source "drivers/net/arm/Kconfig"
-config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on PPC_PMAC && PPC32
- select CRC32
- help
- Power Macintoshes and clones with Ethernet built-in on the
- motherboard will usually use a MACE (Medium Access Control for
- Ethernet) interface. Say Y to include support for the MACE chip.
-
- To compile this driver as a module, choose M here: the module
- will be called mace.
-
-config MACE_AAUI_PORT
- bool "Use AAUI port instead of TP by default"
- depends on MACE
- help
- Some Apple machines (notably the Apple Network Server) which use the
- MACE ethernet chip have an Apple AUI port (small 15-pin connector),
- instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
- Y here if you have such a machine. If unsure, say N.
- The driver will default to AAUI on ANS anyway, and if you use it as
- a module, you can provide the port_aaui=0|1 to force the driver.
-
-config BMAC
- tristate "BMAC (G3 ethernet) support"
- depends on PPC_PMAC && PPC32
- select CRC32
- help
- Say Y for support of BMAC Ethernet interfaces. These are used on G3
- computers.
-
- To compile this driver as a module, choose M here: the module
- will be called bmac.
-
-config MAC89x0
- tristate "Macintosh CS89x0 based ethernet cards"
- depends on MAC
- ---help---
- Support for CS89x0 chipset based Ethernet cards. If you have a
- Nubus or LC-PDS network (Ethernet) card of this type, say Y and
- read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. This module will
- be called mac89x0.
-
config MACSONIC
tristate "Macintosh SONIC based ethernet (onboard, NuBus, LC, CS)"
depends on MAC
To compile this driver as a module, choose M here. This module will
be called macsonic.
-config MACMACE
- bool "Macintosh (AV) onboard MACE ethernet"
- depends on MAC
- select CRC32
- help
- Support for the onboard AMD 79C940 MACE Ethernet controller used in
- the 660AV and 840AV Macintosh. If you have one of these Macintoshes
- say Y and read the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
config KORINA
tristate "Korina (IDT RC32434) Ethernet support"
depends on NET_ETHERNET && MIKROTIK_RB532
To compile this driver as a module, choose M here. The module
will be called forcedeth.
-config CS89x0
- tristate "CS89x0 support"
- depends on NET_ETHERNET && (ISA || EISA || MACH_IXDP2351 \
- || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
- ---help---
- Support for CS89x0 chipset based Ethernet cards. If you have a
- network (Ethernet) card of this type, say Y and read the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto> as well as
- <file:Documentation/networking/cs89x0.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called cs89x0.
-
-config CS89x0_NONISA_IRQ
- def_bool y
- depends on CS89x0 != n
- depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
-
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
depends on NET_PCI && PCI && MIPS
obj-$(CONFIG_ROADRUNNER) += rrunner.o
-obj-$(CONFIG_MACE) += mace.o
-obj-$(CONFIG_BMAC) += bmac.o
-
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_SIS190) += sis190.o
obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o
-obj-$(CONFIG_CS89x0) += cs89x0.o
obj-$(CONFIG_MACSONIC) += macsonic.o
-obj-$(CONFIG_MACMACE) += macmace.o
-obj-$(CONFIG_MAC89x0) += mac89x0.o
obj-$(CONFIG_TUN) += tun.o
obj-$(CONFIG_VETH) += veth.o
obj-$(CONFIG_NET_NETX) += netx-eth.o
source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig"
+source "drivers/net/ethernet/apple/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
+obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
--- /dev/null
+#
+# Apple device configuration
+#
+
+config NET_VENDOR_APPLE
+ bool "Apple devices"
+ depends on (PPC_PMAC && PPC32) || MAC || ISA || EISA || MACH_IXDP2351 \
+ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about IBM devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_APPLE
+
+config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on PPC_PMAC && PPC32
+ select CRC32
+ ---help---
+ Power Macintoshes and clones with Ethernet built-in on the
+ motherboard will usually use a MACE (Medium Access Control for
+ Ethernet) interface. Say Y to include support for the MACE chip.
+
+ To compile this driver as a module, choose M here: the module
+ will be called mace.
+
+config MACE_AAUI_PORT
+ bool "Use AAUI port instead of TP by default"
+ depends on MACE
+ ---help---
+ Some Apple machines (notably the Apple Network Server) which use the
+ MACE ethernet chip have an Apple AUI port (small 15-pin connector),
+ instead of an 8-pin RJ45 connector for twisted-pair ethernet. Say
+ Y here if you have such a machine. If unsure, say N.
+ The driver will default to AAUI on ANS anyway, and if you use it as
+ a module, you can provide the port_aaui=0|1 to force the driver.
+
+config BMAC
+ tristate "BMAC (G3 ethernet) support"
+ depends on PPC_PMAC && PPC32
+ select CRC32
+ ---help---
+ Say Y for support of BMAC Ethernet interfaces. These are used on G3
+ computers.
+
+ To compile this driver as a module, choose M here: the module
+ will be called bmac.
+
+config MAC89x0
+ tristate "Macintosh CS89x0 based ethernet cards"
+ depends on MAC
+ ---help---
+ Support for CS89x0 chipset based Ethernet cards. If you have a
+ Nubus or LC-PDS network (Ethernet) card of this type, say Y and
+ read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. This module will
+ be called mac89x0.
+
+config MACMACE
+ bool "Macintosh (AV) onboard MACE ethernet"
+ depends on MAC
+ select CRC32
+ ---help---
+ Support for the onboard AMD 79C940 MACE Ethernet controller used in
+ the 660AV and 840AV Macintosh. If you have one of these Macintoshes
+ say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config CS89x0
+ tristate "CS89x0 support"
+ depends on (ISA || EISA || MACH_IXDP2351 \
+ || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440)
+ ---help---
+ Support for CS89x0 chipset based Ethernet cards. If you have a
+ network (Ethernet) card of this type, say Y and read the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto> as well as
+ <file:Documentation/networking/cs89x0.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called cs89x0.
+
+config CS89x0_NONISA_IRQ
+ def_bool y
+ depends on CS89x0 != n
+ depends on MACH_IXDP2351 || ARCH_IXDP2X01 || MACH_MX31ADS || MACH_QQ2440
+
+endif # NET_VENDOR_APPLE
--- /dev/null
+#
+# Makefile for the Apple network device drivers.
+#
+
+obj-$(CONFIG_MACE) += mace.o
+obj-$(CONFIG_BMAC) += bmac.o
+obj-$(CONFIG_MAC89x0) += mac89x0.o
+obj-$(CONFIG_CS89x0) += cs89x0.o
+obj-$(CONFIG_MACMACE) += macmace.o
projects / platform / kernel / linux-exynos.git / commitdiff