thermal/drivers/tsens: limit num_sensors to 9 for msm8939

On msm8939 last (hwid=10) sensor was added in the hw revision 3.0.
Calibration data for it was placed outside of the main calibration data
blob, so it is not accessible by the current blob-parsing code.

Moreover data for the sensor's p2 is not contiguous in the fuses. This
makes it hard to use nvmem_cell API to parse calibration data in a
generic way.

Since the sensor doesn't seem to be actually used by the existing
hardware, disable the sensor for now.

Fixes: 332bc8ebab2c ("thermal: qcom: tsens-v0_1: Add support for MSM8939")
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230101194034.831222-9-dmitry.baryshkov@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 6645c98..579028e 100644 (file)
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -285,7 +285,7 @@ static int calibrate_8939(struct tsens_priv *priv)
        u32 p1[10], p2[10];
        int mode = 0;
        u32 *qfprom_cdata;
-       u32 cdata[6];
+       u32 cdata[4];
 
        qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
        if (IS_ERR(qfprom_cdata))
@@ -296,8 +296,6 @@ static int calibrate_8939(struct tsens_priv *priv)
        cdata[1] = qfprom_cdata[13];
        cdata[2] = qfprom_cdata[0];
        cdata[3] = qfprom_cdata[1];
-       cdata[4] = qfprom_cdata[22];
-       cdata[5] = qfprom_cdata[21];
 
        mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT;
        dev_dbg(priv->dev, "calibration mode is %d\n", mode);
@@ -314,8 +312,6 @@ static int calibrate_8939(struct tsens_priv *priv)
                p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT;
                p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT;
                p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT;
-               p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4;
-               p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5;
                for (i = 0; i < priv->num_sensors; i++)
                        p2[i] = (base1 + p2[i]) << 2;
                fallthrough;
@@ -331,7 +327,6 @@ static int calibrate_8939(struct tsens_priv *priv)
                p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT;
                p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT;
                p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT;
-               p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT;
                for (i = 0; i < priv->num_sensors; i++)
                        p1[i] = ((base0) + p1[i]) << 2;
                break;
@@ -544,7 +539,7 @@ static int __init init_8939(struct tsens_priv *priv) {
        priv->sensor[6].slope = 2833;
        priv->sensor[7].slope = 2838;
        priv->sensor[8].slope = 2840;
-       priv->sensor[9].slope = 2852;
+       /* priv->sensor[9].slope = 2852; */
 
        return init_common(priv);
 }
@@ -620,9 +615,9 @@ static const struct tsens_ops ops_8939 = {
 };
 
 struct tsens_plat_data data_8939 = {
-       .num_sensors    = 10,
+       .num_sensors    = 9,
        .ops            = &ops_8939,
-       .hw_ids         = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, 10 },
+       .hw_ids         = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, /* 10 */ },
 
        .feat           = &tsens_v0_1_feat,
        .fields = tsens_v0_1_regfields,