2, C),
+ link_regs(3, D),
+ link_regs(4, E),
+};
+
+#define aux_regs(id)\
+[id] = {\
+ DCN2_AUX_REG_LIST(id)\
+}
+
+static const struct dcn10_link_enc_aux_registers link_enc_aux_regs[] = {
+ aux_regs(0),
+ aux_regs(1),
+ aux_regs(2),
+ aux_regs(3),
+ aux_regs(4)
+};
+
+#define hpd_regs(id)\
+[id] = {\
+ HPD_REG_LIST(id)\
+}
+
+static const struct dcn10_link_enc_hpd_registers link_enc_hpd_regs[] = {
+ hpd_regs(0),
+ hpd_regs(1),
+ hpd_regs(2),
+ hpd_regs(3),
+ hpd_regs(4)
+};
+
+static const struct dcn10_link_enc_shift le_shift = {
+ LINK_ENCODER_MASK_SH_LIST_DCN20(__SHIFT)
+};
+
+static const struct dcn10_link_enc_mask le_mask = {
+ LINK_ENCODER_MASK_SH_LIST_DCN20(_MASK)
+};
+
+static struct link_encoder *dcn21_link_encoder_create(
+ const struct encoder_init_data *enc_init_data)
+{
+ struct dcn21_link_encoder *enc21 =
+ kzalloc(sizeof(struct dcn21_link_encoder), GFP_KERNEL);
+
+ if (!enc21)
+ return NULL;
+
+ dcn21_link_encoder_construct(enc21,
+ enc_init_data,
+ &link_enc_feature,
+ &link_enc_regs[enc_init_data->transmitter],
+ &link_enc_aux_regs[enc_init_data->channel - 1],
+ &link_enc_hpd_regs[enc_init_data->hpd_source],
+ &le_shift,
+ &le_mask);
+
+ return &enc21->enc10.base;
+}
#define CTX ctx
#define REG(reg_name) \
static struct resource_funcs dcn21_res_pool_funcs = {
.destroy = dcn21_destroy_resource_pool,
- .link_enc_create = dcn20_link_encoder_create,
+ .link_enc_create = dcn21_link_encoder_create,
.validate_bandwidth = dcn21_validate_bandwidth,
.add_stream_to_ctx = dcn20_add_stream_to_ctx,
.remove_stream_from_ctx = dcn20_remove_stream_from_ctx,
projects / platform / kernel / linux-rpi.git / commitdiff