+2006-05-29 Jim Meyering <jim@meyering.net>
+
+ * config.guess, config.rpath, config.sub, install-sh:
+ * mkinstalldirs, texinfo.tex: Update from gnulib.
+
2006-02-14 Paul Eggert <eggert@cs.ucla.edu>
* install-sh: Update from gnulib.
# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
# Inc.
-timestamp='2006-04-26'
+timestamp='2006-05-13'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
LIBC=gnulibc1
# endif
#else
- #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__sun)
+ #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
LIBC=gnu
#else
LIBC=gnuaout
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
-# Copyright 1996-2005 Free Software Foundation, Inc.
+# Copyright 1996-2006 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# known workaround is to choose shorter directory names for the build
# directory and/or the installation directory.
-# All known linkers require a `.a' archive for static linking (except M$VC,
+# All known linkers require a `.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
shrext=.so
host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-cc_basename=`echo "$CC" | sed -e 's%^.*/%%'`
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
wl='-Wl,'
;;
darwin*)
- case "$cc_basename" in
+ case $cc_basename in
xlc*)
wl='-Wl,'
;;
como)
wl='-lopt='
;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
esac
;;
osf3* | osf4* | osf5*)
with_gnu_ld=no
fi
;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
openbsd*)
with_gnu_ld=no
;;
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
case "$host_os" in
aix3* | aix4* | aix5*)
# On AIX/PPC, the GNU linker is very broken
ld_shlibs=no
fi
;;
+ interix3*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
netbsd*)
;;
- solaris* | sysv5*)
+ solaris*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
ld_shlibs=no
fi
;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
sunos4*)
hardcode_direct=yes
;;
- linux*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- :
- else
- ld_shlibs=no
- fi
- ;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
fi
;;
esac
- if test "$ld_shlibs" = yes; then
- # Unlike libtool, we use -rpath here, not --rpath, since the documented
- # option of GNU ld is called -rpath, not --rpath.
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
fi
else
case "$host_os" in
break
fi
done
+ ;;
esac
fi
hardcode_direct=yes
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
+ ;;
esac
fi
# Begin _LT_AC_SYS_LIBPATH_AIX.
if test "$GCC" = yes ; then
:
else
- case "$cc_basename" in
+ case $cc_basename in
xlc*)
;;
*)
# but as the default location of the library.
hardcode_minus_L=yes
;;
- hpux10* | hpux11*)
+ hpux10*)
if test "$with_gnu_ld" = no; then
- case "$host_cpu" in
- hppa*64*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
- hardcode_direct=no
- ;;
- ia64*)
- hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
hardcode_direct=no
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- hardcode_minus_L=yes
;;
*)
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
- hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
fi
hardcode_libdir_separator=:
;;
- sco3.2v5*)
- ;;
solaris*)
hardcode_libdir_flag_spec='-R$libdir'
;;
ld_shlibs=yes
fi
;;
- sysv4.2uw2*)
- hardcode_direct=yes
- hardcode_minus_L=no
- ;;
- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
;;
- sysv5*)
- hardcode_libdir_flag_spec=
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
;;
uts4*)
hardcode_libdir_flag_spec='-L$libdir'
;;
kfreebsd*-gnu)
;;
- freebsd*)
+ freebsd* | dragonfly*)
;;
gnu*)
;;
hpux9* | hpux10* | hpux11*)
- case "$host_cpu" in
+ case $host_cpu in
ia64*)
shrext=.so
;;
;;
esac
;;
+ interix3*)
+ ;;
irix5* | irix6* | nonstopux*)
case "$host_os" in
irix5* | nonstopux*)
;;
osf3* | osf4* | osf5*)
;;
- sco3.2v5*)
- ;;
solaris*)
;;
sunos4*)
;;
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ sysv4 | sysv4.3*)
;;
sysv4*MP*)
;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ ;;
uts4*)
;;
esac
# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
# Inc.
-timestamp='2006-03-07'
+timestamp='2006-05-13'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
- | m32r | m32rle | m68000 | m68k | m88k | maxq | mb | microblaze | mcore \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
- | strongarm \
+ | spu | strongarm \
| tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
| z8k)
basic_machine=$basic_machine-unknown
;;
- m32c)
- basic_machine=$basic_machine-unknown
- ;;
m6811 | m68hc11 | m6812 | m68hc12)
# Motorola 68HC11/12.
basic_machine=$basic_machine-unknown
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
- | m32r-* | m32rle-* \
+ | m32c-* | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | maxq-* | mcore-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| ymp-* \
| z8k-*)
;;
- m32c-*)
- ;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
# system, and we'll never get to this point.
case $basic_machine in
+ spu-*)
+ os=-elf
+ ;;
*-acorn)
os=-riscix1.2
;;
arm*-semi)
os=-aout
;;
- c4x-* | tic4x-*)
- os=-coff
- ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
# This must come before the *-dec entry.
pdp10-*)
os=-tops20
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2006-04-25.22
+scriptversion=2006-05-11.20
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
+nl='
+'
+IFS=" "" $nl"
+
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
-# put in absolute paths if you don't have them in your path; or use env. vars.
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
# step, checking for races as we go.
case $dstdir in
- /*) pathcomp=/ ;;
- -*) pathcomp=./ ;;
- *) pathcomp= ;;
+ /*) prefix=/ ;;
+ -*) prefix=./ ;;
+ *) prefix= ;;
esac
case $posix_glob in
$posix_glob && set +f
IFS=$oIFS
+ prefixes=
+
for d
do
- test "x$d" = x && continue
+ test -z "$d" && continue
- pathcomp=$pathcomp$d
- if test ! -d "$pathcomp"; then
- $mkdirprog "$pathcomp"
- # Don't fail if two instances are running concurrently.
- test -d "$pathcomp" || exit 1
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ $mkdirprog -m "$mkdir_mode" -p -- "$dstdir" && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
fi
- pathcomp=$pathcomp/
+ prefix=$prefix/
done
- obsolete_mkdir_used=true
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ eval "\$mkdirprog $prefixes" || test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
fi
fi
#! /bin/sh
# mkinstalldirs --- make directory hierarchy
-scriptversion=2005-06-29.22
+scriptversion=2006-05-11.19
# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
# Created: 1993-05-16
# bugs to <bug-automake@gnu.org> or send patches to
# <automake-patches@gnu.org>.
+nl='
+'
+IFS=" "" $nl"
errstatus=0
dirmode=
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2006-05-07.15}
+\def\texinfoversion{2006-05-28.17}
%
% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free
\def\minus{$-$}
% @dots{} outputs an ellipsis using the current font.
-% We do .5em per period so that it has the same spacing in a typewriter
-% font as three actual period characters.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em. So do
+% whichever is larger.
%
\def\dots{%
\leavevmode
- \hbox to 1.5em{%
- \hskip 0pt plus 0.25fil
- .\hfil.\hfil.%
- \hskip 0pt plus 0.5fil
+ \setbox0=\hbox{...}% get width of three periods
+ \ifdim\wd0 > 1.5em
+ \dimen0 = \wd0
+ \else
+ \dimen0 = 1.5em
+ \fi
+ \hbox to \dimen0{%
+ \hskip 0pt plus.25fil
+ .\hskip 0pt plus1fil
+ .\hskip 0pt plus1fil
+ .\hskip 0pt plus.5fil
}%
}
\escapechar = `\\ % use backslash in output files.
\def\@{@}% change to @@ when we switch to @ as escape char in index files.
\def\ {\realbackslash\space }%
+ %
% Need these in case \tex is in effect and \{ is a \delimiter again.
% But can't use \lbracecmd and \rbracecmd because texindex assumes
% braces and backslashes are used only as delimiters.
\let\{ = \mylbrace
\let\} = \myrbrace
%
+ % I don't entirely understand this, but when an index entry is
+ % generated from a macro call, the \endinput which \scanmacro inserts
+ % causes processing to be prematurely terminated. This is,
+ % apparently, because \indexsorttmp is fully expanded, and \endinput
+ % is an expandable command. The redefinition below makes \endinput
+ % disappear altogether for that purpose -- although logging shows that
+ % processing continues to some further point. On the other hand, it
+ % seems \endinput does not hurt in the printed index arg, since that
+ % is still getting written without apparent harm.
+ %
+ % Sample source (mac-idx3.tex, reported by Graham Percival to
+ % help-texinfo, 22may06):
+ % @macro funindex {WORD}
+ % @findex xyz
+ % @end macro
+ % ...
+ % @funindex commtest
+ %
+ % The above is not enough to reproduce the bug, but it gives the flavor.
+ %
+ % Sample whatsit resulting:
+ % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+ %
+ % So:
+ \let\endinput = \empty
+ %
% Do the redefinitions.
\commondummies
}
\spaceisspace
%
% Append \endinput to make sure that TeX does not see the ending newline.
- %
% I've verified that it is necessary both for e-TeX and for ordinary TeX
% --kasal, 29nov03
\scantokens{#1\endinput}%
projects / platform / upstream / coreutils.git / commitdiff