rockchip: rk3288-phycore: move phycore_init() to its own board file

phycore_init() is use for phycore board only, it should be move back
to phycore-rk3288.c

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>

diff --git a/arch/arm/mach-rockchip/rk3288-board-spl.c b/arch/arm/mach-rockchip/rk3288-board-spl.c
index 6db5369..13cd860 100644 (file)
--- a/arch/arm/mach-rockchip/rk3288-board-spl.c
+++ b/arch/arm/mach-rockchip/rk3288-board-spl.c
@@ -25,8 +25,6 @@
 #include <dm/root.h>
 #include <dm/test.h>
 #include <dm/util.h>
-#include <power/regulator.h>
-#include <power/rk8xx_pmic.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -81,32 +79,6 @@ fallback:
        return BOOT_DEVICE_MMC1;
 }
 
-#if !defined(CONFIG_SPL_OF_PLATDATA)
-static int phycore_init(void)
-{
-       struct udevice *pmic;
-       int ret;
-
-       ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
-       if (ret)
-               return ret;
-
-#if defined(CONFIG_SPL_POWER_SUPPORT)
-       /* Increase USB input current to 2A */
-       ret = rk818_spl_configure_usb_input_current(pmic, 2000);
-       if (ret)
-               return ret;
-
-       /* Close charger when USB lower then 3.26V */
-       ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
-       if (ret)
-               return ret;
-#endif
-
-       return 0;
-}
-#endif
-
 __weak int arch_cpu_init(void)
 {
        return 0;
@@ -175,17 +147,6 @@ void board_init_f(ulong dummy)
                return;
        }
 
-#if !defined(CONFIG_SPL_OF_PLATDATA)
-       if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
-               ret = phycore_init();
-               if (ret) {
-                       debug("Failed to set up phycore power settings: %d\n",
-                             ret);
-                       return;
-               }
-       }
-#endif
-
 #if !defined(CONFIG_SUPPORT_TPL)
        debug("\nspl:init dram\n");
        ret = uclass_get_device(UCLASS_RAM, 0, &dev);

diff --git a/arch/arm/mach-rockchip/rk3288/Kconfig b/arch/arm/mach-rockchip/rk3288/Kconfig
index 6e3ab1d..87d0786 100644 (file)
--- a/arch/arm/mach-rockchip/rk3288/Kconfig
+++ b/arch/arm/mach-rockchip/rk3288/Kconfig
@@ -85,6 +85,7 @@ config TARGET_MIQI_RK3288
 config TARGET_PHYCORE_RK3288
        bool "phyCORE-RK3288"
         select BOARD_LATE_INIT
+       select SPL_BOARD_INIT if SPL
        help
          Add basic support for the PCM-947 carrier board, a RK3288 based
          development board made by PHYTEC. This board works in a combination

diff --git a/board/phytec/phycore_rk3288/phycore-rk3288.c b/board/phytec/phycore_rk3288/phycore-rk3288.c
index ffe1833..fbf1511 100644 (file)
--- a/board/phytec/phycore_rk3288/phycore-rk3288.c
+++ b/board/phytec/phycore_rk3288/phycore-rk3288.c
@@ -8,10 +8,13 @@
 #include <common.h>
 #include <dm.h>
 #include <environment.h>
+#include <fdtdec.h>
 #include <i2c.h>
 #include <i2c_eeprom.h>
 #include <netdev.h>
 #include "som.h"
+#include <power/regulator.h>
+#include <power/rk8xx_pmic.h>
 
 static int valid_rk3288_som(struct rk3288_som *som)
 {
@@ -68,3 +71,47 @@ int rk_board_late_init(void)
 
        return 0;
 }
+
+#ifdef CONFIG_SPL_BUILD
+#if !defined(CONFIG_SPL_OF_PLATDATA)
+static int phycore_init(void)
+{
+       struct udevice *pmic;
+       int ret;
+
+       ret = uclass_first_device_err(UCLASS_PMIC, &pmic);
+       if (ret)
+               return ret;
+
+#if defined(CONFIG_SPL_POWER_SUPPORT)
+       /* Increase USB input current to 2A */
+       ret = rk818_spl_configure_usb_input_current(pmic, 2000);
+       if (ret)
+               return ret;
+
+       /* Close charger when USB lower then 3.26V */
+       ret = rk818_spl_configure_usb_chrg_shutdown(pmic, 3260000);
+       if (ret)
+               return ret;
+#endif
+
+       return 0;
+}
+#endif
+
+void spl_board_init(void)
+{
+#if !defined(CONFIG_SPL_OF_PLATDATA)
+       int ret;
+
+       if (of_machine_is_compatible("phytec,rk3288-phycore-som")) {
+               ret = phycore_init();
+               if (ret) {
+                       debug("Failed to set up phycore power settings: %d\n",
+                             ret);
+                       return;
+               }
+       }
+#endif
+}
+#endif