mmc: tmio: sdhi: Add DMA transfer address alignment check at writing

In R-Car Gen 3, there is a DMA controller restriction of SDHI.
When the transfer exceeding the 4 kByte boundary is performed while
the DRAM address is not 128 byte aligned, the bus is occupied.
This patch avoids this.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>

diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c
index faf1819..1dc13db 100644 (file)
--- a/drivers/mmc/tmio-common.c
+++ b/drivers/mmc/tmio-common.c
@@ -358,14 +358,16 @@ static int tmio_sd_dma_xfer(struct udevice *dev, struct mmc_data *data)
 }
 
 /* check if the address is DMA'able */
-static bool tmio_sd_addr_is_dmaable(const char *src)
+static bool tmio_sd_addr_is_dmaable(struct mmc_data *data)
 {
-       uintptr_t addr = (uintptr_t)src;
+       uintptr_t addr = (uintptr_t)data->src;
 
        if (!IS_ALIGNED(addr, TMIO_SD_DMA_MINALIGN))
                return false;
 
 #if defined(CONFIG_RCAR_GEN3)
+       if (!(data->flags & MMC_DATA_READ) && !IS_ALIGNED(addr, 128))
+               return false;
        /* Gen3 DMA has 32bit limit */
        if (addr >> 32)
                return false;
@@ -480,7 +482,7 @@ int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
        if (data) {
                /* use DMA if the HW supports it and the buffer is aligned */
                if (priv->caps & TMIO_SD_CAP_DMA_INTERNAL &&
-                   tmio_sd_addr_is_dmaable(data->src))
+                   tmio_sd_addr_is_dmaable(data))
                        ret = tmio_sd_dma_xfer(dev, data);
                else
                        ret = tmio_sd_pio_xfer(dev, cmd, data);