kmem_zone_t *xfs_inode_zone;
/*
- * Used in xfs_itruncate(). This is the maximum number of extents
+ * Used in xfs_itruncate_extents(). This is the maximum number of extents
* freed from a file in a single transaction.
*/
#define XFS_ITRUNC_MAX_EXTENTS 2
* at least do it for regular files.
*/
#ifdef DEBUG
-void
+STATIC void
xfs_isize_check(
- xfs_mount_t *mp,
- xfs_inode_t *ip,
- xfs_fsize_t isize)
+ struct xfs_inode *ip,
+ xfs_fsize_t isize)
{
- xfs_fileoff_t map_first;
- int nimaps;
- xfs_bmbt_irec_t imaps[2];
+ struct xfs_mount *mp = ip->i_mount;
+ xfs_fileoff_t map_first;
+ int nimaps;
+ xfs_bmbt_irec_t imaps[2];
if ((ip->i_d.di_mode & S_IFMT) != S_IFREG)
return;
ASSERT(nimaps == 1);
ASSERT(imaps[0].br_startblock == HOLESTARTBLOCK);
}
+#else /* DEBUG */
+#define xfs_isize_check(ip, isize)
#endif /* DEBUG */
/*
- * Free up the underlying blocks past new_size. The new size must be
- * smaller than the current size.
+ * Free up the underlying blocks past new_size. The new size must be smaller
+ * than the current size. This routine can be used both for the attribute and
+ * data fork, and does not modify the inode size, which is left to the caller.
*
* The transaction passed to this routine must have made a permanent log
* reservation of at least XFS_ITRUNCATE_LOG_RES. This routine may commit the
* will be "held" within the returned transaction. This routine does NOT
* require any disk space to be reserved for it within the transaction.
*
- * The fork parameter must be either XFS_ATTR_FORK or XFS_DATA_FORK, and it
- * indicates the fork which is to be truncated. For the attribute fork we only
- * support truncation to size 0.
- *
- * We use the sync parameter to indicate whether or not the first transaction
- * we perform might have to be synchronous. For the attr fork, it needs to be
- * so if the unlink of the inode is not yet known to be permanent in the log.
- * This keeps us from freeing and reusing the blocks of the attribute fork
- * before the unlink of the inode becomes permanent.
- *
- * For the data fork, we normally have to run synchronously if we're being
- * called out of the inactive path or we're being called out of the create path
- * where we're truncating an existing file. Either way, the truncate needs to
- * be sync so blocks don't reappear in the file with altered data in case of a
- * crash. wsync filesystems can run the first case async because anything that
- * shrinks the inode has to run sync so by the time we're called here from
- * inactive, the inode size is permanently set to 0.
- *
- * Calls from the truncate path always need to be sync unless we're in a wsync
- * filesystem and the file has already been unlinked.
- *
- * The caller is responsible for correctly setting the sync parameter. It gets
- * too hard for us to guess here which path we're being called out of just
- * based on inode state.
- *
* If we get an error, we must return with the inode locked and linked into the
* current transaction. This keeps things simple for the higher level code,
* because it always knows that the inode is locked and held in the transaction
* dirty on error so that transactions can be easily aborted if possible.
*/
int
-xfs_itruncate_finish(
- xfs_trans_t **tp,
- xfs_inode_t *ip,
- xfs_fsize_t new_size,
- int fork,
- int sync)
+xfs_itruncate_extents(
+ struct xfs_trans **tpp,
+ struct xfs_inode *ip,
+ int whichfork,
+ xfs_fsize_t new_size)
{
- xfs_fsblock_t first_block;
- xfs_fileoff_t first_unmap_block;
- xfs_fileoff_t last_block;
- xfs_filblks_t unmap_len=0;
- xfs_mount_t *mp;
- xfs_trans_t *ntp;
- int done;
- int committed;
- xfs_bmap_free_t free_list;
- int error;
+ struct xfs_mount *mp = ip->i_mount;
+ struct xfs_trans *tp = *tpp;
+ struct xfs_trans *ntp;
+ xfs_bmap_free_t free_list;
+ xfs_fsblock_t first_block;
+ xfs_fileoff_t first_unmap_block;
+ xfs_fileoff_t last_block;
+ xfs_filblks_t unmap_len;
+ int committed;
+ int error = 0;
+ int done = 0;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL));
- ASSERT((new_size == 0) || (new_size <= ip->i_size));
- ASSERT(*tp != NULL);
- ASSERT((*tp)->t_flags & XFS_TRANS_PERM_LOG_RES);
- ASSERT(ip->i_transp == *tp);
+ ASSERT(new_size <= ip->i_size);
+ ASSERT(tp->t_flags & XFS_TRANS_PERM_LOG_RES);
+ ASSERT(ip->i_transp == tp);
ASSERT(ip->i_itemp != NULL);
ASSERT(ip->i_itemp->ili_lock_flags == 0);
-
-
- ntp = *tp;
- mp = (ntp)->t_mountp;
- ASSERT(! XFS_NOT_DQATTACHED(mp, ip));
-
- /*
- * We only support truncating the entire attribute fork.
- */
- if (fork == XFS_ATTR_FORK) {
- new_size = 0LL;
- }
- first_unmap_block = XFS_B_TO_FSB(mp, (xfs_ufsize_t)new_size);
- trace_xfs_itruncate_finish_start(ip, new_size);
-
- /*
- * The first thing we do is set the size to new_size permanently
- * on disk. This way we don't have to worry about anyone ever
- * being able to look at the data being freed even in the face
- * of a crash. What we're getting around here is the case where
- * we free a block, it is allocated to another file, it is written
- * to, and then we crash. If the new data gets written to the
- * file but the log buffers containing the free and reallocation
- * don't, then we'd end up with garbage in the blocks being freed.
- * As long as we make the new_size permanent before actually
- * freeing any blocks it doesn't matter if they get written to.
- *
- * The callers must signal into us whether or not the size
- * setting here must be synchronous. There are a few cases
- * where it doesn't have to be synchronous. Those cases
- * occur if the file is unlinked and we know the unlink is
- * permanent or if the blocks being truncated are guaranteed
- * to be beyond the inode eof (regardless of the link count)
- * and the eof value is permanent. Both of these cases occur
- * only on wsync-mounted filesystems. In those cases, we're
- * guaranteed that no user will ever see the data in the blocks
- * that are being truncated so the truncate can run async.
- * In the free beyond eof case, the file may wind up with
- * more blocks allocated to it than it needs if we crash
- * and that won't get fixed until the next time the file
- * is re-opened and closed but that's ok as that shouldn't
- * be too many blocks.
- *
- * However, we can't just make all wsync xactions run async
- * because there's one call out of the create path that needs
- * to run sync where it's truncating an existing file to size
- * 0 whose size is > 0.
- *
- * It's probably possible to come up with a test in this
- * routine that would correctly distinguish all the above
- * cases from the values of the function parameters and the
- * inode state but for sanity's sake, I've decided to let the
- * layers above just tell us. It's simpler to correctly figure
- * out in the layer above exactly under what conditions we
- * can run async and I think it's easier for others read and
- * follow the logic in case something has to be changed.
- * cscope is your friend -- rcc.
- *
- * The attribute fork is much simpler.
- *
- * For the attribute fork we allow the caller to tell us whether
- * the unlink of the inode that led to this call is yet permanent
- * in the on disk log. If it is not and we will be freeing extents
- * in this inode then we make the first transaction synchronous
- * to make sure that the unlink is permanent by the time we free
- * the blocks.
- */
- if (fork == XFS_DATA_FORK) {
- if (ip->i_d.di_nextents > 0) {
- /*
- * If we are not changing the file size then do
- * not update the on-disk file size - we may be
- * called from xfs_inactive_free_eofblocks(). If we
- * update the on-disk file size and then the system
- * crashes before the contents of the file are
- * flushed to disk then the files may be full of
- * holes (ie NULL files bug).
- */
- if (ip->i_size != new_size) {
- ip->i_d.di_size = new_size;
- ip->i_size = new_size;
- xfs_trans_log_inode(ntp, ip, XFS_ILOG_CORE);
- }
- }
- } else if (sync) {
- ASSERT(!(mp->m_flags & XFS_MOUNT_WSYNC));
- if (ip->i_d.di_anextents > 0)
- xfs_trans_set_sync(ntp);
- }
- ASSERT(fork == XFS_DATA_FORK ||
- (fork == XFS_ATTR_FORK &&
- ((sync && !(mp->m_flags & XFS_MOUNT_WSYNC)) ||
- (sync == 0 && (mp->m_flags & XFS_MOUNT_WSYNC)))));
+ ASSERT(!XFS_NOT_DQATTACHED(mp, ip));
/*
* Since it is possible for space to become allocated beyond
* beyond the maximum file size (ie it is the same as last_block),
* then there is nothing to do.
*/
+ first_unmap_block = XFS_B_TO_FSB(mp, (xfs_ufsize_t)new_size);
last_block = XFS_B_TO_FSB(mp, (xfs_ufsize_t)XFS_MAXIOFFSET(mp));
- ASSERT(first_unmap_block <= last_block);
- done = 0;
- if (last_block == first_unmap_block) {
- done = 1;
- } else {
- unmap_len = last_block - first_unmap_block + 1;
- }
+ if (first_unmap_block == last_block)
+ return 0;
+
+ ASSERT(first_unmap_block < last_block);
+ unmap_len = last_block - first_unmap_block + 1;
while (!done) {
- /*
- * Free up up to XFS_ITRUNC_MAX_EXTENTS. xfs_bunmapi()
- * will tell us whether it freed the entire range or
- * not. If this is a synchronous mount (wsync),
- * then we can tell bunmapi to keep all the
- * transactions asynchronous since the unlink
- * transaction that made this inode inactive has
- * already hit the disk. There's no danger of
- * the freed blocks being reused, there being a
- * crash, and the reused blocks suddenly reappearing
- * in this file with garbage in them once recovery
- * runs.
- */
xfs_bmap_init(&free_list, &first_block);
- error = xfs_bunmapi(ntp, ip,
+ error = xfs_bunmapi(tp, ip,
first_unmap_block, unmap_len,
- xfs_bmapi_aflag(fork),
+ xfs_bmapi_aflag(whichfork),
XFS_ITRUNC_MAX_EXTENTS,
&first_block, &free_list,
&done);
- if (error) {
- /*
- * If the bunmapi call encounters an error,
- * return to the caller where the transaction
- * can be properly aborted. We just need to
- * make sure we're not holding any resources
- * that we were not when we came in.
- */
- xfs_bmap_cancel(&free_list);
- return error;
- }
+ if (error)
+ goto out_bmap_cancel;
/*
* Duplicate the transaction that has the permanent
* reservation and commit the old transaction.
*/
- error = xfs_bmap_finish(tp, &free_list, &committed);
- ntp = *tp;
+ error = xfs_bmap_finish(&tp, &free_list, &committed);
if (committed)
- xfs_trans_ijoin(ntp, ip);
-
- if (error) {
- /*
- * If the bmap finish call encounters an error, return
- * to the caller where the transaction can be properly
- * aborted. We just need to make sure we're not
- * holding any resources that we were not when we came
- * in.
- *
- * Aborting from this point might lose some blocks in
- * the file system, but oh well.
- */
- xfs_bmap_cancel(&free_list);
- return error;
- }
+ xfs_trans_ijoin(tp, ip);
+ if (error)
+ goto out_bmap_cancel;
if (committed) {
/*
* Mark the inode dirty so it will be logged and
* moved forward in the log as part of every commit.
*/
- xfs_trans_log_inode(ntp, ip, XFS_ILOG_CORE);
+ xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
}
- ntp = xfs_trans_dup(ntp);
- error = xfs_trans_commit(*tp, 0);
- *tp = ntp;
+ ntp = xfs_trans_dup(tp);
+ error = xfs_trans_commit(tp, 0);
+ tp = ntp;
- xfs_trans_ijoin(ntp, ip);
+ xfs_trans_ijoin(tp, ip);
if (error)
- return error;
+ goto out;
+
/*
- * transaction commit worked ok so we can drop the extra ticket
+ * Transaction commit worked ok so we can drop the extra ticket
* reference that we gained in xfs_trans_dup()
*/
- xfs_log_ticket_put(ntp->t_ticket);
- error = xfs_trans_reserve(ntp, 0,
+ xfs_log_ticket_put(tp->t_ticket);
+ error = xfs_trans_reserve(tp, 0,
XFS_ITRUNCATE_LOG_RES(mp), 0,
XFS_TRANS_PERM_LOG_RES,
XFS_ITRUNCATE_LOG_COUNT);
if (error)
- return error;
+ goto out;
}
+
+out:
+ *tpp = tp;
+ return error;
+out_bmap_cancel:
/*
- * Only update the size in the case of the data fork, but
- * always re-log the inode so that our permanent transaction
- * can keep on rolling it forward in the log.
+ * If the bunmapi call encounters an error, return to the caller where
+ * the transaction can be properly aborted. We just need to make sure
+ * we're not holding any resources that we were not when we came in.
*/
- if (fork == XFS_DATA_FORK) {
- xfs_isize_check(mp, ip, new_size);
+ xfs_bmap_cancel(&free_list);
+ goto out;
+}
+
+int
+xfs_itruncate_data(
+ struct xfs_trans **tpp,
+ struct xfs_inode *ip,
+ xfs_fsize_t new_size)
+{
+ int error;
+
+ trace_xfs_itruncate_data_start(ip, new_size);
+
+ /*
+ * The first thing we do is set the size to new_size permanently on
+ * disk. This way we don't have to worry about anyone ever being able
+ * to look at the data being freed even in the face of a crash.
+ * What we're getting around here is the case where we free a block, it
+ * is allocated to another file, it is written to, and then we crash.
+ * If the new data gets written to the file but the log buffers
+ * containing the free and reallocation don't, then we'd end up with
+ * garbage in the blocks being freed. As long as we make the new_size
+ * permanent before actually freeing any blocks it doesn't matter if
+ * they get written to.
+ */
+ if (ip->i_d.di_nextents > 0) {
/*
- * If we are not changing the file size then do
- * not update the on-disk file size - we may be
- * called from xfs_inactive_free_eofblocks(). If we
- * update the on-disk file size and then the system
- * crashes before the contents of the file are
- * flushed to disk then the files may be full of
- * holes (ie NULL files bug).
+ * If we are not changing the file size then do not update
+ * the on-disk file size - we may be called from
+ * xfs_inactive_free_eofblocks(). If we update the on-disk
+ * file size and then the system crashes before the contents
+ * of the file are flushed to disk then the files may be
+ * full of holes (ie NULL files bug).
*/
if (ip->i_size != new_size) {
ip->i_d.di_size = new_size;
ip->i_size = new_size;
+ xfs_trans_log_inode(*tpp, ip, XFS_ILOG_CORE);
}
}
- xfs_trans_log_inode(ntp, ip, XFS_ILOG_CORE);
- ASSERT((new_size != 0) ||
- (fork == XFS_ATTR_FORK) ||
- (ip->i_delayed_blks == 0));
- ASSERT((new_size != 0) ||
- (fork == XFS_ATTR_FORK) ||
- (ip->i_d.di_nextents == 0));
- trace_xfs_itruncate_finish_end(ip, new_size);
+
+ error = xfs_itruncate_extents(tpp, ip, XFS_DATA_FORK, new_size);
+ if (error)
+ return error;
+
+ /*
+ * If we are not changing the file size then do not update the on-disk
+ * file size - we may be called from xfs_inactive_free_eofblocks().
+ * If we update the on-disk file size and then the system crashes
+ * before the contents of the file are flushed to disk then the files
+ * may be full of holes (ie NULL files bug).
+ */
+ xfs_isize_check(ip, new_size);
+ if (ip->i_size != new_size) {
+ ip->i_d.di_size = new_size;
+ ip->i_size = new_size;
+ }
+
+ ASSERT(new_size != 0 || ip->i_delayed_blks == 0);
+ ASSERT(new_size != 0 || ip->i_d.di_nextents == 0);
+
+ /*
+ * Always re-log the inode so that our permanent transaction can keep
+ * on rolling it forward in the log.
+ */
+ xfs_trans_log_inode(*tpp, ip, XFS_ILOG_CORE);
+
+ trace_xfs_itruncate_data_end(ip, new_size);
return 0;
}
projects / platform / kernel / linux-3.10.git / commitdiff