arm: dts: sunxi: h3: Update DT files

Update the H3 DT files from the Linux 5.12 release.

The changes update some boards, and don't affect U-Boot, but fix Gigabit
Ethernet when this DT is passed on to the Linux kernel.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

diff --git a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d277d04..f3f7a2c 100644 (file)
--- a/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -31,7 +31,7 @@
 
                pwr_led {
                        label = "bananapi-m2-zero:red:pwr";
-                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
                        default-state = "on";
                };
        };
@@ -62,6 +62,35 @@
                states = <1100000 0>, <1300000 1>;
        };
 
+       reg_vcc_dram: vcc-dram {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc-dram";
+               regulator-min-microvolt = <1500000>;
+               regulator-max-microvolt = <1500000>;
+               regulator-always-on;
+               regulator-boot-on;
+               enable-active-high;
+               gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
+               vin-supply = <&reg_vcc5v0>;
+       };
+
+       reg_vcc1v2: vcc1v2 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc1v2";
+               regulator-min-microvolt = <1200000>;
+               regulator-max-microvolt = <1200000>;
+               regulator-always-on;
+               regulator-boot-on;
+               enable-active-high;
+               gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+               vin-supply = <&reg_vcc5v0>;
+       };
+
+       poweroff {
+               compatible = "regulator-poweroff";
+               cpu-supply = <&reg_vcc1v2>;
+       };
+
        wifi_pwrseq: wifi_pwrseq {
                compatible = "mmc-pwrseq-simple";
                reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
@@ -125,6 +154,7 @@
 
        bluetooth {
                compatible = "brcm,bcm43438-bt";
+               max-speed = <1500000>;
                clocks = <&rtc 1>;
                clock-names = "lpo";
                vbat-supply = <&reg_vcc3v3>;
@@ -136,6 +166,70 @@
 
 };
 
+&pio {
+       gpio-line-names =
+               /* PA */
+               "CON2-P13", "CON2-P11", "CON2-P22", "CON2-P15",
+                       "CON3-P03", "CON3-P02", "CON2-P07", "CON2-P29",
+               "CON2-P31", "CON2-P33", "CON2-P35", "CON2-P05",
+                       "CON2-P03", "CON2-P08", "CON2-P10", "CON2-P16",
+               "CON2-P12", "CON2-P37", "CON2-P28", "CON2-P27",
+                       "CON2-P40", "CON2-P38", "", "",
+               "", "", "", "", "", "", "", "",
+
+               /* PB */
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+
+               /* PC */
+               "CON2-P19", "CON2-P21", "CON2-P23", "CON2-P24",
+                       "CON2-P18", "", "", "CON2-P26",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+
+               /* PD */
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "CSI-PWR-EN", "",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+
+               /* PE */
+               "CN3-P17", "CN3-P13", "CN3-P09", "CN3-P07",
+                       "CN3-P19", "CN3-P21", "CN3-P22", "CN3-P20",
+               "CN3-P18", "CN3-P16", "CN3-P14", "CN3-P12",
+                       "CN3-P05", "CN3-P03", "CN3-P06", "CN3-P08",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+
+               /* PF */
+               "SDC0-D1", "SDC0-D0", "SDC0-CLK", "SDC0-CMD", "SDC0-D3",
+                       "SDC0-D2", "SDC0-DET", "",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+
+               /* PG */
+               "WL-SDIO-CLK", "WL-SDIO-CMD", "WL-SDIO-D0", "WL-SDIO-D1",
+                       "WL-SDIO-D2", "WL-SDIO-D3", "BT-UART-TX", "BT-UART-RX",
+               "BT-UART-RTS", "BT-UART-CTS", "WL-WAKE-AP", "BT-WAKE-AP",
+                       "BT-RST-N", "AP-WAKE-BT", "", "",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "";
+};
+
+&r_pio {
+       gpio-line-names =
+               /* PL */
+               "", "CPUX-SET", "CON2-P32", "POWER-KEY", "CON2-P36",
+                       "VCC-IO-EN", "USB0-ID", "WL-PWR-EN",
+               "PWR-STB", "PWR-DRAM", "PWR-LED", "IR-RX", "", "", "", "",
+               "", "", "", "", "", "", "", "",
+               "", "", "", "", "", "", "", "";
+};
+
 &usb_otg {
        dr_mode = "otg";
        status = "okay";

diff --git a/arch/arm/dts/sun8i-h3-beelink-x2.dts b/arch/arm/dts/sun8i-h3-beelink-x2.dts
index 45a2444..62b5280 100644 (file)
--- a/arch/arm/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/dts/sun8i-h3-beelink-x2.dts
@@ -75,13 +75,13 @@
        leds {
                compatible = "gpio-leds";
 
-               blue {
+               led-0 {
                        label = "beelink-x2:blue:pwr";
                        gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
                        default-state = "on";
                };
 
-               red {
+               led-1 {
                        label = "beelink-x2:red:standby";
                        gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
                };

diff --git a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
index 6b14927..8e7dfcf 100644 (file)
--- a/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-duo2.dts
@@ -25,13 +25,13 @@
        leds {
                compatible = "gpio-leds";
 
-               pwr {
+               led-0 {
                        label = "nanopi:red:pwr";
                        gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
                        default-state = "on";
                };
 
-               status {
+               led-1 {
                        label = "nanopi:green:status";
                        gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
                };

diff --git a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
index 07867a0..be49eab 100644 (file)
--- a/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/dts/sun8i-h3-nanopi-neo-air.dts
@@ -61,13 +61,13 @@
        leds {
                compatible = "gpio-leds";
 
-               pwr {
+               led-0 {
                        label = "nanopi:green:pwr";
                        gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
                        default-state = "on";
                };
 
-               status {
+               led-1 {
                        label = "nanopi:blue:status";
                        gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
                };

diff --git a/arch/arm/dts/sun8i-h3-nanopi.dtsi b/arch/arm/dts/sun8i-h3-nanopi.dtsi
index 4df29a6..c7c3e7d 100644 (file)
--- a/arch/arm/dts/sun8i-h3-nanopi.dtsi
+++ b/arch/arm/dts/sun8i-h3-nanopi.dtsi
@@ -60,13 +60,13 @@
        leds {
                compatible = "gpio-leds";
 
-               status {
+               led-0 {
                        label = "nanopi:blue:status";
                        gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "heartbeat";
                };
 
-               pwr {
+               led-1 {
                        label = "nanopi:green:pwr";
                        gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
                        default-state = "on";

diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
index 71fb732..babf4cf 100644 (file)
--- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts
@@ -53,11 +53,6 @@
        };
 };
 
-&emac {
-       /* LEDs changed to active high on the plus */
-       /delete-property/ allwinner,leds-active-low;
-};
-
 &mmc1 {
        vmmc-supply = <&reg_vcc3v3>;
        bus-width = <4>;

diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
index 6dbf7b2..b6ca45d 100644 (file)
--- a/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-plus2e.dts
@@ -67,7 +67,7 @@
        pinctrl-0 = <&emac_rgmii_pins>;
        phy-supply = <&reg_gmac_3v3>;
        phy-handle = <&ext_rgmii_phy>;
-       phy-mode = "rgmii";
+       phy-mode = "rgmii-id";
        status = "okay";
 };
 

diff --git a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
index b8f46e2..561ea1d 100644 (file)
--- a/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -70,6 +70,21 @@
                };
        };
 
+       leds {
+               compatible = "gpio-leds";
+
+               led-0 {
+                       label = "orangepi:green:pwr";
+                       gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
+               };
+
+               led-1 {
+                       label = "orangepi:red:status";
+                       gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+               };
+       };
+
        reg_vcc3v3: vcc3v3 {
                compatible = "regulator-fixed";
                regulator-name = "vcc3v3";
@@ -88,6 +103,10 @@
        status = "okay";
 };
 
+&ehci0 {
+       status = "okay";
+};
+
 &hdmi {
        status = "okay";
 };
@@ -132,8 +151,27 @@
        status = "okay";
 };
 
+&ohci0 {
+       status = "okay";
+};
+
 &uart0 {
        pinctrl-names = "default";
        pinctrl-0 = <&uart0_pa_pins>;
        status = "okay";
 };
+
+&usb_otg {
+       /*
+        * According to schematics CN1 MicroUSB port can be used to take
+        * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+        * port cannot provide power externally even if the board is powered
+        * via GPIO pins. It thus makes sense to force peripheral mode.
+        */
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
+&usbphy {
+       status = "okay";
+};