wifi: ath11k: Split PCI write/read functions

ath11k_pcic_write32/read32 tries to do wake up before doing actual
write/read work, which means each time a u32 is written/read, wake
up is performed. This is not necessary in case where we do a
large amount of write/read, because only one time of wake up is needed.
So split each one into two parts, the first part does wake up and
release, and the second one does actual write/read work.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220802075533.1744-2-quic_bqiang@quicinc.com

diff --git a/drivers/net/wireless/ath/ath11k/pcic.c b/drivers/net/wireless/ath/ath11k/pcic.c
index 1adf20e..4d0c039 100644 (file)
--- a/drivers/net/wireless/ath/ath11k/pcic.c
+++ b/drivers/net/wireless/ath/ath11k/pcic.c
@@ -140,49 +140,63 @@ int ath11k_pcic_init_msi_config(struct ath11k_base *ab)
 }
 EXPORT_SYMBOL(ath11k_pcic_init_msi_config);
 
+static void __ath11k_pcic_write32(struct ath11k_base *ab, u32 offset, u32 value)
+{
+       if (offset < ATH11K_PCI_WINDOW_START)
+               iowrite32(value, ab->mem  + offset);
+       else
+               ab->pci.ops->window_write32(ab, offset, value);
+}
+
 void ath11k_pcic_write32(struct ath11k_base *ab, u32 offset, u32 value)
 {
        int ret = 0;
+       bool wakeup_required;
 
        /* for offset beyond BAR + 4K - 32, may
         * need to wakeup the device to access.
         */
-       if (test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
-           offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF && ab->pci.ops->wakeup)
+       wakeup_required = test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
+                         offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF;
+       if (wakeup_required && ab->pci.ops->wakeup)
                ret = ab->pci.ops->wakeup(ab);
 
-       if (offset < ATH11K_PCI_WINDOW_START)
-               iowrite32(value, ab->mem  + offset);
-       else
-               ab->pci.ops->window_write32(ab, offset, value);
+       __ath11k_pcic_write32(ab, offset, value);
 
-       if (test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
-           offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF && ab->pci.ops->release &&
-           !ret)
+       if (wakeup_required && !ret && ab->pci.ops->release)
                ab->pci.ops->release(ab);
 }
 EXPORT_SYMBOL(ath11k_pcic_write32);
 
+static u32 __ath11k_pcic_read32(struct ath11k_base *ab, u32 offset)
+{
+       u32 val;
+
+       if (offset < ATH11K_PCI_WINDOW_START)
+               val = ioread32(ab->mem + offset);
+       else
+               val = ab->pci.ops->window_read32(ab, offset);
+
+       return val;
+}
+
 u32 ath11k_pcic_read32(struct ath11k_base *ab, u32 offset)
 {
        int ret = 0;
        u32 val;
+       bool wakeup_required;
 
        /* for offset beyond BAR + 4K - 32, may
         * need to wakeup the device to access.
         */
-       if (test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
-           offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF && ab->pci.ops->wakeup)
+       wakeup_required = test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
+                         offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF;
+       if (wakeup_required && ab->pci.ops->wakeup)
                ret = ab->pci.ops->wakeup(ab);
 
-       if (offset < ATH11K_PCI_WINDOW_START)
-               val = ioread32(ab->mem + offset);
-       else
-               val = ab->pci.ops->window_read32(ab, offset);
+       val = __ath11k_pcic_read32(ab, offset);
 
-       if (test_bit(ATH11K_FLAG_DEVICE_INIT_DONE, &ab->dev_flags) &&
-           offset >= ATH11K_PCI_ACCESS_ALWAYS_OFF && ab->pci.ops->release &&
-           !ret)
+       if (wakeup_required && !ret && ab->pci.ops->release)
                ab->pci.ops->release(ab);
 
        return val;