--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_CONNECTTIMEOUT 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_CONNECTTIMEOUT \- timeout for the connect phase
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_CONNECTTIMEOUT, long timeout);
+.SH DESCRIPTION
+Pass a long. It should contain the maximum time in seconds that you allow the
+connection phase to the server to take. This only limits the connection
+phase, it has no impact once it has connected. Set to zero to switch to the
+default built-in connection timeout - 300 seconds. See also the
+\fICURLOPT_TIMEOUT(3)\fP option.
+
+In unix-like systems, this might cause signals to be used unless
+\fICURLOPT_NOSIGNAL(3)\fP is set.
+.SH DEFAULT
+300
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+Always
+.SH RETURN VALUE
+Returns CURLE_OK
+.SH "SEE ALSO"
+.BR CURLOPT_TIMEOUT "(3), " CURLOPT_LOW_SPEED_LIMIT "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_COOKIEJAR 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_COOKIEJAR \- file name to store cookies to
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_COOKIEJAR, char *filename);
+.SH DESCRIPTION
+Pass a \fIfilename\fP as char *, zero terminated. This will make libcurl write
+all internally known cookies to the specified file when
+\fIcurl_easy_cleanup(3)\fP is called. If no cookies are known, no file will be
+created. Specify "-" as filename to instead have the cookies written to
+stdout. Using this option also enables cookies for this session, so if you for
+example follow a location it will make matching cookies get sent accordingly.
+
+Note that libcurl doesn't read any cookies from the cookie jar. If you want to
+read cookies from a file, use \fICURLOPT_COOKIEFILE(3)\fP.
+
+If the cookie jar file can't be created or written to (when the
+\fIcurl_easy_cleanup(3)\fP is called), libcurl will not and cannot report an
+error for this. Using \fICURLOPT_VERBOSE(3)\fP or
+\fICURLOPT_DEBUGFUNCTION(3)\fP will get a warning to display, but that is the
+only visible feedback you get about this possibly lethal situation.
+.SH DEFAULT
+NULL
+.SH PROTOCOLS
+HTTP
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+Along with HTTP
+.SH RETURN VALUE
+Returns CURLE_OK if HTTP is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_COOKIEFILE "(3), " CURLOPT_COOKIE "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_DNS_CACHE_TIMEOUT 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_DNS_CACHE_TIMEOUT \- set life-time for DNS cache entries
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_DNS_CACHE_TIMEOUT, long age);
+.SH DESCRIPTION
+Pass a long, this sets the timeout in seconds. Name resolves will be kept in
+memory and used for this number of seconds. Set to zero to completely disable
+caching, or set to -1 to make the cached entries remain forever. By default,
+libcurl caches this info for 60 seconds.
+
+The name resolve functions of various libc implementations don't re-read name
+server information unless explicitly told so (for example, by calling
+\fIres_init(3)\fP). This may cause libcurl to keep using the older server even
+if DHCP has updated the server info, and this may look like a DNS cache issue
+to the casual libcurl-app user.
+
+Note that DNS entries have a "TTL" property but libcurl doesn't use that. This
+DNS cache timeout is entirely speculative that a name will resolve to the same
+address for a certain small amount of time into the future.
+.SH DEFAULT
+60
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+Always
+.SH RETURN VALUE
+Returns CURLE_OK
+.SH "SEE ALSO"
+.BR CURLOPT_DNS_USE_GLOBAL_CACHE "(3), " CURLOPT_DNS_SERVERS "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_DNS_USE_GLOBAL_CACHE 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_DNS_USE_GLOBAL_CACHE \- enable/disable global DNS cache
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_DNS_USE_GLOBAL_CACHE,
+ long enable);
+.SH DESCRIPTION
+Pass a long. If the \fIenable\fP value is 1, it tells curl to use a global DNS
+cache that will survive between easy handle creations and deletions. This is
+not thread-safe and this will use a global variable.
+
+\fBWARNING:\fP this option is considered obsolete. Stop using it. Switch over
+to using the share interface instead! See \fICURLOPT_SHARE(3)\fP and
+\fIcurl_share_init(3)\fP.
+.SH DEFAULT
+0
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+Subject for removal in the future. Do not use!
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_SHARE "(3), " CURLOPT_DNS_CACHE_TIMEOUT "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_EGDSOCKET 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_EGDSOCKET \- set EGD socket path
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_EGDSOCKET, char *path);
+.SH DESCRIPTION
+Pass a char * to the zero terminated path name to the Entropy Gathering Daemon
+socket. It will be used to seed the random engine for SSL.
+.SH DEFAULT
+NULL
+.SH PROTOCOLS
+All TLS based protocols: HTTPS, FTPS, IMAPS, POP3, SMTPS etc.
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+If built TLS enabled. Only the OpenSSL and GnuTLS backends will use this.
+.SH RETURN VALUE
+Returns CURLE_OK if TLS is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_RANDOM_FILE "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_FTP_USE_EPSV 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_FTP_USE_EPSV \- enable/disable use of EPSV
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_FTP_USE_EPSV, long epsv);
+.SH DESCRIPTION
+Pass \fIepsv\fP as a long. If the value is 1, it tells curl to use the EPSV
+command when doing passive FTP downloads (which it does by default). Using
+EPSV means that it will first attempt to use EPSV before using PASV, but if
+you pass zero to this option, it will not try using EPSV, only plain PASV.
+
+If the server is an IPv6 host, this option will have no effect as of 7.12.3.
+.SH DEFAULT
+1
+.SH PROTOCOLS
+FTP
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+Along with FTP
+.SH RETURN VALUE
+Returns CURLE_OK if FTP is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_FTP_USE_EPRT "(3), " CURLOPT_FTPPORT "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_HTTPGET 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_HTTPGET \- [short desc]
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_HTTPGET, long useget);
+.SH DESCRIPTION
+Pass a long. If \fIuseget\fP is 1, this forces the HTTP request to get back to
+using GET. Usable if a POST, HEAD, PUT, etc has been used previously using the
+same curl \fIhandle\fP.
+
+When setting \fICURLOPT_HTTPGET(3)\fP to 1, it will automatically set
+\fICURLOPT_NOBODY(3)\fP to 0 and \fICURLOPT_UPLOAD(3)\fP to 0.
+.SH DEFAULT
+0
+.SH PROTOCOLS
+HTTP
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+Along with HTTP
+.SH RETURN VALUE
+Returns CURLE_OK if HTTP is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_NOBODY "(3), " CURLOPT_UPLOAD "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_HTTP_VERSION 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_HTTP_VERSION \- specify HTTP protocol version to use
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_HTTP_VERSION, long version);
+.SH DESCRIPTION
+Pass \fIversion\fP a long, set to one of the values described below. They
+force libcurl to use the specific HTTP versions. This is not sensible to do
+unless you have a good reason. You have to set this option if you want to use
+libcurl's HTTP/2 support.
+
+.IP CURL_HTTP_VERSION_NONE
+We don't care about what version the library uses. libcurl will use whatever
+it thinks fit.
+.IP CURL_HTTP_VERSION_1_0
+Enforce HTTP 1.0 requests.
+.IP CURL_HTTP_VERSION_1_1
+Enforce HTTP 1.1 requests.
+.IP CURL_HTTP_VERSION_2_0
+Attempt HTTP 2.0 requests. libcurl will fall back to HTTP 1.x if HTTP 2.0
+can't be negotiated with the server.
+.SH DEFAULT
+CURL_HTTP_VERSION_NONE
+.SH PROTOCOLS
+HTTP
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+Along with HTTP
+.SH RETURN VALUE
+Returns CURLE_OK if HTTP is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_SSLVERSION "(3), " CURLOPT_HTTP200ALIASES "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_PREQUOTE 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_PREQUOTE \- commands to run before FTP or SFTP transfer
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PREQUOTE, char *cmds);
+.SH DESCRIPTION
+Pass a pointer to a linked list of FTP or SFTP commands to pass to the server
+after the transfer type is set. The linked list should be a fully valid list
+of struct curl_slist structs properly filled in as described for
+\fICURLOPT_QUOTE(3)\fP. Disable this operation again by setting a NULL to this
+option.
+.SH DEFAULT
+NULL
+.SH PROTOCOLS
+FTP and SFTP
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+Along with the protocol support
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_QUOTE "(3), " CURLOPT_POSTQUOTE "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_SSLCERTTYPE 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_SSLCERTTYPE \- specify type of the client SSL certficate
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSLCERTTYPE, char *type);
+.SH DESCRIPTION
+Pass a pointer to a zero terminated string as parameter. The string should be
+the format of your certificate. Supported formats are "PEM" and "DER", except
+with Secure Transport. OpenSSL (versions 0.9.3 and later) and Secure Transport
+(on iOS 5 or later, or OS X 10.7 or later) also support "P12" for
+PKCS#12-encoded files.
+.SH DEFAULT
+"PEM"
+.SH PROTOCOLS
+All TLS based protocols: HTTPS, FTPS, IMAPS, POP3, SMTPS etc.
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+If built TLS enabled. Added in 7.9.3
+.SH RETURN VALUE
+Returns CURLE_OK if TLS is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_SSLCERT "(3), " CURLOPT_SSLKEY "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_SSLENGINE 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_SSLENGINE \- set SSL engine identifier
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSLENGINE, char *id);
+.SH DESCRIPTION
+Pass a pointer to a zero terminated string as parameter. It will be used as
+the identifier for the crypto engine you want to use for your private key.
+
+If the crypto device cannot be loaded, \fICURLE_SSL_ENGINE_NOTFOUND\fP is
+returned.
+.SH DEFAULT
+NULL
+.SH PROTOCOLS
+All TLS based protocols: HTTPS, FTPS, IMAPS, POP3, SMTPS etc.
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+If built TLS enabled.
+.SH RETURN VALUE
+Returns CURLE_OK if TLS is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_SSLENGINE_DEFAULT "(3), " CURLOPT_SSLKEY "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_SSLENGINE_DEFAULT 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_SSLENGINE_DEFAULT \- make SSL engine default
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSLENGINE_DEFAULT, long val);
+.SH DESCRIPTION
+Pass a long set to 1 as parameter. Sets the actual crypto engine as the
+default for (asymmetric) crypto operations.
+
+If the crypto device cannot be set, \fICURLE_SSL_ENGINE_SETFAILED\fP is
+returned.
+.SH DEFAULT
+None
+.SH PROTOCOLS
+All TLS based protocols: HTTPS, FTPS, IMAPS, POP3, SMTPS etc.
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+If built TLS enabled.
+.SH RETURN VALUE
+Returns CURLE_OK if TLS is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_SSLENGINE "(3), " CURLOPT_SSLCERT "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_SSLKEY 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_SSLKEY \- specify private keyfile for TLS and SSL client cert
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSLKEY, char *keyfile);
+.SH DESCRIPTION
+Pass a pointer to a zero terminated string as parameter. The string should be
+the file name of your private key. The default format is "PEM" and can be
+changed with \fICURLOPT_SSLKEYTYPE(3)\fP.
+
+(iOS and Mac OS X only) This option is ignored if curl was built against
+Secure Transport. Secure Transport expects the private key to be already
+present in the keychain or PKCS#12 file containing the certificate.
+.SH DEFAULT
+NULL
+.SH PROTOCOLS
+All TLS based protocols: HTTPS, FTPS, IMAPS, POP3, SMTPS etc.
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+If built TLS enabled.
+.SH RETURN VALUE
+Returns CURLE_OK if TLS is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_SSLKEYTYPE "(3), " CURLOPT_SSLCERT "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_SSLKEYTYPE 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_SSLKEYTYPE \- set type of the private key file
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSLKEYTYPE, char *type);
+.SH DESCRIPTION
+Pass a pointer to a zero terminated string as parameter. The string should be
+the format of your private key. Supported formats are "PEM", "DER" and "ENG".
+
+The format "ENG" enables you to load the private key from a crypto engine. In
+this case \fICURLOPT_SSLKEY(3)\fP is used as an identifier passed to the
+engine. You have to set the crypto engine with \fICURLOPT_SSLENGINE(3)\fP.
+\&"DER" format key file currently does not work because of a bug in OpenSSL.
+.SH DEFAULT
+"PEM"
+.SH PROTOCOLS
+All TLS based protocols: HTTPS, FTPS, IMAPS, POP3, SMTPS etc.
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+If built TLS enabled.
+.SH RETURN VALUE
+Returns CURLE_OK if TLS is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_SSLKEY "(3), " CURLOPT_SSLCERT "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_SSL_CIPHER_LIST 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_SSL_CIPHER_LIST \- specify ciphers to use for TLS
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSL_CIPHER_LIST, char *list);
+.SH DESCRIPTION
+Pass a char *, pointing to a zero terminated string holding the list of
+ciphers to use for the SSL connection. The list must be syntactically correct,
+it consists of one or more cipher strings separated by colons. Commas or
+spaces are also acceptable separators but colons are normally used, \&!, \&-
+and \&+ can be used as operators.
+
+For OpenSSL and GnuTLS valid examples of cipher lists include 'RC4-SHA',
+\'SHA1+DES\', 'TLSv1' and 'DEFAULT'. The default list is normally set when you
+compile OpenSSL.
+
+You'll find more details about cipher lists on this URL:
+
+ http://www.openssl.org/docs/apps/ciphers.html
+
+For NSS, valid examples of cipher lists include 'rsa_rc4_128_md5',
+\'rsa_aes_128_sha\', etc. With NSS you don't add/remove ciphers. If one uses
+this option then all known ciphers are disabled and only those passed in are
+enabled.
+
+You'll find more details about the NSS cipher lists on this URL:
+
+ http://git.fedorahosted.org/cgit/mod_nss.git/plain/docs/mod_nss.html#Directives
+.SH DEFAULT
+NULL, use internal default
+.SH PROTOCOLS
+All TLS based protocols: HTTPS, FTPS, IMAPS, POP3, SMTPS etc.
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+If built TLS enabled.
+.SH RETURN VALUE
+Returns CURLE_OK if TLS is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR CURLOPT_SSLVERSION "(3), " CURLOPT_USE_SSL "(3), "
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at http://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLOPT_SSL_VERIFYHOST 3 "17 Jun 2014" "libcurl 7.37.0" "curl_easy_setopt options"
+.SH NAME
+CURLOPT_SSL_VERIFYHOST \- verify the certificate's name against host
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_setopt(CURL *handle, CURLOPT_SSL_VERIFYHOST, long verify);
+.SH DESCRIPTION
+Pass a long as parameter specifying what to \fIverify\fP.
+
+This option determines whether libcurl verifies that the server cert is for
+the server it is known as.
+
+When negotiating TLS and SSL connections, the server sends a certificate
+indicating its identity.
+
+When \fICURLOPT_SSL_VERIFYHOST(3)\fP is 2, that certificate must indicate that
+the server is the server to which you meant to connect, or the connection
+fails. Simply put, it means it has to have the same name in the certificate as
+is in the URL you operate against.
+
+Curl considers the server the intended one when the Common Name field or a
+Subject Alternate Name field in the certificate matches the host name in the
+URL to which you told Curl to connect.
+
+When the \fIverify\fP value is 1, \fIcurl_easy_setopt\fP will return an error
+and the option value will not be changed. It was previously (in 7.28.0 and
+earlier) a debug option of some sorts, but it is no longer supported due to
+frequently leading to programmer mistakes. Future versions will stop returning
+an error for 1 and just treat 1 and 2 the same.
+
+When the \fIverify\fP value is 0, the connection succeeds regardless of the
+names in the certificate. Use that ability with caution!
+
+The default value for this option is 2.
+
+This option controls checking the server's certificate's claimed identity.
+The server could be lying. To control lying, see
+\fICURLOPT_SSL_VERIFYPEER(3)\fP. If libcurl is built against NSS and
+\fICURLOPT_SSL_VERIFYPEER(3)\fP is zero, \fICURLOPT_SSL_VERIFYHOST(3)\fP is
+also set to zero and cannot be overridden.
+.SH DEFAULT
+2
+.SH PROTOCOLS
+All TLS based protocols: HTTPS, FTPS, IMAPS, POP3, SMTPS etc.
+.SH EXAMPLE
+TODO
+.SH AVAILABILITY
+If built TLS enabled.
+.SH RETURN VALUE
+Returns CURLE_OK if TLS is supported, and CURLE_UNKNOWN_OPTION if not.
+
+If 1 is set as argument, \fICURLE_BAD_FUNCTION_ARGUMENT\fP is returned.
+.SH "SEE ALSO"
+.BR CURLOPT_SSL_VERIFYPEER "(3), " CURLOPT_CAINFO "(3), "
projects / platform / upstream / curl.git / commitdiff