arm64: dts: allwinner: new board - Emlid Neutis N5
authorAleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
Mon, 15 Oct 2018 11:49:50 +0000 (14:49 +0300)
committerMaxime Ripard <maxime.ripard@bootlin.com>
Mon, 5 Nov 2018 08:22:28 +0000 (09:22 +0100)
Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT
module, DDR3 RAM and eMMC.

- add neutis n5 dtsi file for SoM needs
- add neutis devboard dts file
- add neutis devboard target to dtb makefile

Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
arch/arm64/boot/dts/allwinner/Makefile
arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts [new file with mode: 0644]
arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi [new file with mode: 0644]

index 8d4f97f279e022570b5bb17c5f0e4d692d71f584..9ff8b9d3a9dbc3ed2e1e0fab189332e2885c3a45 100644 (file)
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-libretech-all-h3-cc.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts
new file mode 100644 (file)
index 0000000..85e7993
--- /dev/null
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTS for Emlid Neutis N5 Dev board.
+ *
+ * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5-emlid-neutis-n5.dtsi"
+
+/ {
+       model = "Emlid Neutis N5 Developer board";
+       compatible = "emlid,neutis-n5-devboard",
+                    "emlid,neutis-n5",
+                    "allwinner,sun50i-h5";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&hdmi_out_con>;
+                       };
+               };
+       };
+
+       reg_usb0_vbus: usb0-vbus {
+               compatible = "regulator-fixed";
+               regulator-name = "usb0-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;   /* PL9 */
+               status = "okay";
+       };
+
+       vdd_cpux: gpio-regulator {
+               compatible = "regulator-gpio";
+               pinctrl-names = "default";
+               regulator-name = "vdd-cpux";
+               regulator-type = "voltage";
+               regulator-boot-on;
+               regulator-always-on;
+               regulator-min-microvolt = <1100000>;
+               regulator-max-microvolt = <1300000>;
+               regulator-ramp-delay = <50>; /* 4ms */
+               gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
+               gpios-states = <0x1>;
+               states = <1100000 0x0
+                         1300000 0x1>;
+       };
+};
+
+&codec {
+       allwinner,audio-routing =
+               "Line Out", "LINEOUT",
+               "LINEIN", "Line In",
+               "MIC1", "Mic",
+               "MIC2", "Mic",
+               "Mic",  "MBIAS";
+       status = "okay";
+};
+
+&de {
+       status = "okay";
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&ehci2 {
+       status = "okay";
+};
+
+&ehci3 {
+       status = "okay";
+};
+
+&emac {
+       phy-handle = <&int_mii_phy>;
+       phy-mode = "mii";
+       allwinner,leds-active-low;
+       status = "okay";
+};
+
+&hdmi {
+       status = "okay";
+};
+
+&hdmi_out {
+       hdmi_out_con: endpoint {
+               remote-endpoint = <&hdmi_con_in>;
+       };
+};
+
+&mmc0 {
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&ohci2 {
+       status = "okay";
+};
+
+&ohci3 {
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usbphy {
+       usb0_id_det-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
+       usb0_vbus-supply = <&reg_usb0_vbus>;
+       status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-emlid-neutis-n5.dtsi
new file mode 100644 (file)
index 0000000..e4d5037
--- /dev/null
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * DTSI for Emlid Neutis N5 SoM.
+ *
+ * Copyright (C) 2018 Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h5.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       reg_vcc3v3: vcc3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
+       wifi_pwrseq: wifi_pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               pinctrl-names = "default";
+               reset-gpios = <&pio 2 7 GPIO_ACTIVE_LOW>; /* PC7 */
+               post-power-on-delay-ms = <200>;
+       };
+};
+
+&mmc1 {
+       vmmc-supply = <&reg_vcc3v3>;
+       vqmmc-supply = <&reg_vcc3v3>;
+       mmc-pwrseq = <&wifi_pwrseq>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+
+       brcmf: wifi@1 {
+               reg = <1>;
+               compatible = "brcm,bcm4329-fmac";
+               interrupt-parent = <&r_pio>;
+               interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>;  /* PL5 */
+               interrupt-names = "host-wake";
+       };
+};
+
+&mmc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_8bit_pins>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <8>;
+       non-removable;
+       cap-mmc-hw-reset;
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+       status = "okay";
+};