ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv

"usb-nop-xceiv" is using the phy binding, but is missing #phy-cells
property. This is probably because the binding was the precursor to the phy
binding.

Fixes the following warning in i.MX dts files:

Warning (phys_property): Missing property '#phy-cells' in node ...

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 09ce8b8..c43cf70 100644 (file)
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -628,11 +628,13 @@
                usbphy0: usb-phy@0 {
                        reg = <0>;
                        compatible = "usb-nop-xceiv";
+                       #phy-cells = <0>;
                };
 
                usbphy1: usb-phy@1 {
                        reg = <1>;
                        compatible = "usb-nop-xceiv";
+                       #phy-cells = <0>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 96f442b..2a140c8 100644 (file)
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -30,6 +30,7 @@
                        reg = <0>;
                        clocks = <&clks IMX27_CLK_DUMMY>;
                        clock-names = "main_clk";
+                       #phy-cells = <0>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 2a9198f..2ed2d73 100644 (file)
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -63,6 +63,7 @@
                        vcc-supply = <&reg_5v0>;
                        clocks = <&clks IMX27_CLK_DUMMY>;
                        clock-names = "main_clk";
+                       #phy-cells = <0>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index c973c5d..c9095b7 100644 (file)
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -53,6 +53,7 @@
                        vcc-supply = <&sw3_reg>;
                        clocks = <&clks IMX27_CLK_DUMMY>;
                        clock-names = "main_clk";
+                       #phy-cells = <0>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 6d5e6a6..f049c69 100644 (file)
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -402,11 +402,13 @@
                usbphy0: usb-phy@0 {
                        reg = <0>;
                        compatible = "usb-nop-xceiv";
+                       #phy-cells = <0>;
                };
 
                usbphy1: usb-phy@1 {
                        reg = <1>;
                        compatible = "usb-nop-xceiv";
+                       #phy-cells = <0>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 2a694c5..c4aa53c 100644 (file)
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -165,6 +165,7 @@
                        clocks = <&clks IMX5_CLK_DUMMY>;
                        clock-names = "main_clk";
                        reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+                       #phy-cells = <0>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 1305b05..b3d952f 100644 (file)
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -94,6 +94,7 @@
                        clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
                        clock-names = "main_clk";
                        clock-frequency = <19200000>;
+                       #phy-cells = <0>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 378be72..00d30bd 100644 (file)
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -113,6 +113,7 @@
                        reg = <0>;
                        clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
                        clock-names = "main_clk";
+                       #phy-cells = <0>;
                };
        };
 

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 84f17f7..fb6cdd6 100644 (file)
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -303,6 +303,7 @@
                                compatible = "usb-nop-xceiv";
                                clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
                                clock-names = "main_clk";
+                               #phy-cells = <0>;
                                status = "okay";
                        };
 
@@ -310,6 +311,7 @@
                                compatible = "usb-nop-xceiv";
                                clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
                                clock-names = "main_clk";
+                               #phy-cells = <0>;
                                status = "okay";
                        };
 

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 8b9c8c0..7878257 100644 (file)
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -109,6 +109,7 @@
                compatible = "usb-nop-xceiv";
                clocks = <&clks IMX7D_USB_PHY2_CLK>;
                clock-names = "main_clk";
+               #phy-cells = <0>;
        };
 
        fec2: ethernet@30bf0000 {

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 966b97f..e718fd2 100644 (file)
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -949,12 +949,14 @@
                                compatible = "usb-nop-xceiv";
                                clocks = <&clks IMX7D_USB_PHY1_CLK>;
                                clock-names = "main_clk";
+                               #phy-cells = <0>;
                        };
 
                        usbphynop3: usbphynop3 {
                                compatible = "usb-nop-xceiv";
                                clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
                                clock-names = "main_clk";
+                               #phy-cells = <0>;
                        };
 
                        usdhc1: usdhc@30b40000 {