mtd: nand: denali_dt: add compatible strings for UniPhier SoC variants

Add two compatible strings for UniPhier SoC family.

"socionext,uniphier-denali-nand-v5a" is used on UniPhier sLD3, LD4,
Pro4, sLD8.

"socionext,uniphier-denali-nand-v5b" is used on UniPhier Pro5, PXs2,
LD6b, LD11, LD20.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>

diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt
index b7742a7..504291d 100644 (file)
--- a/Documentation/devicetree/bindings/mtd/denali-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt
@@ -3,6 +3,8 @@
 Required properties:
   - compatible : should be one of the following:
       "altr,socfpga-denali-nand"            - for Altera SOCFPGA
+      "socionext,uniphier-denali-nand-v5a"  - for Socionext UniPhier (v5a)
+      "socionext,uniphier-denali-nand-v5b"  - for Socionext UniPhier (v5b)
   - reg : should contain registers location and length for data and reg.
   - reg-names: Should contain the reg names "nand_data" and "denali_reg"
   - interrupts : The interrupt number.
@@ -10,8 +12,12 @@ Required properties:
 Optional properties:
   - nand-ecc-step-size: see nand.txt for details.  If present, the value must be
       512        for "altr,socfpga-denali-nand"
+      1024       for "socionext,uniphier-denali-nand-v5a"
+      1024       for "socionext,uniphier-denali-nand-v5b"
   - nand-ecc-strength: see nand.txt for details.  Valid values are:
       8, 15      for "altr,socfpga-denali-nand"
+      8, 16, 24  for "socionext,uniphier-denali-nand-v5a"
+      8, 16      for "socionext,uniphier-denali-nand-v5b"
   - nand-ecc-maximize: see nand.txt for details
 
 The device tree may optionally contain sub-nodes describing partitions of the

diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
index bd1aa4c..be59823 100644 (file)
--- a/drivers/mtd/nand/denali_dt.c
+++ b/drivers/mtd/nand/denali_dt.c
@@ -42,11 +42,36 @@ static const struct denali_dt_data denali_socfpga_data = {
        .ecc_caps = &denali_socfpga_ecc_caps,
 };
 
+NAND_ECC_CAPS_SINGLE(denali_uniphier_v5a_ecc_caps, denali_calc_ecc_bytes,
+                    1024, 8, 16, 24);
+static const struct denali_dt_data denali_uniphier_v5a_data = {
+       .caps = DENALI_CAP_HW_ECC_FIXUP |
+               DENALI_CAP_DMA_64BIT,
+       .ecc_caps = &denali_uniphier_v5a_ecc_caps,
+};
+
+NAND_ECC_CAPS_SINGLE(denali_uniphier_v5b_ecc_caps, denali_calc_ecc_bytes,
+                    1024, 8, 16);
+static const struct denali_dt_data denali_uniphier_v5b_data = {
+       .revision = 0x0501,
+       .caps = DENALI_CAP_HW_ECC_FIXUP |
+               DENALI_CAP_DMA_64BIT,
+       .ecc_caps = &denali_uniphier_v5b_ecc_caps,
+};
+
 static const struct of_device_id denali_nand_dt_ids[] = {
        {
                .compatible = "altr,socfpga-denali-nand",
                .data = &denali_socfpga_data,
        },
+       {
+               .compatible = "socionext,uniphier-denali-nand-v5a",
+               .data = &denali_uniphier_v5a_data,
+       },
+       {
+               .compatible = "socionext,uniphier-denali-nand-v5b",
+               .data = &denali_uniphier_v5b_data,
+       },
        { /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);