[ARM] Kirkwood: add Marvell 88F6281 GTW GE board support

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index bde56f4..0a1abb9 100644 (file)
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -182,6 +182,7 @@ CONFIG_ARCH_KIRKWOOD=y
 CONFIG_MACH_DB88F6281_BP=y
 CONFIG_MACH_RD88F6192_NAS=y
 CONFIG_MACH_RD88F6281=y
+CONFIG_MACH_MV88F6281GTW_GE=y
 CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_TS219=y
 CONFIG_PLAT_ORION=y

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index b5421cc..25100f7 100644 (file)
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -20,6 +20,12 @@ config MACH_RD88F6281
          Say 'Y' here if you want your kernel to support the
          Marvell RD-88F6281 Reference Board.
 
+config MACH_MV88F6281GTW_GE
+       bool "Marvell 88F6281 GTW GE Board"
+       help
+         Say 'Y' here if you want your kernel to support the
+         Marvell 88F6281 GTW GE Board.
+
 config MACH_SHEEVAPLUG
        bool "Marvell SheevaPlug Reference Board"
        help

diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index f21f35d..9dd680e 100644 (file)
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -3,6 +3,7 @@ obj-y                           += common.o addr-map.o irq.o pcie.o mpp.o
 obj-$(CONFIG_MACH_DB88F6281_BP)                += db88f6281-bp-setup.o
 obj-$(CONFIG_MACH_RD88F6192_NAS)       += rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)           += rd88f6281-setup.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE)     += mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)          += sheevaplug-setup.o
 obj-$(CONFIG_MACH_TS219)               += ts219-setup.o
 

diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
new file mode 100644 (file)
index 0000000..4fb03f4
--- /dev/null
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+       .phy_addr       = MV643XX_ETH_PHY_NONE,
+       .speed          = SPEED_1000,
+       .duplex         = DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+       .port_names[0]  = "lan1",
+       .port_names[1]  = "lan2",
+       .port_names[2]  = "lan3",
+       .port_names[3]  = "lan4",
+       .port_names[4]  = "wan",
+       .port_names[5]  = "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+       .nr_chips       = 1,
+       .chip           = &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+       .type           = "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+       {
+               .modalias       = "m25p80",
+               .platform_data  = &mv88f6281gtw_ge_spi_slave_data,
+               .irq            = -1,
+               .max_speed_hz   = 50000000,
+               .bus_num        = 0,
+               .chip_select    = 0,
+       },
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+       /*
+        * Basic setup. Needs to be called early.
+        */
+       kirkwood_init();
+
+       kirkwood_ehci_init();
+       kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+       kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+       spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+                               ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+       kirkwood_spi_init();
+       kirkwood_uart0_init();
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+       if (machine_is_mv88f6281gtw_ge())
+               kirkwood_pcie_init();
+
+       return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+       /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+       .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
+       .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
+       .init_machine   = mv88f6281gtw_ge_init,
+       .map_io         = kirkwood_map_io,
+       .init_irq       = kirkwood_init_irq,
+       .timer          = &kirkwood_timer,
+MACHINE_END