Contact: linux-mtd@lists.infradead.org
Description:
This allows the user to examine and adjust the criteria by which
- mtd returns -EUCLEAN from mtd_read(). If the maximum number of
- bit errors that were corrected on any single region comprising
- an ecc step (as reported by the driver) equals or exceeds this
- value, -EUCLEAN is returned. Otherwise, absent an error, 0 is
- returned. Higher layers (e.g., UBI) use this return code as an
- indication that an erase block may be degrading and should be
- scrutinized as a candidate for being marked as bad.
+ mtd returns -EUCLEAN from mtd_read() and mtd_read_oob(). If the
+ maximum number of bit errors that were corrected on any single
+ region comprising an ecc step (as reported by the driver) equals
+ or exceeds this value, -EUCLEAN is returned. Otherwise, absent
+ an error, 0 is returned. Higher layers (e.g., UBI) use this
+ return code as an indication that an erase block may be
+ degrading and should be scrutinized as a candidate for being
+ marked as bad.
The initial value may be specified by the flash device driver.
If not, then the default value is ecc_strength.
block degradation, but high enough to avoid the consequences of
a persistent return value of -EUCLEAN on devices where sticky
bitflips occur. Note that if bitflip_threshold exceeds
- ecc_strength, -EUCLEAN is never returned by mtd_read().
+ ecc_strength, -EUCLEAN is never returned by the read operations.
Conversely, if bitflip_threshold is zero, -EUCLEAN is always
returned, absent a hard error.
from RGB to Y'CbCr color space.
</entry>
</row>
- <row id = "v4l2-jpeg-chroma-subsampling">
+ <row>
<entrytbl spanname="descr" cols="2">
<tbody valign="top">
<row>
processing controls. These controls are described in <xref
linkend="image-process-controls" />.</entry>
</row>
- <row>
- <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
- <entry>0x9d0000</entry>
- <entry>The class containing JPEG compression controls.
-These controls are described in <xref
- linkend="jpeg-controls" />.</entry>
- </row>
</tbody>
</tgroup>
</table>
MX6Q_PAD_SD2_DAT3__GPIO_1_12 1588
MX6Q_PAD_SD2_DAT3__SJC_DONE 1589
MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 1590
+MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID 1591
+MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID 1592
http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
More information about kexec-tools can be found at
-http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html
+http://horms.net/projects/kexec/
3) Unpack the tarball with the tar command, as follows:
F: drivers/idle/i7300_idle.c
IEEE 802.15.4 SUBSYSTEM
+M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-M: Sergey Lapin <slapin@ossfans.org>
L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
W: http://apps.sourceforge.net/trac/linux-zigbee
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
S: Maintained
F: net/ieee802154/
+F: net/mac802154/
F: drivers/ieee802154/
IIO SUBSYSTEM AND DRIVERS
L: linux-omap@vger.kernel.org
S: Maintained
F: arch/arm/*omap*/*pm*
+F: drivers/cpufreq/omap-cpufreq.c
OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT
M: Rajendra Nayak <rnayak@ti.com>
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
+M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Sony Chacko <sony.chacko@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
F: drivers/net/ethernet/qlogic/qlcnic/
QLOGIC QLGE 10Gb ETHERNET DRIVER
-M: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
M: Peter Zijlstra <peterz@infradead.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
S: Maintained
-F: kernel/sched*
+F: kernel/sched/
F: include/linux/sched.h
SCORE ARCHITECTURE
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION =
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
select GENERIC_SMP_IDLE_THREAD
select KTIME_SCALAR
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+ select GENERIC_STRNCPY_FROM_USER
+ select GENERIC_STRNLEN_USER
+ select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
bootloaders, this option allows zImage to extract the information
from the ATAG list and store it at run time into the appended DTB.
+choice
+ prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
+ default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
+ bool "Use bootloader kernel arguments if available"
+ help
+ Uses the command-line options passed by the boot loader instead of
+ the device tree bootargs property. If the boot loader doesn't provide
+ any, the device tree bootargs property will be used.
+
+config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
+ bool "Extend with bootloader kernel arguments"
+ help
+ The command-line arguments provided by the boot loader will be
+ appended to the the device tree bootargs property.
+
+endchoice
+
config CMDLINE
string "Default kernel command string"
default ""
help
Perform tests of kprobes API and instruction set simulation.
+config PID_IN_CONTEXTIDR
+ bool "Write the current PID to the CONTEXTIDR register"
+ depends on CPU_COPY_V6
+ help
+ Enabling this option causes the kernel to write the current PID to
+ the PROCID field of the CONTEXTIDR register, at the expense of some
+ additional instructions during context switch. Say Y here only if you
+ are planning to use hardware trace tools with this kernel.
+
endmenu
#
# Copyright (C) 1995-2001 by Russell King
+# Ensure linker flags are correct
+LDFLAGS :=
+
LDFLAGS_vmlinux :=-p --no-undefined -X
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
#include <asm/setup.h>
#include <libfdt.h>
+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
+#define do_extend_cmdline 1
+#else
+#define do_extend_cmdline 0
+#endif
+
static int node_offset(void *fdt, const char *node_path)
{
int offset = fdt_path_offset(fdt, node_path);
return fdt_setprop_cell(fdt, offset, property, val);
}
+static const void *getprop(const void *fdt, const char *node_path,
+ const char *property, int *len)
+{
+ int offset = fdt_path_offset(fdt, node_path);
+
+ if (offset == -FDT_ERR_NOTFOUND)
+ return NULL;
+
+ return fdt_getprop(fdt, offset, property, len);
+}
+
+static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
+{
+ char cmdline[COMMAND_LINE_SIZE];
+ const char *fdt_bootargs;
+ char *ptr = cmdline;
+ int len = 0;
+
+ /* copy the fdt command line into the buffer */
+ fdt_bootargs = getprop(fdt, "/chosen", "bootargs", &len);
+ if (fdt_bootargs)
+ if (len < COMMAND_LINE_SIZE) {
+ memcpy(ptr, fdt_bootargs, len);
+ /* len is the length of the string
+ * including the NULL terminator */
+ ptr += len - 1;
+ }
+
+ /* and append the ATAG_CMDLINE */
+ if (fdt_cmdline) {
+ len = strlen(fdt_cmdline);
+ if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
+ *ptr++ = ' ';
+ memcpy(ptr, fdt_cmdline, len);
+ ptr += len;
+ }
+ }
+ *ptr = '\0';
+
+ setprop_string(fdt, "/chosen", "bootargs", cmdline);
+}
+
/*
* Convert and fold provided ATAGs into the provided FDT.
*
for_each_tag(atag, atag_list) {
if (atag->hdr.tag == ATAG_CMDLINE) {
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
+ /* Append the ATAGS command line to the device tree
+ * command line.
+ * NB: This means that if the same parameter is set in
+ * the device tree and in the tags, the one from the
+ * tags will be chosen.
+ */
+ if (do_extend_cmdline)
+ merge_fdt_bootargs(fdt,
+ atag->u.cmdline.cmdline);
+ else
+ setprop_string(fdt, "/chosen", "bootargs",
+ atag->u.cmdline.cmdline);
} else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 8 0x04
- 0 9 0x04>;
+ interrupts = <0 6 0x04
+ 0 7 0x04>;
};
L2: l2-cache {
gmac0: eth@e2000000 {
compatible = "st,spear600-gmac";
reg = <0xe2000000 0x8000>;
- interrupts = <0 23 0x4
- 0 24 0x4>;
+ interrupts = <0 33 0x4
+ 0 34 0x4>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
kbd@e0300000 {
compatible = "st,spear300-kbd";
reg = <0xe0300000 0x1000>;
+ interrupts = <0 52 0x4>;
status = "disabled";
};
serial@e0000000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xe0000000 0x1000>;
- interrupts = <0 36 0x4>;
+ interrupts = <0 35 0x4>;
status = "disabled";
};
/include/ "spear320.dtsi"
/ {
- model = "ST SPEAr300 Evaluation Board";
- compatible = "st,spear300-evb", "st,spear300";
+ model = "ST SPEAr320 Evaluation Board";
+ compatible = "st,spear320-evb", "st,spear320";
#address-cells = <1>;
#size-cells = <1>;
ahb {
pinmux@b3000000 {
- st,pinmux-mode = <3>;
+ st,pinmux-mode = <4>;
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
timer@f0000000 {
compatible = "st,spear-timer";
reg = <0xf0000000 0x400>;
+ interrupt-parent = <&vic0>;
interrupts = <16>;
};
};
CONFIG_USB_DEVICEFS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_LIBUSUAL=y
#ifndef __ASMARM_ARCH_TIMER_H
#define __ASMARM_ARCH_TIMER_H
+#include <asm/errno.h>
+
#ifdef CONFIG_ARM_ARCH_TIMER
+#define ARCH_HAS_READ_CURRENT_TIMER
int arch_timer_of_register(void);
int arch_timer_sched_clock_init(void);
#else
#ifndef __ASM_ARM_DELAY_H
#define __ASM_ARM_DELAY_H
+#include <asm/memory.h>
#include <asm/param.h> /* HZ */
-extern void __delay(int loops);
+#define MAX_UDELAY_MS 2
+#define UDELAY_MULT ((UL(2199023) * HZ) >> 11)
+#define UDELAY_SHIFT 30
+
+#ifndef __ASSEMBLY__
+
+extern struct arm_delay_ops {
+ void (*delay)(unsigned long);
+ void (*const_udelay)(unsigned long);
+ void (*udelay)(unsigned long);
+} arm_delay_ops;
+
+#define __delay(n) arm_delay_ops.delay(n)
/*
* This function intentionally does not exist; if you see references to
* division by multiplication: you don't have to worry about
* loss of precision.
*
- * Use only for very small delays ( < 1 msec). Should probably use a
+ * Use only for very small delays ( < 2 msec). Should probably use a
* lookup table, really, as the multiplications take much too long with
* short delays. This is a "reasonable" implementation, though (and the
* first constant multiplications gets optimized away if the delay is
* a constant)
*/
-extern void __udelay(unsigned long usecs);
-extern void __const_udelay(unsigned long);
-
-#define MAX_UDELAY_MS 2
+#define __udelay(n) arm_delay_ops.udelay(n)
+#define __const_udelay(n) arm_delay_ops.const_udelay(n)
#define udelay(n) \
(__builtin_constant_p(n) ? \
((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() : \
- __const_udelay((n) * ((2199023U*HZ)>>11))) : \
+ __const_udelay((n) * UDELAY_MULT)) : \
__udelay(n))
+/* Loop-based definitions for assembly code. */
+extern void __loop_delay(unsigned long loops);
+extern void __loop_udelay(unsigned long usecs);
+extern void __loop_const_udelay(unsigned long);
+
+#endif /* __ASSEMBLY__ */
+
#endif /* defined(_ARM_DELAY_H) */
+++ /dev/null
-/*
- * arch/arm/include/asm/locks.h
- *
- * Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Interrupt safe locking assembler.
- */
-#ifndef __ASM_PROC_LOCKS_H
-#define __ASM_PROC_LOCKS_H
-
-#if __LINUX_ARM_ARCH__ >= 6
-
-#define __down_op(ptr,fail) \
- ({ \
- __asm__ __volatile__( \
- "@ down_op\n" \
-"1: ldrex lr, [%0]\n" \
-" sub lr, lr, %1\n" \
-" strex ip, lr, [%0]\n" \
-" teq ip, #0\n" \
-" bne 1b\n" \
-" teq lr, #0\n" \
-" movmi ip, %0\n" \
-" blmi " #fail \
- : \
- : "r" (ptr), "I" (1) \
- : "ip", "lr", "cc"); \
- smp_mb(); \
- })
-
-#define __down_op_ret(ptr,fail) \
- ({ \
- unsigned int ret; \
- __asm__ __volatile__( \
- "@ down_op_ret\n" \
-"1: ldrex lr, [%1]\n" \
-" sub lr, lr, %2\n" \
-" strex ip, lr, [%1]\n" \
-" teq ip, #0\n" \
-" bne 1b\n" \
-" teq lr, #0\n" \
-" movmi ip, %1\n" \
-" movpl ip, #0\n" \
-" blmi " #fail "\n" \
-" mov %0, ip" \
- : "=&r" (ret) \
- : "r" (ptr), "I" (1) \
- : "ip", "lr", "cc"); \
- smp_mb(); \
- ret; \
- })
-
-#define __up_op(ptr,wake) \
- ({ \
- smp_mb(); \
- __asm__ __volatile__( \
- "@ up_op\n" \
-"1: ldrex lr, [%0]\n" \
-" add lr, lr, %1\n" \
-" strex ip, lr, [%0]\n" \
-" teq ip, #0\n" \
-" bne 1b\n" \
-" cmp lr, #0\n" \
-" movle ip, %0\n" \
-" blle " #wake \
- : \
- : "r" (ptr), "I" (1) \
- : "ip", "lr", "cc"); \
- })
-
-/*
- * The value 0x01000000 supports up to 128 processors and
- * lots of processes. BIAS must be chosen such that sub'ing
- * BIAS once per CPU will result in the long remaining
- * negative.
- */
-#define RW_LOCK_BIAS 0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-#define __down_op_write(ptr,fail) \
- ({ \
- __asm__ __volatile__( \
- "@ down_op_write\n" \
-"1: ldrex lr, [%0]\n" \
-" sub lr, lr, %1\n" \
-" strex ip, lr, [%0]\n" \
-" teq ip, #0\n" \
-" bne 1b\n" \
-" teq lr, #0\n" \
-" movne ip, %0\n" \
-" blne " #fail \
- : \
- : "r" (ptr), "I" (RW_LOCK_BIAS) \
- : "ip", "lr", "cc"); \
- smp_mb(); \
- })
-
-#define __up_op_write(ptr,wake) \
- ({ \
- smp_mb(); \
- __asm__ __volatile__( \
- "@ up_op_write\n" \
-"1: ldrex lr, [%0]\n" \
-" adds lr, lr, %1\n" \
-" strex ip, lr, [%0]\n" \
-" teq ip, #0\n" \
-" bne 1b\n" \
-" movcs ip, %0\n" \
-" blcs " #wake \
- : \
- : "r" (ptr), "I" (RW_LOCK_BIAS) \
- : "ip", "lr", "cc"); \
- })
-
-#define __down_op_read(ptr,fail) \
- __down_op(ptr, fail)
-
-#define __up_op_read(ptr,wake) \
- ({ \
- smp_mb(); \
- __asm__ __volatile__( \
- "@ up_op_read\n" \
-"1: ldrex lr, [%0]\n" \
-" add lr, lr, %1\n" \
-" strex ip, lr, [%0]\n" \
-" teq ip, #0\n" \
-" bne 1b\n" \
-" teq lr, #0\n" \
-" moveq ip, %0\n" \
-" bleq " #wake \
- : \
- : "r" (ptr), "I" (1) \
- : "ip", "lr", "cc"); \
- })
-
-#else
-
-#define __down_op(ptr,fail) \
- ({ \
- __asm__ __volatile__( \
- "@ down_op\n" \
-" mrs ip, cpsr\n" \
-" orr lr, ip, #128\n" \
-" msr cpsr_c, lr\n" \
-" ldr lr, [%0]\n" \
-" subs lr, lr, %1\n" \
-" str lr, [%0]\n" \
-" msr cpsr_c, ip\n" \
-" movmi ip, %0\n" \
-" blmi " #fail \
- : \
- : "r" (ptr), "I" (1) \
- : "ip", "lr", "cc"); \
- smp_mb(); \
- })
-
-#define __down_op_ret(ptr,fail) \
- ({ \
- unsigned int ret; \
- __asm__ __volatile__( \
- "@ down_op_ret\n" \
-" mrs ip, cpsr\n" \
-" orr lr, ip, #128\n" \
-" msr cpsr_c, lr\n" \
-" ldr lr, [%1]\n" \
-" subs lr, lr, %2\n" \
-" str lr, [%1]\n" \
-" msr cpsr_c, ip\n" \
-" movmi ip, %1\n" \
-" movpl ip, #0\n" \
-" blmi " #fail "\n" \
-" mov %0, ip" \
- : "=&r" (ret) \
- : "r" (ptr), "I" (1) \
- : "ip", "lr", "cc"); \
- smp_mb(); \
- ret; \
- })
-
-#define __up_op(ptr,wake) \
- ({ \
- smp_mb(); \
- __asm__ __volatile__( \
- "@ up_op\n" \
-" mrs ip, cpsr\n" \
-" orr lr, ip, #128\n" \
-" msr cpsr_c, lr\n" \
-" ldr lr, [%0]\n" \
-" adds lr, lr, %1\n" \
-" str lr, [%0]\n" \
-" msr cpsr_c, ip\n" \
-" movle ip, %0\n" \
-" blle " #wake \
- : \
- : "r" (ptr), "I" (1) \
- : "ip", "lr", "cc"); \
- })
-
-/*
- * The value 0x01000000 supports up to 128 processors and
- * lots of processes. BIAS must be chosen such that sub'ing
- * BIAS once per CPU will result in the long remaining
- * negative.
- */
-#define RW_LOCK_BIAS 0x01000000
-#define RW_LOCK_BIAS_STR "0x01000000"
-
-#define __down_op_write(ptr,fail) \
- ({ \
- __asm__ __volatile__( \
- "@ down_op_write\n" \
-" mrs ip, cpsr\n" \
-" orr lr, ip, #128\n" \
-" msr cpsr_c, lr\n" \
-" ldr lr, [%0]\n" \
-" subs lr, lr, %1\n" \
-" str lr, [%0]\n" \
-" msr cpsr_c, ip\n" \
-" movne ip, %0\n" \
-" blne " #fail \
- : \
- : "r" (ptr), "I" (RW_LOCK_BIAS) \
- : "ip", "lr", "cc"); \
- smp_mb(); \
- })
-
-#define __up_op_write(ptr,wake) \
- ({ \
- __asm__ __volatile__( \
- "@ up_op_write\n" \
-" mrs ip, cpsr\n" \
-" orr lr, ip, #128\n" \
-" msr cpsr_c, lr\n" \
-" ldr lr, [%0]\n" \
-" adds lr, lr, %1\n" \
-" str lr, [%0]\n" \
-" msr cpsr_c, ip\n" \
-" movcs ip, %0\n" \
-" blcs " #wake \
- : \
- : "r" (ptr), "I" (RW_LOCK_BIAS) \
- : "ip", "lr", "cc"); \
- smp_mb(); \
- })
-
-#define __down_op_read(ptr,fail) \
- __down_op(ptr, fail)
-
-#define __up_op_read(ptr,wake) \
- ({ \
- smp_mb(); \
- __asm__ __volatile__( \
- "@ up_op_read\n" \
-" mrs ip, cpsr\n" \
-" orr lr, ip, #128\n" \
-" msr cpsr_c, lr\n" \
-" ldr lr, [%0]\n" \
-" adds lr, lr, %1\n" \
-" str lr, [%0]\n" \
-" msr cpsr_c, ip\n" \
-" moveq ip, %0\n" \
-" bleq " #wake \
- : \
- : "r" (ptr), "I" (1) \
- : "ip", "lr", "cc"); \
- })
-
-#endif
-
-#endif
#include <linux/compiler.h>
#include <linux/const.h>
#include <linux/types.h>
-#include <asm/sizes.h>
+#include <linux/sizes.h>
#ifdef CONFIG_NEED_MACH_MEMORY_H
#include <mach/memory.h>
#ifndef __ARM_PERF_EVENT_H__
#define __ARM_PERF_EVENT_H__
-/* ARM perf PMU IDs for use by internal perf clients. */
-enum arm_perf_pmu_ids {
- ARM_PERF_PMU_ID_XSCALE1 = 0,
- ARM_PERF_PMU_ID_XSCALE2,
- ARM_PERF_PMU_ID_V6,
- ARM_PERF_PMU_ID_V6MP,
- ARM_PERF_PMU_ID_CA8,
- ARM_PERF_PMU_ID_CA9,
- ARM_PERF_PMU_ID_CA5,
- ARM_PERF_PMU_ID_CA15,
- ARM_PERF_PMU_ID_CA7,
- ARM_NUM_PMU_IDS,
-};
-
-extern enum arm_perf_pmu_ids
-armpmu_get_pmu_id(void);
+/* Nothing to see here... */
#endif /* __ARM_PERF_EVENT_H__ */
struct arm_pmu {
struct pmu pmu;
- enum arm_perf_pmu_ids id;
enum arm_pmu_type type;
cpumask_t active_irqs;
- const char *name;
+ char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
void (*enable)(struct hw_perf_event *evt, int idx);
void (*disable)(struct hw_perf_event *evt, int idx);
}
/*
- * ARMv6 Spin-locking.
+ * ARMv6 ticket-based spin-locking.
*
- * We exclusively read the old value. If it is zero, we may have
- * won the lock, so we try exclusively storing it. A memory barrier
- * is required after we get a lock, and before we release it, because
- * V6 CPUs are assumed to have weakly ordered memory.
- *
- * Unlocked value: 0
- * Locked value: 1
+ * A memory barrier is required after we get a lock, and before we
+ * release it, because V6 CPUs are assumed to have weakly ordered
+ * memory.
*/
-#define arch_spin_is_locked(x) ((x)->lock != 0)
#define arch_spin_unlock_wait(lock) \
do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
unsigned long tmp;
+ u32 newval;
+ arch_spinlock_t lockval;
__asm__ __volatile__(
-"1: ldrex %0, [%1]\n"
-" teq %0, #0\n"
- WFE("ne")
-" strexeq %0, %2, [%1]\n"
-" teqeq %0, #0\n"
+"1: ldrex %0, [%3]\n"
+" add %1, %0, %4\n"
+" strex %2, %1, [%3]\n"
+" teq %2, #0\n"
" bne 1b"
- : "=&r" (tmp)
- : "r" (&lock->lock), "r" (1)
+ : "=&r" (lockval), "=&r" (newval), "=&r" (tmp)
+ : "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
: "cc");
+ while (lockval.tickets.next != lockval.tickets.owner) {
+ wfe();
+ lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner);
+ }
+
smp_mb();
}
static inline int arch_spin_trylock(arch_spinlock_t *lock)
{
unsigned long tmp;
+ u32 slock;
__asm__ __volatile__(
-" ldrex %0, [%1]\n"
-" teq %0, #0\n"
-" strexeq %0, %2, [%1]"
- : "=&r" (tmp)
- : "r" (&lock->lock), "r" (1)
+" ldrex %0, [%2]\n"
+" subs %1, %0, %0, ror #16\n"
+" addeq %0, %0, %3\n"
+" strexeq %1, %0, [%2]"
+ : "=&r" (slock), "=&r" (tmp)
+ : "r" (&lock->slock), "I" (1 << TICKET_SHIFT)
: "cc");
if (tmp == 0) {
static inline void arch_spin_unlock(arch_spinlock_t *lock)
{
+ unsigned long tmp;
+ u32 slock;
+
smp_mb();
__asm__ __volatile__(
-" str %1, [%0]\n"
- :
- : "r" (&lock->lock), "r" (0)
+" mov %1, #1\n"
+"1: ldrex %0, [%2]\n"
+" uadd16 %0, %0, %1\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (slock), "=&r" (tmp)
+ : "r" (&lock->slock)
: "cc");
dsb_sev();
}
+static inline int arch_spin_is_locked(arch_spinlock_t *lock)
+{
+ struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets);
+ return tickets.owner != tickets.next;
+}
+
+static inline int arch_spin_is_contended(arch_spinlock_t *lock)
+{
+ struct __raw_tickets tickets = ACCESS_ONCE(lock->tickets);
+ return (tickets.next - tickets.owner) > 1;
+}
+#define arch_spin_is_contended arch_spin_is_contended
+
/*
* RWLOCKS
*
unsigned long tmp;
__asm__ __volatile__(
-"1: ldrex %0, [%1]\n"
+" ldrex %0, [%1]\n"
" teq %0, #0\n"
" strexeq %0, %2, [%1]"
: "=&r" (tmp)
unsigned long tmp, tmp2 = 1;
__asm__ __volatile__(
-"1: ldrex %0, [%2]\n"
+" ldrex %0, [%2]\n"
" adds %0, %0, #1\n"
" strexpl %1, %0, [%2]\n"
: "=&r" (tmp), "+r" (tmp2)
# error "please don't include this file directly"
#endif
+#define TICKET_SHIFT 16
+
typedef struct {
- volatile unsigned int lock;
+ union {
+ u32 slock;
+ struct __raw_tickets {
+#ifdef __ARMEB__
+ u16 next;
+ u16 owner;
+#else
+ u16 owner;
+ u16 next;
+#endif
+ } tickets;
+ };
} arch_spinlock_t;
-#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
+#define __ARCH_SPIN_LOCK_UNLOCKED { { 0 } }
typedef struct {
volatile unsigned int lock;
#ifndef _ASMARM_TIMEX_H
#define _ASMARM_TIMEX_H
+#include <asm/arch_timer.h>
#include <mach/timex.h>
typedef unsigned long cycles_t;
-static inline cycles_t get_cycles (void)
-{
- return 0;
-}
+#ifdef ARCH_HAS_READ_CURRENT_TIMER
+#define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; })
+#else
+#define get_cycles() (0)
+#endif
#endif
#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
+#define user_addr_max() \
+ (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
+
/*
* The "__xxx" versions of the user access functions do not verify the
* address space - it must have been done previously with a separate
#define __clear_user(addr,n) (memset((void __force *)addr, 0, n), 0)
#endif
-extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
-extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
-
static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
{
if (access_ok(VERIFY_READ, from, n))
return n;
}
-static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
-{
- long res = -EFAULT;
- if (access_ok(VERIFY_READ, src, 1))
- res = __strncpy_from_user(dst, src, count);
- return res;
-}
-
-#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
-static inline long __must_check strnlen_user(const char __user *s, long n)
-{
- unsigned long res = 0;
-
- if (__addr_ok(s))
- res = __strnlen_user(s, n);
-
- return res;
-}
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
#endif /* _ASMARM_UACCESS_H */
--- /dev/null
+#ifndef __ASM_ARM_WORD_AT_A_TIME_H
+#define __ASM_ARM_WORD_AT_A_TIME_H
+
+#ifndef __ARMEB__
+
+/*
+ * Little-endian word-at-a-time zero byte handling.
+ * Heavily based on the x86 algorithm.
+ */
+#include <linux/kernel.h>
+
+struct word_at_a_time {
+ const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits,
+ const struct word_at_a_time *c)
+{
+ unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+ *bits = mask;
+ return mask;
+}
+
+#define prep_zero_mask(a, bits, c) (bits)
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+ bits = (bits - 1) & ~bits;
+ return bits >> 7;
+}
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+ unsigned long ret;
+
+#if __LINUX_ARM_ARCH__ >= 5
+ /* We have clz available. */
+ ret = fls(mask) >> 3;
+#else
+ /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+ ret = (0x0ff0001 + mask) >> 23;
+ /* Fix the 1 for 00 case */
+ ret &= mask;
+#endif
+
+ return ret;
+}
+
+#ifdef CONFIG_DCACHE_WORD_ACCESS
+
+#define zero_bytemask(mask) (mask)
+
+/*
+ * Load an unaligned word from kernel space.
+ *
+ * In the (very unlikely) case of the word being a page-crosser
+ * and the next page not being mapped, take the exception and
+ * return zeroes in the non-existing part.
+ */
+static inline unsigned long load_unaligned_zeropad(const void *addr)
+{
+ unsigned long ret, offset;
+
+ /* Load word from unaligned pointer addr */
+ asm(
+ "1: ldr %0, [%2]\n"
+ "2:\n"
+ " .pushsection .fixup,\"ax\"\n"
+ " .align 2\n"
+ "3: and %1, %2, #0x3\n"
+ " bic %2, %2, #0x3\n"
+ " ldr %0, [%2]\n"
+ " lsl %1, %1, #0x3\n"
+ " lsr %0, %0, %1\n"
+ " b 2b\n"
+ " .popsection\n"
+ " .pushsection __ex_table,\"a\"\n"
+ " .align 3\n"
+ " .long 1b, 3b\n"
+ " .popsection"
+ : "=&r" (ret), "=&r" (offset)
+ : "r" (addr), "Qo" (*(unsigned long *)addr));
+
+ return ret;
+}
+
+
+#endif /* DCACHE_WORD_ACCESS */
+
+#else /* __ARMEB__ */
+#include <asm-generic/word-at-a-time.h>
+#endif
+
+#endif /* __ASM_ARM_WORD_AT_A_TIME_H */
static struct clock_event_device __percpu **arch_timer_evt;
+extern void init_current_timer_delay(unsigned long freq);
+
/*
* Architected system timer support.
*/
/* Be safe... */
arch_timer_disable();
- clk->features = CLOCK_EVT_FEAT_ONESHOT;
+ clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP;
clk->name = "arch_sys_timer";
clk->rating = 450;
clk->set_mode = arch_timer_set_mode;
return arch_counter_get_cntpct();
}
+int read_current_timer(unsigned long *timer_val)
+{
+ if (!arch_timer_rate)
+ return -ENXIO;
+ *timer_val = arch_counter_get_cntpct();
+ return 0;
+}
+
static struct clocksource clocksource_counter = {
.name = "arch_sys_counter",
.rating = 400,
if (err)
goto out_free_irq;
+ init_current_timer_delay(arch_timer_rate);
return 0;
out_free_irq:
extern void fpundefinstr(void);
/* platform dependent support */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(arm_delay_ops);
/* networking */
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(memchr);
EXPORT_SYMBOL(__memzero);
- /* user mem (segment) */
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-
#ifdef CONFIG_MMU
EXPORT_SYMBOL(copy_page);
add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE
.endm
-#ifdef CONFIG_XIP_KERNEL
-#define KERNEL_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
-#define KERNEL_END _edata_loc
-#else
-#define KERNEL_START KERNEL_RAM_VADDR
-#define KERNEL_END _end
-#endif
-
/*
* Kernel startup entry point.
* ---------------------------
blo 1b
/*
- * Now setup the pagetables for our kernel direct
- * mapped region.
+ * Map our RAM from the start to the end of the kernel .bss section.
*/
- mov r3, pc
- mov r3, r3, lsr #SECTION_SHIFT
- orr r3, r7, r3, lsl #SECTION_SHIFT
- add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
- str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
- ldr r6, =(KERNEL_END - 1)
- add r0, r0, #1 << PMD_ORDER
+ add r0, r4, #PAGE_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
+ ldr r6, =(_end - 1)
+ orr r3, r8, r7
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
-1: cmp r0, r6
+1: str r3, [r0], #1 << PMD_ORDER
add r3, r3, #1 << SECTION_SHIFT
- strls r3, [r0], #1 << PMD_ORDER
+ cmp r0, r6
bls 1b
#ifdef CONFIG_XIP_KERNEL
/*
- * Map some ram to cover our .data and .bss areas.
+ * Map the kernel image separately as it is not located in RAM.
*/
- add r3, r8, #TEXT_OFFSET
- orr r3, r3, r7
- add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
- str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]!
- ldr r6, =(_end - 1)
- add r0, r0, #4
+#define XIP_START XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+ mov r3, pc
+ mov r3, r3, lsr #SECTION_SHIFT
+ orr r3, r7, r3, lsl #SECTION_SHIFT
+ add r0, r4, #(XIP_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER)
+ str r3, [r0, #((XIP_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]!
+ ldr r6, =(_edata_loc - 1)
+ add r0, r0, #1 << PMD_ORDER
add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
1: cmp r0, r6
- add r3, r3, #1 << 20
- strls r3, [r0], #4
+ add r3, r3, #1 << SECTION_SHIFT
+ strls r3, [r0], #1 << PMD_ORDER
bls 1b
#endif
/*
- * Then map boot params address in r2 or the first 1MB (2MB with LPAE)
- * of ram if boot params address is not specified.
+ * Then map boot params address in r2 if specified.
*/
mov r0, r2, lsr #SECTION_SHIFT
movs r0, r0, lsl #SECTION_SHIFT
- moveq r0, r8
- sub r3, r0, r8
- add r3, r3, #PAGE_OFFSET
- add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
- orr r6, r7, r0
- str r6, [r3]
+ subne r3, r0, r8
+ addne r3, r3, #PAGE_OFFSET
+ addne r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
+ orrne r6, r7, r0
+ strne r6, [r3]
#ifdef CONFIG_DEBUG_LL
#if !defined(CONFIG_DEBUG_ICEDCC) && !defined(CONFIG_DEBUG_SEMIHOSTING)
/* Set at runtime when we know what CPU type we are. */
static struct arm_pmu *cpu_pmu;
-enum arm_perf_pmu_ids
-armpmu_get_pmu_id(void)
+const char *perf_pmu_name(void)
{
- int id = -ENODEV;
-
- if (cpu_pmu != NULL)
- id = cpu_pmu->id;
+ if (!cpu_pmu)
+ return NULL;
- return id;
+ return cpu_pmu->pmu.name;
}
-EXPORT_SYMBOL_GPL(armpmu_get_pmu_id);
+EXPORT_SYMBOL_GPL(perf_pmu_name);
int perf_num_counters(void)
{
cpu_pmu->name, cpu_pmu->num_events);
cpu_pmu_init(cpu_pmu);
register_cpu_notifier(&pmu_cpu_notifier);
- armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
+ armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");
}
}
static struct arm_pmu armv6pmu = {
- .id = ARM_PERF_PMU_ID_V6,
.name = "v6",
.handle_irq = armv6pmu_handle_irq,
.enable = armv6pmu_enable_event,
}
static struct arm_pmu armv6mpcore_pmu = {
- .id = ARM_PERF_PMU_ID_V6MP,
.name = "v6mpcore",
.handle_irq = armv6pmu_handle_irq,
.enable = armv6pmu_enable_event,
static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
- armv7pmu.id = ARM_PERF_PMU_ID_CA8;
armv7pmu.name = "ARMv7 Cortex-A8";
armv7pmu.map_event = armv7_a8_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
- armv7pmu.id = ARM_PERF_PMU_ID_CA9;
armv7pmu.name = "ARMv7 Cortex-A9";
armv7pmu.map_event = armv7_a9_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
- armv7pmu.id = ARM_PERF_PMU_ID_CA5;
armv7pmu.name = "ARMv7 Cortex-A5";
armv7pmu.map_event = armv7_a5_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
- armv7pmu.id = ARM_PERF_PMU_ID_CA15;
armv7pmu.name = "ARMv7 Cortex-A15";
armv7pmu.map_event = armv7_a15_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
static struct arm_pmu *__init armv7_a7_pmu_init(void)
{
- armv7pmu.id = ARM_PERF_PMU_ID_CA7;
armv7pmu.name = "ARMv7 Cortex-A7";
armv7pmu.map_event = armv7_a7_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
}
static struct arm_pmu xscale1pmu = {
- .id = ARM_PERF_PMU_ID_XSCALE1,
.name = "xscale1",
.handle_irq = xscale1pmu_handle_irq,
.enable = xscale1pmu_enable_event,
}
static struct arm_pmu xscale2pmu = {
- .id = ARM_PERF_PMU_ID_XSCALE2,
.name = "xscale2",
.handle_irq = xscale2pmu_handle_irq,
.enable = xscale2pmu_enable_event,
mb();
/* Tell __cpu_die() that this CPU is now safe to dispose of */
- complete(&cpu_died);
+ RCU_NONIDLE(complete(&cpu_died));
/*
* actual CPU shutdown procedure is at least platform (if not
#include <linux/percpu.h>
#include <linux/node.h>
#include <linux/nodemask.h>
+#include <linux/of.h>
#include <linux/sched.h>
+#include <linux/slab.h>
#include <asm/cputype.h>
#include <asm/topology.h>
+/*
+ * cpu power scale management
+ */
+
+/*
+ * cpu power table
+ * This per cpu data structure describes the relative capacity of each core.
+ * On a heteregenous system, cores don't have the same computation capacity
+ * and we reflect that difference in the cpu_power field so the scheduler can
+ * take this difference into account during load balance. A per cpu structure
+ * is preferred because each CPU updates its own cpu_power field during the
+ * load balance except for idle cores. One idle core is selected to run the
+ * rebalance_domains for all idle cores and the cpu_power can be updated
+ * during this sequence.
+ */
+static DEFINE_PER_CPU(unsigned long, cpu_scale);
+
+unsigned long arch_scale_freq_power(struct sched_domain *sd, int cpu)
+{
+ return per_cpu(cpu_scale, cpu);
+}
+
+static void set_power_scale(unsigned int cpu, unsigned long power)
+{
+ per_cpu(cpu_scale, cpu) = power;
+}
+
+#ifdef CONFIG_OF
+struct cpu_efficiency {
+ const char *compatible;
+ unsigned long efficiency;
+};
+
+/*
+ * Table of relative efficiency of each processors
+ * The efficiency value must fit in 20bit and the final
+ * cpu_scale value must be in the range
+ * 0 < cpu_scale < 3*SCHED_POWER_SCALE/2
+ * in order to return at most 1 when DIV_ROUND_CLOSEST
+ * is used to compute the capacity of a CPU.
+ * Processors that are not defined in the table,
+ * use the default SCHED_POWER_SCALE value for cpu_scale.
+ */
+struct cpu_efficiency table_efficiency[] = {
+ {"arm,cortex-a15", 3891},
+ {"arm,cortex-a7", 2048},
+ {NULL, },
+};
+
+struct cpu_capacity {
+ unsigned long hwid;
+ unsigned long capacity;
+};
+
+struct cpu_capacity *cpu_capacity;
+
+unsigned long middle_capacity = 1;
+
+/*
+ * Iterate all CPUs' descriptor in DT and compute the efficiency
+ * (as per table_efficiency). Also calculate a middle efficiency
+ * as close as possible to (max{eff_i} - min{eff_i}) / 2
+ * This is later used to scale the cpu_power field such that an
+ * 'average' CPU is of middle power. Also see the comments near
+ * table_efficiency[] and update_cpu_power().
+ */
+static void __init parse_dt_topology(void)
+{
+ struct cpu_efficiency *cpu_eff;
+ struct device_node *cn = NULL;
+ unsigned long min_capacity = (unsigned long)(-1);
+ unsigned long max_capacity = 0;
+ unsigned long capacity = 0;
+ int alloc_size, cpu = 0;
+
+ alloc_size = nr_cpu_ids * sizeof(struct cpu_capacity);
+ cpu_capacity = (struct cpu_capacity *)kzalloc(alloc_size, GFP_NOWAIT);
+
+ while ((cn = of_find_node_by_type(cn, "cpu"))) {
+ const u32 *rate, *reg;
+ int len;
+
+ if (cpu >= num_possible_cpus())
+ break;
+
+ for (cpu_eff = table_efficiency; cpu_eff->compatible; cpu_eff++)
+ if (of_device_is_compatible(cn, cpu_eff->compatible))
+ break;
+
+ if (cpu_eff->compatible == NULL)
+ continue;
+
+ rate = of_get_property(cn, "clock-frequency", &len);
+ if (!rate || len != 4) {
+ pr_err("%s missing clock-frequency property\n",
+ cn->full_name);
+ continue;
+ }
+
+ reg = of_get_property(cn, "reg", &len);
+ if (!reg || len != 4) {
+ pr_err("%s missing reg property\n", cn->full_name);
+ continue;
+ }
+
+ capacity = ((be32_to_cpup(rate)) >> 20) * cpu_eff->efficiency;
+
+ /* Save min capacity of the system */
+ if (capacity < min_capacity)
+ min_capacity = capacity;
+
+ /* Save max capacity of the system */
+ if (capacity > max_capacity)
+ max_capacity = capacity;
+
+ cpu_capacity[cpu].capacity = capacity;
+ cpu_capacity[cpu++].hwid = be32_to_cpup(reg);
+ }
+
+ if (cpu < num_possible_cpus())
+ cpu_capacity[cpu].hwid = (unsigned long)(-1);
+
+ /* If min and max capacities are equals, we bypass the update of the
+ * cpu_scale because all CPUs have the same capacity. Otherwise, we
+ * compute a middle_capacity factor that will ensure that the capacity
+ * of an 'average' CPU of the system will be as close as possible to
+ * SCHED_POWER_SCALE, which is the default value, but with the
+ * constraint explained near table_efficiency[].
+ */
+ if (min_capacity == max_capacity)
+ cpu_capacity[0].hwid = (unsigned long)(-1);
+ else if (4*max_capacity < (3*(max_capacity + min_capacity)))
+ middle_capacity = (min_capacity + max_capacity)
+ >> (SCHED_POWER_SHIFT+1);
+ else
+ middle_capacity = ((max_capacity / 3)
+ >> (SCHED_POWER_SHIFT-1)) + 1;
+
+}
+
+/*
+ * Look for a customed capacity of a CPU in the cpu_capacity table during the
+ * boot. The update of all CPUs is in O(n^2) for heteregeneous system but the
+ * function returns directly for SMP system.
+ */
+void update_cpu_power(unsigned int cpu, unsigned long hwid)
+{
+ unsigned int idx = 0;
+
+ /* look for the cpu's hwid in the cpu capacity table */
+ for (idx = 0; idx < num_possible_cpus(); idx++) {
+ if (cpu_capacity[idx].hwid == hwid)
+ break;
+
+ if (cpu_capacity[idx].hwid == -1)
+ return;
+ }
+
+ if (idx == num_possible_cpus())
+ return;
+
+ set_power_scale(cpu, cpu_capacity[idx].capacity / middle_capacity);
+
+ printk(KERN_INFO "CPU%u: update cpu_power %lu\n",
+ cpu, arch_scale_freq_power(NULL, cpu));
+}
+
+#else
+static inline void parse_dt_topology(void) {}
+static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
+#endif
+
+
+/*
+ * cpu topology management
+ */
+
#define MPIDR_SMP_BITMASK (0x3 << 30)
#define MPIDR_SMP_VALUE (0x2 << 30)
* These masks reflect the current use of the affinity levels.
* The affinity level can be up to 16 bits according to ARM ARM
*/
+#define MPIDR_HWID_BITMASK 0xFFFFFF
#define MPIDR_LEVEL0_MASK 0x3
#define MPIDR_LEVEL0_SHIFT 0
#define MPIDR_LEVEL2_MASK 0xFF
#define MPIDR_LEVEL2_SHIFT 16
+/*
+ * cpu topology table
+ */
struct cputopo_arm cpu_topology[NR_CPUS];
const struct cpumask *cpu_coregroup_mask(int cpu)
return &cpu_topology[cpu].core_sibling;
}
+void update_siblings_masks(unsigned int cpuid)
+{
+ struct cputopo_arm *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
+ int cpu;
+
+ /* update core and thread sibling masks */
+ for_each_possible_cpu(cpu) {
+ cpu_topo = &cpu_topology[cpu];
+
+ if (cpuid_topo->socket_id != cpu_topo->socket_id)
+ continue;
+
+ cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
+
+ if (cpuid_topo->core_id != cpu_topo->core_id)
+ continue;
+
+ cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling);
+ }
+ smp_wmb();
+}
+
/*
* store_cpu_topology is called at boot when only one cpu is running
* and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
{
struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid];
unsigned int mpidr;
- unsigned int cpu;
/* If the cpu topology has been already set, just return */
if (cpuid_topo->core_id != -1)
cpuid_topo->socket_id = -1;
}
- /* update core and thread sibling masks */
- for_each_possible_cpu(cpu) {
- struct cputopo_arm *cpu_topo = &cpu_topology[cpu];
-
- if (cpuid_topo->socket_id == cpu_topo->socket_id) {
- cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
- if (cpu != cpuid)
- cpumask_set_cpu(cpu,
- &cpuid_topo->core_sibling);
-
- if (cpuid_topo->core_id == cpu_topo->core_id) {
- cpumask_set_cpu(cpuid,
- &cpu_topo->thread_sibling);
- if (cpu != cpuid)
- cpumask_set_cpu(cpu,
- &cpuid_topo->thread_sibling);
- }
- }
- }
- smp_wmb();
+ update_siblings_masks(cpuid);
+
+ update_cpu_power(cpuid, mpidr & MPIDR_HWID_BITMASK);
printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
cpuid, cpu_topology[cpuid].thread_id,
{
unsigned int cpu;
- /* init core mask */
+ /* init core mask and power*/
for_each_possible_cpu(cpu) {
struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
cpu_topo->socket_id = -1;
cpumask_clear(&cpu_topo->core_sibling);
cpumask_clear(&cpu_topo->thread_sibling);
+
+ set_power_scale(cpu, SCHED_POWER_SCALE);
}
smp_wmb();
+
+ parse_dt_topology();
}
#define S_ISA " ARM"
#endif
-static int __die(const char *str, int err, struct thread_info *thread, struct pt_regs *regs)
+static int __die(const char *str, int err, struct pt_regs *regs)
{
- struct task_struct *tsk = thread->task;
+ struct task_struct *tsk = current;
static int die_counter;
int ret;
/* trap and error numbers are mostly meaningless on ARM */
ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, SIGSEGV);
if (ret == NOTIFY_STOP)
- return ret;
+ return 1;
print_modules();
__show_regs(regs);
printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
- TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
+ TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), end_of_stack(tsk));
if (!user_mode(regs) || in_interrupt()) {
dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
dump_instr(KERN_EMERG, regs);
}
- return ret;
+ return 0;
}
-static DEFINE_RAW_SPINLOCK(die_lock);
+static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
-/*
- * This function is protected against re-entrancy.
- */
-void die(const char *str, struct pt_regs *regs, int err)
+static unsigned long oops_begin(void)
{
- struct thread_info *thread = current_thread_info();
- int ret;
- enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
+ int cpu;
+ unsigned long flags;
oops_enter();
- raw_spin_lock_irq(&die_lock);
+ /* racy, but better than risking deadlock. */
+ raw_local_irq_save(flags);
+ cpu = smp_processor_id();
+ if (!arch_spin_trylock(&die_lock)) {
+ if (cpu == die_owner)
+ /* nested oops. should stop eventually */;
+ else
+ arch_spin_lock(&die_lock);
+ }
+ die_nest_count++;
+ die_owner = cpu;
console_verbose();
bust_spinlocks(1);
- if (!user_mode(regs))
- bug_type = report_bug(regs->ARM_pc, regs);
- if (bug_type != BUG_TRAP_TYPE_NONE)
- str = "Oops - BUG";
- ret = __die(str, err, thread, regs);
+ return flags;
+}
- if (regs && kexec_should_crash(thread->task))
+static void oops_end(unsigned long flags, struct pt_regs *regs, int signr)
+{
+ if (regs && kexec_should_crash(current))
crash_kexec(regs);
bust_spinlocks(0);
+ die_owner = -1;
add_taint(TAINT_DIE);
- raw_spin_unlock_irq(&die_lock);
+ die_nest_count--;
+ if (!die_nest_count)
+ /* Nest count reaches zero, release the lock. */
+ arch_spin_unlock(&die_lock);
+ raw_local_irq_restore(flags);
oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
- if (ret != NOTIFY_STOP)
- do_exit(SIGSEGV);
+ if (signr)
+ do_exit(signr);
+}
+
+/*
+ * This function is protected against re-entrancy.
+ */
+void die(const char *str, struct pt_regs *regs, int err)
+{
+ enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
+ unsigned long flags = oops_begin();
+ int sig = SIGSEGV;
+
+ if (!user_mode(regs))
+ bug_type = report_bug(regs->ARM_pc, regs);
+ if (bug_type != BUG_TRAP_TYPE_NONE)
+ str = "Oops - BUG";
+
+ if (__die(str, err, regs))
+ sig = 0;
+
+ oops_end(flags, regs, sig);
}
void arm_notify_die(const char *str, struct pt_regs *regs,
lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
- delay.o findbit.o memchr.o memcpy.o \
+ delay.o delay-loop.o findbit.o memchr.o memcpy.o \
memmove.o memset.o memzero.o setbit.o \
- strncpy_from_user.o strnlen_user.o \
strchr.o strrchr.o \
testchangebit.o testclearbit.o testsetbit.o \
ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
-#include <asm/param.h>
+#include <asm/delay.h>
.text
.LC0: .word loops_per_jiffy
-.LC1: .word (2199023*HZ)>>11
+.LC1: .word UDELAY_MULT
/*
* r0 <= 2000
* HZ <= 1000
*/
-ENTRY(__udelay)
+ENTRY(__loop_udelay)
ldr r2, .LC1
mul r0, r2, r0
-ENTRY(__const_udelay) @ 0 <= r0 <= 0x7fffff06
+ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06
mov r1, #-1
ldr r2, .LC0
ldr r2, [r2] @ max = 0x01ffffff
/*
* loops = r0 * HZ * loops_per_jiffy / 1000000
- *
- * Oh, if only we had a cycle counter...
*/
@ Delay routine
-ENTRY(__delay)
+ENTRY(__loop_delay)
subs r0, r0, #1
#if 0
movls pc, lr
movls pc, lr
subs r0, r0, #1
#endif
- bhi __delay
+ bhi __loop_delay
mov pc, lr
-ENDPROC(__udelay)
-ENDPROC(__const_udelay)
-ENDPROC(__delay)
+ENDPROC(__loop_udelay)
+ENDPROC(__loop_const_udelay)
+ENDPROC(__loop_delay)
--- /dev/null
+/*
+ * Delay loops based on the OpenRISC implementation.
+ *
+ * Copyright (C) 2012 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/timex.h>
+
+/*
+ * Default to the loop-based delay implementation.
+ */
+struct arm_delay_ops arm_delay_ops = {
+ .delay = __loop_delay,
+ .const_udelay = __loop_const_udelay,
+ .udelay = __loop_udelay,
+};
+
+#ifdef ARCH_HAS_READ_CURRENT_TIMER
+static void __timer_delay(unsigned long cycles)
+{
+ cycles_t start = get_cycles();
+
+ while ((get_cycles() - start) < cycles)
+ cpu_relax();
+}
+
+static void __timer_const_udelay(unsigned long xloops)
+{
+ unsigned long long loops = xloops;
+ loops *= loops_per_jiffy;
+ __timer_delay(loops >> UDELAY_SHIFT);
+}
+
+static void __timer_udelay(unsigned long usecs)
+{
+ __timer_const_udelay(usecs * UDELAY_MULT);
+}
+
+void __init init_current_timer_delay(unsigned long freq)
+{
+ pr_info("Switching to timer-based delay loop\n");
+ lpj_fine = freq / HZ;
+ arm_delay_ops.delay = __timer_delay;
+ arm_delay_ops.const_udelay = __timer_const_udelay;
+ arm_delay_ops.udelay = __timer_udelay;
+}
+
+unsigned long __cpuinit calibrate_delay_is_known(void)
+{
+ return lpj_fine;
+}
+#endif
+++ /dev/null
-/*
- * linux/arch/arm/lib/strncpy_from_user.S
- *
- * Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
- .text
- .align 5
-
-/*
- * Copy a string from user space to kernel space.
- * r0 = dst, r1 = src, r2 = byte length
- * returns the number of characters copied (strlen of copied string),
- * -EFAULT on exception, or "len" if we fill the whole buffer
- */
-ENTRY(__strncpy_from_user)
- mov ip, r1
-1: subs r2, r2, #1
- ldrusr r3, r1, 1, pl
- bmi 2f
- strb r3, [r0], #1
- teq r3, #0
- bne 1b
- sub r1, r1, #1 @ take NUL character out of count
-2: sub r0, r1, ip
- mov pc, lr
-ENDPROC(__strncpy_from_user)
-
- .pushsection .fixup,"ax"
- .align 0
-9001: mov r3, #0
- strb r3, [r0, #0] @ null terminate
- mov r0, #-EFAULT
- mov pc, lr
- .popsection
-
+++ /dev/null
-/*
- * linux/arch/arm/lib/strnlen_user.S
- *
- * Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
- .text
- .align 5
-
-/* Prototype: unsigned long __strnlen_user(const char *str, long n)
- * Purpose : get length of a string in user memory
- * Params : str - address of string in user memory
- * Returns : length of string *including terminator*
- * or zero on exception, or n + 1 if too long
- */
-ENTRY(__strnlen_user)
- mov r2, r0
-1:
- ldrusr r3, r0, 1
- teq r3, #0
- beq 2f
- subs r1, r1, #1
- bne 1b
- add r0, r0, #1
-2: sub r0, r0, r2
- mov pc, lr
-ENDPROC(__strnlen_user)
-
- .pushsection .fixup,"ax"
- .align 0
-9001: mov r0, #0
- mov pc, lr
- .popsection
struct exynos_pm_domain *pd)
{
if (pdev->dev.bus) {
- if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+ if (!pm_genpd_add_device(&pd->pd, &pdev->dev))
+ pm_genpd_dev_need_restore(&pdev->dev, true);
+ else
pr_info("%s: error in adding %s device to %s power"
"domain\n", __func__, dev_name(&pdev->dev),
pd->name);
if (of_have_populated_dt())
return exynos_pm_dt_parse_domains();
- for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
- pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
- exynos4_pm_domains[idx]->is_off);
+ for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) {
+ struct exynos_pm_domain *pd = exynos4_pm_domains[idx];
+ int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+ pm_genpd_init(&pd->pd, NULL, !on);
+ }
#ifdef CONFIG_S5P_DEV_FIMD0
exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- gic_raise_softirq(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 0);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
*
* CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
* clockdomain. (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ * active whenever the MPU is active. True for interconnects and
+ * the WKUP clockdomains.
*/
#define CLKDM_CAN_FORCE_SLEEP (1 << 0)
#define CLKDM_CAN_FORCE_WAKEUP (1 << 1)
#define CLKDM_CAN_ENABLE_AUTO (1 << 2)
#define CLKDM_CAN_DISABLE_AUTO (1 << 3)
#define CLKDM_NO_AUTODEPS (1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU (1 << 5)
#define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
#define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)
.name = "wkup_clkdm",
.pwrdm = { .name = "wkup_pwrdm" },
.dep_bit = OMAP_EN_WKUP_SHIFT,
+ .flags = CLKDM_ACTIVE_WITH_MPU,
};
.cm_inst = OMAP4430_PRM_WKUP_CM_INST,
.clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
.dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT,
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
};
static struct clockdomain emu_sys_44xx_clkdm = {
booted = true;
}
- gic_raise_softirq(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 0);
/*
* Now the secondary core is starting up let it run its
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
* @oh: struct omap_hwmod *
*
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle. If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby. No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes. No return value.
*/
static void _enable_sysc(struct omap_hwmod *oh)
{
u8 idlemode, sf;
u32 v;
+ bool clkdm_act;
if (!oh->class->sysc)
return;
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+ clkdm_act = ((oh->clkdm &&
+ oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+ (oh->_clk && oh->_clk->clkdm &&
+ oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+ if (clkdm_act && !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+ HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
sf = oh->class->sysc->sysc_flags;
if (sf & SYSC_HAS_SIDLEMODE) {
- idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
- HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+ /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+ if (oh->flags & HWMOD_SWSUP_SIDLE ||
+ !(oh->class->sysc->idlemodes &
+ (SIDLE_SMART | SIDLE_SMART_WKUP)))
+ idlemode = HWMOD_IDLEMODE_FORCE;
+ else
+ idlemode = HWMOD_IDLEMODE_SMART;
_set_slave_idlemode(oh, idlemode, &v);
}
* OS Timer & Match Registers
*/
-#define OSMR0 __REG(0x40A00000) /* */
-#define OSMR1 __REG(0x40A00004) /* */
-#define OSMR2 __REG(0x40A00008) /* */
-#define OSMR3 __REG(0x40A0000C) /* */
-#define OSMR4 __REG(0x40A00080) /* */
-#define OSCR __REG(0x40A00010) /* OS Timer Counter Register */
-#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */
-#define OMCR4 __REG(0x40A000C0) /* */
-#define OSSR __REG(0x40A00014) /* OS Timer Status Register */
-#define OWER __REG(0x40A00018) /* OS Timer Watchdog Enable Register */
-#define OIER __REG(0x40A0001C) /* OS Timer Interrupt Enable Register */
+#define OSMR0 io_p2v(0x40A00000) /* */
+#define OSMR1 io_p2v(0x40A00004) /* */
+#define OSMR2 io_p2v(0x40A00008) /* */
+#define OSMR3 io_p2v(0x40A0000C) /* */
+#define OSMR4 io_p2v(0x40A00080) /* */
+#define OSCR io_p2v(0x40A00010) /* OS Timer Counter Register */
+#define OSCR4 io_p2v(0x40A00040) /* OS Timer Counter Register */
+#define OMCR4 io_p2v(0x40A000C0) /* */
+#define OSSR io_p2v(0x40A00014) /* OS Timer Status Register */
+#define OWER io_p2v(0x40A00018) /* OS Timer Watchdog Enable Register */
+#define OIER io_p2v(0x40A0001C) /* OS Timer Interrupt Enable Register */
#define OSSR_M3 (1 << 3) /* Match status channel 3 */
#define OSSR_M2 (1 << 2) /* Match status channel 2 */
static void do_hw_reset(void)
{
/* Initialize the watchdog and let it fire */
- OWER = OWER_WME;
- OSSR = OSSR_M3;
- OSMR3 = OSCR + 368640; /* ... in 100 ms */
+ writel_relaxed(OWER_WME, OWER);
+ writel_relaxed(OSSR_M3, OSSR);
+ /* ... in 100 ms */
+ writel_relaxed(readl_relaxed(OSCR) + 368640, OSMR3);
}
void pxa_restart(char mode, const char *cmd)
static u32 notrace pxa_read_sched_clock(void)
{
- return OSCR;
+ return readl_relaxed(OSCR);
}
struct clock_event_device *c = dev_id;
/* Disarm the compare/match, signal the event. */
- OIER &= ~OIER_E0;
- OSSR = OSSR_M0;
+ writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
+ writel_relaxed(OSSR_M0, OSSR);
c->event_handler(c);
return IRQ_HANDLED;
{
unsigned long next, oscr;
- OIER |= OIER_E0;
- next = OSCR + delta;
- OSMR0 = next;
- oscr = OSCR;
+ writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER);
+ next = readl_relaxed(OSCR) + delta;
+ writel_relaxed(next, OSMR0);
+ oscr = readl_relaxed(OSCR);
return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
}
{
switch (mode) {
case CLOCK_EVT_MODE_ONESHOT:
- OIER &= ~OIER_E0;
- OSSR = OSSR_M0;
+ writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
+ writel_relaxed(OSSR_M0, OSSR);
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
/* initializing, released, or preparing for suspend */
- OIER &= ~OIER_E0;
- OSSR = OSSR_M0;
+ writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
+ writel_relaxed(OSSR_M0, OSSR);
break;
case CLOCK_EVT_MODE_RESUME:
{
unsigned long clock_tick_rate = get_clock_tick_rate();
- OIER = 0;
- OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
+ writel_relaxed(0, OIER);
+ writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
setup_irq(IRQ_OST0, &pxa_ost0_irq);
- clocksource_mmio_init(&OSCR, "oscr0", clock_tick_rate, 200, 32,
+ clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
clocksource_mmio_readl_up);
clockevents_register_device(&ckevt_pxa_osmr0);
}
static void pxa_timer_suspend(void)
{
- osmr[0] = OSMR0;
- osmr[1] = OSMR1;
- osmr[2] = OSMR2;
- osmr[3] = OSMR3;
- oier = OIER;
- oscr = OSCR;
+ osmr[0] = readl_relaxed(OSMR0);
+ osmr[1] = readl_relaxed(OSMR1);
+ osmr[2] = readl_relaxed(OSMR2);
+ osmr[3] = readl_relaxed(OSMR3);
+ oier = readl_relaxed(OIER);
+ oscr = readl_relaxed(OSCR);
}
static void pxa_timer_resume(void)
if (osmr[0] - oscr < MIN_OSCR_DELTA)
osmr[0] += MIN_OSCR_DELTA;
- OSMR0 = osmr[0];
- OSMR1 = osmr[1];
- OSMR2 = osmr[2];
- OSMR3 = osmr[3];
- OIER = oier;
- OSCR = oscr;
+ writel_relaxed(osmr[0], OSMR0);
+ writel_relaxed(osmr[1], OSMR1);
+ writel_relaxed(osmr[2], OSMR2);
+ writel_relaxed(osmr[3], OSMR3);
+ writel_relaxed(oier, OIER);
+ writel_relaxed(oscr, OSCR);
}
#else
#define pxa_timer_suspend NULL
static struct clk s3c2440_clk_ac97 = {
.name = "ac97",
.enable = s3c2410_clkcon_enable,
- .ctrlbit = S3C2440_CLKCON_CAMERA,
+ .ctrlbit = S3C2440_CLKCON_AC97,
};
static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
static void __init map_sa1100_gpio_regs( void )
{
unsigned long phys = __PREG(GPLR) & PMD_MASK;
- unsigned long virt = io_p2v(phys);
+ unsigned long virt = (unsigned long)io_p2v(phys);
int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO);
pmd_t *pmd;
#include <linux/types.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
+#include <linux/io.h>
#include <asm/cputype.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
* (read/write).
*/
-#define OSMR0 __REG(0x90000000) /* OS timer Match Reg. 0 */
-#define OSMR1 __REG(0x90000004) /* OS timer Match Reg. 1 */
-#define OSMR2 __REG(0x90000008) /* OS timer Match Reg. 2 */
-#define OSMR3 __REG(0x9000000c) /* OS timer Match Reg. 3 */
-#define OSCR __REG(0x90000010) /* OS timer Counter Reg. */
-#define OSSR __REG(0x90000014 ) /* OS timer Status Reg. */
-#define OWER __REG(0x90000018 ) /* OS timer Watch-dog Enable Reg. */
-#define OIER __REG(0x9000001C ) /* OS timer Interrupt Enable Reg. */
+#define OSMR0 io_p2v(0x90000000) /* OS timer Match Reg. 0 */
+#define OSMR1 io_p2v(0x90000004) /* OS timer Match Reg. 1 */
+#define OSMR2 io_p2v(0x90000008) /* OS timer Match Reg. 2 */
+#define OSMR3 io_p2v(0x9000000c) /* OS timer Match Reg. 3 */
+#define OSCR io_p2v(0x90000010) /* OS timer Counter Reg. */
+#define OSSR io_p2v(0x90000014) /* OS timer Status Reg. */
+#define OWER io_p2v(0x90000018) /* OS timer Watch-dog Enable Reg. */
+#define OIER io_p2v(0x9000001C) /* OS timer Interrupt Enable Reg. */
#define OSSR_M(Nb) /* Match detected [0..3] */ \
(0x00000001 << (Nb))
#ifndef __ASM_ARCH_SA1100_GPIO_H
#define __ASM_ARCH_SA1100_GPIO_H
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm-generic/gpio.h>
#define PIO_START 0x80000000 /* physical start of IO space */
#define io_p2v( x ) \
- ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+ IOMEM( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
#define io_v2p( x ) \
( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
#define CPU_SA1110_ID (0x6901b110)
#define CPU_SA1110_MASK (0xfffffff0)
+#define __MREG(x) IOMEM(io_p2v(x))
+
#ifndef __ASSEMBLY__
#include <asm/cputype.h>
#define cpu_is_sa1100() ((read_cpuid_id() & CPU_SA1100_MASK) == CPU_SA1100_ID)
#define cpu_is_sa1110() ((read_cpuid_id() & CPU_SA1110_MASK) == CPU_SA1110_ID)
-# define __REG(x) (*((volatile unsigned long *)io_p2v(x)))
+# define __REG(x) (*((volatile unsigned long __iomem *)io_p2v(x)))
# define __PREG(x) (io_v2p((unsigned long)&(x)))
static inline unsigned long get_clock_tick_rate(void)
#include "hardware.h"
+#define IOMEM(x) (x)
+
/*
* The following code assumes the serial port has already been
* initialized by the bootloader. We search for the first enabled
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/io.h>
#include <linux/irq.h>
#include <linux/ioport.h>
#include <linux/syscore_ops.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/jornada720.h>
* Author: ???
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
* pace of the LED.
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/leds.h>
* Storage is local on the stack now.
*/
#include <linux/init.h>
+#include <linux/io.h>
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
orr r4, r4, #MDREFR_K1DB2
ldr r5, =PPCR
- @ Pre-load __udelay into the I-cache
+ @ Pre-load __loop_udelay into the I-cache
mov r0, #1
- bl __udelay
+ bl __loop_udelay
mov r0, r0
@ The following must all exist in a single cache line to
@ delay 90us and set CPU PLL to lowest speed
@ fixes resume problem on high speed SA1110
mov r0, #90
- bl __udelay
+ bl __loop_udelay
mov r1, #0
str r1, [r5]
mov r0, #90
- bl __udelay
+ bl __loop_udelay
/*
* SA1110 SDRAM controller workaround. register values:
static u32 notrace sa1100_read_sched_clock(void)
{
- return OSCR;
+ return readl_relaxed(OSCR);
}
#define MIN_OSCR_DELTA 2
struct clock_event_device *c = dev_id;
/* Disarm the compare/match, signal the event. */
- OIER &= ~OIER_E0;
- OSSR = OSSR_M0;
+ writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
+ writel_relaxed(OSSR_M0, OSSR);
c->event_handler(c);
return IRQ_HANDLED;
{
unsigned long next, oscr;
- OIER |= OIER_E0;
- next = OSCR + delta;
- OSMR0 = next;
- oscr = OSCR;
+ writel_relaxed(readl_relaxed(OIER) | OIER_E0, OIER);
+ next = readl_relaxed(OSCR) + delta;
+ writel_relaxed(next, OSMR0);
+ oscr = readl_relaxed(OSCR);
return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
}
case CLOCK_EVT_MODE_ONESHOT:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
- OIER &= ~OIER_E0;
- OSSR = OSSR_M0;
+ writel_relaxed(readl_relaxed(OIER) & ~OIER_E0, OIER);
+ writel_relaxed(OSSR_M0, OSSR);
break;
case CLOCK_EVT_MODE_RESUME:
static void __init sa1100_timer_init(void)
{
- OIER = 0;
- OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
+ writel_relaxed(0, OIER);
+ writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
setup_irq(IRQ_OST0, &sa1100_timer_irq);
- clocksource_mmio_init(&OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+ clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
clocksource_mmio_readl_up);
clockevents_register_device(&ckevt_sa1100_osmr0);
}
static void sa1100_timer_suspend(void)
{
- osmr[0] = OSMR0;
- osmr[1] = OSMR1;
- osmr[2] = OSMR2;
- osmr[3] = OSMR3;
- oier = OIER;
+ osmr[0] = readl_relaxed(OSMR0);
+ osmr[1] = readl_relaxed(OSMR1);
+ osmr[2] = readl_relaxed(OSMR2);
+ osmr[3] = readl_relaxed(OSMR3);
+ oier = readl_relaxed(OIER);
}
static void sa1100_timer_resume(void)
{
- OSSR = 0x0f;
- OSMR0 = osmr[0];
- OSMR1 = osmr[1];
- OSMR2 = osmr[2];
- OSMR3 = osmr[3];
- OIER = oier;
+ writel_relaxed(0x0f, OSSR);
+ writel_relaxed(osmr[0], OSMR0);
+ writel_relaxed(osmr[1], OSMR1);
+ writel_relaxed(osmr[2], OSMR2);
+ writel_relaxed(osmr[3], OSMR3);
+ writel_relaxed(oier, OIER);
/*
* OSMR0 is the system timer: make sure OSCR is sufficiently behind
*/
- OSCR = OSMR0 - LATCH;
+ writel_relaxed(OSMR0 - LATCH, OSCR);
}
#else
#define sa1100_timer_suspend NULL
#include <mach/common.h>
#include <mach/emev2.h>
+#ifdef CONFIG_ARCH_SH73A0
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
#define is_r8a7779() machine_is_marzen()
#ifdef CONFIG_ARCH_EMEV2
static void __init spear3xx_timer_init(void)
{
- char pclk_name[] = "pll3_48m_clk";
+ char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
spear3xx_clk_init();
static void __init spear6xx_timer_init(void)
{
- char pclk_name[] = "pll3_48m_clk";
+ char pclk_name[] = "pll3_clk";
struct clk *gpt_clk, *pclk;
spear6xx_clk_init();
&ab8500_device,
};
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
- &snowball_led_dev,
- &snowball_key_dev,
-};
-
static void __init mop500_init_machine(void)
{
struct device *parent = NULL;
#ifdef CONFIG_MACH_UX500_DT
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+ &snowball_led_dev,
+ &snowball_key_dev,
+};
+
struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+ /* Requires device name bindings. */
+ OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
{},
};
/* TODO: Once MTU has been DT:ed place code above into else. */
if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
np = of_find_matching_node(NULL, prcmu_timer_of_match);
if (!np)
+#endif
goto dt_fail;
tmp_base = of_iomap(np, 0);
#include <linux/percpu.h>
#include <asm/mmu_context.h>
+#include <asm/thread_notify.h>
#include <asm/tlbflush.h>
static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
}
#endif
+#ifdef CONFIG_PID_IN_CONTEXTIDR
+static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd,
+ void *t)
+{
+ u32 contextidr;
+ pid_t pid;
+ struct thread_info *thread = t;
+
+ if (cmd != THREAD_NOTIFY_SWITCH)
+ return NOTIFY_DONE;
+
+ pid = task_pid_nr(thread->task) << ASID_BITS;
+ asm volatile(
+ " mrc p15, 0, %0, c13, c0, 1\n"
+ " bfi %1, %0, #0, %2\n"
+ " mcr p15, 0, %1, c13, c0, 1\n"
+ : "=r" (contextidr), "+r" (pid)
+ : "I" (ASID_BITS));
+ isb();
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block contextidr_notifier_block = {
+ .notifier_call = contextidr_notifier,
+};
+
+static int __init contextidr_notifier_init(void)
+{
+ return thread_register_notifier(&contextidr_notifier_block);
+}
+arch_initcall(contextidr_notifier_init);
+#endif
+
/*
* We fork()ed a process, and we need a new context for the child
* to run in.
#include <linux/slab.h>
#include <linux/iommu.h>
#include <linux/vmalloc.h>
+#include <linux/sizes.h>
#include <asm/memory.h>
#include <asm/highmem.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
-#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/dma-iommu.h>
#include <asm/mach/map.h>
while (--i)
if (pages[i])
__free_pages(pages[i], 0);
- if (array_size < PAGE_SIZE)
+ if (array_size <= PAGE_SIZE)
kfree(pages);
else
vfree(pages);
for (i = 0; i < count; i++)
if (pages[i])
__free_pages(pages[i], 0);
- if (array_size < PAGE_SIZE)
+ if (array_size <= PAGE_SIZE)
kfree(pages);
else
vfree(pages);
#include <linux/gfp.h>
#include <linux/memblock.h>
#include <linux/dma-contiguous.h>
+#include <linux/sizes.h>
#include <asm/mach-types.h>
#include <asm/memblock.h>
#include <asm/prom.h>
#include <asm/sections.h>
#include <asm/setup.h>
-#include <asm/sizes.h>
#include <asm/tlb.h>
#include <asm/fixmap.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/io.h>
+#include <linux/sizes.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
-#include <asm/sizes.h>
#include <asm/system_info.h>
#include <asm/mach/map.h>
#include <linux/memblock.h>
#include <linux/fs.h>
#include <linux/vmalloc.h>
+#include <linux/sizes.h>
#include <asm/cp15.h>
#include <asm/cputype.h>
#include <asm/sections.h>
#include <asm/cachetype.h>
#include <asm/setup.h>
-#include <asm/sizes.h>
#include <asm/smp_plat.h>
#include <asm/tlb.h>
#include <asm/highmem.h>
vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
/*
- * Only use write-through for non-SMP systems
- */
- if (!is_smp() && cpu_arch >= CPU_ARCH_ARMv5 && cachepolicy > CPOLICY_WRITETHROUGH)
- vecs_pgprot = cache_policies[CPOLICY_WRITETHROUGH].pte;
-
- /*
* Enable CPU-specific coherency if supported.
* (Only available on XSC3 at the moment.)
*/
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ drain write buffer
mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
+#ifdef CONFIG_PID_IN_CONTEXTIDR
+ mrc p15, 0, r2, c13, c0, 1 @ read current context ID
+ bic r2, r2, #0xff @ extract the PID
+ and r1, r1, #0xff
+ orr r1, r1, r2 @ insert into new context ID
+#endif
mcr p15, 0, r1, c13, c0, 1 @ set context ID
#endif
mov pc, lr
#ifdef CONFIG_ARM_ERRATA_430973
mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
#endif
+#ifdef CONFIG_PID_IN_CONTEXTIDR
+ mrc p15, 0, r2, c13, c0, 1 @ read current context ID
+ lsr r2, r2, #8 @ extract the PID
+ bfi r1, r2, #8, #24 @ insert into new context ID
+#endif
#ifdef CONFIG_ARM_ERRATA_754322
dsb
#endif
#include <asm/ptrace.h>
#ifdef CONFIG_HW_PERF_EVENTS
+
+/*
+ * OProfile has a curious naming scheme for the ARM PMUs, but they are
+ * part of the user ABI so we need to map from the perf PMU name for
+ * supported PMUs.
+ */
+static struct op_perf_name {
+ char *perf_name;
+ char *op_name;
+} op_perf_name_map[] = {
+ { "xscale1", "arm/xscale1" },
+ { "xscale1", "arm/xscale2" },
+ { "v6", "arm/armv6" },
+ { "v6mpcore", "arm/mpcore" },
+ { "ARMv7 Cortex-A8", "arm/armv7" },
+ { "ARMv7 Cortex-A9", "arm/armv7-ca9" },
+};
+
char *op_name_from_perf_id(void)
{
- enum arm_perf_pmu_ids id = armpmu_get_pmu_id();
-
- switch (id) {
- case ARM_PERF_PMU_ID_XSCALE1:
- return "arm/xscale1";
- case ARM_PERF_PMU_ID_XSCALE2:
- return "arm/xscale2";
- case ARM_PERF_PMU_ID_V6:
- return "arm/armv6";
- case ARM_PERF_PMU_ID_V6MP:
- return "arm/mpcore";
- case ARM_PERF_PMU_ID_CA8:
- return "arm/armv7";
- case ARM_PERF_PMU_ID_CA9:
- return "arm/armv7-ca9";
- default:
- return NULL;
+ int i;
+ struct op_perf_name names;
+ const char *perf_name = perf_pmu_name();
+
+ for (i = 0; i < ARRAY_SIZE(op_perf_name_map); ++i) {
+ names = op_perf_name_map[i];
+ if (!strcmp(names.perf_name, perf_name))
+ return names.op_name;
}
+
+ return NULL;
}
#endif
return -EINVAL;
}
- if (client->is_ts && adc->ts_pend)
- return -EAGAIN;
-
spin_lock_irqsave(&adc->lock, flags);
+ if (client->is_ts && adc->ts_pend) {
+ spin_unlock_irqrestore(&adc->lock, flags);
+ return -EAGAIN;
+ }
+
client->channel = channel;
client->nr_samples = nr_samples;
#ifdef CONFIG_CPU_S3C2440
static struct resource s3c_camif_resource[] = {
[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
- [1] = DEFINE_RES_IRQ(IRQ_CAM),
+ [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
+ [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
};
struct platform_device s3c_device_camif = {
struct clk clk_xusbxti = {
.name = "xusbxti",
.id = -1,
+ .rate = 24000000,
};
struct clk s5p_clk_27m = {
* the boot monitor to read the system wide flags register,
* and branch to the address found there.
*/
- gic_raise_softirq(cpumask_of(cpu), 1);
+ gic_raise_softirq(cpumask_of(cpu), 0);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
#define VMALLOC_END 0xffffffff
#define arch_enter_lazy_cpu_mode() do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
#endif /* _H8300_PGTABLE_H */
break; \
default: \
__gu_err = __get_user_bad(); \
- __gu_val = 0; \
break; \
} \
(x) = __gu_val; \
return 0;
}
+#define __clear_user clear_user
+
#endif /* _H8300_UACCESS_H */
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
-statis void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
{
siginfo_t info;
int signr;
#include <linux/profile.h>
#include <asm/io.h>
+#include <asm/irq_regs.h>
#include <asm/timer.h>
#define TICK_SIZE (tick_nsec / 1000)
OBJCOPYFLAGS += -R .empty_zero_page
-suffix_$(CONFIG_KERNEL_GZIP) = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
+suffix-$(CONFIG_KERNEL_GZIP) = gz
+suffix-$(CONFIG_KERNEL_BZIP2) = bz2
+suffix-$(CONFIG_KERNEL_LZMA) = lzma
$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
$(call if_changed,ld)
static unsigned long free_mem_end_ptr;
#ifdef CONFIG_KERNEL_BZIP2
-static void *memset(void *s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
{
char *ss = s;
#endif
#ifdef CONFIG_KERNEL_GZIP
+void *memcpy(void *dest, const void *src, size_t n)
+{
+ char *d = dest;
+ const char *s = src;
+ while (n--)
+ *d++ = *s++;
+
+ return dest;
+}
+
#define BOOT_HEAP_SIZE 0x10000
#include "../../../../lib/decompress_inflate.c"
#endif
#define PTRACE_OLDSETOPTIONS 21
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
#ifdef __KERNEL__
#include <asm/m32r.h> /* M32R_PSW_BSM, M32R_PSW_BPM */
if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
!= sizeof(insn))
- return -EIO;
+ return;
compute_next_pc(insn, pc, &next_pc, child);
if (next_pc & 0x80000000)
- return -EIO;
+ return;
if (embed_debug_trap(child, next_pc))
- return -EIO;
+ return;
invalidate_cache();
- return 0;
}
void user_disable_single_step(struct task_struct *child)
case -ERESTARTNOINTR:
regs->r0 = regs->orig_r0;
if (prev_insn(regs) < 0)
- return -EFAULT;
+ return;
}
}
select SYS_HAS_CPU_MIPS32_R1
select SYS_HAS_CPU_MIPS32_R2
select SYS_HAS_CPU_MIPS64_R1
+ select SYS_HAS_CPU_MIPS64_R2
select SYS_HAS_CPU_NEVADA
select SYS_HAS_CPU_RM7000
select SYS_HAS_EARLY_PRINTK
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
depends on SYS_HAS_CPU_CAVIUM_OCTEON
+ select ARCH_SPARSEMEM_ENABLE
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_SMP
select BCMA
select BCMA_HOST_SOC
select BCMA_DRIVER_MIPS
+ select BCMA_HOST_PCI if PCI
select BCMA_DRIVER_PCI_HOSTMODE if PCI
default y
help
return ret;
}
-static const __initdata struct {
+static const struct {
unsigned int cs;
unsigned int base;
unsigned int size;
-} pcmcia_cs[3] = {
+} pcmcia_cs[3] __initconst = {
{
.cs = MPI_CS_PCMCIA_COMMON,
.base = BCM_PCMCIA_COMMON_BASE_PA,
help
Lock the kernel's implementation of memcpy() into L2.
-config ARCH_SPARSEMEM_ENABLE
- def_bool y
- select SPARSEMEM_STATIC
-
config IOMMU_HELPER
bool
octeon_init_cvmcount();
octeon_irq_setup_secondary();
- raw_local_irq_enable();
}
/**
/* to generate the first CPU timer interrupt */
write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+ local_irq_enable();
}
/**
#include <linux/irqflags.h>
#include <linux/types.h>
#include <asm/barrier.h>
-#include <asm/bug.h>
#include <asm/byteorder.h> /* sigh ... */
#include <asm/cpu-features.h>
#include <asm/sgidefs.h>
#ifndef __ASM_CMPXCHG_H
#define __ASM_CMPXCHG_H
+#include <linux/bug.h>
#include <linux/irqflags.h>
#include <asm/war.h>
#define PRID_IMP_24KE 0x9600
#define PRID_IMP_74K 0x9700
#define PRID_IMP_1004K 0x9900
+#define PRID_IMP_M14KC 0x9c00
/*
* These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
*/
CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
- CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
+ CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC,
/*
* MIPS64 class processors
*/
- CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+ CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
CPU_XLR, CPU_XLP,
#define MIPS_CPU_ISA_M64R2 0x00000100
#define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
- MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+ MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2)
#define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100
#define GIC_VPE_EIC_SS(intr) \
- (GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+ (GIC_VPE_EIC_SHADOW_SET_BASE + (4 * intr))
#define GIC_VPE_EIC_VEC_BASE 0x0800
#define GIC_VPE_EIC_VEC(intr) \
#define GIC_FLAG_TRANSPARENT 0x02
};
+/*
+ * This is only used in EIC mode. This helps to figure out which
+ * shared interrupts we need to process when we get a vector interrupt.
+ */
+#define GIC_MAX_SHARED_INTR 0x5
+struct gic_shared_intr_map {
+ unsigned int num_shared_intr;
+ unsigned int intr_list[GIC_MAX_SHARED_INTR];
+ unsigned int local_intr_mask;
+};
+
extern void gic_init(unsigned long gic_base_addr,
unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
unsigned int intrmap_size, unsigned int irqbase);
extern void gic_send_ipi(unsigned int intr);
extern unsigned int plat_ipi_call_int_xlate(unsigned int);
extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
+extern void gic_bind_eic_interrupt(int irq, int set);
+extern unsigned int gic_get_timer_pending(void);
#endif /* _ASM_GICREGS_H */
unsigned int func : 6;
};
-struct ma_format { /* FPU multipy and add format (MIPS IV) */
+struct ma_format { /* FPU multiply and add format (MIPS IV) */
unsigned int opcode : 6;
unsigned int fr : 5;
unsigned int ft : 5;
unsigned int opcode : 6;
};
-struct ma_format { /* FPU multipy and add format (MIPS IV) */
+struct ma_format { /* FPU multiply and add format (MIPS IV) */
unsigned int fmt : 2;
unsigned int func : 4;
unsigned int fd : 5;
#include <linux/types.h>
#include <asm/addrspace.h>
+#include <asm/bug.h>
#include <asm/byteorder.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
* IE7. Since R2 their number has to be read from the c0_intctl register.
*/
#define CP0_LEGACY_COMPARE_IRQ 7
+#define CP0_LEGACY_PERFCNT_IRQ 7
extern int cp0_compare_irq;
extern int cp0_compare_irq_shift;
#define CKCTL_6368_USBH_CLK_EN (1 << 15)
#define CKCTL_6368_DISABLE_GLESS_EN (1 << 16)
#define CKCTL_6368_NAND_CLK_EN (1 << 17)
-#define CKCTL_6368_IPSEC_CLK_EN (1 << 17)
+#define CKCTL_6368_IPSEC_CLK_EN (1 << 18)
#define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \
CKCTL_6368_SWPKT_SAR_EN | \
#define GIC_CPU_INT4 4 /* . */
#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
+/* MALTA GIC local interrupts */
+#define GIC_INT_TMR (GIC_CPU_INT5)
+#define GIC_INT_PERFCTR (GIC_CPU_INT5)
+
+/* GIC constants */
+/* Add 2 to convert non-eic hw int # to eic vector # */
+#define GIC_CPU_TO_VEC_OFFSET (2)
+/* If we map an intr to pin X, GIC will actually generate vector X+1 */
+#define GIC_PIN_TO_VEC_OFFSET (1)
+
#define GIC_EXT_INTR(x) x
/* External Interrupts used for IPI */
#define CP0_VPECONF0 $1, 2
#define CP0_VPECONF1 $1, 3
#define CP0_YQMASK $1, 4
-#define CP0_VPESCHEDULE $1, 5
+#define CP0_VPESCHEDULE $1, 5
#define CP0_VPESCHEFBK $1, 6
#define CP0_TCSTATUS $2, 1
#define CP0_TCBIND $2, 2
* switch_to(n) should switch tasks to task nr n, first
* checking that n isn't the current task, in which case it does nothing.
*/
-extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu);
extern unsigned int ll_bit;
extern struct task_struct *ll_task;
#define switch_to(prev, next, last) \
do { \
+ u32 __usedfpu; \
__mips_mt_fpaff_switch_to(prev); \
if (cpu_has_dsp) \
__save_dsp(prev); \
__clear_software_ll_bit(); \
- (last) = resume(prev, next, task_thread_info(next)); \
+ __usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU); \
+ (last) = resume(prev, next, task_thread_info(next), __usedfpu); \
} while (0)
#define finish_arch_switch(prev) \
register struct thread_info *__current_thread_info __asm__("$28");
#define current_thread_info() __current_thread_info
+#endif /* !__ASSEMBLY__ */
+
/* thread information allocation */
#if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
#define THREAD_SIZE_ORDER (1)
#define STACK_WARN (THREAD_SIZE / 8)
-#endif /* !__ASSEMBLY__ */
-
#define PREEMPT_ACTIVE 0x10000000
/*
* Copyright (C) xxxx the Anonymous
* Copyright (C) 1994 - 2006 Ralf Baechle
* Copyright (C) 2003, 2004 Maciej W. Rozycki
- * Copyright (C) 2001, 2004 MIPS Inc.
+ * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
cpu_wait = rm7k_wait_irqoff;
break;
+ case CPU_M14KC:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
c->cputype = CPU_5KC;
__cpu_name[cpu] = "MIPS 5Kc";
break;
+ case PRID_IMP_5KE:
+ c->cputype = CPU_5KE;
+ __cpu_name[cpu] = "MIPS 5KE";
+ break;
case PRID_IMP_20KC:
c->cputype = CPU_20KC;
__cpu_name[cpu] = "MIPS 20Kc";
c->cputype = CPU_74K;
__cpu_name[cpu] = "MIPS 74Kc";
break;
+ case PRID_IMP_M14KC:
+ c->cputype = CPU_M14KC;
+ __cpu_name[cpu] = "MIPS M14Kc";
+ break;
case PRID_IMP_1004K:
c->cputype = CPU_1004K;
__cpu_name[cpu] = "MIPS 1004Kc";
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05 by Ralf Baechle
+ * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle
* Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
*/
#include <linux/interrupt.h>
EXPORT_SYMBOL(kernel_thread);
/*
+ * Functions that operate on entire pages. Mostly used by memory management.
+ */
+EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
+
+/*
* Userspace access stuff.
*/
EXPORT_SYMBOL(__copy_user);
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti)
+ * struct thread_info *next_ti, int usedfpu)
*/
.align 7
LEAF(resume)
return counters >> vpe_shift();
}
-static unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
- return counters << vpe_shift();
-}
-
#else /* !CONFIG_MIPS_MT_SMP */
#define vpe_id() 0
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti) )
+ * struct thread_info *next_ti, int usedfpu)
*/
LEAF(resume)
mfc0 t1, CP0_STATUS
cpu_save_nonscratch a0
sw ra, THREAD_REG31(a0)
- /*
- * check if we need to save FPU registers
- */
- lw t3, TASK_THREAD_INFO(a0)
- lw t0, TI_FLAGS(t3)
- li t1, _TIF_USEDFPU
- and t2, t0, t1
- beqz t2, 1f
- nor t1, zero, t1
+ beqz a3, 1f
- and t0, t0, t1
- sw t0, TI_FLAGS(t3)
+ PTR_L t3, TASK_THREAD_INFO(a0)
/*
* clear saved user stack CU1 bit
/*
* task_struct *resume(task_struct *prev, task_struct *next,
- * struct thread_info *next_ti)
+ * struct thread_info *next_ti, int usedfpu)
*/
.align 5
LEAF(resume)
/*
* check if we need to save FPU registers
*/
- PTR_L t3, TASK_THREAD_INFO(a0)
- LONG_L t0, TI_FLAGS(t3)
- li t1, _TIF_USEDFPU
- and t2, t0, t1
- beqz t2, 1f
- nor t1, zero, t1
- and t0, t0, t1
- LONG_S t0, TI_FLAGS(t3)
+ beqz a3, 1f
+ PTR_L t3, TASK_THREAD_INFO(a0)
/*
* clear saved user stack CU1 bit
*/
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
-#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/cpumask.h>
#include <linux/reboot.h>
write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
#endif
-
- /* make sure there won't be a timer interrupt for a little while */
- write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
-
- irq_enable_hazard();
- set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
- irq_enable_hazard();
}
/*
static void bmips_smp_finish(void)
{
pr_info("SMP: CPU%d is running\n", smp_processor_id());
+
+ /* make sure there won't be a timer interrupt for a little while */
+ write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+
+ irq_enable_hazard();
+ set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
+ irq_enable_hazard();
}
/*
notify_cpu_starting(cpu);
- mp_ops->smp_finish();
+ set_cpu_online(cpu, true);
+
set_cpu_sibling_map(cpu);
cpu_set(cpu, cpu_callin_map);
synchronise_count_slave();
+ /*
+ * irq will be enabled in ->smp_finish(), enabling it too early
+ * is dangerous.
+ */
+ WARN_ON_ONCE(!irqs_disabled());
+ mp_ops->smp_finish();
+
cpu_idle();
}
while (!cpu_isset(cpu, cpu_callin_map))
udelay(100);
- set_cpu_online(cpu, true);
-
return 0;
}
/*
* Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
+ * Make sure all CPUs are in a sensible state before we boot any of the
* secondaries.
*
* For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
/*
* TCContext gets an offset from the base of the IPIQ array
* to be used in low-level code to detect the presence of
- * an active IPI queue
+ * an active IPI queue.
*/
write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
/* Bind tc to vpe */
write_tc_c0_tcbind(vpe);
- /* In general, all TCs should have the same cpu_data indications */
+ /* In general, all TCs should have the same cpu_data indications. */
memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
/* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
if (cpu_data[0].cputype == CPU_34K ||
}
/*
- * Tweak to get Count registes in as close a sync as possible.
- * Value seems good for 34K-class cores.
+ * Tweak to get Count registes in as close a sync as possible. The
+ * value seems good for 34K-class cores.
*/
#define CP0_SKEW 8
void smtc_init_secondary(void)
{
- local_irq_enable();
}
void smtc_smp_finish(void)
if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+ local_irq_enable();
+
printk("TC %d going on-line as CPU %d\n",
cpu_data[smp_processor_id()].tc_id, smp_processor_id());
}
void __cpuinit synchronise_count_slave(void)
{
int i;
- unsigned long flags;
unsigned int initcount;
int ncpus;
return;
#endif
- local_irq_save(flags);
-
/*
* Not every cpu is online at the time this gets called,
* so we first wait for the master to say everyone is ready
}
/* Arrange for an interrupt in a short while */
write_c0_compare(read_c0_count() + COUNTON);
-
- local_irq_restore(flags);
}
#undef NR_LOOPS
unsigned long ra = regs->regs[31];
unsigned long pc = regs->cp0_epc;
+ if (!task)
+ task = current;
+
if (raw_show_trace || !__kernel_text_address(pc)) {
show_raw_backtrace(sp);
return;
break;
case CPU_5KC:
+ case CPU_5KE:
write_c0_ecc(0x80000000);
back_to_back_c0_hazard();
/* Set the PE bit (bit 31) in the c0_errctl register. */
* Timer interrupt
*/
int cp0_compare_irq;
+EXPORT_SYMBOL_GPL(cp0_compare_irq);
int cp0_compare_irq_shift;
/*
cp0_perfcount_irq = -1;
} else {
cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
- cp0_compare_irq_shift = cp0_compare_irq;
+ cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ;
cp0_perfcount_irq = -1;
}
#include <asm/asm-offsets.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
#include <asm-generic/vmlinux.lds.h>
#undef mips
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
- INIT_TASK_DATA(PAGE_SIZE)
+ INIT_TASK_DATA(THREAD_SIZE)
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
#
obj-y += cache.o dma-default.o extable.o fault.o \
- gup.o init.o mmap.o page.o tlbex.o \
- tlbex-fault.o uasm.o
+ gup.o init.o mmap.o page.o page-funcs.o \
+ tlbex.o tlbex-fault.o uasm.o
obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o
obj-$(CONFIG_64BIT) += pgtable-64.o
c->icache.linesz = 2 << lsize;
else
c->icache.linesz = lsize;
- c->icache.sets = 64 << ((config1 >> 22) & 7);
+ c->icache.sets = 32 << (((config1 >> 22) + 1) & 7);
c->icache.ways = 1 + ((config1 >> 16) & 7);
icache_size = c->icache.sets *
c->dcache.linesz = 2 << lsize;
else
c->dcache.linesz= lsize;
- c->dcache.sets = 64 << ((config1 >> 13) & 7);
+ c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7);
c->dcache.ways = 1 + ((config1 >> 7) & 7);
dcache_size = c->dcache.sets *
case CPU_R14000:
break;
+ case CPU_M14KC:
case CPU_24K:
case CPU_34K:
case CPU_74K:
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Micro-assembler generated clear_page/copy_page functions.
+ *
+ * Copyright (C) 2012 MIPS Technologies, Inc.
+ * Copyright (C) 2012 Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+#define cpu_clear_page_function_name clear_page_cpu
+#define cpu_copy_page_function_name copy_page_cpu
+#else
+#define cpu_clear_page_function_name clear_page
+#define cpu_copy_page_function_name copy_page
+#endif
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache: 0x058 bytes
+ * R4600 v1.7: 0x05c bytes
+ * R4600 v2.0: 0x060 bytes
+ * With prefetching, 16 word strides 0x120 bytes
+ */
+EXPORT(__clear_page_start)
+LEAF(cpu_clear_page_function_name)
+1: j 1b /* Dummy, will be replaced. */
+ .space 288
+END(cpu_clear_page_function_name)
+EXPORT(__clear_page_end)
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache: 0x11c bytes
+ * R4600 v1.7: 0x080 bytes
+ * R4600 v2.0: 0x07c bytes
+ * With prefetching, 16 word strides 0x540 bytes
+ */
+EXPORT(__copy_page_start)
+LEAF(cpu_copy_page_function_name)
+1: j 1b /* Dummy, will be replaced. */
+ .space 1344
+END(cpu_copy_page_function_name)
+EXPORT(__copy_page_end)
* Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2007 Maciej W. Rozycki
* Copyright (C) 2008 Thiemo Seufer
+ * Copyright (C) 2012 MIPS Technologies, Inc.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache: 0x058 bytes
- * R4600 v1.7: 0x05c bytes
- * R4600 v2.0: 0x060 bytes
- * With prefetching, 16 word strides 0x120 bytes
- */
-
-static u32 clear_page_array[0x120 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void clear_page_cpu(void *page) __attribute__((alias("clear_page_array")));
-#else
-void clear_page(void *page) __attribute__((alias("clear_page_array")));
-#endif
-
-EXPORT_SYMBOL(clear_page);
-
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache: 0x11c bytes
- * R4600 v1.7: 0x080 bytes
- * R4600 v2.0: 0x07c bytes
- * With prefetching, 16 word strides 0x540 bytes
- */
-static u32 copy_page_array[0x540 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void
-copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array")));
-#else
-void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
-#endif
-
-EXPORT_SYMBOL(copy_page);
-
-
static int pref_bias_clear_store __cpuinitdata;
static int pref_bias_copy_load __cpuinitdata;
static int pref_bias_copy_store __cpuinitdata;
}
}
+extern u32 __clear_page_start;
+extern u32 __clear_page_end;
+extern u32 __copy_page_start;
+extern u32 __copy_page_end;
+
void __cpuinit build_clear_page(void)
{
int off;
- u32 *buf = (u32 *)&clear_page_array;
+ u32 *buf = &__clear_page_start;
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
int i;
uasm_i_jr(&buf, RA);
uasm_i_nop(&buf);
- BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array));
+ BUG_ON(buf > &__clear_page_end);
uasm_resolve_relocs(relocs, labels);
pr_debug("Synthesized clear page handler (%u instructions).\n",
- (u32)(buf - clear_page_array));
+ (u32)(buf - &__clear_page_start));
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
- for (i = 0; i < (buf - clear_page_array); i++)
- pr_debug("\t.word 0x%08x\n", clear_page_array[i]);
+ for (i = 0; i < (buf - &__clear_page_start); i++)
+ pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]);
pr_debug("\t.set pop\n");
}
void __cpuinit build_copy_page(void)
{
int off;
- u32 *buf = (u32 *)©_page_array;
+ u32 *buf = &__copy_page_start;
struct uasm_label *l = labels;
struct uasm_reloc *r = relocs;
int i;
uasm_i_jr(&buf, RA);
uasm_i_nop(&buf);
- BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array));
+ BUG_ON(buf > &__copy_page_end);
uasm_resolve_relocs(relocs, labels);
pr_debug("Synthesized copy page handler (%u instructions).\n",
- (u32)(buf - copy_page_array));
+ (u32)(buf - &__copy_page_start));
pr_debug("\t.set push\n");
pr_debug("\t.set noreorder\n");
- for (i = 0; i < (buf - copy_page_array); i++)
- pr_debug("\t.word 0x%08x\n", copy_page_array[i]);
+ for (i = 0; i < (buf - &__copy_page_start); i++)
+ pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]);
pr_debug("\t.set pop\n");
}
#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+extern void clear_page_cpu(void *page);
+extern void copy_page_cpu(void *to, void *from);
/*
* Pad descriptors to cacheline, since each is exclusively owned by a
* Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki
* Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2008, 2009 Cavium Networks, Inc.
+ * Copyright (C) 2011 MIPS Technologies, Inc.
*
* ... and the days got worse and worse and now you see
* I've gone completly out of my mind.
case CPU_R14000:
case CPU_4KC:
case CPU_4KEC:
+ case CPU_M14KC:
case CPU_SB1:
case CPU_SB1A:
case CPU_4KSC:
return;
}
- if (controller->io_resource->start < 0x00001000UL) /* FIXME */
- controller->io_resource->start = 0x00001000UL;
+ /* Change start address to avoid conflicts with ACPI and SMB devices */
+ if (controller->io_resource->start < 0x00002000UL)
+ controller->io_resource->start = 0x00002000UL;
iomem_resource.end &= 0xfffffffffULL; /* 64 GB */
ioport_resource.end = controller->io_resource->end;
}
/* Enable PCI 2.1 compatibility in PIIX4 */
-static void __init quirk_dlcsetup(struct pci_dev *dev)
+static void __devinit quirk_dlcsetup(struct pci_dev *dev)
{
u8 odlc, ndlc;
(void) pci_read_config_byte(dev, 0x82, &odlc);
unsigned int __iomem *jmpr_p =
(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
- static const int pciclocks[] __initdata = {
+ static const int pciclocks[] __initconst = {
33, 20, 25, 30, 12, 16, 37, 10
};
int pciclock = pciclocks[jmpr];
void xlp_mmu_init(void)
{
+ /* enable extended TLB and Large Fixed TLB */
write_c0_config6(read_c0_config6() | 0x24);
- current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+ /* set page mask of Fixed TLB in config7 */
write_c0_config7(PM_DEFAULT_MASK >>
(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
}
nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
#ifdef CONFIG_SMP
nlm_wakeup_secondary_cpus(0xffffffff);
+
+ /* update TLB size after waking up threads */
+ current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
register_smp_ops(&nlm_smp_ops);
#endif
}
switch (current_cpu_type()) {
case CPU_5KC:
+ case CPU_M14KC:
case CPU_20KC:
case CPU_24K:
case CPU_25KF:
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
+ case CPU_M14KC:
+ op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
+ break;
+
case CPU_20KC:
op_model_mipsxx_ops.cpu_type = "mips/20K";
break;
return 0;
}
-static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
pci_write_config_dword(pdev, 0xe4, 1 << 5);
}
-static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func0_fixup(struct pci_dev *pdev)
{
unsigned char c;
printk(KERN_INFO"via686b fix: ISA bridge done\n");
}
-static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func1_fixup(struct pci_dev *pdev)
{
printk(KERN_INFO"via686b fix: IDE\n");
printk(KERN_INFO"via686b fix: IDE done\n");
}
-static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func2_fixup(struct pci_dev *pdev)
{
/* irq routing */
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
}
-static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func3_fixup(struct pci_dev *pdev)
{
/* irq routing */
pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
}
-static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func5_fixup(struct pci_dev *pdev)
{
unsigned int val;
unsigned char c;
}
/* CS5536 SPEC. fixup */
-static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_isa_fixup(struct pci_dev *pdev)
{
/* the uart1 and uart2 interrupt in PIC is enabled as default */
pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
}
-static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ide_fixup(struct pci_dev *pdev)
{
/* setting the mutex pin as IDE function */
pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
CS5536_IDE_FLASH_SIGNATURE);
}
-static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_acc_fixup(struct pci_dev *pdev)
{
/* enable the AUDIO interrupt in PIC */
pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
}
-static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
{
/* enable the OHCI interrupt in PIC */
/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
}
-static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
{
u32 hi, lo;
pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
}
-static void __init loongson_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson_nec_fixup(struct pci_dev *pdev)
{
unsigned int val;
return 0;
}
-static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func0_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
- static int piixirqmap[16] __initdata = { /* PIIX PIRQC[A:D] irq mappings */
+ static int piixirqmap[16] __devinitdata = { /* PIIX PIRQC[A:D] irq mappings */
0, 0, 0, 3,
4, 5, 6, 7,
0, 9, 10, 11,
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
malta_piix_func0_fixup);
-static void __init malta_piix_func1_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func1_fixup(struct pci_dev *pdev)
{
unsigned char reg_val;
#include <asm/vr41xx/mpc30x.h>
-static const int internal_func_irqs[] __initdata = {
+static const int internal_func_irqs[] __initconst = {
VRC4173_CASCADE_IRQ,
VRC4173_AC97_IRQ,
VRC4173_USB_IRQ,
};
-static const int irq_tab_mpc30x[] __initdata = {
+static const int irq_tab_mpc30x[] __initconst = {
[12] = VRC4173_PCMCIA1_IRQ,
[13] = VRC4173_PCMCIA2_IRQ,
[29] = MQ200_IRQ,
* Set the BCM1250, etc. PCI host bridge's TRDY timeout
* to the finite max.
*/
-static void __init quirk_sb1250_pci(struct pci_dev *dev)
+static void __devinit quirk_sb1250_pci(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x40, 0xff);
}
/*
* The BCM1250, etc. PCI/HT bridge reports as a host bridge.
*/
-static void __init quirk_sb1250_ht(struct pci_dev *dev)
+static void __devinit quirk_sb1250_ht(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_PCI << 8;
}
/*
* Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
*/
-static void __init quirk_sp1011(struct pci_dev *dev)
+static void __devinit quirk_sp1011(struct pci_dev *dev)
{
pci_write_config_byte(dev, 0x64, 0xff);
}
}
#ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
{
struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
bridge->b_widget.w_tflush; /* Flush */
}
-static void __init pci_fixup_ioc3(struct pci_dev *d)
+static void __devinit pci_fixup_ioc3(struct pci_dev *d)
{
pci_disable_swapping(d);
}
/* setup reset gpio used by pci */
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
- if (reset_gpio > 0)
+ if (gpio_is_valid(reset_gpio))
devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
/* enable auto-switching between PCI and EBU */
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
/* toggle reset pin */
- if (reset_gpio > 0) {
+ if (gpio_is_valid(reset_gpio)) {
__gpio_set_value(reset_gpio, 0);
wmb();
mdelay(1);
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <linux/console.h>
+#include <linux/pci_regs.h>
#include <asm/io.h>
.io_offset = 0x00000000UL,
};
+/*
+ * The top level PCIe links on the XLS PCIe controller appear as
+ * bridges. Given a device, this function finds which link it is
+ * on.
+ */
+static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev)
+{
+ struct pci_bus *bus, *p;
+
+ /* Find the bridge on bus 0 */
+ bus = dev->bus;
+ for (p = bus->parent; p && p->number != 0; p = p->parent)
+ bus = p;
+
+ return p ? bus->self : NULL;
+}
+
static int get_irq_vector(const struct pci_dev *dev)
{
+ struct pci_dev *lnk;
+
if (!nlm_chip_is_xls())
- return PIC_PCIX_IRQ; /* for XLR just one IRQ*/
+ return PIC_PCIX_IRQ; /* for XLR just one IRQ */
/*
* For XLS PCIe, there is an IRQ per Link, find out which
* link the device is on to assign interrupts
- */
- if (dev->bus->self == NULL)
+ */
+ lnk = xls_get_pcie_link(dev);
+ if (lnk == NULL)
return 0;
- switch (dev->bus->self->devfn) {
- case 0x0:
+ switch (PCI_SLOT(lnk->devfn)) {
+ case 0:
return PIC_PCIE_LINK0_IRQ;
- case 0x8:
+ case 1:
return PIC_PCIE_LINK1_IRQ;
- case 0x10:
+ case 2:
if (nlm_chip_is_xls_b())
return PIC_PCIE_XLSB0_LINK2_IRQ;
else
return PIC_PCIE_LINK2_IRQ;
- case 0x18:
+ case 3:
if (nlm_chip_is_xls_b())
return PIC_PCIE_XLSB0_LINK3_IRQ;
else
return PIC_PCIE_LINK3_IRQ;
}
- WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
+ WARN(1, "Unexpected devfn %d\n", lnk->devfn);
return 0;
}
int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
struct msi_msg msg;
+ struct pci_dev *lnk;
int irq, ret;
+ u16 val;
+
+ /* MSI not supported on XLR */
+ if (!nlm_chip_is_xls())
+ return 1;
+
+ /*
+ * Enable MSI on the XLS PCIe controller bridge which was disabled
+ * at enumeration, the bridge MSI capability is at 0x50
+ */
+ lnk = xls_get_pcie_link(dev);
+ if (lnk == NULL)
+ return 1;
+
+ pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val);
+ if ((val & PCI_MSI_FLAGS_ENABLE) == 0) {
+ val |= PCI_MSI_FLAGS_ENABLE;
+ pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val);
+ }
irq = get_irq_vector(dev);
if (irq <= 0)
}
} else {
/* XLR PCI controller ACK */
- irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack);
+ irq_set_handler_data(PIC_PCIX_IRQ, xlr_pci_ack);
}
return 0;
*/
static void __cpuinit yos_init_secondary(void)
{
- set_c0_status(ST0_CO | ST0_IE | ST0_IM);
}
static void __cpuinit yos_smp_finish(void)
{
+ set_c0_status(ST0_CO | ST0_IM | ST0_IE);
}
/* Hook for after all CPUs are online */
#define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x))
-const struct register_map calliope_register_map __initdata = {
+const struct register_map calliope_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},
#define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x))
-const struct register_map cronus_register_map __initdata = {
+const struct register_map cronus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},
#include <linux/init.h>
#include <asm/mach-powertv/asic.h>
-const struct register_map gaia_register_map __initdata = {
+const struct register_map gaia_register_map __initconst = {
.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},
#define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x))
-const struct register_map zeus_register_map __initdata = {
+const struct register_map zeus_register_map __initconst = {
.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},
return err;
}
-static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev)
{
int irq; /* PCI/ISA Bridge interrupt */
u8 reg_64;
#define PTRACE_GETFPREGS 14
#define PTRACE_SETFPREGS 15
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD 0x00000001
-
#ifdef __KERNEL__
#define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL)
}
#ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
#endif
#define get_thread_info(ti) get_task_struct((ti)->task)
#define put_thread_info(ti) put_task_struct((ti)->task)
#ifndef _ASM_TIMEX_H
#define _ASM_TIMEX_H
-#include <asm/hardirq.h>
#include <unit/timex.h>
#define TICK_SIZE (tick_nsec / 1000)
extern int init_clockevents(void);
extern int init_clocksource(void);
-static inline void setup_jiffies_interrupt(int irq,
- struct irqaction *action)
-{
- u16 tmp;
- setup_irq(irq, action);
- set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
- GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
- tmp = GxICR(irq);
-}
-
#endif /* __KERNEL__ */
#endif /* _ASM_TIMEX_H */
{
}
+static inline void setup_jiffies_interrupt(int irq,
+ struct irqaction *action)
+{
+ u16 tmp;
+ setup_irq(irq, action);
+ set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
+ GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ tmp = GxICR(irq);
+}
+
int __init init_clockevents(void)
{
struct clock_event_device *cd;
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/irqreturn.h>
+
struct clocksource;
struct clock_event_device;
case SC1TXIRQ:
#ifdef CONFIG_MN10300_TTYSM1_TIMER12
case TM12IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER9
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER9)
case TM9IRQ:
-#elif CONFIG_MN10300_TTYSM1_TIMER3
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
case TM3IRQ:
#endif /* CONFIG_MN10300_TTYSM1_TIMER12 */
#endif /* CONFIG_MN10300_TTYSM1 */
else
ret = setup_frame(sig, ka, oldset, regs);
if (ret)
- return;
+ return ret;
signal_delivered(sig, info, ka, regs,
- test_thread_flag(TIF_SINGLESTEP));
+ test_thread_flag(TIF_SINGLESTEP));
+ return 0;
}
/*
#include <linux/kdebug.h>
#include <linux/bug.h>
#include <linux/irq.h>
+#include <linux/export.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/gfp.h>
+#include <linux/export.h>
#include <asm/io.h>
static unsigned long pci_sram_allocated = 0xbc000000;
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
#include <linux/platform_device.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/timex.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/io.h>
+#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/processor.h>
#include <asm/intctl-regs.h>
#ifndef _ASM_UNIT_TIMEX_H
#define _ASM_UNIT_TIMEX_H
-#ifndef __ASSEMBLY__
-#include <linux/irq.h>
-#endif /* __ASSEMBLY__ */
-
#include <asm/timer-regs.h>
#include <unit/clock.h>
#include <asm/param.h>
}
#ifdef CONFIG_PPC_BOOK3E
-#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory");
-#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory");
+#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory")
+#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory")
#else
#define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1)
return !regs->softe;
}
+extern bool prep_irq_for_idle(void);
+
#else /* CONFIG_PPC64 */
#define SET_MSR_EE(x) mtmsr(x)
*/
if (unlikely(irq_happened != PACA_IRQ_HARD_DIS))
__hard_irq_disable();
-#ifdef CONFIG_TRACE_IRQFLAG
+#ifdef CONFIG_TRACE_IRQFLAGS
else {
/*
* We should already be hard disabled here. We had bugs
__hard_irq_enable();
}
+/*
+ * This is a helper to use when about to go into idle low-power
+ * when the latter has the side effect of re-enabling interrupts
+ * (such as calling H_CEDE under pHyp).
+ *
+ * You call this function with interrupts soft-disabled (this is
+ * already the case when ppc_md.power_save is called). The function
+ * will return whether to enter power save or just return.
+ *
+ * In the former case, it will have notified lockdep of interrupts
+ * being re-enabled and generally sanitized the lazy irq state,
+ * and in the latter case it will leave with interrupts hard
+ * disabled and marked as such, so the local_irq_enable() call
+ * in cpu_idle() will properly re-enable everything.
+ */
+bool prep_irq_for_idle(void)
+{
+ /*
+ * First we need to hard disable to ensure no interrupt
+ * occurs before we effectively enter the low power state
+ */
+ hard_irq_disable();
+
+ /*
+ * If anything happened while we were soft-disabled,
+ * we return now and do not enter the low power state.
+ */
+ if (lazy_irq_pending())
+ return false;
+
+ /* Tell lockdep we are about to re-enable */
+ trace_hardirqs_on();
+
+ /*
+ * Mark interrupts as soft-enabled and clear the
+ * PACA_IRQ_HARD_DIS from the pending mask since we
+ * are about to hard enable as well as a side effect
+ * of entering the low power state.
+ */
+ local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS;
+ local_paca->soft_enabled = 1;
+
+ /* Tell the caller to enter the low power state */
+ return true;
+}
+
#endif /* CONFIG_PPC64 */
int arch_show_interrupts(struct seq_file *p, int prec)
case H_PUT_TCE:
return kvmppc_h_pr_put_tce(vcpu);
case H_CEDE:
+ vcpu->arch.shared->msr |= MSR_EE;
kvm_vcpu_block(vcpu);
clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
vcpu->stat.halt_wakeup++;
unsigned int n, rc, ranges, is_kexec_kdump = 0;
unsigned long lmb_size, base, size, sz;
int nid;
- struct assoc_arrays aa;
+ struct assoc_arrays aa = { .arrays = NULL };
n = of_get_drconf_memory(memory, &dm);
if (!n)
{
unsigned long ctrl, thread_switch_control;
- /*
- * We need to hard disable interrupts, the local_irq_enable() done by
- * our caller upon return will hard re-enable.
- */
- hard_irq_disable();
+ /* Ensure our interrupt state is properly tracked */
+ if (!prep_irq_for_idle())
+ return;
ctrl = mfspr(SPRN_CTRLF);
*/
ctrl &= ~(CTRL_RUNLATCH | CTRL_TE);
mtspr(SPRN_CTRLT, ctrl);
+
+ /* Re-enable interrupts in MSR */
+ __hard_irq_enable();
}
static int cbe_system_reset_exception(struct pt_regs *regs)
static void check_and_cede_processor(void)
{
/*
- * Interrupts are soft-disabled at this point,
- * but not hard disabled. So an interrupt might have
- * occurred before entering NAP, and would be potentially
- * lost (edge events, decrementer events, etc...) unless
- * we first hard disable then check.
+ * Ensure our interrupt state is properly tracked,
+ * also checks if no interrupt has occurred while we
+ * were soft-disabled
*/
- hard_irq_disable();
- if (!lazy_irq_pending())
+ if (prep_irq_for_idle()) {
cede_processor();
+#ifdef CONFIG_TRACE_IRQFLAGS
+ /* Ensure that H_CEDE returns with IRQs on */
+ if (WARN_ON(!(mfmsr() & MSR_EE)))
+ __hard_irq_enable();
+#endif
+ }
}
static int dedicated_cede_loop(struct cpuidle_device *dev,
return -1;
}
-#define outb(x, y) BUG()
-#define outw(x, y) BUG()
-#define outl(x, y) BUG()
+static inline void outb(unsigned char x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outw(unsigned short x, unsigned long port)
+{
+ BUG();
+}
+
+static inline void outl(unsigned int x, unsigned long port)
+{
+ BUG();
+}
#define inb_p(addr) inb(addr)
#define inw_p(addr) inw(addr)
#include <linux/serial_core.h>
#include <linux/io.h>
#include <cpu/serial.h>
-#include <asm/gpio.h>
+#include <cpu/gpio.h>
static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag)
{
#include <linux/kernel.h>
#include <linux/string.h>
+#include <asm/byteorder.h>
#include <asm/backtrace.h>
#include <asm/tile-desc.h>
#include <arch/abi.h>
bytes_to_prefetch / sizeof(tile_bundle_bits);
}
- /* Decode the next bundle. */
- bundle.bits = prefetched_bundles[next_bundle++];
+ /*
+ * Decode the next bundle.
+ * TILE always stores instruction bundles in little-endian
+ * mode, even when the chip is running in big-endian mode.
+ */
+ bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]);
bundle.num_insns =
parse_insn_tile(bundle.bits, pc, bundle.insns);
num_info_ops = bt_get_info_ops(&bundle, info_operands);
struct task_struct *from = current, *to = arg;
to->thread.saved_task = from;
- rcu_switch_from(from);
switch_to(from, to, from);
}
return nr;
}
+#ifdef CONFIG_SECCOMP
+static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr)
+{
+ if (!seccomp_mode(&tsk->seccomp))
+ return 0;
+ task_pt_regs(tsk)->orig_ax = syscall_nr;
+ task_pt_regs(tsk)->ax = syscall_nr;
+ return __secure_computing(syscall_nr);
+}
+#else
+#define vsyscall_seccomp(_tsk, _nr) 0
+#endif
+
static bool write_ok_or_segv(unsigned long ptr, size_t size)
{
/*
int vsyscall_nr;
int prev_sig_on_uaccess_error;
long ret;
+ int skip;
/*
* No point in checking CS -- the only way to get here is a user mode
}
tsk = current;
- if (seccomp_mode(&tsk->seccomp))
- do_exit(SIGKILL);
-
/*
* With a real vsyscall, page faults cause SIGSEGV. We want to
* preserve that behavior to make writing exploits harder.
* address 0".
*/
ret = -EFAULT;
+ skip = 0;
switch (vsyscall_nr) {
case 0:
+ skip = vsyscall_seccomp(tsk, __NR_gettimeofday);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
!write_ok_or_segv(regs->si, sizeof(struct timezone)))
break;
break;
case 1:
+ skip = vsyscall_seccomp(tsk, __NR_time);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(time_t)))
break;
break;
case 2:
+ skip = vsyscall_seccomp(tsk, __NR_getcpu);
+ if (skip)
+ break;
+
if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
!write_ok_or_segv(regs->si, sizeof(unsigned)))
break;
current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
+ if (skip) {
+ if ((long)regs->ax <= 0L) /* seccomp errno emulation */
+ goto do_ret;
+ goto done; /* seccomp trace/trap */
+ }
+
if (ret == -EFAULT) {
/* Bad news -- userspace fed a bad pointer to a vsyscall. */
warn_bad_vsyscall(KERN_INFO, regs,
regs->ax = ret;
+do_ret:
/* Emulate a ret instruction. */
regs->ip = caller;
regs->sp += 8;
-
+done:
return true;
sigsegv:
/* Don't leak any random bits. */
- memset(elfregs, 0, sizeof (elfregs));
+ memset(elfregs, 0, sizeof(*elfregs));
/* Note: PS.EXCM is not set while user task is running; its
* being set in regs->ps is for exception handling convenience.
return_ACPI_STATUS(status);
}
- if (sleep_state != ACPI_STATE_S5) {
- /*
- * Disable BM arbitration. This feature is contained within an
- * optional register (PM2 Control), so ignore a BAD_ADDRESS
- * exception.
- */
- status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 1);
- if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
- return_ACPI_STATUS(status);
- }
- }
-
/*
* 1) Disable/Clear all GPEs
* 2) Enable all wakeup GPEs
[ACPI_EVENT_POWER_BUTTON].
status_register_id, ACPI_CLEAR_STATUS);
- /*
- * Enable BM arbitration. This feature is contained within an
- * optional register (PM2 Control), so ignore a BAD_ADDRESS
- * exception.
- */
- status = acpi_write_bit_register(ACPI_BITREG_ARB_DISABLE, 0);
- if (ACPI_FAILURE(status) && (status != AE_BAD_ADDRESS)) {
- return_ACPI_STATUS(status);
- }
-
acpi_hw_execute_sleep_method(METHOD_PATHNAME__SST, ACPI_SST_WORKING);
return_ACPI_STATUS(status);
}
/* Create the new outer package and populate it */
status =
- acpi_ns_wrap_with_package(data, *elements,
+ acpi_ns_wrap_with_package(data, return_object,
return_object_ptr);
if (ACPI_FAILURE(status)) {
return (status);
* Processor (CPU3, 0x03, 0x00000410, 0x06) {}
* }
*
- * Ignores apic_id and always return 0 for CPU0's handle.
+ * Ignores apic_id and always returns 0 for the processor
+ * handle with acpi id 0 if nr_cpu_ids is 1.
+ * This should be the case if SMP tables are not found.
* Return -1 for other CPU's handle.
*/
- if (acpi_id == 0)
+ if (nr_cpu_ids <= 1 && acpi_id == 0)
return acpi_id;
else
return apic_id;
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/amba/bus.h>
+#include <linux/sizes.h>
#include <asm/irq.h>
-#include <asm/sizes.h>
#define to_amba_driver(d) container_of(d, struct amba_driver, drv)
#include <linux/wait.h>
#include <linux/async.h>
#include <linux/pm_runtime.h>
+#include <scsi/scsi_scan.h>
#include "base.h"
#include "power/power.h"
/* wait for the known devices to complete their probing */
wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
async_synchronize_full();
+ scsi_complete_async_scans();
}
EXPORT_SYMBOL_GPL(wait_for_device_probe);
struct gendisk *disk;
int err;
+ err = -ENOMEM;
lo = kzalloc(sizeof(*lo), GFP_KERNEL);
- if (!lo) {
- err = -ENOMEM;
+ if (!lo)
goto out;
- }
- err = idr_pre_get(&loop_index_idr, GFP_KERNEL);
- if (err < 0)
+ if (!idr_pre_get(&loop_index_idr, GFP_KERNEL))
goto out_free_dev;
if (i >= 0) {
/ sizeof (*ondisk))
return -EINVAL;
header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
- snap_count * sizeof (*ondisk),
+ snap_count * sizeof(u64),
gfp_flags);
if (!header->snapc)
return -ENOMEM;
op = (void *)(replyhead + 1);
rc = le32_to_cpu(replyhead->result);
bytes = le64_to_cpu(op->extent.length);
- read_op = (le32_to_cpu(op->op) == CEPH_OSD_OP_READ);
+ read_op = (le16_to_cpu(op->op) == CEPH_OSD_OP_READ);
dout("rbd_req_cb bytes=%lld readop=%d rc=%d\n", bytes, read_op, rc);
/* clock parents */
static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
-static const char *uart0_parents[] = { "pll5_clk", "uart_synth_gate_clk", };
-static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
-static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+static const char *uart0_parents[] = { "pll5_clk", "uart_syn_gclk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_syn_gclk", };
+static const char *gmac_phy_input_parents[] = { "gmii_pad_clk", "pll2_clk",
"osc_25m_clk", };
-static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
- "gmac_phy_synth_gate_clk", };
+static const char *gmac_phy_parents[] = { "phy_input_mclk", "phy_syn_gclk", };
static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
-static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_syn_clk", };
static const char *i2s_src_parents[] = { "vco1div2_clk", "none", "pll3_clk",
"i2s_src_pad_clk", };
-static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mclk", "i2s_prs1_clk", };
static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll3_clk", };
static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll2_clk", };
static const char *rmii_phy_parents[] = { "ras_tx50_clk", "none",
- "ras_pll2_clk", "ras_synth0_clk", };
+ "ras_pll2_clk", "ras_syn0_clk", };
static const char *smii_rgmii_phy_parents[] = { "none", "ras_tx125_clk",
- "ras_pll2_clk", "ras_synth0_clk", };
-static const char *uart_parents[] = { "ras_apb_clk", "gen_synth3_clk", };
-static const char *i2c_parents[] = { "ras_apb_clk", "gen_synth1_clk", };
-static const char *ssp1_parents[] = { "ras_apb_clk", "gen_synth1_clk",
+ "ras_pll2_clk", "ras_syn0_clk", };
+static const char *uart_parents[] = { "ras_apb_clk", "gen_syn3_clk", };
+static const char *i2c_parents[] = { "ras_apb_clk", "gen_syn1_clk", };
+static const char *ssp1_parents[] = { "ras_apb_clk", "gen_syn1_clk",
"ras_plclk0_clk", };
-static const char *pci_parents[] = { "ras_pll3_clk", "gen_synth2_clk", };
-static const char *tdm_parents[] = { "ras_pll3_clk", "gen_synth1_clk", };
+static const char *pci_parents[] = { "ras_pll3_clk", "gen_syn2_clk", };
+static const char *tdm_parents[] = { "ras_pll3_clk", "gen_syn1_clk", };
void __init spear1310_clk_init(void)
{
25000000);
clk_register_clkdev(clk, "osc_25m_clk", NULL);
- clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
- CLK_IS_ROOT, 125000000);
- clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+ clk = clk_register_fixed_rate(NULL, "gmii_pad_clk", NULL, CLK_IS_ROOT,
+ 125000000);
+ clk_register_clkdev(clk, "gmii_pad_clk", NULL);
clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
CLK_IS_ROOT, 12288000);
/* clock derived from 24 or 25 MHz osc clk */
/* vco-pll */
- clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco1_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL1_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco1_mux_clk", NULL);
- clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
+ clk_register_clkdev(clk, "vco1_mclk", NULL);
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mclk",
0, SPEAR1310_PLL1_CTR, SPEAR1310_PLL1_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco2_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL2_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco2_mux_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
+ clk_register_clkdev(clk, "vco2_mclk", NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mclk",
0, SPEAR1310_PLL2_CTR, SPEAR1310_PLL2_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
- clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco3_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1310_PLL_CFG,
SPEAR1310_PLL3_CLK_SHIFT, SPEAR1310_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco3_mux_clk", NULL);
- clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
+ clk_register_clkdev(clk, "vco3_mclk", NULL);
+ clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mclk",
0, SPEAR1310_PLL3_CTR, SPEAR1310_PLL3_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco3_clk", NULL);
/* peripherals */
clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
128);
- clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+ clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_THSENS_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_thermal");
clk_register_clkdev(clk, "apb_clk", NULL);
/* gpt clocks */
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT0_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt0_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT1_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_GPT1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT2_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_GPT3_CLK_SHIFT, SPEAR1310_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_GPT3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* others */
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_UART_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_UART_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0000000.serial");
- clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+ clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk",
"vco1div2_clk", 0, SPEAR1310_SDHCI_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
- clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "sdhci_syn_clk", NULL);
+ clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b3000000.sdhci");
- clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_CFXD_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
- clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+ clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_CFXD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "cfxd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2800000.cf");
clk_register_clkdev(clk, NULL, "arasan_xd");
- clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1310_C3_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "c3_synth_clk", NULL);
- clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+ clk = clk_register_aux("c3_syn_clk", "c3_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1310_C3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "c3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "c3_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+ clk = clk_register_mux(NULL, "c3_mclk", c3_parents,
ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG,
SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "c3_mclk", NULL);
- clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "c3");
/* gmac */
- clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
- gmac_phy_input_parents,
+ clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents,
ARRAY_SIZE(gmac_phy_input_parents), 0,
SPEAR1310_GMAC_CLK_CFG,
SPEAR1310_GMAC_PHY_INPUT_CLK_SHIFT,
SPEAR1310_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+ clk_register_clkdev(clk, "phy_input_mclk", NULL);
- clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
- "gmac_phy_input_mux_clk", 0, SPEAR1310_GMAC_CLK_SYNT,
- NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
- clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+ clk = clk_register_aux("phy_syn_clk", "phy_syn_gclk", "phy_input_mclk",
+ 0, SPEAR1310_GMAC_CLK_SYNT, NULL, gmac_rtbl,
+ ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "phy_syn_clk", NULL);
+ clk_register_clkdev(clk1, "phy_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+ clk = clk_register_mux(NULL, "phy_mclk", gmac_phy_parents,
ARRAY_SIZE(gmac_phy_parents), 0,
SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT,
SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.0");
/* clcd */
- clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents,
ARRAY_SIZE(clcd_synth_parents), 0,
SPEAR1310_CLCD_CLK_SYNT, SPEAR1310_CLCD_SYNT_CLK_SHIFT,
SPEAR1310_CLCD_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_mclk", NULL);
- clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+ clk = clk_register_frac("clcd_syn_clk", "clcd_syn_mclk", 0,
SPEAR1310_CLCD_CLK_SYNT, clcd_rtbl,
ARRAY_SIZE(clcd_rtbl), &_lock);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
- clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+ clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents,
ARRAY_SIZE(clcd_pixel_parents), 0,
SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT,
SPEAR1310_CLCD_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "clcd_clk", NULL);
/* i2s */
- clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents,
ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG,
SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK,
0, &_lock);
clk_register_clkdev(clk, "i2s_src_clk", NULL);
- clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+ clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0,
SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
- clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+ clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents,
ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG,
SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0,
&_lock);
clk_register_clkdev(clk, "i2s_ref_clk", NULL);
- clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0,
SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
- clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
+ clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk",
"i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG,
&i2s_sclk_masks, i2s_sclk_rtbl,
ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
- clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+ clk_register_clkdev(clk1, "i2s_sclk_gclk", NULL);
/* clock derived from ahb clk */
clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
&_lock);
clk_register_clkdev(clk, "sysram1_clk", NULL);
- clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+ clk = clk_register_aux("adc_syn_clk", "adc_syn_gclk", "ahb_clk",
0, SPEAR1310_ADC_CLK_SYNT, NULL, adc_rtbl,
ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "adc_synth_clk", NULL);
- clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "adc_syn_clk", NULL);
+ clk_register_clkdev(clk1, "adc_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0,
SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "adc_clk");
clk_register_clkdev(clk, NULL, "e0300000.kbd");
/* RAS clks */
- clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
- gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
- 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn0_1_mclk", gen_synth0_1_parents,
+ ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_RAS_SYNT0_1_CLK_SHIFT,
SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_1_clk", NULL);
- clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
- gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
- 0, SPEAR1310_PLL_CFG, SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents,
+ ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1310_PLL_CFG,
+ SPEAR1310_RAS_SYNT2_3_CLK_SHIFT,
SPEAR1310_RAS_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_3_clk", NULL);
- clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0,
SPEAR1310_RAS_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_clk", NULL);
- clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0,
SPEAR1310_RAS_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn1_clk", NULL);
- clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0,
SPEAR1310_RAS_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_clk", NULL);
- clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0,
SPEAR1310_RAS_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn3_clk", NULL);
clk = clk_register_gate(NULL, "ras_osc_24m_clk", "osc_24m_clk", 0,
SPEAR1310_RAS_CLK_ENB, SPEAR1310_OSC_24M_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "ras_pll3_clk", NULL);
- clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_125m_pad_clk", 0,
+ clk = clk_register_gate(NULL, "ras_tx125_clk", "gmii_pad_clk", 0,
SPEAR1310_RAS_CLK_ENB, SPEAR1310_C125M_PAD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "ras_tx125_clk", NULL);
&_lock);
clk_register_clkdev(clk, NULL, "5c700000.eth");
- clk = clk_register_mux(NULL, "smii_rgmii_phy_mux_clk",
+ clk = clk_register_mux(NULL, "smii_rgmii_phy_mclk",
smii_rgmii_phy_parents,
ARRAY_SIZE(smii_rgmii_phy_parents), 0,
SPEAR1310_RAS_CTRL_REG1,
clk_register_clkdev(clk, NULL, "stmmacphy.2");
clk_register_clkdev(clk, NULL, "stmmacphy.4");
- clk = clk_register_mux(NULL, "rmii_phy_mux_clk", rmii_phy_parents,
+ clk = clk_register_mux(NULL, "rmii_phy_mclk", rmii_phy_parents,
ARRAY_SIZE(rmii_phy_parents), 0,
SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT,
SPEAR1310_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.3");
- clk = clk_register_mux(NULL, "uart1_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart1_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART1_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart1_mclk", NULL);
- clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart1_clk", "uart1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5c800000.serial");
- clk = clk_register_mux(NULL, "uart2_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart2_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART2_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart2_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart2_mclk", NULL);
- clk = clk_register_gate(NULL, "uart2_clk", "uart2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart2_clk", "uart2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5c900000.serial");
- clk = clk_register_mux(NULL, "uart3_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart3_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART3_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart3_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart3_mclk", NULL);
- clk = clk_register_gate(NULL, "uart3_clk", "uart3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart3_clk", "uart3_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5ca00000.serial");
- clk = clk_register_mux(NULL, "uart4_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart4_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART4_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart4_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart4_mclk", NULL);
- clk = clk_register_gate(NULL, "uart4_clk", "uart4_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart4_clk", "uart4_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART4_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cb00000.serial");
- clk = clk_register_mux(NULL, "uart5_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart5_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_UART5_CLK_SHIFT, SPEAR1310_RAS_UART_CLK_MASK,
0, &_lock);
- clk_register_clkdev(clk, "uart5_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart5_mclk", NULL);
- clk = clk_register_gate(NULL, "uart5_clk", "uart5_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart5_clk", "uart5_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_UART5_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cc00000.serial");
- clk = clk_register_mux(NULL, "i2c1_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c1_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C1_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c1_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c1_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c1_clk", "i2c1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cd00000.i2c");
- clk = clk_register_mux(NULL, "i2c2_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c2_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C2_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c2_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c2_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c2_clk", "i2c2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5ce00000.i2c");
- clk = clk_register_mux(NULL, "i2c3_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c3_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C3_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c3_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c3_clk", "i2c3_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5cf00000.i2c");
- clk = clk_register_mux(NULL, "i2c4_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c4_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C4_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c4_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c4_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c4_clk", "i2c4_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C4_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d000000.i2c");
- clk = clk_register_mux(NULL, "i2c5_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c5_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C5_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c5_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c5_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c5_clk", "i2c5_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C5_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d100000.i2c");
- clk = clk_register_mux(NULL, "i2c6_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c6_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C6_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c6_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c6_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c6_clk", "i2c6_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C6_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d200000.i2c");
- clk = clk_register_mux(NULL, "i2c7_mux_clk", i2c_parents,
+ clk = clk_register_mux(NULL, "i2c7_mclk", i2c_parents,
ARRAY_SIZE(i2c_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_I2C7_CLK_SHIFT, SPEAR1310_I2C_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "i2c7_mux_clk", NULL);
+ clk_register_clkdev(clk, "i2c7_mclk", NULL);
- clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2c7_clk", "i2c7_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_I2C7_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d300000.i2c");
- clk = clk_register_mux(NULL, "ssp1_mux_clk", ssp1_parents,
+ clk = clk_register_mux(NULL, "ssp1_mclk", ssp1_parents,
ARRAY_SIZE(ssp1_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_SSP1_CLK_SHIFT, SPEAR1310_SSP1_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "ssp1_mux_clk", NULL);
+ clk_register_clkdev(clk, "ssp1_mclk", NULL);
- clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "ssp1_clk", "ssp1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_SSP1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "5d400000.spi");
- clk = clk_register_mux(NULL, "pci_mux_clk", pci_parents,
+ clk = clk_register_mux(NULL, "pci_mclk", pci_parents,
ARRAY_SIZE(pci_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_PCI_CLK_SHIFT, SPEAR1310_PCI_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "pci_mux_clk", NULL);
+ clk_register_clkdev(clk, "pci_mclk", NULL);
- clk = clk_register_gate(NULL, "pci_clk", "pci_mux_clk", 0,
+ clk = clk_register_gate(NULL, "pci_clk", "pci_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_PCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "pci");
- clk = clk_register_mux(NULL, "tdm1_mux_clk", tdm_parents,
+ clk = clk_register_mux(NULL, "tdm1_mclk", tdm_parents,
ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_TDM1_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "tdm1_mux_clk", NULL);
+ clk_register_clkdev(clk, "tdm1_mclk", NULL);
- clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "tdm1_clk", "tdm1_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "tdm_hdlc.0");
- clk = clk_register_mux(NULL, "tdm2_mux_clk", tdm_parents,
+ clk = clk_register_mux(NULL, "tdm2_mclk", tdm_parents,
ARRAY_SIZE(tdm_parents), 0, SPEAR1310_RAS_CTRL_REG0,
SPEAR1310_TDM2_CLK_SHIFT, SPEAR1310_TDM_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "tdm2_mux_clk", NULL);
+ clk_register_clkdev(clk, "tdm2_mclk", NULL);
- clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "tdm2_clk", "tdm2_mclk", 0,
SPEAR1310_RAS_SW_CLK_CTRL, SPEAR1310_TDM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "tdm_hdlc.1");
/* clock parents */
static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", };
-static const char *sys_parents[] = { "none", "pll1_clk", "none", "none",
- "sys_synth_clk", "none", "pll2_clk", "pll3_clk", };
-static const char *ahb_parents[] = { "cpu_div3_clk", "amba_synth_clk", };
+static const char *sys_parents[] = { "pll1_clk", "pll1_clk", "pll1_clk",
+ "pll1_clk", "sys_synth_clk", "sys_synth_clk", "pll2_clk", "pll3_clk", };
+static const char *ahb_parents[] = { "cpu_div3_clk", "amba_syn_clk", };
static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", };
static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk",
- "uart0_synth_gate_clk", };
+ "uart0_syn_gclk", };
static const char *uart1_parents[] = { "pll5_clk", "osc_24m_clk",
- "uart1_synth_gate_clk", };
-static const char *c3_parents[] = { "pll5_clk", "c3_synth_gate_clk", };
-static const char *gmac_phy_input_parents[] = { "gmii_125m_pad_clk", "pll2_clk",
+ "uart1_syn_gclk", };
+static const char *c3_parents[] = { "pll5_clk", "c3_syn_gclk", };
+static const char *gmac_phy_input_parents[] = { "gmii_pad_clk", "pll2_clk",
"osc_25m_clk", };
-static const char *gmac_phy_parents[] = { "gmac_phy_input_mux_clk",
- "gmac_phy_synth_gate_clk", };
+static const char *gmac_phy_parents[] = { "phy_input_mclk", "phy_syn_gclk", };
static const char *clcd_synth_parents[] = { "vco1div4_clk", "pll2_clk", };
-static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_synth_clk", };
+static const char *clcd_pixel_parents[] = { "pll5_clk", "clcd_syn_clk", };
static const char *i2s_src_parents[] = { "vco1div2_clk", "pll2_clk", "pll3_clk",
"i2s_src_pad_clk", };
-static const char *i2s_ref_parents[] = { "i2s_src_mux_clk", "i2s_prs1_clk", };
-static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_synth2_clk",
-};
-static const char *spdif_in_parents[] = { "pll2_clk", "gen_synth3_clk", };
+static const char *i2s_ref_parents[] = { "i2s_src_mclk", "i2s_prs1_clk", };
+static const char *spdif_out_parents[] = { "i2s_src_pad_clk", "gen_syn2_clk", };
+static const char *spdif_in_parents[] = { "pll2_clk", "gen_syn3_clk", };
static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk",
"pll3_clk", };
25000000);
clk_register_clkdev(clk, "osc_25m_clk", NULL);
- clk = clk_register_fixed_rate(NULL, "gmii_125m_pad_clk", NULL,
- CLK_IS_ROOT, 125000000);
- clk_register_clkdev(clk, "gmii_125m_pad_clk", NULL);
+ clk = clk_register_fixed_rate(NULL, "gmii_pad_clk", NULL, CLK_IS_ROOT,
+ 125000000);
+ clk_register_clkdev(clk, "gmii_pad_clk", NULL);
clk = clk_register_fixed_rate(NULL, "i2s_src_pad_clk", NULL,
CLK_IS_ROOT, 12288000);
/* clock derived from 24 or 25 MHz osc clk */
/* vco-pll */
- clk = clk_register_mux(NULL, "vco1_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco1_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL1_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco1_mux_clk", NULL);
- clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mux_clk",
- 0, SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco1_mclk", NULL);
+ clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "vco1_mclk", 0,
+ SPEAR1340_PLL1_CTR, SPEAR1340_PLL1_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_mux(NULL, "vco2_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco2_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL2_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco2_mux_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mux_clk",
- 0, SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco2_mclk", NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "vco2_mclk", 0,
+ SPEAR1340_PLL2_CTR, SPEAR1340_PLL2_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
- clk = clk_register_mux(NULL, "vco3_mux_clk", vco_parents,
+ clk = clk_register_mux(NULL, "vco3_mclk", vco_parents,
ARRAY_SIZE(vco_parents), 0, SPEAR1340_PLL_CFG,
SPEAR1340_PLL3_CLK_SHIFT, SPEAR1340_PLL_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "vco3_mux_clk", NULL);
- clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mux_clk",
- 0, SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
+ clk_register_clkdev(clk, "vco3_mclk", NULL);
+ clk = clk_register_vco_pll("vco3_clk", "pll3_clk", NULL, "vco3_mclk", 0,
+ SPEAR1340_PLL3_CTR, SPEAR1340_PLL3_FRQ, pll_rtbl,
ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco3_clk", NULL);
clk_register_clkdev(clk1, "pll3_clk", NULL);
/* peripherals */
clk_register_fixed_factor(NULL, "thermal_clk", "osc_24m_clk", 0, 1,
128);
- clk = clk_register_gate(NULL, "thermal_gate_clk", "thermal_clk", 0,
+ clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_thermal");
clk_register_clkdev(clk, "ddr_clk", NULL);
/* clock derived from pll1 clk */
- clk = clk_register_frac("sys_synth_clk", "vco1div2_clk", 0,
+ clk = clk_register_frac("sys_syn_clk", "vco1div2_clk", 0,
SPEAR1340_SYS_CLK_SYNT, sys_synth_rtbl,
ARRAY_SIZE(sys_synth_rtbl), &_lock);
- clk_register_clkdev(clk, "sys_synth_clk", NULL);
+ clk_register_clkdev(clk, "sys_syn_clk", NULL);
- clk = clk_register_frac("amba_synth_clk", "vco1div2_clk", 0,
+ clk = clk_register_frac("amba_syn_clk", "vco1div2_clk", 0,
SPEAR1340_AMBA_CLK_SYNT, amba_synth_rtbl,
ARRAY_SIZE(amba_synth_rtbl), &_lock);
- clk_register_clkdev(clk, "amba_synth_clk", NULL);
+ clk_register_clkdev(clk, "amba_syn_clk", NULL);
- clk = clk_register_mux(NULL, "sys_mux_clk", sys_parents,
+ clk = clk_register_mux(NULL, "sys_mclk", sys_parents,
ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL,
SPEAR1340_SCLK_SRC_SEL_SHIFT,
SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock);
clk_register_clkdev(clk, "sys_clk", NULL);
- clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mux_clk", 0, 1,
+ clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mclk", 0, 1,
2);
clk_register_clkdev(clk, "cpu_clk", NULL);
clk_register_clkdev(clk, "apb_clk", NULL);
/* gpt clocks */
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT0_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt0_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt0_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt0_clk", "gpt0_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT1_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_GPT1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT2_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt_parents,
ARRAY_SIZE(gpt_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_GPT3_CLK_SHIFT, SPEAR1340_GPT_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_GPT3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* others */
- clk = clk_register_aux("uart0_synth_clk", "uart0_synth_gate_clk",
+ clk = clk_register_aux("uart0_syn_clk", "uart0_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_UART0_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart0_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart0_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "uart0_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart0_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0_clk", "uart0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "e0000000.serial");
- clk = clk_register_aux("uart1_synth_clk", "uart1_synth_gate_clk",
+ clk = clk_register_aux("uart1_syn_clk", "uart1_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_UART1_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart1_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart1_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "uart1_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart1_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart1_mux_clk", uart1_parents,
+ clk = clk_register_mux(NULL, "uart1_mclk", uart1_parents,
ARRAY_SIZE(uart1_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_UART1_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "uart1_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart1_mclk", NULL);
- clk = clk_register_gate(NULL, "uart1_clk", "uart1_mux_clk", 0,
- SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
+ clk = clk_register_gate(NULL, "uart1_clk", "uart1_mclk", 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_UART1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b4100000.serial");
- clk = clk_register_aux("sdhci_synth_clk", "sdhci_synth_gate_clk",
+ clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk",
"vco1div2_clk", 0, SPEAR1340_SDHCI_CLK_SYNT, NULL,
aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "sdhci_synth_clk", NULL);
- clk_register_clkdev(clk1, "sdhci_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "sdhci_syn_clk", NULL);
+ clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b3000000.sdhci");
- clk = clk_register_aux("cfxd_synth_clk", "cfxd_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1340_CFXD_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "cfxd_synth_clk", NULL);
- clk_register_clkdev(clk1, "cfxd_synth_gate_clk", NULL);
+ clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk",
+ 0, SPEAR1340_CFXD_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "cfxd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b2800000.cf");
clk_register_clkdev(clk, NULL, "arasan_xd");
- clk = clk_register_aux("c3_synth_clk", "c3_synth_gate_clk",
- "vco1div2_clk", 0, SPEAR1340_C3_CLK_SYNT, NULL,
- aux_rtbl, ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "c3_synth_clk", NULL);
- clk_register_clkdev(clk1, "c3_synth_gate_clk", NULL);
+ clk = clk_register_aux("c3_syn_clk", "c3_syn_gclk", "vco1div2_clk", 0,
+ SPEAR1340_C3_CLK_SYNT, NULL, aux_rtbl,
+ ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "c3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "c3_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "c3_mux_clk", c3_parents,
+ clk = clk_register_mux(NULL, "c3_mclk", c3_parents,
ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG,
SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "c3_mux_clk", NULL);
+ clk_register_clkdev(clk, "c3_mclk", NULL);
- clk = clk_register_gate(NULL, "c3_clk", "c3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "c3");
/* gmac */
- clk = clk_register_mux(NULL, "gmac_phy_input_mux_clk",
- gmac_phy_input_parents,
+ clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents,
ARRAY_SIZE(gmac_phy_input_parents), 0,
SPEAR1340_GMAC_CLK_CFG,
SPEAR1340_GMAC_PHY_INPUT_CLK_SHIFT,
SPEAR1340_GMAC_PHY_INPUT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gmac_phy_input_mux_clk", NULL);
+ clk_register_clkdev(clk, "phy_input_mclk", NULL);
- clk = clk_register_aux("gmac_phy_synth_clk", "gmac_phy_synth_gate_clk",
- "gmac_phy_input_mux_clk", 0, SPEAR1340_GMAC_CLK_SYNT,
- NULL, gmac_rtbl, ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gmac_phy_synth_clk", NULL);
- clk_register_clkdev(clk1, "gmac_phy_synth_gate_clk", NULL);
+ clk = clk_register_aux("phy_syn_clk", "phy_syn_gclk", "phy_input_mclk",
+ 0, SPEAR1340_GMAC_CLK_SYNT, NULL, gmac_rtbl,
+ ARRAY_SIZE(gmac_rtbl), &_lock, &clk1);
+ clk_register_clkdev(clk, "phy_syn_clk", NULL);
+ clk_register_clkdev(clk1, "phy_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "gmac_phy_mux_clk", gmac_phy_parents,
+ clk = clk_register_mux(NULL, "phy_mclk", gmac_phy_parents,
ARRAY_SIZE(gmac_phy_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT,
SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "stmmacphy.0");
/* clcd */
- clk = clk_register_mux(NULL, "clcd_synth_mux_clk", clcd_synth_parents,
+ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents,
ARRAY_SIZE(clcd_synth_parents), 0,
SPEAR1340_CLCD_CLK_SYNT, SPEAR1340_CLCD_SYNT_CLK_SHIFT,
SPEAR1340_CLCD_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_synth_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_mclk", NULL);
- clk = clk_register_frac("clcd_synth_clk", "clcd_synth_mux_clk", 0,
+ clk = clk_register_frac("clcd_syn_clk", "clcd_syn_mclk", 0,
SPEAR1340_CLCD_CLK_SYNT, clcd_rtbl,
ARRAY_SIZE(clcd_rtbl), &_lock);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
- clk = clk_register_mux(NULL, "clcd_pixel_mux_clk", clcd_pixel_parents,
+ clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents,
ARRAY_SIZE(clcd_pixel_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT,
SPEAR1340_CLCD_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "clcd_pixel_clk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, "clcd_clk", NULL);
/* i2s */
- clk = clk_register_mux(NULL, "i2s_src_mux_clk", i2s_src_parents,
+ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents,
ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG,
SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK,
0, &_lock);
clk_register_clkdev(clk, "i2s_src_clk", NULL);
- clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mux_clk", 0,
+ clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0,
SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl,
ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL);
clk_register_clkdev(clk, "i2s_prs1_clk", NULL);
- clk = clk_register_mux(NULL, "i2s_ref_mux_clk", i2s_ref_parents,
+ clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents,
ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG,
SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0,
&_lock);
clk_register_clkdev(clk, "i2s_ref_clk", NULL);
- clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mux_clk", 0,
+ clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL);
- clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gate_clk",
- "i2s_ref_mux_clk", 0, SPEAR1340_I2S_CLK_CFG,
- &i2s_sclk_masks, i2s_sclk_rtbl,
- ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1);
+ clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk", "i2s_ref_mclk",
+ 0, SPEAR1340_I2S_CLK_CFG, &i2s_sclk_masks,
+ i2s_sclk_rtbl, ARRAY_SIZE(i2s_sclk_rtbl), &_lock,
+ &clk1);
clk_register_clkdev(clk, "i2s_sclk_clk", NULL);
- clk_register_clkdev(clk1, "i2s_sclk_gate_clk", NULL);
+ clk_register_clkdev(clk1, "i2s_sclk_gclk", NULL);
/* clock derived from ahb clk */
clk = clk_register_gate(NULL, "i2c0_clk", "ahb_clk", 0,
clk_register_clkdev(clk, NULL, "e0280000.i2c");
clk = clk_register_gate(NULL, "i2c1_clk", "ahb_clk", 0,
- SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
+ SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_I2C1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "b4000000.i2c");
&_lock);
clk_register_clkdev(clk, "sysram1_clk", NULL);
- clk = clk_register_aux("adc_synth_clk", "adc_synth_gate_clk", "ahb_clk",
+ clk = clk_register_aux("adc_syn_clk", "adc_syn_gclk", "ahb_clk",
0, SPEAR1340_ADC_CLK_SYNT, NULL, adc_rtbl,
ARRAY_SIZE(adc_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "adc_synth_clk", NULL);
- clk_register_clkdev(clk1, "adc_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "adc_syn_clk", NULL);
+ clk_register_clkdev(clk1, "adc_syn_gclk", NULL);
- clk = clk_register_gate(NULL, "adc_clk", "adc_synth_gate_clk", 0,
+ clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0,
SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "adc_clk");
clk_register_clkdev(clk, NULL, "e0300000.kbd");
/* RAS clks */
- clk = clk_register_mux(NULL, "gen_synth0_1_mux_clk",
- gen_synth0_1_parents, ARRAY_SIZE(gen_synth0_1_parents),
- 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn0_1_mclk", gen_synth0_1_parents,
+ ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_GEN_SYNT0_1_CLK_SHIFT,
SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth0_1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_1_clk", NULL);
- clk = clk_register_mux(NULL, "gen_synth2_3_mux_clk",
- gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents),
- 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
+ clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents,
+ ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1340_PLL_CFG,
+ SPEAR1340_GEN_SYNT2_3_CLK_SHIFT,
SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gen_synth2_3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_3_clk", NULL);
- clk = clk_register_frac("gen_synth0_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0,
SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth0_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn0_clk", NULL);
- clk = clk_register_frac("gen_synth1_clk", "gen_synth0_1_clk", 0,
+ clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0,
SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth1_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn1_clk", NULL);
- clk = clk_register_frac("gen_synth2_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0,
SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth2_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn2_clk", NULL);
- clk = clk_register_frac("gen_synth3_clk", "gen_synth2_3_clk", 0,
+ clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0,
SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl),
&_lock);
- clk_register_clkdev(clk, "gen_synth3_clk", NULL);
+ clk_register_clkdev(clk, "gen_syn3_clk", NULL);
- clk = clk_register_gate(NULL, "mali_clk", "gen_synth3_clk", 0,
+ clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "mali");
&_lock);
clk_register_clkdev(clk, NULL, "spear_cec.1");
- clk = clk_register_mux(NULL, "spdif_out_mux_clk", spdif_out_parents,
+ clk = clk_register_mux(NULL, "spdif_out_mclk", spdif_out_parents,
ARRAY_SIZE(spdif_out_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT,
SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "spdif_out_mux_clk", NULL);
+ clk_register_clkdev(clk, "spdif_out_mclk", NULL);
- clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mux_clk", 0,
+ clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "spdif-out");
- clk = clk_register_mux(NULL, "spdif_in_mux_clk", spdif_in_parents,
+ clk = clk_register_mux(NULL, "spdif_in_mclk", spdif_in_parents,
ARRAY_SIZE(spdif_in_parents), 0,
SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT,
SPEAR1340_SPDIF_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "spdif_in_mux_clk", NULL);
+ clk_register_clkdev(clk, "spdif_in_mclk", NULL);
- clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mux_clk", 0,
+ clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spdif-in");
- clk = clk_register_gate(NULL, "acp_clk", "acp_mux_clk", 0,
+ clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "acp_clk");
- clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mux_clk", 0,
+ clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "plgpio");
- clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_dec");
- clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
0, &_lock);
clk_register_clkdev(clk, NULL, "video_enc");
- clk = clk_register_gate(NULL, "video_in_clk", "video_in_mux_clk", 0,
+ clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_vip");
- clk = clk_register_gate(NULL, "cam0_clk", "cam0_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.0");
- clk = clk_register_gate(NULL, "cam1_clk", "cam1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.1");
- clk = clk_register_gate(NULL, "cam2_clk", "cam2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.2");
- clk = clk_register_gate(NULL, "cam3_clk", "cam3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "spear_camif.3");
- clk = clk_register_gate(NULL, "pwm_clk", "pwm_mux_clk", 0,
+ clk = clk_register_gate(NULL, "pwm_clk", "pwm_mclk", 0,
SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0,
&_lock);
clk_register_clkdev(clk, NULL, "pwm");
};
/* clock parents */
-static const char *uart0_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
-static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
+static const char *uart0_parents[] = { "pll3_clk", "uart_syn_gclk", };
+static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk",
};
-static const char *gpt0_parents[] = { "pll3_48m_clk", "gpt0_synth_clk", };
-static const char *gpt1_parents[] = { "pll3_48m_clk", "gpt1_synth_clk", };
-static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
+static const char *gpt0_parents[] = { "pll3_clk", "gpt0_syn_clk", };
+static const char *gpt1_parents[] = { "pll3_clk", "gpt1_syn_clk", };
+static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", };
static const char *gen2_3_parents[] = { "pll1_clk", "pll2_clk", };
static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
"pll2_clk", };
{
struct clk *clk;
- clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_clk", 0,
1, 1);
clk_register_clkdev(clk, NULL, "60000000.clcd");
#define SPEAR320_UARTX_PCLK_VAL_SYNTH1 0x0
#define SPEAR320_UARTX_PCLK_VAL_APB 0x1
-static const char *i2s_ref_parents[] = { "ras_pll2_clk",
- "ras_gen2_synth_gate_clk", };
-static const char *sdhci_parents[] = { "ras_pll3_48m_clk",
- "ras_gen3_synth_gate_clk",
-};
+static const char *i2s_ref_parents[] = { "ras_pll2_clk", "ras_syn2_gclk", };
+static const char *sdhci_parents[] = { "ras_pll3_clk", "ras_syn3_gclk", };
static const char *smii0_parents[] = { "smii_125m_pad", "ras_pll2_clk",
- "ras_gen0_synth_gate_clk", };
-static const char *uartx_parents[] = { "ras_gen1_synth_gate_clk", "ras_apb_clk",
-};
+ "ras_syn0_gclk", };
+static const char *uartx_parents[] = { "ras_syn1_gclk", "ras_apb_clk", };
static void __init spear320_clk_init(void)
{
CLK_IS_ROOT, 125000000);
clk_register_clkdev(clk, "smii_125m_pad", NULL);
- clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_48m_clk", 0,
+ clk = clk_register_fixed_factor(NULL, "clcd_clk", "ras_pll3_clk", 0,
1, 1);
clk_register_clkdev(clk, NULL, "90000000.clcd");
clk_register_clkdev(clk, NULL, "fc900000.rtc");
/* clock derived from 24 MHz osc clk */
- clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0,
48000000);
- clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+ clk_register_clkdev(clk, "pll3_clk", NULL);
clk = clk_register_fixed_factor(NULL, "wdt_clk", "osc_24m_clk", 0, 1,
1);
HCLK_RATIO_MASK, 0, &_lock);
clk_register_clkdev(clk, "ahb_clk", NULL);
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0,
+ UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart0_mux_clk", uart0_parents,
+ clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents,
ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG,
UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "uart0_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart0_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0", "uart0_mux_clk", 0,
- PERIP1_CLK_ENB, UART_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart0", "uart0_mclk", 0, PERIP1_CLK_ENB,
+ UART_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0000000.serial");
- clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
- "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "firda_synth_clk", NULL);
- clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+ clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", 0,
+ FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_syn_clk", NULL);
+ clk_register_clkdev(clk1, "firda_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ clk = clk_register_mux(NULL, "firda_mclk", firda_parents,
ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "firda_mux_clk", NULL);
+ clk_register_clkdev(clk, "firda_mclk", NULL);
- clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0,
PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "firda");
/* gpt clocks */
- clk_register_gpt("gpt0_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk_register_gpt("gpt0_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents,
ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG,
GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk_register_gpt("gpt1_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt1_parents,
+ clk_register_gpt("gpt1_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt1_parents,
ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG,
GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
- gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, gpt_rtbl,
+ ARRAY_SIZE(gpt_rtbl), &_lock);
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents,
ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt2");
/* general synths clocks */
- clk = clk_register_aux("gen0_synth_clk", "gen0_synth_gate_clk",
- "pll1_clk", 0, GEN0_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen0_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen0_synth_gate_clk", NULL);
-
- clk = clk_register_aux("gen1_synth_clk", "gen1_synth_gate_clk",
- "pll1_clk", 0, GEN1_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen1_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen1_synth_gate_clk", NULL);
-
- clk = clk_register_mux(NULL, "gen2_3_parent_clk", gen2_3_parents,
+ clk = clk_register_aux("gen0_syn_clk", "gen0_syn_gclk", "pll1_clk",
+ 0, GEN0_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "gen0_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen0_syn_gclk", NULL);
+
+ clk = clk_register_aux("gen1_syn_clk", "gen1_syn_gclk", "pll1_clk",
+ 0, GEN1_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "gen1_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen1_syn_gclk", NULL);
+
+ clk = clk_register_mux(NULL, "gen2_3_par_clk", gen2_3_parents,
ARRAY_SIZE(gen2_3_parents), 0, CORE_CLK_CFG,
GEN_SYNTH2_3_CLK_SHIFT, GEN_SYNTH2_3_CLK_MASK, 0,
&_lock);
- clk_register_clkdev(clk, "gen2_3_parent_clk", NULL);
+ clk_register_clkdev(clk, "gen2_3_par_clk", NULL);
- clk = clk_register_aux("gen2_synth_clk", "gen2_synth_gate_clk",
- "gen2_3_parent_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
+ clk = clk_register_aux("gen2_syn_clk", "gen2_syn_gclk",
+ "gen2_3_par_clk", 0, GEN2_CLK_SYNT, NULL, aux_rtbl,
ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen2_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen2_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "gen2_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen2_syn_gclk", NULL);
- clk = clk_register_aux("gen3_synth_clk", "gen3_synth_gate_clk",
- "gen2_3_parent_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
+ clk = clk_register_aux("gen3_syn_clk", "gen3_syn_gclk",
+ "gen2_3_par_clk", 0, GEN3_CLK_SYNT, NULL, aux_rtbl,
ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "gen3_synth_clk", NULL);
- clk_register_clkdev(clk1, "gen3_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "gen3_syn_clk", NULL);
+ clk_register_clkdev(clk1, "gen3_syn_gclk", NULL);
/* clock derived from pll3 clk */
- clk = clk_register_gate(NULL, "usbh_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbh_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBH_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, "usbh_clk", NULL);
clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1,
1);
clk_register_clkdev(clk, "usbh.1_clk", NULL);
- clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "designware_udc");
/* clock derived from ahb clk */
RAS_CLK_ENB, RAS_PLL2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, "ras_pll2_clk", NULL);
- clk = clk_register_gate(NULL, "ras_pll3_48m_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "ras_pll3_clk", "pll3_clk", 0,
RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_pll3_48m_clk", NULL);
-
- clk = clk_register_gate(NULL, "ras_gen0_synth_gate_clk",
- "gen0_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT0_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen0_synth_gate_clk", NULL);
-
- clk = clk_register_gate(NULL, "ras_gen1_synth_gate_clk",
- "gen1_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT1_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen1_synth_gate_clk", NULL);
-
- clk = clk_register_gate(NULL, "ras_gen2_synth_gate_clk",
- "gen2_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT2_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen2_synth_gate_clk", NULL);
-
- clk = clk_register_gate(NULL, "ras_gen3_synth_gate_clk",
- "gen3_synth_gate_clk", 0, RAS_CLK_ENB,
- RAS_SYNT3_CLK_ENB, 0, &_lock);
- clk_register_clkdev(clk, "ras_gen3_synth_gate_clk", NULL);
+ clk_register_clkdev(clk, "ras_pll3_clk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn0_gclk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn1_gclk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn2_gclk", NULL);
+
+ clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", 0,
+ RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, &_lock);
+ clk_register_clkdev(clk, "ras_syn3_gclk", NULL);
if (of_machine_is_compatible("st,spear300"))
spear300_clk_init();
{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
};
-static const char *clcd_parents[] = { "pll3_48m_clk", "clcd_synth_gate_clk", };
-static const char *firda_parents[] = { "pll3_48m_clk", "firda_synth_gate_clk",
-};
-static const char *uart_parents[] = { "pll3_48m_clk", "uart_synth_gate_clk", };
-static const char *gpt0_1_parents[] = { "pll3_48m_clk", "gpt0_1_synth_clk", };
-static const char *gpt2_parents[] = { "pll3_48m_clk", "gpt2_synth_clk", };
-static const char *gpt3_parents[] = { "pll3_48m_clk", "gpt3_synth_clk", };
+static const char *clcd_parents[] = { "pll3_clk", "clcd_syn_gclk", };
+static const char *firda_parents[] = { "pll3_clk", "firda_syn_gclk", };
+static const char *uart_parents[] = { "pll3_clk", "uart_syn_gclk", };
+static const char *gpt0_1_parents[] = { "pll3_clk", "gpt0_1_syn_clk", };
+static const char *gpt2_parents[] = { "pll3_clk", "gpt2_syn_clk", };
+static const char *gpt3_parents[] = { "pll3_clk", "gpt3_syn_clk", };
static const char *ddr_parents[] = { "ahb_clk", "ahbmult2_clk", "none",
"pll2_clk", };
clk_register_clkdev(clk, NULL, "rtc-spear");
/* clock derived from 30 MHz osc clk */
- clk = clk_register_fixed_rate(NULL, "pll3_48m_clk", "osc_24m_clk", 0,
+ clk = clk_register_fixed_rate(NULL, "pll3_clk", "osc_24m_clk", 0,
48000000);
- clk_register_clkdev(clk, "pll3_48m_clk", NULL);
+ clk_register_clkdev(clk, "pll3_clk", NULL);
clk = clk_register_vco_pll("vco1_clk", "pll1_clk", NULL, "osc_30m_clk",
0, PLL1_CTR, PLL1_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
clk_register_clkdev(clk, "vco1_clk", NULL);
clk_register_clkdev(clk1, "pll1_clk", NULL);
- clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL,
- "osc_30m_clk", 0, PLL2_CTR, PLL2_FRQ, pll_rtbl,
- ARRAY_SIZE(pll_rtbl), &_lock, &clk1, NULL);
+ clk = clk_register_vco_pll("vco2_clk", "pll2_clk", NULL, "osc_30m_clk",
+ 0, PLL2_CTR, PLL2_FRQ, pll_rtbl, ARRAY_SIZE(pll_rtbl),
+ &_lock, &clk1, NULL);
clk_register_clkdev(clk, "vco2_clk", NULL);
clk_register_clkdev(clk1, "pll2_clk", NULL);
HCLK_RATIO_MASK, 0, &_lock);
clk_register_clkdev(clk, "ahb_clk", NULL);
- clk = clk_register_aux("uart_synth_clk", "uart_synth_gate_clk",
- "pll1_clk", 0, UART_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "uart_synth_clk", NULL);
- clk_register_clkdev(clk1, "uart_synth_gate_clk", NULL);
+ clk = clk_register_aux("uart_syn_clk", "uart_syn_gclk", "pll1_clk", 0,
+ UART_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "uart_syn_clk", NULL);
+ clk_register_clkdev(clk1, "uart_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "uart_mux_clk", uart_parents,
+ clk = clk_register_mux(NULL, "uart_mclk", uart_parents,
ARRAY_SIZE(uart_parents), 0, PERIP_CLK_CFG,
UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "uart_mux_clk", NULL);
+ clk_register_clkdev(clk, "uart_mclk", NULL);
- clk = clk_register_gate(NULL, "uart0", "uart_mux_clk", 0,
- PERIP1_CLK_ENB, UART0_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart0", "uart_mclk", 0, PERIP1_CLK_ENB,
+ UART0_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0000000.serial");
- clk = clk_register_gate(NULL, "uart1", "uart_mux_clk", 0,
- PERIP1_CLK_ENB, UART1_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "uart1", "uart_mclk", 0, PERIP1_CLK_ENB,
+ UART1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "d0080000.serial");
- clk = clk_register_aux("firda_synth_clk", "firda_synth_gate_clk",
- "pll1_clk", 0, FIRDA_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "firda_synth_clk", NULL);
- clk_register_clkdev(clk1, "firda_synth_gate_clk", NULL);
+ clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk",
+ 0, FIRDA_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "firda_syn_clk", NULL);
+ clk_register_clkdev(clk1, "firda_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "firda_mux_clk", firda_parents,
+ clk = clk_register_mux(NULL, "firda_mclk", firda_parents,
ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG,
FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "firda_mux_clk", NULL);
+ clk_register_clkdev(clk, "firda_mclk", NULL);
- clk = clk_register_gate(NULL, "firda_clk", "firda_mux_clk", 0,
+ clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0,
PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "firda");
- clk = clk_register_aux("clcd_synth_clk", "clcd_synth_gate_clk",
- "pll1_clk", 0, CLCD_CLK_SYNT, NULL, aux_rtbl,
- ARRAY_SIZE(aux_rtbl), &_lock, &clk1);
- clk_register_clkdev(clk, "clcd_synth_clk", NULL);
- clk_register_clkdev(clk1, "clcd_synth_gate_clk", NULL);
+ clk = clk_register_aux("clcd_syn_clk", "clcd_syn_gclk", "pll1_clk",
+ 0, CLCD_CLK_SYNT, NULL, aux_rtbl, ARRAY_SIZE(aux_rtbl),
+ &_lock, &clk1);
+ clk_register_clkdev(clk, "clcd_syn_clk", NULL);
+ clk_register_clkdev(clk1, "clcd_syn_gclk", NULL);
- clk = clk_register_mux(NULL, "clcd_mux_clk", clcd_parents,
+ clk = clk_register_mux(NULL, "clcd_mclk", clcd_parents,
ARRAY_SIZE(clcd_parents), 0, PERIP_CLK_CFG,
CLCD_CLK_SHIFT, CLCD_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "clcd_mux_clk", NULL);
+ clk_register_clkdev(clk, "clcd_mclk", NULL);
- clk = clk_register_gate(NULL, "clcd_clk", "clcd_mux_clk", 0,
+ clk = clk_register_gate(NULL, "clcd_clk", "clcd_mclk", 0,
PERIP1_CLK_ENB, CLCD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "clcd");
/* gpt clocks */
- clk = clk_register_gpt("gpt0_1_synth_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
+ clk = clk_register_gpt("gpt0_1_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt0_1_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt0_1_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt0_mux_clk", gpt0_1_parents,
+ clk = clk_register_mux(NULL, "gpt0_mclk", gpt0_1_parents,
ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt0");
- clk = clk_register_mux(NULL, "gpt1_mux_clk", gpt0_1_parents,
+ clk = clk_register_mux(NULL, "gpt1_mclk", gpt0_1_parents,
ARRAY_SIZE(gpt0_1_parents), 0, PERIP_CLK_CFG,
GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt1_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt1_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0,
PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt1");
- clk = clk_register_gpt("gpt2_synth_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
+ clk = clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt2_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt2_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt2_mux_clk", gpt2_parents,
+ clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents,
ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG,
GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt2_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt2_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0,
PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt2");
- clk = clk_register_gpt("gpt3_synth_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
+ clk = clk_register_gpt("gpt3_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG,
gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock);
- clk_register_clkdev(clk, "gpt3_synth_clk", NULL);
+ clk_register_clkdev(clk, "gpt3_syn_clk", NULL);
- clk = clk_register_mux(NULL, "gpt3_mux_clk", gpt3_parents,
+ clk = clk_register_mux(NULL, "gpt3_mclk", gpt3_parents,
ARRAY_SIZE(gpt3_parents), 0, PERIP_CLK_CFG,
GPT3_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock);
- clk_register_clkdev(clk, "gpt3_mux_clk", NULL);
+ clk_register_clkdev(clk, "gpt3_mclk", NULL);
- clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mux_clk", 0,
+ clk = clk_register_gate(NULL, "gpt3_clk", "gpt3_mclk", 0,
PERIP1_CLK_ENB, GPT3_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "gpt3");
/* clock derived from pll3 clk */
- clk = clk_register_gate(NULL, "usbh0_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "usbh0_clk", "pll3_clk", 0,
PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "usbh.0_clk");
- clk = clk_register_gate(NULL, "usbh1_clk", "pll3_48m_clk", 0,
+ clk = clk_register_gate(NULL, "usbh1_clk", "pll3_clk", 0,
PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "usbh.1_clk");
- clk = clk_register_gate(NULL, "usbd_clk", "pll3_48m_clk", 0,
- PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock);
+ clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB,
+ USBD_CLK_ENB, 0, &_lock);
clk_register_clkdev(clk, NULL, "designware_udc");
/* clock derived from ahb clk */
clk_register_clkdev(clk, "ahbmult2_clk", NULL);
clk = clk_register_mux(NULL, "ddr_clk", ddr_parents,
- ARRAY_SIZE(ddr_parents),
- 0, PLL_CLK_CFG, MCTR_CLK_SHIFT, MCTR_CLK_MASK, 0,
- &_lock);
+ ARRAY_SIZE(ddr_parents), 0, PLL_CLK_CFG, MCTR_CLK_SHIFT,
+ MCTR_CLK_MASK, 0, &_lock);
clk_register_clkdev(clk, "ddr_clk", NULL);
clk = clk_register_divider(NULL, "apb_clk", "ahb_clk",
config GPIO_MSM_V1
tristate "Qualcomm MSM GPIO v1"
- depends on GPIOLIB && ARCH_MSM
+ depends on GPIOLIB && ARCH_MSM && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
help
Say yes here to support the GPIO interface on ARM v6 based
Qualcomm MSM chips. Most of the pins on the MSM can be
return 0;
}
+EXPORT_SYMBOL(devm_gpio_request_one);
/**
* devm_gpio_free - free an interrupt
writel(~0, port->base + GPIO_ISR);
if (mxc_gpio_hwtype == IMX21_GPIO) {
- /* setup one handler for all GPIO interrupts */
- if (pdev->id == 0)
- irq_set_chained_handler(port->irq,
- mx2_gpio_irq_handler);
+ /*
+ * Setup one handler for all GPIO interrupts. Actually setting
+ * the handler is needed only once, but doing it for every port
+ * is more robust and easier.
+ */
+ irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
} else {
/* setup one handler for each entry */
irq_set_chained_handler(port->irq, mx3_gpio_irq_handler);
if (bank->dbck_enable_mask && !bank->dbck_enabled) {
clk_enable(bank->dbck);
bank->dbck_enabled = true;
+
+ __raw_writel(bank->dbck_enable_mask,
+ bank->base + bank->regs->debounce_en);
}
}
static inline void _gpio_dbck_disable(struct gpio_bank *bank)
{
if (bank->dbck_enable_mask && bank->dbck_enabled) {
+ /*
+ * Disable debounce before cutting it's clock. If debounce is
+ * enabled but the clock is not, GPIO module seems to be unable
+ * to detect events and generate interrupts at least on OMAP3.
+ */
+ __raw_writel(0, bank->base + bank->regs->debounce_en);
+
clk_disable(bank->dbck);
bank->dbck_enabled = false;
}
bank->is_mpuio = pdata->is_mpuio;
bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
bank->loses_context = pdata->loses_context;
- bank->get_context_loss_count = pdata->get_context_loss_count;
bank->regs = pdata->regs;
#ifdef CONFIG_OF_GPIO
bank->chip.of_node = of_node_get(node);
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
+ if (bank->loses_context)
+ bank->get_context_loss_count = pdata->get_context_loss_count;
+
pm_runtime_put(bank->dev);
list_add_tail(&bank->node, &omap_gpio_list);
}
spin_lock_init(&chip->lock);
gsta_gpio_setup(chip);
- for (i = 0; i < GSTA_NR_GPIO; i++)
- gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
+ if (gpio_pdata)
+ for (i = 0; i < GSTA_NR_GPIO; i++)
+ gsta_set_config(chip, i, gpio_pdata->pinconfig[i]);
/* 384 was used in previous code: be compatible for other drivers */
err = irq_alloc_descs(-1, 384, GSTA_NR_GPIO, NUMA_NO_NODE);
tps65910_gpio->gpio_chip.set = tps65910_gpio_set;
tps65910_gpio->gpio_chip.get = tps65910_gpio_get;
tps65910_gpio->gpio_chip.dev = &pdev->dev;
+#ifdef CONFIG_OF_GPIO
+ tps65910_gpio->gpio_chip.of_node = tps65910->dev->of_node;
+#endif
if (pdata && pdata->gpio_base)
tps65910_gpio->gpio_chip.base = pdata->gpio_base;
else
struct wm8994_gpio *wm8994_gpio = to_wm8994_gpio(chip);
struct wm8994 *wm8994 = wm8994_gpio->wm8994;
+ if (value)
+ value = WM8994_GPN_LVL;
+
return wm8994_set_bits(wm8994, WM8994_GPIO_1 + offset,
- WM8994_GPN_DIR, 0);
+ WM8994_GPN_DIR | WM8994_GPN_LVL, value);
}
static void wm8994_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE;
}
-static int cdv_get_brightness(struct backlight_device *bd)
-{
- struct drm_device *dev = bl_get_data(bd);
- u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
-
- if (cdv_backlight_combination_mode(dev)) {
- u8 lbpc;
-
- val &= ~1;
- pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
- val *= lbpc;
- }
- return val;
-}
-
static u32 cdv_get_max_backlight(struct drm_device *dev)
{
u32 max = REG_READ(BLC_PWM_CTL);
return max;
}
+static int cdv_get_brightness(struct backlight_device *bd)
+{
+ struct drm_device *dev = bl_get_data(bd);
+ u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
+
+ if (cdv_backlight_combination_mode(dev)) {
+ u8 lbpc;
+
+ val &= ~1;
+ pci_read_config_byte(dev->pdev, 0xF4, &lbpc);
+ val *= lbpc;
+ }
+ return (val * 100)/cdv_get_max_backlight(dev);
+
+}
+
static int cdv_set_brightness(struct backlight_device *bd)
{
struct drm_device *dev = bl_get_data(bd);
if (level < 1)
level = 1;
+ level *= cdv_get_max_backlight(dev);
+ level /= 100;
+
if (cdv_backlight_combination_mode(dev)) {
u32 max = cdv_get_max_backlight(dev);
u8 lbpc;
cdv_backlight_device->props.brightness =
cdv_get_brightness(cdv_backlight_device);
- cdv_backlight_device->props.max_brightness = cdv_get_max_backlight(dev);
backlight_update_status(cdv_backlight_device);
dev_priv->backlight_device = cdv_backlight_device;
return 0;
#define ASLE_CBLV_VALID (1<<31)
+static struct psb_intel_opregion *system_opregion;
+
static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
{
struct drm_psb_private *dev_priv = dev->dev_private;
struct drm_psb_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
- if (asle) {
+ if (asle && system_opregion ) {
/* Don't do this on Medfield or other non PC like devices, they
use the bit for something different altogether */
psb_enable_pipestat(dev_priv, 0, PIPE_LEGACY_BLC_EVENT_ENABLE);
#define ACPI_EV_LID (1<<1)
#define ACPI_EV_DOCK (1<<2)
-static struct psb_intel_opregion *system_opregion;
static int psb_intel_opregion_video_event(struct notifier_block *nb,
unsigned long val, void *data)
system_opregion = opregion;
register_acpi_notifier(&psb_intel_opregion_notifier);
}
-
- if (opregion->asle)
- psb_intel_opregion_enable_asle(dev);
}
void psb_intel_opregion_fini(struct drm_device *dev)
extern void psb_intel_opregion_init(struct drm_device *dev);
extern void psb_intel_opregion_fini(struct drm_device *dev);
extern int psb_intel_opregion_setup(struct drm_device *dev);
+extern void psb_intel_opregion_enable_asle(struct drm_device *dev);
#else
{
return 0;
}
+
+extern inline void psb_intel_opregion_enable_asle(struct drm_device *dev)
+{
+}
#endif
psb_backlight_device->props.max_brightness = 100;
backlight_update_status(psb_backlight_device);
dev_priv->backlight_device = psb_backlight_device;
+
+ /* This must occur after the backlight is properly initialised */
+ psb_lid_timer_init(dev_priv);
+
return 0;
}
return 0;
}
-/* Not exactly an erratum more an irritation */
-static void psb_chip_errata(struct drm_device *dev)
-{
- struct drm_psb_private *dev_priv = dev->dev_private;
- psb_lid_timer_init(dev_priv);
-}
-
static void psb_chip_teardown(struct drm_device *dev)
{
struct drm_psb_private *dev_priv = dev->dev_private;
.sgx_offset = PSB_SGX_OFFSET,
.chip_setup = psb_chip_setup,
.chip_teardown = psb_chip_teardown,
- .errata = psb_chip_errata,
.crtc_helper = &psb_intel_helper_funcs,
.crtc_funcs = &psb_intel_crtc_funcs,
if (ret)
return ret;
+ psb_intel_opregion_enable_asle(dev);
#if 0
/*enable runtime pm at last*/
pm_runtime_enable(&dev->pdev->dev);
- Unitec Panels
- XAT optical touch panels
- Xiroku optical touch panels
+ - Zytronic touch panels
If unsure, say N.
.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+ .driver_data = APPLE_HAS_FN },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+ .driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
+ .driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MCT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_ISO) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7_JIS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
{ }
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c
#define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d
#define USB_DEVICE_ID_APPLE_WELLSPRING6_JIS 0x024e
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI 0x0239
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO 0x023a
#define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS 0x023b
#define USB_DEVICE_ID_CRYSTALTOUCH 0x0006
#define USB_DEVICE_ID_CRYSTALTOUCH_DUAL 0x0007
+#define USB_VENDOR_ID_MADCATZ 0x0738
+#define USB_DEVICE_ID_MADCATZ_BEATPAD 0x4540
+
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
#define USB_DEVICE_ID_MCC_PMD1208LS 0x007a
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
#define USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE 0x0600
+#define USB_VENDOR_ID_SENNHEISER 0x1395
+#define USB_DEVICE_ID_SENNHEISER_BTD500USB 0x002c
+
#define USB_VENDOR_ID_SIGMA_MICRO 0x1c4f
#define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD 0x0002
#define USB_VENDOR_ID_ZYDACRON 0x13EC
#define USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL 0x0006
+#define USB_VENDOR_ID_ZYTRONIC 0x14c8
+#define USB_DEVICE_ID_ZYTRONIC_ZXY100 0x0005
+
#define USB_VENDOR_ID_PRIMAX 0x0461
#define USB_DEVICE_ID_PRIMAX_KEYBOARD 0x4e05
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
+ { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+ USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI),
+ HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
{}
};
MT_USB_DEVICE(USB_VENDOR_ID_XIROKU,
USB_DEVICE_ID_XIROKU_CSR2) },
+ /* Zytronic panels */
+ { .driver_data = MT_CLS_SERIAL,
+ MT_USB_DEVICE(USB_VENDOR_ID_ZYTRONIC,
+ USB_DEVICE_ID_ZYTRONIC_ZXY100) },
+
/* Generic MT device */
{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH, HID_ANY_ID, HID_ANY_ID) },
{ }
{ USB_VENDOR_ID_PRODIGE, USB_DEVICE_ID_PRODIGE_CORDLESS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_PIXART_IMAGING_INC_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET },
/* Start monitoring */
it87_write_value(data, IT87_REG_CONFIG,
- (it87_read_value(data, IT87_REG_CONFIG) & 0x36)
+ (it87_read_value(data, IT87_REG_CONFIG) & 0x3e)
| (update_vbat ? 0x41 : 0x01));
}
spin_lock_init(&hwlock->lock);
hwlock->bank = bank;
- ret = hwspin_lock_register_single(hwlock, i);
+ ret = hwspin_lock_register_single(hwlock, base_id + i);
if (ret)
goto reg_failed;
}
reg_failed:
while (--i >= 0)
- hwspin_lock_unregister_single(i);
+ hwspin_lock_unregister_single(base_id + i);
return ret;
}
EXPORT_SYMBOL_GPL(hwspin_lock_register);
skb_frag_size_set(frag, size);
skb->data_len += size;
- skb->truesize += size;
+ skb->truesize += PAGE_SIZE;
} else
skb_put(skb, length);
struct ipoib_dev_priv *priv = netdev_priv(dev);
struct sk_buff *skb;
int buf_size;
+ int tailroom;
u64 *mapping;
- if (ipoib_ud_need_sg(priv->max_ib_mtu))
+ if (ipoib_ud_need_sg(priv->max_ib_mtu)) {
buf_size = IPOIB_UD_HEAD_SIZE;
- else
+ tailroom = 128; /* reserve some tailroom for IP/TCP headers */
+ } else {
buf_size = IPOIB_UD_BUF_SIZE(priv->max_ib_mtu);
+ tailroom = 0;
+ }
- skb = dev_alloc_skb(buf_size + 4);
+ skb = dev_alloc_skb(buf_size + tailroom + 4);
if (unlikely(!skb))
return NULL;
{ 0x0c12, 0x880a, "Pelican Eclipse PL-2023", 0, XTYPE_XBOX },
{ 0x0c12, 0x8810, "Zeroplus Xbox Controller", 0, XTYPE_XBOX },
{ 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", 0, XTYPE_XBOX },
+ { 0x0d2f, 0x0002, "Andamiro Pump It Up pad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x0e4c, 0x1097, "Radica Gamester Controller", 0, XTYPE_XBOX },
{ 0x0e4c, 0x2390, "Radica Games Jtech Controller", 0, XTYPE_XBOX },
{ 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", 0, XTYPE_XBOX },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x0016, "Hori Real Arcade Pro.EX", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
{ 0x0f0d, 0x000d, "Hori Fighting Stick EX2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
+ { 0x1689, 0xfd00, "Razer Onza Tournament Edition", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", 0, XTYPE_XBOX },
{ 0x0000, 0x0000, "Generic X-Box pad", 0, XTYPE_UNKNOWN }
};
XPAD_XBOX360_VENDOR(0x045e), /* Microsoft X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
+ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Harminix Rock Band Guitar and Drums */
- XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x0f0d), /* Hori Controllers */
+ XPAD_XBOX360_VENDOR(0x1689), /* Razer Onza */
{ }
};
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI 0x0252
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO 0x0253
#define USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS 0x0254
+/* MacbookPro10,1 (unibody, June 2012) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI 0x0262
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_ISO 0x0263
+#define USB_DEVICE_ID_APPLE_WELLSPRING7_JIS 0x0264
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5A_JIS),
+ /* MacbookPro10,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7_JIS),
/* Terminating entry */
{}
};
{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING7_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING7_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING7_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4750, 5280 },
+ { DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
+ },
{}
};
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/jornada720.h>
static ATOMIC_NOTIFIER_HEAD(ppr_notifier);
int amd_iommu_max_glx_val = -1;
+static struct dma_map_ops amd_iommu_dma_ops;
+
/*
* general struct to manage commands send to an IOMMU
*/
return;
de_fflush = debugfs_create_bool("fullflush", 0444, stats_dir,
- (u32 *)&amd_iommu_unmap_flush);
+ &amd_iommu_unmap_flush);
amd_iommu_stats_add(&compl_wait);
amd_iommu_stats_add(&cnt_map_single);
list_add_tail(&dma_domain->list, &iommu_pd_list);
spin_unlock_irqrestore(&iommu_pd_list_lock, flags);
+ dev_data = get_dev_data(dev);
+
+ if (!dev_data->passthrough)
+ dev->archdata.dma_ops = &amd_iommu_dma_ops;
+ else
+ dev->archdata.dma_ops = &nommu_dma_ops;
+
break;
case BUS_NOTIFY_DEL_DEVICE:
to handle */
LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
we find in ACPI */
-bool amd_iommu_unmap_flush; /* if true, flush on every unmap */
+u32 amd_iommu_unmap_flush; /* if true, flush on every unmap */
LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
system */
amd_iommu_init_api();
+ x86_platform.iommu_shutdown = disable_iommus;
+
if (iommu_pass_through)
goto out;
else
printk(KERN_INFO "AMD-Vi: Lazy IO/TLB flushing enabled\n");
- x86_platform.iommu_shutdown = disable_iommus;
-
out:
return ret;
* If true, the addresses will be flushed on unmap time, not when
* they are reused
*/
-extern bool amd_iommu_unmap_flush;
+extern u32 amd_iommu_unmap_flush;
/* Smallest number of PASIDs supported by any IOMMU in the system */
extern u32 amd_iommu_max_pasids;
return 0;
as->pte_count = devm_kzalloc(smmu->dev,
- sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_KERNEL);
+ sizeof(as->pte_count[0]) * SMMU_PDIR_COUNT, GFP_ATOMIC);
if (!as->pte_count) {
dev_err(smmu->dev,
"failed to allocate smmu_device PTE cunters\n");
return -ENOMEM;
}
- as->pdir_page = alloc_page(GFP_KERNEL | __GFP_DMA);
+ as->pdir_page = alloc_page(GFP_ATOMIC | __GFP_DMA);
if (!as->pdir_page) {
dev_err(smmu->dev,
"failed to allocate smmu_device page directory\n");
skb = NULL;
else if (*debug & DEBUG_SEND_ERR)
printk(KERN_DEBUG
- "%s ch%d mgr prim(%x) addr(%x) err %d\n",
- __func__, ch->nr, hh->prim, ch->addr, ret);
+ "%s mgr prim(%x) err %d\n",
+ __func__, hh->prim, ret);
}
out:
mutex_unlock(&st->lmutex);
ti->split_io = dm_rh_get_region_size(ms->rh);
ti->num_flush_requests = 1;
ti->num_discard_requests = 1;
+ ti->discard_zeroes_data_unsupported = 1;
ms->kmirrord_wq = alloc_workqueue("kmirrord",
WQ_NON_REENTRANT | WQ_MEM_RECLAIM, 0);
* We need to dec pending if this was a write.
*/
if (rw == WRITE) {
- if (!(bio->bi_rw & REQ_FLUSH))
+ if (!(bio->bi_rw & (REQ_FLUSH | REQ_DISCARD)))
dm_rh_dec(ms->rh, map_context->ll);
return error;
}
return;
}
+ if (bio->bi_rw & REQ_DISCARD)
+ return;
+
/* We must inform the log that the sync count has changed. */
log->type->set_region_sync(log, region, 0);
struct bio *bio;
for (bio = bios->head; bio; bio = bio->bi_next) {
- if (bio->bi_rw & REQ_FLUSH)
+ if (bio->bi_rw & (REQ_FLUSH | REQ_DISCARD))
continue;
rh_inc(rh, dm_rh_bio_to_region(rh, bio));
}
cell_release_singleton(cell, bio);
cell_release_singleton(cell2, bio);
- remap_and_issue(tc, bio, lookup_result.block);
+ if ((!lookup_result.shared) && pool->pf.discard_passdown)
+ remap_and_issue(tc, bio, lookup_result.block);
+ else
+ bio_endio(bio, 0);
}
break;
if (tc->pool->pf.discard_enabled) {
ti->discards_supported = 1;
ti->num_discard_requests = 1;
+ ti->discard_zeroes_data_unsupported = 1;
}
dm_put(pool_md);
* can be sane */
return -EBUSY;
rdev->data_offset = offset;
+ rdev->new_data_offset = offset;
return len;
}
return sprintf(page, "%s\n", array_states[st]);
}
-static int do_md_stop(struct mddev * mddev, int ro, int is_open);
-static int md_set_readonly(struct mddev * mddev, int is_open);
+static int do_md_stop(struct mddev * mddev, int ro, struct block_device *bdev);
+static int md_set_readonly(struct mddev * mddev, struct block_device *bdev);
static int do_md_run(struct mddev * mddev);
static int restart_array(struct mddev *mddev);
/* stopping an active array */
if (atomic_read(&mddev->openers) > 0)
return -EBUSY;
- err = do_md_stop(mddev, 0, 0);
+ err = do_md_stop(mddev, 0, NULL);
break;
case inactive:
/* stopping an active array */
if (mddev->pers) {
if (atomic_read(&mddev->openers) > 0)
return -EBUSY;
- err = do_md_stop(mddev, 2, 0);
+ err = do_md_stop(mddev, 2, NULL);
} else
err = 0; /* already inactive */
break;
break; /* not supported yet */
case readonly:
if (mddev->pers)
- err = md_set_readonly(mddev, 0);
+ err = md_set_readonly(mddev, NULL);
else {
mddev->ro = 1;
set_disk_ro(mddev->gendisk, 1);
case read_auto:
if (mddev->pers) {
if (mddev->ro == 0)
- err = md_set_readonly(mddev, 0);
+ err = md_set_readonly(mddev, NULL);
else if (mddev->ro == 1)
err = restart_array(mddev);
if (err == 0) {
}
EXPORT_SYMBOL_GPL(md_stop);
-static int md_set_readonly(struct mddev *mddev, int is_open)
+static int md_set_readonly(struct mddev *mddev, struct block_device *bdev)
{
int err = 0;
mutex_lock(&mddev->open_mutex);
- if (atomic_read(&mddev->openers) > is_open) {
+ if (atomic_read(&mddev->openers) > !!bdev) {
printk("md: %s still in use.\n",mdname(mddev));
err = -EBUSY;
goto out;
}
+ if (bdev)
+ sync_blockdev(bdev);
if (mddev->pers) {
__md_stop_writes(mddev);
* 0 - completely stop and dis-assemble array
* 2 - stop but do not disassemble array
*/
-static int do_md_stop(struct mddev * mddev, int mode, int is_open)
+static int do_md_stop(struct mddev * mddev, int mode,
+ struct block_device *bdev)
{
struct gendisk *disk = mddev->gendisk;
struct md_rdev *rdev;
mutex_lock(&mddev->open_mutex);
- if (atomic_read(&mddev->openers) > is_open ||
+ if (atomic_read(&mddev->openers) > !!bdev ||
mddev->sysfs_active) {
printk("md: %s still in use.\n",mdname(mddev));
mutex_unlock(&mddev->open_mutex);
return -EBUSY;
}
+ if (bdev)
+ /* It is possible IO was issued on some other
+ * open file which was closed before we took ->open_mutex.
+ * As that was not the last close __blkdev_put will not
+ * have called sync_blockdev, so we must.
+ */
+ sync_blockdev(bdev);
if (mddev->pers) {
if (mddev->ro)
err = do_md_run(mddev);
if (err) {
printk(KERN_WARNING "md: do_md_run() returned %d\n", err);
- do_md_stop(mddev, 0, 0);
+ do_md_stop(mddev, 0, NULL);
}
}
goto done_unlock;
case STOP_ARRAY:
- err = do_md_stop(mddev, 0, 1);
+ err = do_md_stop(mddev, 0, bdev);
goto done_unlock;
case STOP_ARRAY_RO:
- err = md_set_readonly(mddev, 1);
+ err = md_set_readonly(mddev, bdev);
goto done_unlock;
case BLKROSET:
if (atomic_dec_and_test(&r1_bio->remaining)) {
/* if we're here, all write(s) have completed, so clean up */
- md_done_sync(mddev, r1_bio->sectors, 1);
- put_buf(r1_bio);
+ int s = r1_bio->sectors;
+ if (test_bit(R1BIO_MadeGood, &r1_bio->state) ||
+ test_bit(R1BIO_WriteError, &r1_bio->state))
+ reschedule_retry(r1_bio);
+ else {
+ put_buf(r1_bio);
+ md_done_sync(mddev, s, 1);
+ }
}
}
*/
if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) {
atomic_set(&r1_bio->remaining, read_targets);
- for (i = 0; i < conf->raid_disks * 2; i++) {
+ for (i = 0; i < conf->raid_disks * 2 && read_targets; i++) {
bio = r1_bio->bios[i];
if (bio->bi_end_io == end_sync_read) {
+ read_targets--;
md_sync_acct(bio->bi_bdev, nr_sectors);
generic_make_request(bio);
}
if (minor == MAX_DVB_MINORS) {
kfree(dvbdevfops);
kfree(dvbdev);
+ up_write(&minor_rwsem);
mutex_unlock(&dvbdev_register_lock);
return -EINVAL;
}
static bool txandrx; /* default = 0 */
module_param(txandrx, bool, 0444);
-MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX");
+MODULE_PARM_DESC(txandrx, "Allow simultaneous TX and RX");
static unsigned int wake_sc = 0x800F040C;
module_param(wake_sc, uint, 0644);
data->dev->tx_ir = wbcir_tx;
data->dev->priv = data;
data->dev->dev.parent = &device->dev;
+ data->dev->timeout = MS_TO_NS(100);
+ data->dev->allowed_protos = RC_TYPE_ALL;
if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {
dev_err(dev, "Region 0x%lx-0x%lx already in use!\n",
urb->context = dev;
urb->pipe = usb_rcvisocpipe(dev->udev,
dev->adev.end_point_addr);
- urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = URB_ISO_ASAP;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->interval = 1;
urb->complete = cx231xx_audio_isocirq;
urb->context = dev;
urb->pipe = usb_rcvbulkpipe(dev->udev,
dev->adev.end_point_addr);
- urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = 0;
urb->transfer_buffer = dev->adev.transfer_buffer[i];
urb->complete = cx231xx_audio_bulkirq;
urb->transfer_buffer_length = sb_size;
return -ENOMEM;
}
dev->vbi_mode.bulk_ctl.urb[i] = urb;
- urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
+ urb->transfer_flags = 0;
dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
kzalloc(sb_size, GFP_KERNEL);
},
[CX23885_BOARD_HAUPPAUGE_HVR1250] = {
.name = "Hauppauge WinTV-HVR1250",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
+ .tuner_type = TUNER_PHILIPS_TDA8290,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .tuner_bus = 1,
+#endif
+ .force_bff = 1,
.input = {{
+#ifdef MT2131_NO_ANALOG_SUPPORT_YET
.type = CX23885_VMUX_TELEVISION,
- .vmux = 0,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1,
+ .amux = CX25840_AUDIO8,
.gpio0 = 0xff00,
}, {
- .type = CX23885_VMUX_DEBUG,
- .vmux = 0,
- .gpio0 = 0xff01,
- }, {
+#endif
.type = CX23885_VMUX_COMPOSITE1,
- .vmux = 1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
}, {
.type = CX23885_VMUX_SVIDEO,
- .vmux = 2,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
.gpio0 = 0xff02,
} },
},
},
[CX23885_BOARD_HAUPPAUGE_HVR1255] = {
.name = "Hauppauge WinTV-HVR1255",
+ .porta = CX23885_ANALOG_VIDEO,
+ .portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1 |
+ CX25840_DIF_ON,
+ .amux = CX25840_AUDIO8,
+ }, {
+ .type = CX23885_VMUX_COMPOSITE1,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN6_CH1,
+ .amux = CX25840_AUDIO7,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
+ },
+ [CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = {
+ .name = "Hauppauge WinTV-HVR1255",
+ .porta = CX23885_ANALOG_VIDEO,
.portc = CX23885_MPEG_DVB,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = 0x42, /* 0x84 >> 1 */
+ .force_bff = 1,
+ .input = {{
+ .type = CX23885_VMUX_TELEVISION,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN5_CH2 |
+ CX25840_VIN2_CH1 |
+ CX25840_DIF_ON,
+ .amux = CX25840_AUDIO8,
+ }, {
+ .type = CX23885_VMUX_SVIDEO,
+ .vmux = CX25840_VIN7_CH3 |
+ CX25840_VIN4_CH2 |
+ CX25840_VIN8_CH1 |
+ CX25840_SVIDEO_ON,
+ .amux = CX25840_AUDIO7,
+ } },
},
[CX23885_BOARD_HAUPPAUGE_HVR1210] = {
.name = "Hauppauge WinTV-HVR1210",
}, {
.subvendor = 0x0070,
.subdevice = 0x2259,
- .card = CX23885_BOARD_HAUPPAUGE_HVR1255,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1255_22111,
}, {
.subvendor = 0x0070,
.subdevice = 0x2291,
struct cx23885_dev *dev = port->dev;
u32 bitmask = 0;
- if (command == XC2028_RESET_CLK)
+ if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH))
return 0;
if (command != 0) {
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */
/* GPIO-6 I2C Gate which can isolate the demod from the bus */
case CX23885_BOARD_HAUPPAUGE_HVR1400:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
/* FIXME: Implement me */
break;
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1275:
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
*/
switch (dev->board) {
case CX23885_BOARD_TEVII_S470:
- case CX23885_BOARD_HAUPPAUGE_HVR1250:
/* Currently only enabled for the integrated IR controller */
if (!enable_885_ir)
break;
+ case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1800:
case CX23885_BOARD_HAUPPAUGE_HVR1800lp:
case CX23885_BOARD_HAUPPAUGE_HVR1700:
case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1270:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_MYGICA_X8506:
}
break;
case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
i2c_bus = &dev->i2c_bus[0];
fe0->dvb.frontend = dvb_attach(s5h1411_attach,
&hcw_s5h1411_config,
0x60, &dev->i2c_bus[1].i2c_adap,
&hauppauge_tda18271_config);
}
+
+ tda18271_attach(&dev->ts1.analog_fe,
+ 0x60, &dev->i2c_bus[1].i2c_adap,
+ &hauppauge_tda18271_config);
+
break;
case CX23885_BOARD_HAUPPAUGE_HVR1800:
i2c_bus = &dev->i2c_bus[0];
if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) ||
(dev->board == CX23885_BOARD_MPX885) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) ||
(dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) {
/* Configure audio routing */
v4l2_subdev_call(dev->sd_cx25840, audio, s_routing,
fe = vfe->dvb.frontend;
- if (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)
+ if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) ||
+ (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111))
fe = &dev->ts1.analog_fe;
if (fe && fe->ops.tuner_ops.set_analog_params) {
int ret;
switch (dev->board) {
+ case CX23885_BOARD_HAUPPAUGE_HVR1255:
+ case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1850:
ret = cx23885_set_freq_via_ops(dev, f);
break;
#define CX23885_BOARD_MYGICA_X8507 33
#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34
#define CX23885_BOARD_TEVII_S471 35
+#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
list_add_tail(&dev->devlist, &cx25821_devlist);
mutex_unlock(&cx25821_devlist_mutex);
- strcpy(cx25821_boards[UNKNOWN_BOARD].name, "unknown");
- strcpy(cx25821_boards[CX25821_BOARD].name, "cx25821");
-
if (dev->pci->device != 0x8210) {
pr_info("%s(): Exiting. Incorrect Hardware device = 0x%02x\n",
__func__, dev->pci->device);
};
struct cx25821_board {
- char *name;
+ const char *name;
enum port porta;
enum port portb;
enum port portc;
/* ----------------------------------------------------------------------- */
-static void cx23885_std_setup(struct i2c_client *client);
+static void cx23888_std_setup(struct i2c_client *client);
int cx25840_write(struct i2c_client *client, u16 addr, u8 value)
{
finish_wait(&state->fw_wait, &wait);
destroy_workqueue(q);
- /* Call the cx23885 specific std setup func, we no longer rely on
+ /* Call the cx23888 specific std setup func, we no longer rely on
* the generic cx24840 func.
*/
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
+ else
+ cx25840_std_setup(client);
/* (re)set input */
set_input(client, state->vid_input, state->aud_input);
cx25840_write4(client, 0x410, 0xffff0dbf);
cx25840_write4(client, 0x414, 0x00137d03);
- cx25840_write4(client, 0x418, 0x01008080);
+
+ /* on the 887, 0x418 is HSCALE_CTRL, on the 888 it is
+ CHROMA_CTRL */
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x418, 0x01008080);
+ else
+ cx25840_write4(client, 0x418, 0x01000000);
+
cx25840_write4(client, 0x41c, 0x00000000);
- cx25840_write4(client, 0x420, 0x001c3e0f);
+
+ /* on the 887, 0x420 is CHROMA_CTRL, on the 888 it is
+ CRUSH_CTRL */
+ if (is_cx23888(state))
+ cx25840_write4(client, 0x420, 0x001c3e0f);
+ else
+ cx25840_write4(client, 0x420, 0x001c8282);
+
cx25840_write4(client, 0x42c, 0x42600000);
cx25840_write4(client, 0x430, 0x0000039b);
cx25840_write4(client, 0x438, 0x00000000);
cx25840_write4(client, 0x8d0, 0x1f063870);
}
- if (is_cx2388x(state)) {
+ if (is_cx23888(state)) {
/* HVR1850 */
/* AUD_IO_CTRL - I2S Input, Parallel1*/
/* - Channel 1 src - Parallel1 (Merlin out) */
}
cx25840_and_or(client, 0x400, ~0xf, fmt);
cx25840_and_or(client, 0x403, ~0x3, pal_m);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
else
cx25840_std_setup(client);
if (!is_cx2583x(state))
static int cx25840_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
+ struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
switch (ctrl->id) {
break;
case V4L2_CID_SATURATION:
- cx25840_write(client, 0x420, ctrl->val << 1);
- cx25840_write(client, 0x421, ctrl->val << 1);
+ if (is_cx23888(state)) {
+ cx25840_write(client, 0x418, ctrl->val << 1);
+ cx25840_write(client, 0x419, ctrl->val << 1);
+ } else {
+ cx25840_write(client, 0x420, ctrl->val << 1);
+ cx25840_write(client, 0x421, ctrl->val << 1);
+ }
break;
case V4L2_CID_HUE:
- cx25840_write(client, 0x422, ctrl->val);
+ if (is_cx23888(state))
+ cx25840_write(client, 0x41a, ctrl->val);
+ else
+ cx25840_write(client, 0x422, ctrl->val);
break;
default:
fmt->field = V4L2_FIELD_INTERLACED;
fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
- Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
- Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+ if (is_cx23888(state)) {
+ Vsrc = (cx25840_read(client, 0x42a) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x429) & 0xf0) >> 4;
+ } else {
+ Vsrc = (cx25840_read(client, 0x476) & 0x3f) << 4;
+ Vsrc |= (cx25840_read(client, 0x475) & 0xf0) >> 4;
+ }
- Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
- Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+ if (is_cx23888(state)) {
+ Hsrc = (cx25840_read(client, 0x426) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x425) & 0xf0) >> 4;
+ } else {
+ Hsrc = (cx25840_read(client, 0x472) & 0x3f) << 4;
+ Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
+ }
Vlines = fmt->height + (is_50Hz ? 4 : 7);
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
return set_input(client, input, state->aud_input);
}
struct cx25840_state *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- if (is_cx2388x(state))
- cx23885_std_setup(client);
+ if (is_cx23888(state))
+ cx23888_std_setup(client);
return set_input(client, state->vid_input, input);
}
}
}
-static void cx23885_std_setup(struct i2c_client *client)
+static void cx23888_std_setup(struct i2c_client *client)
{
struct cx25840_state *state = to_state(i2c_get_clientdata(client));
v4l2_std_id std = state->std;
if (dev->board.has_dvb)
request_module("em28xx-dvb");
- if (dev->board.has_ir_i2c && !disable_ir)
+ if (dev->board.ir_codes && !disable_ir)
request_module("em28xx-rc");
}
set_gamma(gspca_dev, v4l2_ctrl_g_ctrl(sd->gamma));
set_redblue(gspca_dev, v4l2_ctrl_g_ctrl(sd->blue),
v4l2_ctrl_g_ctrl(sd->red));
- set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
- set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
- set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
- v4l2_ctrl_g_ctrl(sd->vflip));
+ if (sd->gain)
+ set_gain(gspca_dev, v4l2_ctrl_g_ctrl(sd->gain));
+ if (sd->exposure)
+ set_exposure(gspca_dev, v4l2_ctrl_g_ctrl(sd->exposure));
+ if (sd->hflip)
+ set_hvflip(gspca_dev, v4l2_ctrl_g_ctrl(sd->hflip),
+ v4l2_ctrl_g_ctrl(sd->vflip));
reg_w1(gspca_dev, 0x1007, 0x20);
reg_w1(gspca_dev, 0x1061, 0x03);
struct sd *sd = (struct sd *) gspca_dev;
int avg_lum;
- if (!v4l2_ctrl_g_ctrl(sd->autogain))
+ if (sd->autogain == NULL || !v4l2_ctrl_g_ctrl(sd->autogain))
return;
avg_lum = atomic_read(&sd->avg_lum);
#define CSICR1_INV_DATA (1 << 3)
#define CSICR1_INV_PCLK (1 << 2)
#define CSICR1_REDGE (1 << 1)
+#define CSICR1_FMT_MASK (CSICR1_PACK_DIR | CSICR1_SWAP16_EN)
#define SHIFT_STATFF_LEVEL 22
#define SHIFT_RXFF_LEVEL 19
u32 src_pixel;
u32 ch1_pixel;
u32 irq_flags;
+ u32 csicr1;
};
/* prp resizing parameters */
.ch1_pixel = 0x2ca00565, /* RGB565 */
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH1WERR |
PRP_INTR_CH1FC | PRP_INTR_LBOVF,
+ .csicr1 = 0,
}
},
{
.irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
PRP_INTR_CH2FC | PRP_INTR_LBOVF |
PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_PACK_DIR,
+ }
+ },
+ {
+ .in_fmt = V4L2_MBUS_FMT_UYVY8_2X8,
+ .out_fmt = V4L2_PIX_FMT_YUV420,
+ .cfg = {
+ .channel = 2,
+ .in_fmt = PRP_CNTL_DATA_IN_YUV422,
+ .out_fmt = PRP_CNTL_CH2_OUT_YUV420,
+ .src_pixel = 0x22000888, /* YUV422 (YUYV) */
+ .irq_flags = PRP_INTR_RDERR | PRP_INTR_CH2WERR |
+ PRP_INTR_CH2FC | PRP_INTR_LBOVF |
+ PRP_INTR_CH2OVF,
+ .csicr1 = CSICR1_SWAP16_EN,
}
},
};
return ret;
}
+ csicr1 = (csicr1 & ~CSICR1_FMT_MASK) | pcdev->emma_prp->cfg.csicr1;
+
if (common_flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
csicr1 |= CSICR1_REDGE;
if (common_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_SOF_POL;
if (common_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
csicr1 |= CSICR1_HSYNC_POL;
- if (pcdev->platform_flags & MX2_CAMERA_SWAP16)
- csicr1 |= CSICR1_SWAP16_EN;
if (pcdev->platform_flags & MX2_CAMERA_EXT_VSYNC)
csicr1 |= CSICR1_EXT_VSYNC;
if (pcdev->platform_flags & MX2_CAMERA_CCIR)
csicr1 |= CSICR1_GCLK_MODE;
if (pcdev->platform_flags & MX2_CAMERA_INV_DATA)
csicr1 |= CSICR1_INV_DATA;
- if (pcdev->platform_flags & MX2_CAMERA_PACK_DIR_MSB)
- csicr1 |= CSICR1_PACK_DIR;
pcdev->csicr1 = csicr1;
return 0;
}
- if (code == V4L2_MBUS_FMT_YUYV8_2X8) {
+ if (code == V4L2_MBUS_FMT_YUYV8_2X8 ||
+ code == V4L2_MBUS_FMT_UYVY8_2X8) {
formats++;
if (xlate) {
/*
preview_config_contrast,
NULL,
offsetof(struct prev_params, contrast),
- 0, true,
+ 0, 0, true,
}, /* OMAP3ISP_PREV_BRIGHTNESS */ {
preview_config_brightness,
NULL,
offsetof(struct prev_params, brightness),
- 0, true,
+ 0, 0, true,
},
};
unsigned int elv = prev->crop.top + prev->crop.height - 1;
u32 features;
- if (format->code == V4L2_MBUS_FMT_Y10_1X10) {
+ if (format->code != V4L2_MBUS_FMT_Y10_1X10) {
sph -= 2;
eph += 2;
slv -= 2;
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/mm.h>
+#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
if (pixm)
sizes[i] = max(size, pixm->plane_fmt[i].sizeimage);
else
- sizes[i] = size;
+ sizes[i] = max_t(u32, size, frame->payload[i]);
+
allocators[i] = ctx->fimc_dev->alloc_ctx;
}
static int fimc_capture_open(struct file *file)
{
struct fimc_dev *fimc = video_drvdata(file);
- int ret = v4l2_fh_open(file);
-
- if (ret)
- return ret;
+ int ret;
dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state);
- /* Return if the corresponding video mem2mem node is already opened. */
if (fimc_m2m_active(fimc))
return -EBUSY;
set_bit(ST_CAPT_BUSY, &fimc->state);
- pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ if (ret < 0)
+ return ret;
- if (++fimc->vid_cap.refcnt == 1) {
- ret = fimc_pipeline_initialize(&fimc->pipeline,
- &fimc->vid_cap.vfd->entity, true);
- if (ret < 0) {
- dev_err(&fimc->pdev->dev,
- "Video pipeline initialization failed\n");
- pm_runtime_put_sync(&fimc->pdev->dev);
- fimc->vid_cap.refcnt--;
- v4l2_fh_release(file);
- clear_bit(ST_CAPT_BUSY, &fimc->state);
- return ret;
- }
- ret = fimc_capture_ctrls_create(fimc);
+ ret = v4l2_fh_open(file);
+ if (ret)
+ return ret;
- if (!ret && !fimc->vid_cap.user_subdev_api)
- ret = fimc_capture_set_default_format(fimc);
+ if (++fimc->vid_cap.refcnt != 1)
+ return 0;
+
+ ret = fimc_pipeline_initialize(&fimc->pipeline,
+ &fimc->vid_cap.vfd->entity, true);
+ if (ret < 0) {
+ clear_bit(ST_CAPT_BUSY, &fimc->state);
+ pm_runtime_put_sync(&fimc->pdev->dev);
+ fimc->vid_cap.refcnt--;
+ v4l2_fh_release(file);
+ return ret;
}
+ ret = fimc_capture_ctrls_create(fimc);
+
+ if (!ret && !fimc->vid_cap.user_subdev_api)
+ ret = fimc_capture_set_default_format(fimc);
+
return ret;
}
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_ctx *ctx = fimc->vid_cap.ctx;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
return fimc_fill_format(&ctx->d_frame, f);
}
struct v4l2_mbus_framefmt mf;
struct fimc_fmt *ffmt = NULL;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
-
if (pix->pixelformat == V4L2_PIX_FMT_JPEG) {
fimc_capture_try_format(ctx, &pix->width, &pix->height,
NULL, &pix->pixelformat,
struct fimc_fmt *s_fmt = NULL;
int ret, i;
- if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
- return -EINVAL;
if (vb2_is_busy(&fimc->vid_cap.vbq))
return -EBUSY;
pix->width = mf->width;
pix->height = mf->height;
}
+
fimc_adjust_mplane_format(ff->fmt, pix->width, pix->height, pix);
for (i = 0; i < ff->fmt->colplanes; i++)
- ff->payload[i] =
- (pix->width * pix->height * ff->fmt->depth[i]) / 8;
+ ff->payload[i] = pix->plane_fmt[i].sizeimage;
set_frame_bounds(ff, pix->width, pix->height);
/* Reset the composition rectangle if not yet configured */
{
struct fimc_dev *fimc = video_drvdata(file);
struct fimc_pipeline *p = &fimc->pipeline;
+ struct v4l2_subdev *sd = p->subdevs[IDX_SENSOR];
int ret;
if (fimc_capture_active(fimc))
return -EBUSY;
- media_entity_pipeline_start(&p->subdevs[IDX_SENSOR]->entity,
- p->m_pipeline);
+ ret = media_entity_pipeline_start(&sd->entity, p->m_pipeline);
+ if (ret < 0)
+ return ret;
if (fimc->vid_cap.user_subdev_api) {
ret = fimc_pipeline_validate(fimc);
- if (ret)
+ if (ret < 0) {
+ media_entity_pipeline_stop(&sd->entity);
return ret;
+ }
}
return vb2_streamon(&fimc->vid_cap.vbq, type);
}
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr",
+ .name = "YUV 4:2:0 non-contig. 2p, Y/CbCr",
.fourcc = V4L2_PIX_FMT_NV12M,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 4 },
.colplanes = 2,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 3-planar, Y/Cb/Cr",
+ .name = "YUV 4:2:0 non-contig. 3p, Y/Cb/Cr",
.fourcc = V4L2_PIX_FMT_YUV420M,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 2, 2 },
.colplanes = 3,
.flags = FMT_FLAGS_M2M,
}, {
- .name = "YUV 4:2:0 non-contiguous 2-planar, Y/CbCr, tiled",
+ .name = "YUV 4:2:0 non-contig. 2p, tiled",
.fourcc = V4L2_PIX_FMT_NV12MT,
.color = FIMC_FMT_YCBCR420,
.depth = { 8, 4 },
if (!ctrls->ready)
return;
- mutex_lock(&ctrls->handler.lock);
+ mutex_lock(ctrls->handler.lock);
v4l2_ctrl_activate(ctrls->rotate, active);
v4l2_ctrl_activate(ctrls->hflip, active);
v4l2_ctrl_activate(ctrls->vflip, active);
ctx->hflip = 0;
ctx->vflip = 0;
}
- mutex_unlock(&ctrls->handler.lock);
+ mutex_unlock(ctrls->handler.lock);
}
/* Update maximum value of the alpha color control */
pix->width = width;
for (i = 0; i < pix->num_planes; ++i) {
- u32 bpl = pix->plane_fmt[i].bytesperline;
- u32 *sizeimage = &pix->plane_fmt[i].sizeimage;
+ struct v4l2_plane_pix_format *plane_fmt = &pix->plane_fmt[i];
+ u32 bpl = plane_fmt->bytesperline;
if (fmt->colplanes > 1 && (bpl == 0 || bpl < pix->width))
bpl = pix->width; /* Planar */
if (i == 0) /* Same bytesperline for each plane. */
bytesperline = bpl;
- pix->plane_fmt[i].bytesperline = bytesperline;
- *sizeimage = (pix->width * pix->height * fmt->depth[i]) / 8;
+ plane_fmt->bytesperline = bytesperline;
+ plane_fmt->sizeimage = max((pix->width * pix->height *
+ fmt->depth[i]) / 8, plane_fmt->sizeimage);
}
}
static int fimc_lite_open(struct file *file)
{
struct fimc_lite *fimc = video_drvdata(file);
- int ret = v4l2_fh_open(file);
+ int ret;
- if (ret)
- return ret;
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
set_bit(ST_FLITE_IN_USE, &fimc->state);
- pm_runtime_get_sync(&fimc->pdev->dev);
+ ret = pm_runtime_get_sync(&fimc->pdev->dev);
+ if (ret < 0)
+ goto done;
- if (++fimc->ref_count != 1 || fimc->out_path != FIMC_IO_DMA)
- return ret;
+ ret = v4l2_fh_open(file);
+ if (ret < 0)
+ goto done;
- ret = fimc_pipeline_initialize(&fimc->pipeline, &fimc->vfd->entity,
- true);
- if (ret < 0) {
- v4l2_err(fimc->vfd, "Video pipeline initialization failed\n");
- pm_runtime_put_sync(&fimc->pdev->dev);
- fimc->ref_count--;
- v4l2_fh_release(file);
- clear_bit(ST_FLITE_IN_USE, &fimc->state);
- }
+ if (++fimc->ref_count == 1 && fimc->out_path == FIMC_IO_DMA) {
+ ret = fimc_pipeline_initialize(&fimc->pipeline,
+ &fimc->vfd->entity, true);
+ if (ret < 0) {
+ pm_runtime_put_sync(&fimc->pdev->dev);
+ fimc->ref_count--;
+ v4l2_fh_release(file);
+ clear_bit(ST_FLITE_IN_USE, &fimc->state);
+ }
- fimc_lite_clear_event_counters(fimc);
+ fimc_lite_clear_event_counters(fimc);
+ }
+done:
+ mutex_unlock(&fimc->lock);
return ret;
}
static int fimc_lite_close(struct file *file)
{
struct fimc_lite *fimc = video_drvdata(file);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) {
clear_bit(ST_FLITE_IN_USE, &fimc->state);
if (fimc->ref_count == 0)
vb2_queue_release(&fimc->vb_queue);
- return v4l2_fh_release(file);
+ ret = v4l2_fh_release(file);
+
+ mutex_unlock(&fimc->lock);
+ return ret;
}
static unsigned int fimc_lite_poll(struct file *file,
struct poll_table_struct *wait)
{
struct fimc_lite *fimc = video_drvdata(file);
- return vb2_poll(&fimc->vb_queue, file, wait);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return POLL_ERR;
+
+ ret = vb2_poll(&fimc->vb_queue, file, wait);
+ mutex_unlock(&fimc->lock);
+
+ return ret;
}
static int fimc_lite_mmap(struct file *file, struct vm_area_struct *vma)
{
struct fimc_lite *fimc = video_drvdata(file);
- return vb2_mmap(&fimc->vb_queue, vma);
+ int ret;
+
+ if (mutex_lock_interruptible(&fimc->lock))
+ return -ERESTARTSYS;
+
+ ret = vb2_mmap(&fimc->vb_queue, vma);
+ mutex_unlock(&fimc->lock);
+
+ return ret;
}
static const struct v4l2_file_operations fimc_lite_fops = {
if (fimc_lite_active(fimc))
return -EBUSY;
- media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
+ ret = media_entity_pipeline_start(&sensor->entity, p->m_pipeline);
+ if (ret < 0)
+ return ret;
ret = fimc_pipeline_validate(fimc);
if (ret) {
return 0;
ret = fimc_lite_stop_capture(fimc, suspend);
- if (ret)
+ if (ret < 0 || !fimc_lite_active(fimc))
return ret;
return fimc_pipeline_shutdown(&fimc->pipeline);
int fimc_pipeline_shutdown(struct fimc_pipeline *p)
{
- struct media_entity *me = &p->subdevs[IDX_SENSOR]->entity;
+ struct media_entity *me;
int ret;
+ if (!p || !p->subdevs[IDX_SENSOR])
+ return -EINVAL;
+
+ me = &p->subdevs[IDX_SENSOR]->entity;
mutex_lock(&me->parent->graph_mutex);
ret = __fimc_pipeline_shutdown(p);
mutex_unlock(&me->parent->graph_mutex);
* @source: the source entity to create links to all fimc entities from
* @sensor: sensor subdev linked to FIMC[fimc_id] entity, may be null
* @pad: the source entity pad index
- * @fimc_id: index of the fimc device for which link should be enabled
+ * @link_mask: bitmask of the fimc devices for which link should be enabled
*/
static int __fimc_md_create_fimc_sink_links(struct fimc_md *fmd,
struct media_entity *source,
struct v4l2_subdev *sensor,
- int pad, int fimc_id)
+ int pad, int link_mask)
{
struct fimc_sensor_info *s_info;
struct media_entity *sink;
if (!fmd->fimc[i]->variant->has_cam_if)
continue;
- flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ flags = ((1 << i) & link_mask) ? MEDIA_LNK_FL_ENABLED : 0;
sink = &fmd->fimc[i]->vid_cap.subdev.entity;
ret = media_entity_create_link(source, pad, sink,
if (!fmd->fimc_lite[i])
continue;
- flags = (i == fimc_id) ? MEDIA_LNK_FL_ENABLED : 0;
+ if (link_mask & (1 << (i + FIMC_MAX_DEVS)))
+ flags = MEDIA_LNK_FL_ENABLED;
+ else
+ flags = 0;
sink = &fmd->fimc_lite[i]->subdev.entity;
ret = media_entity_create_link(source, pad, sink,
struct s5p_fimc_isp_info *pdata;
struct fimc_sensor_info *s_info;
struct media_entity *source, *sink;
- int i, pad, fimc_id = 0;
- int ret = 0;
- u32 flags;
+ int i, pad, fimc_id = 0, ret = 0;
+ u32 flags, link_mask = 0;
for (i = 0; i < fmd->num_sensors; i++) {
if (fmd->sensor[i].subdev == NULL)
if (source == NULL)
continue;
+ link_mask = 1 << fimc_id++;
ret = __fimc_md_create_fimc_sink_links(fmd, source, sensor,
- pad, fimc_id++);
+ pad, link_mask);
}
- fimc_id = 0;
for (i = 0; i < ARRAY_SIZE(fmd->csis); i++) {
if (fmd->csis[i].sd == NULL)
continue;
source = &fmd->csis[i].sd->entity;
pad = CSIS_PAD_SOURCE;
+ link_mask = 1 << fimc_id++;
ret = __fimc_md_create_fimc_sink_links(fmd, source, NULL,
- pad, fimc_id++);
+ pad, link_mask);
}
/* Create immutable links between each FIMC's subdev and video node */
}
static int __fimc_md_set_camclk(struct fimc_md *fmd,
- struct fimc_sensor_info *s_info,
- bool on)
+ struct fimc_sensor_info *s_info,
+ bool on)
{
struct s5p_fimc_isp_info *pdata = s_info->pdata;
struct fimc_camclk_info *camclk;
if (WARN_ON(pdata->clk_id >= FIMC_MAX_CAMCLKS) || fmd == NULL)
return -EINVAL;
- if (s_info->clk_on == on)
- return 0;
camclk = &fmd->camclk[pdata->clk_id];
- dbg("camclk %d, f: %lu, clk: %p, on: %d",
- pdata->clk_id, pdata->clk_frequency, camclk, on);
+ dbg("camclk %d, f: %lu, use_count: %d, on: %d",
+ pdata->clk_id, pdata->clk_frequency, camclk->use_count, on);
if (on) {
if (camclk->use_count > 0 &&
clk_set_rate(camclk->clock, pdata->clk_frequency);
camclk->frequency = pdata->clk_frequency;
ret = clk_enable(camclk->clock);
+ dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
+ clk_get_rate(camclk->clock));
}
- s_info->clk_on = 1;
- dbg("Enabled camclk %d: f: %lu", pdata->clk_id,
- clk_get_rate(camclk->clock));
-
return ret;
}
if (--camclk->use_count == 0) {
clk_disable(camclk->clock);
- s_info->clk_on = 0;
dbg("Disabled camclk %d", pdata->clk_id);
}
return ret;
* devices to which sensors can be attached, either directly or through
* the MIPI CSI receiver. The clock is allowed here to be used by
* multiple sensors concurrently if they use same frequency.
- * The per sensor subdev clk_on attribute helps to synchronize accesses
- * to the sclk_cam clocks from the video and media device nodes.
* This function should only be called when the graph mutex is held.
*/
int fimc_md_set_camclk(struct v4l2_subdev *sd, bool on)
* @pdata: sensor's atrributes passed as media device's platform data
* @subdev: image sensor v4l2 subdev
* @host: fimc device the sensor is currently linked to
- * @clk_on: sclk_cam clock's state associated with this subdev
*
* This data structure applies to image sensor and the writeback subdevs.
*/
struct s5p_fimc_isp_info *pdata;
struct v4l2_subdev *subdev;
struct fimc_dev *host;
- bool clk_on;
};
/**
for (i = 0; i < NUM_CTRLS; i++) {
if (IS_MFC51_PRIV(controls[i].id)) {
+ memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
cfg.ops = &s5p_mfc_dec_ctrl_ops;
cfg.id = controls[i].id;
cfg.min = controls[i].minimum;
}
for (i = 0; i < NUM_CTRLS; i++) {
if (IS_MFC51_PRIV(controls[i].id)) {
+ memset(&cfg, 0, sizeof(struct v4l2_ctrl_config));
cfg.ops = &s5p_mfc_enc_ctrl_ops;
cfg.id = controls[i].id;
cfg.min = controls[i].minimum;
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/v4l2-mediabus.h>
SET_VALID_IOCTL(ops, VIDIOC_G_DV_TIMINGS, vidioc_g_dv_timings);
SET_VALID_IOCTL(ops, VIDIOC_ENUM_DV_TIMINGS, vidioc_enum_dv_timings);
SET_VALID_IOCTL(ops, VIDIOC_QUERY_DV_TIMINGS, vidioc_query_dv_timings);
+ SET_VALID_IOCTL(ops, VIDIOC_DV_TIMINGS_CAP, vidioc_dv_timings_cap);
/* yes, really vidioc_subscribe_event */
SET_VALID_IOCTL(ops, VIDIOC_DQEVENT, vidioc_subscribe_event);
SET_VALID_IOCTL(ops, VIDIOC_SUBSCRIBE_EVENT, vidioc_subscribe_event);
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
select REGMAP_I2C
+ select IRQ_DOMAIN
default n
help
Say yes here if you want support for Texas Instruments TWL6040 audio
+++ /dev/null
-/*
- * Copyright (C) 2011 ST-Ericsson
- * License terms: GNU General Public License (GPL) version 2
- * Shared definitions and data structures for the AB5500 MFD driver
- */
-
-/* Read/write operation values. */
-#define AB5500_PERM_RD (0x01)
-#define AB5500_PERM_WR (0x02)
-
-/* Read/write permissions. */
-#define AB5500_PERM_RO (AB5500_PERM_RD)
-#define AB5500_PERM_RW (AB5500_PERM_RD | AB5500_PERM_WR)
-
-#define AB5500_MASK_BASE (0x60)
-#define AB5500_MASK_END (0x79)
-#define AB5500_CHIP_ID (0x20)
-
-/**
- * struct ab5500_reg_range
- * @first: the first address of the range
- * @last: the last address of the range
- * @perm: access permissions for the range
- */
-struct ab5500_reg_range {
- u8 first;
- u8 last;
- u8 perm;
-};
-
-/**
- * struct ab5500_i2c_ranges
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_ranges {
- u8 nranges;
- u8 bankid;
- const struct ab5500_reg_range *range;
-};
-
-/**
- * struct ab5500_i2c_banks
- * @count: the number of ranges in the list
- * @range: the list of register ranges
- */
-struct ab5500_i2c_banks {
- u8 nbanks;
- const struct ab5500_i2c_ranges *bank;
-};
-
-/**
- * struct ab5500_bank
- * @slave_addr: I2C slave_addr found in AB5500 specification
- * @name: Documentation name of the bank. For reference
- */
-struct ab5500_bank {
- u8 slave_addr;
- const char *name;
-};
-
-static const struct ab5500_bank bankinfo[AB5500_NUM_BANKS] = {
- [AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP] = {
- AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP, "VIT_IO_I2C_CLK_TST_OTP"},
- [AB5500_BANK_VDDDIG_IO_I2C_CLK_TST] = {
- AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST, "VDDDIG_IO_I2C_CLK_TST"},
- [AB5500_BANK_VDENC] = {AB5500_ADDR_VDENC, "VDENC"},
- [AB5500_BANK_SIM_USBSIM] = {AB5500_ADDR_SIM_USBSIM, "SIM_USBSIM"},
- [AB5500_BANK_LED] = {AB5500_ADDR_LED, "LED"},
- [AB5500_BANK_ADC] = {AB5500_ADDR_ADC, "ADC"},
- [AB5500_BANK_RTC] = {AB5500_ADDR_RTC, "RTC"},
- [AB5500_BANK_STARTUP] = {AB5500_ADDR_STARTUP, "STARTUP"},
- [AB5500_BANK_DBI_ECI] = {AB5500_ADDR_DBI_ECI, "DBI-ECI"},
- [AB5500_BANK_CHG] = {AB5500_ADDR_CHG, "CHG"},
- [AB5500_BANK_FG_BATTCOM_ACC] = {
- AB5500_ADDR_FG_BATTCOM_ACC, "FG_BATCOM_ACC"},
- [AB5500_BANK_USB] = {AB5500_ADDR_USB, "USB"},
- [AB5500_BANK_IT] = {AB5500_ADDR_IT, "IT"},
- [AB5500_BANK_VIBRA] = {AB5500_ADDR_VIBRA, "VIBRA"},
- [AB5500_BANK_AUDIO_HEADSETUSB] = {
- AB5500_ADDR_AUDIO_HEADSETUSB, "AUDIO_HEADSETUSB"},
-};
-
-int ab5500_get_register_interruptible_raw(struct ab5500 *ab, u8 bank, u8 reg,
- u8 *value);
-int ab5500_mask_and_set_register_interruptible_raw(struct ab5500 *ab, u8 bank,
- u8 reg, u8 bitmask, u8 bitvalues);
.reg_bits = 7,
.pad_bits = 1,
.val_bits = 24,
+ .write_flag_mask = 0x80,
.max_register = MC13XXX_NUMREGS,
.cache_type = REGCACHE_NONE,
+ .use_single_rw = 1,
+};
+
+static int mc13xxx_spi_read(void *context, const void *reg, size_t reg_size,
+ void *val, size_t val_size)
+{
+ unsigned char w[4] = { *((unsigned char *) reg), 0, 0, 0};
+ unsigned char r[4];
+ unsigned char *p = val;
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+ struct spi_transfer t = {
+ .tx_buf = w,
+ .rx_buf = r,
+ .len = 4,
+ };
+
+ struct spi_message m;
+ int ret;
+
+ if (val_size != 3 || reg_size != 1)
+ return -ENOTSUPP;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ ret = spi_sync(spi, &m);
+
+ memcpy(p, &r[1], 3);
+
+ return ret;
+}
+
+static int mc13xxx_spi_write(void *context, const void *data, size_t count)
+{
+ struct device *dev = context;
+ struct spi_device *spi = to_spi_device(dev);
+
+ if (count != 4)
+ return -ENOTSUPP;
+
+ return spi_write(spi, data, count);
+}
+
+/*
+ * We cannot use regmap-spi generic bus implementation here.
+ * The MC13783 chip will get corrupted if CS signal is deasserted
+ * and on i.Mx31 SoC (the target SoC for MC13783 PMIC) the SPI controller
+ * has the following errata (DSPhl22960):
+ * "The CSPI negates SS when the FIFO becomes empty with
+ * SSCTL= 0. Software cannot guarantee that the FIFO will not
+ * drain because of higher priority interrupts and the
+ * non-realtime characteristics of the operating system. As a
+ * result, the SS will negate before all of the data has been
+ * transferred to/from the peripheral."
+ * We workaround this by accessing the SPI controller with a
+ * single transfert.
+ */
+
+static struct regmap_bus regmap_mc13xxx_bus = {
+ .write = mc13xxx_spi_write,
+ .read = mc13xxx_spi_read,
};
static int mc13xxx_spi_probe(struct spi_device *spi)
dev_set_drvdata(&spi->dev, mc13xxx);
spi->mode = SPI_MODE_0 | SPI_CS_HIGH;
- spi->bits_per_word = 32;
mc13xxx->dev = &spi->dev;
mutex_init(&mc13xxx->lock);
- mc13xxx->regmap = regmap_init_spi(spi, &mc13xxx_regmap_spi_config);
+ mc13xxx->regmap = regmap_init(&spi->dev, ®map_mc13xxx_bus, &spi->dev,
+ &mc13xxx_regmap_spi_config);
+
if (IS_ERR(mc13xxx->regmap)) {
ret = PTR_ERR(mc13xxx->regmap);
dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
+#include <linux/gpio.h>
#include <plat/cpu.h>
#include <plat/usb.h>
#include <linux/pm_runtime.h>
dev_dbg(dev, "starting TI HSUSB Controller\n");
pm_runtime_get_sync(dev);
- spin_lock_irqsave(&omap->lock, flags);
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[0],
+ GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_request_one(pdata->ehci_data->reset_gpio_port[1],
+ GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+
+ /* Hold the PHY in RESET for enough time till DIR is high */
+ udelay(10);
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
}
spin_unlock_irqrestore(&omap->lock, flags);
+
+ if (pdata->ehci_data->phy_reset) {
+ /* Hold the PHY in RESET for enough time till
+ * PHY is settled and ready
+ */
+ udelay(10);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[0], 1);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_set_value_cansleep
+ (pdata->ehci_data->reset_gpio_port[1], 1);
+ }
+
pm_runtime_put_sync(dev);
}
+static void omap_usbhs_deinit(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+
+ if (pdata->ehci_data->phy_reset) {
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+ if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+ gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+ }
+}
+
/**
* usbhs_omap_probe - initialize TI-based HCDs
goto end_probe;
err_alloc:
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
err_tll:
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+ omap_usbhs_deinit(&pdev->dev);
iounmap(omap->tll_base);
iounmap(omap->uhh_base);
clk_put(omap->init_60m_fclk);
}
}
- ret = regmap_add_irq_chip(palmas->regmap[1], palmas->irq,
+ /* Change IRQ into clear on read mode for efficiency */
+ slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
+ addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
+ reg = PALMAS_INT_CTRL_INT_CLEAR;
+
+ regmap_write(palmas->regmap[slave], addr, reg);
+
+ ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
IRQF_ONESHOT | IRQF_TRIGGER_LOW, -1, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
goto err;
}
+ children[PALMAS_PMIC_ID].platform_data = pdata->pmic_pdata;
+ children[PALMAS_PMIC_ID].pdata_size = sizeof(*pdata->pmic_pdata);
+
ret = mfd_add_devices(palmas->dev, -1,
children, ARRAY_SIZE(palmas_children),
NULL, regmap_irq_chip_get_base(palmas->irq_data));
{ "twl6035", },
{ "twl6037", },
{ "tps65913", },
+ { /* end */ }
};
MODULE_DEVICE_TABLE(i2c, palmas_i2c_id);
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
if (msg->activate_gru_mq_desc_gpa !=
part_uv->activate_gru_mq_desc_gpa) {
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
+ spin_lock(&part_uv->flags_lock);
part_uv->flags &= ~XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
+ spin_unlock(&part_uv->flags_lock);
part_uv->activate_gru_mq_desc_gpa =
msg->activate_gru_mq_desc_gpa;
}
goto egpioreq;
ret = request_threaded_irq(irq, NULL, mmc_cd_gpio_irqt,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- cd->label, host);
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT, cd->label, host);
if (ret < 0)
goto eirqreq;
card->ext_csd.generic_cmd6_time);
}
- if (err)
- pr_err("%s: power class selection for ext_csd_bus_width %d"
- " failed\n", mmc_hostname(card->host), bus_width);
-
return err;
}
EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to bus width %d"
+ " failed\n", mmc_hostname(card->host),
+ 1 << bus_width);
}
/*
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to "
+ "bus width %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
- goto err;
+ pr_warning("%s: power class selection to "
+ "bus width %d ddr %d failed\n",
+ mmc_hostname(card->host),
+ 1 << bus_width, ddr);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
*/
memset(chip->oob_poi, ~0, mtd->oobsize);
chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
-
- read_page_swap_end(this, buf, mtd->writesize,
- this->payload_virt, this->payload_phys,
- nfc_geo->payload_size,
- payload_virt, payload_phys);
}
+
+ read_page_swap_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
exit_nfc:
return ret;
}
static const char *part_probes[] = { "RedBoot", "cmdlinepart", "ofpart", NULL };
+static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
+{
+ int i;
+ u32 *t = trg;
+ const __iomem u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ *t++ = __raw_readl(s++);
+}
+
+static void memcpy32_toio(void __iomem *trg, const void *src, int size)
+{
+ int i;
+ u32 __iomem *t = trg;
+ const u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ __raw_writel(*s++, t++);
+}
+
static int check_int_v3(struct mxc_nand_host *host)
{
uint32_t tmp;
wait_op_done(host, true);
- memcpy_fromio(host->data_buf, host->main_area0, 16);
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
}
/* Request the NANDFC to perform a read of the NAND device ID. */
/* Wait for operation to complete */
wait_op_done(host, true);
- memcpy_fromio(host->data_buf, host->main_area0, 16);
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
if (this->options & NAND_BUSWIDTH_16) {
/* compress the ID info */
if (bfrom) {
for (i = 0; i < n - 1; i++)
- memcpy_fromio(d + i * j, s + i * t, j);
+ memcpy32_fromio(d + i * j, s + i * t, j);
/* the last section */
- memcpy_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
+ memcpy32_fromio(d + i * j, s + i * t, mtd->oobsize - i * j);
} else {
for (i = 0; i < n - 1; i++)
- memcpy_toio(&s[i * t], &d[i * j], j);
+ memcpy32_toio(&s[i * t], &d[i * j], j);
/* the last section */
- memcpy_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
+ memcpy32_toio(&s[i * t], &d[i * j], mtd->oobsize - i * j);
}
}
host->devtype_data->send_page(mtd, NFC_OUTPUT);
- memcpy_fromio(host->data_buf, host->main_area0, mtd->writesize);
+ memcpy32_fromio(host->data_buf, host->main_area0,
+ mtd->writesize);
copy_spare(mtd, true);
break;
break;
case NAND_CMD_PAGEPROG:
- memcpy_toio(host->main_area0, host->data_buf, mtd->writesize);
+ memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
copy_spare(mtd, false);
host->devtype_data->send_page(mtd, NFC_INPUT);
host->devtype_data->send_cmd(host, command, true);
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/vmalloc.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/string.h>
return kstrdup(buf, GFP_KERNEL);
}
-static uint64_t divide(uint64_t n, uint32_t d)
-{
- do_div(n, d);
- return n;
-}
-
/*
* Initialize the nandsim structure.
*
ns->geom.oobsz = mtd->oobsize;
ns->geom.secsz = mtd->erasesize;
ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
- ns->geom.pgnum = divide(ns->geom.totsz, ns->geom.pgsz);
+ ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz);
ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
ns->geom.secshift = ffs(ns->geom.secsz) - 1;
ns->geom.pgshift = chip->page_shift;
if (!rptwear)
return 0;
- wear_eb_count = divide(mtd->size, mtd->erasesize);
+ wear_eb_count = div_u64(mtd->size, mtd->erasesize);
mem = wear_eb_count * sizeof(unsigned long);
if (mem / sizeof(unsigned long) != wear_eb_count) {
NS_ERR("Too many erase blocks for wear reporting\n");
#include "bonding.h"
#include "bond_alb.h"
-#ifdef CONFIG_DEBUG_FS
+#if defined(CONFIG_DEBUG_FS) && !defined(CONFIG_NET_NS)
#include <linux/debugfs.h>
#include <linux/seq_file.h>
switch (event) {
case NETDEV_CHANGENAME:
return bond_event_changename(event_bond);
+ case NETDEV_UNREGISTER:
+ bond_remove_proc_entry(event_bond);
+ break;
+ case NETDEV_REGISTER:
+ bond_create_proc_entry(event_bond);
+ break;
default:
break;
}
bond_work_cancel_all(bond);
- bond_remove_proc_entry(bond);
-
bond_debug_unregister(bond);
__hw_addr_flush(&bond->mc_list);
bond_set_lockdep_class(bond_dev);
- bond_create_proc_entry(bond);
list_add_tail(&bond->bond_list, &bn->dev_list);
bond_prepare_sysfs_group(bond);
if ((phy_data & BMSR_LSTATUS) == 0) {
/* link down */
netif_carrier_off(netdev);
- netif_stop_queue(netdev);
hw->hibernate = true;
if (atl1c_reset_mac(hw) != 0)
if (netif_msg_hw(adapter))
dma_unmap_single(bp->sdev->dma_dev, mapping,
RX_PKT_BUF_SZ, DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
- skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA);
+ skb = alloc_skb(RX_PKT_BUF_SZ, GFP_ATOMIC | GFP_DMA);
if (skb == NULL)
return -ENOMEM;
mapping = dma_map_single(bp->sdev->dma_dev, skb->data,
dma_unmap_single(bp->sdev->dma_dev, mapping, len,
DMA_TO_DEVICE);
- bounce_skb = __netdev_alloc_skb(dev, len, GFP_ATOMIC | GFP_DMA);
+ bounce_skb = alloc_skb(len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb)
goto err_out;
int k, last;
if (skb == NULL) {
- j++;
+ j = NEXT_TX_BD(j);
continue;
}
tx_buf->skb = NULL;
last = tx_buf->nr_frags;
- j++;
- for (k = 0; k < last; k++, j++) {
+ j = NEXT_TX_BD(j);
+ for (k = 0; k < last; k++, j = NEXT_TX_BD(j)) {
tx_buf = &txr->tx_buf_ring[TX_RING_IDX(j)];
dma_unmap_page(&bp->pdev->dev,
dma_unmap_addr(tx_buf, mapping),
}
if (atomic_read(&ulp_ops->ref_count) != 0)
- netdev_warn(dev->netdev, "Failed waiting for ref count to go to zero\n");
+ pr_warn("%s: Failed waiting for ref count to go to zero\n",
+ __func__);
return 0;
out_unlock:
uinfo = &udev->cnic_uinfo;
- uinfo->mem[0].addr = dev->netdev->base_addr;
+ uinfo->mem[0].addr = pci_resource_start(dev->pcidev, 0);
uinfo->mem[0].internal_addr = dev->regview;
- uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
uinfo->mem[0].memtype = UIO_MEM_PHYS;
if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+ uinfo->mem[0].size = MB_GET_CID_ADDR(TX_TSS_CID +
+ TX_MAX_TSS_RINGS + 1);
uinfo->mem[1].addr = (unsigned long) cp->status_blk.gen &
PAGE_MASK;
if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
uinfo->name = "bnx2_cnic";
} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+ uinfo->mem[0].size = pci_resource_len(dev->pcidev, 0);
+
uinfo->mem[1].addr = (unsigned long) cp->bnx2x_def_status_blk &
PAGE_MASK;
uinfo->mem[1].size = sizeof(*cp->bnx2x_def_status_blk);
return NETDEV_TX_OK;
}
- /* Steal sock reference for processing TX time stamps */
- swap(skb_new->sk, skb->sk);
- swap(skb_new->destructor, skb->destructor);
- kfree_skb(skb);
+ if (skb->sk)
+ skb_set_owner_w(skb_new, skb->sk);
+ consume_skb(skb);
skb = skb_new;
}
ctrl = er32(CTRL);
status = er32(STATUS);
rxcw = er32(RXCW);
+ /* SYNCH bit and IV bit are sticky */
+ udelay(10);
+ rxcw = er32(RXCW);
if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
**/
static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
{
- u16 phy_reg;
- u32 phy_id;
+ u16 phy_reg = 0;
+ u32 phy_id = 0;
+ s32 ret_val;
+ u16 retry_count;
+
+ for (retry_count = 0; retry_count < 2; retry_count++) {
+ ret_val = e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
+ if (ret_val || (phy_reg == 0xFFFF))
+ continue;
+ phy_id = (u32)(phy_reg << 16);
- e1e_rphy_locked(hw, PHY_ID1, &phy_reg);
- phy_id = (u32)(phy_reg << 16);
- e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
- phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+ ret_val = e1e_rphy_locked(hw, PHY_ID2, &phy_reg);
+ if (ret_val || (phy_reg == 0xFFFF)) {
+ phy_id = 0;
+ continue;
+ }
+ phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+ break;
+ }
if (hw->phy.id) {
if (hw->phy.id == phy_id)
return true;
- } else {
- if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK))
- hw->phy.id = phy_id;
+ } else if (phy_id) {
+ hw->phy.id = phy_id;
+ hw->phy.revision = (u32)(phy_reg & ~PHY_REVISION_MASK);
return true;
}
- return false;
+ /*
+ * In case the PHY needs to be in mdio slow mode,
+ * set slow mode and try to get the PHY id again.
+ */
+ hw->phy.ops.release(hw);
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (!ret_val)
+ ret_val = e1000e_get_phy_id(hw);
+ hw->phy.ops.acquire(hw);
+
+ return !ret_val;
}
/**
return -EINVAL;
}
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ e_err(drv, "Enable failed, SR-IOV enabled\n");
+ return -EINVAL;
+ }
+
/* Hardware supports up to 8 traffic classes */
if (tc > adapter->dcb_cfg.num_tcs.pg_tcs ||
(hw->mac.type == ixgbe_mac_82598EB &&
unsigned int i, eop, count = 0;
unsigned int total_bytes = 0, total_packets = 0;
+ if (test_bit(__IXGBEVF_DOWN, &adapter->state))
+ return true;
+
i = tx_ring->next_to_clean;
eop = tx_ring->tx_buffer_info[i].next_to_watch;
eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
for (i = 0; i < q_vector->txr_count; i++) {
tx_ring = &(adapter->tx_ring[r_idx]);
- tx_ring->total_bytes = 0;
- tx_ring->total_packets = 0;
ixgbevf_clean_tx_irq(adapter, tx_ring);
r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
r_idx + 1);
struct ixgbe_hw *hw = &adapter->hw;
struct ixgbevf_ring *rx_ring;
int r_idx;
- int i;
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rxr_count; i++) {
- rx_ring = &(adapter->rx_ring[r_idx]);
- rx_ring->total_bytes = 0;
- rx_ring->total_packets = 0;
- r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
- r_idx + 1);
- }
if (!q_vector->rxr_count)
return IRQ_HANDLED;
desc->des3 = desc->des2 + BUF_SIZE_4KiB;
priv->hw->desc->prepare_tx_desc(desc, 1, bmax,
csum);
-
+ wmb();
entry = (++priv->cur_tx) % txsize;
desc = priv->dma_tx + entry;
len, DMA_TO_DEVICE);
desc->des3 = desc->des2 + BUF_SIZE_4KiB;
priv->hw->desc->prepare_tx_desc(desc, 0, len, csum);
+ wmb();
priv->hw->desc->set_tx_owner(desc);
priv->tx_skbuff[entry] = NULL;
} else {
priv->hw->desc->prepare_tx_desc(desc, 0, len, csum_insertion);
wmb();
priv->hw->desc->set_tx_owner(desc);
+ wmb();
}
/* Interrupt on completition only for the latest segment */
/* To avoid raise condition */
priv->hw->desc->set_tx_owner(first);
+ wmb();
priv->cur_tx++;
}
wmb();
priv->hw->desc->set_rx_owner(p + entry);
+ wmb();
}
}
}
lsr = STLSR;
}
- si->last_oscr = OSCR;
+ si->last_oscr = readl_relaxed(OSCR);
break;
case 0x04: /* Received Data Available */
dev->stats.rx_bytes++;
async_unwrap_char(dev, &dev->stats, &si->rx_buff, STRBR);
} while (STLSR & LSR_DR);
- si->last_oscr = OSCR;
+ si->last_oscr = readl_relaxed(OSCR);
break;
case 0x02: /* Transmit FIFO Data Request */
/* We need to ensure that the transmitter has finished. */
while ((STLSR & LSR_TEMT) == 0)
cpu_relax();
- si->last_oscr = OSCR;
+ si->last_oscr = readl_relaxed(OSCR);
/*
* Ok, we've finished transmitting. Now enable
while (ICSR1 & ICSR1_TBY)
cpu_relax();
- si->last_oscr = OSCR;
+ si->last_oscr = readl_relaxed(OSCR);
/*
* HACK: It looks like the TBY bit is dropped too soon.
/* stop RX DMA */
DCSR(si->rxdma) &= ~DCSR_RUN;
- si->last_oscr = OSCR;
+ si->last_oscr = readl_relaxed(OSCR);
icsr0 = ICSR0;
if (icsr0 & (ICSR0_FRE | ICSR0_RAB)) {
skb_copy_from_linear_data(skb, si->dma_tx_buff, skb->len);
if (mtt)
- while ((unsigned)(OSCR - si->last_oscr)/4 < mtt)
+ while ((unsigned)(readl_relaxed(OSCR) - si->last_oscr)/4 < mtt)
cpu_relax();
/* stop RX DMA, disable FICP */
struct mdio_mux_parent_bus *pb = cb->parent;
int r;
- mutex_lock(&pb->mii_bus->mdio_lock);
+ /* In theory multiple mdio_mux could be stacked, thus creating
+ * more than a single level of nesting. But in practice,
+ * SINGLE_DEPTH_NESTING will cover the vast majority of use
+ * cases. We use it, instead of trying to handle the general
+ * case.
+ */
+ mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
if (r)
goto out;
int r;
- mutex_lock(&pb->mii_bus->mdio_lock);
+ mutex_lock_nested(&pb->mii_bus->mdio_lock, SINGLE_DEPTH_NESTING);
r = pb->switch_fn(pb->current_child, cb->bus_number, pb->switch_data);
if (r)
goto out;
.data = BIT(1), /* interface whitelist bitmap */
};
+static const struct driver_info qmi_wwan_force_int2 = {
+ .description = "Qualcomm WWAN/QMI device",
+ .flags = FLAG_WWAN,
+ .bind = qmi_wwan_bind_shared,
+ .unbind = qmi_wwan_unbind_shared,
+ .manage_power = qmi_wwan_manage_power,
+ .data = BIT(2), /* interface whitelist bitmap */
+};
+
static const struct driver_info qmi_wwan_force_int3 = {
.description = "Qualcomm WWAN/QMI device",
.flags = FLAG_WWAN,
.bInterfaceProtocol = 0xff,
.driver_info = (unsigned long)&qmi_wwan_force_int4,
},
+ { /* ZTE MF60 */
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x19d2,
+ .idProduct = 0x1402,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0xff,
+ .bInterfaceProtocol = 0xff,
+ .driver_info = (unsigned long)&qmi_wwan_force_int2,
+ },
{ /* Sierra Wireless MC77xx in QMI mode */
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
.idVendor = 0x1199,
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
/* create a bounce buffer in zone_dma on mapping failure. */
if (b43legacy_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
- bounce_skb = __dev_alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
+ bounce_skb = alloc_skb(skb->len, GFP_ATOMIC | GFP_DMA);
if (!bounce_skb) {
ring->current_slot = old_top_slot;
ring->used_slots = old_used_slots;
return 0;
}
- if (il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET) {
+ if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) {
IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx,
key_flags);
spin_unlock_irqrestore(&il->sta_lock, flags);
memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
il->stations[sta_id].sta.key.key_flags =
STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
- il->stations[sta_id].sta.key.key_offset = WEP_INVALID_OFFSET;
+ il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx;
il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
return;
/* monitor and check for other stuck queues */
- if (il_is_any_associated(il)) {
- for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) {
- /* skip as we already checked the command queue */
- if (cnt == il->cmd_queue)
- continue;
- if (il_check_stuck_queue(il, cnt))
- return;
- }
+ for (cnt = 0; cnt < il->hw_params.max_txq_num; cnt++) {
+ /* skip as we already checked the command queue */
+ if (cnt == il->cmd_queue)
+ continue;
+ if (il_check_stuck_queue(il, cnt))
+ return;
}
mod_timer(&il->watchdog,
case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
/* firmware doesn't support this type of hidden SSID */
default:
+ kfree(bss_cfg);
return -EINVAL;
}
case QID_RX:
if (!rt2x00queue_full(queue))
rt2x00queue_for_each_entry(queue,
- Q_INDEX_DONE,
Q_INDEX,
+ Q_INDEX_DONE,
NULL,
rt2x00usb_kick_rx_entry);
break;
}
EXPORT_SYMBOL(of_find_node_with_property);
-static const struct of_device_id *of_match_compat(const struct of_device_id *matches,
- const char *compat)
-{
- while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
- const char *cp = matches->compatible;
- int len = strlen(cp);
-
- if (len > 0 && of_compat_cmp(compat, cp, len) == 0)
- return matches;
-
- matches++;
- }
-
- return NULL;
-}
-
/**
* of_match_node - Tell if an device_node has a matching of_match structure
* @matches: array of of device match structures to search in
const struct of_device_id *of_match_node(const struct of_device_id *matches,
const struct device_node *node)
{
- struct property *prop;
- const char *cp;
-
if (!matches)
return NULL;
- of_property_for_each_string(node, "compatible", prop, cp) {
- const struct of_device_id *match = of_match_compat(matches, cp);
- if (match)
- return match;
- }
-
while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
int match = 1;
if (matches->name[0])
if (matches->type[0])
match &= node->type
&& !strcmp(matches->type, node->type);
- if (match && !matches->compatible[0])
+ if (matches->compatible[0])
+ match &= of_device_is_compatible(node,
+ matches->compatible);
+ if (match)
return matches;
matches++;
}
for(; lookup->compatible != NULL; lookup++) {
if (!of_device_is_compatible(np, lookup->compatible))
continue;
- if (of_address_to_resource(np, 0, &res))
- continue;
- if (res.start != lookup->phys_addr)
- continue;
+ if (!of_address_to_resource(np, 0, &res))
+ if (res.start != lookup->phys_addr)
+ continue;
pr_debug("%s: devname=%s\n", np->full_name, lookup->name);
return lookup;
}
pci_pm_set_unknown_state(pci_dev);
+ /*
+ * Some BIOSes from ASUS have a bug: If a USB EHCI host controller's
+ * PCI COMMAND register isn't 0, the BIOS assumes that the controller
+ * hasn't been quiesced and tries to turn it off. If the controller
+ * is already in D3, this can hang or cause memory corruption.
+ *
+ * Since the value of the COMMAND register doesn't matter once the
+ * device has been suspended, we can safely set it to 0 here.
+ */
+ if (pci_dev->class == PCI_CLASS_SERIAL_USB_EHCI)
+ pci_write_config_word(pci_dev, PCI_COMMAND, 0);
+
return 0;
}
if (target_state == PCI_POWER_ERROR)
return -EIO;
- /* Some devices mustn't be in D3 during system sleep */
- if (target_state == PCI_D3hot &&
- (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP))
- return 0;
-
pci_enable_wake(dev, target_state, device_may_wakeup(&dev->dev));
error = pci_set_power_state(dev, target_state);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
-/*
- * The Intel 6 Series/C200 Series chipset's EHCI controllers on many
- * ASUS motherboards will cause memory corruption or a system crash
- * if they are in D3 while the system is put into S3 sleep.
- */
-static void __devinit asus_ehci_no_d3(struct pci_dev *dev)
-{
- const char *sys_info;
- static const char good_Asus_board[] = "P8Z68-V";
-
- if (dev->dev_flags & PCI_DEV_FLAGS_NO_D3_DURING_SLEEP)
- return;
- if (dev->subsystem_vendor != PCI_VENDOR_ID_ASUSTEK)
- return;
- sys_info = dmi_get_system_info(DMI_BOARD_NAME);
- if (sys_info && memcmp(sys_info, good_Asus_board,
- sizeof(good_Asus_board) - 1) == 0)
- return;
-
- dev_info(&dev->dev, "broken D3 during system sleep on ASUS\n");
- dev->dev_flags |= PCI_DEV_FLAGS_NO_D3_DURING_SLEEP;
- device_set_wakeup_capable(&dev->dev, false);
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c26, asus_ehci_no_d3);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1c2d, asus_ehci_no_d3);
-
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
{
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
grp->configs[j] = config & ~IMX_PAD_SION;
}
+#ifdef DEBUG
IMX_PMX_DUMP(info, grp->pins, grp->mux_mode, grp->configs, grp->npins);
+#endif
return 0;
}
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__GPIO_1_12 */
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__SJC_DONE */
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 */
+ IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 0, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID */
+ IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
};
/* Pad names for the pinmux subsystem */
static int __devinit ideapad_acpi_add(struct acpi_device *adevice)
{
int ret, i;
- unsigned long cfg;
+ int cfg;
struct ideapad_private *priv;
- if (read_method_int(adevice->handle, "_CFG", (int *)&cfg))
+ if (read_method_int(adevice->handle, "_CFG", &cfg))
return -ENODEV;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
goto input_failed;
for (i = 0; i < IDEAPAD_RFKILL_DEV_NUM; i++) {
- if (test_bit(ideapad_rfk_data[i].cfgbit, &cfg))
+ if (test_bit(ideapad_rfk_data[i].cfgbit, &priv->cfg))
ideapad_register_rfkill(adevice, i);
else
priv->rfk[i] = NULL;
#include <linux/string.h>
#include <linux/tick.h>
#include <linux/timer.h>
+#include <linux/dmi.h>
#include <drm/i915_drm.h>
#include <asm/msr.h>
#include <asm/processor.h>
MODULE_DEVICE_TABLE(pci, ips_id_table);
+static int ips_blacklist_callback(const struct dmi_system_id *id)
+{
+ pr_info("Blacklisted intel_ips for %s\n", id->ident);
+ return 1;
+}
+
+static const struct dmi_system_id ips_blacklist[] = {
+ {
+ .callback = ips_blacklist_callback,
+ .ident = "HP ProBook",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP ProBook"),
+ },
+ },
+ { } /* terminating entry */
+};
+
static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
u64 platform_info;
u16 htshi, trc, trc_required_mask;
u8 tse;
+ if (dmi_check_system(ips_blacklist))
+ return -ENODEV;
+
ips = kzalloc(sizeof(struct ips_driver), GFP_KERNEL);
if (!ips)
return -ENOMEM;
struct device_attribute *attr,
const char *buffer, size_t count)
{
- unsigned long value = 0;
+ int value;
int ret = 0;
struct sony_nc_value *item =
container_of(attr, struct sony_nc_value, devattr);
if (count > 31)
return -EINVAL;
- if (kstrtoul(buffer, 10, &value))
+ if (kstrtoint(buffer, 10, &value))
return -EINVAL;
if (item->validate)
return value;
ret = sony_nc_int_call(sony_nc_acpi_handle, *item->acpiset,
- (int *)&value, NULL);
+ &value, NULL);
if (ret < 0)
return -EIO;
struct sony_backlight_props {
struct backlight_device *dev;
int handle;
+ int cmd_base;
u8 offset;
u8 maxlvl;
};
struct sony_backlight_props *sdev =
(struct sony_backlight_props *)bl_get_data(bd);
- sony_call_snc_handle(sdev->handle, 0x0200, &result);
+ sony_call_snc_handle(sdev->handle, sdev->cmd_base + 0x100, &result);
return (result & 0xff) - sdev->offset;
}
(struct sony_backlight_props *)bl_get_data(bd);
value = bd->props.brightness + sdev->offset;
- if (sony_call_snc_handle(sdev->handle, 0x0100 | (value << 16), &result))
+ if (sony_call_snc_handle(sdev->handle, sdev->cmd_base | (value << 0x10),
+ &result))
return -EIO;
return value;
/*
* ACPI callbacks
*/
+enum event_types {
+ HOTKEY = 1,
+ KILLSWITCH,
+ GFX_SWITCH
+};
static void sony_nc_notify(struct acpi_device *device, u32 event)
{
u32 real_ev = event;
/* hotkey event */
case 0x0100:
case 0x0127:
- ev_type = 1;
+ ev_type = HOTKEY;
real_ev = sony_nc_hotkeys_decode(event, handle);
if (real_ev > 0)
* update the rfkill device status when the
* switch is moved.
*/
- ev_type = 2;
+ ev_type = KILLSWITCH;
sony_call_snc_handle(handle, 0x0100, &result);
real_ev = result & 0x03;
break;
+ case 0x0128:
+ case 0x0146:
+ /* Hybrid GFX switching */
+ sony_call_snc_handle(handle, 0x0000, &result);
+ dprintk("GFX switch event received (reason: %s)\n",
+ (result & 0x01) ?
+ "switch change" : "unknown");
+
+ /* verify the switch state
+ * 1: discrete GFX
+ * 0: integrated GFX
+ */
+ sony_call_snc_handle(handle, 0x0100, &result);
+
+ ev_type = GFX_SWITCH;
+ real_ev = result & 0xff;
+ break;
+
default:
dprintk("Unknown event 0x%x for handle 0x%x\n",
event, handle);
} else {
/* old style event */
- ev_type = 1;
+ ev_type = HOTKEY;
sony_laptop_report_input_event(real_ev);
}
* bits 4,5: store the limit into the EC
* bits 6,7: store the limit into the battery
*/
+ cmd = 0;
- /*
- * handle 0x0115 should allow storing on battery too;
- * handle 0x0136 same as 0x0115 + health status;
- * handle 0x013f, same as 0x0136 but no storing on the battery
- *
- * Store only inside the EC for now, regardless the handle number
- */
- if (value == 0)
- /* disable limits */
- cmd = 0x0;
+ if (value > 0) {
+ if (value <= 50)
+ cmd = 0x20;
- else if (value <= 50)
- cmd = 0x21;
+ else if (value <= 80)
+ cmd = 0x10;
- else if (value <= 80)
- cmd = 0x11;
+ else if (value <= 100)
+ cmd = 0x30;
- else if (value <= 100)
- cmd = 0x31;
+ else
+ return -EINVAL;
- else
- return -EINVAL;
+ /*
+ * handle 0x0115 should allow storing on battery too;
+ * handle 0x0136 same as 0x0115 + health status;
+ * handle 0x013f, same as 0x0136 but no storing on the battery
+ */
+ if (bcare_ctl->handle != 0x013f)
+ cmd = cmd | (cmd << 2);
- if (sony_call_snc_handle(bcare_ctl->handle, (cmd << 0x10) | 0x0100,
- &result))
+ cmd = (cmd | 0x1) << 0x10;
+ }
+
+ if (sony_call_snc_handle(bcare_ctl->handle, cmd | 0x0100, &result))
return -EIO;
return count;
struct device_attribute *attr, char *buffer)
{
ssize_t count = 0;
- unsigned int mode = sony_nc_thermal_mode_get();
+ int mode = sony_nc_thermal_mode_get();
if (mode < 0)
return mode;
{
u64 offset;
int i;
+ int lvl_table_len = 0;
u8 min = 0xff, max = 0x00;
unsigned char buffer[32] = { 0 };
props->maxlvl = 0xff;
offset = sony_find_snc_handle(handle);
- if (offset < 0)
- return;
/* try to read the boundaries from ACPI tables, if we fail the above
* defaults should be reasonable
if (i < 0)
return;
+ switch (handle) {
+ case 0x012f:
+ case 0x0137:
+ lvl_table_len = 9;
+ break;
+ case 0x143:
+ lvl_table_len = 16;
+ break;
+ }
+
/* the buffer lists brightness levels available, brightness levels are
* from position 0 to 8 in the array, other values are used by ALS
* control.
*/
- for (i = 0; i < 9 && i < ARRAY_SIZE(buffer); i++) {
+ for (i = 0; i < lvl_table_len && i < ARRAY_SIZE(buffer); i++) {
dprintk("Brightness level: %d\n", buffer[i]);
const struct backlight_ops *ops = NULL;
struct backlight_properties props;
- if (sony_find_snc_handle(0x12f) != -1) {
+ if (sony_find_snc_handle(0x12f) >= 0) {
ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x0100;
sony_nc_backlight_ng_read_limits(0x12f, &sony_bl_props);
max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
- } else if (sony_find_snc_handle(0x137) != -1) {
+ } else if (sony_find_snc_handle(0x137) >= 0) {
ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x0100;
sony_nc_backlight_ng_read_limits(0x137, &sony_bl_props);
max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
+ } else if (sony_find_snc_handle(0x143) >= 0) {
+ ops = &sony_backlight_ng_ops;
+ sony_bl_props.cmd_base = 0x3000;
+ sony_nc_backlight_ng_read_limits(0x143, &sony_bl_props);
+ max_brightness = sony_bl_props.maxlvl - sony_bl_props.offset;
+
} else if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "GBRT",
&unused))) {
ops = &sony_backlight_ops;
}
}
+ result = sony_laptop_setup_input(device);
+ if (result) {
+ pr_err("Unable to create input devices\n");
+ goto outplatform;
+ }
+
if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "ECON",
&handle))) {
int arg = 1;
}
/* setup input devices and helper fifo */
- result = sony_laptop_setup_input(device);
- if (result) {
- pr_err("Unable to create input devices\n");
- goto outsnc;
- }
-
if (acpi_video_backlight_support()) {
pr_info("brightness ignored, must be controlled by ACPI video driver\n");
} else {
return 0;
- out_sysfs:
+out_sysfs:
for (item = sony_nc_values; item->name; ++item) {
device_remove_file(&sony_pf_device->dev, &item->devattr);
}
sony_nc_backlight_cleanup();
-
- sony_laptop_remove_input();
-
- outsnc:
sony_nc_function_cleanup(sony_pf_device);
sony_nc_handles_cleanup(sony_pf_device);
- outpresent:
+outplatform:
+ sony_laptop_remove_input();
+
+outpresent:
sony_pf_remove();
- outwalk:
+outwalk:
sony_nc_rfkill_cleanup();
return result;
}
{
struct regulator_dev *rdev = regulator->rdev;
struct regulator *consumer;
- int ret, output_uV, input_uV, total_uA_load = 0;
+ int ret, output_uV, input_uV = 0, total_uA_load = 0;
unsigned int mode;
+ if (rdev->supply)
+ input_uV = regulator_get_voltage(rdev->supply);
+
mutex_lock(&rdev->mutex);
/*
goto out;
}
- /* get input voltage */
- input_uV = 0;
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
+ /* No supply? Use constraint voltage */
if (input_uV <= 0)
input_uV = rdev->constraints->input_uV;
if (input_uV <= 0) {
config REMOTEPROC
tristate
depends on EXPERIMENTAL
+ select FW_CONFIG
config OMAP_REMOTEPROC
tristate "OMAP remoteproc support"
+ depends on EXPERIMENTAL
depends on ARCH_OMAP4
depends on OMAP_IOMMU
select REMOTEPROC
rpdev->id.name);
}
+/**
+ * __ept_release() - deallocate an rpmsg endpoint
+ * @kref: the ept's reference count
+ *
+ * This function deallocates an ept, and is invoked when its @kref refcount
+ * drops to zero.
+ *
+ * Never invoke this function directly!
+ */
+static void __ept_release(struct kref *kref)
+{
+ struct rpmsg_endpoint *ept = container_of(kref, struct rpmsg_endpoint,
+ refcount);
+ /*
+ * At this point no one holds a reference to ept anymore,
+ * so we can directly free it
+ */
+ kfree(ept);
+}
+
/* for more info, see below documentation of rpmsg_create_ept() */
static struct rpmsg_endpoint *__rpmsg_create_ept(struct virtproc_info *vrp,
struct rpmsg_channel *rpdev, rpmsg_rx_cb_t cb,
return NULL;
}
+ kref_init(&ept->refcount);
+ mutex_init(&ept->cb_lock);
+
ept->rpdev = rpdev;
ept->cb = cb;
ept->priv = priv;
idr_remove(&vrp->endpoints, request);
free_ept:
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ kref_put(&ept->refcount, __ept_release);
return NULL;
}
static void
__rpmsg_destroy_ept(struct virtproc_info *vrp, struct rpmsg_endpoint *ept)
{
+ /* make sure new inbound messages can't find this ept anymore */
mutex_lock(&vrp->endpoints_lock);
idr_remove(&vrp->endpoints, ept->addr);
mutex_unlock(&vrp->endpoints_lock);
- kfree(ept);
+ /* make sure in-flight inbound messages won't invoke cb anymore */
+ mutex_lock(&ept->cb_lock);
+ ept->cb = NULL;
+ mutex_unlock(&ept->cb_lock);
+
+ kref_put(&ept->refcount, __ept_release);
}
/**
/* use the dst addr to fetch the callback of the appropriate user */
mutex_lock(&vrp->endpoints_lock);
+
ept = idr_find(&vrp->endpoints, msg->dst);
+
+ /* let's make sure no one deallocates ept while we use it */
+ if (ept)
+ kref_get(&ept->refcount);
+
mutex_unlock(&vrp->endpoints_lock);
- if (ept && ept->cb)
- ept->cb(ept->rpdev, msg->data, msg->len, ept->priv, msg->src);
- else
+ if (ept) {
+ /* make sure ept->cb doesn't go away while we use it */
+ mutex_lock(&ept->cb_lock);
+
+ if (ept->cb)
+ ept->cb(ept->rpdev, msg->data, msg->len, ept->priv,
+ msg->src);
+
+ mutex_unlock(&ept->cb_lock);
+
+ /* farewell, ept, we don't need you anymore */
+ kref_put(&ept->refcount, __ept_release);
+ } else
dev_warn(dev, "msg received with no recepient\n");
/* publish the real size of the buffer */
return ret;
}
-module_init(rpmsg_init);
+subsys_initcall(rpmsg_init);
static void __exit rpmsg_fini(void)
{
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/delay.h>
+#include <linux/of.h>
#define AB8500_RTC_SOFF_STAT_REG 0x00
#define AB8500_RTC_CC_CONF_REG 0x01
}
err = request_threaded_irq(irq, NULL, rtc_alarm_handler,
- IRQF_NO_SUSPEND, "ab8500-rtc", rtc);
+ IRQF_NO_SUSPEND | IRQF_ONESHOT, "ab8500-rtc", rtc);
if (err < 0) {
rtc_device_unregister(rtc);
return err;
platform_set_drvdata(pdev, rtc);
-
err = ab8500_sysfs_rtc_register(&pdev->dev);
if (err) {
dev_err(&pdev->dev, "sysfs RTC failed to register\n");
return 0;
}
+static const struct of_device_id ab8500_rtc_match[] = {
+ { .compatible = "stericsson,ab8500-rtc", },
+ {}
+};
+
static struct platform_driver ab8500_rtc_driver = {
.driver = {
.name = "ab8500-rtc",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_rtc_match,
},
.probe = ab8500_rtc_probe,
.remove = __devexit_p(ab8500_rtc_remove),
struct platform_device *pdev = dev_id;
struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
void __iomem *ioaddr = pdata->ioaddr;
+ unsigned long flags;
u32 status;
u32 events = 0;
- spin_lock_irq(&pdata->rtc->irq_lock);
+ spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
/* clear interrupt sources */
writew(status, ioaddr + RTC_RTCISR);
events |= (RTC_PF | RTC_IRQF);
rtc_update_irq(pdata->rtc, 1, events);
- spin_unlock_irq(&pdata->rtc->irq_lock);
+ spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
return IRQ_HANDLED;
}
clk_disable(config->clk);
clk_put(config->clk);
iounmap(config->ioaddr);
- kfree(config);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res)
release_mem_region(res->start, resource_size(res));
platform_set_drvdata(pdev, NULL);
rtc_device_unregister(config->rtc);
+ kfree(config);
return 0;
}
}
ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
- IRQF_TRIGGER_RISING,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
dev_name(&rtc->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
resp->frame_len = le16_to_cpu(*(__le16 *)(r+6));
- memcpy(&resp->ending_fis[0], r+16, 24);
+ memcpy(&resp->ending_fis[0], r+16, ATA_RESP_FIS_SIZE);
ts->buf_valid_size = sizeof(*resp);
}
}
struct pci_dev *pcidev;
struct net_device *netdev;
void __iomem *regview;
+ resource_size_t reg_base;
u32 age;
unsigned long cnic_dev_type;
goto arm_cq;
}
- reg_base = ep->hba->netdev->base_addr;
if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
(ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
/* 5709 device in normal node and 5706/5708 devices */
reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
- ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+ ep->qp.ctx_base = ioremap_nocache(ep->hba->reg_base + reg_off,
MB_KERNEL_CTX_SIZE);
if (!ep->qp.ctx_base)
return -ENOMEM;
bnx2i_identify_device(hba);
bnx2i_setup_host_queue_size(hba, shost);
+ hba->reg_base = pci_resource_start(hba->pcidev, 0);
if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
- hba->regview = ioremap_nocache(hba->netdev->base_addr,
- BNX2_MQ_CONFIG2);
+ hba->regview = pci_iomap(hba->pcidev, 0, BNX2_MQ_CONFIG2);
if (!hba->regview)
goto ioreg_map_err;
} else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
- hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+ hba->regview = pci_iomap(hba->pcidev, 0, 4096);
if (!hba->regview)
goto ioreg_map_err;
}
bnx2i_free_mp_bdt(hba);
mp_bdt_mem_err:
if (hba->regview) {
- iounmap(hba->regview);
+ pci_iounmap(hba->pcidev, hba->regview);
hba->regview = NULL;
}
ioreg_map_err:
pci_dev_put(hba->pcidev);
if (hba->regview) {
- iounmap(hba->regview);
+ pci_iounmap(hba->pcidev, hba->regview);
hba->regview = NULL;
}
bnx2i_free_mp_bdt(hba);
if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
((stat->stat == SAM_STAT_CHECK_CONDITION &&
dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
- ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
+ memcpy(dev->sata_dev.fis, resp->ending_fis, ATA_RESP_FIS_SIZE);
if (!link->sactive) {
- qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ qc->err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
} else {
- link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.tf.command);
+ link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.fis[2]);
if (unlikely(link->eh_info.err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
}
qc->flags |= ATA_QCFLAG_FAILED;
}
- dev->sata_dev.tf.feature = 0x04; /* status err */
- dev->sata_dev.tf.command = ATA_ERR;
+ dev->sata_dev.fis[3] = 0x04; /* status err */
+ dev->sata_dev.fis[2] = ATA_ERR;
}
}
{
struct domain_device *dev = qc->ap->private_data;
- memcpy(&qc->result_tf, &dev->sata_dev.tf, sizeof(qc->result_tf));
+ ata_tf_from_fis(dev->sata_dev.fis, &qc->result_tf);
return true;
}
* and might not yet have reached the scsi async scanning
*/
wait_for_device_probe();
- /*
- * and then we wait for the actual asynchronous scsi scan
- * to finish.
- */
- scsi_complete_async_scans();
return 0;
}
if (num_blocks != 0)
range = num_blocks;
else
- range = (dev->transport->get_blocks(dev) - lba);
+ range = (dev->transport->get_blocks(dev) - lba) + 1;
pr_debug("WRITE_SAME UNMAP: LBA: %llu Range: %llu\n",
(unsigned long long)lba, (unsigned long long)range);
if (IS_ERR(file) || !file || !file->f_dentry) {
pr_err("filp_open(%s) for APTPL metadata"
" failed\n", path);
- return (PTR_ERR(file) < 0 ? PTR_ERR(file) : -ENOENT);
+ return IS_ERR(file) ? PTR_ERR(file) : -ENOENT;
}
iov[0].iov_base = &buf[0];
" SPC-2 reservation is held, returning"
" RESERVATION_CONFLICT\n");
cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT;
- ret = EINVAL;
+ ret = -EINVAL;
goto out;
}
*/
if (!cmd->se_sess) {
cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (cmd->data_length < 24) {
{
struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
+ if (cmd->aborted)
+ return ~0;
return fc_seq_exch(cmd->seq)->rxid;
}
}
#ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW
-void __init udbg_init_debug_opal(void)
+void __init udbg_init_debug_opal_raw(void)
{
u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
hvc_opal_privs[index] = &hvc_opal_boot_priv;
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/sizes.h>
#include <asm/io.h>
-#include <asm/sizes.h>
#define UART_NR 14
goto retry;
}
if (!desc->reslength) { /* zero length read */
+ dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
+ clear_bit(WDM_READ, &desc->flags);
spin_unlock_irq(&desc->iuspin);
goto retry;
}
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
-/* Is a USB 3.0 port in the Inactive state? */
-static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
{
return hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_SS_INACTIVE;
+ (((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_SS_INACTIVE) ||
+ ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_COMP_MOD)) ;
}
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
*
* See https://bugzilla.kernel.org/show_bug.cgi?id=41752
*/
- if (hub_port_inactive(hub, portstatus)) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
int ret;
if ((portchange & USB_PORT_STAT_C_CONNECTION))
/* Warm reset a USB3 protocol port if it's in
* SS.Inactive state.
*/
- if (hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE)
- == USB_SS_PORT_LS_SS_INACTIVE) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
dev_dbg(hub_dev, "warm reset port %d\n", i);
hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
}
}
+ /* Hold PHYs in reset while initializing EHCI controller */
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0);
if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0);
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
ehci_reset(omap_ehci);
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret) {
+ dev_err(dev, "failed to add hcd with err %d\n", ret);
+ goto err_add_hcd;
+ }
if (pdata->phy_reset) {
/* Hold the PHY in RESET for enough time till
gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret) {
- dev_err(dev, "failed to add hcd with err %d\n", ret);
- goto err_add_hcd;
- }
-
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
}
}
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+{
+ u32 pls = status_reg & PORT_PLS_MASK;
+
+ /* resume state is a xHCI internal state.
+ * Do not report it to usb core.
+ */
+ if (pls == XDEV_RESUME)
+ return;
+
+ /* When the CAS bit is set then warm reset
+ * should be performed on port
+ */
+ if (status_reg & PORT_CAS) {
+ /* The CAS bit can be set while the port is
+ * in any link state.
+ * Only roothubs have CAS bit, so we
+ * pretend to be in compliance mode
+ * unless we're already in compliance
+ * or the inactive state.
+ */
+ if (pls != USB_SS_PORT_LS_COMP_MOD &&
+ pls != USB_SS_PORT_LS_SS_INACTIVE) {
+ pls = USB_SS_PORT_LS_COMP_MOD;
+ }
+ /* Return also connection bit -
+ * hub state machine resets port
+ * when this bit is set.
+ */
+ pls |= USB_PORT_STAT_CONNECTION;
+ }
+ /* update status field */
+ *status |= pls;
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
else
status |= USB_PORT_STAT_POWER;
}
- /* Port Link State */
+ /* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- /* resume state is a xHCI internal state.
- * Do not report it to usb core.
- */
- if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
- status |= (temp & PORT_PLS_MASK);
+ xhci_hub_report_link_state(&status, temp);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
num_trbs_free_temp = ep_ring->num_trbs_free;
dequeue_temp = ep_ring->dequeue;
+ /* If we get two back-to-back stalls, and the first stalled transfer
+ * ends just before a link TRB, the dequeue pointer will be left on
+ * the link TRB by the code in the while loop. So we have to update
+ * the dequeue pointer one segment further, or we'll jump off
+ * the segment into la-la-land.
+ */
+ if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
+ ep_ring->deq_seg = ep_ring->deq_seg->next;
+ ep_ring->dequeue = ep_ring->deq_seg->trbs;
+ }
+
while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
/* We have more usable TRBs */
ep_ring->num_trbs_free++;
#define PORT_PLC (1 << 22)
/* port configure error change - port failed to configure its link partner */
#define PORT_CEC (1 << 23)
-/* bit 24 reserved */
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS (1 << 24)
/* wake on connect (enable) */
#define PORT_WKCONN_E (1 << 25)
/* wake on disconnect (enable) */
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Clear the urb pipe. */
usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
+#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
+#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
+#define MEDIATEK_PRODUCT_7208_1COM 0x7101
+#define MEDIATEK_PRODUCT_7208_2COM 0x7102
+#define MEDIATEK_PRODUCT_FP_1COM 0x0003
+#define MEDIATEK_PRODUCT_FP_2COM 0x0023
+#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
+#define MEDIATEK_PRODUCT_FPDC_2COM 0x0033
/* Cellient products */
#define CELLIENT_VENDOR_ID 0x2692
.reserved = BIT(1),
};
+static const struct option_blacklist_info net_intf2_blacklist = {
+ .reserved = BIT(2),
+};
+
static const struct option_blacklist_info net_intf3_blacklist = {
.reserved = BIT(3),
};
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
#include <linux/io.h>
#include <linux/device.h>
#include <linux/regulator/consumer.h>
+#include <linux/suspend.h>
#include <video/omapdss.h>
#endif /* CONFIG_DEBUG_FS && CONFIG_OMAP2_DSS_DEBUG_SUPPORT */
/* PLATFORM DEVICE */
+static int omap_dss_pm_notif(struct notifier_block *b, unsigned long v, void *d)
+{
+ DSSDBG("pm notif %lu\n", v);
+
+ switch (v) {
+ case PM_SUSPEND_PREPARE:
+ DSSDBG("suspending displays\n");
+ return dss_suspend_all_devices();
+
+ case PM_POST_SUSPEND:
+ DSSDBG("resuming displays\n");
+ return dss_resume_all_devices();
+
+ default:
+ return 0;
+ }
+}
+
+static struct notifier_block omap_dss_pm_notif_block = {
+ .notifier_call = omap_dss_pm_notif,
+};
+
static int __init omap_dss_probe(struct platform_device *pdev)
{
struct omap_dss_board_info *pdata = pdev->dev.platform_data;
else if (pdata->default_device)
core.default_display_name = pdata->default_device->name;
+ register_pm_notifier(&omap_dss_pm_notif_block);
+
return 0;
err_debugfs:
static int omap_dss_remove(struct platform_device *pdev)
{
+ unregister_pm_notifier(&omap_dss_pm_notif_block);
+
dss_uninitialize_debugfs();
dss_uninit_overlays(pdev);
dss_disable_all_devices();
}
-static int omap_dss_suspend(struct platform_device *pdev, pm_message_t state)
-{
- DSSDBG("suspend %d\n", state.event);
-
- return dss_suspend_all_devices();
-}
-
-static int omap_dss_resume(struct platform_device *pdev)
-{
- DSSDBG("resume\n");
-
- return dss_resume_all_devices();
-}
-
static struct platform_driver omap_dss_driver = {
.remove = omap_dss_remove,
.shutdown = omap_dss_shutdown,
- .suspend = omap_dss_suspend,
- .resume = omap_dss_resume,
.driver = {
.name = "omapdss",
.owner = THIS_MODULE,
DSSDBG("dispc_runtime_put\n");
r = pm_runtime_put_sync(&dispc.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static inline bool dispc_mgr_is_lcd(enum omap_channel channel)
DSSDBG("dsi_runtime_put\n");
r = pm_runtime_put_sync(&dsi->pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
/* source clock for DSI PLL. this could also be PCLKFREE */
DSSDBG("dss_runtime_put\n");
r = pm_runtime_put_sync(&dss.pdev->dev);
- WARN_ON(r < 0 && r != -EBUSY);
+ WARN_ON(r < 0 && r != -ENOSYS && r != -EBUSY);
}
/* DEBUGFS */
DSSDBG("hdmi_runtime_put\n");
r = pm_runtime_put_sync(&hdmi.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static int __init hdmi_init_display(struct omap_dss_device *dssdev)
DSSDBG("rfbi_runtime_put\n");
r = pm_runtime_put_sync(&rfbi.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
void rfbi_bus_lock(void)
DSSDBG("venc_runtime_put\n");
r = pm_runtime_put_sync(&venc.pdev->dev);
- WARN_ON(r < 0);
+ WARN_ON(r < 0 && r != -ENOSYS);
}
static const struct venc_config *venc_timings_to_config(
struct task_struct *thread;
/* Waiting for host to ack the pages we released. */
- struct completion acked;
+ wait_queue_head_t acked;
/* Number of balloon pages we've told the Host we're not using. */
unsigned int num_pages;
static void balloon_ack(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (vb)
- complete(&vb->acked);
+ wake_up(&vb->acked);
}
static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
{
struct scatterlist sg;
+ unsigned int len;
sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
- init_completion(&vb->acked);
-
/* We should always be able to add one buffer to an empty queue. */
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
virtqueue_kick(vq);
/* When host has read buffer, this completes via balloon_ack */
- wait_for_completion(&vb->acked);
+ wait_event(vb->acked, virtqueue_get_buf(vq, &len));
}
static void set_page_pfns(u32 pfns[], struct page *page)
*/
static void stats_request(struct virtqueue *vq)
{
- struct virtio_balloon *vb;
- unsigned int len;
+ struct virtio_balloon *vb = vq->vdev->priv;
- vb = virtqueue_get_buf(vq, &len);
- if (!vb)
- return;
vb->need_stats_update = 1;
wake_up(&vb->config_change);
}
{
struct virtqueue *vq;
struct scatterlist sg;
+ unsigned int len;
vb->need_stats_update = 0;
update_balloon_stats(vb);
vq = vb->stats_vq;
+ if (!virtqueue_get_buf(vq, &len))
+ return;
sg_init_one(&sg, vb->stats, sizeof(vb->stats));
if (virtqueue_add_buf(vq, &sg, 1, 0, vb, GFP_KERNEL) < 0)
BUG();
INIT_LIST_HEAD(&vb->pages);
vb->num_pages = 0;
init_waitqueue_head(&vb->config_change);
+ init_waitqueue_head(&vb->acked);
vb->vdev = vdev;
vb->need_stats_update = 0;
return -EBUSY;
/* Activate SA1100 Watchdog timer */
- OSMR3 = OSCR + pre_margin;
- OSSR = OSSR_M3;
- OWER = OWER_WME;
- OIER |= OIER_E3;
+ writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
+ writel_relaxed(OSSR_M3, OSSR);
+ writel_relaxed(OWER_WME, OWER);
+ writel_relaxed(readl_relaxed(OIER) | OIER_E3, OIER);
return nonseekable_open(inode, file);
}
{
if (len)
/* Refresh OSMR3 timer. */
- OSMR3 = OSCR + pre_margin;
+ writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
return len;
}
break;
case WDIOC_KEEPALIVE:
- OSMR3 = OSCR + pre_margin;
+ writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
ret = 0;
break;
}
pre_margin = oscr_freq * time;
- OSMR3 = OSCR + pre_margin;
+ writel_relaxed(readl_relaxed(OSCR) + pre_margin, OSMR3);
/*fall through*/
case WDIOC_GETTIMEOUT:
static struct buffer_head *
__getblk_slow(struct block_device *bdev, sector_t block, int size)
{
+ int ret;
+ struct buffer_head *bh;
+
/* Size must be multiple of hard sectorsize */
if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
(size < 512 || size > PAGE_SIZE))) {
return NULL;
}
- for (;;) {
- struct buffer_head * bh;
- int ret;
+retry:
+ bh = __find_get_block(bdev, block, size);
+ if (bh)
+ return bh;
+ ret = grow_buffers(bdev, block, size);
+ if (ret == 0) {
+ free_more_memory();
+ goto retry;
+ } else if (ret > 0) {
bh = __find_get_block(bdev, block, size);
if (bh)
return bh;
-
- ret = grow_buffers(bdev, block, size);
- if (ret < 0)
- return NULL;
- if (ret == 0)
- free_more_memory();
}
+ return NULL;
}
/*
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
-/* Forward declarations */
+#ifdef CONFIG_HIGHMEM
+/*
+ * On arches that have high memory, kmap address space is limited. By
+ * serializing the kmap operations on those arches, we ensure that we don't
+ * end up with a bunch of threads in writeback with partially mapped page
+ * arrays, stuck waiting for kmap to come back. That situation prevents
+ * progress and can deadlock.
+ */
+static DEFINE_MUTEX(cifs_kmap_mutex);
+
+static inline void
+cifs_kmap_lock(void)
+{
+ mutex_lock(&cifs_kmap_mutex);
+}
+
+static inline void
+cifs_kmap_unlock(void)
+{
+ mutex_unlock(&cifs_kmap_mutex);
+}
+#else /* !CONFIG_HIGHMEM */
+#define cifs_kmap_lock() do { ; } while(0)
+#define cifs_kmap_unlock() do { ; } while(0)
+#endif /* CONFIG_HIGHMEM */
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
}
/* marshal up the page array */
+ cifs_kmap_lock();
len = rdata->marshal_iov(rdata, data_len);
+ cifs_kmap_unlock();
data_len -= len;
/* issue the read if we have any iovecs left to fill */
* and set the iov_len properly for each one. It may also set
* wdata->bytes too.
*/
+ cifs_kmap_lock();
wdata->marshal_iov(iov, wdata);
+ cifs_kmap_unlock();
cFYI(1, "async write at %llu %u bytes", wdata->offset, wdata->bytes);
#define CIFS_DEFAULT_NON_POSIX_RSIZE (60 * 1024)
#define CIFS_DEFAULT_NON_POSIX_WSIZE (65536)
+/*
+ * On hosts with high memory, we can't currently support wsize/rsize that are
+ * larger than we can kmap at once. Cap the rsize/wsize at
+ * LAST_PKMAP * PAGE_SIZE. We'll never be able to fill a read or write request
+ * larger than that anyway.
+ */
+#ifdef CONFIG_HIGHMEM
+#define CIFS_KMAP_SIZE_LIMIT (LAST_PKMAP * PAGE_CACHE_SIZE)
+#else /* CONFIG_HIGHMEM */
+#define CIFS_KMAP_SIZE_LIMIT (1<<24)
+#endif /* CONFIG_HIGHMEM */
+
static unsigned int
cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info)
{
wsize = min_t(unsigned int, wsize,
server->maxBuf - sizeof(WRITE_REQ) + 4);
+ /* limit to the amount that we can kmap at once */
+ wsize = min_t(unsigned int, wsize, CIFS_KMAP_SIZE_LIMIT);
+
/* hard limit of CIFS_MAX_WSIZE */
wsize = min_t(unsigned int, wsize, CIFS_MAX_WSIZE);
if (!(server->capabilities & CAP_LARGE_READ_X))
rsize = min_t(unsigned int, CIFSMaxBufSize, rsize);
+ /* limit to the amount that we can kmap at once */
+ rsize = min_t(unsigned int, rsize, CIFS_KMAP_SIZE_LIMIT);
+
/* hard limit of CIFS_MAX_RSIZE */
rsize = min_t(unsigned int, rsize, CIFS_MAX_RSIZE);
dentry = d_lookup(parent, name);
if (dentry) {
- /* FIXME: check for inode number changes? */
- if (dentry->d_inode != NULL)
+ inode = dentry->d_inode;
+ /* update inode in place if i_ino didn't change */
+ if (inode && CIFS_I(inode)->uniqueid == fattr->cf_uniqueid) {
+ cifs_fattr_to_inode(inode, fattr);
return dentry;
+ }
d_drop(dentry);
dput(dentry);
}
if (mid == NULL)
return -ENOMEM;
- /* put it on the pending_mid_q */
- spin_lock(&GlobalMid_Lock);
- list_add_tail(&mid->qhead, &server->pending_mid_q);
- spin_unlock(&GlobalMid_Lock);
-
rc = cifs_sign_smb2(iov, nvec, server, &mid->sequence_number);
- if (rc)
- delete_mid(mid);
+ if (rc) {
+ DeleteMidQEntry(mid);
+ return rc;
+ }
+
*ret_mid = mid;
- return rc;
+ return 0;
}
/*
mid->callback_data = cbdata;
mid->mid_state = MID_REQUEST_SUBMITTED;
+ /* put it on the pending_mid_q */
+ spin_lock(&GlobalMid_Lock);
+ list_add_tail(&mid->qhead, &server->pending_mid_q);
+ spin_unlock(&GlobalMid_Lock);
+
+
cifs_in_send_inc(server);
rc = smb_sendv(server, iov, nvec);
cifs_in_send_dec(server);
cifs_save_when_sent(mid);
mutex_unlock(&server->srv_mutex);
- if (rc)
- goto out_err;
+ if (rc == 0)
+ return 0;
- return rc;
-out_err:
delete_mid(mid);
add_credits(server, 1);
wake_up(&server->request_q);
goto error_tgt_fput;
/* Check if EPOLLWAKEUP is allowed */
- if ((epds.events & EPOLLWAKEUP) && !capable(CAP_EPOLLWAKEUP))
+ if ((epds.events & EPOLLWAKEUP) && !capable(CAP_BLOCK_SUSPEND))
epds.events &= ~EPOLLWAKEUP;
/*
out:
ios->numdevs = devs_in_group;
ios->pages_consumed = cur_pg;
- if (unlikely(ret)) {
- if (length == ios->length)
- return ret;
- else
- ios->length -= length;
- }
- return 0;
+ return ret;
}
int ore_create(struct ore_io_state *ios)
{
unsigned data_devs = sp2d->data_devs;
unsigned group_width = data_devs + sp2d->parity;
- unsigned p;
+ int p, c;
if (!sp2d->needed)
return;
- for (p = 0; p < sp2d->pages_in_unit; p++) {
- struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
-
- if (_1ps->write_count < group_width) {
- unsigned c;
+ for (c = data_devs - 1; c >= 0; --c)
+ for (p = sp2d->pages_in_unit - 1; p >= 0; --p) {
+ struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
- for (c = 0; c < data_devs; c++)
- if (_1ps->page_is_read[c]) {
- struct page *page = _1ps->pages[c];
+ if (_1ps->page_is_read[c]) {
+ struct page *page = _1ps->pages[c];
- r4w->put_page(priv, page);
- _1ps->page_is_read[c] = false;
- }
+ r4w->put_page(priv, page);
+ _1ps->page_is_read[c] = false;
+ }
}
+ for (p = 0; p < sp2d->pages_in_unit; p++) {
+ struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
+
memset(_1ps->pages, 0, group_width * sizeof(*_1ps->pages));
_1ps->write_count = 0;
_1ps->tx = NULL;
* ios->sp2d[p][*], xor is calculated the same way. These pages are
* allocated/freed and don't go through cache
*/
-static int _read_4_write(struct ore_io_state *ios)
+static int _read_4_write_first_stripe(struct ore_io_state *ios)
{
- struct ore_io_state *ios_read;
struct ore_striping_info read_si;
struct __stripe_pages_2d *sp2d = ios->sp2d;
u64 offset = ios->si.first_stripe_start;
- u64 last_stripe_end;
- unsigned bytes_in_stripe = ios->si.bytes_in_stripe;
- unsigned i, c, p, min_p = sp2d->pages_in_unit, max_p = -1;
- int ret;
+ unsigned c, p, min_p = sp2d->pages_in_unit, max_p = -1;
if (offset == ios->offset) /* Go to start collect $200 */
goto read_last_stripe;
min_p = _sp2d_min_pg(sp2d);
max_p = _sp2d_max_pg(sp2d);
+ ORE_DBGMSG("stripe_start=0x%llx ios->offset=0x%llx min_p=%d max_p=%d\n",
+ offset, ios->offset, min_p, max_p);
+
for (c = 0; ; c++) {
ore_calc_stripe_info(ios->layout, offset, 0, &read_si);
read_si.obj_offset += min_p * PAGE_SIZE;
}
read_last_stripe:
+ return 0;
+}
+
+static int _read_4_write_last_stripe(struct ore_io_state *ios)
+{
+ struct ore_striping_info read_si;
+ struct __stripe_pages_2d *sp2d = ios->sp2d;
+ u64 offset;
+ u64 last_stripe_end;
+ unsigned bytes_in_stripe = ios->si.bytes_in_stripe;
+ unsigned c, p, min_p = sp2d->pages_in_unit, max_p = -1;
+
offset = ios->offset + ios->length;
if (offset % PAGE_SIZE)
_add_to_r4w_last_page(ios, &offset);
c = _dev_order(ios->layout->group_width * ios->layout->mirrors_p1,
ios->layout->mirrors_p1, read_si.par_dev, read_si.dev);
- BUG_ON(ios->si.first_stripe_start + bytes_in_stripe != last_stripe_end);
- /* unaligned IO must be within a single stripe */
-
if (min_p == sp2d->pages_in_unit) {
/* Didn't do it yet */
min_p = _sp2d_min_pg(sp2d);
max_p = _sp2d_max_pg(sp2d);
}
+ ORE_DBGMSG("offset=0x%llx stripe_end=0x%llx min_p=%d max_p=%d\n",
+ offset, last_stripe_end, min_p, max_p);
+
while (offset < last_stripe_end) {
struct __1_page_stripe *_1ps = &sp2d->_1p_stripes[p];
}
read_it:
+ return 0;
+}
+
+static int _read_4_write_execute(struct ore_io_state *ios)
+{
+ struct ore_io_state *ios_read;
+ unsigned i;
+ int ret;
+
ios_read = ios->ios_read_4_write;
if (!ios_read)
return 0;
}
_mark_read4write_pages_uptodate(ios_read, ret);
+ ore_put_io_state(ios_read);
+ ios->ios_read_4_write = NULL; /* Might need a reuse at last stripe */
return 0;
}
/* If first stripe, Read in all read4write pages
* (if needed) before we calculate the first parity.
*/
- _read_4_write(ios);
+ _read_4_write_first_stripe(ios);
}
+ if (!cur_len) /* If last stripe r4w pages of last stripe */
+ _read_4_write_last_stripe(ios);
+ _read_4_write_execute(ios);
for (i = 0; i < num_pages; i++) {
pages[i] = _raid_page_alloc();
int _ore_post_alloc_raid_stuff(struct ore_io_state *ios)
{
- struct ore_layout *layout = ios->layout;
-
if (ios->parity_pages) {
+ struct ore_layout *layout = ios->layout;
unsigned pages_in_unit = layout->stripe_unit / PAGE_SIZE;
- unsigned stripe_size = ios->si.bytes_in_stripe;
- u64 last_stripe, first_stripe;
if (_sp2d_alloc(pages_in_unit, layout->group_width,
layout->parity, &ios->sp2d)) {
return -ENOMEM;
}
-
- /* Round io down to last full strip */
- first_stripe = div_u64(ios->offset, stripe_size);
- last_stripe = div_u64(ios->offset + ios->length, stripe_size);
-
- /* If an IO spans more then a single stripe it must end at
- * a stripe boundary. The reminder at the end is pushed into the
- * next IO.
- */
- if (last_stripe != first_stripe) {
- ios->length = last_stripe * stripe_size - ios->offset;
-
- BUG_ON(!ios->length);
- ios->nr_pages = (ios->length + PAGE_SIZE - 1) /
- PAGE_SIZE;
- ios->si.length = ios->length; /*make it consistent */
- }
}
return 0;
}
err = ext4_move_extents(filp, donor_filp, me.orig_start,
me.donor_start, me.len, &me.moved_len);
mnt_drop_write_file(filp);
- mnt_drop_write(filp->f_path.mnt);
if (copy_to_user((struct move_extent __user *)arg,
&me, sizeof(me)))
fat_encode_fh(struct inode *inode, __u32 *fh, int *lenp, struct inode *parent)
{
int len = *lenp;
- u32 ipos_h, ipos_m, ipos_l;
+ struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
+ loff_t i_pos;
if (len < 5) {
*lenp = 5;
return 255; /* no room */
}
- ipos_h = MSDOS_I(inode)->i_pos >> 8;
- ipos_m = (MSDOS_I(inode)->i_pos & 0xf0) << 24;
- ipos_l = (MSDOS_I(inode)->i_pos & 0x0f) << 28;
+ i_pos = fat_i_pos_read(sbi, inode);
*lenp = 5;
fh[0] = inode->i_ino;
fh[1] = inode->i_generation;
- fh[2] = ipos_h;
- fh[3] = ipos_m | MSDOS_I(inode)->i_logstart;
- fh[4] = ipos_l;
+ fh[2] = i_pos >> 8;
+ fh[3] = ((i_pos & 0xf0) << 24) | MSDOS_I(inode)->i_logstart;
+ fh[4] = (i_pos & 0x0f) << 28;
if (parent)
fh[4] |= MSDOS_I(parent)->i_logstart;
return 3;
#include <linux/sched.h>
#include <linux/pipe_fs_i.h>
-static void wait_for_partner(struct inode* inode, unsigned int *cnt)
+static int wait_for_partner(struct inode* inode, unsigned int *cnt)
{
int cur = *cnt;
if (signal_pending(current))
break;
}
+ return cur == *cnt ? -ERESTARTSYS : 0;
}
static void wake_up_partner(struct inode* inode)
* seen a writer */
filp->f_version = pipe->w_counter;
} else {
- wait_for_partner(inode, &pipe->w_counter);
- if(signal_pending(current))
+ if (wait_for_partner(inode, &pipe->w_counter))
goto err_rd;
}
}
wake_up_partner(inode);
if (!pipe->readers) {
- wait_for_partner(inode, &pipe->r_counter);
- if (signal_pending(current))
+ if (wait_for_partner(inode, &pipe->r_counter))
goto err_wr;
}
break;
case F_WRLCK:
return generic_add_lease(filp, arg, flp);
default:
- BUG();
+ return -EINVAL;
}
}
EXPORT_SYMBOL(generic_setlease);
list_for_each_entry_safe(req, tmp, &reqs, wb_list) {
if (!nfs_pageio_add_request(&desc, req)) {
+ nfs_list_remove_request(req);
nfs_list_add_request(req, &failed);
spin_lock(cinfo.lock);
dreq->flags = 0;
}
nfs_pageio_complete(&desc);
- while (!list_empty(&failed))
+ while (!list_empty(&failed)) {
+ req = nfs_list_entry(failed.next);
+ nfs_list_remove_request(req);
nfs_unlock_and_release_request(req);
+ }
if (put_dreq(dreq))
nfs_direct_write_complete(dreq, dreq->inode);
objios->ios->done = _read_done;
dprintk("%s: offset=0x%llx length=0x%x\n", __func__,
rdata->args.offset, rdata->args.count);
- return ore_read(objios->ios);
+ ret = ore_read(objios->ios);
+ if (unlikely(ret))
+ objio_free_result(&objios->oir);
+ return ret;
}
/*
struct nfs_write_data *wdata = objios->oir.rpcdata;
struct address_space *mapping = wdata->header->inode->i_mapping;
pgoff_t index = offset / PAGE_SIZE;
- struct page *page = find_get_page(mapping, index);
+ struct page *page;
+ loff_t i_size = i_size_read(wdata->header->inode);
+
+ if (offset >= i_size) {
+ *uptodate = true;
+ dprintk("%s: g_zero_page index=0x%lx\n", __func__, index);
+ return ZERO_PAGE(0);
+ }
+ page = find_get_page(mapping, index);
if (!page) {
page = find_or_create_page(mapping, index, GFP_NOFS);
if (unlikely(!page)) {
static void __r4w_put_page(void *priv, struct page *page)
{
- dprintk("%s: index=0x%lx\n", __func__, page->index);
- page_cache_release(page);
+ dprintk("%s: index=0x%lx\n", __func__,
+ (page == ZERO_PAGE(0)) ? -1UL : page->index);
+ if (ZERO_PAGE(0) != page)
+ page_cache_release(page);
return;
}
dprintk("%s: offset=0x%llx length=0x%x\n", __func__,
wdata->args.offset, wdata->args.count);
ret = ore_write(objios->ios);
- if (unlikely(ret))
+ if (unlikely(ret)) {
+ objio_free_result(&objios->oir);
return ret;
+ }
if (objios->sync)
_write_done(objios->ios, objios);
dfprintk(MOUNT, "--> nfs4_try_mount()\n");
+ mount_info->fill_super = nfs4_fill_super;
+
export_path = data->nfs_server.export_path;
data->nfs_server.export_path = "/";
root_mnt = nfs_do_root_mount(&nfs4_remote_fs_type, flags, mount_info,
if (ret < 0)
mlog_errno(ret);
- if (file->f_flags & O_SYNC)
+ if (file && (file->f_flags & O_SYNC))
handle->h_sync = 1;
ocfs2_commit_trans(osb, handle);
/* prevent the page from being discarded on memory pressure */
SetPageDirty(page);
+ SetPageUptodate(page);
unlock_page(page);
put_page(page);
lnum = ubifs_next_log_lnum(c, lnum);
}
- /* Fixup the current log head */
- err = fixup_leb(c, c->lhead_lnum, c->lhead_offs);
+ /*
+ * Fixup the log head which contains the only a CS node at the
+ * beginning.
+ */
+ err = fixup_leb(c, c->lhead_lnum,
+ ALIGN(UBIFS_CS_NODE_SZ, c->min_io_size));
if (err)
goto out;
* If we couldn't get anything, give up.
*/
if (bno_cur_lt == NULL && bno_cur_gt == NULL) {
+ xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
+
if (!forced++) {
trace_xfs_alloc_near_busy(args);
xfs_log_force(args->mp, XFS_LOG_SYNC);
goto restart;
}
-
- xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
trace_xfs_alloc_size_neither(args);
args->agbno = NULLAGBLOCK;
return 0;
current_restore_flags_nested(&pflags, PF_FSTRANS);
}
-
-int /* error */
+/*
+ * Data allocation requests often come in with little stack to work on. Push
+ * them off to a worker thread so there is lots of stack to use. Metadata
+ * requests, OTOH, are generally from low stack usage paths, so avoid the
+ * context switch overhead here.
+ */
+int
xfs_alloc_vextent(
- xfs_alloc_arg_t *args) /* allocation argument structure */
+ struct xfs_alloc_arg *args)
{
DECLARE_COMPLETION_ONSTACK(done);
+ if (!args->userdata)
+ return __xfs_alloc_vextent(args);
+
+
args->done = &done;
INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
queue_work(xfs_alloc_wq, &args->work);
(__uint64_t)XFS_BUF_ADDR(bp), func, bp->b_error, bp->b_length);
}
-int
-xfs_bwrite(
- struct xfs_buf *bp)
-{
- int error;
-
- ASSERT(xfs_buf_islocked(bp));
-
- bp->b_flags |= XBF_WRITE;
- bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q);
-
- xfs_bdstrat_cb(bp);
-
- error = xfs_buf_iowait(bp);
- if (error) {
- xfs_force_shutdown(bp->b_target->bt_mount,
- SHUTDOWN_META_IO_ERROR);
- }
- return error;
-}
-
/*
* Called when we want to stop a buffer from getting written or read.
* We attach the EIO error, muck with its flags, and call xfs_buf_ioend
return EIO;
}
-
-/*
- * All xfs metadata buffers except log state machine buffers
- * get this attached as their b_bdstrat callback function.
- * This is so that we can catch a buffer
- * after prematurely unpinning it to forcibly shutdown the filesystem.
- */
-int
+STATIC int
xfs_bdstrat_cb(
struct xfs_buf *bp)
{
return 0;
}
+int
+xfs_bwrite(
+ struct xfs_buf *bp)
+{
+ int error;
+
+ ASSERT(xfs_buf_islocked(bp));
+
+ bp->b_flags |= XBF_WRITE;
+ bp->b_flags &= ~(XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q);
+
+ xfs_bdstrat_cb(bp);
+
+ error = xfs_buf_iowait(bp);
+ if (error) {
+ xfs_force_shutdown(bp->b_target->bt_mount,
+ SHUTDOWN_META_IO_ERROR);
+ }
+ return error;
+}
+
/*
* Wrapper around bdstrat so that we can stop data from going to disk in case
* we are shutting down the filesystem. Typically user data goes thru this
*/
atomic_set(&bp->b_io_remaining, 1);
_xfs_buf_ioapply(bp);
- _xfs_buf_ioend(bp, 0);
+ _xfs_buf_ioend(bp, 1);
xfs_buf_rele(bp);
}
extern int xfs_bwrite(struct xfs_buf *bp);
extern void xfsbdstrat(struct xfs_mount *, struct xfs_buf *);
-extern int xfs_bdstrat_cb(struct xfs_buf *);
extern void xfs_buf_ioend(xfs_buf_t *, int);
extern void xfs_buf_ioerror(xfs_buf_t *, int);
if (!XFS_BUF_ISSTALE(bp)) {
bp->b_flags |= XBF_WRITE | XBF_ASYNC | XBF_DONE;
- xfs_bdstrat_cb(bp);
+ xfs_buf_iorequest(bp);
} else {
xfs_buf_relse(bp);
}
{
if (dev)
dev->cma_area = cma;
- if (!dev || !dma_contiguous_default_area)
+ if (!dev && !dma_contiguous_default_area)
dma_contiguous_default_area = cma;
}
-/*
- * linux/include/asm-generic/sizes.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_GENERIC_SIZES_H__
-#define __ASM_GENERIC_SIZES_H__
-
-#define SZ_1 0x00000001
-#define SZ_2 0x00000002
-#define SZ_4 0x00000004
-#define SZ_8 0x00000008
-#define SZ_16 0x00000010
-#define SZ_32 0x00000020
-#define SZ_64 0x00000040
-#define SZ_128 0x00000080
-#define SZ_256 0x00000100
-#define SZ_512 0x00000200
-
-#define SZ_1K 0x00000400
-#define SZ_2K 0x00000800
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_32K 0x00008000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif /* __ASM_GENERIC_SIZES_H__ */
+/* This is a placeholder, to be removed over time */
+#include <linux/sizes.h>
unsigned long size,
unsigned long align,
unsigned long goal);
+void *___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+ unsigned long size,
+ unsigned long align,
+ unsigned long goal,
+ unsigned long limit);
extern void *__alloc_bootmem_low(unsigned long size,
unsigned long align,
unsigned long goal);
#define CAP_WAKE_ALARM 35
-/* Allow preventing system suspends while epoll events are pending */
+/* Allow preventing system suspends */
-#define CAP_EPOLLWAKEUP 36
+#define CAP_BLOCK_SUSPEND 36
-#define CAP_LAST_CAP CAP_EPOLLWAKEUP
+#define CAP_LAST_CAP CAP_BLOCK_SUSPEND
#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
/* connection negotiation temps */
char in_banner[CEPH_BANNER_MAX_LEN];
- union {
- struct { /* outgoing connection */
- struct ceph_msg_connect out_connect;
- struct ceph_msg_connect_reply in_reply;
- };
- struct { /* incoming */
- struct ceph_msg_connect in_connect;
- struct ceph_msg_connect_reply out_reply;
- };
- };
+ struct ceph_msg_connect out_connect;
+ struct ceph_msg_connect_reply in_reply;
struct ceph_entity_addr actual_peer_addr;
/* message out temps */
extern struct device *get_device(struct device *dev);
extern void put_device(struct device *dev);
-extern void wait_for_device_probe(void);
-
#ifdef CONFIG_DEVTMPFS
extern int devtmpfs_create_node(struct device *dev);
extern int devtmpfs_delete_node(struct device *dev);
* re-allowed until epoll_wait is called again after consuming the wakeup
* event(s).
*
- * Requires CAP_EPOLLWAKEUP
+ * Requires CAP_BLOCK_SUSPEND
*/
#define EPOLLWAKEUP (1 << 29)
/* Gpio pin is open source */
#define GPIOF_OPEN_SOURCE (1 << 3)
-#define GPIOF_EXPORT (1 << 2)
-#define GPIOF_EXPORT_CHANGEABLE (1 << 3)
+#define GPIOF_EXPORT (1 << 4)
+#define GPIOF_EXPORT_CHANGEABLE (1 << 5)
#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT)
#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE)
* @lock: lock protecting the base and associated clock bases
* and timers
* @active_bases: Bitfield to mark bases with active timers
+ * @clock_was_set: Indicates that clock was set from irq context.
* @expires_next: absolute time of the next event which was scheduled
* via clock_set_next_event()
* @hres_active: State of high resolution mode
*/
struct hrtimer_cpu_base {
raw_spinlock_t lock;
- unsigned long active_bases;
+ unsigned int active_bases;
+ unsigned int clock_was_set;
#ifdef CONFIG_HIGH_RES_TIMERS
ktime_t expires_next;
int hres_active;
# define MONOTONIC_RES_NSEC HIGH_RES_NSEC
# define KTIME_MONOTONIC_RES KTIME_HIGH_RES
+extern void clock_was_set_delayed(void);
+
#else
# define MONOTONIC_RES_NSEC LOW_RES_NSEC
{
return 0;
}
+
+static inline void clock_was_set_delayed(void) { }
+
#endif
extern void clock_was_set(void);
extern ktime_t ktime_get_real(void);
extern ktime_t ktime_get_boottime(void);
extern ktime_t ktime_get_monotonic_offset(void);
+extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot);
DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
SYSTEM_HALT,
SYSTEM_POWER_OFF,
SYSTEM_RESTART,
- SYSTEM_SUSPEND_DISK,
} system_state;
#define TAINT_PROPRIETARY_MODULE 0
#ifdef CONFIG_PRINTK
void kmsg_dump(enum kmsg_dump_reason reason);
+bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len);
+
bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
char *line, size_t size, size_t *len);
bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
char *buf, size_t size, size_t *len);
+void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper);
+
void kmsg_dump_rewind(struct kmsg_dumper *dumper);
int kmsg_dump_register(struct kmsg_dumper *dumper);
{
}
+static inline bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper,
+ bool syslog, const char *line,
+ size_t size, size_t *len)
+{
+ return false;
+}
+
static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
const char *line, size_t size, size_t *len)
{
return false;
}
+static inline void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
+{
+}
+
static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper)
{
}
phys_addr_t size, phys_addr_t align, int nid);
phys_addr_t memblock_find_in_range(phys_addr_t start, phys_addr_t end,
phys_addr_t size, phys_addr_t align);
-int memblock_free_reserved_regions(void);
-int memblock_reserve_reserved_regions(void);
-
+phys_addr_t get_allocated_memblock_reserved_regions_info(phys_addr_t *addr);
void memblock_allow_resize(void);
int memblock_add_node(phys_addr_t base, phys_addr_t size, int nid);
int memblock_add(phys_addr_t base, phys_addr_t size);
range, including holes */
int node_id;
wait_queue_head_t kswapd_wait;
- struct task_struct *kswapd;
+ struct task_struct *kswapd; /* Protected by lock_memory_hotplug() */
int kswapd_max_order;
enum zone_type classzone_idx;
} pg_data_t;
PCI_DEV_FLAGS_NO_D3 = (__force pci_dev_flags_t) 2,
/* Provide indication device is assigned by a Virtual Machine Manager */
PCI_DEV_FLAGS_ASSIGNED = (__force pci_dev_flags_t) 4,
- /* Device causes system crash if in D3 during S3 sleep */
- PCI_DEV_FLAGS_NO_D3_DURING_SLEEP = (__force pci_dev_flags_t) 8,
};
enum pci_irq_reroute_variant {
/* Internal to kernel */
extern void rcu_sched_qs(int cpu);
extern void rcu_bh_qs(int cpu);
-extern void rcu_preempt_note_context_switch(void);
extern void rcu_check_callbacks(int cpu, int user);
struct notifier_block;
extern void rcu_idle_enter(void);
#ifdef CONFIG_TINY_RCU
+static inline void rcu_preempt_note_context_switch(void)
+{
+}
+
static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
{
*delta_jiffies = ULONG_MAX;
#else /* #ifdef CONFIG_TINY_RCU */
+void rcu_preempt_note_context_switch(void);
int rcu_preempt_needs_cpu(void);
static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
static inline void rcu_note_context_switch(int cpu)
{
rcu_sched_qs(cpu);
+ rcu_preempt_note_context_switch();
}
/*
#include <linux/types.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
+#include <linux/kref.h>
+#include <linux/mutex.h>
/* The feature bitmap for virtio rpmsg */
#define VIRTIO_RPMSG_F_NS 0 /* RP supports name service notifications */
/**
* struct rpmsg_endpoint - binds a local rpmsg address to its user
* @rpdev: rpmsg channel device
+ * @refcount: when this drops to zero, the ept is deallocated
* @cb: rx callback handler
+ * @cb_lock: must be taken before accessing/changing @cb
* @addr: local rpmsg address
* @priv: private data for the driver's use
*
*/
struct rpmsg_endpoint {
struct rpmsg_channel *rpdev;
+ struct kref refcount;
rpmsg_rx_cb_t cb;
+ struct mutex cb_lock;
u32 addr;
void *priv;
};
INIT_LIST_HEAD(&p->rcu_node_entry);
}
-static inline void rcu_switch_from(struct task_struct *prev)
-{
- if (prev->rcu_read_lock_nesting != 0)
- rcu_preempt_note_context_switch();
-}
-
#else
static inline void rcu_copy_process(struct task_struct *p)
{
}
-static inline void rcu_switch_from(struct task_struct *prev)
-{
-}
-
#endif
#ifdef CONFIG_SMP
}
#endif
+#ifdef CONFIG_NO_HZ
+void calc_load_enter_idle(void);
+void calc_load_exit_idle(void);
+#else
+static inline void calc_load_enter_idle(void) { }
+static inline void calc_load_exit_idle(void) { }
+#endif /* CONFIG_NO_HZ */
+
#ifndef CONFIG_CPUMASK_OFFSTACK
static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
{
--- /dev/null
+/*
+ * include/linux/sizes.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __LINUX_SIZES_H__
+#define __LINUX_SIZES_H__
+
+#define SZ_1 0x00000001
+#define SZ_2 0x00000002
+#define SZ_4 0x00000004
+#define SZ_8 0x00000008
+#define SZ_16 0x00000010
+#define SZ_32 0x00000020
+#define SZ_64 0x00000040
+#define SZ_128 0x00000080
+#define SZ_256 0x00000100
+#define SZ_512 0x00000200
+
+#define SZ_1K 0x00000400
+#define SZ_2K 0x00000800
+#define SZ_4K 0x00001000
+#define SZ_8K 0x00002000
+#define SZ_16K 0x00004000
+#define SZ_32K 0x00008000
+#define SZ_64K 0x00010000
+#define SZ_128K 0x00020000
+#define SZ_256K 0x00040000
+#define SZ_512K 0x00080000
+
+#define SZ_1M 0x00100000
+#define SZ_2M 0x00200000
+#define SZ_4M 0x00400000
+#define SZ_8M 0x00800000
+#define SZ_16M 0x01000000
+#define SZ_32M 0x02000000
+#define SZ_64M 0x04000000
+#define SZ_128M 0x08000000
+#define SZ_256M 0x10000000
+#define SZ_512M 0x20000000
+
+#define SZ_1G 0x40000000
+#define SZ_2G 0x80000000
+
+#endif /* __LINUX_SIZES_H__ */
struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
if (!ct || !nf_ct_is_untracked(ct)) {
- nf_reset(skb);
+ nf_conntrack_put(skb->nfct);
skb->nfct = &nf_ct_untracked_get()->ct_general;
skb->nfctinfo = IP_CT_NEW;
nf_conntrack_get(skb->nfct);
struct net *net = nf_ct_net(ct);
struct nf_conntrack_ecache *e;
- if (net->ct.nf_conntrack_event_cb == NULL)
+ if (!rcu_access_pointer(net->ct.nf_conntrack_event_cb))
return;
e = nf_ct_ecache_find(ct);
ATAPI_COMMAND_SET = 1,
};
+#define ATA_RESP_FIS_SIZE 24
+
struct sata_device {
enum ata_command_set command_set;
struct smp_resp rps_resp; /* report_phy_sata_resp */
struct ata_port *ap;
struct ata_host ata_host;
- struct ata_taskfile tf;
+ u8 fis[ATA_RESP_FIS_SIZE];
};
enum {
*/
struct ata_task_resp {
u16 frame_len;
- u8 ending_fis[24]; /* dev to host or data-in */
+ u8 ending_fis[ATA_RESP_FIS_SIZE]; /* dev to host or data-in */
};
#define SAS_STATUS_BUF_SIZE 96
static inline struct scsi_driver *scsi_cmd_to_driver(struct scsi_cmnd *cmd)
{
+ struct scsi_driver **sdp;
+
if (!cmd->request->rq_disk)
return NULL;
- return *(struct scsi_driver **)cmd->request->rq_disk->private_data;
+ sdp = (struct scsi_driver **)cmd->request->rq_disk->private_data;
+ if (!sdp)
+ return NULL;
+
+ return *sdp;
}
extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
mutex_unlock(&cgroup_mutex);
/*
- * We want to drop the active superblock reference from the
- * cgroup creation after all the dentry refs are gone -
- * kill_sb gets mighty unhappy otherwise. Mark
- * dentry->d_fsdata with cgroup_diput() to tell
- * cgroup_d_release() to call deactivate_super().
+ * Drop the active superblock reference that we took when we
+ * created the cgroup
*/
- dentry->d_fsdata = cgroup_diput;
+ deactivate_super(cgrp->root->sb);
/*
* if we're getting rid of the cgroup, refcount should ensure
return 1;
}
-static void cgroup_d_release(struct dentry *dentry)
-{
- /* did cgroup_diput() tell me to deactivate super? */
- if (dentry->d_fsdata == cgroup_diput)
- deactivate_super(dentry->d_sb);
-}
-
static void remove_dir(struct dentry *d)
{
struct dentry *parent = dget(d->d_parent);
static const struct dentry_operations cgroup_dops = {
.d_iput = cgroup_diput,
.d_delete = cgroup_delete,
- .d_release = cgroup_d_release,
};
struct inode *inode =
{
struct cgroup_subsys_state *css =
container_of(work, struct cgroup_subsys_state, dput_work);
+ struct dentry *dentry = css->cgroup->dentry;
+ struct super_block *sb = dentry->d_sb;
- dput(css->cgroup->dentry);
+ atomic_inc(&sb->s_active);
+ dput(dentry);
+ deactivate_super(sb);
}
static void init_cgroup_css(struct cgroup_subsys_state *css,
#include <linux/ctype.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/kmsg_dump.h>
#include <linux/reboot.h>
#include <linux/sched.h>
#include <linux/sysrq.h>
*/
static int kdb_dmesg(int argc, const char **argv)
{
- char *syslog_data[4], *start, *end, c = '\0', *p;
- int diag, logging, logsize, lines = 0, adjust = 0, n;
+ int diag;
+ int logging;
+ int lines = 0;
+ int adjust = 0;
+ int n = 0;
+ int skip = 0;
+ struct kmsg_dumper dumper = { .active = 1 };
+ size_t len;
+ char buf[201];
if (argc > 2)
return KDB_ARGCOUNT;
kdb_set(2, setargs);
}
- /* syslog_data[0,1] physical start, end+1. syslog_data[2,3]
- * logical start, end+1. */
- kdb_syslog_data(syslog_data);
- if (syslog_data[2] == syslog_data[3])
- return 0;
- logsize = syslog_data[1] - syslog_data[0];
- start = syslog_data[2];
- end = syslog_data[3];
-#define KDB_WRAP(p) (((p - syslog_data[0]) % logsize) + syslog_data[0])
- for (n = 0, p = start; p < end; ++p) {
- c = *KDB_WRAP(p);
- if (c == '\n')
- ++n;
- }
- if (c != '\n')
- ++n;
+ kmsg_dump_rewind_nolock(&dumper);
+ while (kmsg_dump_get_line_nolock(&dumper, 1, NULL, 0, NULL))
+ n++;
+
if (lines < 0) {
if (adjust >= n)
kdb_printf("buffer only contains %d lines, nothing "
else if (adjust - lines >= n)
kdb_printf("buffer only contains %d lines, last %d "
"lines printed\n", n, n - adjust);
- if (adjust) {
- for (; start < end && adjust; ++start) {
- if (*KDB_WRAP(start) == '\n')
- --adjust;
- }
- if (start < end)
- ++start;
- }
- for (p = start; p < end && lines; ++p) {
- if (*KDB_WRAP(p) == '\n')
- ++lines;
- }
- end = p;
+ skip = adjust;
+ lines = abs(lines);
} else if (lines > 0) {
- int skip = n - (adjust + lines);
+ skip = n - lines - adjust;
+ lines = abs(lines);
if (adjust >= n) {
kdb_printf("buffer only contains %d lines, "
"nothing printed\n", n);
kdb_printf("buffer only contains %d lines, first "
"%d lines printed\n", n, lines);
}
- for (; start < end && skip; ++start) {
- if (*KDB_WRAP(start) == '\n')
- --skip;
- }
- for (p = start; p < end && lines; ++p) {
- if (*KDB_WRAP(p) == '\n')
- --lines;
- }
- end = p;
+ } else {
+ lines = n;
}
- /* Do a line at a time (max 200 chars) to reduce protocol overhead */
- c = '\n';
- while (start != end) {
- char buf[201];
- p = buf;
- if (KDB_FLAG(CMD_INTERRUPT))
- return 0;
- while (start < end && (c = *KDB_WRAP(start)) &&
- (p - buf) < sizeof(buf)-1) {
- ++start;
- *p++ = c;
- if (c == '\n')
- break;
+
+ if (skip >= n || skip < 0)
+ return 0;
+
+ kmsg_dump_rewind_nolock(&dumper);
+ while (kmsg_dump_get_line_nolock(&dumper, 1, buf, sizeof(buf), &len)) {
+ if (skip) {
+ skip--;
+ continue;
}
- *p = '\0';
- kdb_printf("%s", buf);
+ if (!lines--)
+ break;
+
+ kdb_printf("%.*s\n", (int)len - 1, buf);
}
- if (c != '\n')
- kdb_printf("\n");
return 0;
}
extern int kdb_grep_leading;
extern int kdb_grep_trailing;
extern char *kdb_cmds[];
-extern void kdb_syslog_data(char *syslog_data[]);
extern unsigned long kdb_task_state_string(const char *);
extern char kdb_task_state_char (const struct task_struct *);
extern unsigned long kdb_task_state(const struct task_struct *p,
}
err = arch_dup_task_struct(tsk, orig);
- if (err)
- goto out;
+ /*
+ * We defer looking at err, because we will need this setup
+ * for the clean up path to work correctly.
+ */
tsk->stack = ti;
-
setup_thread_stack(tsk, orig);
+
+ if (err)
+ goto out;
+
clear_user_return_notifier(tsk);
clear_tsk_need_resched(tsk);
stackend = end_of_stack(tsk);
return 0;
}
+static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
+{
+ ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
+ ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
+
+ return ktime_get_update_offsets(offs_real, offs_boot);
+}
+
/*
* Retrigger next event is called after clock was set
*
static void retrigger_next_event(void *arg)
{
struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
- struct timespec realtime_offset, xtim, wtm, sleep;
if (!hrtimer_hres_active())
return;
- /* Optimized out for !HIGH_RES */
- get_xtime_and_monotonic_and_sleep_offset(&xtim, &wtm, &sleep);
- set_normalized_timespec(&realtime_offset, -wtm.tv_sec, -wtm.tv_nsec);
-
- /* Adjust CLOCK_REALTIME offset */
raw_spin_lock(&base->lock);
- base->clock_base[HRTIMER_BASE_REALTIME].offset =
- timespec_to_ktime(realtime_offset);
- base->clock_base[HRTIMER_BASE_BOOTTIME].offset =
- timespec_to_ktime(sleep);
-
+ hrtimer_update_base(base);
hrtimer_force_reprogram(base, 0);
raw_spin_unlock(&base->lock);
}
base->clock_base[i].resolution = KTIME_HIGH_RES;
tick_setup_sched_timer();
-
/* "Retrigger" the interrupt to get things going */
retrigger_next_event(NULL);
local_irq_restore(flags);
return 1;
}
+/*
+ * Called from timekeeping code to reprogramm the hrtimer interrupt
+ * device. If called from the timer interrupt context we defer it to
+ * softirq context.
+ */
+void clock_was_set_delayed(void)
+{
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+
+ cpu_base->clock_was_set = 1;
+ __raise_softirq_irqoff(HRTIMER_SOFTIRQ);
+}
+
#else
static inline int hrtimer_hres_active(void) { return 0; }
cpu_base->nr_events++;
dev->next_event.tv64 = KTIME_MAX;
- entry_time = now = ktime_get();
+ raw_spin_lock(&cpu_base->lock);
+ entry_time = now = hrtimer_update_base(cpu_base);
retry:
expires_next.tv64 = KTIME_MAX;
-
- raw_spin_lock(&cpu_base->lock);
/*
* We set expires_next to KTIME_MAX here with cpu_base->lock
* held to prevent that a timer is enqueued in our queue via
* We need to prevent that we loop forever in the hrtimer
* interrupt routine. We give it 3 attempts to avoid
* overreacting on some spurious event.
+ *
+ * Acquire base lock for updating the offsets and retrieving
+ * the current time.
*/
- now = ktime_get();
+ raw_spin_lock(&cpu_base->lock);
+ now = hrtimer_update_base(cpu_base);
cpu_base->nr_retries++;
if (++retries < 3)
goto retry;
*/
cpu_base->nr_hangs++;
cpu_base->hang_detected = 1;
+ raw_spin_unlock(&cpu_base->lock);
delta = ktime_sub(now, entry_time);
if (delta.tv64 > cpu_base->max_hang_time.tv64)
cpu_base->max_hang_time = delta;
static void run_hrtimer_softirq(struct softirq_action *h)
{
+ struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+
+ if (cpu_base->clock_was_set) {
+ cpu_base->clock_was_set = 0;
+ clock_was_set();
+ }
+
hrtimer_peek_ahead_timers();
}
#include <linux/syscore_ops.h>
#include <linux/ctype.h>
#include <linux/genhd.h>
-#include <scsi/scsi_scan.h>
#include "power.h"
async_synchronize_full();
}
- /*
- * We can't depend on SCSI devices being available after loading
- * one of their modules until scsi_complete_async_scans() is
- * called and the resume device usually is a SCSI one.
- */
- scsi_complete_async_scans();
-
swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
error = -ENODEV;
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/freezer.h>
-#include <scsi/scsi_scan.h>
#include <asm/uaccess.h>
* appear.
*/
wait_for_device_probe();
- scsi_complete_async_scans();
data->swap = -1;
data->mode = O_WRONLY;
*/
enum log_flags {
- LOG_DEFAULT = 0,
- LOG_NOCONS = 1, /* already flushed, do not print to console */
+ LOG_NOCONS = 1, /* already flushed, do not print to console */
+ LOG_NEWLINE = 2, /* text ended with a newline */
+ LOG_PREFIX = 4, /* text started with a prefix */
+ LOG_CONT = 8, /* text is a fragment of a continuation line */
};
struct log {
/* the next printk record to read by syslog(READ) or /proc/kmsg */
static u64 syslog_seq;
static u32 syslog_idx;
+static enum log_flags syslog_prev;
+static size_t syslog_partial;
/* index and sequence number of the first record stored in the buffer */
static u64 log_first_seq;
ret = mutex_lock_interruptible(&user->lock);
if (ret)
return ret;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
while (user->seq == log_next_seq) {
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
goto out;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
ret = wait_event_interruptible(log_wait,
user->seq != log_next_seq);
if (ret)
goto out;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
}
if (user->seq < log_first_seq) {
user->idx = log_first_idx;
user->seq = log_first_seq;
ret = -EPIPE;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
goto out;
}
for (i = 0; i < msg->text_len; i++) {
unsigned char c = log_text(msg)[i];
- if (c < ' ' || c >= 128)
+ if (c < ' ' || c >= 127 || c == '\\')
len += sprintf(user->buf + len, "\\x%02x", c);
else
user->buf[len++] = c;
continue;
}
- if (c < ' ' || c >= 128) {
+ if (c < ' ' || c >= 127 || c == '\\') {
len += sprintf(user->buf + len, "\\x%02x", c);
continue;
}
user->idx = log_next(user->idx);
user->seq++;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
if (len > count) {
ret = -EINVAL;
if (offset)
return -ESPIPE;
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
switch (whence) {
case SEEK_SET:
/* the first record */
default:
ret = -EINVAL;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
return ret;
}
poll_wait(file, &log_wait, wait);
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
if (user->seq < log_next_seq) {
/* return error when data has vanished underneath us */
if (user->seq < log_first_seq)
ret = POLLIN|POLLRDNORM|POLLERR|POLLPRI;
ret = POLLIN|POLLRDNORM;
}
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
return ret;
}
mutex_init(&user->lock);
- raw_spin_lock(&logbuf_lock);
+ raw_spin_lock_irq(&logbuf_lock);
user->idx = log_first_idx;
user->seq = log_first_seq;
- raw_spin_unlock(&logbuf_lock);
+ raw_spin_unlock_irq(&logbuf_lock);
file->private_data = user;
return 0;
static size_t print_prefix(const struct log *msg, bool syslog, char *buf)
{
size_t len = 0;
+ unsigned int prefix = (msg->facility << 3) | msg->level;
if (syslog) {
if (buf) {
- len += sprintf(buf, "<%u>", msg->level);
+ len += sprintf(buf, "<%u>", prefix);
} else {
len += 3;
- if (msg->level > 9)
- len++;
- if (msg->level > 99)
+ if (prefix > 999)
+ len += 3;
+ else if (prefix > 99)
+ len += 2;
+ else if (prefix > 9)
len++;
}
}
return len;
}
-static size_t msg_print_text(const struct log *msg, bool syslog,
- char *buf, size_t size)
+static size_t msg_print_text(const struct log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size)
{
const char *text = log_text(msg);
size_t text_size = msg->text_len;
+ bool prefix = true;
+ bool newline = true;
size_t len = 0;
+ if ((prev & LOG_CONT) && !(msg->flags & LOG_PREFIX))
+ prefix = false;
+
+ if (msg->flags & LOG_CONT) {
+ if ((prev & LOG_CONT) && !(prev & LOG_NEWLINE))
+ prefix = false;
+
+ if (!(msg->flags & LOG_NEWLINE))
+ newline = false;
+ }
+
do {
const char *next = memchr(text, '\n', text_size);
size_t text_len;
text_len + 1>= size - len)
break;
- len += print_prefix(msg, syslog, buf + len);
+ if (prefix)
+ len += print_prefix(msg, syslog, buf + len);
memcpy(buf + len, text, text_len);
len += text_len;
- buf[len++] = '\n';
+ if (next || newline)
+ buf[len++] = '\n';
} else {
/* SYSLOG_ACTION_* buffer size only calculation */
- len += print_prefix(msg, syslog, NULL);
- len += text_len + 1;
+ if (prefix)
+ len += print_prefix(msg, syslog, NULL);
+ len += text_len;
+ if (next || newline)
+ len++;
}
+ prefix = true;
text = next;
} while (text);
while (size > 0) {
size_t n;
+ size_t skip;
raw_spin_lock_irq(&logbuf_lock);
if (syslog_seq < log_first_seq) {
/* messages are gone, move to first one */
syslog_seq = log_first_seq;
syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
}
if (syslog_seq == log_next_seq) {
raw_spin_unlock_irq(&logbuf_lock);
break;
}
+
+ skip = syslog_partial;
msg = log_from_idx(syslog_idx);
- n = msg_print_text(msg, true, text, LOG_LINE_MAX);
- if (n <= size) {
+ n = msg_print_text(msg, syslog_prev, true, text, LOG_LINE_MAX);
+ if (n - syslog_partial <= size) {
+ /* message fits into buffer, move forward */
syslog_idx = log_next(syslog_idx);
syslog_seq++;
+ syslog_prev = msg->flags;
+ n -= syslog_partial;
+ syslog_partial = 0;
+ } else if (!len){
+ /* partial read(), remember position */
+ n = size;
+ syslog_partial += n;
} else
n = 0;
raw_spin_unlock_irq(&logbuf_lock);
if (!n)
break;
- len += n;
- size -= n;
- buf += n;
- n = copy_to_user(buf - n, text, n);
-
- if (n) {
- len -= n;
+ if (copy_to_user(buf, text + skip, n)) {
if (!len)
len = -EFAULT;
break;
}
+
+ len += n;
+ size -= n;
+ buf += n;
}
kfree(text);
u64 next_seq;
u64 seq;
u32 idx;
+ enum log_flags prev;
if (clear_seq < log_first_seq) {
/* messages are gone, move to first available one */
*/
seq = clear_seq;
idx = clear_idx;
+ prev = 0;
while (seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- len += msg_print_text(msg, true, NULL, 0);
+ len += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
}
/* move first record forward until length fits into the buffer */
seq = clear_seq;
idx = clear_idx;
+ prev = 0;
while (len > size && seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- len -= msg_print_text(msg, true, NULL, 0);
+ len -= msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
}
next_seq = log_next_seq;
len = 0;
+ prev = 0;
while (len >= 0 && seq < next_seq) {
struct log *msg = log_from_idx(idx);
int textlen;
- textlen = msg_print_text(msg, true, text, LOG_LINE_MAX);
+ textlen = msg_print_text(msg, prev, true, text, LOG_LINE_MAX);
if (textlen < 0) {
len = textlen;
break;
}
idx = log_next(idx);
seq++;
+ prev = msg->flags;
raw_spin_unlock_irq(&logbuf_lock);
if (copy_to_user(buf + len, text, textlen))
/* messages are gone, move to next one */
seq = log_first_seq;
idx = log_first_idx;
+ prev = 0;
}
}
}
{
bool clear = false;
static int saved_console_loglevel = -1;
- static DEFINE_MUTEX(syslog_mutex);
int error;
error = check_syslog_permissions(type, from_file);
error = -EFAULT;
goto out;
}
- error = mutex_lock_interruptible(&syslog_mutex);
- if (error)
- goto out;
error = wait_event_interruptible(log_wait,
syslog_seq != log_next_seq);
- if (error) {
- mutex_unlock(&syslog_mutex);
+ if (error)
goto out;
- }
error = syslog_print(buf, len);
- mutex_unlock(&syslog_mutex);
break;
/* Read/clear last kernel messages */
case SYSLOG_ACTION_READ_CLEAR:
/* messages are gone, move to first one */
syslog_seq = log_first_seq;
syslog_idx = log_first_idx;
+ syslog_prev = 0;
+ syslog_partial = 0;
}
if (from_file) {
/*
*/
error = log_next_idx - syslog_idx;
} else {
- u64 seq;
- u32 idx;
+ u64 seq = syslog_seq;
+ u32 idx = syslog_idx;
+ enum log_flags prev = syslog_prev;
error = 0;
- seq = syslog_seq;
- idx = syslog_idx;
while (seq < log_next_seq) {
struct log *msg = log_from_idx(idx);
- error += msg_print_text(msg, true, NULL, 0);
+ error += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
+ error -= syslog_partial;
}
raw_spin_unlock_irq(&logbuf_lock);
break;
return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
}
-#ifdef CONFIG_KGDB_KDB
-/* kdb dmesg command needs access to the syslog buffer. do_syslog()
- * uses locks so it cannot be used during debugging. Just tell kdb
- * where the start and end of the physical and logical logs are. This
- * is equivalent to do_syslog(3).
- */
-void kdb_syslog_data(char *syslog_data[4])
-{
- syslog_data[0] = log_buf;
- syslog_data[1] = log_buf + log_buf_len;
- syslog_data[2] = log_buf + log_first_idx;
- syslog_data[3] = log_buf + log_next_idx;
-}
-#endif /* CONFIG_KGDB_KDB */
-
static bool __read_mostly ignore_loglevel;
static int __init ignore_loglevel_setup(char *str)
static char textbuf[LOG_LINE_MAX];
char *text = textbuf;
size_t text_len;
+ enum log_flags lflags = 0;
unsigned long flags;
int this_cpu;
- bool newline = false;
- bool prefix = false;
int printed_len = 0;
boot_delay_msec();
recursion_bug = 0;
printed_len += strlen(recursion_msg);
/* emit KERN_CRIT message */
- log_store(0, 2, LOG_DEFAULT, 0,
+ log_store(0, 2, LOG_PREFIX|LOG_NEWLINE, 0,
NULL, 0, recursion_msg, printed_len);
}
/* mark and strip a trailing newline */
if (text_len && text[text_len-1] == '\n') {
text_len--;
- newline = true;
+ lflags |= LOG_NEWLINE;
}
/* strip syslog prefix and extract log level or control flags */
if (level == -1)
level = text[1] - '0';
case 'd': /* KERN_DEFAULT */
- prefix = true;
+ lflags |= LOG_PREFIX;
case 'c': /* KERN_CONT */
text += 3;
text_len -= 3;
if (level == -1)
level = default_message_loglevel;
- if (dict) {
- prefix = true;
- newline = true;
- }
+ if (dict)
+ lflags |= LOG_PREFIX|LOG_NEWLINE;
- if (!newline) {
+ if (!(lflags & LOG_NEWLINE)) {
/*
* Flush the conflicting buffer. An earlier newline was missing,
* or another task also prints continuation lines.
*/
- if (cont.len && (prefix || cont.owner != current))
+ if (cont.len && (lflags & LOG_PREFIX || cont.owner != current))
cont_flush();
/* buffer line if possible, otherwise store it right away */
if (!cont_add(facility, level, text, text_len))
- log_store(facility, level, LOG_DEFAULT, 0,
+ log_store(facility, level, lflags | LOG_CONT, 0,
dict, dictlen, text, text_len);
} else {
bool stored = false;
* flush it out and store this line separately.
*/
if (cont.len && cont.owner == current) {
- if (!prefix)
+ if (!(lflags & LOG_PREFIX))
stored = cont_add(facility, level, text, text_len);
cont_flush();
}
if (!stored)
- log_store(facility, level, LOG_DEFAULT, 0,
+ log_store(facility, level, lflags, 0,
dict, dictlen, text, text_len);
}
printed_len += text_len;
static struct log *log_from_idx(u32 idx) { return NULL; }
static u32 log_next(u32 idx) { return 0; }
static void call_console_drivers(int level, const char *text, size_t len) {}
-static size_t msg_print_text(const struct log *msg, bool syslog,
- char *buf, size_t size) { return 0; }
+static size_t msg_print_text(const struct log *msg, enum log_flags prev,
+ bool syslog, char *buf, size_t size) { return 0; }
static size_t cont_print_text(char *text, size_t size) { return 0; }
#endif /* CONFIG_PRINTK */
/* the next printk record to write to the console */
static u64 console_seq;
static u32 console_idx;
+static enum log_flags console_prev;
/**
* console_unlock - unlock the console system
/* messages are gone, move to first one */
console_seq = log_first_seq;
console_idx = log_first_idx;
+ console_prev = 0;
}
skip:
if (console_seq == log_next_seq)
*/
console_idx = log_next(console_idx);
console_seq++;
+ /*
+ * We will get here again when we register a new
+ * CON_PRINTBUFFER console. Clear the flag so we
+ * will properly dump everything later.
+ */
+ msg->flags &= ~LOG_NOCONS;
goto skip;
}
level = msg->level;
- len = msg_print_text(msg, false, text, sizeof(text));
-
+ len = msg_print_text(msg, console_prev, false,
+ text, sizeof(text));
console_idx = log_next(console_idx);
console_seq++;
+ console_prev = msg->flags;
raw_spin_unlock(&logbuf_lock);
stop_critical_timings(); /* don't trace print latency */
raw_spin_lock_irqsave(&logbuf_lock, flags);
console_seq = syslog_seq;
console_idx = syslog_idx;
+ console_prev = syslog_prev;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
/*
* We're about to replay the log buffer. Only do this to the
}
/**
- * kmsg_dump_get_line - retrieve one kmsg log line
+ * kmsg_dump_get_line_nolock - retrieve one kmsg log line (unlocked version)
* @dumper: registered kmsg dumper
* @syslog: include the "<4>" prefixes
* @line: buffer to copy the line to
*
* A return value of FALSE indicates that there are no more records to
* read.
+ *
+ * The function is similar to kmsg_dump_get_line(), but grabs no locks.
*/
-bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
- char *line, size_t size, size_t *len)
+bool kmsg_dump_get_line_nolock(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
{
- unsigned long flags;
struct log *msg;
size_t l = 0;
bool ret = false;
if (!dumper->active)
goto out;
- raw_spin_lock_irqsave(&logbuf_lock, flags);
if (dumper->cur_seq < log_first_seq) {
/* messages are gone, move to first available one */
dumper->cur_seq = log_first_seq;
}
/* last entry */
- if (dumper->cur_seq >= log_next_seq) {
- raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ if (dumper->cur_seq >= log_next_seq)
goto out;
- }
msg = log_from_idx(dumper->cur_idx);
- l = msg_print_text(msg, syslog,
- line, size);
+ l = msg_print_text(msg, 0, syslog, line, size);
dumper->cur_idx = log_next(dumper->cur_idx);
dumper->cur_seq++;
ret = true;
- raw_spin_unlock_irqrestore(&logbuf_lock, flags);
out:
if (len)
*len = l;
return ret;
}
+
+/**
+ * kmsg_dump_get_line - retrieve one kmsg log line
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ unsigned long flags;
+ bool ret;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ ret = kmsg_dump_get_line_nolock(dumper, syslog, line, size, len);
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ return ret;
+}
EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
/**
u32 idx;
u64 next_seq;
u32 next_idx;
+ enum log_flags prev;
size_t l = 0;
bool ret = false;
/* calculate length of entire buffer */
seq = dumper->cur_seq;
idx = dumper->cur_idx;
+ prev = 0;
while (seq < dumper->next_seq) {
struct log *msg = log_from_idx(idx);
- l += msg_print_text(msg, true, NULL, 0);
+ l += msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
/* move first record forward until length fits into the buffer */
seq = dumper->cur_seq;
idx = dumper->cur_idx;
+ prev = 0;
while (l > size && seq < dumper->next_seq) {
struct log *msg = log_from_idx(idx);
- l -= msg_print_text(msg, true, NULL, 0);
+ l -= msg_print_text(msg, prev, true, NULL, 0);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
/* last message in next interation */
next_idx = idx;
l = 0;
+ prev = 0;
while (seq < dumper->next_seq) {
struct log *msg = log_from_idx(idx);
- l += msg_print_text(msg, syslog,
- buf + l, size - l);
-
+ l += msg_print_text(msg, prev, syslog, buf + l, size - l);
idx = log_next(idx);
seq++;
+ prev = msg->flags;
}
dumper->next_seq = next_seq;
EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
/**
+ * kmsg_dump_rewind_nolock - reset the interator (unlocked version)
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ *
+ * The function is similar to kmsg_dump_rewind(), but grabs no locks.
+ */
+void kmsg_dump_rewind_nolock(struct kmsg_dumper *dumper)
+{
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+}
+
+/**
* kmsg_dump_rewind - reset the interator
* @dumper: registered kmsg dumper
*
unsigned long flags;
raw_spin_lock_irqsave(&logbuf_lock, flags);
- dumper->cur_seq = clear_seq;
- dumper->cur_idx = clear_idx;
- dumper->next_seq = log_next_seq;
- dumper->next_idx = log_next_idx;
+ kmsg_dump_rewind_nolock(dumper);
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
}
EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
{
trace_rcu_utilization("Start context switch");
rcu_sched_qs(cpu);
+ rcu_preempt_note_context_switch(cpu);
trace_rcu_utilization("End context switch");
}
EXPORT_SYMBOL_GPL(rcu_note_context_switch);
/* Forward declarations for rcutree_plugin.h */
static void rcu_bootup_announce(void);
long rcu_batches_completed(void);
+static void rcu_preempt_note_context_switch(int cpu);
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
*
* Caller must disable preemption.
*/
-void rcu_preempt_note_context_switch(void)
+static void rcu_preempt_note_context_switch(int cpu)
{
struct task_struct *t = current;
unsigned long flags;
(t->rcu_read_unlock_special & RCU_READ_UNLOCK_BLOCKED) == 0) {
/* Possibly blocking in an RCU read-side critical section. */
- rdp = __this_cpu_ptr(rcu_preempt_state.rda);
+ rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
rnp = rdp->mynode;
raw_spin_lock_irqsave(&rnp->lock, flags);
t->rcu_read_unlock_special |= RCU_READ_UNLOCK_BLOCKED;
* means that we continue to block the current grace period.
*/
local_irq_save(flags);
- rcu_preempt_qs(smp_processor_id());
+ rcu_preempt_qs(cpu);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_force_quiescent_state);
/*
+ * Because preemptible RCU does not exist, we never have to check for
+ * CPUs being in quiescent states.
+ */
+static void rcu_preempt_note_context_switch(int cpu)
+{
+}
+
+/*
* Because preemptible RCU does not exist, there are never any preempted
* RCU readers.
*/
#endif
/* Here we just switch the register state and the stack. */
- rcu_switch_from(prev);
switch_to(prev, next, prev);
barrier();
}
+/*
+ * Global load-average calculations
+ *
+ * We take a distributed and async approach to calculating the global load-avg
+ * in order to minimize overhead.
+ *
+ * The global load average is an exponentially decaying average of nr_running +
+ * nr_uninterruptible.
+ *
+ * Once every LOAD_FREQ:
+ *
+ * nr_active = 0;
+ * for_each_possible_cpu(cpu)
+ * nr_active += cpu_of(cpu)->nr_running + cpu_of(cpu)->nr_uninterruptible;
+ *
+ * avenrun[n] = avenrun[0] * exp_n + nr_active * (1 - exp_n)
+ *
+ * Due to a number of reasons the above turns in the mess below:
+ *
+ * - for_each_possible_cpu() is prohibitively expensive on machines with
+ * serious number of cpus, therefore we need to take a distributed approach
+ * to calculating nr_active.
+ *
+ * \Sum_i x_i(t) = \Sum_i x_i(t) - x_i(t_0) | x_i(t_0) := 0
+ * = \Sum_i { \Sum_j=1 x_i(t_j) - x_i(t_j-1) }
+ *
+ * So assuming nr_active := 0 when we start out -- true per definition, we
+ * can simply take per-cpu deltas and fold those into a global accumulate
+ * to obtain the same result. See calc_load_fold_active().
+ *
+ * Furthermore, in order to avoid synchronizing all per-cpu delta folding
+ * across the machine, we assume 10 ticks is sufficient time for every
+ * cpu to have completed this task.
+ *
+ * This places an upper-bound on the IRQ-off latency of the machine. Then
+ * again, being late doesn't loose the delta, just wrecks the sample.
+ *
+ * - cpu_rq()->nr_uninterruptible isn't accurately tracked per-cpu because
+ * this would add another cross-cpu cacheline miss and atomic operation
+ * to the wakeup path. Instead we increment on whatever cpu the task ran
+ * when it went into uninterruptible state and decrement on whatever cpu
+ * did the wakeup. This means that only the sum of nr_uninterruptible over
+ * all cpus yields the correct result.
+ *
+ * This covers the NO_HZ=n code, for extra head-aches, see the comment below.
+ */
+
/* Variables and functions for calc_load */
static atomic_long_t calc_load_tasks;
static unsigned long calc_load_update;
unsigned long avenrun[3];
-EXPORT_SYMBOL(avenrun);
+EXPORT_SYMBOL(avenrun); /* should be removed */
+
+/**
+ * get_avenrun - get the load average array
+ * @loads: pointer to dest load array
+ * @offset: offset to add
+ * @shift: shift count to shift the result left
+ *
+ * These values are estimates at best, so no need for locking.
+ */
+void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
+{
+ loads[0] = (avenrun[0] + offset) << shift;
+ loads[1] = (avenrun[1] + offset) << shift;
+ loads[2] = (avenrun[2] + offset) << shift;
+}
static long calc_load_fold_active(struct rq *this_rq)
{
return delta;
}
+/*
+ * a1 = a0 * e + a * (1 - e)
+ */
static unsigned long
calc_load(unsigned long load, unsigned long exp, unsigned long active)
{
#ifdef CONFIG_NO_HZ
/*
- * For NO_HZ we delay the active fold to the next LOAD_FREQ update.
+ * Handle NO_HZ for the global load-average.
+ *
+ * Since the above described distributed algorithm to compute the global
+ * load-average relies on per-cpu sampling from the tick, it is affected by
+ * NO_HZ.
+ *
+ * The basic idea is to fold the nr_active delta into a global idle-delta upon
+ * entering NO_HZ state such that we can include this as an 'extra' cpu delta
+ * when we read the global state.
+ *
+ * Obviously reality has to ruin such a delightfully simple scheme:
+ *
+ * - When we go NO_HZ idle during the window, we can negate our sample
+ * contribution, causing under-accounting.
+ *
+ * We avoid this by keeping two idle-delta counters and flipping them
+ * when the window starts, thus separating old and new NO_HZ load.
+ *
+ * The only trick is the slight shift in index flip for read vs write.
+ *
+ * 0s 5s 10s 15s
+ * +10 +10 +10 +10
+ * |-|-----------|-|-----------|-|-----------|-|
+ * r:0 0 1 1 0 0 1 1 0
+ * w:0 1 1 0 0 1 1 0 0
+ *
+ * This ensures we'll fold the old idle contribution in this window while
+ * accumlating the new one.
+ *
+ * - When we wake up from NO_HZ idle during the window, we push up our
+ * contribution, since we effectively move our sample point to a known
+ * busy state.
+ *
+ * This is solved by pushing the window forward, and thus skipping the
+ * sample, for this cpu (effectively using the idle-delta for this cpu which
+ * was in effect at the time the window opened). This also solves the issue
+ * of having to deal with a cpu having been in NOHZ idle for multiple
+ * LOAD_FREQ intervals.
*
* When making the ILB scale, we should try to pull this in as well.
*/
-static atomic_long_t calc_load_tasks_idle;
+static atomic_long_t calc_load_idle[2];
+static int calc_load_idx;
-void calc_load_account_idle(struct rq *this_rq)
+static inline int calc_load_write_idx(void)
{
+ int idx = calc_load_idx;
+
+ /*
+ * See calc_global_nohz(), if we observe the new index, we also
+ * need to observe the new update time.
+ */
+ smp_rmb();
+
+ /*
+ * If the folding window started, make sure we start writing in the
+ * next idle-delta.
+ */
+ if (!time_before(jiffies, calc_load_update))
+ idx++;
+
+ return idx & 1;
+}
+
+static inline int calc_load_read_idx(void)
+{
+ return calc_load_idx & 1;
+}
+
+void calc_load_enter_idle(void)
+{
+ struct rq *this_rq = this_rq();
long delta;
+ /*
+ * We're going into NOHZ mode, if there's any pending delta, fold it
+ * into the pending idle delta.
+ */
delta = calc_load_fold_active(this_rq);
- if (delta)
- atomic_long_add(delta, &calc_load_tasks_idle);
+ if (delta) {
+ int idx = calc_load_write_idx();
+ atomic_long_add(delta, &calc_load_idle[idx]);
+ }
}
-static long calc_load_fold_idle(void)
+void calc_load_exit_idle(void)
{
- long delta = 0;
+ struct rq *this_rq = this_rq();
+
+ /*
+ * If we're still before the sample window, we're done.
+ */
+ if (time_before(jiffies, this_rq->calc_load_update))
+ return;
/*
- * Its got a race, we don't care...
+ * We woke inside or after the sample window, this means we're already
+ * accounted through the nohz accounting, so skip the entire deal and
+ * sync up for the next window.
*/
- if (atomic_long_read(&calc_load_tasks_idle))
- delta = atomic_long_xchg(&calc_load_tasks_idle, 0);
+ this_rq->calc_load_update = calc_load_update;
+ if (time_before(jiffies, this_rq->calc_load_update + 10))
+ this_rq->calc_load_update += LOAD_FREQ;
+}
+
+static long calc_load_fold_idle(void)
+{
+ int idx = calc_load_read_idx();
+ long delta = 0;
+
+ if (atomic_long_read(&calc_load_idle[idx]))
+ delta = atomic_long_xchg(&calc_load_idle[idx], 0);
return delta;
}
{
long delta, active, n;
- /*
- * If we crossed a calc_load_update boundary, make sure to fold
- * any pending idle changes, the respective CPUs might have
- * missed the tick driven calc_load_account_active() update
- * due to NO_HZ.
- */
- delta = calc_load_fold_idle();
- if (delta)
- atomic_long_add(delta, &calc_load_tasks);
-
- /*
- * It could be the one fold was all it took, we done!
- */
- if (time_before(jiffies, calc_load_update + 10))
- return;
-
- /*
- * Catch-up, fold however many we are behind still
- */
- delta = jiffies - calc_load_update - 10;
- n = 1 + (delta / LOAD_FREQ);
+ if (!time_before(jiffies, calc_load_update + 10)) {
+ /*
+ * Catch-up, fold however many we are behind still
+ */
+ delta = jiffies - calc_load_update - 10;
+ n = 1 + (delta / LOAD_FREQ);
- active = atomic_long_read(&calc_load_tasks);
- active = active > 0 ? active * FIXED_1 : 0;
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
- avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
- avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
- avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+ avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+ avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+ avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
- calc_load_update += n * LOAD_FREQ;
-}
-#else
-void calc_load_account_idle(struct rq *this_rq)
-{
-}
+ calc_load_update += n * LOAD_FREQ;
+ }
-static inline long calc_load_fold_idle(void)
-{
- return 0;
+ /*
+ * Flip the idle index...
+ *
+ * Make sure we first write the new time then flip the index, so that
+ * calc_load_write_idx() will see the new time when it reads the new
+ * index, this avoids a double flip messing things up.
+ */
+ smp_wmb();
+ calc_load_idx++;
}
+#else /* !CONFIG_NO_HZ */
-static void calc_global_nohz(void)
-{
-}
-#endif
+static inline long calc_load_fold_idle(void) { return 0; }
+static inline void calc_global_nohz(void) { }
-/**
- * get_avenrun - get the load average array
- * @loads: pointer to dest load array
- * @offset: offset to add
- * @shift: shift count to shift the result left
- *
- * These values are estimates at best, so no need for locking.
- */
-void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
-{
- loads[0] = (avenrun[0] + offset) << shift;
- loads[1] = (avenrun[1] + offset) << shift;
- loads[2] = (avenrun[2] + offset) << shift;
-}
+#endif /* CONFIG_NO_HZ */
/*
* calc_load - update the avenrun load estimates 10 ticks after the
*/
void calc_global_load(unsigned long ticks)
{
- long active;
+ long active, delta;
if (time_before(jiffies, calc_load_update + 10))
return;
+ /*
+ * Fold the 'old' idle-delta to include all NO_HZ cpus.
+ */
+ delta = calc_load_fold_idle();
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
+
active = atomic_long_read(&calc_load_tasks);
active = active > 0 ? active * FIXED_1 : 0;
calc_load_update += LOAD_FREQ;
/*
- * Account one period with whatever state we found before
- * folding in the nohz state and ageing the entire idle period.
- *
- * This avoids loosing a sample when we go idle between
- * calc_load_account_active() (10 ticks ago) and now and thus
- * under-accounting.
+ * In case we idled for multiple LOAD_FREQ intervals, catch up in bulk.
*/
calc_global_nohz();
}
return;
delta = calc_load_fold_active(this_rq);
- delta += calc_load_fold_idle();
if (delta)
atomic_long_add(delta, &calc_load_tasks);
}
/*
+ * End of global load-average stuff
+ */
+
+/*
* The exact cpuload at various idx values, calculated at every tick would be
* load = (2^idx - 1) / 2^idx * load + 1 / 2^idx * cur_load
*
static struct task_struct *pick_next_task_idle(struct rq *rq)
{
schedstat_inc(rq, sched_goidle);
- calc_load_account_idle(rq);
return rq->idle;
}
return (u64)sysctl_sched_time_avg * NSEC_PER_MSEC / 2;
}
-void calc_load_account_idle(struct rq *this_rq);
-
#ifdef CONFIG_SCHED_HRTICK
/*
#ifdef CONFIG_CHECKPOINT_RESTORE
static int prctl_set_mm_exe_file(struct mm_struct *mm, unsigned int fd)
{
- struct vm_area_struct *vma;
struct file *exe_file;
struct dentry *dentry;
int err;
down_write(&mm->mmap_sem);
/*
- * Forbid mm->exe_file change if there are mapped other files.
+ * Forbid mm->exe_file change if old file still mapped.
*/
err = -EBUSY;
- for (vma = mm->mmap; vma; vma = vma->vm_next) {
- if (vma->vm_file && !path_equal(&vma->vm_file->f_path,
- &exe_file->f_path))
- goto exit_unlock;
+ if (mm->exe_file) {
+ struct vm_area_struct *vma;
+
+ for (vma = mm->mmap; vma; vma = vma->vm_next)
+ if (vma->vm_file &&
+ path_equal(&vma->vm_file->f_path,
+ &mm->exe_file->f_path))
+ goto exit_unlock;
}
/*
if (test_and_set_bit(MMF_EXE_FILE_CHANGED, &mm->flags))
goto exit_unlock;
+ err = 0;
set_mm_exe_file(mm, exe_file);
exit_unlock:
up_write(&mm->mmap_sem);
time_state = TIME_DEL;
break;
case TIME_INS:
- if (secs % 86400 == 0) {
+ if (!(time_status & STA_INS))
+ time_state = TIME_OK;
+ else if (secs % 86400 == 0) {
leap = -1;
time_state = TIME_OOP;
time_tai++;
}
break;
case TIME_DEL:
- if ((secs + 1) % 86400 == 0) {
+ if (!(time_status & STA_DEL))
+ time_state = TIME_OK;
+ else if ((secs + 1) % 86400 == 0) {
leap = 1;
time_tai--;
time_state = TIME_WAIT;
*/
if (!ts->tick_stopped) {
select_nohz_load_balancer(1);
+ calc_load_enter_idle();
ts->idle_tick = hrtimer_get_expires(&ts->sched_timer);
ts->tick_stopped = 1;
account_idle_ticks(ticks);
#endif
+ calc_load_exit_idle();
touch_softlockup_watchdog();
/*
* Cancel the scheduled timer and restore the tick
/* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
struct timespec raw_time;
+ /* Offset clock monotonic -> clock realtime */
+ ktime_t offs_real;
+
+ /* Offset clock monotonic -> clock boottime */
+ ktime_t offs_boot;
+
/* Seqlock for all timekeeper values */
seqlock_t lock;
};
return clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
}
+static void update_rt_offset(void)
+{
+ struct timespec tmp, *wtm = &timekeeper.wall_to_monotonic;
+
+ set_normalized_timespec(&tmp, -wtm->tv_sec, -wtm->tv_nsec);
+ timekeeper.offs_real = timespec_to_ktime(tmp);
+}
+
/* must hold write on timekeeper.lock */
static void timekeeping_update(bool clearntp)
{
timekeeper.ntp_error = 0;
ntp_clear();
}
+ update_rt_offset();
update_vsyscall(&timekeeper.xtime, &timekeeper.wall_to_monotonic,
timekeeper.clock, timekeeper.mult);
}
}
set_normalized_timespec(&timekeeper.wall_to_monotonic,
-boot.tv_sec, -boot.tv_nsec);
+ update_rt_offset();
timekeeper.total_sleep_time.tv_sec = 0;
timekeeper.total_sleep_time.tv_nsec = 0;
write_sequnlock_irqrestore(&timekeeper.lock, flags);
/* time in seconds when suspend began */
static struct timespec timekeeping_suspend_time;
+static void update_sleep_time(struct timespec t)
+{
+ timekeeper.total_sleep_time = t;
+ timekeeper.offs_boot = timespec_to_ktime(t);
+}
+
/**
* __timekeeping_inject_sleeptime - Internal function to add sleep interval
* @delta: pointer to a timespec delta value
timekeeper.xtime = timespec_add(timekeeper.xtime, *delta);
timekeeper.wall_to_monotonic =
timespec_sub(timekeeper.wall_to_monotonic, *delta);
- timekeeper.total_sleep_time = timespec_add(
- timekeeper.total_sleep_time, *delta);
+ update_sleep_time(timespec_add(timekeeper.total_sleep_time, *delta));
}
timekeeper.clock->cycle_last = timekeeper.clock->read(timekeeper.clock);
timekeeper.ntp_error = 0;
timekeeping_suspended = 0;
+ timekeeping_update(false);
write_sequnlock_irqrestore(&timekeeper.lock, flags);
touch_softlockup_watchdog();
leap = second_overflow(timekeeper.xtime.tv_sec);
timekeeper.xtime.tv_sec += leap;
timekeeper.wall_to_monotonic.tv_sec -= leap;
+ if (leap)
+ clock_was_set_delayed();
}
/* Accumulate raw time */
leap = second_overflow(timekeeper.xtime.tv_sec);
timekeeper.xtime.tv_sec += leap;
timekeeper.wall_to_monotonic.tv_sec -= leap;
+ if (leap)
+ clock_was_set_delayed();
}
timekeeping_update(false);
} while (read_seqretry(&timekeeper.lock, seq));
}
+#ifdef CONFIG_HIGH_RES_TIMERS
+/**
+ * ktime_get_update_offsets - hrtimer helper
+ * @offs_real: pointer to storage for monotonic -> realtime offset
+ * @offs_boot: pointer to storage for monotonic -> boottime offset
+ *
+ * Returns current monotonic time and updates the offsets
+ * Called from hrtimer_interupt() or retrigger_next_event()
+ */
+ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot)
+{
+ ktime_t now;
+ unsigned int seq;
+ u64 secs, nsecs;
+
+ do {
+ seq = read_seqbegin(&timekeeper.lock);
+
+ secs = timekeeper.xtime.tv_sec;
+ nsecs = timekeeper.xtime.tv_nsec;
+ nsecs += timekeeping_get_ns();
+ /* If arch requires, add in gettimeoffset() */
+ nsecs += arch_gettimeoffset();
+
+ *offs_real = timekeeper.offs_real;
+ *offs_boot = timekeeper.offs_boot;
+ } while (read_seqretry(&timekeeper.lock, seq));
+
+ now = ktime_add_ns(ktime_set(secs, 0), nsecs);
+ now = ktime_sub(now, *offs_real);
+ return now;
+}
+#endif
+
/**
* ktime_get_monotonic_offset() - get wall_to_monotonic in ktime_t format
*/
rb_init_page(bpage->page);
INIT_LIST_HEAD(&cpu_buffer->reader_page->list);
+ INIT_LIST_HEAD(&cpu_buffer->new_pages);
ret = rb_allocate_pages(cpu_buffer, nr_pages);
if (ret < 0)
* If something was added to this page, it was full
* since it is not the tail page. So we deduct the
* bytes consumed in ring buffer from here.
- * No need to update overruns, since this page is
- * deleted from ring buffer and its entries are
- * already accounted for.
+ * Increment overrun to account for the lost events.
*/
+ local_add(page_entries, &cpu_buffer->overrun);
local_sub(BUF_PAGE_SIZE, &cpu_buffer->entries_bytes);
}
static DEFINE_SPINLOCK(free_entries_lock);
/* Global disable flag - will be set in case of an error */
-static bool global_disable __read_mostly;
+static u32 global_disable __read_mostly;
/* Global error count */
static u32 error_count;
global_disable_dent = debugfs_create_bool("disabled", 0444,
dma_debug_dent,
- (u32 *)&global_disable);
+ &global_disable);
if (!global_disable_dent)
goto out_err;
return ___alloc_bootmem(size, align, goal, limit);
}
-static void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
unsigned long size, unsigned long align,
unsigned long goal, unsigned long limit)
{
if (ptr)
return ptr;
+ /* do not panic in alloc_bootmem_bdata() */
+ if (limit && goal + size > limit)
+ limit = 0;
+
ptr = alloc_bootmem_bdata(pgdat->bdata, size, align, goal, limit);
if (ptr)
return ptr;
if (err) {
putback_lru_pages(&cc->migratepages);
cc->nr_migratepages = 0;
+ if (err == -ENOMEM) {
+ ret = COMPACT_PARTIAL;
+ goto out;
+ }
}
-
}
out:
MAX_NUMNODES);
}
-/*
- * Free memblock.reserved.regions
- */
-int __init_memblock memblock_free_reserved_regions(void)
-{
- if (memblock.reserved.regions == memblock_reserved_init_regions)
- return 0;
-
- return memblock_free(__pa(memblock.reserved.regions),
- sizeof(struct memblock_region) * memblock.reserved.max);
-}
-
-/*
- * Reserve memblock.reserved.regions
- */
-int __init_memblock memblock_reserve_reserved_regions(void)
-{
- if (memblock.reserved.regions == memblock_reserved_init_regions)
- return 0;
-
- return memblock_reserve(__pa(memblock.reserved.regions),
- sizeof(struct memblock_region) * memblock.reserved.max);
-}
-
static void __init_memblock memblock_remove_region(struct memblock_type *type, unsigned long r)
{
type->total_size -= type->regions[r].size;
}
}
+phys_addr_t __init_memblock get_allocated_memblock_reserved_regions_info(
+ phys_addr_t *addr)
+{
+ if (memblock.reserved.regions == memblock_reserved_init_regions)
+ return 0;
+
+ *addr = __pa(memblock.reserved.regions);
+
+ return PAGE_ALIGN(sizeof(struct memblock_region) *
+ memblock.reserved.max);
+}
+
/**
* memblock_double_array - double the size of the memblock regions array
* @type: memblock type of the regions array being doubled
phys_addr_t new_area_size)
{
struct memblock_region *new_array, *old_array;
+ phys_addr_t old_alloc_size, new_alloc_size;
phys_addr_t old_size, new_size, addr;
int use_slab = slab_is_available();
int *in_slab;
/* Calculate new doubled size */
old_size = type->max * sizeof(struct memblock_region);
new_size = old_size << 1;
+ /*
+ * We need to allocated new one align to PAGE_SIZE,
+ * so we can free them completely later.
+ */
+ old_alloc_size = PAGE_ALIGN(old_size);
+ new_alloc_size = PAGE_ALIGN(new_size);
/* Retrieve the slab flag */
if (type == &memblock.memory)
addr = memblock_find_in_range(new_area_start + new_area_size,
memblock.current_limit,
- new_size, sizeof(phys_addr_t));
+ new_alloc_size, PAGE_SIZE);
if (!addr && new_area_size)
addr = memblock_find_in_range(0,
min(new_area_start, memblock.current_limit),
- new_size, sizeof(phys_addr_t));
+ new_alloc_size, PAGE_SIZE);
new_array = addr ? __va(addr) : 0;
}
kfree(old_array);
else if (old_array != memblock_memory_init_regions &&
old_array != memblock_reserved_init_regions)
- memblock_free(__pa(old_array), old_size);
+ memblock_free(__pa(old_array), old_alloc_size);
/* Reserve the new array if that comes from the memblock.
* Otherwise, we needn't do it
*/
if (!use_slab)
- BUG_ON(memblock_reserve(addr, new_size));
+ BUG_ON(memblock_reserve(addr, new_alloc_size));
/* Update slab flag */
*in_slab = use_slab;
pgdat = hotadd_new_pgdat(nid, start);
ret = -ENOMEM;
if (!pgdat)
- goto out;
+ goto error;
new_pgdat = 1;
}
__free_pages_bootmem(pfn_to_page(i), 0);
}
+static unsigned long __init __free_memory_core(phys_addr_t start,
+ phys_addr_t end)
+{
+ unsigned long start_pfn = PFN_UP(start);
+ unsigned long end_pfn = min_t(unsigned long,
+ PFN_DOWN(end), max_low_pfn);
+
+ if (start_pfn > end_pfn)
+ return 0;
+
+ __free_pages_memory(start_pfn, end_pfn);
+
+ return end_pfn - start_pfn;
+}
+
unsigned long __init free_low_memory_core_early(int nodeid)
{
unsigned long count = 0;
- phys_addr_t start, end;
+ phys_addr_t start, end, size;
u64 i;
- /* free reserved array temporarily so that it's treated as free area */
- memblock_free_reserved_regions();
-
- for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL) {
- unsigned long start_pfn = PFN_UP(start);
- unsigned long end_pfn = min_t(unsigned long,
- PFN_DOWN(end), max_low_pfn);
- if (start_pfn < end_pfn) {
- __free_pages_memory(start_pfn, end_pfn);
- count += end_pfn - start_pfn;
- }
- }
+ for_each_free_mem_range(i, MAX_NUMNODES, &start, &end, NULL)
+ count += __free_memory_core(start, end);
+
+ /* free range that is used for reserved array if we allocate it */
+ size = get_allocated_memblock_reserved_regions_info(&start);
+ if (size)
+ count += __free_memory_core(start, start + size);
- /* put region array back? */
- memblock_reserve_reserved_regions();
return count;
}
return ___alloc_bootmem(size, align, goal, limit);
}
-static void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
+void * __init ___alloc_bootmem_node_nopanic(pg_data_t *pgdat,
unsigned long size,
unsigned long align,
unsigned long goal,
__alloc_contig_migrate_alloc(struct page *page, unsigned long private,
int **resultp)
{
- return alloc_page(GFP_HIGHUSER_MOVABLE);
+ gfp_t gfp_mask = GFP_USER | __GFP_MOVABLE;
+
+ if (PageHighMem(page))
+ gfp_mask |= __GFP_HIGHMEM;
+
+ return alloc_page(gfp_mask);
}
/* [start, end) must belong to a single zone. */
}
/*
+ * Sometimes, before we decide whether to proceed or to fail, we must check
+ * that an entry was not already brought back from swap by a racing thread.
+ *
+ * Checking page is not enough: by the time a SwapCache page is locked, it
+ * might be reused, and again be SwapCache, using the same swap as before.
+ */
+static bool shmem_confirm_swap(struct address_space *mapping,
+ pgoff_t index, swp_entry_t swap)
+{
+ void *item;
+
+ rcu_read_lock();
+ item = radix_tree_lookup(&mapping->page_tree, index);
+ rcu_read_unlock();
+ return item == swp_to_radix_entry(swap);
+}
+
+/*
* Like add_to_page_cache_locked, but error if expected item has gone.
*/
static int shmem_add_to_page_cache(struct page *page,
struct address_space *mapping,
pgoff_t index, gfp_t gfp, void *expected)
{
- int error = 0;
+ int error;
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(!PageSwapBacked(page));
+ page_cache_get(page);
+ page->mapping = mapping;
+ page->index = index;
+
+ spin_lock_irq(&mapping->tree_lock);
if (!expected)
- error = radix_tree_preload(gfp & GFP_RECLAIM_MASK);
+ error = radix_tree_insert(&mapping->page_tree, index, page);
+ else
+ error = shmem_radix_tree_replace(mapping, index, expected,
+ page);
if (!error) {
- page_cache_get(page);
- page->mapping = mapping;
- page->index = index;
-
- spin_lock_irq(&mapping->tree_lock);
- if (!expected)
- error = radix_tree_insert(&mapping->page_tree,
- index, page);
- else
- error = shmem_radix_tree_replace(mapping, index,
- expected, page);
- if (!error) {
- mapping->nrpages++;
- __inc_zone_page_state(page, NR_FILE_PAGES);
- __inc_zone_page_state(page, NR_SHMEM);
- spin_unlock_irq(&mapping->tree_lock);
- } else {
- page->mapping = NULL;
- spin_unlock_irq(&mapping->tree_lock);
- page_cache_release(page);
- }
- if (!expected)
- radix_tree_preload_end();
+ mapping->nrpages++;
+ __inc_zone_page_state(page, NR_FILE_PAGES);
+ __inc_zone_page_state(page, NR_SHMEM);
+ spin_unlock_irq(&mapping->tree_lock);
+ } else {
+ page->mapping = NULL;
+ spin_unlock_irq(&mapping->tree_lock);
+ page_cache_release(page);
}
- if (error)
- mem_cgroup_uncharge_cache_page(page);
return error;
}
/* We have to do this with page locked to prevent races */
lock_page(page);
if (!PageSwapCache(page) || page_private(page) != swap.val ||
- page->mapping) {
+ !shmem_confirm_swap(mapping, index, swap)) {
error = -EEXIST; /* try again */
- goto failed;
+ goto unlock;
}
if (!PageUptodate(page)) {
error = -EIO;
error = mem_cgroup_cache_charge(page, current->mm,
gfp & GFP_RECLAIM_MASK);
- if (!error)
+ if (!error) {
error = shmem_add_to_page_cache(page, mapping, index,
gfp, swp_to_radix_entry(swap));
+ /* We already confirmed swap, and make no allocation */
+ VM_BUG_ON(error);
+ }
if (error)
goto failed;
__set_page_locked(page);
error = mem_cgroup_cache_charge(page, current->mm,
gfp & GFP_RECLAIM_MASK);
- if (!error)
- error = shmem_add_to_page_cache(page, mapping, index,
- gfp, NULL);
if (error)
goto decused;
+ error = radix_tree_preload(gfp & GFP_RECLAIM_MASK);
+ if (!error) {
+ error = shmem_add_to_page_cache(page, mapping, index,
+ gfp, NULL);
+ radix_tree_preload_end();
+ }
+ if (error) {
+ mem_cgroup_uncharge_cache_page(page);
+ goto decused;
+ }
lru_cache_add_anon(page);
spin_lock(&info->lock);
unacct:
shmem_unacct_blocks(info->flags, 1);
failed:
- if (swap.val && error != -EINVAL) {
- struct page *test = find_get_page(mapping, index);
- if (test && !radix_tree_exceptional_entry(test))
- page_cache_release(test);
- /* Have another try if the entry has changed */
- if (test != swp_to_radix_entry(swap))
- error = -EEXIST;
- }
+ if (swap.val && error != -EINVAL &&
+ !shmem_confirm_swap(mapping, index, swap))
+ error = -EEXIST;
+unlock:
if (page) {
unlock_page(page);
page_cache_release(page);
spin_unlock(&info->lock);
goto repeat;
}
- if (error == -EEXIST)
+ if (error == -EEXIST) /* from above or from radix_tree_insert */
goto repeat;
return error;
}
return error;
}
-/*
- * llseek SEEK_DATA or SEEK_HOLE through the radix_tree.
- */
-static pgoff_t shmem_seek_hole_data(struct address_space *mapping,
- pgoff_t index, pgoff_t end, int origin)
-{
- struct page *page;
- struct pagevec pvec;
- pgoff_t indices[PAGEVEC_SIZE];
- bool done = false;
- int i;
-
- pagevec_init(&pvec, 0);
- pvec.nr = 1; /* start small: we may be there already */
- while (!done) {
- pvec.nr = shmem_find_get_pages_and_swap(mapping, index,
- pvec.nr, pvec.pages, indices);
- if (!pvec.nr) {
- if (origin == SEEK_DATA)
- index = end;
- break;
- }
- for (i = 0; i < pvec.nr; i++, index++) {
- if (index < indices[i]) {
- if (origin == SEEK_HOLE) {
- done = true;
- break;
- }
- index = indices[i];
- }
- page = pvec.pages[i];
- if (page && !radix_tree_exceptional_entry(page)) {
- if (!PageUptodate(page))
- page = NULL;
- }
- if (index >= end ||
- (page && origin == SEEK_DATA) ||
- (!page && origin == SEEK_HOLE)) {
- done = true;
- break;
- }
- }
- shmem_deswap_pagevec(&pvec);
- pagevec_release(&pvec);
- pvec.nr = PAGEVEC_SIZE;
- cond_resched();
- }
- return index;
-}
-
-static loff_t shmem_file_llseek(struct file *file, loff_t offset, int origin)
-{
- struct address_space *mapping;
- struct inode *inode;
- pgoff_t start, end;
- loff_t new_offset;
-
- if (origin != SEEK_DATA && origin != SEEK_HOLE)
- return generic_file_llseek_size(file, offset, origin,
- MAX_LFS_FILESIZE);
- mapping = file->f_mapping;
- inode = mapping->host;
- mutex_lock(&inode->i_mutex);
- /* We're holding i_mutex so we can access i_size directly */
-
- if (offset < 0)
- offset = -EINVAL;
- else if (offset >= inode->i_size)
- offset = -ENXIO;
- else {
- start = offset >> PAGE_CACHE_SHIFT;
- end = (inode->i_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- new_offset = shmem_seek_hole_data(mapping, start, end, origin);
- new_offset <<= PAGE_CACHE_SHIFT;
- if (new_offset > offset) {
- if (new_offset < inode->i_size)
- offset = new_offset;
- else if (origin == SEEK_DATA)
- offset = -ENXIO;
- else
- offset = inode->i_size;
- }
- }
-
- if (offset >= 0 && offset != file->f_pos) {
- file->f_pos = offset;
- file->f_version = 0;
- }
- mutex_unlock(&inode->i_mutex);
- return offset;
-}
-
static long shmem_fallocate(struct file *file, int mode, loff_t offset,
loff_t len)
{
static const struct file_operations shmem_file_operations = {
.mmap = shmem_mmap,
#ifdef CONFIG_TMPFS
- .llseek = shmem_file_llseek,
+ .llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = shmem_file_aio_read,
sparse_early_usemaps_alloc_pgdat_section(struct pglist_data *pgdat,
unsigned long size)
{
- pg_data_t *host_pgdat;
- unsigned long goal;
+ unsigned long goal, limit;
+ unsigned long *p;
+ int nid;
/*
* A page may contain usemaps for other sections preventing the
* page being freed and making a section unremovable while
* from the same section as the pgdat where possible to avoid
* this problem.
*/
- goal = __pa(pgdat) & PAGE_SECTION_MASK;
- host_pgdat = NODE_DATA(early_pfn_to_nid(goal >> PAGE_SHIFT));
- return __alloc_bootmem_node_nopanic(host_pgdat, size,
- SMP_CACHE_BYTES, goal);
+ goal = __pa(pgdat) & (PAGE_SECTION_MASK << PAGE_SHIFT);
+ limit = goal + (1UL << PA_SECTION_SHIFT);
+ nid = early_pfn_to_nid(goal >> PAGE_SHIFT);
+again:
+ p = ___alloc_bootmem_node_nopanic(NODE_DATA(nid), size,
+ SMP_CACHE_BYTES, goal, limit);
+ if (!p && limit) {
+ limit = 0;
+ goto again;
+ }
+ return p;
}
static void __init check_usemap_section_nr(int nid, unsigned long *usemap)
* them before going back to sleep.
*/
set_pgdat_percpu_threshold(pgdat, calculate_normal_threshold);
- schedule();
+
+ if (!kthread_should_stop())
+ schedule();
+
set_pgdat_percpu_threshold(pgdat, calculate_pressure_threshold);
} else {
if (remaining)
}
/*
- * Called by memory hotplug when all memory in a node is offlined.
+ * Called by memory hotplug when all memory in a node is offlined. Caller must
+ * hold lock_memory_hotplug().
*/
void kswapd_stop(int nid)
{
struct task_struct *kswapd = NODE_DATA(nid)->kswapd;
- if (kswapd)
+ if (kswapd) {
kthread_stop(kswapd);
+ NODE_DATA(nid)->kswapd = NULL;
+ }
}
static int __init kswapd_init(void)
break;
case NETDEV_DOWN:
+ if (dev->features & NETIF_F_HW_VLAN_FILTER)
+ vlan_vid_del(dev, 0);
+
/* Put all VLANs for this dev in the down state too. */
for (i = 0; i < VLAN_N_VID; i++) {
vlandev = vlan_group_get_device(grp, i);
case AX25_P_NETROM:
if (ax25_protocol_is_registered(AX25_P_NETROM))
return -ESOCKTNOSUPPORT;
+ break;
#endif
#ifdef CONFIG_ROSE_MODULE
case AX25_P_ROSE:
* @bat_priv: the bat priv with all the soft interface information
* @skb: the frame to be checked
* @vid: the VLAN ID of the frame
+ * @is_bcast: the packet came in a broadcast packet type.
*
* bla_rx avoidance checks if:
* * we have to race for a claim
* process the skb.
*
*/
-int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid)
+int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid,
+ bool is_bcast)
{
struct ethhdr *ethhdr;
struct claim search_claim, *claim = NULL;
if (unlikely(atomic_read(&bat_priv->bla_num_requests)))
/* don't allow broadcasts while requests are in flight */
- if (is_multicast_ether_addr(ethhdr->h_dest))
+ if (is_multicast_ether_addr(ethhdr->h_dest) && is_bcast)
goto handled;
memcpy(search_claim.addr, ethhdr->h_source, ETH_ALEN);
}
/* if it is a broadcast ... */
- if (is_multicast_ether_addr(ethhdr->h_dest)) {
- /* ... drop it. the responsible gateway is in charge. */
+ if (is_multicast_ether_addr(ethhdr->h_dest) && is_bcast) {
+ /* ... drop it. the responsible gateway is in charge.
+ *
+ * We need to check is_bcast because with the gateway
+ * feature, broadcasts (like DHCP requests) may be sent
+ * using a unicast packet type.
+ */
goto handled;
} else {
/* seems the client considers us as its best gateway.
#define _NET_BATMAN_ADV_BLA_H_
#ifdef CONFIG_BATMAN_ADV_BLA
-int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid);
+int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid,
+ bool is_bcast);
int bla_tx(struct bat_priv *bat_priv, struct sk_buff *skb, short vid);
int bla_is_backbone_gw(struct sk_buff *skb,
struct orig_node *orig_node, int hdr_size);
#else /* ifdef CONFIG_BATMAN_ADV_BLA */
static inline int bla_rx(struct bat_priv *bat_priv, struct sk_buff *skb,
- short vid)
+ short vid, bool is_bcast)
{
return 0;
}
struct bat_priv *bat_priv = netdev_priv(soft_iface);
struct ethhdr *ethhdr;
struct vlan_ethhdr *vhdr;
+ struct batman_header *batadv_header = (struct batman_header *)skb->data;
short vid __maybe_unused = -1;
+ bool is_bcast;
+
+ is_bcast = (batadv_header->packet_type == BAT_BCAST);
/* check if enough space is available for pulling, and pull */
if (!pskb_may_pull(skb, hdr_size))
/* Let the bridge loop avoidance check the packet. If will
* not handle it, we can safely push it up.
*/
- if (bla_rx(bat_priv, skb, vid))
+ if (bla_rx(bat_priv, skb, vid, is_bcast))
goto out;
netif_rx(skb);
static void __exit caif_device_exit(void)
{
- unregister_pernet_subsys(&caif_net_ops);
unregister_netdevice_notifier(&caif_device_notifier);
dev_remove_pack(&caif_packet_type);
+ unregister_pernet_subsys(&caif_net_ops);
}
module_init(caif_device_init);
* dropped messages.
*/
dout("process_connect got RESET peer seq %u\n",
- le32_to_cpu(con->in_connect.connect_seq));
+ le32_to_cpu(con->in_reply.connect_seq));
pr_err("%s%lld %s connection reset\n",
ENTITY_NAME(con->peer_name),
ceph_pr_addr(&con->peer_addr.in_addr));
* If we sent a smaller connect_seq than the peer has, try
* again with a larger value.
*/
- dout("process_connect got RETRY my seq = %u, peer_seq = %u\n",
+ dout("process_connect got RETRY_SESSION my seq %u, peer %u\n",
le32_to_cpu(con->out_connect.connect_seq),
- le32_to_cpu(con->in_connect.connect_seq));
- con->connect_seq = le32_to_cpu(con->in_connect.connect_seq);
+ le32_to_cpu(con->in_reply.connect_seq));
+ con->connect_seq = le32_to_cpu(con->in_reply.connect_seq);
ceph_con_out_kvec_reset(con);
ret = prepare_write_connect(con);
if (ret < 0)
*/
dout("process_connect got RETRY_GLOBAL my %u peer_gseq %u\n",
con->peer_global_seq,
- le32_to_cpu(con->in_connect.global_seq));
+ le32_to_cpu(con->in_reply.global_seq));
get_global_seq(con->msgr,
- le32_to_cpu(con->in_connect.global_seq));
+ le32_to_cpu(con->in_reply.global_seq));
ceph_con_out_kvec_reset(con);
ret = prepare_write_connect(con);
if (ret < 0)
{
struct netprio_map *map = rcu_dereference_bh(skb->dev->priomap);
- if ((!skb->priority) && (skb->sk) && map)
- skb->priority = map->priomap[skb->sk->sk_cgrp_prioidx];
+ if (!skb->priority && skb->sk && map) {
+ unsigned int prioidx = skb->sk->sk_cgrp_prioidx;
+
+ if (prioidx < map->priomap_len)
+ skb->priority = map->priomap[prioidx];
+ }
}
#else
#define skb_update_prio(skb)
/* Initialize per network namespace state */
static int __net_init netdev_init(struct net *net)
{
- INIT_LIST_HEAD(&net->dev_base_head);
+ if (net != &init_net)
+ INIT_LIST_HEAD(&net->dev_base_head);
net->dev_name_head = netdev_create_hash();
if (net->dev_name_head == NULL)
LIST_HEAD(net_namespace_list);
EXPORT_SYMBOL_GPL(net_namespace_list);
-struct net init_net;
+struct net init_net = {
+ .dev_base_head = LIST_HEAD_INIT(init_net.dev_base_head),
+};
EXPORT_SYMBOL(init_net);
#define INITIAL_NET_GEN_PTRS 13 /* +1 for len +2 for rcu_head */
return -ENOSPC;
}
set_bit(prioidx, prioidx_map);
+ if (atomic_read(&max_prioidx) < prioidx)
+ atomic_set(&max_prioidx, prioidx);
spin_unlock_irqrestore(&prioidx_map_lock, flags);
- atomic_set(&max_prioidx, prioidx);
*prio = prioidx;
return 0;
}
spin_unlock_irqrestore(&prioidx_map_lock, flags);
}
-static void extend_netdev_table(struct net_device *dev, u32 new_len)
+static int extend_netdev_table(struct net_device *dev, u32 new_len)
{
size_t new_size = sizeof(struct netprio_map) +
((sizeof(u32) * new_len));
if (!new_priomap) {
pr_warn("Unable to alloc new priomap!\n");
- return;
+ return -ENOMEM;
}
for (i = 0;
rcu_assign_pointer(dev->priomap, new_priomap);
if (old_priomap)
kfree_rcu(old_priomap, rcu);
+ return 0;
}
-static void update_netdev_tables(void)
+static int write_update_netdev_table(struct net_device *dev)
{
+ int ret = 0;
+ u32 max_len;
+ struct netprio_map *map;
+
+ rtnl_lock();
+ max_len = atomic_read(&max_prioidx) + 1;
+ map = rtnl_dereference(dev->priomap);
+ if (!map || map->priomap_len < max_len)
+ ret = extend_netdev_table(dev, max_len);
+ rtnl_unlock();
+
+ return ret;
+}
+
+static int update_netdev_tables(void)
+{
+ int ret = 0;
struct net_device *dev;
- u32 max_len = atomic_read(&max_prioidx) + 1;
+ u32 max_len;
struct netprio_map *map;
rtnl_lock();
+ max_len = atomic_read(&max_prioidx) + 1;
for_each_netdev(&init_net, dev) {
map = rtnl_dereference(dev->priomap);
- if ((!map) ||
- (map->priomap_len < max_len))
- extend_netdev_table(dev, max_len);
+ /*
+ * don't allocate priomap if we didn't
+ * change net_prio.ifpriomap (map == NULL),
+ * this will speed up skb_update_prio.
+ */
+ if (map && map->priomap_len < max_len) {
+ ret = extend_netdev_table(dev, max_len);
+ if (ret < 0)
+ break;
+ }
}
rtnl_unlock();
+ return ret;
}
static struct cgroup_subsys_state *cgrp_create(struct cgroup *cgrp)
{
struct cgroup_netprio_state *cs;
- int ret;
+ int ret = -EINVAL;
cs = kzalloc(sizeof(*cs), GFP_KERNEL);
if (!cs)
return ERR_PTR(-ENOMEM);
- if (cgrp->parent && cgrp_netprio_state(cgrp->parent)->prioidx) {
- kfree(cs);
- return ERR_PTR(-EINVAL);
- }
+ if (cgrp->parent && cgrp_netprio_state(cgrp->parent)->prioidx)
+ goto out;
ret = get_prioidx(&cs->prioidx);
- if (ret != 0) {
+ if (ret < 0) {
pr_warn("No space in priority index array\n");
- kfree(cs);
- return ERR_PTR(ret);
+ goto out;
+ }
+
+ ret = update_netdev_tables();
+ if (ret < 0) {
+ put_prioidx(cs->prioidx);
+ goto out;
}
return &cs->css;
+out:
+ kfree(cs);
+ return ERR_PTR(ret);
}
static void cgrp_destroy(struct cgroup *cgrp)
rtnl_lock();
for_each_netdev(&init_net, dev) {
map = rtnl_dereference(dev->priomap);
- if (map)
+ if (map && cs->prioidx < map->priomap_len)
map->priomap[cs->prioidx] = 0;
}
rtnl_unlock();
rcu_read_lock();
for_each_netdev_rcu(&init_net, dev) {
map = rcu_dereference(dev->priomap);
- priority = map ? map->priomap[prioidx] : 0;
+ priority = (map && prioidx < map->priomap_len) ? map->priomap[prioidx] : 0;
cb->fill(cb, dev->name, priority);
}
rcu_read_unlock();
if (!dev)
goto out_free_devname;
- update_netdev_tables();
- ret = 0;
+ ret = write_update_netdev_table(dev);
+ if (ret < 0)
+ goto out_put_dev;
+
rcu_read_lock();
map = rcu_dereference(dev->priomap);
if (map)
map->priomap[prioidx] = priority;
rcu_read_unlock();
+
+out_put_dev:
dev_put(dev);
out_free_devname:
unsigned int fragsz = SKB_DATA_ALIGN(length + NET_SKB_PAD) +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- if (fragsz <= PAGE_SIZE && !(gfp_mask & __GFP_WAIT)) {
+ if (fragsz <= PAGE_SIZE && !(gfp_mask & (__GFP_WAIT | GFP_DMA))) {
void *data = netdev_alloc_frag(fragsz);
if (likely(data)) {
mtu = dev->mtu;
pr_debug("name = %s, mtu = %u\n", dev->name, mtu);
+ if (size > mtu) {
+ pr_debug("size = %Zu, mtu = %u\n", size, mtu);
+ err = -EINVAL;
+ goto out_dev;
+ }
+
hlen = LL_RESERVED_SPACE(dev);
tlen = dev->needed_tailroom;
skb = sock_alloc_send_skb(sk, hlen + tlen + size,
if (err < 0)
goto out_skb;
- if (size > mtu) {
- pr_debug("size = %Zu, mtu = %u\n", size, mtu);
- err = -EINVAL;
- goto out_skb;
- }
-
skb->dev = dev;
skb->sk = sk;
skb->protocol = htons(ETH_P_IEEE802154);
case CIPSO_V4_TAG_LOCAL:
/* This is a non-standard tag that we only allow for
* local connections, so if the incoming interface is
- * not the loopback device drop the packet. */
- if (!(skb->dev->flags & IFF_LOOPBACK)) {
+ * not the loopback device drop the packet. Further,
+ * there is no legitimate reason for setting this from
+ * userspace so reject it if skb is NULL. */
+ if (skb == NULL || !(skb->dev->flags & IFF_LOOPBACK)) {
err_offset = opt_iter;
goto validate_return_locked;
}
sdata->name, mgmt->sa, status_code);
ieee80211_destroy_assoc_data(sdata, false);
} else {
- printk(KERN_DEBUG "%s: associated\n", sdata->name);
-
if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) {
/* oops -- internal error -- send timeout for now */
- ieee80211_destroy_assoc_data(sdata, true);
- sta_info_destroy_addr(sdata, mgmt->bssid);
+ ieee80211_destroy_assoc_data(sdata, false);
cfg80211_put_bss(*bss);
return RX_MGMT_CFG80211_ASSOC_TIMEOUT;
}
+ printk(KERN_DEBUG "%s: associated\n", sdata->name);
/*
* destroy assoc_data afterwards, as otherwise an idle
max_rates = sband->n_bitrates;
}
- msp = kzalloc(sizeof(struct minstrel_ht_sta), gfp);
+ msp = kzalloc(sizeof(*msp), gfp);
if (!msp)
return NULL;
{
struct net_device *dev = ptr;
struct net *net = dev_net(dev);
+ struct netns_ipvs *ipvs = net_ipvs(net);
struct ip_vs_service *svc;
struct ip_vs_dest *dest;
unsigned int idx;
- if (event != NETDEV_UNREGISTER)
+ if (event != NETDEV_UNREGISTER || !ipvs)
return NOTIFY_DONE;
IP_VS_DBG(3, "%s() dev=%s\n", __func__, dev->name);
EnterFunction(2);
}
}
- list_for_each_entry(dest, &net_ipvs(net)->dest_trash, n_list) {
+ list_for_each_entry(dest, &ipvs->dest_trash, n_list) {
__ip_vs_dev_reset(dest, dev);
}
mutex_unlock(&__ip_vs_mutex);
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter/xt_set.h>
+#include <linux/netfilter/ipset/ip_set_timeout.h>
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
info->del_set.flags, 0, UINT_MAX);
/* Normalize to fit into jiffies */
- if (add_opt.timeout > UINT_MAX/MSEC_PER_SEC)
+ if (add_opt.timeout != IPSET_NO_TIMEOUT &&
+ add_opt.timeout > UINT_MAX/MSEC_PER_SEC)
add_opt.timeout = UINT_MAX/MSEC_PER_SEC;
if (info->add_set.index != IPSET_INVALID_ID)
ip_set_add(info->add_set.index, skb, par, &add_opt);
pr_debug("%p\n", sk);
- if (llcp_sock == NULL)
+ if (llcp_sock == NULL || llcp_sock->dev == NULL)
return -EBADFD;
addr->sa_family = AF_NFC;
return peer;
new_UDP_peer:
- _net("Rx UDP DGRAM from NEW peer %d", peer->debug_id);
+ _net("Rx UDP DGRAM from NEW peer");
read_unlock_bh(&rxrpc_peer_lock);
_leave(" = -EBUSY [new]");
return ERR_PTR(-EBUSY);
return PSCHED_NS2TICKS(ticks);
}
-static int tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch)
+static void tfifo_enqueue(struct sk_buff *nskb, struct Qdisc *sch)
{
struct sk_buff_head *list = &sch->q;
psched_time_t tnext = netem_skb_cb(nskb)->time_to_send;
- struct sk_buff *skb;
-
- if (likely(skb_queue_len(list) < sch->limit)) {
- skb = skb_peek_tail(list);
- /* Optimize for add at tail */
- if (likely(!skb || tnext >= netem_skb_cb(skb)->time_to_send))
- return qdisc_enqueue_tail(nskb, sch);
+ struct sk_buff *skb = skb_peek_tail(list);
- skb_queue_reverse_walk(list, skb) {
- if (tnext >= netem_skb_cb(skb)->time_to_send)
- break;
- }
+ /* Optimize for add at tail */
+ if (likely(!skb || tnext >= netem_skb_cb(skb)->time_to_send))
+ return __skb_queue_tail(list, nskb);
- __skb_queue_after(list, skb, nskb);
- sch->qstats.backlog += qdisc_pkt_len(nskb);
- return NET_XMIT_SUCCESS;
+ skb_queue_reverse_walk(list, skb) {
+ if (tnext >= netem_skb_cb(skb)->time_to_send)
+ break;
}
- return qdisc_reshape_fail(nskb, sch);
+ __skb_queue_after(list, skb, nskb);
}
/*
/* We don't fill cb now as skb_unshare() may invalidate it */
struct netem_skb_cb *cb;
struct sk_buff *skb2;
- int ret;
int count = 1;
/* Random duplication */
skb->data[net_random() % skb_headlen(skb)] ^= 1<<(net_random() % 8);
}
+ if (unlikely(skb_queue_len(&sch->q) >= sch->limit))
+ return qdisc_reshape_fail(skb, sch);
+
+ sch->qstats.backlog += qdisc_pkt_len(skb);
+
cb = netem_skb_cb(skb);
if (q->gap == 0 || /* not doing reordering */
q->counter < q->gap - 1 || /* inside last reordering gap */
cb->time_to_send = now + delay;
++q->counter;
- ret = tfifo_enqueue(skb, sch);
+ tfifo_enqueue(skb, sch);
} else {
/*
* Do re-ordering by putting one out of N packets at the front
q->counter = 0;
__skb_queue_head(&sch->q, skb);
- sch->qstats.backlog += qdisc_pkt_len(skb);
sch->qstats.requeues++;
- ret = NET_XMIT_SUCCESS;
- }
-
- if (ret != NET_XMIT_SUCCESS) {
- if (net_xmit_drop_count(ret)) {
- sch->qstats.drops++;
- return ret;
- }
}
return NET_XMIT_SUCCESS;
sch->qstats.backlog = q->qdisc->qstats.backlog;
opts = nla_nest_start(skb, TCA_OPTIONS);
+ if (opts == NULL)
+ goto nla_put_failure;
if (nla_put(skb, TCA_SFB_PARMS, sizeof(opt), &opt))
goto nla_put_failure;
return nla_nest_end(skb, opts);
epb = &ep->base;
- if (hlist_unhashed(&epb->node))
- return;
-
epb->hashent = sctp_ep_hashfn(epb->bind_addr.port);
head = &sctp_ep_hashtable[epb->hashent];
sctp_write_lock(&head->lock);
- __hlist_del(&epb->node);
+ hlist_del_init(&epb->node);
sctp_write_unlock(&head->lock);
}
head = &sctp_assoc_hashtable[epb->hashent];
sctp_write_lock(&head->lock);
- __hlist_del(&epb->node);
+ hlist_del_init(&epb->node);
sctp_write_unlock(&head->lock);
}
SCTP_DEBUG_PRINTK("About to exit __sctp_connect() free asoc: %p"
" kaddrs: %p err: %d\n",
asoc, kaddrs, err);
- if (asoc)
+ if (asoc) {
+ /* sctp_primitive_ASSOCIATE may have added this association
+ * To the hash table, try to unhash it, just in case, its a noop
+ * if it wasn't hashed so we're safe
+ */
+ sctp_unhash_established(asoc);
sctp_association_free(asoc);
+ }
return err;
}
goto out_unlock;
out_free:
- if (new_asoc)
+ if (new_asoc) {
+ sctp_unhash_established(asoc);
sctp_association_free(asoc);
+ }
out_unlock:
sctp_release_sock(sk);
ATTR_ATIME_SET | ATTR_MTIME_SET | ATTR_TIMES_SET))
return dentry_has_perm(cred, dentry, FILE__SETATTR);
- if (ia_valid & ATTR_SIZE)
+ if (selinux_policycap_openperm && (ia_valid & ATTR_SIZE))
av |= FILE__OPEN;
return dentry_has_perm(cred, dentry, av);
"node_bind", "name_connect", NULL } },
{ "memprotect", { "mmap_zero", NULL } },
{ "peer", { "recv", NULL } },
- { "capability2", { "mac_override", "mac_admin", "syslog", NULL } },
+ { "capability2",
+ { "mac_override", "mac_admin", "syslog", "wake_alarm", "block_suspend",
+ NULL } },
{ "kernel_service", { "use_as_override", "create_files_as", NULL } },
{ "tun_socket",
{ COMMON_SOCK_PERMS, NULL } },
{
struct list_head *p;
struct snd_usb_endpoint *ep;
- int ret, is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
+ int is_playback = direction == SNDRV_PCM_STREAM_PLAYBACK;
mutex_lock(&chip->mutex);
type == SND_USB_ENDPOINT_TYPE_DATA ? "data" : "sync",
ep_num);
- /* select the alt setting once so the endpoints become valid */
- ret = usb_set_interface(chip->dev, alts->desc.bInterfaceNumber,
- alts->desc.bAlternateSetting);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- ep = NULL;
- goto __exit_unlock;
- }
-
ep = kzalloc(sizeof(*ep), GFP_KERNEL);
if (!ep)
goto __exit_unlock;
if (++ep->use_count != 1)
return 0;
- if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
- return -EINVAL;
-
/* just to be sure */
deactivate_urbs(ep, 0, 1);
wait_clear_urbs(ep);
if (snd_BUG_ON(ep->use_count == 0))
return;
- if (snd_BUG_ON(!test_bit(EP_FLAG_ACTIVATED, &ep->flags)))
- return;
-
if (--ep->use_count == 0) {
deactivate_urbs(ep, force, can_sleep);
ep->data_subs = NULL;
}
/**
- * snd_usb_endpoint_activate: activate an snd_usb_endpoint
- *
- * @ep: the endpoint to activate
- *
- * If the endpoint is not currently in use, this functions will select the
- * correct alternate interface setting for the interface of this endpoint.
- *
- * In case of any active users, this functions does nothing.
- *
- * Returns an error if usb_set_interface() failed, 0 in all other
- * cases.
- */
-int snd_usb_endpoint_activate(struct snd_usb_endpoint *ep)
-{
- if (ep->use_count != 0)
- return 0;
-
- if (!ep->chip->shutdown &&
- !test_and_set_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
- int ret;
-
- ret = usb_set_interface(ep->chip->dev, ep->iface, ep->alt_idx);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s() usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
- return ret;
- }
-
- return 0;
- }
-
- return -EBUSY;
-}
-
-/**
* snd_usb_endpoint_deactivate: deactivate an snd_usb_endpoint
*
* @ep: the endpoint to deactivate
if (!ep)
return -EINVAL;
+ deactivate_urbs(ep, 1, 1);
+ wait_clear_urbs(ep);
+
if (ep->use_count != 0)
return 0;
- if (!ep->chip->shutdown &&
- test_and_clear_bit(EP_FLAG_ACTIVATED, &ep->flags)) {
- int ret;
-
- ret = usb_set_interface(ep->chip->dev, ep->iface, 0);
- if (ret < 0) {
- snd_printk(KERN_ERR "%s(): usb_set_interface() failed, ret = %d\n",
- __func__, ret);
- return ret;
- }
+ clear_bit(EP_FLAG_ACTIVATED, &ep->flags);
- return 0;
- }
-
- return -EBUSY;
+ return 0;
}
/**
force, can_sleep, wait);
}
-static int activate_endpoints(struct snd_usb_substream *subs)
-{
- if (subs->sync_endpoint) {
- int ret;
-
- ret = snd_usb_endpoint_activate(subs->sync_endpoint);
- if (ret < 0)
- return ret;
- }
-
- return snd_usb_endpoint_activate(subs->data_endpoint);
-}
-
static int deactivate_endpoints(struct snd_usb_substream *subs)
{
int reta, retb;
if (fmt == subs->cur_audiofmt)
return 0;
+ /* close the old interface */
+ if (subs->interface >= 0 && subs->interface != fmt->iface) {
+ err = usb_set_interface(subs->dev, subs->interface, 0);
+ if (err < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: return to setting 0 failed (%d)\n",
+ dev->devnum, fmt->iface, fmt->altsetting, err);
+ return -EIO;
+ }
+ subs->interface = -1;
+ subs->altset_idx = 0;
+ }
+
+ /* set interface */
+ if (subs->interface != fmt->iface ||
+ subs->altset_idx != fmt->altset_idx) {
+ err = usb_set_interface(dev, fmt->iface, fmt->altsetting);
+ if (err < 0) {
+ snd_printk(KERN_ERR "%d:%d:%d: usb_set_interface failed (%d)\n",
+ dev->devnum, fmt->iface, fmt->altsetting, err);
+ return -EIO;
+ }
+ snd_printdd(KERN_INFO "setting usb interface %d:%d\n",
+ fmt->iface, fmt->altsetting);
+ subs->interface = fmt->iface;
+ subs->altset_idx = fmt->altset_idx;
+ }
+
subs->data_endpoint = snd_usb_add_endpoint(subs->stream->chip,
alts, fmt->endpoint, subs->direction,
SND_USB_ENDPOINT_TYPE_DATA);
subs->data_endpoint->sync_master = subs->sync_endpoint;
}
- if ((err = snd_usb_init_pitch(subs->stream->chip, subs->interface, alts, fmt)) < 0)
+ if ((err = snd_usb_init_pitch(subs->stream->chip, fmt->iface, alts, fmt)) < 0)
return err;
subs->cur_audiofmt = fmt;
struct usb_interface *iface;
iface = usb_ifnum_to_if(subs->dev, fmt->iface);
alts = &iface->altsetting[fmt->altset_idx];
- ret = snd_usb_init_sample_rate(subs->stream->chip, subs->interface, alts, fmt, rate);
+ ret = snd_usb_init_sample_rate(subs->stream->chip, fmt->iface, alts, fmt, rate);
if (ret < 0)
return ret;
subs->cur_rate = rate;
mutex_lock(&subs->stream->chip->shutdown_mutex);
/* format changed */
stop_endpoints(subs, 0, 0, 0);
- deactivate_endpoints(subs);
-
- ret = activate_endpoints(subs);
- if (ret < 0)
- goto unlock;
-
ret = snd_usb_endpoint_set_params(subs->data_endpoint, hw_params, fmt,
subs->sync_endpoint);
if (ret < 0)
subs->period_bytes = 0;
mutex_lock(&subs->stream->chip->shutdown_mutex);
stop_endpoints(subs, 0, 1, 1);
+ deactivate_endpoints(subs);
mutex_unlock(&subs->stream->chip->shutdown_mutex);
return snd_pcm_lib_free_vmalloc_buffer(substream);
}
static int snd_usb_pcm_close(struct snd_pcm_substream *substream, int direction)
{
- int ret;
struct snd_usb_stream *as = snd_pcm_substream_chip(substream);
struct snd_usb_substream *subs = &as->substream[direction];
stop_endpoints(subs, 0, 0, 0);
- ret = deactivate_endpoints(subs);
+
+ if (!as->chip->shutdown && subs->interface >= 0) {
+ usb_set_interface(subs->dev, subs->interface, 0);
+ subs->interface = -1;
+ }
+
subs->pcm_substream = NULL;
snd_usb_autosuspend(subs->stream->chip);
- return ret;
+ return 0;
}
/* Since a URB can handle only a single linear buffer, we must use double
struct machine *machines__findnew(struct rb_root *self, pid_t pid)
{
char path[PATH_MAX];
- const char *root_dir;
+ const char *root_dir = "";
struct machine *machine = machines__find(self, pid);
- if (!machine || machine->pid != pid) {
- if (pid == HOST_KERNEL_ID || pid == DEFAULT_GUEST_KERNEL_ID)
- root_dir = "";
- else {
- if (!symbol_conf.guestmount)
- goto out;
- sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
- if (access(path, R_OK)) {
- pr_err("Can't access file %s\n", path);
- goto out;
- }
- root_dir = path;
+ if (machine && (machine->pid == pid))
+ goto out;
+
+ if ((pid != HOST_KERNEL_ID) &&
+ (pid != DEFAULT_GUEST_KERNEL_ID) &&
+ (symbol_conf.guestmount)) {
+ sprintf(path, "%s/%d", symbol_conf.guestmount, pid);
+ if (access(path, R_OK)) {
+ pr_err("Can't access file %s\n", path);
+ machine = NULL;
+ goto out;
}
- machine = machines__add(self, pid, root_dir);
+ root_dir = path;
}
+ machine = machines__add(self, pid, root_dir);
+
out:
return machine;
}
else
pid = event->ip.pid;
- return perf_session__find_machine(session, pid);
+ return perf_session__findnew_machine(session, pid);
}
return perf_session__find_host_machine(session);
record.data = data;
trace_seq_init(&s);
- pevent_print_event(pevent, &s, &record);
+ pevent_event_info(&s, event, &record);
trace_seq_do_printf(&s);
- printf("\n");
}
void print_event(int cpu, void *data, int size, unsigned long long nsecs,
}
#ifdef __KVM_HAVE_MSI
+static irqreturn_t kvm_assigned_dev_msi(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
static int assigned_device_enable_host_msi(struct kvm *kvm,
struct kvm_assigned_dev_kernel *dev)
{
}
dev->host_irq = dev->dev->irq;
- if (request_threaded_irq(dev->host_irq, NULL,
+ if (request_threaded_irq(dev->host_irq, kvm_assigned_dev_msi,
kvm_assigned_dev_thread_msi, 0,
dev->irq_name, dev)) {
pci_disable_msi(dev->dev);
#endif
#ifdef __KVM_HAVE_MSIX
+static irqreturn_t kvm_assigned_dev_msix(int irq, void *dev_id)
+{
+ return IRQ_WAKE_THREAD;
+}
+
static int assigned_device_enable_host_msix(struct kvm *kvm,
struct kvm_assigned_dev_kernel *dev)
{
for (i = 0; i < dev->entries_nr; i++) {
r = request_threaded_irq(dev->host_msix_entries[i].vector,
- NULL, kvm_assigned_dev_thread_msix,
+ kvm_assigned_dev_msix,
+ kvm_assigned_dev_thread_msix,
0, dev->irq_name, dev);
if (r)
goto err;