resume_ptid = RESUME_ALL; /* Default */
- if ((step || singlestep_breakpoints_inserted_p) &&
- (stepping_past_singlestep_breakpoint
- || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
+ if ((step || singlestep_breakpoints_inserted_p)
+ && (stepping_past_singlestep_breakpoint
+ || (!breakpoints_inserted && breakpoint_here_p (read_pc ()))))
{
/* Stepping past a breakpoint without inserting breakpoints.
Make sure only the current thread gets to step, so that
resume_ptid = inferior_ptid;
}
- if ((scheduler_mode == schedlock_on) ||
- (scheduler_mode == schedlock_step &&
- (step || singlestep_breakpoints_inserted_p)))
+ if ((scheduler_mode == schedlock_on)
+ || (scheduler_mode == schedlock_step
+ && (step || singlestep_breakpoints_inserted_p)))
{
/* User-settable 'scheduler' mode requires solo thread resume. */
resume_ptid = inferior_ptid;
/* Make sure we were stopped either at a breakpoint, or because
of a Ctrl-C. */
if (wait_status.kind != TARGET_WAITKIND_STOPPED
- || (wait_status.value.sig != TARGET_SIGNAL_TRAP &&
- wait_status.value.sig != TARGET_SIGNAL_INT))
+ || (wait_status.value.sig != TARGET_SIGNAL_TRAP
+ && wait_status.value.sig != TARGET_SIGNAL_INT))
{
return 0;
}
select_frame (get_current_frame ());
}
- /* We return 1 to indicate that there is a breakpoint here,
- so we need to step over it before continuing to avoid
- hitting it straight away. */
- if (breakpoint_here_p (wait_pc))
- return 1;
+ /* We return 1 to indicate that there is a breakpoint here,
+ so we need to step over it before continuing to avoid
+ hitting it straight away. */
+ if (breakpoint_here_p (wait_pc))
+ return 1;
}
return 0;
-
+
}
/* Record the pc of the program the last time it stopped. This is
{
insert_breakpoints ();
/* If we get here there was no call to error() in
- insert breakpoints -- so they were inserted. */
+ insert breakpoints -- so they were inserted. */
breakpoints_inserted = 1;
}
cannot be read unless the inferior is stopped. At that point, we
are not guaranteed the inferior is stopped and so the read_pc ()
call can fail. Setting the prev_pc value here ensures the value is
- updated correctly when the inferior is stopped. */
+ updated correctly when the inferior is stopped. */
prev_pc = read_pc ();
/* Resume inferior. */
static void step_into_function (struct execution_control_state *ecs);
static void insert_step_resume_breakpoint (struct frame_info *step_frame,
- struct execution_control_state *ecs);
+ struct execution_control_state
+ *ecs);
static void stop_stepping (struct execution_control_state *ecs);
static void prepare_to_wait (struct execution_control_state *ecs);
static void keep_going (struct execution_control_state *ecs);
affected by DECR_PC_AFTER_BREAK. Other waitkinds which are implemented
by software breakpoints should be handled through the normal breakpoint
layer.
-
+
NOTE drow/2004-01-31: On some targets, breakpoints may generate
different signals (SIGILL or SIGEMT for instance), but it is less
clear where the PC is pointing afterwards. It may not match
DECR_PC_AFTER_BREAK. I don't know any specific target that generates
these signals at breakpoints (the code has been in GDB since at least
1992) so I can not guess how to handle them here.
-
+
In earlier versions of GDB, a target with HAVE_NONSTEPPABLE_WATCHPOINTS
would have the PC after hitting a watchpoint affected by
DECR_PC_AFTER_BREAK. I haven't found any target with both of these set
if (SOFTWARE_SINGLE_STEP_P ())
{
/* When using software single-step, a SIGTRAP can only indicate
- an inserted breakpoint. This actually makes things
- easier. */
+ an inserted breakpoint. This actually makes things
+ easier. */
if (singlestep_breakpoints_inserted_p)
/* When software single stepping, the instruction at [prev_pc]
is never a breakpoint, but the instruction following
else
{
/* When using hardware single-step, a SIGTRAP is reported for
- both a completed single-step and a software breakpoint. Need
- to differentiate between the two as the latter needs
- adjusting but the former does not. */
+ both a completed single-step and a software breakpoint. Need
+ to differentiate between the two as the latter needs
+ adjusting but the former does not. */
if (currently_stepping (ecs))
{
if (prev_pc == breakpoint_pc
defined in the file "config/pa/nm-hppah.h", accesses the variable
indirectly. Mutter something rude about the HP merge. */
int sw_single_step_trap_p = 0;
- int stopped_by_watchpoint = -1; /* Mark as unknown. */
+ int stopped_by_watchpoint = -1; /* Mark as unknown. */
/* Cache the last pid/waitstatus. */
target_last_wait_ptid = ecs->ptid;
ui_out_text (uiout, "[New ");
ui_out_text (uiout, target_pid_or_tid_to_str (ecs->ptid));
ui_out_text (uiout, "]\n");
-
-#if 0
- /* NOTE: This block is ONLY meant to be invoked in case of a
- "thread creation event"! If it is invoked for any other
- sort of event (such as a new thread landing on a breakpoint),
- the event will be discarded, which is almost certainly
- a bad thing!
-
- To avoid this, the low-level module (eg. target_wait)
- should call in_thread_list and add_thread, so that the
- new thread is known by the time we get here. */
-
- /* We may want to consider not doing a resume here in order
- to give the user a chance to play with the new thread.
- It might be good to make that a user-settable option. */
-
- /* At this point, all threads are stopped (happens
- automatically in either the OS or the native code).
- Therefore we need to continue all threads in order to
- make progress. */
-
- target_resume (RESUME_ALL, 0, TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
-#endif
}
switch (ecs->ws.kind)
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
- stack's section table is kept up-to-date. Architectures,
- (e.g., PPC64), use the section table to perform
- operations such as address => section name and hence
- require the table to contain all sections (including
- those found in shared libraries). */
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
stop_signal = TARGET_SIGNAL_TRAP;
/* NOTE drow/2002-12-05: This code should be pushed down into the
- target_wait function. Until then following vfork on HP/UX 10.20
- is probably broken by this. Of course, it's broken anyway. */
+ target_wait function. Until then following vfork on HP/UX 10.20
+ is probably broken by this. Of course, it's broken anyway. */
/* Is this a target which reports multiple exec events per actual
call to exec()? (HP-UX using ptrace does, for example.) If so,
ignore all but the last one. Just resume the exec'r, and wait
/* We had an event in the inferior, but we are not interested
in handling it at this level. The lower layers have already
done what needs to be done, if anything.
-
- One of the possible circumstances for this is when the
- inferior produces output for the console. The inferior has
- not stopped, and we are ignoring the event. Another possible
- circumstance is any event which the lower level knows will be
- reported multiple times without an intervening resume. */
+
+ One of the possible circumstances for this is when the
+ inferior produces output for the console. The inferior has
+ not stopped, and we are ignoring the event. Another possible
+ circumstance is any event which the lower level knows will be
+ reported multiple times without an intervening resume. */
case TARGET_WAITKIND_IGNORE:
prepare_to_wait (ecs);
return;
if (stepping_past_singlestep_breakpoint)
{
- gdb_assert (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p);
+ gdb_assert (SOFTWARE_SINGLE_STEP_P ()
+ && singlestep_breakpoints_inserted_p);
gdb_assert (ptid_equal (singlestep_ptid, ecs->ptid));
gdb_assert (!ptid_equal (singlestep_ptid, saved_singlestep_ptid));
stepping_past_singlestep_breakpoint = 0;
/* We've either finished single-stepping past the single-step
- breakpoint, or stopped for some other reason. It would be nice if
- we could tell, but we can't reliably. */
+ breakpoint, or stopped for some other reason. It would be nice if
+ we could tell, but we can't reliably. */
if (stop_signal == TARGET_SIGNAL_TRAP)
- {
+ {
/* Pull the single step breakpoints out of the target. */
SOFTWARE_SINGLE_STEP (0, 0);
singlestep_breakpoints_inserted_p = 0;
}
if (thread_hop_needed)
- {
- int remove_status;
+ {
+ int remove_status;
- /* Saw a breakpoint, but it was hit by the wrong thread.
- Just continue. */
+ /* Saw a breakpoint, but it was hit by the wrong thread.
+ Just continue. */
- if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- {
- /* Pull the single step breakpoints out of the target. */
- SOFTWARE_SINGLE_STEP (0, 0);
- singlestep_breakpoints_inserted_p = 0;
- }
+ if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
+ {
+ /* Pull the single step breakpoints out of the target. */
+ SOFTWARE_SINGLE_STEP (0, 0);
+ singlestep_breakpoints_inserted_p = 0;
+ }
- remove_status = remove_breakpoints ();
- /* Did we fail to remove breakpoints? If so, try
- to set the PC past the bp. (There's at least
- one situation in which we can fail to remove
- the bp's: On HP-UX's that use ttrace, we can't
- change the address space of a vforking child
- process until the child exits (well, okay, not
- then either :-) or execs. */
- if (remove_status != 0)
- {
- /* FIXME! This is obviously non-portable! */
- write_pc_pid (stop_pc + 4, ecs->ptid);
- /* We need to restart all the threads now,
- * unles we're running in scheduler-locked mode.
- * Use currently_stepping to determine whether to
- * step or continue.
- */
- /* FIXME MVS: is there any reason not to call resume()? */
- if (scheduler_mode == schedlock_on)
- target_resume (ecs->ptid,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- else
- target_resume (RESUME_ALL,
- currently_stepping (ecs), TARGET_SIGNAL_0);
- prepare_to_wait (ecs);
- return;
- }
+ remove_status = remove_breakpoints ();
+ /* Did we fail to remove breakpoints? If so, try
+ to set the PC past the bp. (There's at least
+ one situation in which we can fail to remove
+ the bp's: On HP-UX's that use ttrace, we can't
+ change the address space of a vforking child
+ process until the child exits (well, okay, not
+ then either :-) or execs. */
+ if (remove_status != 0)
+ {
+ /* FIXME! This is obviously non-portable! */
+ write_pc_pid (stop_pc + 4, ecs->ptid);
+ /* We need to restart all the threads now,
+ * unles we're running in scheduler-locked mode.
+ * Use currently_stepping to determine whether to
+ * step or continue.
+ */
+ /* FIXME MVS: is there any reason not to call resume()? */
+ if (scheduler_mode == schedlock_on)
+ target_resume (ecs->ptid,
+ currently_stepping (ecs), TARGET_SIGNAL_0);
else
- { /* Single step */
- breakpoints_inserted = 0;
- if (!ptid_equal (inferior_ptid, ecs->ptid))
- context_switch (ecs);
- ecs->waiton_ptid = ecs->ptid;
- ecs->wp = &(ecs->ws);
- ecs->another_trap = 1;
-
- ecs->infwait_state = infwait_thread_hop_state;
- keep_going (ecs);
- registers_changed ();
- return;
- }
+ target_resume (RESUME_ALL,
+ currently_stepping (ecs), TARGET_SIGNAL_0);
+ prepare_to_wait (ecs);
+ return;
+ }
+ else
+ { /* Single step */
+ breakpoints_inserted = 0;
+ if (!ptid_equal (inferior_ptid, ecs->ptid))
+ context_switch (ecs);
+ ecs->waiton_ptid = ecs->ptid;
+ ecs->wp = &(ecs->ws);
+ ecs->another_trap = 1;
+
+ ecs->infwait_state = infwait_thread_hop_state;
+ keep_going (ecs);
+ registers_changed ();
+ return;
+ }
}
else if (SOFTWARE_SINGLE_STEP_P () && singlestep_breakpoints_inserted_p)
- {
- sw_single_step_trap_p = 1;
- ecs->random_signal = 0;
- }
+ {
+ sw_single_step_trap_p = 1;
+ ecs->random_signal = 0;
+ }
}
else
ecs->random_signal = 1;
stack. */
if (stop_signal == TARGET_SIGNAL_TRAP
- || (breakpoints_inserted &&
- (stop_signal == TARGET_SIGNAL_ILL
- || stop_signal == TARGET_SIGNAL_SEGV
- || stop_signal == TARGET_SIGNAL_EMT))
- || stop_soon == STOP_QUIETLY
- || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
+ || (breakpoints_inserted
+ && (stop_signal == TARGET_SIGNAL_ILL
+ || stop_signal == TARGET_SIGNAL_SEGV
+ || stop_signal == TARGET_SIGNAL_EMT))
+ || stop_soon == STOP_QUIETLY || stop_soon == STOP_QUIETLY_NO_SIGSTOP)
{
if (stop_signal == TARGET_SIGNAL_TRAP && stop_after_trap)
{
else
{
/* See if there is a breakpoint at the current PC. */
- stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
+ stop_bpstat = bpstat_stop_status (stop_pc, ecs->ptid,
stopped_by_watchpoint);
/* Following in case break condition called a
}
/* NOTE: cagney/2003-03-29: These two checks for a random signal
- at one stage in the past included checks for an inferior
- function call's call dummy's return breakpoint. The original
- comment, that went with the test, read:
+ at one stage in the past included checks for an inferior
+ function call's call dummy's return breakpoint. The original
+ comment, that went with the test, read:
- ``End of a stack dummy. Some systems (e.g. Sony news) give
- another signal besides SIGTRAP, so check here as well as
- above.''
+ ``End of a stack dummy. Some systems (e.g. Sony news) give
+ another signal besides SIGTRAP, so check here as well as
+ above.''
If someone ever tries to get get call dummys on a
non-executable stack to work (where the target would stop
enabled when momentary breakpoints were not being used, I
suspect that it won't be the case.
- NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
- be necessary for call dummies on a non-executable stack on
- SPARC. */
+ NOTE: kettenis/2004-02-05: Indeed such checks don't seem to
+ be necessary for call dummies on a non-executable stack on
+ SPARC. */
if (stop_signal == TARGET_SIGNAL_TRAP)
ecs->random_signal
delete_step_resume_breakpoint (&step_resume_breakpoint);
}
-#if 0
- /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls > 0)
- set_longjmp_resume_breakpoint (jmp_buf_pc, get_current_frame ());
- else
-#endif /* 0 */
- set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
+ set_longjmp_resume_breakpoint (jmp_buf_pc, null_frame_id);
ecs->handling_longjmp = 1; /* FIXME */
keep_going (ecs);
return;
case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME_SINGLE:
remove_breakpoints ();
breakpoints_inserted = 0;
-#if 0
- /* FIXME - Need to implement nested temporary breakpoints */
- if (step_over_calls
- && (frame_id_inner (get_frame_id (get_current_frame ()),
- step_frame_id)))
- {
- ecs->another_trap = 1;
- keep_going (ecs);
- return;
- }
-#endif /* 0 */
disable_longjmp_breakpoint ();
ecs->handling_longjmp = 0; /* FIXME */
if (what.main_action == BPSTAT_WHAT_CLEAR_LONGJMP_RESUME)
breakpoint_re_set. */
target_terminal_ours_for_output ();
/* NOTE: cagney/2003-11-25: Make certain that the target
- stack's section table is kept up-to-date. Architectures,
- (e.g., PPC64), use the section table to perform
- operations such as address => section name and hence
- require the table to contain all sections (including
- those found in shared libraries). */
+ stack's section table is kept up-to-date. Architectures,
+ (e.g., PPC64), use the section table to perform
+ operations such as address => section name and hence
+ require the table to contain all sections (including
+ those found in shared libraries). */
/* NOTE: cagney/2003-11-25: Pass current_target and not
- exec_ops to SOLIB_ADD. This is because current GDB is
- only tooled to propagate section_table changes out from
- the "current_target" (see target_resize_to_sections), and
- not up from the exec stratum. This, of course, isn't
- right. "infrun.c" should only interact with the
- exec/process stratum, instead relying on the target stack
- to propagate relevant changes (stop, section table
- changed, ...) up to other layers. */
+ exec_ops to SOLIB_ADD. This is because current GDB is
+ only tooled to propagate section_table changes out from
+ the "current_target" (see target_resize_to_sections), and
+ not up from the exec stratum. This, of course, isn't
+ right. "infrun.c" should only interact with the
+ exec/process stratum, instead relying on the target stack
+ to propagate relevant changes (stop, section table
+ changed, ...) up to other layers. */
SOLIB_ADD (NULL, 0, ¤t_target, auto_solib_add);
target_terminal_inferior ();
the call that caused this catchpoint to trigger. That
gives the user a more useful vantage from which to
examine their program's state. */
- else if (what.main_action ==
- BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
+ else if (what.main_action
+ == BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK)
{
/* ??rehrauer: If I could figure out how to get the
right return PC from here, we could just set a temp
&& get_frame_type (get_current_frame ()) == SIGTRAMP_FRAME)
{
/* The inferior, while doing a "step" or "next", has ended up in
- a signal trampoline (either by a signal being delivered or by
- the signal handler returning). Just single-step until the
- inferior leaves the trampoline (either by calling the handler
- or returning). */
+ a signal trampoline (either by a signal being delivered or by
+ the signal handler returning). Just single-step until the
+ inferior leaves the trampoline (either by calling the handler
+ or returning). */
keep_going (ecs);
return;
}
- if (frame_id_eq (frame_unwind_id (get_current_frame ()),
- step_frame_id))
+ if (frame_id_eq (frame_unwind_id (get_current_frame ()), step_frame_id))
{
/* It's a subroutine call. */
CORE_ADDR real_stop_pc;
-
+
if ((step_over_calls == STEP_OVER_NONE)
|| ((step_range_end == 1)
&& in_prologue (prev_pc, ecs->stop_func_start)))
stop_stepping (ecs);
return;
}
-
+
#ifdef DEPRECATED_IGNORE_HELPER_CALL
/* On MIPS16, a function that returns a floating point value may
- call a library helper function to copy the return value to a
- floating point register. The DEPRECATED_IGNORE_HELPER_CALL
- macro returns non-zero if we should ignore (i.e. step over)
- this function call. */
+ call a library helper function to copy the return value to a
+ floating point register. The DEPRECATED_IGNORE_HELPER_CALL
+ macro returns non-zero if we should ignore (i.e. step over)
+ this function call. */
/* FIXME: cagney/2004-07-21: These custom ``ignore frame when
- stepping'' function attributes (SIGTRAMP_FRAME,
- DEPRECATED_IGNORE_HELPER_CALL, SKIP_TRAMPOLINE_CODE,
- skip_language_trampoline frame, et.al.) need to be replaced
- with generic attributes bound to the frame's function. */
+ stepping'' function attributes (SIGTRAMP_FRAME,
+ DEPRECATED_IGNORE_HELPER_CALL, SKIP_TRAMPOLINE_CODE,
+ skip_language_trampoline frame, et.al.) need to be replaced
+ with generic attributes bound to the frame's function. */
if (DEPRECATED_IGNORE_HELPER_CALL (stop_pc))
{
/* We're doing a "next", set a breakpoint at callee's return
address (the address at which the caller will
resume). */
- insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()),
- ecs);
+ insert_step_resume_breakpoint (get_prev_frame
+ (get_current_frame ()), ecs);
keep_going (ecs);
return;
}
/* We're doing a "next", set a breakpoint at callee's return
address (the address at which the caller will
resume). */
- insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()),
- ecs);
+ insert_step_resume_breakpoint (get_prev_frame
+ (get_current_frame ()), ecs);
keep_going (ecs);
return;
}
/* If we are in a function call trampoline (a stub between the
- calling routine and the real function), locate the real
- function. That's what tells us (a) whether we want to step
- into it at all, and (b) what prologue we want to run to the
- end of, if we do step into it. */
+ calling routine and the real function), locate the real
+ function. That's what tells us (a) whether we want to step
+ into it at all, and (b) what prologue we want to run to the
+ end of, if we do step into it. */
real_stop_pc = skip_language_trampoline (stop_pc);
if (real_stop_pc == 0)
real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
if (real_stop_pc != 0)
ecs->stop_func_start = real_stop_pc;
-
+
if (IN_SOLIB_DYNSYM_RESOLVE_CODE (ecs->stop_func_start))
{
struct symtab_and_line sr_sal;
if (breakpoints_inserted)
insert_breakpoints ();
- keep_going (ecs);
- return;
+ keep_going (ecs);
+ return;
}
/* If we have line number information for the function we are
- thinking of stepping into, step into it.
+ thinking of stepping into, step into it.
- If there are several symtabs at that PC (e.g. with include
- files), just want to know whether *any* of them have line
- numbers. find_pc_line handles this. */
+ If there are several symtabs at that PC (e.g. with include
+ files), just want to know whether *any* of them have line
+ numbers. find_pc_line handles this. */
{
struct symtab_and_line tmp_sal;
-
+
tmp_sal = find_pc_line (ecs->stop_func_start, 0);
if (tmp_sal.line != 0)
{
}
/* If we have no line number and the step-stop-if-no-debug is
- set, we stop the step so that the user has a chance to switch
- in assembly mode. */
+ set, we stop the step so that the user has a chance to switch
+ in assembly mode. */
if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
{
stop_step = 1;
}
/* Set a breakpoint at callee's return address (the address at
- which the caller will resume). */
- insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()), ecs);
+ which the caller will resume). */
+ insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()),
+ ecs);
keep_going (ecs);
return;
}
{
/* Set a breakpoint at callee's return address (the address
at which the caller will resume). */
- insert_step_resume_breakpoint (get_prev_frame (get_current_frame ()),
- ecs);
+ insert_step_resume_breakpoint (get_prev_frame
+ (get_current_frame ()), ecs);
keep_going (ecs);
return;
}
stackless leaf function. I think the logic should instead look
at the unwound frame ID has that should give a more robust
indication of what happened. */
- if (step-ID == current-ID)
- still stepping in same function;
- else if (step-ID == unwind (current-ID))
- stepped into a function;
- else
- stepped out of a function;
- /* Of course this assumes that the frame ID unwind code is robust
- and we're willing to introduce frame unwind logic into this
- function. Fortunately, those days are nearly upon us. */
+ if (step - ID == current - ID)
+ still stepping in same function;
+ else if (step - ID == unwind (current - ID))
+ stepped into a function;
+ else
+ stepped out of a function;
+ /* Of course this assumes that the frame ID unwind code is robust
+ and we're willing to introduce frame unwind logic into this
+ function. Fortunately, those days are nearly upon us. */
#endif
{
struct frame_id current_frame = get_frame_id (get_current_frame ());
``ecs->stop_func_start == stop_pc'' will never succeed. Adjust
ecs->stop_func_start to an address at which a breakpoint may be
legitimately placed.
-
+
Note: kevinb/2004-01-19: On FR-V, if this adjustment is not
made, GDB will enter an infinite loop when stepping through
optimized code consisting of VLIW instructions which contain
set, GDB will adjust the breakpoint address to the beginning of
the VLIW instruction. Thus, we need to make the corresponding
adjustment here when computing the stop address. */
-
+
if (gdbarch_adjust_breakpoint_address_p (current_gdbarch))
{
ecs->stop_func_start
= gdbarch_adjust_breakpoint_address (current_gdbarch,
- ecs->stop_func_start);
+ ecs->stop_func_start);
}
if (ecs->stop_func_start == stop_pc)
{
case PRINT_UNKNOWN:
/* FIXME: cagney/2002-12-01: Given that a frame ID does
- (or should) carry around the function and does (or
- should) use that when doing a frame comparison. */
+ (or should) carry around the function and does (or
+ should) use that when doing a frame comparison. */
if (stop_step
&& frame_id_eq (step_frame_id,
get_frame_id (get_current_frame ()))
projects / external / binutils.git / commitdiff