memory: Move TI_AEMIF config to KCONFIG

Not all Keystone2 devices has AEMIF NAND controller. So adding Kconfig
entry for CONFIG_TI_AEMIF and enabling it in respective defconfigs on
platforms with AEMIF controller.

Reported-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c
index e16669d..9e8ad93 100644 (file)
--- a/board/ti/ks2_evm/board.c
+++ b/board/ti/ks2_evm/board.c
@@ -20,6 +20,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_TI_AEMIF)
 static struct aemif_config aemif_configs[] = {
        {                       /* CS0 */
                .mode           = AEMIF_MODE_NAND,
@@ -33,6 +34,7 @@ static struct aemif_config aemif_configs[] = {
                .width          = AEMIF_WIDTH_8,
        },
 };
+#endif
 
 int dram_init(void)
 {
@@ -42,7 +44,10 @@ int dram_init(void)
 
        gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
                                    CONFIG_MAX_RAM_BANK_SIZE);
+#if defined(CONFIG_TI_AEMIF)
        aemif_init(ARRAY_SIZE(aemif_configs), aemif_configs);
+#endif
+
        if (ddr3_size)
                ddr3_init_ecc(KS2_DDR3A_EMIF_CTRL_BASE, ddr3_size);
        return 0;

diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig
index a3fa758..f45bce0 100644 (file)
--- a/configs/k2e_evm_defconfig
+++ b/configs/k2e_evm_defconfig
@@ -15,3 +15,4 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_DM_ETH=y
 CONFIG_SYS_NS16550=y
+CONFIG_TI_AEMIF=y

diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index 83efcbb..56b3fe4 100644 (file)
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -15,3 +15,4 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_DM_ETH=y
 CONFIG_SYS_NS16550=y
+CONFIG_TI_AEMIF=y

diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
index d2ebb1d..3863c56 100644 (file)
--- a/configs/k2l_evm_defconfig
+++ b/configs/k2l_evm_defconfig
@@ -15,3 +15,4 @@ CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_DM_ETH=y
 CONFIG_SYS_NS16550=y
+CONFIG_TI_AEMIF=y

diff --git a/drivers/Kconfig b/drivers/Kconfig
index c82a94b..118b66e 100644 (file)
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -30,6 +30,8 @@ source "drivers/input/Kconfig"
 
 source "drivers/led/Kconfig"
 
+source "drivers/memory/Kconfig"
+
 source "drivers/misc/Kconfig"
 
 source "drivers/mmc/Kconfig"

diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
new file mode 100644 (file)
index 0000000..4fbb5aa
--- /dev/null
+++ b/drivers/memory/Kconfig
@@ -0,0 +1,18 @@
+#
+# Memory devices
+#
+
+menu "Memory Controller drivers"
+
+config TI_AEMIF
+       tristate "Texas Instruments AEMIF driver"
+       depends on ARCH_KEYSTONE
+       help
+         This driver is for the AEMIF module available in Texas Instruments
+         SoCs. AEMIF stands for Asynchronous External Memory Interface and
+         is intended to provide a glue-less interface to a variety of
+         asynchronuous memory devices like ASRAM, NOR and NAND memory. A total
+         of 256M bytes of any of these memories can be accessed at a given
+         time via four chip selects with 64M byte access per chip select.
+
+endmenu

diff --git a/include/configs/ti_armv7_keystone2.h b/include/configs/ti_armv7_keystone2.h
index 41185a1..61c7174 100644 (file)
--- a/include/configs/ti_armv7_keystone2.h
+++ b/include/configs/ti_armv7_keystone2.h
@@ -145,8 +145,6 @@
 /* SerDes */
 #define CONFIG_TI_KEYSTONE_SERDES
 
-/* AEMIF */
-#define CONFIG_TI_AEMIF
 #define CONFIG_AEMIF_CNTRL_BASE                KS2_AEMIF_CNTRL_BASE
 
 /* I2C Configuration */