ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code
authorPeter Ujfalusi <peter.ujfalusi@ti.com>
Thu, 16 Aug 2012 13:41:04 +0000 (16:41 +0300)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 22 Aug 2012 19:17:05 +0000 (20:17 +0100)
Remove the feature to configure the CLKR/FSR mux on McBSP port with 6pin
configuration.
When moving to devicetree these callback can no longer be used in a clean
way anymore.
If a board require to change the 6pin port to work in 4pin setup it needs
to set up the mux in the board file.
For OMAP2/3:
u32 devconf0;

/* McBSP1 CLKR/FSR signal to be connected to CLKX/FSX pin */
devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
devconf0 |=  OMAP2_MCBSP1_CLKR_MASK | OMAP2_MCBSP1_FSR_MASK;
omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0);

For OMAP4:
u32 mcbsp_pad;

/* McBSP4 CLKR/FSR signal to be connected to CLKX/FSX pin */
mcbsp_pad = omap4_ctrl_pad_readl(OMAP2_CONTROL_DEVCONF0);
mcbsp_pad |=  ((1 << 31) | (1 << 30));
omap4_ctrl_pad_writel(mcbsp_pad, OMAP2_CONTROL_DEVCONF0);

In case when the kernel is booted with DT blob the pinctrl-single will be
provided as soon as it is enabled on the platform.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
arch/arm/mach-omap2/mcbsp.c
arch/arm/plat-omap/include/plat/mcbsp.h
sound/soc/omap/mcbsp.h
sound/soc/omap/omap-mcbsp.c
sound/soc/omap/omap-mcbsp.h

index 6e046e1..660e00b 100644 (file)
@@ -25,8 +25,6 @@
 #include <plat/omap_device.h>
 #include <linux/pm_runtime.h>
 
-#include "control.h"
-
 /*
  * FIXME: Find a mechanism to enable/disable runtime the McBSP ICLK autoidle.
  * Sidetone needs non-gated ICLK and sidetone autoidle is broken.
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 
-/* McBSP1 internal signal muxing function for OMAP2/3 */
-static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal,
-                                  const char *src)
-{
-       u32 v;
-
-       v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-
-       if (!strcmp(signal, "clkr")) {
-               if (!strcmp(src, "clkr"))
-                       v &= ~OMAP2_MCBSP1_CLKR_MASK;
-               else if (!strcmp(src, "clkx"))
-                       v |= OMAP2_MCBSP1_CLKR_MASK;
-               else
-                       return -EINVAL;
-       } else if (!strcmp(signal, "fsr")) {
-               if (!strcmp(src, "fsr"))
-                       v &= ~OMAP2_MCBSP1_FSR_MASK;
-               else if (!strcmp(src, "fsx"))
-                       v |= OMAP2_MCBSP1_FSR_MASK;
-               else
-                       return -EINVAL;
-       } else {
-               return -EINVAL;
-       }
-
-       omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-
-       return 0;
-}
-
-/* McBSP4 internal signal muxing function for OMAP4 */
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX    (1 << 31)
-#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX   (1 << 30)
-static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal,
-                                  const char *src)
-{
-       u32 v;
-
-       /*
-        * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR
-        * mux) is used */
-       v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
-       if (!strcmp(signal, "clkr")) {
-               if (!strcmp(src, "clkr"))
-                       v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
-               else if (!strcmp(src, "clkx"))
-                       v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX;
-               else
-                       return -EINVAL;
-       } else if (!strcmp(signal, "fsr")) {
-               if (!strcmp(src, "fsr"))
-                       v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
-               else if (!strcmp(src, "fsx"))
-                       v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX;
-               else
-                       return -EINVAL;
-       } else {
-               return -EINVAL;
-       }
-
-       omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP);
-
-       return 0;
-}
-
 static int omap3_enable_st_clock(unsigned int id, bool enable)
 {
        unsigned int w;
@@ -143,14 +74,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
                pdata->has_ccr = true;
        }
 
-       /* On OMAP2/3 the McBSP1 port has 6 pin configuration */
-       if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4)
-               pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
-
-       /* On OMAP4 the McBSP4 port has 6 pin configuration */
-       if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4)
-               pdata->mux_signal = omap4_mcbsp4_mux_rx_clk;
-
        if (oh->class->rev == MCBSP_CONFIG_TYPE2) {
                /* The FIFO has 128 locations */
                pdata->buffer_size = 0x80;
index 0a7d5ca..c78d90b 100644 (file)
@@ -47,7 +47,6 @@ struct omap_mcbsp_platform_data {
        bool has_wakeup; /* Wakeup capability */
        bool has_ccr; /* Transceiver has configuration control registers */
        int (*enable_st_clock)(unsigned int, bool);
-       int (*mux_signal)(struct device *dev, const char *signal, const char *src);
 };
 
 /**
index 262a615..49a6725 100644 (file)
@@ -334,9 +334,6 @@ void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx);
 /* McBSP functional clock source changing function */
 int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id);
 
-/* McBSP signal muxing API */
-int omap_mcbsp_6pin_src_mux(struct omap_mcbsp *mcbsp, u8 mux);
-
 /* Sidetone specific API */
 int omap_st_set_chgain(struct omap_mcbsp *mcbsp, int channel, s16 chgain);
 int omap_st_get_chgain(struct omap_mcbsp *mcbsp, int channel, s16 *chgain);
index 1046083..5061594 100644 (file)
@@ -516,21 +516,9 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
                        return -EBUSY;
        }
 
-       if (clk_id == OMAP_MCBSP_SYSCLK_CLK ||
-           clk_id == OMAP_MCBSP_SYSCLK_CLKS_FCLK ||
-           clk_id == OMAP_MCBSP_SYSCLK_CLKS_EXT ||
-           clk_id == OMAP_MCBSP_SYSCLK_CLKX_EXT ||
-           clk_id == OMAP_MCBSP_SYSCLK_CLKR_EXT) {
-               mcbsp->in_freq = freq;
-               regs->srgr2     &= ~CLKSM;
-               regs->pcr0      &= ~SCLKME;
-       } else if (cpu_class_is_omap1()) {
-               /*
-                * McBSP CLKR/FSR signal muxing functions are only available on
-                * OMAP2 or newer versions
-                */
-               return -EINVAL;
-       }
+       mcbsp->in_freq = freq;
+       regs->srgr2 &= ~CLKSM;
+       regs->pcr0 &= ~SCLKME;
 
        switch (clk_id) {
        case OMAP_MCBSP_SYSCLK_CLK:
@@ -558,20 +546,6 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
        case OMAP_MCBSP_SYSCLK_CLKR_EXT:
                regs->pcr0      |= SCLKME;
                break;
-
-
-       case OMAP_MCBSP_CLKR_SRC_CLKR:
-               err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKR);
-               break;
-       case OMAP_MCBSP_CLKR_SRC_CLKX:
-               err = omap_mcbsp_6pin_src_mux(mcbsp, CLKR_SRC_CLKX);
-               break;
-       case OMAP_MCBSP_FSR_SRC_FSR:
-               err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSR);
-               break;
-       case OMAP_MCBSP_FSR_SRC_FSX:
-               err = omap_mcbsp_6pin_src_mux(mcbsp, FSR_SRC_FSX);
-               break;
        default:
                err = -ENODEV;
        }
index f877b16..baebcee 100644 (file)
@@ -32,10 +32,6 @@ enum omap_mcbsp_clksrg_clk {
        OMAP_MCBSP_SYSCLK_CLK,          /* Internal ICLK */
        OMAP_MCBSP_SYSCLK_CLKX_EXT,     /* External CLKX pin */
        OMAP_MCBSP_SYSCLK_CLKR_EXT,     /* External CLKR pin */
-       OMAP_MCBSP_CLKR_SRC_CLKR,       /* CLKR from CLKR pin */
-       OMAP_MCBSP_CLKR_SRC_CLKX,       /* CLKR from CLKX pin */
-       OMAP_MCBSP_FSR_SRC_FSR,         /* FSR from FSR pin */
-       OMAP_MCBSP_FSR_SRC_FSX,         /* FSR from FSX pin */
 };
 
 /* McBSP dividers */